The sequence of spectral line series emitted by excited hydrogen atoms, in order of increasing wavelength range, is as follows: Lyman series: This series contains spectral lines emitted by transitions of electrons from upper energy levels to the ground state, which is represented by n=1.
The spectral lines are in the ultraviolet region of the electromagnetic spectrum. This series is represented by the formula: n=1→(n=2,3,4,...). Balmer series: This series contains spectral lines emitted by transitions of electrons from upper energy levels to the first excited state, which is represented by n=2. The spectral lines are in the visible region of the electromagnetic spectrum. This series is represented by the formula: n=2→(n=3,4,5,...). Paschen series: This series contains spectral lines emitted by transitions of electrons from upper energy levels to the second excited state, which is represented by n=3. The spectral lines are in the infrared region of the electromagnetic spectrum. This series is represented by the formula: n=3→(n=4,5,6,...).
Brackett series: This series contains spectral lines emitted by transitions of electrons from upper energy levels to the third excited state, which is represented by n=4. The spectral lines are in the infrared region of the electromagnetic spectrum. This series is represented by the formula: n=4→(n=5,6,7,...). Pfund series: This series contains spectral lines emitted by transitions of electrons from upper energy levels to the fourth excited state, which is represented by n=5. The spectral lines are in the infrared region of the electromagnetic spectrum. This series is represented by the formula: n=5→(n=6,7,8,...). The spectral line series of hydrogen atoms represents a particular series of wavelengths that are emitted when an electron changes its energy level. This phenomenon can be used to study the properties of atoms and to understand the behavior of atoms under different conditions.
To learn more about Spectral line :
https://brainly.com/question/29300755
#SPJ11
Objects X
and Y
are connected by a string of negligible mass and suspended vertically over a pulley of negligible mass, creating an Atwood’s machine, as shown in the figure. The objects are initially at rest, and the mass of Object Y
is greater than the mass of Object X
. As Object Y
falls, how does the gravitational potential energy of the Object X
-Object Y
-Earth system change? All frictional forces are considered to be negligible.
The change in the gravitational potential energy of the Object X-Object Y-Earth system is D. The gravitational potential energy decreases because the center of mass of Object X and Object Y moves downward.
How does the gravitational potential energy change ?As Object Y falls, it loses gravitational potential energy, which is converted into kinetic energy. At the same time, Object X gains gravitational potential energy as it rises. However, since the mass of Object Y is greater than the mass of Object X, the total gravitational potential energy of the system decreases.
The center of mass of the system (Object X and Object Y) moves downward because the heavier object (Object Y) is falling a greater distance than the lighter object (Object X) is rising.
Find out more on the gravitational potential energy at https://brainly.com/question/15896499
#SPJ1
3. Large amplitude vibrations produced when the of receiver of the applied forced vibration matches the
An object's amplitude dramatically increases when the frequency of the applied forced vibrations matches the object's natural frequency. Resonance describes this behavior.
Theory A wave's amplitude directly relates to the quantity of energy it can carry. A wave with a high amplitude carries a lot of energy, whereas one with a low amplitude carries only a little. A wave's strength is determined by the typical energy that moves through a given area in a certain amount of time and in a particular direction.The sound wave's amplitude grows in proportion to its strength. We perceive louder noises to be of higher intensity. Comparative sound intensities are frequently expressed using decibels (dB)For more information on amplitude of vibration kindly visit to
https://brainly.com/question/1380029
#SPJ1
Review For each initial position choose the correct sketch of the mostly path of the shark toward the center of the dipole in
In the given figure, the dipole electrode is represented by the two circles one is red and other is green, and the three initial positions of the shark are represented by the three blue circles.
For the initial position of the shark represented by the top blue circle 1, the most likely path of the shark toward the center of the dipole would be a curved path, as the equipotential lines bend and curve around the dipole electrode. The shark would start by following the equipotential lines to the left, then gradually curve downward and to the right before eventually reaching the center of the dipole.
