Un objeto se mueve con una rapidez constante de 8 m/s. Esto significa que el objeto: a) Aumenta su rapidez en 8m/s cada segundo b) Disminuye su rapidez en 8m/s cada segundo c) No se mueve d) Tiene aceleracion positiva e) se mueve 800 cm cada segundo

Answers

Answer 1

Explanation:

Constant speed means that the object is covering equal distance in equal interval of time. The motion is called uniform motion for such case. In this problem, it is given that an object is moving with a constant speed of 8 m/s. It means that it does not change its speed. It is moving with a single speed constantly.

We can say that it moves 8 meters every second or 800 cm every second.


Related Questions

Pelo nossa observaçao do cotidiano,podmos perceber facilmente que se uma pedra for largada do alto de um predio , ele ira se deslocar em direçao ao solo ,enquanto que a fumaça produzida pela queima da madeira sobe para os ceus. Como aristosteles explicava estes movimentos?

Answers

Answer:

Esses movimentos são movimentos naturais.

Explicação:

Se uma pedra cair do topo de um telhado ou edifício, a pedra se moverá em direção à terra, enquanto a fumaça produzida devido à queima da madeira vai para cima, então de acordo com Aristosteles esses tipos de movimento são chamados de movimento natural porque de acordo à definição de movimento natural que não requer nenhuma força, então esses dois movimentos também se movem na direção para baixo e para cima sem usar qualquer força, então podemos dizer que esses movimentos são naturais.

Calculate the acceleration of a 23.9 kg mass when a net force of 158N north acts on it. Answer is 6.61ms^-2 north. Need to know how to get there.

Answers

Answer:

formula F = m * a

Explanation:

F = m * a

F = force = 158 N

m = mass = 23.9 kg

a = acceleration

158 = 23.9 * a

a = 158 / 23.9

a = 6.61m/s²

therefore,  use the formula F = m * a

a body of mass 0.5kg is shot vertically into the air with an initial speed of 45m/s
, calculate the time taken to reach the maximum height

Answers

Answer:

The time to reach the maximum height is approximately 4.59 seconds

Explanation:

The maximum height in a problem where friction with the air is neglected, only needs the kinematic information of the initial velocity at which the object was launched vertically.

Recall that the formula for the velocity of an object under constant acceleration ([tex]a[/tex]) in terms of time (t) is given by:

[tex]v(t)=v_0+a\,\,t[/tex]

where [tex]v_0[/tex] is the initial velocity of the object (in our case the speed at which it was launched up in the air = 45 m/s)

Considering that the acceleration the object is subjected (which is the acceleration of gravity g = 9.8 m/s^2) is acting in opposite direction to the initial velocity of the object, we make sure to include a negative sign in the formula:

[tex]v(t)=v_0+a\,\,t=v_0-g\,\,t[/tex]

then, considering that at the time the object reaches its maximum height, is when it stops and starts it motion back towards earth, that is the point at which the object's velocity is zero. Then we can solve for the time as follos:

[tex]0=v_0-g\,\,t\\g\,\,t=v_0\\t=\frac{v_0}{g} \\t=\frac{45}{9.8} \\t\approx 4.59\,\,sec[/tex]

What is the force per meter of length on a straight wire carrying a 6.40 A current when perpendicular to a 0.9 T uniform magnetic field

Answers

Answer:

5.76 N/m

Explanation:

From the question,

F = BILsinФ...................... Equation 1

and then,

F/L = BIsinФ.................. Equation 2

Where F/L = force per meter, I = current, B = magnetic field, Ф = angle.

Given: B = 0.9 T, I = 6.4 A, and Ф = 90° (Perpendicular)

Subtitute these values into equation 2

F/L = 0.9(6.4)(sin90°)

F/L = 5.76 N/m

The force per meter of length on a straight wire will be 5.76 N/m.

What is a magnetic field?

It is the type of field where the magnetic force is obtained. With the help of a magnetic field. the magnetic force is obtained it is the field felt around a moving electric charge.

The given data in the problem si;

B is the megnetic field=0.9 T

I is the current = 6.4 A,

Ф is the angle = 90° (Perpendicular)

The megnetic field is found as;

[tex]\rm F= BILsin \phi \\\\ \frac{F}{L} =BIsin\phi \\\\ \frac{F}{L} =0.9 \times 6.4 \times sin 90^0\\\\ \frac{F}{L} =5.76 / N/m[/tex]

Hence the force per meter of length on a straight wire will be  5.76 N/m.

