The original charge on each sphere was 1.2 x [tex]10^{-8}[/tex] C.Using Coulomb's Law, we can find the initial charge on each sphere:
Where F is the force between the spheres, k is Coulomb's constant (9 x 10^9 N m^2/C^2), q1 and q2 are the charges on the spheres, and r is the distance between the spheres.
[tex]F = k * (q1 * q2) / r^2[/tex]
From the problem, we have:
F1 = 0.050 N, r1 = 0.25 m, and F2 = 0.060 N.
Setting these values equal to Coulomb's Law, we get two equations:
[tex]0.050 N = k * (q^2) / (0.25 m)^2[/tex]
[tex]0.060 N = k * (q^2) / r^2[/tex]
Dividing the second equation by the first, we get:
[tex]0.060 N / 0.050 N = r^2 / (0.25 m)^2[/tex]
Simplifying:
r = 0.29 m
Substituting this value of r into either of the original equations and solving for q, we get:
[tex]q = sqrt((F * r^2) / k)[/tex]
[tex]q = sqrt((0.050 N * (0.25 m)^2) / (9 x 10^9 N m^2/C^2))[/tex]
q= 1.2 x [tex]10^{-8}[/tex] C
Learn more about Coulomb's Law here:
https://brainly.com/question/506926
#SPJ11
inside a motor, 29.6 A passes through a 270 turn circular loop that is 9.8 cm in radius. What is the magnetic field strength created at its center
The magnetic field strength created at the center of the motor is 0.4306T.
To find the magnetic field strength created at the center of a circular loop, we can use the formula for the magnetic field strength of a current-carrying loop:
B = (μ₀ × I × N) / (2 × R)
where B is the magnetic field strength, μ₀ is the permeability of free space (4π × 10^(-7) Tm/A), I is the current (29.6 A), N is the number of turns (270), and R is the radius of the loop (0.098 m, since 9.8 cm = 0.098 m).
Now, let's plug in the values:
B = (4π × 10^(-7) Tm/A × 29.6 A × 270) / (2 × 0.098 m)
B = (3.711 × 10^(-6) T × 29.6 A × 270) / (0.196 m)
B = (3.0997 × 10^(-4) T × 270) / (0.196 m)
B = 0.084369 T / 0.196 m
B ≈ 0.4306 T
Therefore, the magnetic field strength created at the center of the loop is approximately 0.4306 T (Tesla).
To know more about magnetic, visit:
https://brainly.com/question/3160109
#SPJ11
a weight suspended from an ideal spring oscillates up and down with a period t if the amplitude of the oscillation is doubled the period will be
If the amplitude of the oscillation of a weight suspended from an ideal spring is doubled, the period of oscillation will remain unchanged.
The period of oscillation is solely dependent on the mass of the weight and the stiffness of the spring. Therefore, even if the amplitude of the oscillation is changed, the weight will still oscillate at the same frequency and period as before.
When a weight is suspended from an ideal spring and oscillates up and down, the period (t) is determined by the mass of the weight and the spring constant, not the amplitude of the oscillation. Therefore, if the amplitude of the oscillation is doubled, the period will remain the same (t).
To learn more about amplitude. Click this!
brainly.in/question/15279543
#SPJ11
When car tires are on hot pavement for too long, the pressure inside will ___________ and the volume within the tire will _____________.
When car tires are on hot pavement for too long, the pressure inside will increase and the volume within the tire will also increase. This happens because the heat causes the air molecules inside the tire to move faster and collide more frequently, increasing their pressure.
Additionally, the rubber of the tire expands slightly as it heats up, which can also increase the volume of air within the tire. It's important to regularly check tire pressure, especially during hot weather, to ensure safe driving conditions and avoid potential blowouts.
So, when car tires are on hot pavement for too long, the pressure inside will increase and the volume within the tire will also increase due to the heat causing the air molecules inside the tire to move faster and expand, leading to a rise in both pressure and volume.
To know more about pressure, refer
https://brainly.com/question/28012687
#SPJ11
it takes 20ms to magnetize the inductor and the inductor has a value of 20H, what is the value of the resistor
It takes 20ms to magnetize the inductor and the inductor has a value of 20H, the value of the resistor is 1000 ohms.
To find the value of the resistor when it takes 20ms to magnetize the inductor with a value of 20H, you can use the time constant formula:
τ = L/R
Where τ is the time constant (in seconds), L is the inductance of the inductor (in henries), and R is the resistance of the resistor (in ohms).
Step 1: Convert the given time into seconds.
20ms = 0.020 seconds
Step 2: Plug in the given values into the time constant formula.
0.020 = 20H / R
Step 3: Solve for R.
R = 20H / 0.020
Step 4: Calculate the value of R.
R = 1000 ohms
So, the value of the resistor is 1000 ohms.
To learn more about inductor refer here:
https://brainly.com/question/15893850#
#SPJ11
When climbing or descending through an area of possible wind shear, the pilot should be aware of A. a fast rate of climb and a slow rate of descent. B. a rapid change of airspeed. C. airframe icing.
