Uh yah I’ll give you the crown thingy! And extra points:)

Answer:

Cautiously and avoiding filling in the central area so that it does not overflow when filling, since being very beach makes filling difficult.

Explanation:

The basins are shallow, that is why filling is difficult, the filling must be slow, low intensity and at the edges not placing the water filling in the center of the basin.

When you fill a basin with liquid water, you can see that the water takes the shape of the container in which it is contained. This is because in the liquid state, water has molecules farther apart than in the solid state.

You can notice this property when performing an experiment with liquid and solid water.

When filling a glass, liquid water takes on the shape of a glass, and solid water, such as an ice cube, remains the same shape when placed in a glass.

Therefore, when filling a basin with water we perceive a property of the physical state of water, in liquid form. Water is one of the few substances that can be found naturally in liquid, solid and gaseous states.

Learn more here:

https://brainly.com/question/23650420

Answer:

1(a) Second order

1(b) 44.0 minutes

2(a) Ea, forward = 85.6 kJ/mol

Ea, reverse = 60.1 kJ/mol

3) k = 9.47 M⁻¹s⁻¹

Explanation:

1(a) We are given mass of product vs time.  We need to find the concentration of reactant.

For example, at t = 0 min, there is 0 g of product.  Therefore, there is 22.9 g − 0 g = 22.9 g of reactant.  The molar mass is 60 g/mol, so there is (22.9 g) / (60 mol/g) = 0.382 mol.  The volume is 1.0 L, so the concentration is (0.382 mol) / (1.0 L) = 0.382 M.

Next, we'll graph [A] vs time, ln[A] vs time, and 1/[A] vs time.

From the graphs, we can see that 1/[A] is linear.  That means the reaction is second order.

1(b) The slope of the line is equal to the rate constant k.

k = 0.0596 M⁻¹min⁻¹

The half life is:

t = 1/(k [A₀])

where [A₀] is the initial concentration of reactant.

t = 1 / (0.0596 M⁻¹min⁻¹ × 0.382 M)

t = 44.0 min

(Notice the mass of product approximately doubles from t = 20 min to t = 45 min.  This confirms that the half life is about 44 minutes.)

2(a) To make an Arrhenius graph, we need to graph ln(k) vs 1/T, where T is temperature in Kelvin.  We'll make two graphs, one for ka (the forward reaction) and one for kb (the reverse reaction).

The slope of each line is -Eₐ/R, where R is the gas constant.  For the forward reaction:

Eₐ = -8.314 × -10300 = 85,600 J/mol = 85.6 kJ/mol

For the reverse reaction:

Eₐ = -8.314 × -7227.6 = 60,100 J/mol = 60.1 kJ/mol

2(b) Make a graph showing the energy changes as the reaction goes from the reactants to the products.  The difference between the reactants and the highest point is the forward activation energy.  The difference between the products and the highest point is the reverse activation energy.

3) Like problem #1, we're going to graph [A], ln[A], and 1/[A] vs time.

Once again, 1/[A] vs t is linear, so this is a second order reaction.

The rate constant is the slope of this line, so k = 9.47 M⁻¹s⁻¹.

Answer:

i wish i could help but people are around me

Explanation:

Answer:

Explanation:

The protein comprises of two 60-kD polypeptides and two 40-kD polypeptides. Each one of the 40-kD chains has a disulfide-bond, which is directly bonded to a 60-kD chain.

The 100-kD units attach noncovalently to produce a protein with a molecular mass of 200 kD.

The protein consists of 200 kD in size, and the Gel filtration doesn't affect the relationship and interaction among the various subunits in the protein.

When SDS-PAGE takes place, samples are being subjected to boiling of samples and therefore undergoing denaturation conditions. The result causes disorganization in the 100 kD units.

It implies that BME is responsible for the reduction between the R1-S-S-R2 bond between 40 kD and 60 kD to R1-SH and R2-SH, resulting in separate proteins.

However, the reducing agent (BME) main task is reducing disulfide bonds in a protein.

Answer:

19.6 J

Explanation:

According to the formula:

M.E.= mgh

Answer:

Pure Water.

