To get the 10% discount, a shopper must spend at least $400.
Use d to represent the spending (in dollars) of a shopper who gets the discount.

Answer:

Step-by-step explanation:

If the circumference and area of a circle are numerically equal, then we can write the following equation:

C = A

where C is the circumference and A is the area of the circle.

Using the formulas for the circumference and area of a circle, we can substitute and simplify the equation as follows:

2πr = πr^2

Dividing both sides by πr gives:

2 = r

Therefore, if the circumference and area of a circle are numerically equal, then the radius is numerically equal to 2.

Therefore, the area of the whole figure is 60170 square centimeters.

Area is a measurement of the amount of space inside a 2-dimensional shape, such as a rectangle, triangle, circle, or any other polygon. It is usually measured in square units, such as square inches, square feet, square meters, etc. The formula for finding the area of a shape depends on the type of shape. For example, the area of a rectangle is calculated by multiplying its length by its width, while the area of a circle is calculated by multiplying the square of its radius by pi (3.14).

Here,

To find the area of the whole figure, we need to find the area of the triangle and the area of the rectangle, and then add them together.

The area of the triangle can be found using the formula:

Area of triangle = (1/2) x base x height

where base is the length of one side of the triangle (2 cm) and height is the altitude (1.7 m). We need to convert the altitude to centimeters to match the units of the base:

1.7 m = 170 cm

So, the area of the triangle is:

Area of triangle = (1/2) x 2 cm x 170 cm = 170 cm²

The area of the rectangle is simply:

Area of rectangle = length x width = 2 m x 3 m = 6 m²

Now, we can add the two areas together to get the total area of the figure:

Total area = Area of triangle + Area of rectangle

= 170 cm² + 6 m²

Since the units are different, we need to convert one of them to match the other. Let's convert the area of the rectangle from meters to centimeters:

6 m² = 60000 cm²

Now, we can add the two areas together:

Total area = 170 cm² + 60000 cm²

= 60170 cm²

To know more about area,

https://brainly.com/question/13194650

#SPJ1

Answer:

The following statements about Josiah's solution are true:

He found the proportion of rock songs to the total number of songs correctly: StartFraction 10 over 20 EndFraction = StartFraction x over 1,500 EndFraction.

He solved the proportion correctly: StartFraction 10 times 30 over 20 times 30 EndFraction = StartFraction x over 1,500 EndFraction.

He correctly determined that the number of rock songs on his MP3 player is 300 (x = 300).

Therefore, the statements that are true are:

He found the proportion of rock songs to the total number of songs correctly.

He solved the proportion correctly.

He correctly determined that the number of rock songs on his MP3 player is 300 (x = 300).

The loan's interest rate, which is [tex]0.475[/tex] percent or [tex]4.75[/tex]%, is imposed by Andrea.

An interest rate provides information on how costly lending is or how profitable saving is. Hence, if you are a borrower, an interest rate refers to the total you pay for borrowing money and is expressed as a proportion of the total loan amount.

Borrowing money is more expensive when rates of interest are elevated and less expensive when rates of interest are low. Be sure you fully understand how the rate of interest will impact the entire amount you have to pay before accepting a loan.

maturity value [tex]=[/tex] principal [tex]+[/tex] (principal [tex]*[/tex] interest rate [tex]*[/tex] time)

maturity value [tex]= 34,275[/tex]

principal [tex]= 30,000[/tex]

time [tex]= 3[/tex] years

So we have:

[tex]34,275 = 30,000 + (30,000 * interest rate * 3)[/tex]

Simplifying this equation, we get:

[tex]34,275 - 30,000 = 9,000 *[/tex] interest rate

[tex]4,275 = 9,000[/tex] [tex]*[/tex] interest rate

interest rate [tex]= 4,275 / 9,000[/tex]

interest rate [tex]= 0.475[/tex]

Therefore, the interest rate charged on the loan is [tex]0.475[/tex] or [tex]4.75[/tex]%.

