unequal length of day and night

Rotation or Revolution​

A fixed mass of gas has a volume of 25 [tex]cm^3[/tex], the pressure of the gas is 100 kPa, the volume of the gas is slowly decreased by 15 [tex]cm^3[/tex] at a constant temperature, and the change in pressure of the gas is 150 kPa, which is option b.

PV = nRT (P= pressure of the gas, V =volume, n = number of moles of gas, R = gas constant, and T =temperature of the gas in kelvin)

Suppose the gas is an ideal gas and that the temperature is constant,

P1V1 = P2V2

Here P1 = 100 kPa, V1 = 25 [tex]cm^3[/tex], V2 = 10 [tex]cm^3[/tex],

100 kPa x 25 [tex]cm^3[/tex] = P2 x 10 [tex]cm^3[/tex]

P2 = (100 kPa x 25 [tex]cm^3[/tex]) / 10 [tex]cm^3[/tex]

P2 = 250 kPa

the change in pressure of the gas is,

ΔP = P2 - P1 = 250 kPa - 100 kPa = 150 kPa

The reason is that when the volume of a fixed mass of gas is decreased, the pressure of the gas increases proportionally, so here assuming that the temperature is constant it is calculated.

Hence, the volume of the gas is slowly decreased by 15 [tex]cm^3[/tex] at a constant temperature, and the change in pressure of the gas is 150 kPa, which is option b.

Learn more about the calculation of the change in pressure here.

https://brainly.com/question/15938504

#SPJ1

Answer: vinegar

A heterogeneous mixture is a mixture in which the composition is not uniform throughout the mixture. ... A heterogeneous mixture consists of two or more phases. When oil and water are combined, they do not mix evenly, but instead, form two separate layers. Each of the layers is called a phase.

Hope it helps...

Answer:

From the base unit of length, we can define volume, and from the base units of length, mass, and time, we can define energy. ... Volume. Since volume is length cubed, its SI derived unit is m3

Explanation:

Hope it helps

Answer:

sorry but i cannot understand your language, can you speak in english

answer:

6 ohms

Explanation:

if these two resistors are connected in series, the total resistance is the sum: 2+4 = 6 (ohms)

Answer:

Distance = 30 meters

Explanation:

Given the following data;

Speed = 1.5 m/s

Time = 20 seconds

To find the distance travelled;

Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.

Mathematically, speed is given by the formula;

[tex]Speed = \frac{distance}{time}[/tex]

Making distance the subject of formula, we have;

[tex] Distance = speed * time [/tex]

Substituting into the above formula, we have;

[tex] Distance = 1.5 * 20 [/tex]

Distance = 30 meters

Answer:

True

Explanation:

True ofcourse the volcanic eruption shakes the ground and may also lead the earthquakes. Technically it's just like earthquake

I hope this helps!

Answer:

9.6 minutes

Explanation:

We have that it takes Claire [tex]t=0.16h[/tex] amount of time to get to school

[tex]t=0.16h[/tex]

From the Question we are told that

Velocity[tex]v= 25 km/h.[/tex]

Distance [tex]d=4km[/tex]

Generally the equation for Time  is mathematically given as

[tex]v=\frac{d}{t}\\\\t=\frac{4}{25}\\\\t=0.16h[/tex]

For more information on this visit

https://brainly.com/question/22271063

Answer:

High in the atmosphere, air pressure decreases. With fewer air molecules above, there is less pressure from the weight of the air above. Places where the air pressure is high, are called high pressure systems. A low pressure system has lower pressure at its center than the areas around it.

Explanation:

Hope this helps you sorry if it doesn’t

Answer:

C option

Explanation:

Hope this helps... pls vote as brainliest

Answer:

230

Explanation:

You do Ke = kinetic times distance divide by mass

Answer:

In a circular motion, the object just moves in a circle. In rotational motion, the object rotates about an axis. ... For example, Earth rotating on its own axis.

Answer:

Its different

Explanation:

it's different because

Answer:

It's B = Energy ....

i hope its right

Answer:

One end of any bar magnet will always want to point north if it is freely suspended. This is called the north-seeking pole of the magnet, or simply the north pole. The opposite end is called the south pole.

Explanation:

Answer:

North Pole and South Poles

Explanation:

There is no east or west in a magnetic field of a magnet. The magnetic field lines comes from North pole to south pole.

Answer:

Heat

Explanation:

The term heat refers to the conduction process which occurs when energy is passed between objects

Answer

Heat

did quiz and got it correct

Answer:

a condenser of capacitor 50 micro coulomb is charged to 10 volt the energy stored is 5×10−3J.

Answer:

50 N.

Explanation:

From the question given above, the following data were obtained:

Mass (m) = 5 Kg

Coefficient of friction (μ) = 0.36

Normal reaction (N) =?

Next, we shall determine the weight of the body. This can be obtained as follow:

Mass (m) = 5 Kg

Acceleration due to gravity (g) = 10 m/s²

Weight (W) =?

W = mg

W = 5 × 10

W = 50 N

Finally, we shall determine the normal reaction. This can be obtained as follow:

Weight (W) = 50 N

Normal reaction (N) =?

