Answer:
The forces are balanced
Explanation:
Since the brick is not moving on the scale, it means that the forces are balanced. An unbalanced force would only be present if there is motion of the brick. So, since the brick does not move, the net force on it is zero. Thus, the forces on it are balanced.
You stand 3.8 m in front of a plane mirror. Your little brother is 1.2 m in front of you, directly between you and the mirror. What is the distance from you to your brother's image?
Express your answer to two significant figures and include the appropriate units.
The distance from you to your brother's image is 6.4 meters.
To calculate the distance from you to your brother's image in the mirror, we first need to find the distance from your brother to the mirror and then double that distance, since the image in a plane mirror is always the same distance behind the mirror as the object is in front of it.
Your brother is 1.2 m in front of you, so he is 3.8 m - 1.2 m = 2.6 m in front of the mirror. Since the image is the same distance behind the mirror, the image is also 2.6 m away from the mirror.
Now, to find the distance from you to your brother's image, add the distance from you to the mirror (3.8 m) and the distance from the mirror to the image (2.6 m): 3.8 m + 2.6 m = 6.4 m.
Therefore, the distance from you to your brother's image is 6.4 meters.
To learn more about Optics, visit:
https://brainly.com/question/22664227
#SPJ11
A longitudinal earthquake wave strikes a boundary between two types of rock at a 47 degree angle. As the wave crosses the boundary, the specific gravity of the rock changes from 4.0 to 2.8
Assuming that the elastic modulus is the same for both types of rock, determine the angle of refraction.
sigma = ?
The angle of refraction can be determined using Snell's law, which states that the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the velocities of the wave in the two media.
However, since the elastic modulus is the same for both types of rock, the velocity of the wave remains constant, and the angle of refraction is equal to the angle of incidence. Therefore, the angle of refraction in this scenario is 47 degrees.
Snell's law is given by:
[tex]n1 * sin(θ1) = n2 * sin(θ2)[/tex]
where n1 and n2 are the refractive indices of the two media, and θ1 and θ2 are the angles of incidence and refraction, respectively.
In this case, since the elastic modulus is the same for both types of rock, the velocities of the wave in the two media are the same. This means that the refractive indices are also the same (since the refractive index is directly proportional to the velocity). Therefore, we can rewrite Snell's law as:
[tex]sin(θ1) = sin(θ2)[/tex]
Since the sine function is symmetric about 45 degrees, the angle of refraction (θ2) will be the same as the angle of incidence (θ1). Therefore, the angle of refraction in this scenario is 47 degrees.
learn more about wave here:
https://brainly.com/question/25954805
#SPJ11
when a 3.0-f capacitor is connected to a generator whose rms output is 29 v, the current in the circuit is observed to be 0.40 a. what is the frequency of the source? hz
The frequency of the source is approximately 0.77 Hz.
To determine the frequency of the source, we can use the formula for capacitive reactance (Xc) and Ohm's law.
The formula for capacitive reactance is:
Xc = 1 / (2 * π * f * C)
Where Xc is the capacitive reactance, f is the frequency, and C is the capacitance.
Ohm's law states:
Vrms = Irms * Xc
Where Vrms is the root mean square voltage, and Irms is the root mean square current.
From the given information, we have:
C = 3.0 F
Vrms = 29 V
Irms = 0.40 A
We can rearrange Ohm's law to find Xc:
Xc = Vrms / Irms
Xc = 29 V / 0.40 A
Xc ≈ 72.5 Ω
Now we can use the capacitive reactance formula to find the frequency:
72.5 Ω = 1 / (2 * π * f * 3.0 F)
Rearranging the equation to solve for f:
f = 1 / (2 * π * 3.0 F * 72.5 Ω)
f ≈ 0.77 Hz
To know more about frequency visit :-
https://brainly.com/question/30783512
#SPJ11
Determine the molar mass of an unknown gas if a sample weighing 0.389 g is collected in a flask with a volume of 102 mL at 97 ∘C. The pressure of the chloroform is 728mmHg. a. 187gmol b. 1218 mol c. 112 g/mol d. 31.6 g/mol e. 8.28×10 −3g/mol
The molar mass is the mass of a mole of species. This can be calculated using the ideal gas equation. It is given as
PV = nRT Where, P, V, n, R, and T are the pressure, volume, moles, gas constant, and temperature of the gas respectively. The pressure, volume, and temperature of the anesthetic gas are mentioned to be equal to 728 mmHg, 102 mL, and 97℃ respectively. The value of gas constant (R) = 62.36 (LmmHg) / (Kmol). The following conversions are made to calculate the moles of the gas:1 mL = 10⁻³ L 102 mL = 102 ✕ 10⁻³ L = 0.102 L 1℃ = 1+ 273.15 K 97℃ = 97 + 273.15K = 370.15 K Substituting the values in the equation: PV = nRT 728 mmHg ✕ 0.102 L = n ✕ 62.36 (L.mmHg) / (K.mol) ✕ 370.15 K n = (74.25 L.mmHg) / (23082.5 L.mmHg / mol) n = 3.21 ✕ 10⁻³ mol The number of moles of a species is equal to the given mass of the species divided by its molar mass. It is represented as The number of moles of species = given mass / molar mass It is given that 0.389 g of anesthetic gas is taken. The molar mass = given mass/number of moles of species= 0.398 g / 3.21 ✕ 10⁻³ mol = 123.98 g / mol
Learn more about moles here:
https://brainly.com/question/31597231
#SPJ11
Bode plots can help find the steady-state error. That is, one can find the error constants Kp, K, and K, from the Bode magnitude plot. Given the open-loop Bode magnitude plot below, find the steady-state error eco) of the closed-loop system to a unit step input. 20 dB
To find the steady-state error (ess) of the closed-loop system to a unit step input from the given open-loop Bode magnitude plot, we need to use the formula:
From the given open-loop Bode magnitude plot, we can see that at the frequency where the magnitude is 20 dB, the phase is -180 degrees. This corresponds to a phase shift of pi radians. At this frequency, the gain of the open-loop transfer function is 0 dB.
