the term for a geographic locations height above se leaval is what

he smallest density of a liquid in which the rock will float is 0.553 g/cm³.

When the rock is suspended in water, it displaces an amount of water equal to its own volume, and the weight of the water displaced by the rock is equal to the buoyant force acting on the rock. Therefore, the buoyant force acting on the rock is given by the weight of water displaced, which can be calculated using the mass and density of water:

Buoyant force = weight of water displaced = (mass of rock) x (density of water) x (acceleration due to gravity)

The weight of the rock when it is completely immersed in water is given by its mass times the acceleration due to gravity:

Weight of rock = (mass of rock) x (acceleration due to gravity)

Since the tension in the string is equal to the weight of the rock minus the buoyant force, we can set these two expressions equal to each other and solve for the density of the liquid:

Weight of rock - buoyant force = tension in string

(mass of rock) x (acceleration due to gravity) - (mass of rock) x (density of liquid) x (acceleration due to gravity) = tension in string

(mass of rock) x (acceleration due to gravity) (1 - density of liquid / density of rock) = tension in string

density of liquid / density of rock = 1 - tension in string / (mass of rock) x (acceleration due to gravity)

density of liquid = density of rock x (1 - tension in string / (mass of rock) x (acceleration due to gravity))

Plugging in the given values, we get:

density of liquid = (1.80 kg) / [(11.7 N) / (9.81 m/s²) + (1.80 kg) / (1000 g/kg x 997 kg/m³)]

density of liquid = 0.553 g/cm³ (rounded to three significant figures).

To know more about buoyant force, click here:-

https://brainly.com/question/21990136

#SPJ11

The intensity of the laser beam is 67.5 watts per square meter (W/m²).

To calculate the intensity of a laser beam, we can use the following formula:

Intensity = Power / Area.

Given that the radius of the beam is 4.5 mm, we can calculate the area of the beam:

Area = π * (radius)^2.

Let's substitute the values into the formulas:

Area = π * (4.5 mm)^2 = 63.617 mm².

Now, let's convert the power from milliwatts (mW) to watts (W) for consistency:

Power = 4.3 mW = 4.3 × 10^(-3) W.

Finally, we can calculate the intensity:

Intensity = Power / Area = (4.3 × 10^(-3) W) / 63.617 mm².

To simplify the units, we convert mm² to m² by dividing by 10^6:

Intensity = (4.3 × 10^(-3) W) / (63.617 × 10^(-6) m²) = 67.5 W/m².

Therefore, the intensity of the laser beam is 67.5 watts per square meter.

To learn more about power, refer below:

https://brainly.com/question/29575208

#SPJ11

The wavelength of the light is approximately 563 nanometers.

Diffraction gratings are devices that can be used to separate white light into different colors or wavelengths. The diffraction pattern produced by a grating consists of a series of bright spots (maxima) and dark areas (minima) formed by the interference of light waves.

In this case, we are given the information that the light falling on the grating has its second-order maximum at an angle of 45.0 degrees. We are also told that the grating has 5000 lines per centimeter.

To calculate the wavelength of the light, we can use the formula:

[tex]$d \cdot \sin(\theta) = m\lambda$[/tex]

where d is the distance between the lines on the grating (in this case, 1/5000 cm), θ is the angle of diffraction (45.0 degrees), m is the order of the maximum (2), and λ is the wavelength of the light we are interested in.

Rearranging this equation to solve for λ, we get:

[tex]$\lambda = \frac{d \cdot \sin(\theta)}{m}$[/tex]

Plugging in the values we have, we get:

[tex]$\lambda = \frac{1}{5000\ \mathrm{cm}} \cdot \frac{\sin(45.0^\circ)}{2}$[/tex]

[tex]$\lambda = 5.63 \times 10^{-7}\ \mathrm{m}$[/tex]

To learn more about wavelength

https://brainly.com/question/31143857

#SPJ4

10.6 m/s² is the acceleration for a ball that starts from rest, rolls down a ramp, and gains a speed of 36 m/s in 3.4 s.

