Thomas Paine once said it is only error and not truth that shrinks from inquiry. He meant that the more you inquire about something, less error and mistakes come from it, and more truth will.
What do you think Thomas Paine meant by this?It means that you can not make a problem worse by inquiring about it but you can only lessen the error within it. Thomas Paine was likely referring to the idea that truth has nothing to fear from examination or investigation, whereas error does. In other words, if a belief or idea is true, it should be able to withstand scrutiny and examination. On the other hand, if a belief is based on error, it will crumble when subject to inquiry.
To know more about Thomas Paine, refer
https://brainly.com/question/939936
#SPJ1
The suspect claims to have started a fire by putting gasoline in a glass jar, adding a wick, and lighting it. He then threw it in a house. What did the
suspect do?
A. He started the fire with a substrate control.
B. He used multiple high explosives.
He created a Molotov cocktail.
He utilized vapor concentration.
C.
D.
The suspect created a Molotov cocktail.
What is cocktail?A cocktail is an alcoholic beverage composed of two or more ingredients, usually of different categories, such as spirits, liqueurs, sweeteners, or mixers. The most popular cocktails include martinis, margaritas, daiquiris, mojitos, and cosmopolitans. Cocktails can be served as an aperitif, during a meal, or after dinner as a digestif. Cocktails are often created to suit a particular occasion or season, and can range from sweet and fruity to strong and intense.
This is a type of incendiary device typically consisting of a glass bottle filled with a flammable liquid, usually gasoline, with a wick, often made of cloth, protruding from the top. The wick is lit and the bottle is then thrown or otherwise deployed, which causes the bottle to break and the flammable liquid to spread and ignite. In this case, the suspect put gasoline in a glass jar, added a wick, lit it and then threw it in a house, creating a Molotov cocktail and starting a fire.
To know more about cocktail click-
https://brainly.com/question/29267600
#SPJ1
Balanced the equation for this reaction, and answer the questions.
___ N2 + ___ H2 ➞ ___ NH3
a) If 25. 0 g N2 and 18. 75 g H2 are used for this reaction, which reactant will be the limiting reactant? Show your
proof.
b) How much of the excess reactant will be left over?
Balanced equation: 3 N2 + 6 H2 ➞ 2 NH3. a) The limiting reactant is H2, as 18.75 g corresponds to only 3 moles, while 25.0 g N2 corresponds to 4.17 moles. b) The excess reactant is N2, with 1.17 moles remaining.
What is the concept of excess reactant and how is it related to the limiting reactant in a chemical reaction?
The concept of excess reactant refers to a reactant in a chemical reaction that is present in a greater amount than required to react with the limiting reactant. The limiting reactant is the reactant that limits the amount of product that can be formed, and its amount determines the maximum amount of product that can be produced. The amount of the other reactant(s) is referred to as the excess reactant because it is present in an amount greater than needed to react with the limiting reactant. When a reaction is carried out, the limiting reactant will be completely consumed, while the excess reactant will remain unchanged.
The amount of excess reactant can be calculated by subtracting the amount of product that was produced from the amount of the excess reactant used in the reaction.
To know more about reactant visit:
https://brainly.com/question/26283409
#SPJ4
what does penetrating power refer to?
1. Radiation's ability to emit visible spectrum light
2. how likely radiation is to escape the Sun's surface
3. radiation's ability to cause other atoms to ionize
4. how likely radiation is to pass through matter
Double bond O = 495 KJ/molsingle bond O = 146 KJ/molAn equation representing the dissociation of O2 (g) and a table of bond enthalpies are shown above. Based on the information, which of the following is the enthalpy change of dislocation of O2(g)?a) -641b) -495c) 495d) 641
The enthalpy change of dissociation of O2 (g) is 495 KJ/mol. This is the energy required to break the bond between the two oxygen atoms in a single molecule of O2 (g).
