Answer:
when the Moon moves into the Earth's shadow
when the Sun, Earth, and Moon are exactly or very closely aligned with the Earth between the other two, and only on the night of a full moon
Explanation:
Fill in the coefficients that will balance the following reaction: (Note: Use 1 as coefficient where appropriate.) NaCl + CaS → Na2S + CaCl2
Answer:
the answer is
2,1,1,1
Explanation:
Human reaction time is usually about 0.18 s. If your lab partner holds a ruler between your finger and thumb and releases it from rest without warning, how far can you expect the ruler to fall before you catch it? (a = -g = -9.81 m/s .) - 0.32 m ⊝ - 0.88 m ⊝ - 0.16 m ⊝ - 0.09 m ⊝ CLEAR ALL ❮ PREVIOUS
Answer:
–0.16 m
Explanation:
From the question given above, the following data were obtained:
Time (t) = 0.18 s
Acceleration due to gravity (g) = –9.81 m/s²
Height (h) =?
We can obtain how far the ruler will fall by using the following equation:
H = ½gt²
H = ½ × –9.81 × 0.18²
H = ½ × –9.81 × 0.0324
H = –0.16 m
Thus, the ruler will fall –0.16 m before you will catch it.
please help me i will give brain list
a)CH3-CH2-CH2-CH=CH2
b)CH3-CH2-CH2-CH2-CH2-CH2-CH3
c)CH≡C-CH2-CH2-CH2-CH3
d)CH3-CH2-CH2-CH2-CH2-CH2-CH=CH2
e)CH3-CH2-CH2-CH2-CH2-CH2-CH2-CH2-CH3
give me brain list
In Space, an astronaut releases a wrench from his hand. The wrench has a mass of 4 grams and is traveling with a velocity of -15m/s. The Astronaut’s mass is 70kg. What is his Velocity?
Answer:
860 cm/s
Explanation:
Let P = momentum of wrench-man system before throwing the wrench and P' = momentum of wrench-man system before throwing the wrench.
From the law of conservation of momentum,
P = P'
P = 0 (since both Astronaut and wrench were initially stationary) and P' = m₁v₁ + m₂v₂ where m₁ = mass of wrench = 4g = 0.004 kg v₁ = velocity of wrench after releasing the wrench = -15 m/s m₂ = mass of Astronaut = 70 kg and v₂ = velocity of Astronaut after releasing the wrench.
So, P = P'
0 = m₁v₁ + m₂v₂
-m₁v₁ = m₂v₂
dividing both sides by m₂, we have
v₂ = -m₁v₁/m₂
substituting in the values of the variables, we have
v₂ = -0.004 kg × (-15 m/s)/70 kg
= 0.06 kgm/s ÷ 70 kg
= 8.6 × 10⁻⁴ m/s
= 860 × 10⁻² m/s
= 860 cm/s
What kind of solution would you have if it contained 50 grams of sodium chloride in 100 mL of water at 30˚C?
Answer:
Supersaturated solution.
Explanation:
Hello!
In this case, according to the types of solution in terms of the relative amounts of solute and solvent, we can define a point called solubility at which the amount of solute is no longer dissolved in the solvent; thus, a value of solute/solvent less than the solubility is related to unsaturated solutions, equal to the solubility is related to the saturated solutions and more than the solubility to supersaturated solutions.
Thus, since solubility is temperature-dependent, at 30 °C the solubility of sodium chloride is 36.09 g per 100 mL of water; which means that, since the solution has 50 g of sodium chloride, more than 36.09 g, we infer this is a supersaturated solution.
Best regards!
A subrule of the Cahn-Ingold-Prelog system specifies that higher mass number takes precedence over lower when distinguishing between isotopes. Determine the absolute configurations of the reactant and product in the biological oxidation of isotopically labeled ethane.
Answer:
The correct answer is - S- configuration.
Explanation:
Placing the numbers in order of the priorities of each reactant in the reaction is essential to determining the configuration of the reactant and product in the biological oxidation of isotopically labeled ethane.
CH3 - T- D is the correct order of the increasing of the priorties. so this is moving from CH3 to D which is Anti-clockwise which means the configuartion is S as we know clockwise movement is R configuarion and anti-clockwise in S configuartion.
