Tony is interviewing with the hiring manager for an IT job.

What should he do during the interview?

Follow up with an email.
Make eye contact.
Practice answering interview questions.
Research the company.

Overlapping instructions allowing more than one instructions to be worked on at a time is known as "Pipelining ". Option D is the correct answer.

Pipelining is a technique in computer architecture that allows overlapping instructions to be worked on at the same time. It breaks down the execution of instructions into multiple stages and allows each stage to work on a different instruction simultaneously. This overlapping of instructions helps in improving the overall performance and efficiency of the processor.

In a pipelined architecture, while one instruction is being executed, the next instruction can be fetched, and the following instruction can be decoded. This overlapping of different stages of instruction execution reduces the idle time of the processor and increases its throughput. Pipelining is a common technique used in modern processors to achieve faster and more efficient instruction execution.

Option D is the correct answer.

You can learn more about Pipelining at

https://brainly.com/question/31504724

#SPJ11

Okay, let's break this down step-by-step:

bn = 5n + bn-1 (recurrence relation)

b1 = 4 (initial condition)

So we can unroll this for a few terms:

b2 = 5(2) + b1 = 10 + 4 = 14

b3 = 5(3) + b2 = 15 + 14 = 29

b4 = 5(4) + b3 = 20 + 29 = 49

We see a pattern: bn = 5n + 5(n-1) + 5(n-2) + ... + b1

So bn = 5n(n+1)/2

To find b64:

b64 = 5(64)(65)/2 = 5(3280) = 16079

So the value of b64 is 16079.

Let me know if you have any other questions!

Where the above recurrence relation is given,  the value of b64 is 16079.

A recurrence relation is a rule-based equation that represents a series.

bn = 5n + bn-1 (recurrence relation)

b1 = 4 (initial condition)

So we can unroll this for a few terms:

b2 = 5(2) + b1 = 10 + 4 = 14

b3 = 5(3) + b2 = 15 + 14 = 29

b4 = 5(4) + b3 = 20 + 29 = 49

We see a pattern: bn = 5n + 5(n-1) + 5(n-2) + ... + b1

So bn = 5n(n+1)/2

To find b64:

b64 = 5(64)(65)/2 = 5(3280) = 16079

So the value of b64 is 16079.

Learn more about Recurrence Relation:
https://brainly.com/question/30895268
#SPJ4

The virtual page numbers and offsets are as follows: (4 KB) 20000 => VPN: 4, Offset: 1984; 32768 => VPN: 8, Offset: 0; 60000 => VPN: 14,

How we compute the virtual page number and offset for 4 KB and 8 KB page sizes?

For the given decimal virtual addresses (20000, 32768, 60000) and page sizes of 4 KB and 8 KB:

- To compute the virtual page number, we divide the address by the page size.

- For a 4 KB page, the virtual page number is obtained by dividing the address by 4096.

- The offset is calculated as the remainder of the address divided by the page size.

- For an 8 KB page, the virtual page number is obtained by dividing the address by 8192.

- The offset represents the remainder of the address divided by 8192.

- By applying these calculations, we can determine the virtual page number and offset for each given decimal virtual address with respect to both 4 KB and 8 KB page sizes.

Learn more about virtual page numbers

brainly.com/question/31990467

#SPJ11

The blank is filled by the term "Sequence diagram". A sequence diagram is a graphical representation of a use case that showcases the interactions between the system and actors or objects, by displaying the sequence of messages exchanged between them.

It emphasizes the chronological order of events and illustrates the flow of control and data in a scenario. The sequence diagram depicts the participating classes and their interactions, along with the timing constraints and conditions that apply to each message. It is a powerful tool for visualizing complex scenarios, identifying potential errors and improving the design of the system. By providing a clear and concise view of the use case, the sequence diagram helps stakeholders to communicate and understand the requirements and functionality of the system.

learn more about "Sequence diagram" here:

https://brainly.com/question/32247287

#SPJ11

The data that is used to build a data mining model is called training data. It is the set of data that is used to train a model so that it can learn patterns, relationships, and other insights that are hidden within the data.

For such more question on algorithms

https://brainly.com/question/13902805

#SPJ11

Big data refers to large, complex, and diverse datasets that traditional data processing tools and techniques cannot handle. It is characterized by the four V's - volume, variety, velocity, and veracity. Big data can come from a variety of sources, including social media, sensors, devices, and transactional systems.

