the weight of an object on earth varies inversely as the square of its distance d from the center of the earth. if a pilot weighs 175 lbs at sea level on earth (approx. 6400 kilometers from the center of the earth), how far above the earth must the pilot fly in order to weigh 150 lbs?

Acceleration is defined as a change in velocity over time. Therefore, an acceleration in the positive direction means that the velocity of the moving object is increasing, which means it is speeding up.

The direction usually refers to a course or path of action that one should follow. It is a guide that outlines the steps that should be taken and the goals that should be achieved. Direction can be used to point an individual in the right direction and help them to reach their goals. Direction can also be used to provide guidance and motivation, allowing an individual to stay on track and make progress towards their desired outcome. Direction can come in many forms, such as instructions, advice, and guidance from mentors, peers, or mentors. It is important to seek out the right direction and to adjust when needed to ensure that one is able to achieve the desired outcome.

To learn more about direction

https://brainly.com/question/29598133

#SPJ4

The distance between the two charges is 3.12 m.

The distance between the two charges is determined by applying Coulomb's law of electrostatic force.

F = kq₁q₂ / r²

where;

The distance between the two charges is calculated as;

r² = kq₁q₂  / F

r = √ ( kq₁q₂  / F )

r = √ ( 9 x 10⁹ x 40 x 10⁻⁶ x 108 x 10⁻⁶ / 4 )

r = 3.12 m

Learn more about distance between charges here: https://brainly.com/question/27826314

#SPJ1

When a force is applied with an angle to the x-axis, equation for work done is W= F×d×Cosθ. Here the work done is found to be 5.1×10³ J.

Work done is the quantity of energy transferred to the body to change its position or state of rest or state of uniform motion. Here we are applying a force to move the object to a distance. The equation for work done = Force× displacement.

Here the force applied make an angle 23° with the x-axis. So, the work done is calculated using the equation

W = F·cosθ ×d

F= 120N, θ= 23°, d= 46m

W = 120×Cos(23)×46

   = 5.1×10³ J.

So to move the object to 46 m, by applying a force 120N with an angle 23° to horizontal axis, the work done is 5.1×10³ J.

For more information regarding Work done by force, kindly refer

https://brainly.com/question/16976412

#SPJ4

The relationship between the input force and the output velocity for a mass-spring system can be determined using the principle of linear systems.

For a linear system, the response of the system to a given input force is proportional to the input force.

m * d²×/dt² + kx = f(t)

where m is the mass, k is the spring constant, x is the displacement, and f(t) is the input force.

Taking the derivative of x with respect to time gives us the velocity, v(t), which can be substituted into the equation to give us:

m * d²v(t)/dt² + k ₓ dx/dt = df(t)/dt

So, the output velocity is proportional to the derivative of the input force. This means that the velocity of the system will increase as the rate of change of the input force increases. The proportionality constant between the input force and the output velocity is determined by the system's parameters (mass and spring constant).

It is important to note that this relationship holds only for linear systems and is only valid for small amplitude oscillations. For large amplitude oscillations or non-linear systems, this relationship may not hold.

To know more about  input force here

https://brainly.com/question/9145571

#SPJ4

Answer:

Aromatherapy uses the principle of olfactory stimulation, meaning it uses the sense of smell to affect the body and mind. Essential oils, which have distinct fragrances, are inhaled or applied topically to bring about physical and psychological benefits.

Answer: The basic principle of aromatherapy is to strengthen the self healing processes by indirect stimulation of the immune system.

Explanation:

When a car is stopped abruptly by an impact, the airbags are inflated.

An airbag is an inflatable safety device designed to protect the occupants of a car in case of a collision. The airbags are part of an occupant restraint system and are also referred to as air cushion restraint system. Airbags supplement the basic protection offered by seat belts.

When a car is stopped abruptly by an impact, all bodies or objects that are not firmly fixed to the car will continue to move at the impact speed. The sensors measure this acceleration and relay it to the control unit as usable data.

To know more about the airbags, here

brainly.com/question/29869944

#SPJ4

Yes, it shows that there was a steady flow medium present in the depositional environment (typically water or wind).

Examples include characteristics that can clearly identify the top or bottom of lava flows or sedimentary strata. Cross bedding, symmetric ripples, and graded bedding were some of the earliest sedimentary features to be used for way-up determination, with various sole marks only becoming relevant much later.

a sedimentary structure that develops in the lower flow regime, where sediment ridges align themselves with the flow direction, but inside the ridges, the sediment layers and dips in the direction of the flow.