To know more about interest rate visit:

https://brainly.com/question/14120268

#SPJ1

It sounds like you want to find how many diagonals a nonagon has.

A nonagon has n = 9 sides.

The number of diagonals would be...

[tex]d = \text{number of diagonals}\\\\d = \frac{n(n-3)}{2}\\\\d = \frac{9(9-3)}{2}\\\\d = \frac{9(6)}{2}\\\\d = \frac{54}{2}\\\\d = 27\\\\[/tex]

A nonagon has 27 different diagonals.

One Imaginary solution is not possible for a quadratic equation of the form ax² + bx + c = 0.

By replacing the factorization method, the quadratic formula aids in evaluating the quadratic equations' solutions.

A quadratic equation has the general form ax² + bx + c = 0, where a, b, and c are real numbers, sometimes known as "numeric coefficient".

We can forecast the nature of the roots by determining the discriminant's value.

Three potential outcomes, each with a different impact

If b² - 4ac > 0, two separate roots that are real.

If b² - 4ac = 0, two real roots have magnitudes that are equal.

If b² - 4ac 0, there are no real roots and just imaginary ones.

Thus, the quadratic equation ax² + b x + c = 0 cannot have a single imaginary solution.

To know more about roots of quadratic equation, visit,

https://brainly.com/question/25841119

#SPJ4

Answer:

Exponents are a mathematical notation used to represent repeated multiplication. An exponent, also known as a power, consists of a base number and a small superscript number, which indicates how many times the base number should be multiplied by itself.

For example, in the expression 2^3, the base number is 2 and the exponent (or power) is 3. This means that 2 should be multiplied by itself three times: 2 x 2 x 2 = 8. So, 2^3 is equal to 8.

Exponents can also be negative or fractions. In these cases, the negative exponent indicates division and the fraction exponent indicates taking a root.

For instance, in the expression 2^-3, the negative exponent means that 2 is in the denominator of a fraction: 1/2 x 1/2 x 1/2 = 1/8. So, 2^-3 is equal to 1/8.

In the expression 4^(1/2), the fraction exponent means that we take the square root of 4: 2 x 2 = 4. So, 4^(1/2) is equal to 2.

Exponents have many practical applications in science, engineering, and other fields. They can be used to represent large or small quantities, as well as to simplify complex mathematical expressions.

Step-by-step explanation:

a.

There are 15,504 ways to choose 20 batteries from the given types.

b.

there are 18,564 ways to choose 20 batteries such that at least four of them are 9-volt batteries.

To choose 20 batteries from the given 5 types (aaa, aa, c, d, and 9-volt), we can use the combination formula and is given by:

nCr = n! / (r! * (n-r)!)

5C20 = 5! / (20! * (5-20)!) = 15,504

there are 15,504 ways to choose 20 batteries from the given types.

b. To choose 20 batteries such that at least four of them are 9-volt batteries, we employ the method:

First, we choose four 9-volt batteries out of the total number of 9-volt batteries, which is 1.

we then need to choose the remaining 16 batteries from the remaining 4 types (aaa, aa, c, and d), while making sure that we don't choose any 9-volt batteries.

Applying the combination formula, with n = 4 and r = 16:

4C16 = 4! / (16! * (4-16)!) = 18,564

Therefore, the total number of ways to choose 20 batteries such that at least four of them are 9-volt batteries is:

1 * 18,564 = 18,564

Learn more about combination formula at:

https://brainly.com/question/11732255

#SPJ1

No, it does not necessarily imply that any random variable X defined from S will have an infinite set of possible values.

For instance, consider a random variable X that takes values from the set of natural numbers S = {1, 2, 3, ...}. We can define X as follows: X(n) = n for any n ∈ S.

Although S is an infinite set, X can only take values in S, which is also an infinite set, but not a larger one. Therefore, X has a countable (finite or infinite) set of possible values.

In general, the set of possible values of a random variable depends on how the variable is defined and not just on the size of the sample space.

