The volume of 1 drop of medicine is 1.77 mL.what is the volume in deciliters of 100 drops of medicine? Write your answer as a decimal

Answers

Answer 1

The volume in deciliters of 100 drops of medicine is calculated as 1.77 deciliter.

What do you understand by the term deciliter?

Deciliter is a metric unit of capacity which is equal to ¹/₁₀ liter.

Some medical tests report result in grams (g) per deciliter (dL). Gram is equal to the weight of one milliliter or 16 drops of water which is around 1/30 of an ounce. Deciliter measures fluid volume equal to 1/10 of liter. A liter is a little bigger than quart of a fluid.

Given 1drop of medicine =1.77 ml

So, 100drops=177 ml

As, 1ml=0.01 dl

Hence, 177 ml=1.77 deciliter.

To know more deciliter drops of medicine, refer

https://brainly.com/question/29801355

#SPJ1


Related Questions

Indicate the molecu lar geometry around the central atom of each of the following species: CF4 Select NCI3 [Select) So2 [Select] the silicon atom in disilane (Si is bonded to Si) SisHe Select the carbon atom in urea (NH2)>CO (C is bonded to O, N and N) [Select]

Answers

Each of the following species has a tetraherdal, trigonal pyramidal, bent, tetraherdal, or trigonal planar molecular geometry centered on the central atom.

What is an example of an atom definition?

An atom is the fundamental unit of chemistry. It is the tiniest portion of matter where electric charges particles might escape. It is really the small material with properties resembling chemical elements.

What makes it an atom, and why?

But when it refers to the name atom, we must travel back to 400 B.C. ancient Greece. This Greek word atomos, meaning meaning "uncuttable," was proposed by Democritus, a renowned philosopher. As a result, as he stated, all substance might be reduced to discrete, tiny pieces, called atomos.

To know more about Atom visit:

https://brainly.com/question/26952570

#SPJ4

What compound exhibits only two signals in its 1H NMR spectrum, a triplet and a quintet? A) BrCH2CH2CH2Br B) BrCH2CH2CH2C C) (CH3)2CHCH(CH3)2 D) CH3CH2CH2CH3 E) (CH3)2CHOCH(CH32

Answers

BrCH2CH2CH2Br exhibits only two signals in its 1H NMR spectrum, a triplet and a quintet.

What is NMR spectrum?

Nuclear magnetic resonance spectroscopy, often known as NMR spectroscopy or magnetic resonance spectroscopy, is a spectroscopic method used to study the magnetic fields around atomic nuclei. Nuclear Magnetic Resonance Spectroscopy is an abbreviation for Nuclear Magnetic Resonance Spectroscopy. The study of molecules using nuclear magnetic resonance (NMR) spectroscopy involves recording the interaction of radiofrequency (Rf) electromagnetic radiations with the nuclei of molecules put in a high magnetic field. Nuclear magnetic resonance spectroscopy (NMR spectroscopy) or magnetic resonance spectroscopy (MRS) is a spectroscopic method used to study the magnetic fields around atomic nuclei.

Here,

BrCH2CH2CH2Br's 1H NMR spectrum contains just two signals, a triplet and a quint.

To know more about NMR spectrum,

https://brainly.com/question/29389817

#SPJ4

(E)-1,2-dibromo-3-isopropyl-2-hexene Draw the molecule on the canvas by choosing buttons from the Tools (for bonds), Atoms, and Advanced Template toolbars. The single bond is active by default.

Answers

Image of (E)-1,2-dibromo-3-isopropyl-2-hexene is shown as in the diagram.

What is meant by stereochemistry?

In organic chemistry, structure is not the only thing that matters because  the positions of the groups are also very important. This is because, stereochemistry of the compound can be used to determine if the compound is susceptible to certain reaction or not.

Stereochemistry is a subdiscipline of chemistry that involves the study of the relative spatial arrangement of atoms that form the structure of the molecules and their manipulation.

Stereochemistry is the study of three‐dimensional structure of molecules. The cis and trans isomers are forms of stereoisomers, differing in structure only in the location of atoms of the molecule in three‐dimensional space.