which corresponds to a gain constant Kp of 1.Substituting Kp = 1 into the formula for steady-state error, we get: ess = 1 / (1 + 1) = 1/2 Therefore, the steady-state error of the closed-loop system to a unit step input is 1/2 or 50%.
To know more about magnitude visit
https://brainly.com/question/29766788
#SPJ11
An electron is accelerated through some potential difference to a final kinetic energy of 2.55 MeV. Using special relativity, determine the ratio of the electron's speed u to the speed of light c.
If an electron is accelerated through some potential difference to a final kinetic energy of 2.55 MeV, then the ratio of the electron's speed u to the speed of light c is ≈ 0.9999999904.
Explanation:
According to special relativity, the kinetic energy of a particle with rest mass m and speed u is given by:
K = (gamma - 1)mc²
where gamma is the Lorentz factor, given by:
gamma = 1/√(1 - u²/c²)
In this problem, we know that the final kinetic energy of the electron is K = 2.55 MeV, and we can assume that the rest mass of the electron is m = 9.11 x 10⁻³¹ kg. We are asked to find the ratio of the electron's speed u to the speed of light c.
First, we can use the equation for gamma to solve for u/c in terms of K and m:
gamma = 1/√(1 - u²/c²)
1 - u²/c² = 1/gamma²
u^2/c² = 1 - 1/gamma²
u/c = √(1 - 1/gamma²)
Next, we can use the equation for kinetic energy to solve for gamma in terms of K and m:
K = (gamma - 1)mc²
gamma - 1 = K/(mc²)
gamma = 1 + K/(mc²)
Substituting this expression for gamma into the expression for u/c, we get:
u/c = √1 - 1/(1 + K/(mc²))²)
Plugging in the values for K and m, we get:
u/c = √(1 - 1/(1 + 2.55x10⁶/(9.11x10⁻³¹ x (3x10⁸)²))²) ≈ 0.9999999904
Therefore, the ratio of the electron's speed u to the speed of light c is approximately 0.9999999904, which is very close to 1. This means that the electron is traveling at a speed very close to the speed of light.
Learn more about relativity at: https://brainly.com/question/14140033
#SPJ11
the star 51 pegasi has about the same mass and luminosity as our sun and is orbited by a planet with an orbital period of 4.23 days and mass estimated to be 0.6 times the mass of jupiter.
The star 51 Pegasi, similar in mass and luminosity to the Sun, is orbited by a planet with an orbital period of 4.23 days and a mass of 0.6 times that of Jupiter.
51 Pegasi, a star with mass and luminosity comparable to our Sun, hosts a planet with an estimated mass of 0.6 Jupiter masses. This planet orbits the star with a relatively short orbital period of just 4.23 days, indicating that it is located close to the star.
The close proximity of the planet to its star suggests that it experiences strong gravitational forces, resulting in its rapid orbital period. This planetary system serves as an interesting example of how exoplanets can vary in size, mass, and orbital characteristics compared to the planets within our own Solar System.
To know more about Solar System click on below link:
https://brainly.com/question/12075871#
#SPJ11
Oxygen molecules are 16 times more massive than hydrogen molecules. At a given temperature, how do their average molecular speeds compare? The oxygen molecules are moving:
a. at 1/16 the speed
b. 4 times faster
c. at 1/4 the speed
d. 16 times faster
At a given temperature, the average molecular speeds of oxygen and hydrogen molecules are the same. Therefore, the oxygen molecules are moving at the same speed as the hydrogen molecules (option d).
