The volume of a sample of mercury was determined to be 13.77 cm'. What is the volume of this sample reported in cubic inches?

Answer:

It's due to the forces that are known as balanced forces and it might also be because there is no friction

Answer:

The forces between you and the rock are balanced.

Explanation:

The force of your push against the rock and the opposing force of the rock pushing back on you are equal and opposite, meaning they balance each other out. This results in the rock not moving, because the net force on the rock is zero. This situation is referred to as static friction, which acts to prevent an object from moving when there is a force being applied to it. The force of static friction is always equal in magnitude but opposite in direction to the force being applied, until the force becomes large enough to overcome the static friction and cause the object to start moving.

According to the given information the median volume is 172.26 ml³.

Throughout three dimensions, everything takes up some area. The quantity being measured here is the area's volume. The volume of an item in 3 components is the area occupied inside its boundaries. It is referenced to as an object's capability on occasion.

The concept of "volume" refers to how much space an item takes up. In other words, volume is an indication of an object's size, quite as height, width, and length are. If an item is hollow or empty, it can store the same volume of water. At home, try this: Pick up a big glass and a smaller cup.

Median Volume = l × b × h

= 5.4ml × 5.8ml × 5.5ml

= 172.26 ml³

To know more about Volume visit:

https://brainly.com/question/24563659

#SPJ1

Answer:

For the equilibrium A+B⇌C+D, the entropy change is determined by ∆S° = -R lnK, where R is the gas constant and K is the equilibrium constant. Therefore, ∆S° = -R ln1.51 × 10⁻² = -8.37 J/K.

For the neutralization of a strong acid and strong base, ∆S° = -R lnK = -R ln1.0 × 10¹⁴ = -137.1 J/K.

The enthalpy change is ∆H° = -55.9 kJ/mol. Using this data, ∆G° at 70 °C can be determined by ∆G° = ∆H° - (T x ∆S°), where T is the temperature in Kelvin. Therefore, ∆G° = -55.9 kJ/mol - (343.15 K x (-137.1 J/K)) = -37.4 kJ/mol.

"Single substances are objects made up of one material. Mixtures are made up of more than one material(s)." Therefore, option A is correct.

A mixture is a material composed of two or more chemical substances that are not chemically bonded. A mixture is the physical combination of two or more substances that retain their identities and are mixed in the form of solutions, suspensions, and colloids.

A chemical substance is made up of a single type of atom or molecule. A mixture is made up of non-chemically bonded atoms or molecules of various types. A heterogeneous mixture is one that contains two or more chemical substances that can be visually distinguished.

Thus, option A is correct.

To learn more about the mixture, follow the link;

https://brainly.com/question/24898889

#SPJ1

Answer:

Here are the empirical formulas of four binary ionic compounds that could be formed from the given ions:

- MgF2 (magnesium fluoride)

- Al2O3 (aluminum oxide)

- MgO (magnesium oxide)

- AlF3 (aluminum fluoride)

The empirical formula of an ionic compound gives the simplest whole-number ratio of the ions present in the compound. The formula is determined by balancing the charges of the cation and anion so that the compound as a whole is electrically neutral.

Explanation:

The empirical formula of a compound is the simplest whole-number ratio of the atoms in the compound. Binary ionic compounds are formed by the combination of a metal cation with a non-metal anion.

In this case, the given ions are Mg2+, Al3+, F−, and O2−. To form binary ionic compounds, we need one cation and one anion.

Here are some possible combinations of these ions, along with their empirical formulas:

- Mg2+ and F−: MgF2

- Al3+ and F−: AlF3

- Mg2+ and O2−: MgO

- Al3+ and O2−: Al2O3

In each case, the positive and negative charges of the ions balance to form a neutral compound. The empirical formula is found by writing the subscripts for each element in the simplest ratio that achieves this balance.