To learn more about the magnetic field refer to the link;

https://brainly.com/question/19542022

A net force of 10 N accelerates an object at 5.0 m/s^2. What is the mass of the object? A. 2 kg B. 10 kg C. 5 kg D. 20 kg

Answers

Answer:

A. 2 kg

Explanation:

[tex]Force = 10N\\Acceleration = 5.0m/s^2\\Mass = ? = x\\Force = mass\times acceleration \\10 = x \times 5\\10 = 5x \\\frac{10}{5} =\frac{5x}{5} \\2=x\\\\Mass= 2kg[/tex]

Consider the pendulum. At what point is the kinetic energy the greatest?

Answers

Answer:

B

Explanation:

B is the mean position.At the mean position, the velocity of the particle in S.H.M. is maximum and displacement is minimum, that is, x=0. Therefore, K.E. = 1/2 k ( a² – x²) = 1/2 k ( a² – o²) = 1/2 ka². Thus, the maximum kinetic energy is expressed by K.E = ½ ka²

Answer:

Point B is the location of the greatest kinetic energy. This is the point where the pendulum is moving with the greatest velocity.

Explanation:

Identify two properties of a star that can be determined from its spectral class

Answers

Answer:

temperature and relative motion

Explanation:

How long is the racetrack if it takes a racecar 3.4 s travelling at 75 m/s to finish?​

Answers

Answer:

255 metres

Explanation:

The answer to thi question is actually quite simple. Since the car goes for 3.4 seconds, and it goes 75 metres every second, the answer is just 3.4 multiplied by 75 Metres.

Which of the following is a limit of science? (2 points) a The technology or tools available to test scientific claims b The number of times an experiment can be repeated c The total number of scientists in a field, like physics or chemistry d The use of critical thinking and evidence to study phenomena

Answers

Answer: A- The technology or tools available to test scientific claims. I just took this test and passed.

When do we represent objects like a point like object?

Answers

It is represented when it’s a tiny object that can be calculated or counted as dot object to simplify the calculations

Since all stars begin their lives with the same basic composition what characteristics most determines how they will differ

Answers

Answer:

Mass they are formed with

Explanation:

All stars are born with the same composition such as one quarter of helium, three quarter of hydrogen, and heavier element does not found more than two except their mass. Mass that differ all stars from other stars they born with. How much the mass of a star is large , the star would be as messy.

For example our sun is a star and have large mass four times greater than other living stars. It is found that smallest mass is around 1/12th of sun mass. The masses of a star is determined by its orbit binary. Sun is called a brown dwarf.

Attempt 3 of 2
SECTION 10F1
QUE
1 2 3 4 5 6 7
>
Which of the following will stay constant, no matter if the substance is in the solid, liquid, or gas state?
volume
shape
temperature
mass



Answers

Answer:

mass.

Explanation:

other physical factors are changeable but the mass of a particular substance is always constant.

What is the more common term for a quantitative
observation?

Answers

Answer:

Measurement

Explanation:

Scientific research require observation and there are two types of observations, quantitative and qualitative observation

Collecting quantifiable data that is possible to be expressed in a number format is said to be a quantitative observation

Quantitative observation can also be described as observations that are defined by both words and numbers and they are therefore more useful than qualitative observations that involve only words

Quantitative observations involve expressions of variables that are quantifiable, that is material hat can be expressed in numbers.

Answer:

Measurement

Explanation:

if you’re doing ck12 it’s the right answer

If a tennis ball has a velocity of 18 m/s and a momentum of 1.06 kg. m/s, what is the mass of the tennis ball in grams?
Round the answer to two significant figures.
Blank grams

Answers

Answer:

59g

Explanation:

The tennis ball with a velocity of 18 m/s and momentum of 1.06 kg m/s then the mass of the tennis ball in grams will be 59 grams (approx) two significant figures.

What is Momentum?

Regardless of the frame of reference, momentum is a conserved quantity in any inertial frame, which means that if an enclosed system is not subject to outside influences, its total linear momentum remains constant.

