Two coherent sources of intensity ratio 1 : 4 produce an interference pattern. The visibility of fringes will be a. 1
b. 0.6
c. 0.8
d. 0.4

Perfect inelasticity governs the collision. Both athletes go north at a speed of 2 m/s just after the tackle. Prior to the tackle, the 90 kg athlete was moving at a speed of 6 m/s south.

In an inelastic collision, momentum is preserved, hence we may apply the equation: (m1 * v1) plus (m2 * v2) equals (m1 + m2) * vf.

The following is the result of substituting the above values: (90 kg * v1) + (120 kg * (-4 m/s)) = (90 kg + 120 kg) * 2 m/s

When we simplify the equation, we obtain: 90v1 - 480 = 210 90v1 = 690\sv1 = 7.67 m/s They move at a speed of -4 m/s. As a result, the player weighing 90 kg was moving at the following speed right before the tackle: south

Nevertheless, the question specifically asks for the northward velocity shortly before the tackle, therefore we must adjust the sign:

North: v1 = -11.67 m/s plus 2 m/s equals -9.67 m/s

Prior to the tackle, the 90 kg athlete was moving at a speed of 6 m/s south.

learn more about speed here:

https://brainly.com/question/28224010

#SPJ4

Price elasticity of demand for radios is 1 and total revenue from radio sales will remain constant.

Price elasticity of demand is calculated as the percentage change in quantity demanded divided by the percentage change in price. Using this formula, we can calculate the price elasticity of demand for radios as follows:

Price elasticity of demand = (percentage change in quantity demanded) / (percentage change in price)

Given that when the price of radios decreases by 5%, quantity demanded increases by 5%.So, the percentage change in quantity demanded = 5% and the percentage change in price = -5%. (Because price has decreased by 5%.)Price elasticity of demand = (5% / -5%) = -1.The negative sign indicates that the demand is elastic. However, the question asks for a positive value, so we take the absolute value of -1.Price elasticity of demand = 1.

Therefore, the price elasticity of demand for radios is 1.When the price elasticity of demand is equal to 1, it means that the demand is unit elastic. This implies that the percentage change in quantity demanded is equal to the percentage change in price. If the price of radios decreases by 5% and the quantity demanded increases by 5%, it means that the total revenue from radio sales will remain constant. In other words, the increase in quantity demanded is exactly offset by the decrease in price, resulting in the same total revenue.

More price elasticity: https://brainly.com/question/22716533

#SPJ11

The imperial weight of the bike is approximately 20 lbs.

Imperial units, also known as British Imperial System, are a system of units of measurement used in the United Kingdom and its former colonies.

To convert the weight of the bike from metric to imperial units, we can use the following conversion factors

1 kilogram (kg) = 2.20462 pounds (lbs)

1 pound (lb) = 0.453592 kilograms (kg)

So, to find the imperial weight of the bike, we need to convert the weight of the bike from kilograms to pounds:

9070 g = 9070/1000 kg = 9.07 kg

9.07 kg = 9.07 x 2.20462 lbs

= 19.9996 lbs

≈ 20 lbs

Learn more about Imperial weight here

brainly.com/question/850698

#SPJ4

The current in the battery increases and the magnetic field generated is stronger, which causes a larger induced current in the wire loop. This current will also be in the opposite direction of the battery current.

A circuit with a battery and a variable resistor near a loop of wire will cause an induced current in the loop when the resistance of the resistor is decreased. This is known as electromagnetic induction, which occurs when the current in the loop of wire changes, generating a changing magnetic field. This magnetic field then causes a current in the nearby wire loop. In this case, when the resistance of the resistor is decreased,

for such more questions on electromagnetic induction

https://brainly.com/question/27613726

#SPJ11

The correct answer is the car that is turning experiences no net force.