The double bond in O2 (g) has a bond enthalpy of 495 KJ/mol. This indicates that the dissociation's enthalpy change is also 495 KJ/mol. In other words, the two oxygen atoms in a single molecule of O2 must be separated using 495 KJ/mol of energy (g). As a result, the answer to the question regarding the enthalpy change of O2 dissociation is (c) 495 (g). This means that 495 kJ of energy are required to break one mole of O= bonds in O2 (g). The enthalpy change of dissociation of O2 (g) is equal to the bond enthalpy of the double bond O=, so the answer is 495 kJ/mol. This energy is released when the bond is formed during the reverse process of O2 formation from individual oxygen atoms.
learn more about enthalpy change of dislocation at:
brainly.com/question/1301642
#SPJ4
Calculate the amount of heat it would take to convert 85.0 g of water to steam
Although part of your question is missing, you might be referring to this full
question:
Calculate the heat energy required to convert completely 85.0 g of water at 50°C into steam at 100°C.
the heat energy required to convert completely 85.0 g of water at 50°C into steam at 100°C is 18037J.
Given that,
Mass m=85g
We know that,
Q1 =mcΔt
Q1 =85×4.2×(100−50)
Q1 =17850J
Now, the latent heat
Q2 =mL
Q2 =85×2.2
Q2 =187J
Now, the total heat energy required
Q=Q1 +Q2
Q=17850+187
Q=18037J
Know more about Energy.
https://brainly.com/question/2003548
nder what circumstances can energy level transitions occur? under what circumstances can energy level transitions occur? electrons can make a transition from one level to another by taking in or emitting a specific amount of energy. if too much energy is offered, the electron can make the transition, however if too little energy is offered the transition cannot occur. electrons can make a transition from one level to another by taking in or emitting a specific amount of energy. if too much or too little energy is offered, the electron cannot make the transition. electrons can make a transition from one level to another by taking in or emitting a specific amount of energy. if too little energy is offered, the electron can make the transition, however if too much energy is offered the transition cannot occur.
Electrons can make a transition from one energy level to another by absorbing or emitting a specific amount of energy.
In an atom, electrons occupy specific energy levels or orbitals, which are determined by the energy the electron has. When an external source of energy, such as light or heat, is introduced, it can excite the electrons and cause them to move to a higher energy level. This transition from one energy level to another is known as an energy level transition.
For a transition to occur, the energy of the external source must match the energy difference between the initial and final energy levels. If the energy offered is too little, it will not have enough energy to excite the electron to a higher level. On the other hand, if the energy offered is too much, it will cause the electron to gain even more energy and move to a higher level than desired. In either case, the transition cannot occur.
To know more about energy levels, visit:https://brainly.com/question/18156550
#SPJ4
An engine runs on a mixture of 0. 1 quart of oil for every 3. 5 quarts of gasoline. You make 3 quarts of the mixture. How much oil and how much gasoline do you use?.
So we can use 3.4 quarts of gasoline to make 3 quarts of the mixture. It can be calculated by using ratio of gasoline.
In the term of chemistry, a mixture generally can be defined as a material made up of two or more different chemical substances which are not chemically bonded. A mixture also can be described as the physical combination of two or more substances in which the identities are retained and are mixed in the form of solutions, suspensions and colloids.
To find out, divide the amount of oil you need by the ratio of oil to gasoline: 0.1 quart / (0.1 quart / 3.5 quarts) = 0.1 quart * (3.5 quarts / 0.1 quart) = 0.1 * 35 = 3.5 quarts of gasoline. So you use 0.1 quart of oil and 3.5 quarts of gasoline - 0.1 quart of oil = 3.4 quarts of gasoline to make 3 quarts of the mixture.
Here you can learn more about the ratio of oil to gasoline
https://brainly.com/question/4709787
#SPJ4
major species present when dissolved in water nibr2
NiBr₂ is deliquescent in nature which means it is soluble in water.
Nickel bromide is a yellow, crystalline material, mildly toxic, carcinogenic in nature. When nickel bromide comes into contact with strong acids or acid fumes it produces highly toxic and corrosive hydrogen bromide gas. When it is heated to decomposition it emits toxic bromide fumes.