Additionally, momentum is preserved in general relativity, electrodynamics, quantum mechanics, quantum field theory, and special relativity (using a modified formula). It is a manifestation of translational symmetry, one of the basic symmetries of space and time.

According to the question, the given values are :

Velocity, v = 18 m/s

Momentum, p = 1.06 kg m/s

p = m × v

1.06 kg m/s = m × 18 m/s

m = 1.06 / 18

m = 0.0589 kg or

m = 58.9 grams or 59 grams approx in two significant figures.

So, the mass will be 59 grams.

To get more information about Momentum :

https://brainly.com/question/4956182

#SPJ5

determine the density in si unit of a solid of mass 40g with dimension 30cm by 4cm by 3cm​

Answers

Answer:

Density = 0.111 g/cm^3

Explanation:

Given that

Make m = 40g

The given dimension are 30cm by 4cm by 3cm

Volume V = 30 × 4 × 3 = 360 cm^3

Density is the ratio of mass to volume.

That is,

Density = mass/volume

Substitute mass and volume into the formula

Density = 40/360

Density = 0.1111 g/cm^3

An object accelerates 20.8 m/s2 when a force of 8.9 newtons is applied. What is the mass of the object?

Answers

Answer: 0.43kg

Explanation: a = 20.8m/s^2

                      F = 8.9N

                      m = ?

F = ma

8.9 = 20.8m

m = 8.9/20.8

= 0.43kg

Hope this helped..

By definition, a molecule carries a net charge of _____.

Answers

A molecule Carries a net charge of protein

Give reasons:
1. The unit of pressure is a derived unit.​

Answers

Explanation:

The units of pressure is called derived units because it is simply derived from base unit which is distance and a derived unit which is force, which is derived from acceleration, a derived unit as well, and mass, a base unit. As we all know, work is defined as the force x distance. Thus making work a derived unit.

FOR 30 points

Part 3
What single property was the most important in Jesseca's material?

Answers

Answer:

Jesseca wanted to create a material that reflected most of the light that fell on it.

Explanation:

Plato Answer

Answer:

this is the exact answer on Edmentum...

Explanation:

Jesseca wanted to create a material that reflected most of the light that fell on it.

During which step of the scientific method does a scientist make an educated
guess about the outcome of an experiment?
A. Collect data
B. Form a hypothesis
C. Analyze the results
D. Design an experiment

Answers

Answer:

form a hypothesis

Explanation:

What does perseverance mean to you?

Answers

perseverance to me is being persistent in doing something despite it being difficult and achieving it in success
It means persistence in doing something despite difficulty or delay in success

How many atoms of hydrogen are there in one molecule of water, if the chemical formula is H2O? 0 1 2 3

Answers

Answer:

2

Explanation:

H2O has -

2 hydrogen atoms

1 oxygen

Answer: 2

Explanation:

A waiter is carrying a tray above his head and walking at a constant velocity. If he applies a force of 5.0 newtons on the tray and covers a distance of 10.0 meters, how much work is being done?

Answers

Answer:

0 J

Explanation:

Work is the dot product of force and displacement.  In other words, it is the force times the distance traveled in the direction of the force.

W = Fd cos θ

In this case, the force is vertical and the displacement is horizontal.  So the angle between them is θ = 90°.  The work done is:

W = (5.0 N) (10.0 m) cos(90°)

W = 0 J

based on what you have just read,why is studying atoms and their parts and particles helpful to people

Answers

The study of atomic structure helps us understand more about the way the universe is constructed, how our bodies are made, and the components of life, which we can apply to other sciences in the fields of health and disease prevention, fuels, product industry etc... It basically helps us to understand how we can make new things and how to utilize the power of the universe.

Answer: Studying atoms is important because knowledge about atoms helps people to understand the world around them and produce materials used in daily life. Also, research done on atoms has contributed to the improvement of people's lives through medicine, to the protection of the environment, and to the discovery of new things about the world and the universe.

Explanation:

I did the test

What steps should be taken when using a fire extinguisher? pull, aim, squeeze, spread pull, arm, search, spread push, aim, spread, squeeze push, arm, spread, search

Answers

Answer: pull,aim,squeeze,spread

Explanation:

who was albert einstien describe his contributions???