At a given temperature, the average molecular speeds of gases are determined by the root mean square (rms) speed formula, which is given by √(3RT/m), where R is the gas constant, T is the temperature, and m is the molar mass of the gas. Since the temperature is the same for both oxygen and hydrogen molecules, the only difference lies in their molar masses. Oxygen molecules are 16 times more massive than hydrogen molecules. However, the mass cancels out in the rms speed formula. Therefore, the average molecular speeds of oxygen and hydrogen molecules at the given temperature are the same, making option d, "16 times faster," the correct choice.
Learn more about average molecular speeds here:
https://brainly.com/question/30485625
#SPJ11
A particle accelerator has a circumference of 26 km. Inside it protons are accelerated to a speed of 0.999999972c. What is the circumference of the accelerator in the frame of reference of the protons?
The circumference of the accelerator in the frame of reference of the protons is approximately 209.81 meters.
To find the circumference in the proton's frame of reference, we must use the concept of length contraction, which occurs due to the high speed of the protons.
Length contraction is described by the equation L = L0 * sqrt(1 - v²/c²), where L is the contracted length, L0 is the original length (26,000 meters), v is the proton's speed (0.999999972c), and c is the speed of light.
First, calculate the Lorentz factor: sqrt(1 - v²/c²) = sqrt(1 - (0.999999972)^2) ≈ 0.00807. Then, multiply this factor by the original circumference: L = 26,000 * 0.00807 ≈ 209.81 meters. This is the contracted circumference in the proton's frame of reference.
To know more about speed of light click on below link:
https://brainly.com/question/16931111#
#SPJ11
consider a pipe 45.0 cm long if the pipe is open at both ends. use v=344m/s. Now pipe is closed at one end. What is the number of the highest harmonic that may be heard by a person who can hear frequencies from 20 Hz to 20000 Hz?
The highest harmonic that may be heard by a person who can hear frequencies from 20 Hz to 20000 Hz is the fifth harmonic of the closed pipe, which has a frequency of 955.3 Hz.
When the pipe is open at both ends, the resonant frequencies are given by:
f_n = n*v/2L, where n is an integer (1, 2, 3, ...)
When the pipe is closed at one end, the resonant frequencies are given by:
f_n = n*v/4L, where n is an odd integer (1, 3, 5, ...)
In this case, the pipe is 45.0 cm long, which is equal to 0.45 m. The speed of sound is given as v=344 m/s.
The lowest resonant frequency for an open pipe occurs when n = 1:
f_1 = v/2L = 344/(2*0.45) = 382.2 Hz
The second resonant frequency for an open pipe occurs when n = 2:
f_2 = 2v/2L = 2344/(20.45) = 764.4 Hz
The third resonant frequency for an open pipe occurs when n = 3:
f_3 = 3v/2L = 3344/(20.45) = 1146.6 Hz
For a closed pipe, the first resonant frequency occurs when n = 1:
f_1 = v/4L = 344/(4*0.45) = 191.1 Hz
The second resonant frequency for a closed pipe occurs when n = 3:
f_3 = 3v/4L = 3344/(40.45) = 573.2 Hz
The third resonant frequency for a closed pipe occurs when n = 5:
f_5 = 5v/4L = 5344/(40.45) = 955.3 Hz
Click the below link, to learn more about Harmonic frequency:
https://brainly.com/question/31748639
#SPJ11
by what factor does an object's momentum change if you double its speed when its original speed is 30 m/s ?
The factor by which an object's momentum changes when we double its speed is 2.
When an object is moving, it has momentum, which is defined as the product of its mass and velocity. Momentum is a vector quantity, which means it has both magnitude and direction. If we double the speed of an object, we also double its velocity, and therefore its momentum. In other words, if the original speed of an object is 30 m/s, and we double it to 60 m/s, then its momentum will also double. This is because momentum is directly proportional to velocity. Therefore, if we double the velocity of an object, we also double its momentum. In terms of the equation for momentum, p = mv, doubling the velocity will result in a new momentum of 2mv, which is twice the original momentum.
To know more about momentum visit:
https://brainly.com/question/30677308
#SPJ11
Blue light of wavelength 440 nm is incident on two slits separated by 0.30 mm. Determine the angular deflection to the center of the 3rd order bright band.
Therefore, the angular deflection to the center of the 3rd order bright band is 0.0073 radians.
When a beam of blue light of wavelength 440 nm is incident on two slits separated by 0.30 mm, it creates a diffraction pattern of bright and dark fringes on a screen. The bright fringes occur at specific angles known as the angular deflection. To determine the angular deflection to the center of the 3rd order bright band, we can use the formula:
θ = (mλ)/(d)
Where θ is the angular deflection, m is the order of the bright band, λ is the wavelength of the light, and d is the distance between the two slits.
In this case, we are interested in the 3rd order bright band. Therefore, m = 3, λ = 440 nm, and d = 0.30 mm = 0.0003 m.