The compound nickel(II) bromide is a strong electrolyte. Nickel(II) bromide is used as a effective source of the bromide ion. It is an important raw material and intermediate which is used in synthetic chemistry. NiBr₂ is soluble in water or we can say that it is deliquescent in nature.
The given question is incomplete so I have answered according to general knowledge.
Learn more about solubility in water from the link given below.
https://brainly.com/question/28204796
#SPJ4
A solution is composed of the , the substance dissolved, and the , the most plentiful substance in solution.
A solution is composed of the solute, the substance that is dissolved in the solvent, and the solvent, the most plentiful substance in the solution. The solvent is usually a liquid, but can also be a solid or a gas.
The solute is the substance that is dissolved in the solvent [1], and the amount of solute in the solution is usually much less than the amount of solvent.
The type of solvent used to dissolve a solute depends on the types of interactions that the solute and solvent molecules have with each other. For example, polar solutes are usually dissolved in polar solvents, while nonpolar solutes are usually dissolved in nonpolar solvents. The type of solvent can also affect the rate at which the solute dissolves; for example, solutes dissolve faster in hot solvents than in cold solvents.
Learn more about solute
https://brainly.com/question/25326161
#SPJ4
what is the angle of rotational symmetry in methane
The angle of rotational symmetry in methane (CH4) is 720°.
What is angle of rotational symmetry?The angle of rotation is the turning angle during rotation for a figure or object that has rotational symmetry. For instance, a square still looks the same after being rotated by 90 degrees. Consequently, a square rotates at a 90-degree angle.
This means that a methane molecule can be rotated 720° around its central carbon atom and still maintain its original appearance. The molecule has a tetrahedral shape, which allows for four equivalent positions of rotation.
Read more about methane here:
https://brainly.com/question/25649765
#SPJ1
Write the isotopic symbol for the iodine isotope with 74 neutrons.
Answer:
12753I 53 127 I
Explanation:
Hence, the isotopic symbol for iodine isotope with 74 neutrons is 12753I 53 127 I .
Hence, the isotopic symbol for iodine isotope with 74 neutrons is 12753I 53 127 I.
Isotope: what does it mean?
Isotopes are elements that belong to the same family but have different numbers of neutrons but the same number of protons. The atomic number of an element on the Periodic Table is determined by the number of protons in its nucleus.
How are isotopes identified?The total number of protons and neutrons in an isotope, or mass, is used to identify it. Isotopes are typically written in one of two ways. They both use the atom's mass, which is equal to the sum of the number of protons and neutrons.
Learn more about isotopes:
brainly.com/question/364529
#SPJ4
the element europium exists in nature as two isotopes: has a mass of 150.9196 u and has a mass of 152.9209 u.the average atomic mass of europium is 151.96 u. calculate the relative abundance of the two europium isotopes.
To calculate the relative abundance of the two europium isotopes, you need to use the following formula:
(x/100)(150.9196) + (y/100)(152.9209) = 151.96.
Solving for x and y, you get x = 24.4 and y = 75.6. This means that 24.4% of europium in nature is the isotope 151Eu and 75.6% is the isotope 153Eu.
The two isotopes of europium found in nature are important because they have different properties and can be used for different purposes. The isotope 151Eu is used in medical imaging and cancer detection, while the isotope 153Eu is used in nuclear reactor shielding and neutron capture.
Learn more about isotopes
https://brainly.com/question/364529
#SPJ4
determine the ionization states of aspartic acid at each pH. The pK, of the amine is 9.6, while the pk, of the carboxylic acid is 1.88 and the pK, of the carboxylic acid in the side chain is 3.65.
The ionization states of aspartic acid at different pH can be determined by using the pKa values of the amine, carboxylic acid, and carboxylic acid in the side chain.
At pH less than 1.88, the carboxylic acid group is fully protonated and the molecule is in its neutral form.
At pH between 1.88 and 3.65, the carboxylic acid group deprotonates, forming the corresponding carboxylate ion and the molecule becomes negatively charged. At the same time, the side chain carboxylic acid group is protonated.
At pH between 3.65 and 9.6, both the carboxylic acid group and the side chain carboxylic acid group are deprotonated, resulting in two negatively charged carboxylate ions.