A net force is the sum of all forces acting on an object, taking into account their magnitude and direction. If an object is not in equilibrium, it experiences a net force, which causes it to accelerate. In physics, a net force, often known as unbalanced force, is defined as the total sum of all forces that act on an object. If the forces acting on an object are balanced, meaning they are the same size but opposite in direction, the object will maintain a constant speed with no acceleration.

In this scenario, the car speeding up experiences the greater acceleration. The car that is turning, on the other hand, experiences no net force since the force acting on the car, the centripetal force, is equal to the force required to maintain its motion.

Therefore, the answer is option D. The car that is turning experiences no net force.

Learn more about net force here:

https://brainly.com/question/14361879

#SPJ11

The distance xcm from the mortar to the center of mass of the exploded pieces is xcm = 1.00d.

Therefore, the distance xcm from the mortar to the center of mass of the exploded pieces is found as follows:

When an object is thrown upward, it will move upward until the velocity reaches zero at its highest point. The acceleration of an object in free fall is -9.81 m/s². This acceleration is constant since it is only affected by gravity. Therefore, the distance traveled by an object in free fall is given by the formula

d = v₀₊ + 1/2gt²

Where v₀ is the initial velocity (in this case, ₀ since the objects are at rest at the moment of explosion), t is the time of flight, g is the acceleration due to gravity.

Since both pieces land at the same time, they have the same time of flight. We can set the distance traveled by the two pieces equal to each other and solve for xcm. That is

d₁ = d₂

v₀₊ + 1/2gt² = v₀₊ + 1/2gt²

Canceling v₀₊ and solving for t, we have

t = √(2d/g)

Substituting this value of t into the first equation above, we have

d₁ = 1/2gt²

d₂ = 1/2gt²

Substituting the given value of g = 9.81 m/s² and assuming that d₁ + d₂ = xcm, we have

xcm = 1/2gt²
       = 1/2(9.81)(2d/g)
       = 1.00d

Therefore, the distance xcm from the mortar to the center of mass of the exploded pieces is xcm = 1.00d.

Full task:

The two exploded pieces of the shell land at the same time. At the moment of landing, what is the distance xcm from the mortar to the center of mass of the exploded pieces?

Learn more about distance: https://brainly.com/question/28551043

#SPJ11

18.75 m/s² is the acceleration brought on by gravity on the unidentified planet.

9.8 m/s2 is the acceleration caused by gravity at or close to the surface of the Earth. The force of gravity causes items to fall towards the ground.

The acceleration brought on by gravity on the unidentified planet may be calculated using the equation of motion for a falling object:

d = 1/2 * g * t²

where d is the object's displacement, g is the acceleration brought on by gravity, and t is the passing of time.

This equation can be changed in order to account for g:

g = 2 * d / t²

Plugging in the given values:

d = 1.5 m

t = 0.4 s

g = 2 * 1.5 m / (0.4 s)²

g = 18.75 m/s²

To know more about acceleration visit:-

https://brainly.com/question/30660316

#SPJ1

Answer:

The habitable zone

Explanation:

The habitable zone is the area around a star where conditions are right for liquid water to exist on a planet's surface.

(a) Tension (T) does positive work. (b) Air resistance (R) does negative work. (c) Gravity (Fg) does zero work.

Whenever a mass is hung on a string and is left to swing from its highest point to the lowest point, it experiences three forces, which are tension (T), air resistance (R), and gravity (Fg).The force that does positive work is tension (T). Tension is the force acting on the mass towards the midpoint of its swing. The tension in the string is the force responsible for the work done on the mass during its oscillation from the highest point to the lowest point. When the mass moves in the direction of the tension, the tension does positive work.

The force that does negative work is air resistance (R). Air resistance opposes the motion of the mass, and since the motion of the mass is in the direction of gravity, air resistance does negative work on the mass. The force that does zero work is gravity (Fg). Since the motion of the mass is perpendicular to gravity, gravity does no work on the mass.