Substituting these values into the formula, we get:
θ = (3 × 440 × 10^-9)/(0.0003) = 0.0073 radians
To know more about wavelength visit:
https://brainly.com/question/13676179
#SPJ11
The max speed measured for a golf ball is 273 km/h. If a
golf ball with a mass of 47 g has a momentum of 5. 83 kg
m/s, the same as the baseball in the pervious problem, what
would its speed be? How does this speed compare to a golf ball's max measured speed?
The speed of the golf ball would be approximately 124.04 m/s. This speed is significantly higher than the maximum measured speed of 273 km/h (75.83 m/s) for a golf ball, indicating that the calculated speed is not realistic.
To find the speed of the golf ball, we can use the formula for momentum:
momentum = mass × velocity
Rearranging the formula to solve for velocity:
velocity = momentum / mass
Substituting the given values:
velocity = 5.83 kg m/s / 0.047 kg = 124.04 m/s
The calculated speed of 124.04 m/s is much higher than the maximum measured speed of a golf ball (273 km/h or 75.83 m/s). This suggests that the given momentum value of the golf ball (5.83 kg m/s) is not realistic or there may be some other factors affecting the golf ball's maximum speed.
learn more about speed here:
https://brainly.com/question/13242540
#SPJ11
as a 3.0-kg bucket is being lowered into a 10-m-deep well, starting from the top, the tension in the rope is 9.8 n. the acceleration of the bucket will be:
The acceleration is -6.53 m/s^2 and it is in a downward direction.
The acceleration of the bucket can be found using the equation F_net = ma, where F_net is the net force acting on the bucket, m is the mass of the bucket, and a is the acceleration of the bucket. In this case, the net force is the tension in the rope minus the weight of the bucket, which is given by F_net = T - mg, where T is the tension in the rope, g is the acceleration due to gravity (9.8 m/s^2), and m is the mass of the bucket.
Plugging in the given values, we get:
F_net = T - mg = 9.8 N - (3.0 kg)(9.8 m/s^2) = -19.6 N
The negative sign indicates that the net force is downward, which makes sense because the bucket is being lowered into the well. Using F_net = ma, we can solve for the acceleration:
a = F_net / m = (-19.6 N) / (3.0 kg) = -6.53 m/s^2
Again, the negative sign indicates that the acceleration is downward. This means that as the bucket is being lowered into the well, its speed is decreasing and its velocity is becoming more negative. The tension in the rope is necessary to balance the weight of the bucket and provide a net force downward, which results in a negative acceleration.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ11
A rabbit starts from rest and in 3 seconds reaches a speed of 9 m/s. If we assume that the speed changed at a constant rate (constant net force), what was the average speed during this 3 second interval? How far did the rabbit go in this 3 second interval?
Since the rabbit starts from rest, its initial speed is 0 m/s. Using the formula for constant acceleration, we can find the distance the rabbit travels in 3 seconds:
The rabbit starts from rest (0 m/s) and reaches a speed of 9 m/s in 3 seconds with a constant rate of change. To find the average speed, we can use the formula:
Average speed = (Initial speed + Final speed) / 2
Average speed = (0 m/s + 9 m/s) / 2 = 4.5 m/s
Now, to find the distance the rabbit traveled in the 3-second interval, we can use the formula:
Distance = Average speed × Time
Distance = 4.5 m/s × 3 s = 13.5 meters
So, the rabbit traveled 13.5 meters during the 3-second interval.
To know about speed visit;
https://brainly.com/question/28224010
#SPJ11
explain the difference between the diffraction and interference of light. describe the physics of both.
Diffraction and interference are two important concepts in physics related to the behavior of light. Diffraction refers to the bending of light waves around an obstacle or through a small opening, resulting in a spread of light beyond the shadow region.
This phenomenon can be observed in everyday life, such as the appearance of a fringed pattern when light passes through a narrow slit or the spread of light around the edge of a door.
Interference, on the other hand, occurs when two or more light waves meet and combine to form a new wave with a different amplitude and direction. This can produce patterns of constructive or destructive interference, depending on the relative phase of the waves. Interference is commonly observed in experiments involving lasers and thin films, as well as in natural phenomena like the iridescent colors of soap bubbles and oil slicks.
The physics behind diffraction and interference can be explained by the wave nature of light, which is described by its wavelength, frequency, and amplitude. When light waves encounter an obstacle or a narrow opening, they diffract or bend around it, resulting in a spread of light beyond the shadow region. This effect is more pronounced for longer wavelengths, such as those of red and infrared light, and can be minimized by using smaller openings or higher frequencies.
Interference, on the other hand, results from the superposition of two or more waves, which can either reinforce or cancel each other out depending on their relative phase. This effect is commonly observed in experiments involving lasers and thin films, as well as in natural phenomena like the iridescent colors of soap bubbles and oil slicks.
diffraction and interference are two important concepts in physics related to the behavior of light. While diffraction refers to the bending of light waves around an obstacle or through a small opening, interference occurs when two or more light waves meet and combine to form a new wave with a different amplitude and direction. Both phenomena can be explained by the wave nature of light and have important applications in a wide range of fields, including optics, telecommunications, and materials science.