A. An atom loses one electron. What is the overall charge now?
Answer:
it losses one neutrons that is hydrogen
write down any four uses of solution
.I will mark him\her as brilliant
Answer:
because it will help u
because it will make u to understand the question very well
Can you please help on 17 and 18 pleaseeee
Answer:
17. Yes, it represents a chemical reaction. This is because new substances were formed from the original substance.
18. (a) Formation of new substances
(b) Evolution or absorption of large quantity of heat
(c)Change in mass of substances
Explanation:
17. In the model above, molecules of a compound of carbon and hydrogen (molecular formula is C2H6) combines with molecular oxygen (O2) to produce two new substances; a compound composed of two oxygen atoms and one carbon atom (CO2) and another compound composed of two atoms of hydrogen and one atom of oxygen (H2O). Since the new substances formed are completely different from the original substances, it a chemical reaction. Also, a large volume of heat would have been given off.
18. To determine if a chemical reaction has occurred, the following observations can be looked out for.
a. Formation of new substances different entirely from the original substances
b. Evolution or absorption of large quantity of heat during the change. Check whether the vessel containing the substances gets hotter or colder.
c. Change in mass of substances. Since new substances are formed in a chemical reaction, there is usually a significant change in mass of the products and reactants.
What is the mass in grams of 12.9 moles of water, H2O?
Answer:
232 g.
Explanation:
12.9 mol x 18.106g = 232 g H₂O
Ammonium phosphate is an important ingredient in many solid fertilizers. It can be made by reacting aqueous phosphoric acid with liquid ammonia. Calculate the moles of ammonia needed to produce of ammonium phosphate. Be sure your answer has a unit symbol, if necessary, and round it to significant digits.
Answer:
The balanced chemical equation:
3 NH₃ + H₃PO₄ → (NH₄)₃PO₄
From the equation we see:
3 moles of NH₃ gives 1 mole (NH₄)₃PO₄
0.085 mole NH₃ will gives ?? mole (NH₄)₃PO₄
By cross multiplication:
number of moles of (NH₄)₃PO₄ = 0.085 * 1/3 = 0.028 mole
Explanation:
What is the volume of a sample that has a mass of 20 grams and density of 4 g/mL?
Answer:
5 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question we have
[tex]volume = \frac{20}{4} \\ [/tex]
We have the final answer as
5 mLHope this helps you
You have two options for this task.
Option 1: Create your own stage or film interpretation of one scene or chapter from Journey to the Center of the Earth, write it out in script or screenplay format, or you can actually film it and upload it to your instructor. You can conduct an Internet search for sample scripts or screenplays to help you with the basics of formatting.
Remember, you are only doing one section. Pick a chapter and go to town!
Option 2: Write an analysis of how the filmmakers of one of the adaptations chose to recreate the movie. Pick a scene — for example, the desperate search for water — and describe and explain how the filmmakers adapted the novel. What parts did they keep? What parts did they change? Why do you think they did that? Do you agree with those decisions? Do you think they made for a better movie? Why or why not?
Write these answers up in a 2 paragraph essay and submit it to your instructor.
Answer:
Option 1
Explanation:
Harry: *wakes up and finds himself at the bottom of a mountain slope and asks, "Where are we?"
Harry: "Are we in Iceland?"
Hans: "Nej."
The Professor: *Gets up and says, "what do you mean? No----What are your reasons?"
Harry: *Rises* "No, Hans is wrong."
After all the innumerable surprises of this journey, a yet more singular one was reserved to us. I expected to see a cone covered by snow, by extensive and widespread glaciers, in the midst of the arid deserts of the extreme northern regions, beneath the full rays of a polar sky, beyond the highest latitudes.
*Time passes while we try to figure out what is happening and where we are. Harry finds that he was saved from death because Hans had saved him.*
Atoms of the same element with a
different number of neutrons
are called______________
when a neutral atom gains or loses
electrons, it becomes charged
and is called ain)!______________
Answer:
isotopes for the first blank space
Which pair of dispersed phases and dispersing media can never form a colloid?