When climbing or descending through an area of possible wind shear, the pilot should be aware of B. a rapid change of airspeed.
Wind shear is a sudden change in wind speed and/or direction over a short distance, which can significantly impact an aircraft's performance. This phenomenon can occur at any altitude but is particularly concerning during takeoff and landing, as it may cause a sudden loss or gain of airspeed, making it difficult for the pilot to maintain control.
During a climb or descent in wind shear conditions, a fast rate of climb or slow rate of descent (A) may not be the primary concern, as airspeed is the most critical factor in maintaining aircraft stability. A rapid change of airspeed (B) is a more significant issue because it can result in a loss of lift and an increased risk of stalling, leading to potentially dangerous situations.
Airframe icing (C) can also be a concern for pilots, but it is not directly related to wind shear. Icing occurs when supercooled water droplets freeze upon contact with the aircraft's surfaces, causing a buildup of ice that may disrupt the airflow and decrease lift. However, icing and wind shear are distinct phenomena that require different considerations and strategies from pilots to ensure safe flight operations.
Therefore, the correct answer is Option B.
Learn more about Wind shear here: https://brainly.com/question/29487744
#SPJ11
The resistance of a very fine aluminum wire with a 19 μm × 19 μm square cross section is 1200 Ω . A 1200 Ω resistor is made by wrapping this wire in a spiral around a 2.3-mm-diameter glass core.
How many turns of wire are needed?
The first step to solving this problem is to find the length of the wire needed to make a 1200 Ω resistor. We can use the formula for the resistance of a wire, which is:
R = ρ * L / A
where R is the resistance, ρ is the resistivity of the material (which is 2.65 × 10^-8 Ω*m for aluminum), L is the length of the wire, and A is the cross-sectional area of the wire.
We know the resistance (1200 Ω) and the cross-sectional area (19 μm x 19 μm = 361 μm^2 = 3.61 × 10^-10 m^2), so we can rearrange the formula to solve for the length of the wire:
L = R * A / ρ
L = 1200 Ω * 3.61 × 10^-10 m^2 / (2.65 × 10^-8 Ω*m)
L = 1.63 m
Now we need to find the number of turns of wire needed to wrap around the 2.3-mm-diameter glass core. We can use the formula for the length of a wire wrapped in a spiral:
Lspiral = π * (d + D) * n / 2
where Lspiral is the length of the wire in the spiral, d is the diameter of the wire, D is the diameter of the core, and n is the number of turns.
We know the length of the wire (1.63 m), the diameter of the core (2.3 mm = 0.0023 m), and the diameter of the wire (19 μm = 0.000019 m), so we can rearrange the formula to solve for the number of turns:
n = 2 * Lspiral / π * (d + D)
n = 2 * 1.63 m / π * (0.000019 m + 0.0023 m)
n = 3034 turns
Therefore, we need 3034 turns of the fine aluminum wire to make a 1200 Ω resistor by wrapping the wire in a spiral around a 2.3-mm-diameter glass core.
Learn more about aluminum here:
https://brainly.com/question/9496279
#SPJ11
A simple pendulum consists of a small ball tied to a string and set in oscillation. As the pendulum swings the tension in the string is:
As the pendulum swings upward again, the tension in the string or rod decreases, eventually reaching a minimum at the highest point of the swing, where the ball is momentarily stationary again.
A pendulum is a simple device consisting of a weight suspended from a pivot point so that it can swing back and forth freely. The motion of the pendulum is a classic example of harmonic motion, where the weight oscillates back and forth with a constant period and amplitude.
Pendulums have a variety of uses, ranging from timekeeping in clocks to measuring the acceleration due to gravity. They are often used as a component in scientific experiments to study the principles of harmonic motion and oscillation. The period of a pendulum is determined by its length and the acceleration due to gravity. This relationship was first discovered by Galileo Galilei in the 16th century and is now known as the law of isochronism.
To learn more about Pendulum visit here:
brainly.com/question/29702798
#SPJ4
A typical American family uses 1000 kWhkWh of electricity a month. Part A Part complete What is the average current in the 120 VV power line to the house
The average current in the 120 V power line to the house is 11.6 amps.
To find the average current in the 120 V power line to the house, we need to use the equation:
Power (P) = Voltage (V) x Current (I)
Rearranging the equation, we can solve for the current:
Current (I) = Power (P) / Voltage (V)
First, we need to convert the monthly energy usage from kilowatt-hours (kWh) to watt-hours (Wh):
1000 kWh x 1000 Wh/kWh = 1,000,000 Wh
Next, we need to find the average power usage per hour:
1,000,000 Wh / 720 hours per month = 1388.9 W
Using the above equation, we can now find the average current in the 120 V power line:
I = P/V = 1388.9 W / 120 V = 11.6 A
Know more about average current here:
https://brainly.com/question/13201381
#SPJ11
When the distance between two stars decreases by one-third, the force between them increases to twice as much. decreases by one-third. increases to nine times as much. decreases by one-half. none of the above
When the distance between two stars decreases by one-third, the force between them increases to nine times as much.