To know more about Interference visit:
brainly.com/question/16098226
#SPJ11
An electronic system contains three cooling components that operate independently. The probability of each component's failure is 0.05. The system will overheat if and only if at least two co fail. Calculate the probability that the system will overheat. (A) 0.007 (B) 0.045 (C) 0.098 (D) 0.135 (E) 0.143
This means that none of the answer choices provided are correct. The correct answer should be 0. To calculate the probability that the system will overheat, we need to find the probability that at least two of the three cooling components fail.
One way to approach this is to use the complement rule: find the probability that fewer than two components fail, and subtract that from 1. The probability that exactly one component fails is (0.05)^1 * (0.95)^2 * 3 (since there are 3 ways to choose which component fails). This is approximately 0.14.
The probability that no components fail is (0.95)^3, which is approximately 0.86.
So the probability that fewer than two components fail is the sum of these two probabilities:
0.14 + 0.86 = 1
Therefore, the probability that at least two components fail (i.e. the system overheats) is:
1 - 1 = 0
This means that none of the answer choices provided are correct. The correct answer should be 0.
To know more about probability visit:
https://brainly.com/question/30034780
#SPJ11
find the radius of convergence, r, of the series. [infinity] (x − 4)n n5 1 n = 0
As n approaches infinity, the limit converges to 1. Therefore, the radius of convergence, r, is 1.
To find the radius of convergence, r, of the series [infinity] (x − 4)n n5 / 1 n = 0, we can use the ratio test. The ratio test states that if we take the limit as n approaches infinity of the absolute value of the ratio of the nth term to the (n-1)th term, and this limit is less than 1, then the series converges absolutely. If this limit is greater than 1, then the series diverges. If the limit is exactly 1, the test is inconclusive and we need to use another method to determine convergence or divergence.
Let's apply the ratio test to our series:
|((x - 4)^(n+1) * (n+1)^5) / (x - 4)^n * n^5)| = |(x - 4) * (n+1)/n|^(5)
We want to find the limit of this expression as n approaches infinity:
lim (n→∞) |(x - 4) * (n+1)/n|^(5)
To know more about converges visit :-
https://brainly.com/question/29178301
#SPJ11
Find the peak magnetic field in an electromagnetic wave whose peak electric field is Emax. (B) Find the peak electric field in an electromagnetic wave whose peak magnetic field is B max: Emax = 260 V/m; B max = 45 nT; ] = = 8.667e-6 T Submit Answer Incorrect. Tries 1/12 Previous Tries Submit Answer Tries 0/12
The peak electric field in this electromagnetic wave is 13.5 V/m.
To find the peak magnetic field in an electromagnetic wave whose peak electric field is Emax, we can use the equation B = E/c, where B is the peak magnetic field, E is the peak electric field, and c is the speed of light. Therefore, the peak magnetic field can be calculated as follows:
B = E/c = Emax/c = 260 V/m / 3 x 10^8 m/s = 8.67 x 10^-7 T
So, the peak magnetic field in this electromagnetic wave is 8.67 x 10^-7 T.
To find the peak electric field in an electromagnetic wave whose peak magnetic field is B max, we can use the equation E = B x c, where E is the peak electric field, B is the peak magnetic field, and c is the speed of light. Therefore, the peak electric field can be calculated as follows:
E = B x c = Bmax x c = 45 x 10^-9 T x 3 x 10^8 m/s = 13.5 V/m
So, the peak electric field in this electromagnetic wave is 13.5 V/m.
To know more about electromagnetic visit:
https://brainly.com/question/17057080
#SPJ11
Consider light passing from air to water. What is the ratio of its wavelength in water to its wavelength in air
The difference between light's wavelength in air and water is roughly 0.75. This indicates that light's wavelength in water is roughly 75% smaller than it is in air.
Consider light passing from air to water. The ratio of its wavelength in water to its wavelength in air is given by the ratio of their refractive indices.
Light's wavelength is impacted by a change in its speed as it travels through different media. The speed of light is lowered in a medium relative to its speed in a vacuum, and this reduction is measured by the medium's refractive index. Air has a refractive index of roughly 1, while water has a refractive index of roughly 1.33.
To find the ratio of the wavelength in water (λ_water) to the wavelength in air (λ_air), we can use the formula:
λ_water / λ_air = n_air / n_water
where n_air and n_water are the refractive indices of air and water, respectively. Plugging in the values, we get:
λ_water / λ_air = 1 / 1.33
This simplifies to:
λ_water / λ_air ≈ 0.75
To know more about the refractive index, click here;
https://brainly.com/question/23750645
#SPJ11
3. gravitational potential energy a satellite with angular momentum l and mass m is running at a circular orbit with radius r. find its kinetic energy, potential energy, and total energy
The total energy of the satellite is given by the sum of its kinetic and potential energy is K =[tex](1/2) l^2/(mr^2)[/tex]
, U = -GMm/r , E = K + U respectively .