To know more about stereochemistry, refer

https://brainly.com/question/13266152

#SPJ4

Complete the following roadmap for calculating the molality of a solution from mass of solute X - multiply by volume of solvent (L) - mulliply by mass ol solvent (kg)
- multiply by molar mass of X (glmol) - multiply by density of X (glmL) - divide by volume of solvent (L) - divide by density of X (glmL) - divide by mass of solvent (kg)
- multiply by molarity of X (Movl)
- divide by molar mass ol X (glmol)
- divide by molarity of X (moVL) mass(g) of X ...|...
amount(mol) of X
...|....
molality(m) of X solution

Answers

The molality of a solution is defined as the number of moles of a solute per kilogram of solvent. It depends on the mass of the solvent. It is denoted by m. It is also called Molal Concentration.

What is Molality?

Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in litres, is the most widely used unit to express solution concentration: litres of solution/moles of solute equals M.

The following equation can be used to determine the molality: m = (Number of moles of the solute)/ (Mass of the solution in litres.) Molality is measured in kg/mol. The terms molality and molal concentration are interchangeable. The equation for calculating molality,

m = (Moles of the Solute, in Number)/ (Mass of the solution in litres.)

Molality is measured in kg/mol.Molality has an advantage over molarity in that it is unaffected by changes in temperature and pressure because it is determined based on mass rather than volume. 

To learn more about Molality refer to:

https://brainly.com/question/24065939

#SPJ4

if pressure of a gas sample is quadrupled and the absolute temperature is doubled what factor does the volume of the sample change

Answers

To determine the volume factor change, we must make V2 the focus of the equation. Therefore, the volume factor change is (c) 1/2.

If the temperature rises four times, how will the pressure change?

As the Kelvin temperature increases, the pressure increases. Direct proportionality governs the connection between the two sums.

When the temperature in Kelvin increases, the pressure of the gas will increase fourfold.

What is the fourth power of the absolute temperature?

According to the Stefan-Boltzmann law, an object's total radiant heat production .

and absolute temperature are inversely related.

Learn about the Boltzmann Law.

Visit

https://brainly.com/question/14677904

#SPJ1

2-hexyne will produce a single product upon mercury(ii)-catalyzed hydration.
A. True
B. False

Answers

I believe the statement s False

This energy diagram shows the allowed energy levels of an electron in a certain atom or molecule: Use this diagram to complete the table below.

Answers

The atom's ground state is A. There are two levels of excitement. The wavelength with the shortest transition is A to B. B - C is the transition with the longest wavelength.

A diagram of energy is what?

It is possible to see the progression of a chemical process using an energy diagram. The energy disparity between the reactants and products of a process is better understood with this graphic. Additionally, it shows how energy rises as the active compound develops.

What use do energy graphs serve?

An energy diagram, which illustrates how the potential energy of the starting state and the potential energy of the end state relate to one another, can be used to depict a physical or chemical process.

To know more about energy diagram visit:

https://brainly.com/question/12078312

#SPJ4

Atoms X, Y, Z, and R have the following nuclear compositions: Which two are isotopes?

Answers

Atoms X, Y, Z, and R have the following nuclear compositions. In the following nuclear compositions The isotopes are 410186 X and 412186 Z.

In this case, 186 is an atomic number shared by both isotopes. Isotopes are elements that share the same atomic number but have different mass numbers. Isotopes are atoms of the same element with the same number of protons but a different number of neutrons in their nucleus. This means that while isotopes of the same element have the same atomic number, they have different atomic masses. Isotopes are chemically identical because an element's chemical properties are determined by the number of protons in its nucleus (atomic number). Isotopes, on the other hand, can have varying physical and nuclear properties, such as decay rate, melting point, and stability.

Learn more about atomic masses here:

https://brainly.com/question/17067547

#SPJ4

The complete question is :

Atoms X, Y, Z, and R have the following nuclear compositions: Which two are isotopes?