Big data analytics involves using advanced technologies and techniques to analyze large and complex datasets to extract insights and valuable information. This can include machine learning, data mining, natural language processing, and predictive analytics. Big data analytics can help organizations to make data-driven decisions, improve operational efficiency, optimize resource utilization, and gain competitive advantages.

However, big data analytics also poses challenges, such as data privacy and security concerns, data quality issues, and the need for specialized skills and expertise. It is important for organizations to have a clear understanding of their big data goals and objectives, as well as the risks and opportunities associated with big data analytics, to effectively leverage big data for their business.

Learn more about data here:

https://brainly.com/question/10980404

:#SPJ11

Without the context of a specific processor architecture or instruction set, it is not possible to provide the instruction type and assembly language instruction for the given binary value.

The binary value you provided is "0000 0000 0001 0000 1000 0000 1011 0011". To give you an accurate answer, I'll break down the instruction type and assembly language instruction.
Instruction Type: The first few bits of the binary value usually represent the operation code (opcode) which indicates the type of instruction. In this case, we need more context or a specific processor architecture to determine the exact instruction type.
Assembly Language Instruction: Assembly language is a low-level programming language that uses mnemonic codes to represent machine code instructions. To determine the assembly language instruction for the given binary value, we'd need to know the processor architecture or instruction set being used. Different processors have different opcodes and formats for assembly language instructions.
In summary, without the context of a specific processor architecture or instruction set, it is not possible to provide the instruction type and assembly language instruction for the given binary value.

To know more about binary number visit :

https://brainly.com/question/31102086

#SPJ11

Blockchain technology does not directly mitigate the threat of cyber-crime in financial services businesses with latency risk.

While blockchain technology offers various security benefits, it does not directly address the specific concern of latency risk in financial services businesses. Latency refers to the delay or time lag in the processing and transmission of data. Cyber-crime in financial services often involves activities such as unauthorized access, data breaches, or fraudulent transactions, which can occur irrespective of the latency in the system.

However, it's important to note that blockchain can enhance security in financial services by providing features such as immutability, transparency, and decentralized consensus. These characteristics can help mitigate certain types of cybercrime risks, such as tampering with transaction records or unauthorized modifications. Additionally, blockchain can offer improved data integrity and auditability, which can aid in the detection and prevention of fraudulent activities.

To address latency risk in financial services, businesses typically employ other measures such as optimizing network infrastructure, using high-speed data processing systems, or implementing real-time monitoring and response mechanisms. These strategies focus on reducing the delay in data processing and transmission, thereby minimizing the potential for latency-related issues and enabling timely detection and response to cyber threats.

Learn more about  network here: https://brainly.com/question/30456221

#SPJ11

The first step a technician should take in resolving the issue of a user having problems connecting to a SOHO Wi-Fi network via their mobile device is to determine if any other devices are experiencing the same issue.

This will help the technician identify whether the problem is with the network or with the mobile device. If other devices are experiencing the same issue, the problem may be with the network, and the technician can proceed with troubleshooting the network. However, if only the mobile device is experiencing the problem, the technician may need to reset the network settings on the mobile device or perform other troubleshooting steps.

It is important to identify the root cause of the problem before taking any action to ensure that the issue is resolved properly and in a timely manner.

Learn more about network here:

https://brainly.com/question/29350844

#SPJ11

In the communication process, the pathway through which the message is sent is known as the medium. The communication process involves the transmission of a message from a sender to a receiver through a chosen medium. The sender is the person who originates the message, and the receiver is the person who receives the message.

The message is the information that is being conveyed from the sender to the receiver.The communication process consists of several elements. These include the sender, the message, the medium, the receiver, and feedback. The sender must encode the message in a way that the receiver can understand it.

The medium is the pathway through which the message is transmitted, and it can be verbal, nonverbal, written, or electronic. The receiver must decode the message and provide feedback to the sender.The medium used in communication can greatly impact the effectiveness of the message.

For example, a face-to-face conversation may be more effective in conveying emotions and nonverbal cues, while a written message may be more effective in conveying complex information that requires time for processing.

Learn more about communication process here:

https://brainly.com/question/28615316

#SPJ11

Computer programmers often acknowledge the fact that computers cannot inherently distinguish between good and bad data. It is a well-known principle in programming that computers operate based on the instructions provided to them, and they process data as per those instructions without the ability to independently determine the quality or validity of the data.