To find the kinetic energy of the satellite, we can use the formula:
K = [tex](1/2)mv^2[/tex]
where m is the mass of the satellite, and v is the velocity of the satellite. Since the satellite is running at a circular orbit, we know that its velocity is given by:
v = sqrt(GM/r)
where G is the gravitational constant, M is the mass of the central body (around which the satellite is orbiting), and r is the radius of the orbit.
Using the fact that the satellite has angular momentum l, we can also express the velocity in terms of the radius and the angular momentum:
v = l/(mr)
Putting it all together, we can write the kinetic energy as:
K = [tex](1/2)m(l^2)/(m^2 r^2) = (1/2) l^2/(mr^2)[/tex]
Now, to find the potential energy of the satellite, we can use the formula:
U = -GMm/r
where U is the potential energy, and the negative sign indicates that the potential energy is negative (since the satellite is in a bound orbit).
Finally, the total energy of the satellite is given by the sum of its kinetic and potential energy:
E = K + U
So, putting it all together, we get:
K =[tex](1/2) l^2/(mr^2)[/tex]
U = -GMm/r
E = K + U
To know more about Potential energy refer here :
https://brainly.com/question/1455245
#SPJ11
A student drops a ball of mass 0.5kg from the top of a 20m tall building. (a) How long does it take the ball to hit the ground (time of flight)? (b) What is the final velocity of the ball? (c) What is the average velocity of the ball?
To find the average velocity of the ball, we can use the equation: average velocity = (initial velocity + final velocity) / 2. Since the initial velocity is 0 m/s (as the ball is dropped):
average velocity = (0 + 19.82) / 2 ≈ 9.91 m/s
(a) To find the time of flight, we can use the formula:
h = 1/2 * g * t^2
Where h is the height of the building (20m), g is the acceleration due to gravity (9.8 m/s^2), and t is the time of flight. Rearranging this formula to solve for t, we get:
t = sqrt(2h/g)
Plugging in the values, we get:
t = sqrt(2*20/9.8) = 2.02 seconds
So it takes the ball 2.02 seconds to hit the ground.
(b) To find the final velocity of the ball, we can use the formula:
v^2 = u^2 + 2gh
Where v is the final velocity, u is the initial velocity (which is zero since the ball is dropped from rest), g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the building (20m). Rearranging this formula to solve for v, we get:
v = sqrt(2gh)
Plugging in the values, we get:
v = sqrt(2*9.8*20) = 19.8 m/s
So the final velocity of the ball is 19.8 m/s.
(c) To find the average velocity of the ball, we can use the formula:
average velocity = (final velocity + initial velocity) / 2
Since the initial velocity is zero, we just need to divide the final velocity by 2:
average velocity = 19.8 / 2 = 9.9 m/s
The average velocity of the ball is 9.9 m/s.
To know more about average velocity visit:-
https://brainly.com/question/862972
#SPJ11
long term compressive strength of concrete using type iii portland cement is higher than with type i portland cement (general purpose). True or false ?
False. Type III Portland cement is a high-early-strength cement, which means it gains strength faster in the early stages of curing. However.
the long-term compressive strength of concrete using Type I Portland cement (general-purpose) is generally higher. Type I cement has a slower hydration rate, allowing for more complete and denser hydration of the cement particles over time, resulting in stronger concrete in the long run. So, Type I cement is preferred for applications where long-term strength and durability are critical, such as structural elements in buildings and bridges. Type III Portland cement is a high-early-strength cement, designed for rapid strength development in the early days of concrete curing. However, Type I Portland cement (general-purpose) generally results in higher long-term compressive strength. Type I cement has a slower hydration rate, allowing for more complete and denser hydration over time, leading to stronger and more durable concrete in the long run.
learn more about strength here:
https://brainly.com/question/28706416
#SPJ11
Given the following circuit with va(t) = 60 cos (40,000t) V and vb(t) = 90 sin (40,000t + 180°) V. Calculate the current through the inductor, io(t). Report your answers in amps. Report your answers with no spaces or special characters. Also, ROUND to the nearest WHOLE number for all numbers. For example, vb(t) could be entered as 60cos(40000t+180) io(t) = ?
In the given circuit, we have two voltage sources, va(t) = 60 cos(40,000t) V and vb(t) = 90 sin(40,000t + 180°) V. To calculate the current through the inductor io(t), we need to find the equivalent voltage across the inductor.