410 X 186, 410 Y 183, 412 Z 186, 412 R 185

On the diagram of the nitrogen cycle, which number represents nitrite (NO2)?
A) 1
B) 2
C) 3
D) 4

Answers

On the diagram of the nitrogen cycle, option C number 3 represents nitrite (NO2)

The Nitrogen Cycle is the process by which nitrogen is converted between its various forms, such as nitrogen gas, ammonia, nitrite, and nitrate, in the environment. Nitrogen gas makes up 78% of the Earth's atmosphere, but it is not readily available to most living organisms in that form. The Nitrogen Cycle involves several key steps, including nitrogen fixation, nitrification, and denitrification. Nitrogen fixation is the process by which nitrogen gas is converted into ammonia by nitrogen-fixing bacteria. Nitrification is the process by which ammonia is converted into nitrite and nitrate by nitrifying bacteria.

Learn more about  Nitrogen Cycle here:

https://brainly.com/question/24046879

#SPJ4

Identify the indicated glycosidic linkages in the blood group B saccharide that is drawn below.

Answers

The disacharide has a beta 1,4 glycosidic bond as its type of connection. Disaccharides have two different kinds of glycosidic linkages: alpha 1,4 glycosidic bonds and beta 1,4 glycosidic bonds.

What is a glycosidic linkage, for instance?

The term "glycosidic linkage" describes the connection made between two monosaccharide units via an oxygen atom following the removal of a water molecule. For instance, the sucrose molecule contains a glycosidic bond that connects the two monosaccharide units, -glucose and -fructose.

What kinds of links contain glycosidic molecules?

There are two different kinds of glycosidic bonds: 1,4 alpha and 1,4 beta. When the carbon-1's OH is below the glucose ring, 1,4 alpha glycosidic bonds form, and 1,4 beta glycosidic bonds,

To know more about glycosidic linkages visit:

https://brainly.com/question/28459643

#SPJ4

Part A How many of the following molecules contain at least one pi bond? C2H6. Cl 2 CO, C2 Cl 4, HCN O 4
O 1
O 2
O 0
O 3

Answers

2 – C2H6 and HCN O 4 contain at least one pi bond.

What is molecules?

Molecules are the smallest unit of any chemical element or compound that has the properties of that substance. They are made up of atoms bonded together in various combinations, and have a definite chemical structure and composition. Molecules can be made up of single atoms, such as oxygen (O2), or of different types of atoms, such as water (H2O). Molecules are the building blocks of all matter, and are the basis of all living and non-living things.

C2Cl4 and Cl2CO do not contain any pi bonds. Pi bonds are formed by the overlap of atomic orbitals between two atoms. C2H6 and HCN O 4 contain double bonds between the atoms, which are made up of pi bonds. C2Cl4 and Cl2CO do not have any double bonds, so they do not contain any pi bonds.

To know more about molecules click-
https://brainly.com/question/26044300
#SPJ4

classification of matter: after a series of chemical analysis, it was determined that an unknown sample contains three types of atoms, a, b and c. atoms a and b are found to be bound together in the sample, where as atom c is by itself. th unknown sample is also partly gas, and partly solid, with the solid containing a and b.

Answers

The correct option is Option A - A Heterogeneous mixture

As it is given that the sample is partly gas (made up of C) and partly solid (made up of A & B), the unknown sample may be a heterogenous mixture (gas C + solid A-B), like smog (smoke + fog).

Chemically speaking, matter can be divided into pure substances and mixtures. Elements and compounds can be created from pure material. The two types of mixtures are heterogeneous and homogenous.

Based on their physical and chemical properties, materials can be grouped. Matter is anything that has mass and space. Any mix of gas, liquid, and solid material is possible. When a substance changes from one state of matter to another without changing its chemical composition, this is referred to as a physical transformation.

For such more question on solid:

brainly.com/question/5247691

#SPJ4

The following question may be like this:

Classification of matter: after a series of chemical analysis, it was determined that an unknown sample contains three types of atoms, a, b and c. atoms a and b are found to be bound together in the sample, where as atom c is by itself. the unknown sample is also partly gas, and partly solid, with the solid containing a and b.

Based on the above information, the unknown sample is

a heterogeneous mixture a homogeneous mixture a pure substance, and it is a compound a pure substance, and it is an element

The unknown sample is a heterogeneous mixture, that is explained in the below section.

As it is given that the sample is partly gas (made up of C) and partly solid (made up of A & B), the unknown sample may be a heterogenous mixture (gas C + solid A-B), like smog (smoke + fog).

The matter can be classified into pure substances and mixtures. Elements and compounds can be created from pure material. The two types of mixtures are heterogeneous and homogenous.