Learn more about Air resistance:

https://brainly.com/question/27888011

#SPJ11

True. A Faraday bag (also known as an electromagnetic bag) is a container made from metal or a special material that blocks any electromagnetic emanations from passing into or out of the bag, preventing a mobile device from communicating with the outside world.

This is because Faraday bags are electromagnetic bags that are designed to isolate electronic devices from external electromagnetic influence. They are also known as radiofrequency shielding bags, Faraday cage bags, signal blocker bags, or electromagnetic pulse (EMP) bags.

What are Faraday bags?

Faraday bags are made of a combination of metal or metal-coated fabrics that are designed to block electromagnetic signals from entering or leaving the bag. They are usually used to keep mobile devices such as smartphones and tablets from communicating with the outside world, especially in situations where an individual is worried about their privacy or security. They are also used by law enforcement agencies to prevent suspects from remotely wiping or deleting evidence on their devices.

How do Faraday bags work?

Faraday bags work by using a principle known as the Faraday effect, which states that any electric field in a conductor is shielded from the conductor's interior by the presence of an electric field. Faraday bags use this principle to block incoming and outgoing signals by creating an electrically conductive enclosure around the device. This means that when a mobile device is placed inside a Faraday bag, the bag acts as a Faraday cage, which shields the device from electromagnetic radiation. As a result, the device cannot communicate with the outside world.

For further details about Faraday bag, click on the below link:

https://brainly.com/question/23083952

#SPJ11

VB is presented as a single configuration of electrons in hybrid orbitals, spin paired in bonds, while MO is presented as a single configuration of molecular orbitals arranged in order of increasing energy and filled with electrons in accordance with Hund's rule.

Hund's rule is a principle in quantum mechanics that describes how electrons fill energy levels in an atom. The rule states that when filling subshells of the same energy level, electrons will occupy separate orbitals with parallel spins before they start to pair up. In other words, when there are multiple empty orbitals at the same energy level, electrons will occupy each one singly before pairing up.

Hund's rule is an important concept in many areas of physics, including atomic and molecular physics, solid-state physics, and materials science. It is used to predict the electronic structure and properties of a wide range of systems, from individual atoms to complex molecules and solids.

To learn more about Hund's rule visit here:

brainly.com/question/12646067

#SPJ4

The work done by friction is 20 J.

According to the law of conservation of energy, the total mechanical energy of a system remains constant if no external work is done on the system. In this case, we can use this law to calculate the work done by friction as follows

The initial mechanical energy of the ball at the top of the hill is

Ei = PE = 100 J

The final mechanical energy of the ball at the bottom of the hill is

Ef = KE + PE = 80 J, where KE is the kinetic energy of the ball.

Since the ball is at rest at the top of the hill, its initial kinetic energy is zero. Therefore, the initial and final kinetic energies are

Ei = 0 J

Ef = KE = 80 J

The work done by friction is equal to the difference between the initial and final mechanical energies

Wf = Ei - Ef = 100 J - 80 J = 20 J

Learn more about work done here

brainly.com/question/30280752

#SPJ4

The current of the ideal current source in the given circuit is zero.

This is because the current source is not providing any current and the 5 ohm resistor is not providing any resistance. Thus, no current can flow through the circuit.

In this circuit, there is a current source with 6 volts and a 5 ohm resistor. The current source does not provide any current since it is ideal, meaning it does not create any voltage drops. Therefore, no current can flow through the circuit.

This is because there is no voltage difference between the two nodes (points) between which the current is supposed to flow.

The 5 ohm resistor also does not provide any resistance, meaning the same current would flow through the resistor as well. Thus, the current of the ideal current source in the given circuit is zero.

To know more about voltage drops click on below link:

https://brainly.com/question/28164474#

#SPJ11

The outer edge of the photosphere of the sun is the region where all the photons produced in the sun's core are absorbed. Therefore, the correct option is (C) Photosphere.