For the position at the bottom left blue circle 2, the most likely path of the shark would be same as path 1 since the shark would start by following the equipotential lines upward and to the right, then gradually curve downward and to the left before eventually reaching the center of the dipole.
For the position at the bottom right blue circle 3, the most likely path of the shark would be same as path 1 since the shark would start by following the equipotential lines downward and to the left, then gradually curve upward and to the right before eventually reaching the center of the dipole.
To learn more about dipole click here https://brainly.com/question/14123323
#SPJ1
complete question: In experimental tests, sharks have shown the ability to locate dipole electrodes (simulating the dipole fields of the heartbeats of prey animals) buried under the sand. In a test with young bonnethead sharks, sharks that detected the presence of a dipole usually swam toward the center of the dipole by following equipotential lines. Figure P21.35 shows a dipole electrode and three initial positions of a bonnethead shark. For each initial position, sketch the most likely path of the shark toward the center of the dipole.
A ship in the sea moves towards the north at 12.0 ms. An ocean current of 6.00 ms deflects the ship from west to east In which direction will the ship end - up moving.
The ship will end up moving 26.6 degrees east of north.
Bearing of a shipThe ship is initially moving in the north direction, and the ocean current deflects it towards the east direction. To find the resulting direction, we can use the Pythagorean theorem.
The northward velocity of the ship = 12.0 m/s
The eastward velocity caused by the ocean current = 6.00 m/s
Let's call the resulting velocity v.
Using Pythagoras theorem, we have:
v² = (12.0 m/s)² + (6.00 m/s)²
v² = 144 m²/s² + 36 m²/s²
v² = 180 m²/s²
v = sqrt(180 m²/s²)
v = 13.4 m/s (to two significant figures)
Therefore, the ship will end up moving in a direction that is a combination of north and east, with a resulting velocity of 13.4 m/s. We can find the angle of this direction using trigonometry:
tan(theta) = (6.00 m/s) / (12.0 m/s)
theta = atan(0.5)
theta = 26.6 degrees east of north
So the ship will end up moving in a direction that is 26.6 degrees east of north.
More on bearing calculation can be found here: https://brainly.com/question/19511275
#SPJ1
A high-wire artist missteps and falls 9.2 m to the ground. What is her velocity upon landing (just before she strikes the ground)?
Answer:
Explanation:
We can use the kinematic equation to find the velocity of the high-wire artist just before she strikes the ground:
vf^2 = vi^2 + 2ad
where vf is the final velocity (the velocity just before she strikes the ground), vi is the initial velocity (which we can assume is 0), a is the acceleration due to gravity (which is approximately 9.81 m/s^2), and d is the distance fallen (which is 9.2 m).
Plugging in the values, we get:
vf^2 = 0 + 2(9.81 m/s^2)(9.2 m)
Simplifying:
vf^2 = 180.24 m^2/s^2
Taking the square root of both sides:
vf = 13.43 m/s
Therefore, the velocity of the high-wire artist just before she strikes the ground is 13.43 m/s.
Answer:
Below
Explanation:
Explanation:
Her POTENTIAL energy (mgh)
will be converted to KINETIC energy (1/2 mv^2)
so
mgh = 1/2 mv^2 divide both sides of the equation by m
gh = 1/2 v^2 solve for 'v'
v = sqrt ( 2 g h) = sqrt ( 2 * 9.81 * 9.2 ) = 13.4 m/s
Mars' atmosphere is mostly carbon dioxide. why does it not experience a runaway greenhouse effect like Venus?
The main reason why Mars does not experience a runaway greenhouse effect like Venus is that it has a much thinner atmosphere.
The atmospheric pressure on Mars is only about 1% of the atmospheric pressure on Earth, while Venus has an atmosphere that is about 90 times denser than Earth's.
What is greenhouse effect ?
The runaway greenhouse effect occurs when a planet's atmosphere becomes so thick with greenhouse gases that it traps an excessive amount of heat from the sun, causing the planet to become much hotter over time. In the case of Venus, the high atmospheric pressure and its proximity to the sun have contributed to its thick and dense atmosphere, which is about 96% carbon dioxide. This has caused the planet to experience a runaway greenhouse effect, with surface temperatures that can reach up to 864 degrees Fahrenheit (462 degrees Celsius).