Select one:
O a. solid and gas
O b. liquid and gas
O c. solid and solid
O d. liquid and liquid
O e. gas and gas
Answer:
Option B Liquid and Gas
The boiling point of CH3OCH3 would be________ the boiling point of CH3CH2OH.
A)lower than
B) equal to
C) higher than
can someone explain this please?
Answer:
A. Lower than
A 283.3-g sample of X2(g) has a volume of 30 L at 3.2 atm and 27 'C. What is element X?
we find the number of moles with the formula
pV=nRT
27C=300k
3.2*30=n*0.082*300
n=96/24.6=3.9 moles
we have the mass ant the number of moles so we can calculate the molar mass
283.3/3.9=72.64g/moles
that means X's mass is 72.64/2=36.3 so the element is Kr(Kriptonium)
can someone answer that for me
Answer:
4^4, or 256
Explanation:
When dividing numbers with exponents and the same base, you will subtract from the exponents and keep the base the same.
You are comparing a reaction that produces a chemical change and one that prouduces a physical change. What evidence could you use to determine wich type of change is occurring?
Answer: If the reaction is a chemical change, new substances with different properties and identities are formed. This may be indicated by the production of an odor, a change in color or energy, or the formation of a solid.
hope it helps!!
How many valence electrons does selenium have?
Answer:
six electrons
Explanation:
The six electrons in the outermost shell allow selenium to have a variety of valence numbers. Selenium compounds have been found that have valences of -2, 4, and 6. Speaking of the number six, selenium is found to have six naturally occurring isotopes.
heyyy Powerpuff girls! what advantage does globe maps have over a flat map?
Answer:
The advantage of the globe is that it promotes visual accuracy. Students need to use a globe frequently if they are to form accurate mental maps. The advantage of the world map is that you can see the entire world at one time. The disadvantage is that world maps distort shape, size, distance, and direction.
Explanation:
miss girl- you could've just looked this up
(just make it look like you typed it)
Answer:
The advantage of the globe is that it promotes visual accuracy. Students need to use a globe frequently if they are to form accurate mental maps. The advantage of the world map is that you can see the entire world at one time. The disadvantage is that world maps distort shape, size, distance, and direction.
Friend?
Explain in brief how the non-covalent weak interactions play a major role in biomolecular structure.
Answer:
See explanation
Explanation:
Many bimolecuar structures are formed by non-covalent interactions such as hydrogen bonding.
A typical example that comes in handy here is the bimolecular structure of acetic acid. In the structure of acetic acid, we notice that the molecule exists as dimmers. This dimmeric structure accounts for its high boiling point.
The dimmeric structure stems from non-covalent hydrogen bonded interaction between acetic acid molecules as shown in the image attached.
describe the effect of subjecting hydrogen to pressure
Answer:
When hydrogen is subjected to large enough pressure, it solidifies according to theory.
Explanation:
According to theory, when hydrogen molecules are subjected to enormous degree of pressure the molecules will solidify.
What happens here is that the hydrogen–hydrogen bonds in the hydrogen molecule will break apart and the molecules collapses into hydrogen atoms.
Hence, when hydrogen is subjected to large enough pressure, it solidifies according to theory.
Ren runs a hamburger stand and needs to clean up a season’s worth of grease buildup on the range hood over his griddle. Explain what he should look for in a cleaning product that can handle a layer of grease.
Answer:
A simple mix of baking soda, kosher salt, and dish soap
Explanation:
I don't know why you would need to know this but the stuff mentioned above should get rid of the grease
Answer:
Sample Response for Edge2021: Ren should use a cleaning product that contains a base. This is because bases readily react with lipids, the kind of compound that makes up grease. A base would break down the grease, forming soap, which would then easily wash away.