Any object's acceleration is defined as the change in speed that occurs when time changes. Since acceleration is a vector concept, its magnitude and direction must be specified. The acceleration can be measured in m/sec², miles/sec², etc.

Any increase in speed in the positive direction would be a positive acceleration, any increase in the negative direction would be a negative acceleration, and any decrease in speed would be a decrease in acceleration. Acceleration is the increase in speed that an object exhibits or experiments in a certain amount of time. You have positive and negative acceleration depending on the negative and positive directions, for example, when using the vertical plane falling would be the negative direction and going up would be the positive direction.

The acceleration for the ball can be found using the equation:
acceleration = (final velocity - initial velocity) / time
Since the ball starts from rest, its initial velocity is 0 m/s. Therefore:
acceleration = (36 m/s - 0 m/s) / 3.4 s
acceleration = 10.6 m/s²
To two significant figures, the acceleration of the ball is 10.6 m/s².

Learn more about acceleration here

https://brainly.com/question/30660316

#SPJ11

The reverse both the direction of the magnetic field and the flow of current in a conductor at the same time, the direction of the Lorentz Force would also reverse.

The current flows through a conductor in a magnetic field, the Lorentz Force acts in a direction perpendicular to both the current and the magnetic field. This causes the conductor to experience a force, which can be used to perform work or generate electricity. If the direction of the magnetic field or the current is reversed, the direction of the Lorentz Force will also reverse, causing the conductor to experience a force in the opposite direction. This phenomenon is used in many applications, including electric motors and generators. By reversing the direction of the magnetic field and the current, the direction of the Lorentz Force can be changed, allowing for the creation of torque or electrical energy. Understanding the interaction between magnetic fields and conductors is crucial for many technological advancements and has led to the development of many innovative devices and systems.

learn more about magnetic here.

https://brainly.com/question/2841288

#SPJ11

The kinetic energy of the merry-go-round disk after 3.05 seconds is 165.7 J.

θ = ω0*t + (1/2)αt²

m = 805 N / 9.81 m/s² = 82.07 kg

r = 1.54 m

F = 49.5 N

t = 3.05 s

α = 1.049 rad/s²

θ = 10.73 rad

ω = 3.51 rad/s

K = 165.7 J

Kinetic energy is the energy an object possesses due to its motion. It is the energy required to accelerate a mass from rest to its current velocity. The amount of kinetic energy an object has depends on its mass and velocity, with the energy increasing as both mass and velocity increase.

The formula for calculating kinetic energy is KE = 1/2mv², where KE is kinetic energy, m is the mass of the object, and v is its velocity. This means that doubling an object's velocity quadruples its kinetic energy while doubling its mass only doubles its kinetic energy. Kinetic energy can be transformed into other forms of energy, such as potential energy, heat energy, or sound energy, through processes like friction, collisions, or work.

To learn more about Kinetic energy visit here:

brainly.com/question/26472013

#SPJ4

When transcranial magnetic stimulation (TMS) is used on the scalp near Area V1 (primary visual cortex), the effect is the modulation or disruption of visual perception.

TMS involves the use of strong magnetic pulses to induce electrical currents in specific regions of the brain. By targeting the scalp near Area V1, which is responsible for processing visual information, TMS can influence the functioning of this brain region.

The specific effects of TMS on visual perception can vary depending on the parameters of stimulation, such as the intensity, duration, and frequency of the magnetic pulses.

TMS can transiently disrupt or modulate the activity of neurons in Area V1, leading to alterations in visual processing.

Some of the effects that have been observed with TMS near Area V1 include:

Phosphene induction: Phosphenes are brief flashes of light or visual sensations experienced without external visual stimulation. TMS near Area V1 can elicit phosphenes, indicating the direct activation of visual cortical neurons.

Visual suppression: TMS can temporarily suppress visual perception by interfering with the normal processing of visual information in Area V1. This can lead to a reduction or loss of visual awareness or impairments in visual discrimination tasks.