The photosphere is the outermost region of the sun's atmosphere that is visible. It is a thin layer of gas that generates the visible light that we see. It is the region of the sun that has the greatest intensity of light and the lowest temperature.

The light that passes through the photosphere of the sun is then absorbed and re-emitted at various wavelengths by the other parts of the sun's atmosphere, such as the chromosphere and corona. Consequently, the photosphere is the only region of the sun that we can directly observe.

The sun's core is the area where the fusion of hydrogen atoms takes place, producing tremendous amounts of energy that are emitted as light and heat. The core of the sun is the primary source of energy for all the planets in the solar system, as well as for life on Earth.

The core of the sun has a temperature of roughly 15 million degrees Celsius and a density of about 150 times that of water. It is shielded from us by the sun's outer layers, making it impossible to see it directly. However, through studying the light and other radiation emitted by the sun, scientists can gain a better understanding of the processes that occur in the sun's core.

Learn more about photosphere: https://brainly.com/question/1168165

#SPJ11

At every location along the string, the amplitudes of two waves that interfere with one another are added. The two separate waves combine to form the final wave.

Two transverse waves are present in this instance, one traveling to the right and the other to the left. The waves will interact destructively when they meet since their motions are in opposition.

The resultant wave f(x) at any point x on the string may be calculated by summing the two amplitudes if we let f1(x) represent the amplitude of the wave going to the right and f2(x) represent the amplitude of the wave moving to the left:

f(x) = f1(x) + f2(x)

The amplitudes of the two waves will be equal in size and facing in opposite directions when they collide. As a result, the amplitude that results will be zero, and the string will then be at rest.

The resulting wave will alternate between constructive and destructive interference as the waves continue to travel past one another.

As a result, the string will develop a pattern of nodes (points of zero displacements) and antinodes (points of maximum displacement).

The combined frequency and wavelength of the various waves as well as the rate of wave propagation along the string will determine the final wave's frequency and wavelength.

learn more about transverse waves here

https://brainly.com/question/15531840

#SPJ1

E = mgh

where m is the mass of the sled, g is the acceleration due to gravity, and h is the height of the hill.

At the bottom of the hill, all of the potential energy has been converted into kinetic energy, which is given by:

E = (1/2)mv^2

where v is the velocity of the sled at the bottom of the hill.

When the sled reaches the level stretch, the kinetic energy is converted into work done by the friction force, which is given by:

W = fd

where f is the friction force and d is the distance traveled across the level stretch.

Setting the potential energy at the top of the hill equal to the work done by the friction force on the level stretch, we have:

mgh = fd

Solving for h, we get:

h = (fd)/(mg)

Substituting the given values, we get:

h = (0.27)(m)(9.8 m/s^2)(19 m)/(m)(9.8 m/s^2)

Simplifying, we get:

h = 5.13 m

Therefore, the height of the hill is 5.13 meters.

Answer:

(B)   hot air is lighter than cold air

P V = N R T       ideal gas equation

If T (temperature) is smaller then N (number of moles) must be larger if other quantities remain constant,

The electric potential at point A is [tex]\rm Va= kq/L ln\sqrt{L/2^{2} + d^{2} + L/2 /\sqrt{L/2^{2} + d^{2} - L/2[/tex] and the electric potential at point B is [tex]\rm Vb = kq/L ln (L + d /d)[/tex].

The electric potential at a specific point is the work required to transport a unit of positive charge from a distance of infinite distance to that specific point. SI units of electric potential are volts (V), which can also be expressed as Joules per Coulomb.

Part A) Considering a small length dx of a charge at a distance r from point A and distance x from the vertical axis.

The total charge on the rod of length L is q

The charge on small length dx is

[tex]\rm q = q/L. dx[/tex]

The expression for r can be written using the Pythagoras theorem-

[tex]\rm r = \sqrt{x^{2} + d^{2}[/tex]

The expression for electric potential at A due to charge dq at N.