First, we convert vb(t) to a cosine function to match the format of va(t): vb(t) = 90 cos(40,000t + 270°) V, as sin(x + 180°) = cos(x + 270°). Now, we have both voltage sources in the cosine form. Next, we find the equivalent voltage across the inductor by adding the two voltage sources: veq(t) = va(t) + vb(t) = 60 cos(40,000t) + 90 cos(40,000t + 270°) V. For an inductor, the relationship between voltage and current is given by v(t) = L * di(t)/dt, where L is the inductance and di(t)/dt is the time derivative of the current. To find io(t), we need to integrate the equivalent voltage function with respect to time. Assuming an ideal inductor, the integration will result in an equation in the form: io(t) = A * cos(40,000t) + B * sin(40,000t), where A and B are constants.
Learn more about inductance here :
https://brainly.com/question/30434803
#SPJ11
(a) determine the frequencies (in khz) at the points indicated in fig. 22.104. (b) determine the voltages (in mv) at the points indicated on the plot in fig. 22.104.
The most important details are to identify the points on the graph where the frequencies are indicated and to measure the horizontal and vertical distances from the y-axis. These steps can be applied to find the frequencies and voltages.
To answer the question, it would need the specific details and data points from Fig. 22.104. However, It provide a general step-by-step explanation of how to approach this type of problem.
(a) To determine the frequencies (in kHz) at the points indicated in Fig. 22.104, follow these steps:
. Identify the points on the graph where the frequencies are indicated.
. Determine the horizontal distance of each point from the y-axis, as this represents the frequency.
. Read or measure the horizontal distance and convert the values to kHz if they are given in a different unit.
(b) To determine the voltages (in mV) at the points indicated on the plot in Fig. 22.104, follow these steps:
. Identify the points on the graph where the voltages are indicated.
. Determine the vertical distance of each point from the x-axis, as this represents the voltage.
. Read or measure the vertical distance and convert the values to mV if they are given in a different unit.
Once it has the necessary data points from Fig. 22.104, it can apply these steps to find the frequencies and voltages.
You can learn more about frequencies at: https://brainly.com/question/14316711
#SPJ11
estimate the heat required to heat a 0.19 −kg apple from 12 ∘c to 33 ∘c . (assume the apple is mostly water.)
To estimate the heat required to heat a 0.19 kg apple from 12°C to 33°C is 16,678 Joules
we'll use the formula for heat transfer: Q = mcΔT, where Q is the heat, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
Since the apple is mostly water, we can assume the specific heat capacity (c) of water, which is 4.18 J/(g·°C). Convert the mass of the apple to grams (1 kg = 1000 g): 0.19 kg = 190 g. Now, calculate the temperature change (ΔT): ΔT = 33°C - 12°C = 21°C.
Plug in these values into the formula: Q = (190 g) x (4.18 J/(g·°C)) x (21°C). Solving for Q, we get Q ≈ 16,678 J.
So, approximately 16,678 Joules of heat are required to heat the 0.19 kg apple from 12°C to 33°C, assuming the apple has the same specific heat capacity as water.
Know more about Heat Transfer here:
https://brainly.com/question/10670781
#SPJ11
A child rocks back and forth on a porch swing with an amplitude of 0.300 m and a period of 2.40 s. You may want to review (Pages 425-430) Part A Assuming the motion is approximately simple harmonic, find the child's maximum speed max m/s Submit Previous Answers Request Answer XIncorrect; Try Again; 9 attempts remaining
A child rocks back and forth on a porch swing with an amplitude of 0.300 m and a period of 2.40 s. Assuming the motion is approximately simple harmonic, the child's maximum speed is approximately 0.785 m/s.
Simple harmonic motion refers to the repetitive back-and-forth motion of an object around a stable equilibrium position, where the restoring force is directly proportional to the object's displacement but acts in the opposite direction. It follows a sinusoidal pattern and has a constant period.
The maximum speed of the child can be found by using the equation:
v_max = Aω
where A is the amplitude and ω is the angular frequency. The angular frequency can be found using the equation:
ω = 2π/T
where T is the period.
So, we have:
ω = 2π/2.40 s = 2.617 rad/s
and
v_max = (0.300 m)(2.617 rad/s) ≈ 0.785 m/s
Therefore, the child's maximum speed is approximately 0.785 m/s.
To learn more about simple harmonic refer here:
https://brainly.com/question/30404816#
#SPJ11
A pendulum is observed to complete 32 full cycles in 56 seconds.1. Calculate the period.2. Calculate the frequency.3. Calculate the length.
The period of the pendulum is 1.75 seconds, the frequency is 0.57 Hz, and the length is 7.75 meters. the frequency of a pendulum is dependent on its length and the acceleration due to gravity.