The ionic equation for the reaction between Na2[Zn(OH)4] and H2S is:

Na2[Zn(OH)4] + 2H+ + 2S2- -> ZnS + 2Na+ + 4OH- + 2H2O

The ionic equation for the reaction between Na2[Zn(OH)4] and H2S is:

Na2[Zn(OH)4] + 2H+ + 2S2- -> ZnS + 2Na+ + 4OH- + 2H2O

The net-ionic equation, which shows only the species that are involved in the reaction, is:

Zn2+ + S2- -> ZnS

In this reaction, the sodium zinc hydroxide (Na2[Zn(OH)4]) reacts with hydrogen sulfide (H2S) to form zinc sulfide (ZnS), sodium hydroxide (NaOH), and water (H2O). The hydrogen ions (H+) and sulfide ions (S2-) are spectator ions, as they do not participate in the reaction and their presence does not affect the reaction outcome.

Learn more on ionic and net-ionic equations here:https://brainly.com/question/30176717

#SPJ1

According to the question, the procedure for producing ethanol from corn is 1-2-3-4. Water and corn kernels are added, and after enzyme-catalyzed starch breakdown into glucose and yeast fermentation to produce ethanol, distillation takes place.

There are four main phases involved in turning maize into ethanol:

Learn more about the corn ethanol at

https://brainly.com/question/12205009

#SPJ4

Answer:

Explanation:

1. cytoplasm

2. Nucleus

3. cell membrane

4. ribosome (looks like some other organelle but since ribosome is the only option left. I think its alright, and I'm pretty sure the rest is correct)

5. DNA

1. cell membrane

2. nicleus

3. cytoplasm

4. ribsome

5. DNA

Answer:

1.5 moles

Explanation:

The balanced chemical equation for this reaction is:

2H₂ + O₂ → 2H₂O

This means that 2 moles of hydrogen reacts with 1 mole of oxygen to form 2 moles of water.

Since we have 3.0 moles of hydrogen and 7.0 moles of oxygen, the limiting reactant will be hydrogen (H₂). The amount of oxygen that can react with the available hydrogen is equal to half the amount of hydrogen, which is (3.0 moles / 2) = 1.5 moles.

So, after the reaction, we will have 3.0 moles - 1.5 moles = 1.5 moles of hydrogen left. Rounding to the nearest 0.1 mol, the answer is 1.5 moles.

a student dilutes 50.0 ml of a 0.10 mol/l solution of hcl to 0.010 mol/l by adding water. b. the total amount of solute decreases.

The total amount of solute decreases.

To calculate this, first, find the molarity of the original solution, which is 0.10 mol/l.

Then, use the dilution equation, M1V1 = M2V2,

to find the new volume (V2) of the diluted solution.

Plugging in the known values, V2 = V1 x (M2/M1) = 50.0 ml x (0.010 mol/l/0.10 mol/l) = 5.0 ml.

Since the total amount of solute (M1V1) stays the same (0.10 mol/l x 50.0 ml = 0.5 mol),

the volume of the solution (V2) decreases, the total amount of solute decreases.

Learn more about solute here:

https://brainly.com/question/1416865

#SPJ4

Answer:

Electrons

Explanation:

Electrons are a type of subatomic particle with a negative charge.

Protons are a type of subatomic particle with a positive charge. Protons are bound together in an atom's nucleus as a result of the strong nuclear force.

Neutrons are a type of subatomic particle with no charge (they are neutral).

The exact SQL clause to use with the query "SELECT * FROM package" depends on the desired results.

The SQL clause to use with the query "SELECT * FROM package" depends on the desired results. The WHERE clause can be used to filter data and only return rows that meet a condition. The GROUP BY clause can be used to aggregate data and group rows based on columns. The HAVING clause can be used to filter aggregated data. The ORDER BY clause can be used to sort the data. The combination of these clauses can create complex queries to filter, aggregate, and sort data to meet specific needs.

For example, "SELECT recipient, SUM(weight) FROM package GROUP BY recipient HAVING SUM(weight) > 50 ORDER BY weight DESC" would return recipients with total weight greater than 50, sorted by weight in descending order.