For more questions like Variable click the link below:

https://brainly.com/question/17344045

#SPJ11

Answer:

When x = 0, y = 2^0 + 6 = 7. So the first point is (0, 7).

When x = 1, y = 2^1 + 6 = 8. So the second point is (1, 8).

When x = 2, y = 2^2 + 6 = 10. So the third point is (2, 10).

When x = -1, y = 2^-1 + 6 = 6.5. So the fourth point is (-1, 6.5).

When x = -2, y = 2^-2 + 6 = 6.25. So the fifth point is (-2, 6.25)

The expected value of cases in which juries got the right decision is 150, and the variance is 375.

1. Since 25% of defendants in the state are innocent, that means that 75% of the defendants are guilty.
2. This means that in the given year, 150 out of the 200 people put on trial will be guilty.
3. Thus, the expected value of cases in which juries got the right decision is 150.
4. The variance of the number of cases in which juries got the right decision is calculated by taking the expected value and subtracting it from the total number of people put on trial, which is 200.
5. The result of the calculation is 375, which is the variance of cases in which juries got the right decision.

See more about variance at: https://brainly.com/question/9304306

#SPJ11

The company made a profit of $770

Profit is the difference between revenue and costs. In this scenario, the revenue from selling 110 selfie sticks is $10 × 110 = $1100.

Therefore, the costs of producing the same number of selfie sticks are

110 × $3 = $330

So, the profit that Gamboa, Inc. made is

$1100 - $330 = $770.

As we can see, based on the number of selfie sticks together with their production, we managed to obtain a profit of $770.

Hence, the company made a profit of $770.

See more about profit at: https://brainly.com/question/1078746

#SPJ11

The `det(E2) of the given matrix is equal to 366`.

Given a 5 by 5 matrix E= `[11 2 -1 -3 4;10 -1 -2 -1 -2;-1 2 3 2 1;1 1 1 -1 -1;2 -1 -2 1 1]`.

To find `det(E)`, we can use the following steps.

Step 1: Create a 5 by 5 matrix E1 by adding a multiple of the ith row to the jth row, given i = 3 and j = 5.

We need to add -1/3 times the 3rd row to the 5th row. It can be done by the following operation.`E1 = E` (start with the original matrix) `=> E1(5,:) = E(5,:) - E(3,:) / 3` (subtract the 3rd row of E divided by 3 from the 5th row of E)

This results in the matrix `E1 = [11 2 -1 -3 4;10 -1 -2 -1 -2;-1 2 3 2 1;1 1 1 -1 -1;1/3 -7/3 -7/3 7/3 4/3]

`Step 2: Create a 5 by 5 matrix E2 by adding a multiple of the ith row to the jth row, given i = 2 and j = 5.We need to add -20 times the 2nd row to the 5th row.

It can be done by the following operation.`E2 = E1` (start with the matrix from Step 1) `=> E2(5,:) = E1(5,:) - 20 * E1(2,:)` (subtract 20 times the 2nd row of E1 from the 5th row of E1)

This results in the matrix `E2 = [11 2 -1 -3 4;10 -1 -2 -1 -2;-1 2 3 2 1;1 1 1 -1 -1;0 -13 33 -13 44]

`Step 3: Find det(E2) by using the cofactor expansion along the 5th column.`det(E2) = 0 - (-13) * A1 + 33 * A2 - (-13) * A3 + 44 * A4 - 0 * A5`where A1, A2, A3, A4, and A5 are the 2 by 2 determinants of the submatrices obtained by deleting the 5th row and the ith column, for i = 1, 2, 3, 4, and 5. We can use the following notation.

A1 = det([11 -1 -3 4;10 -2 -1 -2;-1 3 2 1;]) = 324A2 = det([11 2 -3 4;10 -1 -1 -2;-1 2 2 1;]) = -54A3 = det([11 2 -1 4;10 -1 -2 -2;-1 2 3 1;]) = -142A4 = det([11 2 -1 -3;10 -1 -2 -1;-1 2 3 2;]) = 50A5 = det([11 2 -1 -3;10 -1 -2 -1;-1 2 3 2;]) = 366.