According to Newton's Law of Universal Gravitation, the force between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. When the distance between two stars decreases by one-third, the new distance is two-thirds of the original distance. Since the force is inversely proportional to the square of the distance, the new force is proportional to the inverse of (2/3)^2, which is 9/4. Therefore, the force increases to nine times as much.
Decreasing the distance between two stars by one-third leads to a nine-fold increase in the gravitational force between them.
To know more about gravitational force, click here
https://brainly.com/question/12528243
#SPJ11
If no MCA is specified, what is the lowest altitude for crossing a radio fix, beyond which a higher minimum applies?
If no Minimum Crossing Altitude (MCA) is specified on a chart, the lowest altitude for crossing a radio fix would be the Minimum En Route Altitude (MEA). The MEA is the lowest altitude at which adequate navigation signal reception and obstacle clearance can be assured along an airway or a route segment. However, if the MEA is not high enough to provide obstacle clearance or communication signal reception, a higher minimum applies.
The next highest minimum altitude would be the Minimum Obstacle Clearance Altitude (MOCA), which provides at least 1,000 feet of obstacle clearance in non-mountainous terrain, or 2,000 feet of obstacle clearance in designated mountainous terrain areas. The MOCA also assures adequate navigation signal reception, but may not provide reliable communication signal reception.
If neither MCA nor MOCA are specified, the pilot must comply with the MEA for that particular segment. However, if the MEA is not high enough to provide obstacle clearance or communication signal reception, it is the pilot's responsibility to fly at a higher altitude that provides adequate clearance and signal reception.
In summary, the lowest altitude for crossing a radio fix, beyond which a higher minimum applies, is the MEA if no MCA is specified. If the MEA is not high enough to provide obstacle clearance or communication signal reception, the MOCA must be used. If neither MCA nor MOCA are specified, the pilot must comply with the MEA, but it is their responsibility to ensure adequate clearance and signal reception.
for more such questions on altitude
https://brainly.com/question/28308143
#SPJ11
The greater the friction at the surface, the _____ the wind speed for a given pressure gradient force, and the ______ the angle the wind crosses isobars on a map.
The greater the friction at the surface, the slower the wind speed for a given pressure gradient force, and the more the angle the wind crosses isobars on a map.
The gradient force is a type of force that arises due to the variation of a field's strength over a distance. This force is also known as the "force of change" and is commonly observed in electromagnetism and fluid dynamics. In electromagnetism, the gradient force acts on electrically charged particles within a non-uniform electric field.
The force causes the particles to move towards regions of higher field strength, where the electric field gradient is steeper. In fluid dynamics, the gradient force is caused by variations in fluid pressure and is responsible for the movement of fluids from high-pressure regions to low-pressure regions. This force plays an important role in many natural phenomena, including atmospheric and oceanic circulation.
To learn more about Gradient force visit here:
brainly.com/question/31060281
#SPJ4
Consider a dataset is normally distributed with a standard deviation of 3. Suppose the test scores from a sample size of 75 students in a class has a sample mean of 68.
How many degrees of freedom we use to find the t-critical statistic value?
[ Select ]
What is Maximal Margin of Error (E) at 90% confidence?
[ Select ]
Construct a 90% confidence interval
Therefore, the 90% confidence interval for the population mean is [67.310, 68.690]. Therefore, we use 74 degrees of freedom to find the t-critical statistic value.
To find the t-critical statistic value, we need to know the degrees of freedom, which is given by:
df = n - 1
where n is the sample size. In this case, the sample size is 75, so the degrees of freedom is:
df = 75 - 1 = 74
Therefore, we use 74 degrees of freedom to find the t-critical statistic value.
The maximal margin of error (E) at 90% confidence is given by:
E = t * (s / √(n))
where t is the t-critical value, s is the standard deviation, and n is the sample size. We want a 90% confidence interval, so the level of significance (alpha) is 0.1, which means that the area in the tails of the t-distribution is 0.05. Since we have 74 degrees of freedom, we can find the t-critical value using a t-distribution table or calculator. For a two-tailed test at alpha = 0.1 and 74 degrees of freedom, the t-critical value is approximately 1.991.
Substituting the given values, we get:
E = 1.991 * (3 / √(75))
E = 1.991 * 0.3467
E ≈ 0.690
Therefore, the maximal margin of error (E) at 90% confidence is approximately 0.690.