[tex]\rm dV = kdq/r[/tex]

Substituting the value of dq and r in the above equation we get

[tex]\rm dV = k q/L. dx / \rm\sqrt{x^{2} + d^{2}[/tex]

[tex]\rm dV = kq \times dx/ L\times\sqrt{x^{2} + d^{2} }[/tex]

Integrating this equation we get:

[tex]\rm Va= kq/L ln\sqrt{L/2^{2} + d^{2} + L/2 /\sqrt{L/2^{2} + d^{2} - L/2[/tex]

The equation shows the electric potential at point A.

Part B) In the same way, electric potential Vb at point B is determined  

[tex]\rm Vb = kq/L ln (L + d /d)[/tex]

Thus, the potential difference at points A and B is [tex]\rm Va= kq/L ln\sqrt{L/2^{2} + d^{2} + L/2 /\sqrt{L/2^{2} + d^{2} - L/2[/tex] and [tex]\rm Vb = kq/L ln (L + d /d)[/tex] respectively.

To learn more about the electric potential, refer to the link:

https://brainly.com/question/12645463

#SPJ12

The image of the rod in question is attached below.

This equation can be used to determine the equivalent resistance of two parallel resistors: 1/Req = 1/R1 + 1/R2 Upon solving for Req, we obtain: Requirement = (R1-R2) / (R1+R2)

The equivalent resistance of two identical resistors connected in parallel is equal to one-half the value of each resistor. Both share an equal amount of the current.

Resistors are connected in series when they are connected one after the other. This is seen below. You add up the individual resistances to determine the total overall resistance of several resistors connected in this manner. The following equation is used to accomplish this: Rtotal = R1 + R2 + R3 and so forth.

To know more about resistance visit:-

https://brainly.com/question/13110234

#SPJ1

In summary, the time constant of an RC circuit is the product of the resistance and capacitance, and is a measure of the time taken for the voltage across the capacitor to reach 63.2% of the applied voltage.

The time constant of an RC circuit is the product of the resistance (R) and capacitance (C). To calculate it, you need to multiply the resistance in ohms (Ω) by the capacitance in Farads (F). The result is measured in seconds (s).
For example, for an RC circuit with a resistance of 10 Ω and a capacitance of 0.25 F, the time constant would be 2.5 s (10 Ω × 0.25 F = 2.5 s).
The time constant of an RC circuit is important because it determines how long it takes for the voltage across the capacitor to reach 63.2% of the applied voltage. This is known as the charging time, and it is inversely proportional to the RC time constant.
In an RC circuit, the voltage across the capacitor is initially 0, and increases as time passes. As it increases, the current through the resistor decreases. This is because the capacitor acts as an open circuit in the initial stages, and then gradually allows current to pass as it charges up. After 5 time constants, the voltage across the capacitor reaches almost the same as the voltage of the source.

for such more questions on circuits

https://brainly.com/question/19865219

#SPJ11

During free fall, an object is subject to the force of gravity and its acceleration is equal to the acceleration due to gravity (g), which is approximately 9.81 meters per second squared (m/s²) near the surface of the Earth.

If an object is flying upward during free fall, its acceleration will still be equal to -9.81 m/s² (note the negative sign indicating that the acceleration is downward). This is because the direction of the acceleration due to gravity is always toward the center of the Earth.

Even if an object is moving upward, it is still subject to the gravitational force, which causes it to decelerate until it reaches its highest point and then starts to fall back down.

To learn more about acceleration refer to:

brainly.com/question/30762941

#SPJ4

Given equal-sized samples (volumes) of galena and quartz, the Galena sample will feel heavier because of its higher specific gravity. Thus, the correct option is A.

Specific gravity is the ratio of the density of a substance to the density of a standard substance in physics. It's typically applied to liquids and solids, but it may also be applied to gases. The most often utilized standard material for liquids and solids is water at 4°C. A substance's specific gravity is dimensionless and is often represented by the Greek symbol ρ.