Therefore `det(E2) = 0 - (-13) * 324 + 33 * (-54) - (-13) * (-142) + 44 * 50 - 0 * 50 = 366`.

for such more questions on determinant

https://brainly.com/question/19799535

#SPJ11

The greater number is [tex]$n^3+8$[/tex]

Let x be the greater number and y be the smaller number. We know that x-y=8.

We are also given that the smaller number is n³.

So we can set up the equation:

x = y + 8

x = n³ + 8

Therefore, the greater number is [tex]$n^3+8$[/tex].

The greater number is given as n³ + 8. If the smaller number we get is represented by the n³,  then by adding 8 to that value gives the greater number. The difference between the two numbers is always going to be 8, regardless of the value of n.

Learn more about numbers

https://brainly.com/question/25734188

#SPJ4

In response to the stated question, we may state that As a result, the function student will have to pay off the debt in 24 weeks.

In mathematics, a function is a connection between two sets of numbers in which each member of the first set (known as the domain) corresponds to a single element in the second set (called the range). In other words, a function takes inputs from one set and produces outputs from another. Inputs are commonly represented by the variable x, whereas outputs are represented by the variable y. A function can be described using an equation or a graph. The equation y = 2x + 1 represents a linear function in which each value of x yields a distinct value of y.v

a. Let L(w) be the monetary amount owing after w weeks.

Because the starting amount owing is $360 and the weekly payment is $15, the equation for the amount owed as a function of time is: L(w) = 360 - 15w

b. The inverse function of L(w) reflects the number of weeks required to repay a certain loan amount. In terms of L, we can solve for w:

L = 360 - 15w

L - 360 = -15w

w = (360 - L)/15

As a result, the inverse function is: L(-1)(w) = (360 - w)/15.

c. 0 = 360 - 15w

15w = 360 = 24

As a result, the student will have to pay off the debt in 24 weeks.

To know more about function visit:

https://brainly.com/question/28193995

#SPJ1

As a result, the triangles and are similar triangles according to the meaning of similarity. Thus, the Angle-Angle Similarity Principle has been demonstrated.

Three straight edges and three angles make up a closed, two-dimensional triangle. By joining three non-collinear lines, it is created. One of the most fundamental geometric shapes, triangles are used in many disciplines, including physics, engineering, and construction. According to their edges and angles, triangles can be classified as equilateral, isosceles, scalene, acute, obtuse, or right triangles.

given

Take into account two triangles Z and T such that ZT ZX and ZUZY. We must demonstrate the similarity of these two shapes.

We are aware that if two triangles are similar, their respective sides and angles will be proportional.

Now, let's prove that the respective sides of these two triangles are proportional. Since ZT ZX, the respective sides of similar triangles result in TZ/ZX = TU/ZY. If we simplify this number, we obtain:

TU/ZX Equals TZ/ZY.

This demonstrates that the ratio between the respective sides of these two triangles.

As a result, the triangles and are similar triangles according to the meaning of similarity. Thus, the Angle-Angle Similarity Principle has been demonstrated.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

The complete question is :- Write a proof of the Angle-Angle Similarity Theorem.

If two angles of one triangle are congruent to two angles of another triangle, then the triangles are similar.

Given: ZT ZX, ZUZY

Prove: Δτυν - ΔΧΥΖ

Dilate XYZ by the scale factor

Net rendering is a method of rendering a computer-generated animation or image on multiple computers over a network.

Net rendering is a method of rendering a computer-generated animation or image on multiple computers over a network. This technique allows a user to take advantage of the computing power of multiple computers to render a scene. To do this, the user would divide the scene into several parts, assigning each part to a different computer. The computers would then render each part of the scene independently, and then the results are combined into a single image. This process can significantly reduce the time required to render a scene, as the workload is distributed over multiple computers. For example, if it would normally take a single computer 10 minutes to render a scene, net rendering could reduce that time to 2 minutes.