To construct a 90% confidence interval for the population mean (mu), we can use the formula:
CI = X ± E
where X is the sample mean and E is the maximal margin of error. Substituting the given values, we get:
CI = 68 ± 0.690
CI = [67.310, 68.690]
To know more about degrees of freedom,
https://brainly.com/question/29593681
#SPJ11
Crew members attempt to escape from a damaged submarine 118 m below the surface.What force must be applied to a pop-out hatch, which is 1.70 m by 0.852 m, to push it out at that depth
To determine the force needed to push out the pop-out hatch at a depth of 118 m below the surface, we need to consider the pressure exerted by the water on the hatch. At this depth, the water pressure is approximately 11.6 MPa (megapascals), which is equivalent to 11600 kPa (kilopascals) or 1.16 x 10^8 Pa (pascals).
To calculate the force needed to push out the hatch, we can use the formula:
Force = Pressure x Area
where Pressure is the water pressure at 118 m depth (1.16 x 10^8 Pa) and Area is the surface area of the hatch (1.70 m x 0.852 m = 1.4484 m^2).
Substituting these values into the formula, we get:
Force = 1.16 x 10^8 Pa x 1.4484 m^2
Force = 1.677 x 10^8 N
Therefore, the force needed to push out the pop-out hatch from a damaged submarine at a depth of 118 m below the surface is approximately 167.7 million Newtons.
To know more about approximately visit:-
https://brainly.com/question/31646509
#SPJ11
An alien spaceship is racing towards the Earth at a speed of 500 km/s. It shines a laser beam at the Earth, which we observe at a wavelength of 500 nm. What is the rest wavelength of the light emitted by the laser
The rest wavelength of the light emitted by the laser is 498.997 nm.
According to the relativistic Doppler effect, the observed wavelength of light from a moving source is given by:
λ_obs = λ_rest * sqrt((1 + v/c) / (1 - v/c))
where λ_rest is the rest wavelength of the light, v is the velocity of the source relative to the observer, and c is the speed of light.
Plugging in the given values, we get:
λ_obs = 500 nm
v = 500 km/s = 1.67 x 10^8 m/s
c = 3.00 x 10^8 m/s
Solving for λ_rest, we get:
λ_rest = λ_obs / sqrt((1 + v/c) / (1 - v/c))
= 500 nm / sqrt((1 + 1.67 x 10^8 m/s / 3.00 x 10^8 m/s) / (1 - 1.67 x 10^8 m/s / 3.00 x 10^8 m/s))
= 498.997 nm (rounded to three significant figures)
Therefore, the rest wavelength of the light emitted by the laser is 498.997 nm.
To know more about doppler effect, click here:-
https://brainly.com/question/15318474
#SPJ11
If the vertical distance between your eyes and the beetle is 25 cm , how far away (in meters) should you stand in order to see the green light
To calculate the distance you need to stand from the green light, we need more information about the situation. However, assuming that the green light is located at the same height as your eyes and directly in front of you, we can use basic trigonometry. If the vertical distance between your eyes and the beetle is 25 cm, we can use this as one side of a right triangle. Let's say the other side is the distance between you and the green light, which we'll call x.
Using the Pythagorean theorem, we get:
x^2 + 25^2 = d^2
where d is the distance between you and the green light in meters.
Simplifying, we get:
x^2 + 625 = d^2
To solve for d, we also need to know the value of x. Without this information, we cannot give a precise answer. However, we do know that the distance between you and the green light must be greater than or equal to 25 cm, since that is the vertical distance between your eyes and the beetle.
In conclusion, to see the green light from a distance of 25 cm vertical distance, we need more information about the situation to calculate the required distance in meters.
we need to find the distance at which the green light from the beetle becomes visible given the vertical distance between your eyes and the beetle.
1. First, we need to convert the vertical distance from centimeters to meters: 25 cm = 0.25 meters.
2. Next, we need to consider the angle of visibility for the green light. Typically, the angle of visibility for human eyes is around 0.1 degrees for clear vision.
3. Using the tangent function in trigonometry, we can calculate the distance required for the green light to be visible:
tan(angle) = vertical distance / distance to stand
4. Plug in the values: tan(0.1 degrees) = 0.25 meters / distance to stand
5. Solve for the distance to stand: distance to stand = 0.25 meters / tan(0.1 degrees)
After calculating, you should stand approximately 143.24 meters away from the beetle to see the green light, considering the vertical distance of 0.25 meters.
For more information on trigonometry visit:
brainly.com/question/11371684
#SPJ11
We wish to design a supersonic wind tunnel that produces a Mach 2.8 flow at standard sea level conditions in the test section and has a mass flow of air equal to 1 slug/s. Calculate the necessary reservoir pressure and temperature, the nozzle throat and exit areas, and the diffuser throat area.
The necessary reservoir pressure and temperature equation are P2 = P1 * (1 + γ-1/2 * (M1² - 1)) raised to (γ / γ-1) and T2 = T1 * (1 + γ-1/2 * (M1² - 1)). The nozzle throat and exit areas equation are A1 = A2 / (1 / M1) * ((2 + (γ-1) * M1²) / (γ+1)) raised to (γ+1 / 2*(γ-1)). The diffuser throat area equation is a1 = sqrt(γ * R * T1) = sqrt(1.4 * 287 J/kg-K * 288.15 K).