Relative Density of the given substances:

Galena's specific gravity is 7.5, Quartz's specific gravity is 2.65, and Liquid mercury's specific gravity is 13.6. An object with a specific gravity greater than 1 sinks in water, while one with a specific gravity less than 1 floats in water. The specific gravity of water is 1.0. An object with a specific gravity greater than 1 sinks in water, while one with a specific gravity less than 1 floats in water.

We can conclude from the values above that liquid mercury is heavier than galena, which is in turn heavier than quartz. Therefore, since both quartz and galena are being measured with equal sizes or volumes, galena will feel heavier than quartz.

Therefore, the correct option is A.

Learn more about Specific gravity here:

https://brainly.com/question/9100428

#SPJ11

In the experiment, absorbance was measured using a spectrophotometer. A spectrophotometer is a piece of equipment used in science to gauge how much light a sample in a solution absorbs.

The basic principle of a spectrophotometer is to measure the intensity of light before and after it passes through a sample. The difference in intensity is used to determine the amount of light absorbed by the sample, which in turn can be used to calculate the concentration of the substance in the sample.

There are two main types of spectrophotometers: single-beam and double-beam. In a single-beam spectrophotometer, the sample and reference cuvettes are alternately placed in the path of a single beam of light. In a double-beam spectrophotometer, the sample and reference cuvettes are placed in the path of two separate beams of light, which are then compared to each other. Spectrophotometers are widely used in analytical chemistry, biochemistry, and other scientific fields to analyze the composition of a wide range of samples, including biological fluids, environmental samples, and industrial materials. They are also used in quality control processes for pharmaceuticals, food products, and other consumer goods.

learn more about spectrophotometer here

https://brainly.com/question/30724865

#SPJ4

We can see the moons should be ranked in the following order from oldest to youngest:

A moon is a natural satellite that orbits a planet. Moons are typically much smaller than their parent planets and are held in orbit by the planet's gravity. They come in a variety of sizes and shapes, and can be composed of a wide range of materials, such as rock, ice, or a mixture of both.

Moons play an important role in our solar system. They help stabilize the orbits of planets, contribute to tidal forces, and may even play a role in the formation and evolution of planets themselves.

Learn more about moon on https://brainly.com/question/12676209

#SPJ1

It will take 0.82sec to reach the edge of the table if the system is free to move. If mB=1.0 kg, 99 kg mA must be used if the system's acceleration is to be kept above 1/100 g.

(a) mA = 11 kg

mB = 7 kg

T = mA mB g / (mA+mB) = 77*9.8 / 18 = 41.92 N is the formula for cord tension.

In the case of mA, we have T = mA*a

acceleration of mA, a = T / mA = 41.92 / 11 = 3.81 m/s²

For mB, we have mB*a = mB*g - T a = (mB*g - T) / mB

                                  a = (7*9.8 - 41.92) / 7 = 3.81 m/s²

(b) Initial velocity of mA, u = 0

The distance traveled by mA, s = 1.3 m

We have,

[tex]s = u t + (1/2) a t^2\\ s = at^2 / 2\\ t = (2s / a)^(1/2) = (2*1.3 / 3.81) (1/2) = 0.82 sec[/tex]

(c) mB = 1 kg

The system's acceleration, a = g/100

The system's acceleration is given by the formula a = mB*g / (mA+mB).

mA = [mB*g / a] - mB = [ 1*9.8*100/9.8 ] - 1 = 99 kg

Acceleration is the rate at which velocity changes with respect to time. It is a vector quantity whose magnitude denotes the amount of change in velocity per unit of time.

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ4

The resistance of the copper wire is approximately 0.026 ohms and the change in voltage from one end of the wire to the other end is approximately 0.39 volts.