Based on their physical and chemical properties, materials can be grouped. Matter is anything that has mass and space. Any mix of gas, liquid, and solid material is possible. When a substance changes from one state of matter to another without changing its chemical composition, this is referred to as a physical transformation.

To learn more about heterogeneous mixture check the link below-

https://brainly.com/question/1869437

#SPJ4

Complete question-

Classification of matter: after a series of chemical analysis, it was determined that an unknown sample contains three types of atoms, a, b and c. atoms a and b are found to be bound together in the sample, where as atom c is by itself. the unknown sample is also partly gas, and partly solid, with the solid containing a and b.

Based on the above information, the unknown sample is

a heterogeneous mixture

a homogeneous mixture

a pure substance, and it is a compound

a pure substance, and it is an element

Part A The decomposition of HI(g) is represented by the equation In which bulb would you expect the composition of gases to be closest to equilibrium? O bulb 1 2HI(g) =H2(g) +12(g) The following experiment was devised to determine the equilibrium constant of the reaction O bulb 2 O bulb 3 HI(g) is introduced into five identical 400-cm' glass bulbs, and the five bulbs are maintained at 623 K.The amount of Iz produced over time is measured by opening each bulb and titrating the contents with 0.0150 M Na2S2O3(aq). The reaction of I, with the titrant is O bulb 4 O bulb 5 12 +2Na2S2O3-Na2S406 + 2NaI Submit Previous Answers Correct You have enough information to calculate the value of Q at each time increme Part B What is the value of Kc for the decomposition of HI at 623 K? Express your answer numerically. View Available Hint(s) EVO AE ? Kc =

Answers

Methane and ethane, two saturated light paraffins that are gaseous in an atmosphere, make up the majority of the hydrocarbon mixture that makes up natural gas.

What is gases?

The percentages of nitrogen, oxygen, argon and other gases in the atmosphere of the Earth are roughly 78%, 21%, 0.9 percent, and 0.1%, respectively. Other gases that make up the final 0.1 percent include trace amounts of carbon dioxide, methane, water vapor, and neon. Gases are substances that can exist as a gas in one atmosphere of pressure. The 11 gases are Nitrogen, Hydrogen, Chlorine, Fluorine, Argon, Neon, Krypton, Radon, Xenon, and Oxygen. Given that they are all elements, these are known as pure gases.

Here,

The majority of the hydrocarbon mixture that makes up natural gas is made up of methane and ethane, two saturated light paraffins that are gaseous in an atmosphere.

To know more about oxygen,

brainly.com/question/27548761

#SPJ4

You have 100 mL of a 6 M solution of NaCI and you need to dilute it to 400 mL. What is the molarity of the new solution?

Answers

Answer: 1.5 M

Explanation:

In order to find the molarity of the new solution, we need to use the formula M1V1 = M2V2, where M1 is the initial molarity, V1 is the initial volume, M2 is the final molarity, and V2 is the final volume.

Given that the initial volume is 100 mL and the initial molarity is 6 M, we can plug in the values and solve for M2:

6 M x 100 mL = M2 x 400 mL

M2 = (6 M x 100 mL) / 400 mL

M2 = 1.5 M

So the new solution will have a molarity of 1.5 M.

What is the most similar element to an element with the atomic number of 113 and the outer energy level of 3?

Answers

The most similar element to an element is Nihonium.

What is a chemical element?

A chemical element is a chemical substance that cannot be broken down into other substances. Atoms are the fundamental building blocks of chemical elements, and the number of protons in each atom's nucleus determines which chemical element it belongs to.

Furthermore, a substance whose atoms all contain the same number of protons is said to constitute an element; alternatively, all the atoms of a certain element must contain the same number of protons. Chemical reactions cannot degrade elements since they are the simplest chemical forms.

Learn more about chemical elements here:

https://brainly.com/question/28376204

#SPJ1

Predict the organic products from reaction of 2-pentyne with 1 equiv HCl

Answers

The products from the reaction of 2-pentyne with 1 equiv HCl are attached below.

What is 2-pentyne and what are some uses for 2-Pentyne?