To design a supersonic wind tunnel that produces a Mach 2.8 flow at standard sea level conditions, we need to use the following equations:
Continuity equation: ρ1 * A1 * V1 = ρ2 * A2 * V2
Mach number equation: M = V1 / a1
Isentropic relations: P2 / P1 = (1 + γ-1/2 * (M1^2 - 1)) to the power (γ / γ-1) and T2 / T1 = (1 + γ-1/2 * (M1² - 1))
Area-Mach number relation: A2 / A1 = (1 / M1) * ((2 + (γ-1) * M1²) / (γ+1)) to the power (γ+1 / 2*(γ-1))
where ρ is density, A is cross-sectional area, V is velocity, P is pressure, T is temperature, M is Mach number, γ is the ratio of specific heats, and the subscripts 1 and 2 represent the conditions at the reservoir and test section, respectively.
Given:
Mach number (M) = 2.8
Mass flow rate (mdot) = 1 slug/s
Standard sea level conditions (P1 = 101325 Pa, T1 = 288.15 K, ρ1 = 1.225 kg/m³)
Ratio of specific heats (γ) = 1.4
To determine the necessary reservoir pressure and temperature, we can use the Mach number equation and the speed of sound equation:
a1 = sqrt(γ * R * T1)
where R is the specific gas constant for air (287 J/kg-K).
Solving for V1, we get:
V1 = M * a1 = 2.8 * sqrt(γ * R * T1)
Using the continuity equation and mass flow rate, we can solve for the cross-sectional area at the test section:
A2 = mdot / (ρ2 * V2) = mdot / (ρ1 * V1)
To determine the pressure and temperature at the test section, we can use the isentropic relations:
P2 / P1 = (1 + γ-1/2 * (M1² - 1)) to the power (γ / γ-1)
T2 / T1 = (1 + γ-1/2 * (M1² - 1))
We can solve for P2 and T2 by rearranging the equations:
P2 = P1 * (1 + γ-1/2 * (M1² - 1)) to the power (γ / γ-1)
T2 = T1 * (1 + γ-1/2 * (M1² - 1))
We can use the area-Mach number relation to determine the nozzle throat and exit areas:
A1 = A2 / (1 / M1) * ((2 + (γ-1) * M1²) / (γ+1)) to the power (γ+1 / 2*(γ-1))
where M1 is the Mach number at the nozzle throat.
To determine the diffuser throat area, we can use the continuity equation and the ratio of the diffuser exit area to throat area:
A4 / A3 = 2
where A4 is the diffuser exit area and A3 is the diffuser throat area.
Solving for the necessary values:
a1 = sqrt(γ * R * T1) = sqrt(1.4 * 287 J/kg-K * 288.15 K)
Know more about diffuser here:
https://brainly.com/question/15108685
#SPJ11
Two satellites with equal rest masses are traveling toward each other in deep space. One is traveling at 0.550c and the other at 0.750c. The satellites collide and stick together. What is the speed of the combined object after the collision
The speed of the combined object after the collision is 0.307 times the speed of light.
To solve this problem, we need to use the conservation of momentum and energy. Since the two satellites have equal rest masses, we can assume that they have equal masses after the collision.
Using the formula for relativistic momentum, p = mv/√(1 - [tex]v^{2}[/tex]/[tex]c^{2}[/tex]), we can calculate the momentum of each satellite before the collision:
p1 = m(0.550c)/√(1 - [tex]0.550^{2}[/tex]/[tex]c^{2}[/tex])
p2 = m(0.750c)/√(1 - [tex]0.750^{2}[/tex]/[tex]c^{2}[/tex])
where m is the mass of each satellite.
The total momentum before the collision is the sum of these two momenta:
p_total = p1 + p2
After the collision, the two satellites stick together, so the mass of the combined object is 2m. Using the same formula for momentum, we can calculate the momentum of the combined object after the collision:
p_combined = (2m)v/√(1 - [tex]v^{2}[/tex]/[tex]c^{2}[/tex])
where v is the velocity of the combined object.
Since momentum is conserved, we can set p_total equal to p_combined:
p1 + p2 = (2m)v/√(1 - [tex]v^{2}[/tex]/[tex]c^{2}[/tex])
Solving for v, we get:
v = (p1 + p2)/(2m) * √(1 - [tex]v^{2}[/tex]/[tex]c^{2}[/tex])
We can plug in the values for p1, p2, and m, and solve for v using trial and error or a numerical method. The result is:
v = 0.307c
Therefore, the speed of the combined object after the collision is 0.307 times the speed of light.
Know more about satellites here:
https://brainly.com/question/30366649
#SPJ11
A 2.60-cmcm-diameter parallel-plate capacitor with a spacing of 0.400 mmmm is charged to 300 VV. Part A What is the total energy stored in the electric field
Using the given information, we can calculate the total energy stored in the electric field of the parallel-plate capacitor.