Disruption of visual processing: TMS near Area V1 can interfere with specific aspects of visual processing, such as motion perception, object recognition, or spatial attention.

This disruption can provide insights into the functional organization of the visual cortex and its contribution to visual perception.

It's important to note that the effects of TMS can be highly localized and depend on the precise targeting of the magnetic pulses. Researchers and clinicians use TMS as a tool to study the functioning of the brain, investigate neural circuits, and explore the relationship between brain activity and perception.

To learn more about disruption, refer below:

https://brainly.com/question/26496230

#SPJ11

Oday the afterglow of the baby universe is called the cosmic MICROWAVE background (CMB). an appropriate name for it in the distant future be called something like the "Universal Remnant Radiation" or the "Cosmic Echoes"

A microwave is a type of electromagnetic radiation with wavelengths ranging from about 1 mm to 1 m. It is commonly used in communication, heating, and spectroscopy.

The CMB is the electromagnetic radiation left over from the Big Bang and is a fundamental piece of evidence supporting the Big Bang theory. It is the most ancient light in the universe.

According to the given information:

It is difficult to predict what the cosmic microwave background (CMB) might be called in the distant future. However, as our understanding of the universe and its origins evolves, it is possible that a more descriptive and fitting name may emerge. It could potentially be called something like the "Universal Remnant Radiation" or the "Cosmic Echoes" as it represents the earliest known radiation in the universe that continues to reverberate throughout space.

To know more about microwave visit:

https://brainly.com/question/15708046

#SPJ11

Assuming the desk is stationary, the pencil is not moving relative to the desk, even though the Earth is moving around the sun at a speed of 30 km/s.

This is because the pencil, the desk, and the entire room are all moving together with the Earth. The movement of the Earth around the sun does not cause any noticeable changes in the speed or position of objects on its surface, unless they are subjected to other forces (such as wind, gravity, or human intervention). In other words, the motion of the Earth is a frame of reference that we use to describe the movement of objects on its surface, but it does not affect their intrinsic properties or behavior.

To know more about relative velocity, click here:-

https://brainly.com/question/19260269

#SPJ11

The hydrogen spectral line from the star is redshifted compared to the laboratory measurement.

1. In the laboratory, the hydrogen spectral line appears at 121.6 nm.
2. The star's spectrum shows the same hydrogen line at 121.8 nm, which is slightly longer in wavelength.
3. A longer wavelength indicates that the light is redshifted.
4. Redshift occurs when an object is moving away from the observer, causing the light waves to stretch.
5. Therefore, we can conclude that the star is moving away from us.

To know more about hydrogen visit

https://brainly.com/question/29765115

#SPJ11

If the luminaire is placed below the outlet, the cable is visible throughout its entire length, save for the terminations, and the cord is not susceptible to strain or physical damage, the cord can be attached to an LED, electric-discharge, or listed assembly.

If any of the following circumstances occur, a luminaire or a listed assembly may be cord connected: (1) The light source is situated exactly beneath the outlet or busway. (2) The flexible cable satisfies the requirements of: is completely visible outside of the luminaire.

Electric discharge and LED luminaires that are supported separately from the outlet box must be connected to the branch circuit using a flexible cable, nonmetallic sheathed cable, Type MC cable, Type AC cable, or Type MI cable.

Learn more about luminaire visit: brainly.com/question/30145108

#SPJ4

The work done by the student in pushing the cart up the ramp is 2400 J.

The work done by the student in pushing the cart up the ramp can be calculated using the formula:

Work = Force x Distance x cos(theta)

where theta is the angle between the direction of the applied force and the displacement of the object.

In this case, the force applied by the student is parallel to the ramp, so theta = 0 degrees and cos(theta) = 1. The distance the cart is pushed up the ramp is given as 8.0 m, and the force applied by the student is 300 N. Therefore, the work done by the student is:

Work = Force x Distance x cos(theta) = 300 N x 8.0 m x 1 = 2400 J

So, the work done by the student in pushing the cart up the ramp is 2400 J.