At pH greater than 9.6, the amine group becomes deprotonated and the molecule is in its neutral form with two negatively charged carboxylate ions.
These ionization states are dynamic and will change with changes in pH.
Learn more about ionization states here: brainly.com/question/28385102
#SPJ4
compoundsgroup of answer choicesare made up of molecules that are a combination of two or more elements.cannot be broken down into simpler substances.are composed of just one kind of atom.cannot be studied by science.are made of protons only.
Compounds are made up of molecules that are a combination of two or more elements. Therefore, option A is correct.
What do you mean by compound ?The compound is defined as a substance made from two or more different elements that have been chemically joined. Water (H2O), which is made from the elements hydrogen and oxygen, and table salt (NaCl), which is made from the elements sodium and chloride, are two examples of compounds.
Molecular compounds have no electrical charge. When a metal reacts with a nonmetal, ionic compounds are (usually) formed (or a polyatomic ion). When two nonmetals react with each other, covalent compounds are formed.
Thus, option A is correct.
To learn more about the compound, follow the link;
https://brainly.com/question/14117795
#SPJ1
provide the appropriate iupac name for the following alcohol:
Answer: You didn't post the alcohol
Explanation: If it is the one in the screenshot then the answer would be 3-phenlylpentone-2-ol
The chemical structure and kind of alcohol determine the molecule's IUPAC nomenclature.
The hydroxyl (-OH) group is often bonded to a hydrocarbon chain, and the hydroxyl group's position on the chain is identified by a number in the IUPAC designation of an alcohol. For instance, the alcohol is known as a "alkanol" with the suffix -ol denoting the presence of the hydroxyl group if the hydrocarbon chain is a straight chain alkane. Additionally, a number is added before the suffix to indicate where the hydroxyl group is located, as in "2-propanol".
learn more about alchol at:
brainly.com/question/14621518
#SPJ4
if 5.4 moles of Na₂CO₃ react with excess calcium hydroxide. how many grams of CaCO₃ will be produced?
Na₂CO₃+Ca(OH)₂=2NaOH+CaCO₃
Answer:
540.47g approximately
Explanation:
No. of moles in Na₂CO₃ = 5.4 moles
Mole ratio of Na₂CO₃ : CaCO₃ = 1:1
No. of moles in CaCO₃ = 5.4 moles
Mass of CaCO₃ = 5.4 × 100.0869
= 540.46926g
all of the following compounds would produce an electrolyte solution when dissolved in water except
A) Glucose would not produce an electrolyte solution when dissolved in water.
An electrolyte is a substance that produces an electrically conducting solution when dissolved in a polar solvent, such as water. Electrolytes are typically ionic compounds that dissociate into positively charged ions (cations) and negatively charged ions (anions) in solution.
B) Magnesium sulfate, C) Ammonium chloride, and D) Potassium iodide are all ionic compounds that dissociate into ions when dissolved in water, producing an electrically conducting solution and making them electrolytes.
In contrast, glucose (A) is a simple sugar that does not dissociate into ions when dissolved in water and does not produce an electrically conducting solution. It is therefore not an electrolyte.
Learn more about electrolyte here:
https://brainly.com/question/29771118
#SPJ4
The complete question is:
All of the following compounds would produce an electrolyte solution when dissolved in water except:
A) Glucose
B) Magnesium sulfate
C) Ammonium chloride
D) Potassium iodide
What is the empirical formula for a compound that contains 48.64% carbon 8.16% hydrogen and 43% oxygen?
The empirical formula for a compound that contains 48.64% carbon, 8.16% hydrogen and 43% oxygen is CH2O.
What is empirical formula?Empirical formula is a type of chemical formula that expresses the relative number of each atom present in a molecule of a substance. It is calculated from the elemental composition of a compound, and is the simplest whole number ratio of the elements it contains.
This can be determined by converting the percentage of each element into its molecular weight, then dividing by the smallest molecular weight. The molecular weights for carbon, hydrogen and oxygen are 12.01, 1.01, and 16.00 respectively. Dividing each of these by the smallest value of 1.01, we get 12, 1, and 16. Then, dividing the mass of each element in the compound by the corresponding molecular weight, we get 4, 8, and 2.7. Rounding these values to the nearest whole number gives us the empirical formula of CH2O.