The capacitor has a diameter of 2.60 cm (0.026 m) and a spacing of 0.400 mm (0.0004 m). It is charged to 300 V. First, we need to find the capacitance (C) using the formula C = ε₀ * A / d, where ε₀ is the vacuum permittivity (8.85 × 10⁻¹² F/m), A is the area of the plates, and d is the spacing between the plates.
The area A = π * (diameter / 2)² = π * (0.026 / 2)² = 5.31 × 10⁻⁴ m².
Now, we can find the capacitance: C = (8.85 × 10⁻¹² F/m) * (5.31 × 10⁻⁴ m²) / (0.0004 m) = 1.17 × 10⁻¹¹ F.
Next, we'll find the energy stored (U) using the formula U = 0.5 * C * V², where V is the voltage.
U = 0.5 * (1.17 × 10⁻¹¹ F) * (300 V)² = 5.27 × 10⁻⁶ J.
So, the total energy stored in the electric field of the parallel-plate capacitor is 5.27 × 10⁻⁶ J (joules).
To learn more about energy visit;
https://brainly.com/question/24284560
#SPJ11
light at 543 nm from a helium–neon laser shines on a pair of parallel slits separated by 1.57 ✕ 10−5 m and an interference pattern is observed on a screen 1.70 m from the plane of the slits.1. find angle from central maximum to first bright fringe
2. at what angle from central maximum does the second dark fringe appear?
3. find the distance (in m) from the central maximum to the first bright fringe.
We can use the formula for the angle of the nth bright fringe. θn = nλ/where θn is the angle from the central maximum to the nth bright fringe, λ is the wavelength of the laser light (543 nm = 5.43 x 10^-7 m), and d is the distance between the two slits (1.57 x 10^-5 m).
To find the angle from the central maximum to the first bright fringe, we can plug in n = 1:θ1 = (1) (5.43 x 10^-7 m) / (1.57 x 10^-5 m) = 0.0187 radians. To find the angle from the central maximum to the second dark fringe, we can use the formula for the angle of the nth dark fringe: θn = (2n - 1)λ/2dWhere n is the number of the dark fringe we're looking for (in this case, n = 2).θ2 = (2(2) - 1) (5.43 x 10^-7 m) / (2(1.57 x 10^-5 m)) = 0.0562 radians. To find the distance from the central maximum to the first bright fringe, we can use the formula for the distance between adjacent bright fringes: y = Ltanθny1 = (1.70 m) tan (0.0187 radians) = 0.056 most, the distance from the central maximum to the first bright fringe is 0.056 meters (or 5.6 cm).In summary, the angle from the central maximum to the first bright fringe is 0.0187 radians, the angle from the central maximum to the second dark fringe is 0.0562 radians, and the distance from the central maximum to the first bright fringe is 0.056 meters.
learn more about fringe here.
https://brainly.com/question/20324380
#SPJ11
What type of energy transfer occurs in the atmosphere due to moving air molecules (wind) bumping into objects and so moving vertically in the atmosphere
The type of energy transfer that occurs in the atmosphere due to moving air molecules (wind) bumping into objects and moving vertically in the atmosphere is kinetic energy transfer. Kinetic energy is the energy of motion and is transferred from one object to another when they collide.
In the case of wind, the air molecules have kinetic energy due to their motion. As they collide with objects such as trees, buildings, or mountains, some of this kinetic energy is transferred to the objects, causing them to move. When the air molecules move vertically in the atmosphere, they can transfer kinetic energy to the air molecules above or below them, causing them to move as well.
This transfer of kinetic energy from the air molecules to objects or other air molecules is the reason for the movement and turbulence observed in the atmosphere. It is also the basis for many atmospheric phenomena such as thunderstorms, hurricanes, and tornadoes, where the transfer of kinetic energy between the air molecules can lead to the formation of intense vortices and turbulent flows.
for more such questions on Kinetic energy
https://brainly.com/question/8101588
#SPJ11
The noise made by the crowd in a stadium has an intensity of 3.50 W/m2. What is the sound intensity level?
The sound intensity level of a stadium crowd with an intensity of 3.50 W/m2 is 73.5 dB.
The sound intensity level (SIL) is a measure of the intensity of sound waves in decibels (dB).
To calculate the SIL, you can use the equation SIL = 10log(I/Io), where I is the intensity of the sound wave and Io is the reference intensity, which is 1 x[tex]10^-^1^2[/tex] W/m2.
Using the given intensity of 3.50 W/m2, we can calculate the SIL as SIL = 10log(3.50/1 x [tex]10^-^1^2[/tex]) = 73.5 dB.
This means that the sound made by the crowd in the stadium has a SIL of 73.5 dB, which is equivalent to the noise level of a vacuum cleaner or busy street traffic.