Explanation:

Solutions with a pH of 1-6 are considered acidic. Solutions with a pH of 8-14 are considered basic. Solutions with a pH of 7 are considered neutral.

Answer: PbSO4

Explanation: Search on google

Answer:

PbSO4

Explanation:

Answer:

A

Explanation:

All of the other options involve cities, farmers, or companies. Those aren't natural occurrences, so A is the answer. The mangroves protect the village without anything being modified about that environment.

Answer : C

Explanation:

a star produces energy by combining two atoms into one creates a powerful burst of energy

Answer:

A. Gases;nonreactive

Explanation:

No ur not stupid, lol hope this helps!

Answer:

other dude is right also you aren't  another thing sorry I be late

Explanation:

Answer:

17.94 annd 27.69 respectively.

Explanation:

Na(s) + Cl(g) n` NaCl(s)

mass of NaCl = 45.6 g

Mr of NaCl = 23 + 35.5

= 58.5g/mol

mole of NaCl = mass/Mr

= 45.6/58.5

= 0.78 moles

From the equation;

1 mole of NaCl = 1 mole of Na = 1 mole of Cl

hence 0.78 mol of NaCl = 0.78 mol of Na = 0.78 mol of Cl.

mass of Na = 0.78 × 23

= 17.94 grams

mass of Cl = 0.78 × 35.5

= 27.69 grams

The mass of the sodium and chlorine gas taken for the reaction was  17.92 grams and 27.73 grams​ respectively.

Sodium chloride is an ionic compound in which the sodium (Na⁺) and chloride (Cl⁻) ions are present in a ratio of 1 : 1. It is commonly known as table salt or halite.

Sodium and chlorine react with each other to generate a substance that is familiar to everybody around the globe which is sodium chloride.

2Na (s)   +   Cl₂ (g)   [tex]\longrightarrow[/tex]    2NaCl (s)

The atomic mass of the sodium (Na) = 23 g/mol

The atomic mass of chlorine,(Cl) = 35.5 g/mol

The molar mass of the sodium chloride (NaCl) = 58.5 g/mol

Given, the mass of the NaCl formed = 45.6 g

If 117 g NaCl formed from sodium = 2× 23 g

Then 45.6 NaCl will be formed from Na = 17.92 g

If 117 g NaCl formed from chlorine = 2× 35.5 g

45.6 NaCl will be formed from chlorine = 2× 35.5 ×45.7/117 = 27.73 g

Learn more about sodium chloride, here:

https://brainly.com/question/9811771

#SPJ2

Answer:

5

Explanation:

Answer:

Oxygen

Explanation:

Photosynthesis releases oxygen into the atmosphere and cellular respiration uses that oxygen to release energy from food.

Answer: Pizza

Explanation: Pizza

Answer:

Shiver me timbers its pizza

Explanation:

Answer:

Number of replacable H

+

ions in H

2

SO

4

=n=2

Normality =n× Molarity=2×2=4 N

Answer:

Explanation:

Butane is an alkane with the molecular formula C₄H₁₀.

(a) It has two structural isomers (n-butane and 2-methylpropane) shown below

     H   H   H   H

      |     |     |     |

H - C - C - C - C - H

      |     |     |     |

     H   H   H   H

The structure above is n-butane

     H     CH₃ H

      |       |       |

H - C  -  C  -  C - H

     |       |       |

    H     H     H

The structure above is 2-methylpropane and can also be referred to be a tertiary butane because the central carbon atom has 3 methyl groups attached to it as shown below.

        CH₃

         |

H₃C - C - CH₃

         |

        H

Hence, the structure of a tertiary butyl radical after loss/removal of a hydrogen atom will be

         CH₃

          |

H₃C - C⁻ - CH₃

NOTE: It should be noted that the central carbon becomes negatively charged after the loss of the hydrogen atom

(b) This is the practical part of the structure drawn above. The last structure illustrated above can be drawn on the canvas with the instruction provided in the question.

Answer:

c+o2=co2

Explanation:

balanced reaction it is correct

Answer:

C + O2 → CO2

Explanation:

i took the test and got it right

Answer:

The metal buckle conducts heat away from the hand than both the steering wheel and center console.