Programmers recognize the importance of implementing robust data validation and error-handling mechanisms within their software to ensure that only valid and expected data is processed. They understand that it is their responsibility to define criteria, rules, and checks to identify and handle erroneous or inappropriate data.

Furthermore, programmers emphasize the significance of data quality assurance and testing procedures to validate the correctness and integrity of data inputs. By thoroughly testing their code and employing techniques like input validation, data sanitization, and error detection, programmers strive to mitigate the risks associated with handling potentially flawed or malicious data.

In summary, computer programmers are aware of the limitations of computers in discerning good and bad data and take necessary precautions to ensure data quality and integrity through effective validation and testing processes.

learn more about "programmers ":-https://brainly.com/question/23275071

#SPJ11

This is a true statement. Public encryption systems use a pair of keys: a secret key and a public key.

The secret key is kept private by the owner and is used to decrypt messages that are encrypted with the public key. The public key, on the other hand, is freely distributed and is used to encrypt messages that can only be decrypted with the secret key. This system ensures that only the intended recipient can decrypt and read the message. Public key cryptography has become increasingly important for secure online communication, such as online banking and e-commerce, as well as for secure messaging and email communication. The use of public encryption systems has revolutionized the way we communicate and has made it possible to share sensitive information safely and securely over the internet.

To know more about encryption systems visit:

https://brainly.com/question/31492692

#SPJ11

To determine which functional dependencies in the set are redundant, we can apply the Armstrong's axioms to check if any of the functional dependencies can be inferred from the others.

The three axioms of Armstrong's are:

1. Reflexivity: if Y is a subset of X, then X → Y

2. Augmentation: if X → Y, then XZ → YZ

3. Transitivity: if X → Y and Y → Z, then X → Z

Using these axioms, we can derive additional functional dependencies that are not explicitly given in the set.

Starting with the given set of functional dependencies:

```

cf→b

b→c

fb→e

cbe→f

e→ag

fa→b

bg→fe

ba→cg

```

We can apply augmentation to the first dependency to get `cfb → b` and then apply transitivity to the second dependency to get `cfb → c`.

Similarly, we can apply transitivity to the third dependency to get `cfb → e` and then apply transitivity to the fourth dependency to get `cfb → f`.

This gives us a new set of functional dependencies:

```

cf→b

b→c

fb→e

cbe→f

e→ag

fa→b

bg→fe

ba→cg

cfb→b

cfb→c

cfb→e

cfb→f

```

Now, we can check each of the answer choices to see if they can be inferred from this new set of functional dependencies:

a) `E→G`: This cannot be inferred from the given set of functional dependencies or the new set that we derived. Therefore, this is not redundant.

b) `FB→E`: This can be inferred from the given set of functional dependencies by applying transitivity to the third and eighth dependencies: `fb→e` and `bg→fe`, which gives us `fbg→e`. Since `fbg` is a superset of `fb`, we can apply reflexivity to get `fb→e`. Therefore, this is not redundant.

c) `BA→G`: This can be inferred from the given set of functional dependencies by applying transitivity to the fifth and last dependencies: `e→ag` and `ba→cg`, which gives us `ba→g`. Therefore, this is redundant.

d) `BE→F`: This cannot be inferred from the given set of functional dependencies or the new set that we derived. Therefore, this is not redundant.

Therefore, the answer is (c) `BA→G` is the redundant functional dependency.

For more details regarding redundancy, visit:

https://brainly.com/question/13266841

#SPJ1

The base class access specification determines how inherited members in the base class may be accessed by derived classes.

In object-oriented programming, a base class (also known as a superclass or parent class) is a class that serves as the foundation for derived classes (also known as subclasses or child classes). The base class can define various members, such as variables, methods, and properties.

The access specification in the base class determines the visibility and accessibility of these members when they are inherited by derived classes. It specifies the level of access that derived classes have to the members inherited from the base class.

There are typically three access specifiers used in most object-oriented programming languages: public, protected, and private.

By specifying the appropriate access specification for the base class members, developers can control how derived classes interact with and modify inherited members, ensuring encapsulation, data hiding, and proper abstraction in object-oriented programming.

Learn more about Programming languages: https://brainly.com/question/16936315

#SPJ11

To extract a range of bits from bit 5 to bit 3 on a 10-bit unsigned number using the expression (x << a) >> b, you should set a = 6 and b = 7. This will shift the bits to the left by 6 positions, then shift them back to the right by 7 positions, effectively isolating bits 5 to 3.