For more such questions on intensity, click on:
https://brainly.com/question/14252912
#SPJ11
A negatively-charged rod is brought close to (but does not touch) two neutral spheres that are in contact with each other but insulated from the ground. While keeping the rod in the same position, if the two spheres are then separated, what kind of charge will be on the spheres
When the negatively charged rod is brought close to the neutral spheres in contact with each other, the electrons in the spheres will be repelled by the negative charge of the rod and move away from it.
In physics, the charge is a fundamental property of matter that describes how strongly an object interacts with electric fields. Objects can have a positive, negative, or neutral charge, depending on whether they have an excess of positive or negative particles or an equal number of both.
A charge is measured in units of coulombs, and its behavior is described by Coulomb's law, which states that the force between two charged objects is proportional to the product of their charges and inversely proportional to the square of the distance between them. One important property of charge is that it is conserved, meaning that the total amount of charge in a closed system remains constant.
To learn more about Charge visit here:
brainly.com/question/11944606
#SPJ4
Light travelling in air is incident on the surface of a block of plastic at the angle of 62.7 to the normal and is bent so that it makes 48.1 angle with normal in the plastic. Find the speed of light in the plastic.
Answer:
Snell's law is the relation that describes the relationship between the angles of incidence and refraction, with respect to light waves passing through a boundary, such as air and plastic. The law states that the ratio of the sines of the angles of incidence and of refraction is a constant :
n1 sin(t1) = n2 sin(t2)
where n1 and n2 are the refractive indices.
The refractive index is one measure of the speed of light in a material, being defined as the ratio of the speed of light in vacuum relative to that in the considered medium. In your question, the speed of light in air is approcimately that in vacuum, thus n1 = c / c = 1, where c is the speed of light. n2 = c / v, where v is the speed of light in the plastic.
Substituting into Snell's law,
1 sin(72.7) = c / v sin(57.1)
v = c sin(57.1) / sin(72.7)
v = 0.88 c, or 88% the speed of light.
Explanation:
The speed of light in the plastic block is approximately 198,744,167 m/s.
We can use Snell's Law, which relates the angles of incidence and refraction to the refractive indices of the two media involved.
Step 1: Write down Snell's Law: n1 * sin(θ1) = n2 * sin(θ2)
Step 2: We know that the refractive index of air (n1) is approximately 1, and the angle of incidence (θ1) is 62.7°. The angle of refraction in the plastic (θ2) is 48.1°.
Step 3: Plug in the values: 1 * sin(62.7°) = n2 * sin(48.1°)
Step 4: Solve for n2 (refractive index of the plastic): n2 = sin(62.7°) / sin(48.1°)
Step 5: Calculate the speed of light in the plastic: v = c / n2, where c is the speed of light in a vacuum (3.0 x 10^8 m/s).
Using these steps, you can find the speed of light in the plastic block. Therefore, the speed of light in the plastic block is approximately 198,744,167 m/s.
To know more about light visit
https://brainly.com/question/15200315
#SPJ11
Please help me!!! I need to finish this class to graduate and the end of the year is soon.
Review the seven questions. Write a few sentences summarizing what you already know about these topics.
Chemical Reactions of Fossil Fuels
What kind of chemical reaction occurs when fossil fuels and biomass are burned? What is produced in addition to energy?
What is acid rain? Which fossil fuel causes acid rain? What are the chemical reactions that produce the acid?
Difference Between Biomass and Fossil Fuels
In terms of environmental impact, what’s the difference between natural gas, coal, and biomass? Consider both carbon dioxide (CO2) emissions and acid rain.
What’s the difference between nonrenewable and renewable energy sources? Is biomass a renewable energy source?
What’s a new discovery that makes it easier to use biomass as an energy source?
Comparing Biomass with Other Renewable Energy Sources
What are the pros and cons of several renewable energy sources? Renewable energy sources include biomass, wind power, hydropower, solar power, and geothermal power.
Making Recommendations for Energy Choices
Which renewable energy sources should be developed in your area, and why? Consider abundance of the energy source, ease of setup in your area, and cost.
When burning fossil fuels and biomass, they spark a combustive reaction; meaning the fuel transpires with oxygen existing in the atmosphere to generate energy such as heat, sight, and sound.
How to explain the informationNonrenewable power sources are those that do not replenish, comprising coal, oil, as well as natural gas.
What lends itself to easier use of biomass for energy purposes is the emergence of more efficient and cost-effective approaches for transforming it into biofuels.
The optimal renewable power sources to implement in a location depend on certain specifics, including the amount of this energy source, its capacity for setup, and price.
Learn more about biomass on
https://brainly.com/question/82777
#SPJ1
A(n) is a regular arrangement of places where wave effects are increased, decreased, or neutralized.
A wave interference pattern is a regular arrangement of places where wave effects are increased, decreased, or neutralized.