Uses. Palladium nanoparticles supported on bacterial biomass, known as bio-Pd, were tested for their catalytic activity using 2-Pentyne.

There are a total of 4 carbon atoms present because linear sp-hybridized orbitals overlap with 1 and 4 carbon sp3 hybridised orbitals along their axes.

It is possible to create 2-pentyne by rearranging 1-pentyne in a solution of ethanolic potassium hydroxide or NaNH₂/NH₃.

We must understand that 1-pentyne is a terminal alkyne and would react with Tollens reagent, whereas 2-pentyne is an internal alkyne and would not react with Tollens reagent. Therefore, using the Silver mirror test, we can distinguish between 1-pentyne and 2-pentyne.

To know more about 2-pentyne visit:

https://brainly.com/question/10366676

#SPJ4

Name the organic product of the following reaction

Answers

The organic product of the following reaction is called benzene which has chemical formula C₆ H₆

What is benzene?

The organic compound benzene has the molecular formula C6H6 and is made up of six carbon atoms joined together in a planar ring by one hydrogen atom. Benzene is a hydrocarbon because it only contains carbon and hydrogen atoms.

At room temperature, benzene is a chemical that is either colorless or a light yellow liquid. It is highly flammable and has a pleasant scent. Benzene quickly dissipates into the air. Its vapor can sink into low-lying areas because it is heavier than air.

What is benzene commonly known by?

The organic compound benzene, also known as phenylene, has the molecular formula C6H6. Each of the six carbon atoms in the benzene molecule is attached to a hydrogen atom in a planar ring. Benzene is a hydrocarbon because it only has carbon and hydrogen atoms.

Learn more about benzene:

brainly.com/question/6028840

#SPJ1

Below is the SN2 reaction between (S)-2-chlorobutane and cyanide (CN–). In the first box, draw the curved arrows to reflect electron movements. In the second box add the organic product. In both boxes, add all lone pairs of electrons and non-zero formal charges.

Answers

SN2 reaction between (S)-2-chlorobutane and cyanide (CN–) proceeds by a nucleophilic substitution mechanism.

How the reaction works?

In this reaction, a nucleophile (CN–) attacks the carbon atom in the chloroalkane (S)-2-chlorobutane, which is bearing a leaving group (chlorine), pushing off the leaving group and forming a new carbon-nitrogen bond.

The curved arrows can be used to depict the flow of electrons in the reaction:

The nucleophile (CN–) donates a pair of electrons to the carbon atom in (S)-2-chlorobutane, forming a new carbon-nitrogen bond and pushing off the chlorine atom.

The electrons from the carbon-chlorine bond move to the chlorine atom, which forms a chloride ion (Cl–).

The organic product of the reaction would be (S)-2-cyanobutane

To know more about carbon-nitrogen bond visit: https://brainly.com/question/8091102

#SPJ4

Describe how to prepare 500ml of a approximately 0.20 mole of soduim hydroxide (NaOH) using solid sodium chloride

Answers

Answer:

To prepare 500ml of a approximately 0.20 mole of soduim hydroxide (NaOH) using solid sodium chloride, you will need to:

Obtain the necessary materials: 500ml of distilled water, 0.20 moles of solid sodium chloride (NaCl) and a container.

Slowly add the solid sodium chloride to the distilled water while stirring the solution.

Use a thermometer to monitor the temperature and stop adding the solid sodium chloride when the temperature reaches 90-100 °C.

The solution will become cloudy and will start to release heat. Allow it to cool down, and then measure the final volume of the solution.

The obtained solution will be a approximately 0.20M of sodium hydroxide.

Please note that this method is called "precipitation method" and it is not the only method to prepare sodium hydroxide solution, and also this method is not safe to handle and should only be done by trained person with proper lab equipment and safety measures.

The standard free energy of formation of AgCl (S) is -110. kJ/mol. Delta G degree for the reaction 2 AgCl (s) rightarrow 2 Ag(s) +Cl2(g) is:
a. 110 kJ
b. 220 kJ
c. -110 kJ
d. -220 kJ
e. -55 kJ
f. 55 kJ

Answers

The standard free energy of formation of AgCl (S) is -110. kJ/mol. The Delta G (ΔG) degree for the reaction 2 AgCl (s) → 2 Ag(s) +Cl₂(g) is 220 kJ option - b is correct answer.