To know more about steady flow visit:-

https://brainly.com/question/29561295

#SPJ4

The truck will take 378.04 seconds or about 6 minutes and 18 seconds, to complete one lap of the circular track with radius 600 m at the speed of 10.0 m/s.

The track is circular of radius of 600 m. So the total distance the truck has to cover will be the circumference of that circular track.

i.e. 2 × π × 600 m = 3780.4 m

The speed of the truck is 10 m/s.

So to cover the distance the truck will take,

Time = 3780.4 / 10.0 = 378.04 s = 6 minutes and 18 seconds.

So the truck will take 378.04 s or 6 minutes and 18 seconds to complete one lap.

So the truck will take 378.04 seconds or about 6 minutes and 18 seconds, to complete one lap of the circular track with radius 600 m at the speed of 10.0 m/s.

Learn more about speed:

https://brainly.com/question/848085

#SPJ4

A car of mass 1100 kg moves at 20 m/s the its stopping distance is 400m and 160 m.

Initial speed of the car is u.

Final speed of the car v = 0

Simply put, negative acceleration is a reverse acceleration. The velocity of the body may rise or fall. Acceleration is the term used to describe the change in velocity. The body experiences positive acceleration when its speed increases. Similar to this, as velocity falls, the acceleration turns negative and is known as negative acceleration.

Let the acceleration of the car be a.

Its stopping distance is 400m because s ∝ [tex]u^{2}[/tex] and s=400m by that form.

Using

[tex]v^{2} -u^{2}[/tex]= 2aS

0-u² = 2aS

s ∝ [tex]u^{2}[/tex] (for same a)

Now,

S = 40m u = 2u

[tex]\frac{S^{'} }{S} =\frac{u^{'2} }{u^{2} }[/tex]

[tex]\frac{S^{'} }{40} =4[/tex]

Then the distance will be,

S' = 160m

Learn more about distance

brainly.com/question/15172156

#SPJ4

Lightning and stars both contain plasma, which is a high-temperature ionized gas that contains free electrons and ions.

Plasma is a common state of matter in the universe and is found in stars, lightning, and other celestial bodies. Unlike solids and liquids, which have a fixed shape and volume, plasma has no fixed shape or volume and is highly influenced by electric and magnetic fields. In stars, the intense heat and pressure cause hydrogen and helium atoms to become ionized and form plasma, which sustains nuclear reactions that generate light and heat. In lightning, plasma is created by the ionization of air molecules due to the high-voltage discharge of electricity in a thunderstorm. Both lightning and stars have a significant impact on our lives and the universe around us.

Learn more about plasma:

brainly.com/question/18207038

#SPJ4

Kinematic relation between acceleration and velocities of a system consisting of two blocks named as a and b is g (m₂ - m₁)/(m₂ + m₁).

Utilizing the standard marking, let the more modest mass be m₂, and the bigger mass is m₁, and since the powers are just acting in the upward heading, we will involve the summation condition for the powers along the y-hub as it were.

It very well may be obviously seen that main two powers are following up on every one of the majority, that is to say, their own weight acting downwards and the pressure in the string acting upwards.Subsequently, the summation condition for powers on each mass can be composed utilizing the standard sign show, the vertical power is taken as certain, and the descending power is taken as negative.

T-m₁g = m₁a … . (1)

T-m₂g = - m₂a … . (2)

On settling (1) and (2) we get

a = g (m₂ - m₁)/(m₂ + m₁)

Where, T = Tension in the string, a = acceleration of the speed increase of two masses.

Hence,kinematic relation between acceleration and velocities is g (m₂ - m₁)/(m₂ + m₁).

To know more about acceleration,visit here:

https://brainly.com/question/28786308

#SPJ4

Answer:

Explanation:

The kinetic energy of a moving object is given by:

KE = (1/2)mv²

where KE is the kinetic energy, m is the mass of the object, and v is the velocity.

We can rearrange this equation to solve for the mass of the car:

m = 2KE / v²

Substituting the given values, we get:

m = 2(4.33 × 10^5 J) / (23 m/s)²

m = 2(4.33 × 10^5 J) / 529 m²/s²

m = 1.641 kg

Therefore, the mass of the car is approximately 1.641 kg.

Answer:

Explanation:

Sound, seismic, and electromagnetic waves transmit energy through different mediums due to the motion of particles in the medium.

Sound waves transmit energy through the vibration of particles in a solid, liquid, or gas. The energy is transferred from particle to particle as the wave travels through the medium.

Seismic waves are created by the sudden release of energy from earthquakes, volcanic eruptions, or other geological events. These waves travel through the Earth's solid mantle and crust, transmitting energy through the vibration of particles in the rock.