To calculate the resistance of the copper wire, we can use the formula:

R = ρL/A

where R is the resistance in ohms, ρ is the resistivity of copper (1.68×10−8 ohm-meters), L is the length of the wire in meters, and A is the cross-sectional area of the wire in square meters.

First, we need to convert the diameter of the wire to meters:

d = 1.63 mm = 0.00163 m

Then, we can calculate the cross-sectional area of the wire:

A = πd2/4 = 2.08×10−6 m2

Now we can plug in the values and solve for R:

R = (1.68×10−8)(29.0)/2.08×10−6 = 0.026 ohms

To calculate the change in voltage from one end of the wire to the other end, we can use Ohm's law:

V = IR

where V is the voltage in volts, I is the current in amperes, and R is the resistance in ohms.

Plugging in the values, we get:

V = (15.0)(0.026) = 0.39 volts

Therefore, the change in voltage from one end of the wire to the other end is approximately 0.39 volts.

For more similar questions on electrical circuits and Ohm's law:

brainly.com/question/20565578

#SPJ11

The vertical component of force that must be exerted by the "anchor" on the bend to hold it in position is FV = (10 - 8,5) 1,77 + (17,73 - 0) 62,4 . 32,2.5 = 1,719,09 lb.

The vertical component of force that must be exerted by the "anchor" on the bend to hold it in position is determined by the following equation:

FV = (p1 - p2) A + (V2 - V1) ρ gL

Where:

So, the vertical component of force that must be exerted by the "anchor" on the bend to hold it in position is: FV = (10 - 8,5) 1,77 + (17,73 - 0) 62,4 . 32,2.5 = 1,719,09 lb.

Learn more about vertical components of force: brainly.com/question/29996171

#SPJ11

Answer:

The eight planets, the sun and the satellites constitute the solar system. Previously, there were nine planets, but Pluto is no longer recognised as a planet now. The sun is at the centre of the solar system, and all eight planets revolve around it. The rotation and revolution of the planets cause the change of the season and day and night.

Paragraph on Solar System in 150 Words

The sun, eight planets, and satellites make up the solar system. Asteroids, comets, dust, small planets, and gas are among the other objects found in space. The Sun, Mercury, Venus, Earth, and Mars make up the inner solar system, whereas the asteroid belt is between Mars and Jupiter’s orbit. According to our knowledge, there are around 500 solar systems in the universe. The outer solar system planets are Jupiter, Saturn, Uranus, and Neptune. The sun is at the centre of the solar system, and the planets revolve around it in their own orbits. The rotation of the planets causes the days and nights, and the changing of seasons is caused by the revolution of the planets around the sun. Our solar system exists in the Milkyway galaxy. According to scientists and astronomers, the earth is the only planetary body where life can exist. But this can be proven wrong after more discoveries about the universe.

Our solar system is unique in that it supports life on its third planet. Children are taught about the solar system in their schools as it is an important part of our lives. In order to write about the solar system, you can refer to the samples provided

Paragraph on Solar System in 100 Words

As per our knowledge, there are approximately 500 solar systems in the universe. The solar system consists of the sun, the eight planets and the satellites. Other than these, there are asteroids, comets, dust, minor planets, and gas. The Sun, Mercury, Venus, Earth and Mars constitute the inner solar system, and the asteroid belt lies between the orbit of Mars and Jupiter. Jupiter, Saturn, Uranus, and Neptune are the outer solar system planets. The rotation of the planets causes the day and night, and the revolution of planets around the sun causes the change of seasons. Our solar system is present in the Milkyway galaxy. As per astronomers and scientists, the earth is the only planetary body that supports life.