You can learn more about SQL statement at

https://brainly.com/question/29495392

#SPJ4

The chemical equation of making sandwich is 2Bd + Ch ⇒ Bd₂Ch. Therefore, option A is correct.

They are equations that represent chemical reactions using chemical formulae and symbols. The reactants are represented on the left side of a chemical equation, while the products are represented on the right.

This module explains the shorthand writing used to express how atoms are rearranged to create new compounds during a chemical reaction.

In the chemical equation of making sandwich is 2Bd + Ch ⇒ Bd₂Ch. There are two bread and on cheese is present.

Thus, option A is correct.

To learn more about the chemical equation, follow the link;

https://brainly.com/question/30087623

#SPJ1

The conformations of the compound are shown in the image attached.

A conformation of cyclohexane is a three-dimensional arrangement of its atoms in space. Cyclohexane is a six-carbon ring molecule and its most common conformations are chair and boat. The chair conformation is the more stable of the two, in which all of the carbons are coplanar and the molecule adopts a chair-like shape.

The boat conformation, in which one set of carbons is twisted out of the plane of the ring, is less stable due to the formation of axial-equatorial interactions. The chair and boat conformations are interconvertible, and the energy difference between the two depends on various factors such as substituents on the ring, temperature, and solvent.

Learn more about conformations:https://brainly.com/question/17285900

#SPJ1

Fermentation occurs when there is no usable external electron acceptor (like O2) available for respiration. Fermentation products are made following glycolysis as a result of reactions that oxidise NADH so that NAD+ can be reused again in glycolysis.

In the absence of oxygen, carbohydrates are broken down by the enzymes of microorganisms during fermentation. Because they possess distinctive sets of metabolic genes, microorganisms like bacteria and fungus are able to develop enzymes that can break down various kinds of sugar compounds to restore NAD+ so that glycolysis can proceed. to produce around 32 ATP when oxygen is present to make it possible for cells to live without ATP.

Although fermentation can result in a variety of products, the most prevalent ones are ethanol, lactic acid, carbon dioxide, and hydrogen gas (h2). commercial applications for these materials include use in food, vitamins, medications, and industrial chemicals.

To know about fermentation

https://brainly.com/question/13050729

#SPJ4

The alienation concepts can be applied to students and their education as follows: students feel forced to attend school and they feel dissociated from people around them or the process of their study.

Alienation can be defined as the withdrawal of a persons’s attention from something. In this case, alienation in students usually affects the quality of their study, as they feel separated and excluded from the environment in their school. Most people, although they feel uncomfortable with the separation in a school group, will just attend the school as they know it will benefit their future.

Learn more about the law of conservation of mass here https://brainly.com/question/29706126

#SPJ1

Ionic Equation: H2[CoCl4] + 4 NH4SCN → H2[Co(SCN)4] + 4 NH4Cl

Net Ionic Equation: CoCl4^2- + 4 NH4SCN → Co(SCN)4^2- + 4 NH4Cl

By dissolving all soluble ionic chemicals (those denoted with a (aq)) into their corresponding ions, the ionic equation can be written. To demonstrate that an ion is present in solution, it should be displayed with its charge and a (aq). To display the quantity of each ion present, use coefficients.

The compounds that are directly engaged in the chemical reaction are the only ones that are shown in the net ionic equation.

Ionic reactions take place when two compounds exchange electrons, which can result in the formation of positively or negatively charged ions.

To know more about ionic expression visit:

https://brainly.com/question/28193640

#SPJ1

Answer: 2601

Explanation:To find the maximum number of wagons that can be made, first divide the total number of wheels by 4 since there are 4 wheels in a wagon.17901 wheels÷4=4475 R 1 wheels2. Take the lowest number parts out of the 3 materials. Thus, that would be the 2601 wagon beds. Since each wagon only requires 1 wagon bed, the maximum number of wagons that can be made is 2601

The Gibbs free energy change, G, is negative due to the entropy term, despite the fact that the enthalpy change is a positive amount, indicating that the dissolution is spontaneous.