Normal reaction = weight of the body

N = W = 50 N

Thus, the normal reaction acting on the body is 50 N

Answer:

960 m

Explanation:

Given that,

We have to find the distance covered.

Firstly, let's convert time in seconds.

→ 1 minute = 60 seconds

→ 4 minutes = (4 × 60) seconds

→ 4 minutes = 240 seconds

Now, we know that,

→ Distance = Speed × Time

→ Distance = (4 × 240) m

→ Distance = 960 m

Therefore, distance covered is 960 m.

Answer:

Force = 3.591 * 10⁵ Newton

Explanation:

Given the following data;

Mass = 5.7 * 10⁶ kg

Acceleration = 6.3 * 10^-2 m/s²

To express the force as a scientific notation;

Force = mass * acceleration

Force = 5.7 * 10⁶ * 6.3 * 10^-2

Force = 359100 Newton

In scientific notation;

A number is said to be written in scientific notation when we multiply the numbers between 1 and 10 by a power of 10.

Force = 3.591 * 10⁵ Newton

Answer:

250 kgm/s

Explanation:

To calculate momentum, simply take the product of the mass and velocity.

Answer:

tilt and revolutionary. the earth's axis is tilted by 23.5 degrees.

Its revolution because it the temperature to change thus the xhanging of seasons

Answer:

In many vibrating systems the frictional force Ff can be modeled as being proportional to the velocity v of the object: Ff = −cv, where c is called the viscous damping coefficient.

Answer:

Refer to the attachment!~

Answer:

The current through the wire is equal to 0.8 A.

Explanation:

Given that,

The length of a copper wire = 2 m

Potential difference = 24 mV

The current through the wire is 0.40 A.

The new potential difference is 48 mV.

We need to find the current through the wire.

As the potential difference is doubled for second wire. So the new current will be :

I' = 2I

= 2 × 0.4

= 0.80 A

So, the current through the wire is equal to 0.8 A.

Answer: C or B

Explanation:

The EMF induced in the wire moving perpendicularly through a magnetic field is 0.025V. The correct option is C.

The EMF is the electro motive force which causes the current to induce in the object moving in the magnetic field.

Given is the length of wire L =15cm =0.15m, magnetic field strength B = 1.4T and velocity of wire V =0.12 m/s

EMF is related to the length of wire, magnetic field strength  and velocity of wire proportionally.

ε = B x L x V

Plug the values, we get

ε = 1.4 x 0.15 x 0.12

ε = 0.025 Volts

Thus, the correct option is C.

Learn more about EMF.

https://brainly.com/question/15121836

#SPJ2

1. Fermentation is a metabolic process that produces chemical changes in organic substrates through the action of enzymes. In biochemistry, it is narrowly defined as the extraction of energy from carbohydrates in the absence of oxygen. The science of fermentation is known as zymology.

2. In general, the longer that fermentation goes on, the more sugar is converted into alcohol, resulting in a less sweet (or “drier”) and more alcoholic beverage. To produce beer, various grains are used instead of grapes as the source of sugars. ... This drying process converts the starches present in grain into sugars

Answer:

1.) Fermentation, chemical process by which molecules such as glucose are broken down anaerobically. More broadly, fermentation is the foaming that occurs during the manufacture of wine and beer, a process at least 10,000 years old.

2.) In general, the longer that fermentation goes on, the more sugar is converted into alcohol, resulting in a less sweet (or “drier”) and more alcoholic beverage. To produce beer, various grains are used instead of grapes as the source of sugars. ... This drying process converts the starches present in the grain into sugars.

Explanation:

Answer:

The laws of physics take the same form in all inertial frames of reference. As measured in any inertial frame of reference, light is always propagated in empty space with a definite velocity c that is independent of the state of motion of the emitting body.

Answer:

[tex]680\; \rm s[/tex].

Explanation:

Start by finding the total amount of energy required for melting that much ice.

[tex]\begin{aligned}&\text{Energy required for melting ice sample} \\ &= \text{Mass of Ice} \times \text{Specific Latent Heat of Ice} \\ &= 120\; \rm g \times 340\; \rm J \cdot g^{-1} = 4.08 \times 10^{4}\; \rm J \end{aligned}[/tex].

Hence, the heater would need to supply (at least) [tex]4.08 \times 10^{4}\; \rm J[/tex] of energy.

The power of the heater is [tex]60\; \rm W[/tex], which is equivalent to [tex]60\; \rm J \cdot s^{-1}[/tex], In other words, the heater is rated to supply [tex]60\; \rm J[/tex] of energy every second.

Amount of time it takes for the heater to supply [tex]4.08 \times 10^{4}\; \rm J[/tex] at [tex]60\; \rm J \cdot s^{-1}[/tex]:

[tex]\begin{aligned}\frac{4.08 \times 10^{4}\; \rm J}{60\; \rm J \cdot s^{-1}} = 680\; \rm s\end{aligned}[/tex].

Hence, it would take [tex]680\; \rm s[/tex] for the heater to melt the ice if the heater is insulated, and all the energy from the heater went to the ice.

Answer:

The will be C, but correct me if i am wrong

Answer:

D is the answer. Force can change the shape and size of an object.