How do you define standard Gibbs free energy?

The standard Gibbs free energy of a compound's formation is the change in Gibbs free energy that occurs when 1 mole of that substance is made up of its constituent elements in their standard states, which is the form of the element that is most stable at 25 °C and 100 kPa. Its logotype is fG.

The standard Gibbs free energy for any reaction is simply the difference between the sum of the standard Gibbs free energies for the formation of the products and the reactants.

The ΔG of chlorine(gas) and silver(solid) is 0 as it is standard free energy because it is the most stable form of the element at 1 bar of pressure and the specified temperature, usually 298.15 K or 25°C.

To know more about Gibbs free energy visit:

https://brainly.com/question/20358734

#SPJ4

Step 6: Measure Pressure and Volume with the Book
and 1 kg of Weight
Total the mass on the syringe. Record it in the
correct row of the data table.
kg
DONE
4
O-
01
Click and drag weights to change the pressure.
Click the syringe to zoom in and see the volume.

Answers

Total mass on the syringe is 1.498 Kg . To find the total mass of a solution, we need to add the mass of the solute to the mass of the solvent.

What in chemistry is a solute?

A solute is something that a solvent can disintegrate in order to make a solution out of. A solute can take many different forms. It could be either a material, fluid, or vapour. The solute is separated and dispersed among its molecules adequately by the solvent, or substance, which induces the solute to dissolve.

pressure = 1.18

volume of the gas in the syringe. we are estimating it to the nearest 0.5 mL is 43.5 mL.

Product of Pressure and volume is 51.3

To know more about syringe visit :-

https://brainly.com/question/20320556

#SPJ1

What osmotic pressure (in atmospheres) would you expect for each of the following solutions
5.18g of NaCl in 342.5mL of aqueous solution at 58C
and
5.95g of sodium acetate, CH3CO2Na, in 52.5mL of aqueous solution at 20?C

Answers

The osmotic pressure of solution 5.18g of NaCl in 342.5mL of aqueous solution at 58°C is 14.077 atm and 5.95g of sodium acetate, CH₃CO₂Na, in 52.5mL of aqueous solution at 20°C is 66.441 atm

What is an easy way to define osmotic pressure?

Osmotic pressure is the amount of force required to stop fluid flow on the solution side of a semipermeable membrane when a solution is being separated from pure water.

Moles NaCl = 5.18 g/ 58.44 g/mol= 0.0886

Molarity = 0.0886 mol / 0.3425 L=0.259M

i ( Vant'Hoff factor) = 2

Osmotic pressure = CRTi = 0.259 x 0.08206 x 331 K x 2 = 14.077 atm

Moles CH₃COONa = 5.95 g/ 82.036 g/mol= 0.0725

M = 0.0725 / 0.0525 L=1.381

i = 2

osmotic pressure = 1.381 x 0.08206 x 293 K x 2 = 66.441 atm.

To know more about osmotic pressure visit:

https://brainly.com/question/29823250

#SPJ4

TRUE/FALSE. the heat capacity is typically ignored when deriving boundary conditions for the thermal energy equation

Answers

This assertion is false. When determining the boundary conditions for the thermal energy equation, the heat capacity is typically taken into consideration.

The proportion of heat a material can absorb to a change in temperature is known as heat capacity. In terms of the actual amount of material being taken into account, which is most frequently a mole, it is typically stated as calories per degree (the molecular weight in grams).

Specific heat is the heat capacity expressed in calories per gram. The definition of a calorie is based on the fact that one calorie is equal to one degree Celsius of water's specific heat.

Learn more about heat capacity:

https://brainly.com/question/28302909

#SPJ4

Na + CuO → NaO + Cu

Answer the hypothesis :
If the reaction is a single replacement reaction, then __ will form __.

Answers

Answer:

...then product will form reactant

Explanation:

Na is more reactive than Cu, so Na will join up with O2 and leave Cu by itself

a chemist wishes to analyze the caco3 content of an antacid tablet by reaction with hcl. the tablet is weighed, and the volume of hcl required to react with the tablet is measured. which of the following statements correctly describe the assumptions that must be made in order to draw a scientifically valid conclusion from the data? (select all that apply.)