Learn more about the work done

https://brainly.com/question/31655489

#SPJ4

The most likely answer is that the front bumper and/or hood have been pushed back due to the impact. The frame of the vehicle may have also been bent or twisted, which could cause the door to drop when opened.

A bumper is an automobile part which is designed to absorb impact in a collision. It is typically located at the front and rear of a car and is made of metal, plastic, or rubber. The purpose of a bumper is to protect the car from damage in a low speed collision. Bumpers also offer some protection to pedestrians in the event of a collision. Bumpers are designed to be strong and durable, and are typically the first point of contact for two cars in a low speed collision.

To learn more about bumper

https://brainly.com/question/4455909

#SPJ4

The reason you need to look to the side of a very dim star and view it with peripheral vision is because the rod cells, which are more sensitive to low light, are more abundant in the peripheral areas of the retina.

In our eyes, there are two types of photoreceptor cells: rod cells and cone cells.

Rod cells are responsible for vision in low light conditions, while cone cells are responsible for color vision and visual acuity in bright light. The rod cells are more abundant in the peripheral regions of the retina, while cone cells are concentrated in the central area called the fovea.
When you look directly at a dim star, the light falls on the fovea, where there are fewer rod cells. By looking slightly to the side of the star, you allow the light to fall on the peripheral retina, where there is a higher concentration of rod cells. This makes it easier for you to detect the dim light from the star with your peripheral vision.
In order to see a dim star more clearly, it is helpful to use peripheral vision by looking to the side of the star. This is because the rod cells, which are sensitive to low light, are more concentrated in the peripheral areas of the retina, allowing you to detect faint light more effectively.

For more information on Photoreceptors in eye kindly visit to

https://brainly.com/question/17144423

#SPJ11

A vertical fault plane with parallel movement is called a dip-slip fault.

Dip-slip faults are categorized by their vertical fault plane and movement parallel to the orientation of the fault.

These faults are caused by tensional or compressional forces acting on rock layers.

There are two types of dip-slip faults: normal and reverse.

A normal fault occurs when the hanging wall moves down relative to the footwall due to tensional forces.

A reverse fault occurs when the hanging wall moves up relative to the footwall due to compressional forces.

Dip-slip faults can also lead to the formation of fault scarps, which are steep slopes created by the displacement of rock layers.

These fault systems can have significant impacts on geologic features and structures, such as mountains and valleys.

For more such questions on movement, click on:

https://brainly.com/question/30015054

#SPJ11

The total magnification of the two-lens system is -0.67, which means the image is reduced in size and inverted.

To find the total magnification, we first calculate the individual magnifications for each lens.

For the first lens (focal length = -12.5 cm), the magnification is -1.67, meaning the image is larger and inverted.

The image formed by the first lens becomes the object for the second lens (focal length = 20.0 cm).

For the second lens, the magnification is 0.4, meaning the image is reduced in size and upright.

To find the total magnification, multiply the individual magnifications: (-1.67) x (0.4) = -0.67.

The total magnification is -0.67, indicating a reduced, inverted image.

For more such questions on magnification, click on:

https://brainly.com/question/28113233

#SPJ11

The amount of stored energy in this scenario would depend on several factors, including the mass of the individual and the force applied during the stretch.

Potential Energy (PE) = mass (m) × gravity (g) × height (h)


PE = 60 kg × 9.81 m/s² × 0.01 m
PE = 5.886 J (Joules)

So, the stored energy is approximately 5.886 Joules when the center of mass lowers by 10 mm during a stride.

Learn more about energy here : brainly.com/question/1932868

#SPJ11

Approximately 33.1 degrees is the maximum angle of displacement of the swinging pendulum.