To know more about empirical formula click-
https://brainly.com/question/1603500
#SPJ4
the energy absorbed or released during a reaction in which a substance is produced is called the a. calorie change. c. energy as heat. b. standard condition. d. enthalpy of formation.
The energy absorbed or released during a reaction in which a substance is produced is called d.) enthalpy of formation.
The enthalpy of formation often referred to as the heat of formation, is the energy change that occurs when a substance is formed from its elements under standard conditions. The enthalpy of formation represents the energy absorbed or released when a substance is produced from its constituent elements in their standard states.
For example, the enthalpy of the formation of water is the energy change that occurs when hydrogen gas and oxygen gas are combined to form liquid water under standard conditions. The enthalpy of formation is an important concept in thermodynamics, as it provides information about the energy required or released during chemical reactions, which can be used to predict the feasibility of a reaction, calculate the energy changes during combustion, and design energy-efficient processes.
Learn more about Enthalpy here: https://brainly.com/question/13996238
#SPJ4
for gases initially contained in a 1.0 l vessel and the reaction 2 no2(g) ⇀↽ n2o4(g)
II only , i.e., isothermally decreasing the volume of the container to 0.425 L.
Why would isothermally decreasing the volume of the container to 0.425 L; NOT cause the equilibrium would to shift to the left and convert some N2O4 to NO2?An isothermal change in volume will alter the concentration of the reactants and products in a system at equilibrium, which can cause the equilibrium to shift. However, the shift direction cannot be predicted without considering the effect of the change on both the forward and reverse reaction rates. In this particular case, since the reaction is exothermic (H = -37.7 kJ/mol), decreasing the volume of the container will increase the concentration of the products and decrease the concentration of the reactants, which will cause the equilibrium to shift to the right, favoring the formation of N2O4(g). This shift will counteract the effect of the decrease in volume and restore the original state of the system at equilibrium.
To know more about equilibrium, visit:
https://brainly.com/question/9813711
#SPJ4
The complete question is as follows:
1. in this experiments you observed that the colors of the flames in each sample are different. why are all the flames not the same colors
The colors of flames in experiments can vary based on several factors, including the temperature and composition of the burning material.
In general, the color of a flame is determined by the emission spectrum of the excited molecules and atoms in the flame. When a material is burned, the heat and energy generated excites the molecules and atoms, causing them to emit light. The specific colors that are emitted depend on the temperature of the flame, as well as the chemical composition of the burning material.
For example, in a very hot flame, such as the flame produced by a welder's torch, the temperature can be high enough to excite and ionize the atoms of the burning material, causing them to emit light across the entire visible spectrum and beyond. This results in a flame that appears white.
In cooler flames, such as those produced by a candle, the temperature is not high enough to ionize the atoms, but it is still high enough to excite them and cause them to emit light. The specific colors that are emitted in this case depend on the chemical composition of the burning material. For example, in a candle flame, the wax is primarily composed of hydrocarbons, which emit a yellow-orange light when burned. The blue color that is often seen in the center of the flame is due to the reaction between the hydrogen and carbon in the wax, which produces excited molecules that emit blue light.
In conclusion, the colors of flames in experiments can vary based on the temperature and composition of the burning material. The specific colors that are observed depend on the conditions within the flame and the chemical reactions that are taking place.
Here you can learn more about the colors of the flames
https://brainly.com/question/23955162#
#SPJ11
A bottling plant fills one-gallon jugs with milk. The labels on the jugs state that the volume of milk they contain is 128 fluid ounces (fl. Oz. ). Federal law mandates that the jugs must contain no less than the stated volume. The actual volume of milk in the jugs is normally distributed with mean fl. Oz. And standard deviation fl. Oz. Plant workers take a simple random sample (srs) of 8 jugs, measure the volume of milk in each jug, and calculate the sample mean. What is the shape of the distribution of sample means?.