Learn more about significantly here:

https://brainly.com/question/14789537

#SPJ1

The product of the two expressions can be simplified to -1/2(y-1).

Let's first focus on the expression 27y/(y²-1). This expression has a denominator that is a difference of squares, which we can factor as (y+1)x(y-1). We can then use partial fraction decomposition to rewrite the expression as follows:

27y/(y²-1) = (A/(y+1)) + (B/(y-1))

Multiplying both sides by (y+1)x(y-1), we get:

27y = Ax(y-1) + Bx(y+1)

We can then solve for A and B by setting y = 1 and y = -1, respectively. This gives us:

A = -9 B = 9

Substituting these values back into our partial fraction decomposition, we get:

27y/(y²-1) = (-9/(y+1)) + (9/(y-1))

Now let's focus on the expression (y²+y)/(36y²). We can factor out a y from the numerator and denominator to get:

y(y+1)/(36yxy)

We can then simplify this expression by cancelling out the y's:

(y+1)/36

Now that we have simplified each expression separately, we can multiply them together.

(27y/(y²-1)) x ((y²+y)/(36y²)) = ((-9/(y+1)) + (9/(y-1))) x ((y+1)/36)

We can distribute the second expression and simplify:

=> ((-9y)/(y+1) + (9y)/(y-1)) x ((y+1)/36) = ((-9y)(y-1) + (9y)(y+1)) / (36x(y²-1))

=> (-9y² + 9y - 9y² - 9y) / (36x(y²-1)) = (-18y² - 18y) / (36x(y²-1))

=> (-1/2)x(y+1)/(y-1)(y+1) = -1/2(y-1)

To know more about expression here

https://brainly.com/question/14083225

#SPJ4

The sample size cannot be determined from this information alone. A confidence interval for a population mean is calculated based on the mean of a sample, the sample size, and the standard deviation.

Deviation is the difference between the expected value or average of a set of data and the actual value. For example, if the average of a set of numbers is 10 and one of the numbers is 15, the deviation of that number is 5. Deviation is a measure of how much variation exists in a set of data. It is an important tool used to measure the accuracy of a data set and identify outliers within that data set. Deviation is also used to measure the volatility of a stock or other investment, which is a measure of how much its price changes over time.

Therefore, to determine the sample size, the mean, standard deviation, and confidence interval of the sample must all be known.

To learn more about deviation

https://brainly.com/question/12402189

#SPJ1

The sample size cannot be determined from this information alone. A confidence interval for a population mean is calculated based on the mean of a sample, the sample size, and the standard deviation.

Deviation is the difference between the expected value or average of a set of data and the actual value. For example, if the average of a set of numbers is 10 and one of the numbers is 15, the deviation of that number is 5. Deviation is a measure of how much variation exists in a set of data. It is an important tool used to measure the accuracy of a data set and identify outliers within that data set. Deviation is also used to measure the volatility of a stock or other investment, which is a measure of how much its price changes over time.

Therefore, to determine the sample size, the mean, standard deviation, and confidence interval of the sample must all be known.

To learn more about deviation
brainly.com/question/12402189
#SPJ1

Complete Question:
A 95% confidence interval for a population mean was reported to be 152 to 160. If s 15, what sample size was used in this study?

Answer: 5 ≥ y-2 is equivalent to y ≤ 7.

Step-by-step explanation: To check if 5 is greater than or equal to y-2, we need to isolate the variable y on one side of the inequality sign.

5 ≥ y - 2

First, we can add 2 to both sides to get rid of the subtraction of 2 on the right side:

5 + 2 ≥ y - 2 + 2

7 ≥ y

Therefore, we can see that y is less than or equal to 7 for this inequality to hold true.