Electromagnetic waves are a type of wave that does not require a medium to travel through. They are created by the motion of charged particles, such as electrons, and can travel through a vacuum, such as space. Electromagnetic waves transfer energy through the oscillation of electric and magnetic fields.

The energy contained in a 1 m³ volume near the earth's surface due to radiant energy from the sun will be approximately equal to 5747.4 J.

The energy contained in a 1 m³ volume near the Earth's surface due to radiant energy from the Sun can be calculated. We can use the solar radiation energy flux formula for this.

Flux = I_s × (1 - α).

where, I_s can be the constant (solar constant) , α ⇒ alpha can be the fraction of solar radiation that is reflected by the Earth back.

Solar constant can be approximated as 1367 W/m² and like that alpha can also approximately the value of 0.3.

Now energy flux is equal to,

Flux = 1367 W/m² × (1 - 0.3) = 957.9 W/m².

To calculate the energy contained in a 1 m³ volume, multiply the energy flux by the volume's surface area. When the volume is a cube, the surface area is 6 times that of one face.

i.e. Energy = Flux × 6 × (1 m)² = 5747.4 W × 1 m²= 5747.4 J.

So, the energy contained in a 1 m³ volume near the earth's surface due to radiant energy from the sun will be approximately equal to 5747.4 J.

Learn more about radiant energy:

https://brainly.com/question/17049720

#SPJ4

The required work to pump all of the water over the side is calculated to be 24617600 J.

Density of water = 1000 kg/m³

Acceleration due to gravity = 9.8 m/s²

Depth of water h = 3.5 m

Area of pool of diameter d = 20 m

A = π(d²/4) = 3.14×20²/4 = 314 m²

Wall height of the pool = 4 m

Force on the bottom of the pool due to water = ρ g h A = 1000×9.8×2×314 = 6154400 N

Amount of work required to pump all of the water over the side is,

Work = F × h = 6154400 × 4 = 24617600 J

Thus, the work required to pump all of the water over the side is calculated to be 24617600 J.

The given question is incomplete. The complete question is 'i.pump all of the water over the side?'

To know more about work:

https://brainly.com/question/15904658

#SPJ4

According to "Handbook of Speed of The sound for Real Gases" from A Zuckerwar, propane seems to have a speed of sound of 258 m/s at standard temperature and pressure (STP).

The mechanical radiant energy, that acts as the real source of hearing, is perceived by the sense of hearing and is transmitted via horizontal pressure waves inside a material medium (such as air).

Sound is a type of energy produced by vibrations. The air molecules around a vibrating object move. By interacting with them, these molecules cause the vibration of molecules that are close by. They thus come across additional air molecules close by.

To know more about sound visit:

https://brainly.com/question/30045405

#SPJ4

Answer:

Explanation:

Work done = force x displacement

force = mass x acceleration (due to gravity)

work done =25 * 9.8 * 3 = 735J

Answer:

735 J

Explanation:

F (force) = ma = mg = 25kg × 9.81m/s² = 245.25N.

we are lifting, so the acceleration is going against Earth's gravity.

the work done to lift it up by 3 m is then

W = F×d = 245.25N×3 m = 735.75 J

the time (2 seconds) does not play a role here.

it would be needed to calculate the power needed to lift 25kg 3 m in 2 seconds :

power = W/t = 735.75/2 = 367.875 watts

No,light from the sun cannot cause the paper to change color.Light can only change things by warming them up , so it cannot cause the paper to change colour.

Light or apparent light is electromagnetic radiation that can be seen by the human eye.[1] Noticeable light is generally characterized as having frequencies in the scope of 400-700 nanometres (nm), relating to frequencies of 750-420 terahertz, between the infrared (with longer frequencies) and the bright (with more limited wavelengths).[2][3]

In physical science, the expression "light" may allude all the more comprehensively to electromagnetic radiation of any frequency, whether noticeable or not.[4][5] In this sense, gamma beams, X-beams, microwaves and radio waves are likewise light. The essential properties of light are power, proliferation bearing, recurrence or frequency range and polarization. Its speed in vacuum, 299792458 m/s, is one of the basic constants of nature.[6] Like a wide range of electromagnetic radiation, noticeable light proliferates by massless rudimentary particles called photons that addresses the quanta of electromagnetic field, and can be broke down as the two waves and particles. The investigation of light, known as optics, is a significant exploration region in present day material science.

Hence,answer is no.

To know more about light,visit here:

https://brainly.com/question/1478016

#SPJ4

The magnitude of the electric field inside the solid at a distance of 9.50cm from the center of the cavity 3,65 × 10^5. N/C

A point charge ,q = -2.14×10^-6 C is located in the center of a spherical cavity of radius , 6.55×10^-2 m inside an insulating spherical charged solid.