The distribution of sample means is approximately normal with a mean of 128 fl. Oz. and a standard deviation equal to the standard deviation of the population (fl. Oz.) divided by the square root of the sample size (8).
This is known as the Central Limit Theorem and is true for any population with a finite standard deviation, regardless of the underlying distribution.
The Central Limit Theorem is a fundamental theorem in statistics which states that, given a sufficiently large sample size, the sampling distribution of the mean of a variable will approach a normal distribution , regardless of the underlying distribution of the population. In other words, as the sample size gets larger, the sample mean will become more and more normally distributed, even if the original population is not normally distributed. This is often used when analyzing data, as it allows us to make predictions about the mean of a population based on the sample mean.
Learn more about Central Limit Theorem
https://brainly.com/question/17186021
#SPJ4
what type of chemical bond holds the two strands of dna together
The type of chemical bond that maintains the two strands of DNA together is called a hydrogen bond.
A base from one strand pairs complementary with a base from the other to form hydrogen bonds between the two strands. Although each of these hydrogen connections is weak, the group as a whole is fairly robust.
There are two types of bonds that hold the DNA double helix together: covalent and hydrogen. Each linear thread contains covalent bonds that firmly bind the bases, sugars, and phosphate groups both within and between components. A base from one strand pairs complementary with a base from the other to form hydrogen bonds between the two strands. Although each of these hydrogen connections is weak, the group as a whole is fairly robust.
To learn more about DNA :
https://brainly.com/question/12685046
#SPJ4
A 500 mL flask is filled with krypton (Kr) at STP. How many moles of Kr are present?
The number of moles present in a 500mL flask that is filled with krypton (Kr) at STP is 0.022 moles.
How to calculate number of moles?The number of moles in a substance can be calculated using the following ideal gas law equation as follows:
PV = nRT
Where;
P = pressureV = volumeT = temperaturen = no of molesR = gas law constantAccording to this question, a 500mL flask is filled with krypton (Kr) at STP. The values of T, P and R at STP are as follows:
T = 273KP = 1 atmR = 0.0821 Latm/K1 × 0.5 = n × 0.0821 × 273
0.5 = 22.41n
n = 0.022 moles
Learn more about moles at: https://brainly.com/question/21050624
#SPJ1
How is thermal energy transferred between objects?
Thermal energy is transferred between objects by conduction, convection, and radiation. In conduction, heat is transferred through direct contact between objects.
What is thermal energy?
Thermal energy is energy that is generated from heat. It is the result of the movement of energy from a higher temperature to a lower temperature. Thermal energy is transferred by conduction, convection, and radiation. Conduction is the transfer of energy through direct contact between two objects. Convection is the transfer of energy through the movement of fluids, such as air or water. Radiation is the transfer of energy through electromagnetic waves. Thermal energy is used in a variety of ways, including powering machines, heating homes, and providing electricity. It is also used to create steam, which is used to power turbines to generate electricity.
Thermal energy is an important part of our lives, and it is a renewable resource that can be used to create a sustainable energy future.
To learn more about thermal energy
https://brainly.com/question/19666326
#SPJ4
Write two balanced reactions for the combination reactions between copper (l and ll) and sulfur
Answer:
The two balanced reactions for the combination reactions between copper (I) and sulfur are:
Cu + S --> CuS
2Cu + 3S --> 2CuS
to what volume should you dilute 126 ml of an 7.15 m cucl2 solution so that 50.5 ml of the diluted solution contains 4.33 g cucl2 ? express your answer in milliliters to three significant figures. view available hint(s)
The volume i should dilute 126 ml of an 7.15 M CuCl₂ solution so that 50.5 ml of the diluted solution contains 4.33 g CuCl₂ is equals to the 1.412 ×10³ mL.