What is an atmosphere?
On the other hand, Mars' atmosphere is much thinner and has a much lower concentration of greenhouse gases, including carbon dioxide. Although the atmosphere of Mars is also composed mainly of carbon dioxide (about 95%), the low atmospheric pressure means that it cannot trap enough heat to cause a runaway greenhouse effect. Instead, Mars is colder than Earth, with average temperatures around -80 degrees Fahrenheit (-62 degrees Celsius).
To know more about greenhouse effect, visit:
https://brainly.com/question/13706708
#SPJ1
One end of a massless, 30-cm-long spring with a spring constant of 15 N/m is attached to a 250 g stationary air-track glider; the other end is attached to the track. A 600 g glider hits and sticks to the 250 g glider, compressing the spring to a minimum length of 22 cm . What was the speed of the 600g glider just before impact?
tThe speed of the 600 g glider just before impact was approximately 0.4 m/s.
What is the speed of the glider?To solve this problem, we need to use the conservation of mechanical energy, which states that the initial mechanical energy is equal to the final mechanical energy in a system.
Before the collision, the 250 g glider is stationary, so its kinetic energy is zero. The 600 g glider has an initial kinetic energy of:
KEi = ½ mv²
where;
m is the mass of the 600 g glider and v is its initial velocity.After the collision, the two gliders move together as a single system, and the spring is compressed to a minimum length of 22 cm. At this point, all of the kinetic energy of the system has been converted into potential energy stored in the compressed spring.
The potential energy stored in a spring is given by:
PE = ½ kx²
where;
k is the spring constant and x is the displacement of the spring from its equilibrium position.In this case, the spring is compressed by 30 cm - 22 cm = 8 cm = 0.08 m
from its equilibrium position, so the potential energy stored in the spring is:
PE = ½ kx² = ½ (15 N/m) (0.08 m)² = 0.048 J
Since the total mechanical energy is conserved, we can equate the initial kinetic energy of the 600 g glider to the final potential energy stored in the spring:
KEi = KEf + PE
where;
KEf is the final kinetic energy of the system after the collision.Substituting the expressions for KEi, KEf, and PE, we get:
½ mv² = 0 + 0.048 J
Solving for v, we get:
v = √(2PE/m) = √(2(0.048 J)/(0.6 kg)) = 0.4 m/s
Therefore, the speed of the 600 g glider just before impact was approximately 0.4 m/s.
Learn more about speed of glider here: https://brainly.com/question/1320566
#SPJ1
Consider a building in New York (40°N latitude) that has 76 m² of window area on its south
wall. The windows are double-pane heat-absorbing type, and are equipped with light-colored vene-
tian blinds with a shading coefficient of SC=0.30. Determine the total solar heat gain of the building
through the south windows at solar noon in April. What would your answer be if there were no blinds
at the windows?
The total solar heat gain through the south windows of the building at solar noon in April is approximately 10397 W if the windows have a shading coefficient of 0.30, and it would be approximately 34680 W if there were no blinds at the windows.
Solar radiation intensity: The solar radiation intensity on the surface of the windows can be calculated using the formula:
I = Io * cos(θ) * cos(φ)
where I is the solar radiation intensity on the surface of the windows, Io is the extraterrestrial solar radiation intensity (1367 W/m²), θ is the solar altitude angle (54°), and φ is the azimuth angle (180°). Substituting these values, we get:
I = 1367 * cos(54°) * cos(180°)
I ≈ 455 W/m²
Window area: The window area on the south wall is given as 76 m².
Window type and shading coefficient: The windows have a shading coefficient of 0.30. This means that only 30% of the solar radiation that falls on the windows is transmitted through them, while the remaining 70% is absorbed or reflected.