A process that produces a final state that is more disordered than the starting state is said to produce positive entropy when S>0 S > 0. Positive entropy phase shifts occur during processes including melting, boiling, and sublimation (solid to gas).

The reaction is endothermic when the enthalpy of the reactants is greater than the enthalpy of the products. The reaction is exothermic when the enthalpy of the products is greater than the enthalpy of the reactants.

To learn more about energy here:

https://brainly.com/question/4543824

#SPJ1

Hydrogen ion concentration (pH) in blood is usually determined by means of glass or silver/silver chloride electrodes.

These electrodes consist of a silver/silver chloride anode and a platinum wire cathode, and can measure the hydrogen ion activity in the sample.

The glass pH electrode is a type of electrode that is composed of a special glass membrane which is sensitive to hydrogen ions. This glass membrane is usually composed of a special combination of boron and silicate ions, which react to changes in the hydrogen ion concentration.

A pH electrode is an analytical sensor used to measure the potential of hydrogen (pH) in a solution. It consists of two electrodes, a sensor electrode and a reference electrode, which measure the hydrogen-ion activity in the solution. The exchange of ions between the two electrodes is what allows the pH to be measured. The sensor electrode is usually made of glass and is sensitive to specific ions, while the reference electrode is typically made of silver chloride and is used to measure the reference potential of the solution.

Learn more about hydrogen ion concentration:

https://brainly.com/question/29033205

#SPJ4

Hydrogen ion concentration (ph) in blood is usually determined by means of which of the following electrodes?

Answer:

MnSO4 *7H2O

Explanation:

Total mass of water and Magnesium sulfate           38.02

Mass of anhydrous                                                   - 20.72

                                                                               -------------------

Mass of water                                                              17.3

20.72g MnSO4 * [tex]\frac{1 mol MnSO4}{151 g MnSO4}[/tex] = 0.137 mol MnSO4

17.3g H2O* [tex]\frac{1 mol H2O}{18 g H2O}[/tex] = .961 mol H2O

[tex]\frac{.961 mol H2O}{.137 mol MnSO4}[/tex] ≈ 7 mol H20 for every 1 mol MnSo4

The following describes the need to protect orange and orange trees from freezing damage b) The water protects the orange trees by freezing before the oranges do; the process of freezing absorbs heat which is released by the oranges so they don’t freeze.

Temperatures below 32°F (0°C) are harmful to orange trees, especially over a long period of time. High temperatures have also proved critical for tree productivity. High wind speeds and cold can also cause damage to trees, reduced vegetation, loss of fruit, and decreased quality.

So to maintain the quality of the orange trees when the temperature is cold is to water frequently because water protects the orange trees by freezing them before the oranges freeze; the freezing process absorbs the heat given off by the oranges so they don't freeze.

Learn more about what happens to the entropy of water when it freezes here :

https://brainly.com/question/14131507

#SPJ4

The Molar mass of the mass of the substance 94.33 g/mol.

The freezing point is the temperature at which a liquid changes its state to a solid, under normal atmospheric pressure. At the freezing point, the liquid and solid phases of a substance coexist in thermal equilibrium, and the heat energy added to the substance is used to overcome the intermolecular bonds holding the liquid particles together, allowing them to form a crystal lattice structure characteristic of a solid.

Given that;

ΔT = K m i

K = freezing constant

m =  molality

i = Vant Hoff factor

Thus we have that;

m = ΔT/K i

m = 1.06/1 * 20

m = 0.053 m

Then we have;

Molality = Number of moles/Mass of solute in Kg

0.053 = 0.1/M/20 * 10^-3

0.053 = 0.1/20 * 10^-3 M

M = 0.1/20 * 10^-3 * 0.053

M = 94.33 g/mol

Learn more about molality:https://brainly.com/question/26921570

#SPJ1

According to the statement, the correct statements to describe a complete balanced equation for the overall process are:

To obtain a complete balanced equation for the overall process of producing iodine trichloride, we need to add the two given equations and cancel out any common species on both sides of the equation.