Answers

Answer:

Albert Einstein was from Germany he was born theoritical physicist, from childhood only he loved mechanical toys, he was highly gifted in Mathematics, He was a world citizen and a scientific genius too. His contribution were:

1) he developed the theory of relativity

2) he also discovered the process of nuclear fission

3)he developed the quantum theory of specific heat

4)theory of stimulated emission, on which laser device technology is based

5) law of photoelectric effect

hope it helped you :)

Which force affect the movement of aeroplane and ship?​

Answers

For aeroplane are lift,weight,thrust and drag
For ships are inertia,drag,buoyancy and gravity

a. In what frame of reference does special relativity apply?
b. In what frames must general relativity be used?
c. Describe what happens to time and length at speeds close to the speed of light.

Answers

Answer:

a. The Special relativity postulate states that the laws of physics apply  in all inertia frames of reference

b. General relativity must be uses a curved space-time

c. Time is dilated for a stationary observer relative to one in motion

Time interval observed on an object in a moving frame of reference is less than the same interval observed on a stationary reference frame

[tex]\Delta t' = \dfrac{\Delta t}{\sqrt{1 - \dfrac{v^2}{c^2}}}[/tex]

Length is contracted

The length of a rod moving with a velocity relative to an observer will appear contracted by a factor [tex]\sqrt{1 - \dfrac{v^2}{c^2}}[/tex], in the direction of the motion.

Explanation:

a homer in in a baseball game was measured at 450 feet. how many meters is this equal to?

Answers

137.16



hopes it helps







In which place moutain or terai,the value of g is more and why?​

Answers

Answer:

the radius of the earth in himalayan region is greater than terai reagion. therefore, the value of 'g' at the poles is greater than the value of g at the equator. 12

Explanation:

plz mark as brainlist thx :)

Other Questions
-4 + (-1) on a number line ASAPPPPP -2.0 * (-3.6) A box contains 84 chocolates, of which 63 are dark chocolate. The rest are milk chocolates. What is the ratio of milk chocolates to the total number of chocolates in the box? A hydraulic press has one piston of diameter 4.0 cm and the other piston of diameter 8.0 cm. What force must be applied to the smaller piston to obtain a force of 1600 N at the larger piston Find the side of a square, whose area is equal to the area of a rectangle with sides 6.4m and 2.5m. Also find the perimeter of the square. Calculate the force that must be applied to an object weighing 25 pounds for it to be in equilibrium, if it is on a plane inclined at 45 pls do this!! scientific method A liter of water contains about (first image) molecules. A certain river discharges about (second image) L of water every second. About how many molecules does the river discharge every minute? Write your answer in scientific notation. What is the horizontal distance from the origin to the point (1, 4) Due to poor grades in high school this manwas rejected all three times he applied to theUniversity of Southern California.What is the guys name In they story The man in the well how to the childrens interactions with the man in the well reveal the theme of the text ? Use at least two pieces of evidence in your response l () - ---------------------- l () ---------------------- l() -------------------------- l() ------------------------ l Two sources emit beams of light of wavelength 550 nm. The light from source A has an intensity of 10 W/m2, and the light from source B has an intensity of 20 W/m2. This is all we know about the two beams. Which of the following statements about these beams are correct? A) Beam B carries twice as many photons per second as beam A. B) A photon in beam B has twice the energy of a photon in beam A. C) The frequency of the light in beam B is twice as great as the frequency of the light in beam A. D) A photon in beam B has the same energy as a photon in beam A. E) None of the above statements are true. find the distance between a point (6,9) and a horizontal line at y=5 I need help in making sentences you must be thinking that this is weird and dumb but can you make an easy sentence of the word perceptible plz 10g = __________ mg? * Josh weighed cantaloupes he picked from his garden. This line plot shows the cantaloupe weights. What is the total weight of all the cantaloupes that weigh no more than 2 pounds? 712 lb 10 lb 15 lb 20 lb Romona Company expects its November sales to be % higher than its October sales of . All sales are on credit and are collected as follows: % in the month of the sale and % in the following month. Purchases were in October and are expected to be in November. Purchases are paid % in the month of purchase and % in the following month. The cash balance on November 1 is . The cash balance on November 30 will be Which value goes in the empty cell? A switch operates in the OSI reference model __________ layer and uses the __________ address to forward packets.