Total solar heat gain: The total solar heat gain through the south windows of the building at solar noon in April can be calculated as:
Q = I * A * SC
where Q is the total solar heat gain, I is the solar radiation intensity, A is the window area, and SC is the shading coefficient. Substituting the values, we get:
Q = 455 * 76 * 0.30
Q ≈ 10397 W
Therefore, the total solar heat gain through the south windows of the building at solar noon in April is approximately 10397 W if the windows have a shading coefficient of 0.30.
If there were no blinds at the windows, the shading coefficient would be 1.0, meaning that all of the solar radiation that falls on the windows would be transmitted through them. In this case, the total solar heat gain through the south windows would be:
Q = I * A * SC
Q = 455 * 76 * 1.0
Q ≈ 34680 W
Therefore, if there were no blinds at the windows, the total solar heat gain through the south windows of the building at solar noon in April would be approximately 34680 W.
To know more about solar radiation, visit:
https://brainly.com/question/22739106
#SPJ1
A crane lifts an object weighing 25000N up with a constant speed of 0.8m/s. calculate the capacity of that crane
Black hole A has a mass that is twice the mass of black hole B. From this information, you can say that the event horizon of black hole A isa. larger than the event horizon of black hole B.b. smaller than the event horizon of black hole B.c. the same size as the event horizon of black hole B.
Since it is the point of no return when the gravitational pull is so intense that not even light can escape, the event horizon of a black hole is directly correlated to its mass.
Consequently, a broader event horizon would be present around a black hole with a higher mass than one with a lower mass.
StepsWe can infer that black hole A's event horizon is greater than black hole B's event horizon since black hole A is twice as massive as black hole B.
This is because black hole A's bigger mass makes its gravitational pull stronger, and because this stronger gravitational attraction spreads farther from the black hole, it creates a larger event.
The event horizon is the region surrounding a black hole beyond which nothing—not even light—can exist because of the black hole's powerful gravitational pull. It is intimately correlated with the black hole's mass, with wider event horizons being associated with larger black holes.
According to the scenario, black hole A is twice as massive as black hole B. This indicates that because black hole A is more massive than black hole B, its gravitational attraction is stronger.
The black hole's event horizon is greater than black hole B's because of the stronger gravitational force that reaches further from it.
learn more about Black hole here
https://brainly.com/question/6037502
#SPJ1
If a person steps on a scale in an elevator that is accelerating at a rate -1.100 m/s^2 (negative means downward while positive means upwards) and sees a scale reading of 598.900 Newtons what would the scale read if the elevator were not moving?
answer with correct units
Answer:
Explanation:
When the elevator is accelerating downwards, the apparent weight of the person is reduced, and when the elevator is accelerating upwards, the apparent weight is increased.
First, we need to determine the actual weight of the person. We can do this by using the formula:
Weight = mass x gravity
where mass is the mass of the person and gravity is the acceleration due to gravity, which is approximately 9.81 m/s^2.
Weight = (598.900 N) / (9.81 m/s^2) = 61.048 kg
Now, when the elevator is not moving, the person is only experiencing the force due to gravity, which is:
Weight = mass x gravity = (61.048 kg) x (9.81 m/s^2) = 598.78 N
Therefore, the scale would read approximately 598.78 Newtons when the elevator is not moving.
In the 1850s, Inuit life changed when the Americans and British began exploiting the region for?
Oil
Whales
Tourism
Fur
In the 1850s, Inuit life changed drastically when the Americans and British began exploiting the region for fur, oil, whales, and tourism. This exploitation disrupted Inuit communities, negatively affecting the way of life that had been established over centuries. The Inuit were displaced, and their traditional way of life was threatened.
In the 1850s, Inuit life changed when the Americans and British began exploiting the region for Whales.In the 1850s, the Americans and British started exploiting the Arctic region for whales. The Inuit life was greatly impacted as a result of this exploitation. The Inuit people were known for their hunting skills, and they depended on hunting marine mammals for their survival, including whales.