To extract a range of bits from an unsigned number, we need to shift the bits to the right and then perform a bitwise AND operation with a mask that has ones in the positions of the bits we want to extract. In this case, we want to extract bits 5 to 3, which means we need to shift the bits to the left by 6 positions (a = 6) so that bits 5 to 3 are in positions 9 to 7. Then, we shift the bits back to the right by 7 positions (b = 7) to isolate the bits we want. Finally, we can apply a bitwise AND operation with the mask 0b111 to extract the desired bits.

Learn more about bits here;

https://brainly.com/question/30791648

#SPJ11

Language of strings with x's and y's such that each pair of x's have at least one y between them.

The language consists of all strings over the alphabet {x, y} where the elements in every pair of x's are separated by at least one y.

In other words, any string in this language has at least one y between every two consecutive x's.

For example, xyxyyxy would be in the language, but xyxyxy would not be since there is no y between the second and third x.

This language can be described by the regular expression (yxy)*, which means zero or more y's followed by an x followed by zero or more y's, repeated zero or more times.

It can also be recognized by a deterministic finite automaton with two states, one for processing x's and one for processing y's.

For more such questions on Strings:

https://brainly.com/question/20813205

#SPJ11

The statement given "the private keyword is required in a function procedure declaration." is false because the private keyword is not required in a function procedure declaration.

In programming languages such as C++, C#, and Java, the private keyword is used to specify that a function or method is accessible only within the same class or object and not from outside. However, in some other programming languages like Python, the private keyword is not explicitly used for function or method declarations.

In Python, for example, the concept of privacy is achieved through naming conventions rather than keywords. By convention, a function or method whose name starts with an underscore (_) is considered private and should not be accessed directly from outside the class or module.

""

Question is :

the private keyword is required in a function procedure declaration. true or false

""

You can learn more about programming languages at

https://brainly.com/question/16936315

#SPJ11

The internal fragmentation for this process is 246 bytes.

Internal fragmentation occurs when the allocated memory space is larger than the actual amount of data that needs to be stored.

In this scenario, we have a page size of 2,048 bytes and a process size of 72,766 bytes.

To calculate the internal fragmentation, we need to first determine how many pages are needed to store the entire process.

We can do this by dividing the process size by the page size:

72,766 bytes / 2,048 bytes = 35.5 pages

Since we cannot have partial pages, we need to round up to the nearest whole number, which means we need 36 pages to store the entire process.

However, since the process size is not an exact multiple of the page size, the last page will not be fully utilized and there will be internal fragmentation.

To calculate this, we need to determine the amount of space that is unused on the last page:

2,048 bytes - (72,766 bytes mod 2,048 bytes) = 246 bytes

Therefore, the internal fragmentation for this process is 246 bytes.

In summary, internal fragmentation occurs when the allocated memory space is larger than the actual amount of data that needs to be stored. In this scenario, we have calculated that the internal fragmentation for a process size of 72,766 bytes with a page size of 2,048 bytes is 246 bytes.

know more about internal fragmentation here:

https://brainly.com/question/30047126

#SPJ11

A table that is in 1NF and contains no partial dependencies is said to be in 2NF.

2NF stands for Second Normal Form, which is a higher level of normalization in database design. In 1NF (First Normal Form), a table is required to have atomic values, meaning that each column should contain only indivisible data. Additionally, 1NF tables do not allow repeating groups. To achieve 2NF, a table must first meet the requirements of 1NF. In addition to that, 2NF eliminates partial dependencies, which occur when a non-key attribute depends on only part of the primary key. By removing partial dependencies, the table is further normalized and organized more efficiently. Therefore, a table in 1NF that contains no partial dependencies is said to be in 2NF, ensuring better data integrity and reducing redundancy in the database.

Learn more about  partial dependencies here: brainly.com/question/31539754

#SPJ11

If the total cost function is increasing at a decreasing rate, the corresponding MPL (Marginal Product of Labor) and MC (Marginal Cost) functions are: b. MPL is downward sloping; MC is upward sloping.

When the total cost function is increasing at a decreasing rate, it means that each additional unit of labor is adding less to the total cost compared to the previous unit. This implies that the MPL function, which measures the additional output produced by each additional unit of labor, is decreasing as the quantity of labor increases. This is because the law of diminishing marginal returns states that, as more units of a variable input (such as labor) are added to a fixed input (such as capital), the marginal product of the variable input will eventually decrease. As a result, the MPL curve is downward sloping.