Paragraph on Solar System in 150 Words

The sun, eight planets, and satellites make up the solar system. Asteroids, comets, dust, small planets, and gas are among the other objects found in space. The Sun, Mercury, Venus, Earth, and Mars make up the inner solar system, whereas the asteroid belt is between Mars and Jupiter’s orbit. According to our knowledge, there are around 500 solar systems in the universe. The outer solar system planets are Jupiter, Saturn, Uranus, and Neptune. The sun is at the centre of the solar system, and the planets revolve around it in their own orbits. The rotation of the planets causes the days and nights, and the changing of seasons is caused by the revolution of the planets around the sun. Our solar system exists in the Milkyway galaxy. According to scientists and astronomers, the earth is the only planetary body where life can exist. But this can be proven wrong after more discoveries about the universe.

Answer:ok

Explanation:

The eight planets, the sun and the satellites constitute the solar system. Previously, there were nine planets, but Pluto is no longer recognised as a planet now. The sun is at the centre of the solar system, and all eight planets revolve around it. The rotation and revolution of the planets cause the change of the season and day and night.

Paragraph on Solar System in 150 Words

The sun, eight planets, and satellites make up the solar system. Asteroids, comets, dust, small planets, and gas are among the other objects found in space. The Sun, Mercury, Venus, Earth, and Mars make up the inner solar system, whereas the asteroid belt is between Mars and Jupiter’s orbit. According to our knowledge, there are around 500 solar systems in the universe. The outer solar system planets are Jupiter, Saturn, Uranus, and Neptune. The sun is at the centre of the solar system, and the planets revolve around it in their own orbits. The rotation of the planets causes the days and nights, and the changing of seasons is caused by the revolution of the planets around the sun. Our solar system exists in the Milkyway galaxy. According to scientists and astronomers, the earth is the only planetary body where life can exist. But this can be proven wrong after more discoveries about the universe.

Our solar system is unique in that it supports life on its third planet. Children are taught about the solar system in their schools as it is an important part of our lives. In order to write about the solar system, you can refer to the samples provided

Paragraph on Solar System in 100 Words

As per our knowledge, there are approximately 500 solar systems in the universe. The solar system consists of the sun, the eight planets and the satellites. Other than these, there are asteroids, comets, dust, minor planets, and gas. The Sun, Mercury, Venus, Earth and Mars constitute the inner solar system, and the asteroid belt lies between the orbit of Mars and Jupiter. Jupiter, Saturn, Uranus, and Neptune are the outer solar system planets. The rotation of the planets causes the day and night, and the revolution of planets around the sun causes the change of seasons. Our solar system is present in the Milkyway galaxy. As per astronomers and scientists, the earth is the only planetary body that supports life.

The average velocity of water flowing through a pipe with a cross-sectional area of 0.002 m² at a mass flow rate of 4 kg/s is 2 m/s.

The formula for average velocity is:

v = Q / A

Where:

The formula for volume flow rate is:

Q = m / ρ

Where:

Substituting the values:

Given that the cross-sectional area of the pipe is 0.002 m², the mass flow rate is 4 kg/s, and the density of water is 1000 kg/m³, the average velocity is:

Therefore, the average velocity of water flowing through a pipe with a cross-sectional area of 0.002 m² at a mass flow rate of 4 kg/s is 2 m/s.

Learn more about velocity: https://brainly.com/question/25749514

#SPJ11

The proper responses are: The head-on collision results in a bigger change in momentum. In a head-on collision, the driver is subjected to a greater average force.

Explanation: When an automobile collides, the external force acting on it causes a change in the vehicle's momentum. ... a The shift in momentum is greater in a head-on collision because the relative speeds of the two vehicles are higher. This increases the probability of injury because more force is being exerted to the car and its occupants. In addition, due of the shorter duration of impact in a head-on collision, the average force on the driver is higher. in a crash with the back. As a result, there is a higher average force since the force is delivered for a shorter period of time. Although this happens in both head-on and rear-end collisions, the collapse of the crumple zone in the front of the automobile also helps to absorb impact energy. The chance of injury in a collision is not primarily determined by the driver's momentum and velocity in relation to the ground, however they may have an impact on the degree of the injury.

learn more about injury here:

https://brainly.com/question/28450125

#SPJ4