They relied on whale meat for food and whale blubber for fuel to light and heat their igloos. Whales were a vital resource for the Inuit people, and their exploitation by the Americans and British had a significant impact on their livelihood.The whaling industry led to the development of settlements and trading posts, which further disrupted Inuit life. The Inuit's hunting territory was limited, and they were forced to trade for food and supplies, which they previously obtained from hunting.
As a result of these changes, Inuit culture and traditions were disrupted, and they had to adapt to the new way of life. The exploitation of the region for whales by the Americans and British led to a significant change in the Inuit's way of life, which was greatly impacted by their dependence on whale hunting.
For more such questions on exploitation
https://brainly.com/question/11576749
#SPJ11
which magma or lava type is capable of producing the most explosive eruptions (hint: think about viscosity)?
Magmas of the rhyolitic and andesitic kinds are both very explosive. Each one causes volcanoes to erupt with enormous blasts.
What are volcanoes and magma? These kinds of magmas create cinder cones and stratovolcanoes, which are larger volcanoes with numerous layers of ash and lava.Under the surface of the Earth, molten and semi-molten geological mixtures are known as magma. Lava is the term used to describe the rare instances when magma breaches the surface, such as during a volcanic eruption.On land or under water, lava can emerge from a volcano or from a crack in the crust at temperatures typically between 800 and 1,200 °C (1,470 and 2,190 °F).For more information on magma kindly visit to
https://brainly.com/question/16940653
#SPJ1
Complete question : which magma or lava type is capable of producing the most explosive eruptions (hint: think about viscosity)?
A: andesitic magma
B: tephra magma
C:basaltic magma
D:rhyolitic magma
the order of magnitude of the electrical potential generated when 5000 electron volts of work are done on 10 electrons is
A) 1 B) 2 C) 3 D) 4
The order of magnitude of the electrical potential generated is 1 (option A).
What is electric potential?
Electric potential, also known as voltage, is a measure of the electric potential energy per unit charge of an electric field at a given point in space. It is a scalar quantity that is expressed in units of volts (V).
The electric potential at a point in space is defined as the amount of work required to move a unit positive charge from infinity to that point, against the electric field. It is also given by the ratio of the potential energy of a charged particle in an electric field to its charge.
The electrical potential generated when work is done on an electron is given by the formula:
ΔV = ΔW/q
where ΔW is the work done on the electron, and q is the charge of the electron.
Substituting the given values, we get:
ΔV = (5000 eV) / (10 × 1.6 × 10^-19 C)
ΔV = 3.125 × 10^16 V
To determine the order of magnitude of this potential, we can round it to the nearest power of 10. In this case, the number is between 10^16 and 10^17, so we can round it to 10^16.
Therefore, the order of magnitude of the electrical potential generated is 1 (option A).
To know more about magnitude visit :-
https://brainly.com/question/24468862
#SPJ1
Given a = 31+4j- k and b= 1 - 3j+ k,
find a unit vector n normal to the plane
containing a and b such that a, b and n in that form a right handed system
Unit vector n is (7/√6206)i - (30/√6206)j - (97/√6206)k and is a right handed system because of its positive value.
How to determine unit vector?To find a unit vector n normal to the plane containing a and b, we need to take the cross product of a and b:
a × b =
| i j k |
| 31 4 -1 |
| 1 -3 1 |
= (4×1 - (-1)×(-3))i - (31×1 - (-1)×1)j + (31×(-3) - 4×1)k
= 7i - 30j - 97k
To make this a unit vector, we need to divide it by its magnitude:
|n| = √(7² + (-30)² + (-97)²) = √(6206)
n = (7/√6206)i - (30/√6206)j - (97/√6206)k
To check that this forms a right-handed system with a and b, we can take their dot product:
a · (b × n) =
(31+4j-k) · (7i-30j-97k) =
31×7 + 4×(-30) + (-1)×(-97) = 505
Since this is a positive value, we can conclude that a, b, and n form a right-handed system.