The period of a pendulum is defined as the time taken for one complete cycle or swing. From the given information, we know that the pendulum completed 32 full cycles in 56 seconds. Therefore, the period of the pendulum can be calculated as follows:
Period = time taken for 1 cycle = 56 seconds / 32 cycles
Period = 1.75 seconds
The frequency of the pendulum is the number of cycles completed per second. It can be calculated using the following formula:
Frequency = 1 / Period
Frequency = 1 / 1.75 seconds
Frequency = 0.57 Hz
Finally, we can calculate the length of the pendulum using the following formula:
Length = (Period/2π)² x g
where g is the acceleration due to gravity, which is approximately 9.8 m/s².
Substituting the values, we get:
Length = (1.75/2π)² x 9.8 m/s²
Length = 0.88² x 9.8 m/s²
Length = 7.75 meters
Therefore, the period of the pendulum is 1.75 seconds, the frequency is 0.57 Hz, and the length is 7.75 meters. the frequency of a pendulum is dependent on its length and the acceleration due to gravity. The longer the pendulum, the slower it swings, resulting in a lower frequency. Similarly, a stronger gravitational force will increase the frequency of the pendulum. Pendulums are used in clocks to keep accurate time, as the period of a pendulum is constant, and therefore, the time taken for each swing is also constant. Pendulums are also used in scientific experiments to measure the acceleration due to gravity, as well as in seismometers to detect earthquakes.
To know more about frequency visit :
https://brainly.com/question/30053506
#SPJ11
A simple pendulum of length l is suspended through the ceiling of an elevator. Find the time period of small oscillations if the elevator (a) is going up with an acceleration a 0(b) is going down with an acceleration a 0and (c) is moving with a uniform velocity.
Time period of pendulum in elevator increases, decreases and then remains constant when going up/down with acceleration a0 and uniform velocity.
The time period of a simple pendulum of length l suspended through the ceiling of an elevator depends on the acceleration and velocity of the elevator.
If the elevator is going up with an acceleration of a0, the time period of small oscillations will increase as the effective length of the pendulum increases due to the upward motion of the elevator.
If the elevator is going down with an acceleration of a0, the time period will decrease as the effective length of the pendulum decreases due to the downward motion of the elevator.
If the elevator is moving with a uniform velocity, the time period will remain constant as there is no change in the effective length of the pendulum.
For more such questions on velocity, click on:
https://brainly.com/question/80295
#SPJ11
The time period of a simple pendulum depends on its length and the acceleration due to gravity. In the case of an elevator, the acceleration due to gravity changes due to the acceleration or deceleration of the elevator.
For a pendulum in an elevator going up with an acceleration [tex]a_{0}[/tex, the effective acceleration due to gravity on the pendulum will be (g + a0), where g is the acceleration due to gravity at rest. The time period T for small oscillations is given by the formula: T = 2π√(l / (g + [tex]a_{0}[/tex)). For an elevator going down with an acceleration of [tex]a_{0}[/tex], the effective acceleration due to gravity on the pendulum will be (g - [tex]a_{0}[/tex). Therefore, the time period T is given by: T = 2π√(l / (g - [tex]a_{0}[/tex)). When the elevator is moving with a uniform velocity, the acceleration due to gravity on the pendulum remains the same as that at rest. Therefore, the time period T is given by the formula: T = 2π√(l / g). In summary, the time period of a simple pendulum in an elevator depends on its length, the acceleration due to gravity at rest, and the acceleration or deceleration of the elevator.
Learn more about acceleration here :
https://brainly.com/question/12550364
#SPJ11
What is the ground-state energy of (a) an electron and (b) a proton if each is trapped in a one-dimensional infinite potential well that is 200 wide?
In a one-dimensional infinite potential well that is 200 wide, the ground-state energy of an electron and a proton can be calculated using the formula E = (n²h²)/(8mL²), where n is the quantum number, h is the Planck constant, m is the mass of the particle, and L is the width of the well.
For an electron trapped in a one-dimensional infinite potential well, we can use the mass of an electron (me = 9.10938356 x 10^-31 kg) and the width of the well (L = 200 m) to calculate the ground-state energy. The quantum number for the ground state is n = 1.
Substituting these values into the formula E = (n²h²)/(8mL²), where h is the Planck constant (h = 6.62607015 x 10^-34 J·s), we find E = (1² * (6.62607015 x 10^-34 J·s)²) / (8 * 9.10938356 x 10^-31 kg * (200 m)²). Evaluating this expression yields the ground-state energy of the electron.
Similarly, for a proton trapped in the same one-dimensional infinite potential well, we use the mass of a proton (mp = 1.67262192 x 10^-27 kg) and the width of the well (L = 200 m). Since protons are much heavier than electrons, the ground-state energy will be significantly lower.
By substituting the appropriate values into the formula E = (n²h²)/(8mL²), we can calculate the ground-state energy of the proton.
It is important to note that the ground-state energy obtained represents the lowest possible energy level for the particle in the given potential well.
Learn more about Planck constant here :
https://brainly.com/question/2289138
#SPJ11