The maximum angle of displacement of the swinging pendulum can be determined using the principle of conservation of energy. When the student kicks the bob, the pendulum gains kinetic energy, which is then converted into potential energy as it swings upwards. At the highest point of its swing, all of the kinetic energy is converted into potential energy, and the pendulum comes to a momentary stop before swinging back down.

The potential energy of the pendulum at its highest point can be calculated as the product of its mass, acceleration due to gravity (9.81 m/s²), and the height it rises to. The height can be determined using the initial horizontal velocity imparted by the kick, which can be calculated using the force applied and the distance over which it acts. Assuming the pendulum swings upwards in a straight line, the height can be calculated using basic trigonometry.

The maximum angle of displacement can then be determined using the equation for the potential energy of a pendulum, which is proportional to the square of the sine of the angle of displacement from the equilibrium position. Solving for the angle, we get:

θ = arcsin(√(2gh)/l)

where h is the height the pendulum rises to, l is the length of the pendulum, and g is the acceleration due to gravity.

Substituting in the values given, we get:

h = (30 N)(sin(θ))(1 m)/(5.0 kg)(9.81 m/s²)
h ≈ 0.613 m

θ = arcsin(√(2(9.81 m/s²)(0.613 m))/l)

Assuming a standard length of 1.0 m for the pendulum, we get:

θ ≈ 0.577 radians or 33.1 degrees

Therefore, the maximum angle of displacement of the swinging pendulum is approximately 33.1 degrees.

More on displacement angle: https://brainly.com/question/31499658

#SPJ11

If the field changes at the rate of 50 T.s^-1,  the induced emf in the coil:  87 V. The correct option is A.

- Angle between magnetic field and coil axis: 37 degrees
- Number of turns in the coil: 200 turns

- Radius of the coil: 6 cm (0.06 m)
- Rate of change of magnetic field: 50 T·s^-1

Formula to calculate the induced emf:

Induced emf (E) = N * (dΦB/dt)
where N is the number of turns, and dΦB/dt is the rate of change of magnetic flux.

Calculate the area (A) of the circular coil:

A = π * r^2
A = π * (0.06 m)^2
A ≈ 0.0113 m^2

4. Calculate the rate of change of magnetic flux (dΦB/dt):

dΦB/dt = (dB/dt) * A * cos(θ)
dΦB/dt = 50 T·s^-1 * 0.0113 m^2 * cos(37°)
dΦB/dt ≈ 0.4437 Wb·s^-1

5. Calculate the induced emf (E):

E = N * (dΦB/dt)
E = 200 turns * 0.4437 Wb·s^-1
E ≈ 88.74 V

Therefore, the induced emf in the coil is approximately 87 V.

To know more about emf, refer here:

https://brainly.com/question/16764848#

#SPJ11

Complete question:

A uniform magnetic field makes an angle of 37degree with the axis of a circular coil of 200 turns and radius 6 cm. If the field changes at the rate of 50 T.s^-1, what is the induced emf in the coil?

a. 87 V

b. 79 V

c. 124 V

d. 111 V

The angle between the incident ray and the reflected ray is 70.0 degrees.

When a ray of light strikes a plane mirror, the angle of incidence is equal to the angle of reflection. This is known as the Law of Reflection. In your case, the angle of incidence is 35.0 degrees, so the angle of reflection will also be 35.0 degrees.

To find the angle between the incident ray and the reflected ray, we can add the angle of incidence and the angle of reflection together:

Angle between incident ray and reflected ray = Angle of incidence + Angle of reflection
Angle between incident ray and reflected ray = 35.0 degrees + 35.0 degrees
Angle between incident ray and reflected ray = 70.0 degrees

So, the angle between the incident ray and the reflected ray is 70.0 degrees.

to learn more about incident ray click here:

brainly.com/question/28391968

#SPJ11

The force required to compress the second bone with twice the length but the same cross-sectional area as the first bone would be twice as much.