The charge density in the solid , d = 7.3×10^-4 C/m³

Distance from the center of the cavity,R =9.3×10^-2

A magnet is an object that can attract certain objects around it. Magnets affect the movement of metals through an intermediate medium called a magnetic field. Magnets can attract iron, steel, and other metals because they have a magnetic field at each pole. The greatest magnetic force of attraction lies at the two poles.

The magnetic field is an area where if a magnetic material is placed in it, the material will feel a magnetic force. So, the magnetic field is the area or space around the magnet that is still experiencing a magnetic force.

Learn more about magnetic field at https://brainly.com/question/23096032.

#SPJ4

Overall, Overall, Curiosity's observations have provided valuable insights into the Martian atmosphere and helped to improve our understanding of the Red Planet.have provided valuable insights into the Martian atmosphere and helped to improve our understanding of the Red Planet.

The rover need power to operate. Without electricity, it cannot move, use its scientific apparatus, or communicate with Earth. On Curiosity, a radioisotope power system generates electricity from heat created by the radioactive decay of plutonium.

Thin atmosphere: Curiosity's measurements of the Martian atmosphere have shown that it is much thinner than Earth's, with a surface pressure of only about 1% that of Earth's. This means that the atmosphere provides very little protection from the harsh radiation environment on Mars.

Seasonal changes: Curiosity has observed seasonal changes in the Martian atmosphere, with the amount of methane gas increasing and decreasing over the course of a Martian year. This could be a sign of active geological or biological processes on the planet.

Dust storms: Curiosity has observed and studied several dust storms on Mars. These storms can have a significant impact on the Martian atmosphere, causing changes in temperature, pressure, and the amount of sunlight reaching the surface.

To know more about Martian atmosphere visit:-

https://brainly.com/question/29483748

#SPJ4

Answer:

They both have the same GPH

Explanation:

GPE = mgh

m = mass of Claire

2m = mass of Jared

h = height of Claire

h/2 = height of Jared

GPE-jared = (2m)(g)(h/2) = mgh

GPE-claire = mgh

They both have the same GPH

Answer: Fluorine has seven valence electrons, so it is most likely to gain one electron to form an ion wit a 1- charge.

Explanation:

A fluorine atom can attract one additional electron to fill its outermost shell and achieve a stable electron configuration. This ability to attract electrons is due to fluorine's high electronegativity, which is a result of its small atomic size and high nuclear charge. The strong attraction between fluorine and electrons makes it highly reactive and capable of forming strong chemical bonds with other elements.

Atoms are composed of positively charged protons, negatively charged electrons, and neutral neutrons. The number of electrons in an atom determines its chemical properties, as the electrons are involved in chemical bonding. Some atoms have a tendency to attract additional electrons to fill their outermost electron shell, which can result in the formation of ionic or covalent bonds. Fluorine is one such atom that has a strong tendency to attract additional electrons due to its high electronegativity.

Fluorine is a highly electronegative element, meaning it has a strong tendency to attract electrons towards itself. This is due to its small atomic size and high nuclear charge, which results in a strong electrostatic attraction between the positively charged nucleus and the negatively charged electrons.

Fluorine has seven electrons in its outermost shell, which means it is only one electron short of having a full outer shell. This makes fluorine highly reactive, as it has a strong tendency to attract an additional electron to fill its outer shell and achieve a stable electron configuration. When fluorine attracts an additional electron, it forms a negative ion called fluoride.

The strength of fluorine's electronegativity can be quantified using a scale called the Pauling scale. Fluorine has the highest electronegativity of all the elements on the periodic table, with a Pauling electronegativity value of 4.0. This means that fluorine can attract electrons more strongly than any other element, making it highly reactive and capable of forming strong chemical bonds with other elements.

Here you can learn more about electronegativity

https://brainly.com/question/2060520#

#SPJ11

The dependent variable, depends on the size of a wire is Electrical Resistance. Option A is correct.

The dependent variable that depends on the size of a wire is Electrical Resistance. Electrical resistance is a measure of the degree to which an object opposes the flow of electrical current through it.

The resistance of a wire is determined by its size, shape, and composition, among other factors. In general, as the size of a wire increases, its resistance decreases, all other factors being equal. This is because a larger wire has more space for electrons to flow through, reducing the likelihood of collisions and increasing the flow of current. Therefore, electrical resistance is directly dependent on the size of a wire.

To know more about Dependent variable , here

brainly.com/question/1479694

#SPJ4

Answer:

Explanation:

because we have to get a measuremt.