Learn more about Marginal Cost here;

https://brainly.com/question/7781429

#SPJ11

The correct statement regarding Discrete MultiTone (DMT) is c.

DMT describes the use of OFDM to enable ADSL. DMT is a modulation technique used in Asymmetric Digital Subscriber Line (ADSL) technology, which is used to provide high-speed internet access over existing copper telephone lines. DMT uses Orthogonal Frequency Division Multiplexing (OFDM) to divide the available bandwidth into multiple channels or tones, each carrying data at different frequencies. This enables more efficient use of the available bandwidth and reduces interference between channels. Option a is incorrect because DMT is not specifically used for wireless BWA, but rather for wired broadband access. Option b is incorrect because DMT is not used for coaxial cable networks, but rather for telephone lines. Option d is also incorrect as only option c is correct.

To know more about statement visit:

https://brainly.com/question/2285414

#SPJ11

The GSM network uses a unique identifier called the International Mobile Equipment Identity (IMEI) to identify valid devices.

This 15-digit code is stored in the device's firmware and is used by the network to authenticate the device and ensure that it is allowed to access the network. Additionally, the IMEI can be used to stop stolen phones from accessing the network by adding the IMEI to a blacklist database maintained by the network operator. This database is regularly updated with stolen IMEIs, and any device with a blacklisted IMEI is denied access to the network, making it useless for the thief. Therefore, the IMEI is a crucial tool for ensuring the security of the network and preventing the use of stolen devices.

learn more about GSM network here:

https://brainly.com/question/28068082

#SPJ11

A typical IPv6 address has the following format: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx. In this format, each 'x' represents a hexadecimal digit, which can range from 0-9 and A-F. There are 8 groups of 4 hexadecimal digits, separated by colons, making up a total of 128 bits in an IPv6 address.

An IPv6 address is structured in the format xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx, where each 'x' represents a hexadecimal digit ranging from 0 to 9 and A to F. The address consists of 8 groups, each comprising 4 hexadecimal digits, separated by colons. In total, an IPv6 address is made up of 128 bits, providing a much larger address space compared to the 32-bit IPv4 addresses. This expanded addressing scheme allows for a virtually limitless number of unique addresses, accommodating the growing demand for connected devices and ensuring the continued growth of the internet.

Learn more about IPv6 address: https://brainly.com/question/31103106

#SPJ11

Today, the backbone of the internet is composed of numerous internet exchange points around the world.

These exchange points are physical locations where internet service providers (ISPs), content providers, and other network operators connect their networks to exchange internet traffic. The largest exchange points, such as those in New York, London, and Frankfurt, can handle traffic in excess of 5 terabits per second. The exchange of traffic at these points allows data to flow more efficiently and helps to prevent congestion. The backbone of the internet is critical to the functioning of the modern world, enabling communication, commerce, and information exchange on a global scale.

learn more about internet here:

https://brainly.com/question/13308791

#SPJ11

The given statement "calculations are performed from right to left, working toward the equal sign" is False because calculations are not performed from right to left, working toward the equal sign.

In fact, calculations are performed from left to right, following the order of operations or the PEMDAS rule. This Pemdas rule stands for Parentheses, Exponents, Multiplication, Division (from left to right), and Addition and Subtraction (from left to right). The order of operations is important in mathematical calculations to ensure consistency and accuracy in the results. If calculations were performed from right to left, it could lead to confusion and incorrect answers.

For example, in the expression 6 + 2 x 3, if we were to perform the calculation from right to left, we would do 2 x 3 first, which would give us 6. Then, we would add 6 and 6, which would give us 12. However, the correct answer is 12, as we need to perform multiplication before addition. Therefore, it is important to remember that calculations are performed from left to right, following the order of operations. This helps to ensure accuracy in mathematical calculations and prevents confusion in the results.

know more about PEMDAS rule here:

https://brainly.com/question/21202959

#SPJ11

If I have decided to create a list of all the words for names, events, and ideas that exist in the Palauan language, then I am creating a vocabulary.