Increasing lexicographic order: (0, 0), (0, 1/2), (1/4, 0), (1/4, 1/2)).Thus, the increasing lexicographic order of the critical points of the function f(x,y) = xy(1 - 4x - 2y) are (0, 0), (0, 1/2), (1/4, 0), and (1/4, 1/2).

lexicographic order: (0, 0), (0, 1/2), (1/4, 0), (1/4, 1/2)).Thus, the increasing lexicographic order of the critical points of the function f(x,y) = xy(1 - 4x - 2y) are (0, 0), (0, 1/2), (1/4, 0), and (1/4, 1/2).

Suppose that f(x,y) = xy(1 - 4x - 2y). f(x,y) has 4 critical points.

Let's discuss what are critical points and how we can determine them,A critical point is a point on the graph where the derivative changes its sign.

In other words, the derivative either changes from negative to positive or from positive to negative. A critical point is also known as a stationary point or a turning point

To determine the critical points, we need to find the derivative of the given function and set it equal to zero.The given function is[tex]f(x,y) = xy(1 - 4x - 2y).[/tex]

Let's find the partial derivative of f with respect to [tex]x:f_x(x,y) = y(1 - 4x - 2y) - 4xy = (1-2y)(1-4x)y.[/tex] (1)

Now, find the partial derivative of f with respect to y:f_y(x,y) = x(1 - 4x - 2y) - 2xy = (1-2x)(1-2y)x. (2)

To find the critical points, we need to set both partial derivatives (1) and (2) equal to zero.

(1-2y)(1-4x) = 0 and (1-2x)(1-2y) = 0.

Solving both equations separately, we have the following critical points:(1/4, 1/2), (1/4, 0), (0, 1/2), and (0, 0).

for such more questions on lexicographic order

https://brainly.com/question/22852607

#SPJ11

The equation of the required line in slope-intercept form is y = -1/4x + 8.

Here are the steps to find the equation of the line:

Step 1: Find the slope of the given line in slope-intercept form

y = mx + c

-4x + y = 43 ⇒ y = 4x + 43... (1)

Here, the slope (m1) of the given line is 4.

Step 2: Find the slope of the required line as the two lines are perpendicular to each other.

m1 × m2 = -1

[As the given line and the required line are perpendicular to each other]

4 × m2 = -1 ⇒ m2 = -1/4

So, the slope (m2) of the required line is -1/4.

Step 3: Write the equation of the required line in point-slope form.

y - y1 = m(x - x1)

[Using the point-slope formula]

Let (x1, y1) = (-8, 10)m = -1/4

Putting the values in the above formula, we get

y - 10 = -1/4(x - (-8)) ⇒ y - 10 = -1/4(x + 8)... (2)

Step 4: Simplify the above equation to get the required equation of the line in slope-intercept form.

y - 10 = -1/4x - 2 ⇒ y = -1/4x + 8... (3)

You can learn more about slope and intercept at: brainly.com/question/30216543

#SPJ11

Answer: 2 solutions

Step-by-step explanation:

To find the angle of a regular polygon, use the formula 180(n-2)/n (where n is the amount of sides.)

Setting them equal, we get (180n-360)/n = 1680.

Multiplying by n on both sides, we get 180n-360 = 1680n.

Solving, we get 1500n = 360.

n = 0.24, which means it is not a shape, as you cannot have a shape with 0.24 sides.

The other way to look at it is to take full revolutions of 360 away from each angle, giving us 240 (the smallest remainder without it going negative). However, all the angles would be concave. If all the angles are concave, then it might connect backwards.

Subtracting 240 from 360 (to get the "exterior" angles, we get 120. Plugging it in to our equation 180(n-2)/n and solving, we get 180n-360 = 120n, and solving gives us 60n = 360, or n=6.

Since the amount of sides came together cleanly, we can classify this polygon as a normal hexagon, which has 6 sides.

The rate of change between these two points is 28/3.