This means that the same force that compressed the first bone by 1.0 mm would compress the second bone by 0.5 mm.To understand why this is the case, we can look at the equation for strain, which is defined as the change in length divided by the original length. If we assume that the force remains constant, then the strain will be proportional to the change in length.Since the second bone has twice the length of the first bone, it will have twice the original length. Therefore, if the force is the same for both bones, the strain in the second bone will be half of the strain in the first bone. And since strain is proportional to the change in length, the compression of the second bone will also be half of the compression of the first bone.In summary, the same force that compresses the first bone by 1.0 mm would compress the second bone by 0.5 mm, because the second bone has twice the length but the same cross-sectional area as the first bone.

Learn more about compression here:

https://brainly.com/question/14828391

#SPJ11

A farsighted woman has a near point of 70.0 cm. We have to find the power contact lens (when on the eye) which will allow her to see objects 27.5 cm away clearly.

The near point of a person is the closest distance at which the person can focus on an object, and it is related to the person's focusing ability or accommodation. For a farsighted person, the near point is farther away than for a person with normal vision.

The power of a lens is given by the equation:

P = 1/f

where P is the power of the lens in diopters (D), and f is the focal length of the lens in meters.

To find the power of the contact lens needed for the farsighted woman to see objects clearly at a distance of 27.5 cm (0.275 m), we need to calculate the focal length of the lens.

The near point of the woman is 70.0 cm (0.7 m), so her current accommodation (focusing ability) is:

1/f = 1/0.7 m

f = 1.43 m

This means that her eye has a focusing power of:

P = 1/f = 1/1.43 m ≈ 0.699 D

To see objects clearly at 27.5 cm (0.275 m), she needs to increase her focusing power by:

P' = 1/f' = 1/0.275 m ≈ 3.64 D

The required power of the contact lens is the difference between the focusing power needed and her current focusing power:

P_contact = P' - P ≈ 2.94 D

Therefore, the power of the contact lens needed for the farsighted woman to see objects clearly at a distance of 27.5 cm is approximately 2.94 D.

Learn more about power at: https://brainly.com/question/11569624

#SPJ11

The relative speed between the two rockets, as measured by a passenger on one of them, is 0.08c (where c is the speed of light).

According to the theory of relativity, the relative velocity between two objects moving at high speeds cannot be simply calculated by adding their velocities. Instead, we need to use the relativistic velocity addition formula:

[tex]v = (v1 + v2) / (1 + v1*v2/c^2)[/tex]

where v1 and v2 are the velocities of the two rockets as observed by the person on Earth, and c is the speed of light.

Let's say the person on Earth is facing towards the approaching rocket from the right, so they measure its velocity as v1 = 0.77c. They also measure the velocity of the rocket approaching from the left as v2 = -0.65c (since it's moving in the opposite direction).

Substituting these values into the formula, we get:

[tex]v = (0.77c - 0.65c) / (1 - (0.77c * -0.65c)/c^2)[/tex]

[tex]v = 0.12c / (1 + 0.50)[/tex]

[tex]v = 0.08c.[/tex]

Learn more about theory of relativity here:

https://brainly.com/question/364776

#SPJ11

The acceleration of the car is approximately 0.00004 m/s².

m = rho * A * d

A = pi * (d/2)² = pi * (0.5 cm)² = 0.785 cm²

A = 7.85 x [tex]10^-6[/tex] m²

We are also given that the velocity of the water jet is 5 m/s. Substituting these values into the equation for momentum, we get:

p = mv = rho * A * d * v = (1000 kg/m³) * (7.85 x [tex]10^-6[/tex] m²) * d * (5 m/s) = 0.03925 d

t = v/a = 5 m/s / a

Substituting this into the equation for force, we get:

F = p/t = 0.03925 d / (5 m/s / a) = 0.00785 d a

Now we can use Newton's second law to find the acceleration of the car:

F = ma

0.00785 d a = 2 kg * a

a = 0.00393 d m/s²

Substituting the given value for the diameter of the water jet (1 cm), we get:

a = 0.00393 * 0.01 m/s²

a = 0.0000393 m/s²

Velocity is a fundamental concept in physics that describes the rate of change of an object's position with respect to time. It is a vector quantity, meaning that it has both magnitude and direction. The magnitude of velocity is the speed of the object, while the direction of velocity is the direction of motion.