Learn more on unit vector here: https://brainly.com/question/28028700
#SPJ1
(Current into the A student is measuring the magnetic field generated by a long straight wire carrying a constant Current A mag Beld probe is held at various distances from the wire, as shown above, and the magnetic field is measured The graph below shows the five data points the student measured and a best curve for the data Unfortunately, the student forgot about Earth's magnetic feld, which has a value of 50 x 10 Tat this location and is directed north (a) On the graph plot new points for the feld due only to the wire (b) Calculate the value of the current in the wire 5X10-3 = 5x104 b=NI Magni Free Reses 0 1. Awie wire 0 001 02 03 04 05 06 0 0 Distanum) Another student who does not have a magnetic field probe uses a compass and the known value of Earth's magnetic field to determine the magnetic field generated by the wire. With the current fumed off the student places the compass 0.040 m from the wire, and the compass points directly toward the wire as shown below. The student then turns on a 35 A current directed into the page. Wire (no current) (c) On the compass, sketch the general direction the needle points after the current is established то 150 Nith (d) Calculate how many degrees the compass needle rotates from its initial position pointing directly north. The wire is part of a circuit containing a power source with an emf of 120 V and negligible internal resistance South - Cs tant (17-1 Nuls Figures d e sale 2. A SO Om wire we perpendicular to a F= Il a (e) Calculate the total resistance of the circuit V: IR ( Calculate the rate at which energy is dissipated in the circuit P R
a) To plot the points for the field due only to the wire, we can calculate the magnitude of the magnetic field due to the wire at each of the given distances.
What is magnetic field?A magnetic field is an invisible force field created by a magnet or electric current. It is an invisible force that exists around a magnet or a current-carrying conductor.
We can do this using the equation B=μI/2πr, where μ is the permeability of free space (4π x 10-7 Tm/A), I is the current, and r is the distance from the wire. For each point on the graph, we can calculate the value of B due to the wire and plot it on the graph. The points should form a straight line since the magnetic field due to a current in a wire is constant.
b) We can calculate the value of the current in the wire using the equation B=μI/2πr. Since we know the value of B (5x10-3 T) and the value of r (0.040 m), we can solve for I. We get I=5x104 A.
c) The general direction the compass needle will point after the current is established will be south, since the magnetic field due to the current in the wire will be opposite to the direction of the Earth's magnetic field.
d) The total rotation of the compass needle from its initial position pointing directly north will be 180 degrees, since the magnetic field due to the wire will oppose the direction of the Earth's magnetic field.
e) We can calculate the total resistance of the circuit using the equation V=IR, where V is the voltage (120 V) and I is the current (35 A). We get R = 3.43 Ω.
f) We can calculate the rate at which energy is dissipated in the circuit using the equation P=VI, where V is the voltage (120 V) and I is the current (35 A). We get P = 4.2 kW.
To learn more about magnetic field
https://brainly.com/question/14411049
#SPJ1
in simple harmonic motion, when is the magnitude of the acceleration the greatest? (there could be more than one correct choice.)
In simple harmonic motion, the magnitude of the acceleration is maximum when the displacement is maximum, which is at the equilibrium position.
Simple harmonic motion (SHM) is a form of motion in which an object oscillates (moves back and forth) under a restoring force that is proportional to the object's displacement from its equilibrium position. The object moves towards its equilibrium position under the influence of this force when it is displaced from its equilibrium position. In a spring-mass system, for example, when a spring is stretched or compressed, a restoring force proportional to the amount of stretching or compression is created. When the spring is released, the restoring force pushes the mass back toward its equilibrium position, causing it to oscillate back and forth. There are numerous examples of SHM in daily life, including the motion of a simple pendulum and the motion of a mass attached to a spring. The magnitude of the acceleration is maximum when the displacement is maximum, i.e., at the equilibrium position.
To learn more about Simple harmonic motion :
https://brainly.com/question/27237546
#SPJ11
looking for net force of Q1
The net force is negative, which means it is directed towards q₂ and q₃, in the opposite direction to q1.
What is Coulomb's constant?Coulomb's constant (k) is a proportionality constant found in Coulomb's law. Coulomb's law describes the electrostatic force between two point charges and states that the force is proportional to the product of the charges and inversely proportional to the square of the distance between them.