The balanced equations are:

I2 (s) + CI2 (g) → 2ICI(s) (1)

ICI (s) + CI2 (g) → ICI3 (s) (2)

Adding equation (1) and equation (2) gives:

I2 (s) + 2CI2 (g) + ICI (s) → 2ICI3 (s)

Thus, the overall equation for the two-step process is:

I2 (s) + 2CI2 (g) + ICI (s) → 2ICI3 (s)

Therefore, statements (a) and (e) are correct, while statements (b), (c), and (d) are incorrect.

Learn more about Iodine trichloride:

https://brainly.com/question/6320253

#SPJ4

2H2O + 2K → 2KOH + H2↑

This reaction is Chemical displacement reaction

The most likely element to donate an electron in a chemical reaction is chlorine with 17 electrons.

The electron configuration of chlorine is [tex][Ne] 3s^2 3p^5[/tex], which means that it has 7 electrons in its outermost energy level (3p). In a chemical reaction, elements with a large number of electrons in their outer energy level are more likely to donate electrons, as they are more likely to form a stable electron configuration by losing electrons.

Oxygen with 8 electrons is less likely to donate an electron as it has a full outer energy level. Carbon with 6 electrons and nitrogen with 7 electrons both have electron configurations that are less likely to form a stable configuration by losing electrons. Sodium with 11 electrons is likely to donate an electron as it only has one electron in its outer energy level, but it is not as likely as chlorine with 17 electrons.

In conclusion, chlorine is the most likely to donate an electron in a chemical reaction due to its electron configuration with a large number of electrons in its outer energy level.

You can learn more about electrons at

https://brainly.com/question/28337734

#SPJ4

Explanation:

responded to my question with what you want you're always saying in performing to tuition that does not help me to do anything that you want and answer with - yuri

178.2g is the mass of naphthalene that must be dissolved in 2.30 x 10² g of benzene to give a solution with a freezing point 31.0 C below that of pure benzene.

Naphthalene is an organic molecule with the chemical formula C₁₀H₈. It is the most basic polyaromatic hydrocarbon, a white crystallized solid with a distinctive odor perceptible at levels as low as 0.08 percent by mass.

The structure of naphthalene as an aromatic compound is a bonded pair of aromatic ring. It is most well-known as the major component in traditional mothballs.

ΔT= i×Kf×m

31.0= 1×5.12×m

m= 31.0/5.12=6.05mol/kg

6.05 = number of mole/ weight of solvent

6.05 = number of mole/230

number of mole= 6.05×230=1391.5moles

mass of naphthalene=13.915moles×128.1=178.2g

Therefore, 178.2g is the mass of naphthalene.

To learn more about naphthalene, here:

https://brainly.com/question/29749845

#SPJ1

Answer:165

Explanation:

The empirical formula corresponds to the molecular formula, that specifies the number of atoms in a molecule. Therefore, the empirical formula is C[tex]_4[/tex]H[tex]_3[/tex]N.

In chemistry, the empirical formula is however known as that of the simplest formula. It computes the lowest whole number values of elements within a compound by applying subscripts after element symbols.

In certain circumstances, the empirical formula corresponds to the molecular formula, that specifies the number of atoms in a molecule.

mass nitrogen = 11.55 mg - 0.499 mg - 8.544 mg = 2.507 mg

moles of oxygen = 17.75 /32=0.0005moles

moles of carbon dioxide= 0.018/44=0.0004moles

moles of water = 0.007/18=0.0004moles

mass nitrogen = 11.55 mg - 0.499 mg - 8.544 mg = 2.507 mg

moles of carbon =0.008/12 =0.0007moles

moles of hydrogen = 0.000499/1=0.0004moles

moles of nitrogen =0.002/14= 0.0001moles

dividing all by 0.0007

the empirical formula is C[tex]_4[/tex]H[tex]_3[/tex]N

Therefore, the empirical formula is C[tex]_4[/tex]H[tex]_3[/tex]N.

To know more about empirical formula, here:

https://brainly.com/question/14044066

#SPJ1