To balance a 0.45 N weight 0.30 m to the right of the center, a 0.20 N weight must be placed 0.15 m to the left of the center.

To learn more  about equilibrium refer:

brainly.com/question/517289

#SPJ1

Race takes 14 seconds to complete.

We need to use the equation of motion:

d = vt

where d is the distance covered, v is the speed, and t is the time.

Let's assume that the hare covers a distance of x before it stops to rest, and the tortoise covers a distance of y in the same time. Since the hare is faster, it covers more distance than the tortoise before stopping to rest, so we can write:

[tex]x = 3.0 m/s * t[/tex]

[tex]y = 0.15 m/s * t[/tex]

After resting for 2.0 minutes or 120 seconds, the same as the distance the tortoise has to cover to win the race. Let's call this distance z.

We can write:

[tex]z = x - 0.35 m[/tex]

[tex]z = y[/tex]

[tex]3.0 m/s * t - 0.35 m = 0.15 m/s * t[/tex]

Solving for t, we get:

[tex]t = 14 s[/tex]

Therefore, the race takes 14 seconds to complete.

To know more about Equation of motion, here

https://brainly.com/question/24018491

#SPJ4

The strength and direction of the electric field around a dipole are important in many areas of physics and engineering, such as in the design of antennas, electromagnetic radiation, and molecular interactions.

What is the electrode?

It is typically made of metal or a conductive material such as carbon, and is connected to a source of electrical current. The electrode is then placed in a circuit, allowing electricity to flow from the source to the nonmetallic part of the circuit.

In a dipole, the electric field is the strongest (largest) at the poles or tips of the dipole and the weakest (smallest) at the equator or midpoint between the poles. The direction of the electric field at any point on the dipole is always along the line joining the two charges.

As you move from one electrode to the other, the magnitude of the electric field decreases as you move away from the poles towards the equator. At the poles, the electric field is proportional to the magnitude of the charges and the distance between them. At the equator, the electric field is zero because the electric fields from the two charges cancel each other out.

It's important to note that the electric field around a dipole also varies with distance from the dipole. The magnitude of the electric field decreases as you move further away from the dipole, following an inverse square law.

The strength and direction of the electric field around a dipole are important in many areas of physics and engineering, such as in the design of antennas, electromagnetic radiation, and molecular interactions.

To learn more about electrode

brainly.com/question/22582568

#SPJ4

The magnitude of the electric force on a protein with this charge in a 1700 n/c electric field is F = q * 1700 N/C

Coulomb's law may be used to calculate the amount of the electric force on a protein with a particular charge in an electric field. According to Coulomb's law, the force between two charged particles is equal to the product of their charges and inversely proportional to the square of their distance. The force on a charged particle in an electric field is expressed as follows:

F = q * E, where q is the charge on the protein and E is the intensity of the electric field. The strength of the electric field is specified as 1700 N/C. Coulombs are the unit of charge (C).

As a result, the size of the protein's electric force may be estimated as follows:

F = q * E

 = q * 1700 N/C

The force will be directed in the direction of the electric field. If the protein's charge is positive, the force will be directed in the same direction as the electric field. If the protein has a negative charge, the force will be in the opposite direction as the electric field.

It's vital to remember that the electric force on a protein is affected by its size, shape, and charge. Other parameters, such as the dielectric constant of the surrounding medium, may impact the electric force on a protein in some situations.

For more such questions on Electric field, click on:

https://brainly.com/question/28027633

#SPJ4

The speed of the turtle, Adel is 0.2 feet per minutes.

Speed is distance travelled by the object per unit time. Due to having no direction and only having magnitude, speed is a scalar quantity With SI unit meter/second.

Distance travelled by the turtle, Adel is = 10 feet

Time taken by the turtle is = 50 minutes.

Now we know that

speed = distance travelled ÷ time interval

Hence, the speed of the turtle is = 10 feet ÷  50 minutes.

= 0.2 feet per minutes.

Hence, the speed of the turtle, Adel is 0.2 feet per minutes.

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ1

The required density of the oil when pressure at the base and depth of the container are given is calculated to be 815.5 kg/m³.

We know the expression for pressure as, P = ρ g h

where,

ρ is density

g is acceleration due to gravity

h is height

Here, h is nothing but the depth of the cylindrical container.

h = 32 cm = 0.32 m

Pressure exerted is given as 2560 pa. P = 2560 pa

To find out density, make ρ as subject in the above equation.

ρ = P/(g h) = 2560/(9.8 × 0.32) = 815.5 kg/m³

Thus, the required density of the oil is calculated to be 815.5 kg/m³.

To know more about pressure:

https://brainly.com/question/13257918

#SPJ4