Explanation:

Good conductors are materials that allow both heat and electricity to flow easily through them. Examples of good conductors are metals.

Poor conductors or insulators are materials which do not allow both heat and electricity to flow easily through them. Examples of insulators are most non-metals, plastics, rubber, wool, wood, etc.

On a cool day a metallic object like the buckle of a car's seatbelt will easily conduct heat away from the hand than other materials inside the car like the seat, the seatbelt, the steering wheel and the centre console as these materials are made from insulators or poor conductors.

Therefore, the metal buckle will feel colder to touch than other things in the car because it conducts heat away from the hand than both the steering wheel and center console.

Answer:

38

Explanation:

Answer:

the answer to your question is: true

Thermal energy has been the total amount of energy that has been present in the object. The thermal energy has been directly proportional to the size of the object. Thus, the statement is true, and option a is correct

Thermal energy is defined as the energy possessed by the particles of the molecules and atoms that follows the kinetic molecule theory and moves faster and collides with each other when the temperature of the system has been increased.

This type of energy has been known to be passed by the object having to be in the vicinity of the temperature. Thermal energy can flow from one substance to another due to differences in temperature.

Thermal energy has been possessed by fossil fuels like coals, and natural gases, along with electric heat,m solar heat, and geothermal heat. The thermal energy has been directly proportional to the surface area and bigger objects having more surface will be able to hold more energy.

Therefore, the statement about thermal energy and surface area is true.

Learn more about thermal energy, here:

https://brainly.com/question/14506133

#SPJ6

Answer:

Ca

Explanation:

It is on the left side of the periodic table where metals are located.

Answer:

Ca

Explanation:

Answer:

64.71C

Explanation:

Given

Mass (m) = 5g

Initial Temperature (T1) = 25C

Heat (Q) = 832 joules

Required

Determine the final temperature

This question will be solved using:

Q = mc∆T

Where c = specific heat = 4.19

Substitute values in the above formula, we have:

832 = 5 * 4.19 * (T2 - 25)

832 = 20.95 * (T2 - 25)

Divide both sides by 20.95

39.71 = T2 - 25

Add 25 to both sides

39.71 + 25 = T2

T2 = 64.71C

Explanation:

H is 1 mole of hydrogen

2H is 2 moles of hydrogen

Answer:

Data

Explanation:

You are right

Answer:

2.85g/cm^3

Explanation:

density = mass/volume

density=8.76g/3.07cm^3= 2.85g/cm^3

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

From the question we have

[tex]density = \frac{8.76}{3.07} \\ = 2.85342019...[/tex]

We have the final answer as

Hope this helps you

Explanation:

The 5s,5p and 5d orbitals hybridise to form seven sp3 d3 hybrid orbitals. The molecule is then formed with 7 fluorine atoms. The geometry of this molecule is pentagonal bipyramidal . Five F atoms are in one plane directed at corners of a pentagon (equatorial position), with 72º angle between them.

please Mark as brainliest and follow

Answer:

bent and trigonal planar

Explanation:

Answer:

Option C. 2OH¯ + Ca²⁺ —> Ca(OH)2

Explanation:

OH¯ + Ca²⁺ —> Ca(OH)2

The above equation can be balance as follow:

OH¯ + Ca²⁺ —> Ca(OH)2

There are 2 atoms of OH on the right side and 1 atom on the left side. It can be balance by putting 2 in front of OH¯ as shown below:

2OH¯ + Ca²⁺ —> Ca(OH)2

Next, we shall balanced the charge on both side. This can be obtained as follow:

Total charge on the left side = –2 + 2

Total charge on the left side = 0

Total charge on the right side = 0

Thus, the charge on both side are equal. Hence, the balance ionic equation is:

2OH¯ + Ca²⁺ —> Ca(OH)2

you are given the mass of an element, you use the periodic table to find its molar mass, and multiply the given mass by the reciprocal of the molar mass. This is Mass → Moles . Once you have moles, multiply by Avogadro's number to calculate the number of atoms. This is Moles → Atoms