The answer to your question is "interference pattern." An interference pattern is a regular arrangement of places where wave effects are increased, decreased, or neutralized. This occurs when two or more waves interact with each other, resulting in constructive or destructive interference. Constructive interference is when waves combine to increase the amplitude, or height, of the resulting wave. Destructive interference is when waves combine to decrease the amplitude of the resulting wave, resulting in a cancelation of the wave. Neutralization occurs when waves of equal amplitude and opposite phase cancel each other out completely, resulting in no wave.
To learn more about wave interference. Click this!
brainly.in/question/22186924
#SPJ11
A 200-m radio telescope is used to investigate sources emitting a 21-cm wavelength. The minimum angular separation resolvable for this system is
Minimum angular separation: 0.06 degrees for 21-cm wavelength, 200-m telescope.
The minimum angular separation resolvable by a radio telescope can be determined using the formula:
θ = λ / D,
where θ is the angular separation, λ is the wavelength of the radiation, and D is the diameter of the telescope.
In this case, the wavelength (λ) is given as 21 cm, and the diameter of the telescope (D) is 200 m.
Converting the wavelength to meters:
λ = 21 cm = 0.21 m.
Substituting the values into the formula:
θ = 0.21 m / 200 m.
Calculating the result:
θ = 0.00105 radians.
To express the result in degrees, you can convert radians to degrees using the conversion factor: 1 radian = 57.3 degrees.
θ = 0.00105 radians [tex]*[/tex] 57.3 degrees/radian.
θ ≈ 0.06 degrees.
Therefore, the minimum angular separation resolvable by the 200-m radio telescope for sources emitting a 21-cm wavelength is approximately 0.06 degrees.
For more such questions on wavelength, click on:
https://brainly.com/question/10728818
#SPJ11
A football player kicks a ball with an initial velocity of 25 m/s at an angle of 53 degrees above the horizontal. The vertical component of the initial velocity of the ball is
Answer:We can use trigonometry to find the vertical component of the initial velocity of the ball. The vertical component of the initial velocity is given by:
vertical component = initial velocity x sin(angle)
Plugging in the values given in the problem, we get:
vertical component = 25 m/s x sin(53 degrees)
vertical component = 25 m/s x 0.800
vertical component = 20 m/s
Therefore, the vertical component of the initial velocity of the ball is 20 m/s.
Explanation:
47 . Two planets are on a collision course, heading directly toward each other at 0.250c. A spaceship sent from one planet approaches the second at 0.750c as seen by the second planet. What is the velocity of the ship relative to the first planet
The velocity of the spaceship relative to the first planet is -0.8824c, which means it is moving away from the first planet at 0.8824 times the speed of light.
v = (v₁ + v₂) / (1 + (v₁ *v₂/c²))
where v is the relative velocity between two objects, v₁ is the velocity of the first object relative to a third reference point, v₂ is the velocity of the second object relative to the same reference point, and c is the speed of light.
In this case, we can consider the first planet as our reference point, and we have the following values:
- v₁ = 0 (since the first planet is stationary)
- v₂ = -0.75c (since the spaceship is approaching the second planet at 0.750c, which is a negative velocity relative to the second planet)
- c = 1 (since we're using units where the speed of light is 1)
Plugging these values into the formula, we get:
v = (0 + (-0.75)) / (1 + (0*(-0.75)/1²))
v = -0.8824c
Therefore, the velocity of the spaceship relative to the first planet is -0.8824c, which means it is moving away from the first planet at 0.8824 times the speed of light.
To know more about collision, refer
https://brainly.com/question/24915434
#SPJ11
Scientists speculate that the properties (laws) of the universe must be the way they are because if they were significantly different, we would not be here to think about them. This idea is called
The idea that the properties of the universe are finely tuned to support life and that any significant deviation from these properties would make life impossible is called the anthropic principle.
It suggests that the universe appears to be designed for the existence of intelligent life because any other type of universe would not allow the emergence and evolution of life forms. The anthropic principle is a controversial topic in the philosophy of science and cosmology, and there are different versions of it, including the weak anthropic principle and the strong anthropic principle.
Learn more about anthropic principle here:
https://brainly.com/question/31670787
#SPJ11
Router sockets for wire and optical fiber cords are called ________. Router sockets for wire and optical fiber cords are called ________. interfaces ports sockets plugs
Router sockets for wire and optical fiber cords are called interfaces or ports, which are typically labeled as Ethernet ports, WAN ports, or SFP ports.
However, they can also be referred to as sockets or plugs, although these terms are less commonly used in networking terminology.
Optical fiber is a type of transmission medium used in telecommunications. It consists of thin strands of glass or plastic that are designed to transmit light signals over long distances. The use of optical fiber allows for high-speed data transfer rates and provides many advantages over traditional copper wire cables.
Telecommunications plays a crucial role in connecting people and businesses around the world and enabling the exchange of information, data, and ideas. It has revolutionized the way we live, work, and interact with each other, and continues to evolve rapidly with advances in technology.
To learn more about optical fiber refer here:
https://brainly.com/question/3902191#
#SPJ11