A key idea in mathematics is the rate of change, which defines how quickly one variable changes in relation to another. From physics and engineering to economics and social sciences, it is used to explain a broad variety of occurrences. Calculus gives a means to calculate the instantaneous rate of change at any given moment by using the derivative of a function as the rate of change. Several practical applications, such as forecasting population increase, simulating the behaviour of a physical system, or streamlining a production process, depend on an understanding of the rate of change.

The coordinates of the point for the interval [-2, 1] is (-2, 4) and (1, 32).

The rate of change is the slope between the two points. Thus,

m = (y2 - y1) / (x2 - x1)

m = (32 - 4) / (1 - (-2)) = 28 / 3

Therefore, the rate of change between these two points is 28/3.

Learn more about rate of change here:

https://brainly.com/question/12786410

#SPJ1

Therefore, the 95% confidence interval for the population proportion of disks that are defective is (0.8357, 0.9475). This means that there is a 95% probability that the true population proportion of disks that are defective is between 0.8357 and 0.9475.

The quality-conscious disk manufacturer can use a 95% confidence interval to estimate the fraction of defective disks made by the company. The 95% confidence interval is calculated using the sample data to construct an interval estimate of the population proportion.
Using the given data, the sample proportion of disks that are not defective is 904/1015 = 0.8915.
The 95% confidence interval for the population proportion of disks that are defective is then given by:
Lower limit = 0.8915 – (1.96 x √(0.8915 x (1- 0.8915)/1015))
= 0.8915 – (1.96 x 0.0285)
= 0.8915 – 0.0558
= 0.8357
Upper limit = 0.8915 + (1.96 x √(0.8915 x (1- 0.8915)/1015))
= 0.8915 + (1.96 x 0.0285)
= 0.8915 + 0.0558
= 0.9475
For such more questions on probability

https://brainly.com/question/24756209

#SPJ11

Answer:

(a - 1)(3p - 2)

Step-by-step explanation:

3p(a - 1) - 2(a - 1) ← factor out (a - 1) from each term

= (a - 1)(3p - 2)

We are given that the SAT and ACT measure the same aptitude but use different scales. To find the equivalent ACT score for a given SAT score, we can use the conversion chart.
SAT 1100 = ACT 23
Therefore, the equivalent ACT score for a student with an SAT score of 1104 is 23.
3. If a student gets an SAT score of 1536, find the equivalent ACT score.
Solution:
To find the equivalent ACT score for a given SAT score, we can use the conversion chart.
SAT 1536 = ACT 35
Therefore, the equivalent ACT score for a student with an SAT score of 1536 is 35.
Therefore, the SAT score = 1536 and the ACT score = 35.

1. If a student gets an SAT score that is the 70th percentile, find the actual SAT score.
Solution:
We are given that SAT scores are normally distributed with a mean of 990 and a standard deviation of 201. We are asked to find the SAT score for the 70th percentile.
P( SAT score < X) = 0.70
We can use the standard normal table to find the corresponding z-score for the 70th percentile.
z = 0.52
We can use the z-score formula to find the SAT score:
z = (X - μ) / σ
0.52 = (X - 990) / 201
X = 1103.72
Therefore, the actual SAT score for the 70th percentile is 1104.
2. What would be the equivalent ACT score for this student?

for such more questions in standard normal

https://brainly.com/question/30492671

#SPJ11

The line x + y = 9 is y = -x + 6 is keeps through the point (5,1).

To find the equation of the line that passes through the point (5,1) and is parallel to the line x + y = 9, we need to first find the slope of the line x + y = 9.

Rearranging the equation in slope-intercept form, we get y = -x + 9

The slope of this line is -1, since the coefficient of x is -1.

Since the line we want to find is parallel to this line, it will have the same slope of -1.

Using the point-slope form of a line, the equation of the line passing through the point (5,1) and with a slope of -1 is: y - 1 = -1(x - 5)

Simplifying and rearranging the equation, we get:

y - 1 = -x + 5

y = -x + 6

To know more about equation of line:

https://brainly.com/question/29453867

#SPJ4