CuCl₂ is an ionic compound that is soluble in water. We can use the molarity and the volume of the initial solution to figure out how many grams of copper(II) chloride it contains. We have,
Volume of dilute solution, V = 126 ml
Molarity of CuCl₂ = 7.15 M
Firstly, we will convert the mass of CuCl₂ to moles : n = m/M
Where n = moles
m = massM = molar massNow, molar mass of CuCl₂ = 1× mass of copper + 2× mass of chlorine= 63.55g/mol + 2×35.45
g/mol = 134.45 g/mol
So, n = 4.33/134.45 = 0.03221 mol
We want to calculate the concentration of the 50.5 mL CuCl₂ solution. Formula is C = n/V
where, c = concentration
n = molesV = volumeWe must convert 50.5 mL to L:
50.5 mL ×1 L/1000mL = 0.0505L
so, C = n/V = 0.03221 mol/0.0505L
C = 0.638 M. Use the dilution formula to find the volume of the diluted solution: C₁V₁ = C₂V₂
Where, C₁ is the initial concentration
V₁ --> the initial volumeC₂ --> the diluted concentrationV₂ --> the final volume of the diluted solutionSubstitute V₁ = 126 ml , C₁ = 7.15 M , C₂
= 0.638 M
Thus, volume of dilute solution,
7.15 M × 126 mL = 0.638 M × V₂
=> V₂ = 126× 7.15 /0.638 × 1000
=> V₂ = 1.412068 L
but we have the volume in mililiter units, so the required volume is 1.412 × 10³ mL.
To learn more about Molarity, refer:
https://brainly.com/question/12530494
#SPJ4
Question_____series of lines are the only lines in hydrogen spectrum which appear in the visible region.ALymanBBalmerCPaschenDBrackettMedium
This series of the hydrogen emission spectrum is known as the Balmer series.
This is the only series of lines in the electromagnetic spectrum that lies in the visible region.
What is the Balmer series?
The Balmer series, or Balmer lines in atomic physics, is one of a set of six named series describing the emission spectral lines of the hydrogen atom. The Balmer series is calculated using the Balmer formula, an empirical equation discovered by Johann Balmer in 1885To know more about balmer series, click the link given below:
https://brainly.com/question/5295294
#SPJ4
If the rate law for a chemical reaction is: Rate k [XI2Y What are the units of the rate constant k?A)M-3 s1 B)M4s-1 C)M1s-1 D)M-2 s -1 E)Ms1
The units of the rate constant k in the rate law "Rate k [XI2Y" are (M^-1 s^-1).
The rate of a reaction is typically expressed as the change in concentration of a reactant or product over time. In the rate law, the rate of the reaction is proportional to the product of the concentration of reactants raised to some power, which are represented by [X] and [Y] in the rate law. The proportionality constant, k, is the rate constant, which has units that reflect the units of concentration raised to the power indicated by the coefficients in the rate law.
In this case, the rate law has a single reactant raised to the power of 2, so the units of k would be (M^-1 s^-1). The negative exponent indicates that the rate of the reaction decreases as the concentration of the reactant increases, and the positive exponent for time indicates that the rate of the reaction increases with time.
Learn more about rate law here:
https://brainly.com/question/30379408
#SPJ4
what volume of a 1.775-m solution of glucose, c6h12o6, can be prepared from 50.00 ml of a 3.00-m glucose solution?
The volume of the 1.775 M glucose solution that can be prepared from 50.00 ml of a 3.00 M glucose solution is 28.08 ml.
Molarity (M) of a solution is defined as the number of moles of solute per liter of solution. To prepare a solution with a desired molarity, we need to determine the number of moles of solute required and then use that information to calculate the volume of the solution needed.
In this case, the desired molarity of glucose solution is 1.775 M, and we have 50.00 ml of a 3.00 M glucose solution. To determine the number of moles of glucose in 50.00 ml of the 3.00 M glucose solution, we need to multiply the volume by the molarity:
n = V x M = 50.00 ml x (3.00 mol/L) = 0.150 mol
Once we have the number of moles, we can calculate the volume of the solution needed to achieve the desired molarity:
V = n / M = 0.150 mol / (1.775 mol/L) = 0.0847 L = 84.7 ml
To be precise, 50 ml of a 3 M solution will yield 28.08 ml of a 1.775 M solution.
To know more about Molarity (M) here:
https://brainly.com/question/19279364#
#SPJ11