Answers

It is anticipated that none of the other compounds in the antacid tablet would interact with the HCl. It is required to assume that it is feasible to fairly accurately estimate the volume of HCl. The chemist must evaluate more than one tablet to obtain a more accurate result. Hence all the statements are true.

In order to treat indigestion and heartburn, antacids work to balance out the acid in your stomach. Without a prescription, you can get them from pharmacies and stores as liquid or chewable tablets.

Calcium carbonate is used to treat illnesses brought on by excessive stomach acid, such as heartburn, indigestion, upset stomach, and others. Lowering the level of gastric acid. It is a member of the antacid class of drugs. Additionally, it might be applied to raise your body's calcium levels. Calcium is a mineral that is crucial for developing strong bones and keeping the heart healthy.

To know more about antacids

brainly.com/question/28187760

#SPJ4

A chemist wants to use a reaction with Hcl to determine the caco3 concentration of an antacid tablet. The volume of Hcl needed to react with the pill is calculated after weighing the tablet. Which of the following statements most accurately describes the presumptions that need to be made in order to interpret the data in a way that is scientifically sound? (Check every box that applies.)

1. It is expected that the HCl won't interact with any other ingredients in the antacid tablet.

2. It is necessary to presume that it is possible to quantify the volume of HCl fairly accurately.

3. To get a more precise result, the chemist needs to examine more than one tablet.

Chemistry A (SA) # 3606 / Module 6: Covalent Compounds
1. Ionic compounds and polar molecules can both dissolve in water. Which statement correctly describes what will occur when they dissolve?
Neither the ionic compound nor the polar molecule will dissociate in water.
Both the ionic compound and the polar molecule will dissociate in water.
The ionic compound will dissociate, but the polar molecule will not.
The polar molecule will dissociate, but the ionic compound will not.

Answers

Ionic compounds dissolve readily in water because the polar water molecules are able to interact and stabilize the charged ions.

How can water dissolve ionic compounds?Polar solvents, particularly water, help ionic molecules dissolve. This happens when the negative anion of the ionic solid is drawn to the positive end of the water molecule and the positive cation of the ionic solid is drawn to the negative end of the water molecule (oxygen) (hydrogen). An ionic substance separates into positive and negative ions during dissolution. For these ions to remain distinct and soluble in the solution, they need to interact with other charges. If the covalent bonds are a component of a polyatomic ion, a molecule can contain both ionic and covalent bonds. Ammonium ions, NH4+, sulphate ions, SO42-, hypochlorite ions, and ClO- are a few examples of polyatomic ions.

To learn more about ionic compounds refer to:

https://brainly.com/question/18246121

#SPJ1

b) Explain why Carbon (IV) oxide and water are removed before liquefaction of air​

Answers

Answer:

Before air is liquefied, water vapor and carbon dioxide are removed, because these substances solidify when cooled and would clog the pipes of the air liquefaction plant.

most of the body\'s excess nitrogen is excreted as urea. draw urea.

Answers

In addition to being a starting point for the production of polymers and pharmaceuticals, urea is also utilized as a fertiliser and feed additive.

What is urea used for?In addition to being a starting point for the production of polymers and pharmaceuticals, urea is also utilized as a fertiliser and feed additive. An organic substance having the chemical formula CO(NH2)2, urea is also referred to as carbamide. Two amino groups are linked by a carbonyl functional group to form this amide. As a result, it is carbamic acid's most basic amide. The main organic component of human urine is urea, also known as carbamide, a waste product of many living things. This is due to the fact that it comes at the end of a series of processes that degrade the proteins' building blocks, the amino acids. Urea, commonly known as carbamide, is a safe, practical substance with a lengthy history.

To learn more about urea refer to:

https://brainly.com/question/14718113

#SPJ4

4. Compare the conductivity observations of dilute and concentrated NiCl₂ and NaOH.
Explain why you observed this.

Answers

NiCl₂ and NaOH are both electrolytes, which means that they dissociate in water to form ions, which are charged particles that can conduct electricity.

When NiCl₂ is dissolved in water, it dissociates into Ni²⁺ ions and Cl⁻ ions. The conductivity of a dilute solution of NiCl₂ is relatively low because there are fewer ions present in the solution, and thus fewer ions available to conduct electricity.