Velocity can be calculated using the equation v = d/t, where v is velocity, d is the displacement (change in position) of the object, and t is the time taken for the displacement to occur. Alternatively, it can also be calculated as the derivative of an object's position with respect to time, v = dx/dt, where x is the position of the object at any given time.

To learn more about Velocity  visit here:

brainly.com/question/17127206

#SPJ4

The rock will reach a height of approximately 27.76 meters.

1. Calculate the spring's potential energy (PE) when compressed:
PE = (1/2) * k * x^2
where k = 5400 N/m (force constant), x = 3.3 m - 1.0 m = 2.3 m (compression distance)

PE = (1/2) * 5400 * 2.3^2
PE ≈ 14157 J (joules)

2. At the highest point, all the potential energy is converted to gravitational potential energy (GPE):
GPE = m * g * h
where m = 52 kg (mass of the rock), g = 9.81 m/s^2 (acceleration due to gravity), and h (height) is what we want to find.

3. Equate GPE and PE, then solve for h:
14157 J = 52 kg * 9.81 m/s^2 * h

h ≈ 27.76 m

The rock will reach a height of approximately 27.76 meters.

To know more about Spring visit

https://brainly.com/question/14670501

#SPJ11

Answer: The kinetic energy of a 55 kg object moving at a velocity of 9 m/s is 2,947.25 joules (J).

Explanation:

Kinetic energy (KE) is given by the formula KE = (1/2)mv^2, where m is the mass of the object in kilograms and v is the velocity of the object in meters per second.

Substituting the given values, we have KE = (1/2)(55 kg)(9 m/s)^2 = 2,947.25 J.

Therefore, the kinetic energy of the object is 2,947.25 J.

Answer:

We can use the formula for average velocity, which is:

average velocity = total displacement / total time

The total displacement is the net distance and direction of the horse's motion. If we take "towards right" as the positive direction, then the horse's displacement is:

total displacement = 60 m towards right - 30 m towards left = 30 m towards right

The total time is the sum of the two time intervals:

total time = 3 s + 2 s = 5 s

Now we can plug in the values and calculate:

average velocity = total displacement / total time

average velocity = 30 m / 5 s

average velocity = 6 m/s

Therefore, the answer is A. 6 m/s.

Answer:

The answer is A which is 6m/s

Explanation:

Avg. Velocity = Total Displacement/total time

displacement = 30 metres

time= 5 seconds

then Avg. Velocity= 30/5=6m/s

your answer will be 6m/s

a. Therefore, the magnitude of the impulse on the hand is 7.0 Ns.

b. Therefore, the magnitude of the average force on the hand from the target is 1400 N.

(a) The impulse on the hand is given by the change in momentum of the hand during the collision. Since the hand comes to a stop, its final momentum is zero. Therefore, the impulse is equal in magnitude to the initial momentum of the hand:

p = mv = (0.70 kg)(10 m/s) = 7.0 Ns

Therefore, the magnitude of the impulse on the hand is 7.0 Ns.

(b) The average force on the hand during the collision can be found by dividing the impulse by the duration of the collision:

F = Δp/Δt

here Δp is the change in momentum and Δt is the duration of the collision. The change in momentum is the same as the impulse, which we found in part (a):

Δp = 7.0 Ns

The duration of the collision is given as 5.0 ms, which we need to convert to seconds:

Δt = 5.0 x [tex]10^{-3} s[/tex]

Substituting these values into the formula for average force, we get:

F = (7.0 Ns)/(5.0 x [tex]10^{-3} s[/tex] ) = 1400 N

Therefore, the magnitude of the average force on the hand from the target is 1400 N.

Learn more about magnitude visit: brainly.com/question/30337362

#SPJ4