Explanation:
Rank the following in terms of increasing boiling point:_______. CH3CH2OCH2CH3 CH3CH2OCH3 CH3CH2CH2CH3 CH3CH2CH2CH2NH2 a. CH3CH2CH2CH2NH2 < CH3CH2CH2CH3 < CH3CH2OCH3 < CH3CH2OCH2CH3 b. CH3CH2CH2CH3 < CH3CH2OCH2CH3 < CH3CH2OCH3 < CH3CH2CH2CH2NH2 c. CH3CH2OCH3 < CH3CH2CH2CH3 < CH3CH2OCH2CH3 < CH3CH2CH2CH2NH2 d. CH3CH2CH2CH2NH2 < CH3CH2OCH2CH3 < CH3CH2OCH3 < CH3CH2CH2CH3 e. CH3CH2CH2CH3< CH3CH2OCH3< CH3CH2OCH2CH3< CH3CH2CH2CH2NH2
Answer:
CH3CH2CH2CH3 <CH3CH2OCH3<CH3CH2OCH2CH3< CH3CH2CH2CH2NH2
Explanation:
Some important factors affect the boiling point of aliphatic compounds. Prominent among them are;
1) relative molecular mass
2) nature of intermolecular
3) surface area of compound.
In this case, the nature of intermolecular forces and the molecular mass of the compounds are worthy of mention.
The degree of dipole interaction in CH3CH2CH2CH2NH2 is far greater than that in the ethers hence the amine has the highest boiling point followed by the ether of higher molecular mass then the ether of lower molecular mass and finally the alkane has the lowest boiling point because only dispersion forces are involved.
The correct ranking of the given organic compounds from highest to lowest boiling points is given by;
Option D; CH3CH2CH2CH2NH2 < CH3CH2OCH2CH3 < CH3CH2OCH3 < CH3CH2CH2CH3
We are given the organic compounds;
CH3CH2OCH2CH3
CH3CH2OCH3
CH3CH2CH2CH3
CH3CH2CH2CH2NH2
The family names of the given organic compounds are;
CH3CH2OCH2CH3 is an ether
CH3CH2OCH3 is an ether
CH3CH2CH2CH3 is an alkane
CH3CH2CH2CH2NH2 is an amine
The boiling points are given in the order from highest to lowest as;
Alkanes < Ethers < Amines
This is because Amines have higher possibility of hydrogen bonding than the others.
Lastly, a longer chain ether will have a higher boiling point than the shorter chain one because it can have more Vander walls force interactions.
Thus, the correct order of arrangement of the given organic compounds from highest to lowest boiling point is;
CH3CH2CH2CH2NH2 > CH3CH2OCH2CH3 > CH3CH2OCH3 > CH3CH2CH2CH3
Read more about ranking of organic compounds according to boiling points at; https://brainly.com/question/13708633
PLEASE HURRY IM BEING TIMED time: 1:55:40
Which number belongsin the space labeled X?
O5
O7
O8
O 10
Answer:
a.) x = 5
Explanation:
what is the meaning of the word hydrocarbons
Answer:
An organic compound (such as acetylene or butane) containing only carbon and hydrogen and often occurring in petroleum, natural gas, coal, and bitumens.
Explanation:
Iooked it up
I want a Huge conversation about planets (kid friendly)
Answer:
Plants are made of gas and mass
Answer:
hello again :-)))))))
What is electronegativity
Answer:
Electronegativity, symbol χ, measures the tendency of an atom to attract a shared pair of electrons (or electron density). An atom's electronegativity is affected by both its atomic number and the distance at which its valence electrons reside from the charged nucleus. The higher the associated electronegativity, the more an atom or a substituent group attracts electrons.
What is the rate constant of a reaction if rate = 1 x 10-2 (mol/L)/s, [A] is 2 M,
[B] is 3 M, m = 2, and n = 1?
k=
rate/[A]" [B]"
The rate constant of a reaction : 8.3 x 10⁻⁴
Further explanationGiven
rate = 1 x 10⁻² (mol/L)/s, [A] is 2 M, [B] is 3 M, m = 2, and n = 1
Required
the rate constant
Solution
For aA + bB ⇒ C + D
Reaction rate can be formulated:
[tex]\large{\boxed{\boxed{\bold{r~=~k.[A]^a[B]^b}}}[/tex]
the rate constant : k =
[tex]\tt k=\dfrac{rate}{[A]^m[B]^n}\\\\k=\dfrac{1.10^{-2}}{2^2\times 3^1}\\\\k=8.3\times 10^{-4}[/tex]
Answer:
8.3x10^10-4
Explanation:
a p e x