When the concentration of NiCl₂ is increased, the conductivity of the solution also increases. This is because as the concentration of the solution increases, there are more ions present in the solution, which results in a greater ability to conduct electricity.

Similarly, when NaOH is dissolved in water, it dissociates into Na⁺ ions and OH⁻ ions. As with NiCl₂, the conductivity of a dilute solution of NaOH is relatively low because there are fewer ions present in the solution. As the concentration of NaOH is increased, the conductivity of the solution increases because there are more ions present in the solution.

In summary, the conductivity of dilute solutions of NiCl₂ and NaOH is low because there are fewer ions present in the solution. As the concentration of these solutions increases, the conductivity increases because there are more ions present in the solution.

Draw the form of malonic acid that is expected to predominate at physiological pH.

Answers

At physiological pH, malonic acid is expected to exist predominantly as its conjugate base, malonate, which is a dianion with the molecular formula C3H2O4^2-.

What is molanic acid?

Molanic acid is an organic acid with the chemical formula C2H4O2. It is an intermediate in the metabolism of carbohydrates, and is formed when glucose is oxidized by enzymes such as glucose dehydrogenase. Molanic acid is a colorless liquid with a slightly sweet smell, and is soluble in water, alcohol, and ether. It has a molecular weight of 60.05 g/mol and is a precursor to the other organic acids such as lactic acid, malic acid, and citric acid. Molanic acid is used in the food industry as a preservative, and is also used in the manufacture of pharmaceuticals, dyes, and perfumes.

This dianion is a symmetric molecule with a planar triangular structure, with a central carbon atom double-bonded to two oxygen atoms and single-bonded to two additional oxygen atoms. The two negative charges are localized on the two outer oxygen atoms.

To know more about molanic acid click-
https://brainly.com/question/15088490
#SPJ4

Other Questions
What is OSHC stand for? What is anti-Semitism? What did the Nazis blame on the Jews? What event would be considered the final straw and led to America entering WWII? Which sentence best describes the above theme of the essay?A. At that age I was not squeamish about killing animals, but I had never shot an elephant and never wanted to.B. He becomes a sort of hollow, posing dummy, the conventionalized figure of the sahib.C. I often wondered whether any of the others grasped that I had done it solely to avoid looking a fool.D. I perceived in this moment that when the white man turns tyrant it is his own freedom he destroys. Who would MOST LIKELY to agree with the following statement? What impact did Emperor Asoka's conversion to Buddhism have on India in the 3rd century BCE? I need help with this algebra problem An estuary that normally shelters juvenile fish and other organisms has become filled with silt and pollution. How will this affect the age distribution of the populations? Ricky spent $44 total on a baseball mitt and a ball. If the mitt cost$2 more than 5 times the cost of the ball, find the cost of eachitem. Highlight the verbs in this passage thatdemonstrate parallel structure.He has plundered our seas, ravaged ourCoasts, burnt our towns, and destroyed thelives of our people.from the Declaration of Independenceby Thomas Jefferson To provide better transportation, the nation built many roads and ___. Why is biodiversity important? (DO NOT ANSWER IF YOU DONT KNOW) What are some examples of slavery in the 21st century (addictions to substances, addictive behaviours, consumerism, etc.) and what would the people enslaved today need in order to be liberated (freed)? help asap! Which of the following statement is true?Animals cannot be changed into petrified fossil.The process of petrifaction is always completed.Replacing original materials by minerals creates petrified fossils.Petrified wood can only be found closer to the equator. When you have a job, what will be the first expensive item youll be saving for? How much do you think youll need to save for it? Write a 7 sentence response. I = 160.67, P = 900, t = 12Answer step by step please:) Choose the best answer. If necessary, use the paper you were given.QuestionAt 8 a.m., the temperature in a city was -8 degrees Celsius (C). At noon on the same day, the temperature inthe city was 2C. What was the difference in temperature, in degrees Celsius, from 8 a.m. to noon in the city?-6C2C4C10C In the isotope Carbon-14, what does the number 14 represent? What is the best interpertation of the figurative language in this line? I am ten million bricks of unshakable faith Can someone please help Ill mark you the brainiest..