A vocabulary is a collection of words known to a person or group of people, or words used in a particular language or field of study. In this case, the focus is on the Palauan language and the words used for names, events, and ideas. The Palauan language is a language spoken in Palau, a small island country in the western Pacific Ocean. It is a member of the Austronesian language family and has around 20,000 speakers. Creating a vocabulary of the Palauan language can help people learn more about the language, culture, and history of Palau. It can also serve as a resource for those who want to study the language or use it in their work or research. Therefore, if I am creating a list of all the words for names, events, and ideas that exist in the Palauan language, then I am creating a Palauan vocabulary.

Learn more about Palauan language here:

https://brainly.com/question/28495202

#SPJ11

The suitable data structure for modeling a card deck where cards are taken from the top and returned to the bottom would be a queue.

For an invoice containing a collection of purchased items, a list would be a suitable implementation. This is because a list allows for duplicate items and maintains the order of insertion. In an invoice, multiple items can have the same product but different quantities or details, and the order in which they were added is significant.

For managing an appointment calendar, a priority queue would be a suitable choice. This is because appointments may have different priorities (e.g., urgent appointments) and need to be scheduled based on their priority level. A priority queue allows for efficient retrieval of the highest priority appointment.

For modeling a card deck where cards are taken from the top and returned to the bottom, a queue would be the appropriate choice. This is because a queue follows the First-In-First-Out (FIFO) principle, mimicking the behavior of taking cards from the top and returning them to the bottom in a sequential order.

Learn more about modeling

brainly.com/question/30519560

#SPJ11

False

A Sub procedure does not return a value to the calling code. You call it explicitly with a stand-alone calling statement. You cannot call it by simply using its name within an expression.

Yes, you can use specific iptables rules to help prevent Denial of Service (DoS) attacks.

Here are a few iptables rules you can consider implementing to mitigate DoS attacks:

1. Limiting Connection Rates:

  ```shell

  iptables -A INPUT -p tcp --syn --dport <port> -m connlimit --connlimit-above <limit> -j DROP

  ```

This rule limits the number of incoming TCP connections to a specific port (`<port>`) from a single IP address to `<limit>`. If the connection rate exceeds the limit, the rule will drop the packets.

2. Setting Connection Tracking:

  ```shell

  iptables -A INPUT -m conntrack --ctstate NEW -p tcp --dport <port> -m limit --limit <limit/s> -j ACCEPT

  ```

  This rule limits the rate of incoming TCP connections to a specific port (`<port>`) by accepting only a certain number of connections per second (`<limit/s>`). Excess connections beyond the limit will be dropped.

3. SYN Flood Protection:

  ```shell

  iptables -A INPUT -p tcp --syn --dport <port> -m connlimit --connlimit-above <limit> --connlimit-mask 32 -j DROP

  ```

This rule prevents SYN flood attacks by limiting the number of simultaneous half-open connections (`--syn`) to a specific port (`<port>`) from a single IP address to `<limit>`. It drops excess connection requests.

4. ICMP Rate Limiting:

  ```shell

  iptables -A INPUT -p icmp --icmp-type echo-request -m limit --limit <limit/s> -j ACCEPT

  ```

  This rule limits the rate of incoming ICMP (ping) requests by accepting only a certain number of requests per second (`<limit/s>`). Excess ICMP requests beyond the limit will be dropped.

These are just a few examples, and the effectiveness of the rules may vary depending on your specific network environment and the type of DoS attacks you are facing. It's important to evaluate your network requirements and consider additional security measures, such as rate limiting, traffic monitoring, or using specialized DoS protection solutions.

Learn more about IP address :

https://brainly.com/question/31171474

#SPJ11

To improve the query performance of the given SQL, we need to choose the best index for the query. The query is joining three tables: Student, Enroll, and Course.

The conditions in the WHERE clause are filtering the data based on zno, age, and cno. Therefore, we need to choose an index that covers these columns.

Know more about the WHERE clause

https://brainly.com/question/30356875

#SPJ11

If the StringTokenizer class's constructor is called with a reference to a string object as the only argument, all of the following options (A. tab, B. newline, C. space) are used as delimiters. Option D is the correct answer.

The StringTokenizer class in Java is used to break a string into tokens based on specified delimiters. When the constructor of the StringTokenizer class is called with a string object as the argument, the delimiters determine how the string will be divided into separate tokens. In this case, if a reference to a string object is passed as the only argument to the constructor, all of the given options (tab, newline, and space) will be used as delimiters. This means that any occurrence of a tab, newline, or space character will cause the string to be split into separate tokens.

Option D is the correct answer.

You can learn more about constructor at

https://brainly.com/question/13267121

#SPJ11