The mathematical expression for Coulomb's law is:
F = k *q₁* q₂ / r²
where F is the electrostatic force between two point-charges q1 and q2, separated by a distance r. The constant k is known as Coulomb's constant and has a value of approximately 9 × 10⁹ N·m²/C².
The net force on particle q1 is the vector sum of the forces exerted on it by particles q₂ and q₃, which can be calculated using Coulomb's law:
F12 = k * q₁ * q₂ / r₁₂²
F23 = k * q₂ * q₃ / r₂₃²
where k is Coulomb's constant (9 × 10⁹ N·m²/C²), r₁₂ and r₂₃ are the distances between q₁ and q₂, and q₂ and q₃, respectively.
Since the particles are in a straight line, the forces F₁₂ and F₂₃ will be in opposite directions and will cancel each other out to some extent. q1will have net force:
F net = F₁₂ + F₂₃
To calculate the net force, we need to plug in the given values:
q₁ = -2.35 × 10⁻⁶ C
q₂ =-2.35 × 10⁻⁶ C
q₃= -2.35 × 10⁻⁶ C
r₁₂ = r23 = 0.100 m
Substituting these values, we get:
F₁₂ = (9 × 10⁹ N·m²/C²) * (-2.35 × 10⁻⁶ C)² / (0.100 m)²
= -4.396 N
F₂₃ = (9 × 10⁹ N·m²/C²) * (-2.35 × 10⁻⁶ C)² / (0.100 m)²
= -4.396 N
Therefore, the net force on q1 is:
F net = F₁₂ + F₂₃
= -4.396 N + (-4.396 N)
= -8.792 N
To know more about Coulomb's law, visit:
https://brainly.com/question/506926
#SPJ1
what is one way to increase the momentum of an object
1 . decrease aerodynamics
2. decrease velocity
3. increase friction
4. increase force
Explanation:
Momentum = mv so the most likely way to increase an object's momentum would be to increase its velocity
Two moles of oxygen gas, which can be regarded as an Ideal gas with Cv = 22,1 JK 'mol, are maintained at 273k in a volume of 0,1 m ³ under 1 Sothermal conditions. Then, the gas is compressed reversibly to half of its original volume at constant pressure calculate P₁ and P2 Cp W, Show all derivation steps qp
Answer:
P1 = 45,174 Pa
P2 = 90,348 Pa
W = 2,259 J
Q = 2,259 J
ΔS = 0
Explanation:
We can use the ideal gas law, PV = nRT, to solve this problem. Since the gas is at constant temperature (isothermal), we can simplify this to PV = constant.
Given that there are two moles of oxygen gas in a volume of 0.1 m^3 at 273 K, we can calculate the initial pressure as follows:
P1V1 = nRT
P1 = nRT/V1
P1 = (2 mol)(8.31 J/mol.K)(273 K)/(0.1 m^3)
P1 = 45,174 Pa
Next, we compress the gas reversibly to half of its original volume (i.e. V2 = 0.05 m^3) at constant pressure. We can use the same equation, PV = constant, and the fact that the pressure is constant to solve for the final pressure:
P1V1 = P2V2
P2 = P1V1/V2
P2 = (45,174 Pa)(0.1 m^3)/(0.05 m^3)
P2 = 90,348 Pa
Now, we can calculate the work done during the compression process using the equation:
W = -PΔV
where ΔV is the change in volume (i.e. V2 - V1 = -0.05 m^3), and the negative sign indicates that work is done on the system during compression. Substituting the values, we get:
W = -(45,174 Pa)(-0.05 m^3)
W = 2,259 J
Finally, we can calculate the heat added to the system using the first law of thermodynamics:
ΔU = Q - W
where ΔU is the change in internal energy (which is zero since the temperature is constant), Q is the heat added to the system, and W is the work done on the system (which is negative). Solving for Q, we get:
Q = ΔU + W
Q = 0 J + 2,259 J
Q = 2,259 J
Since the temperature is constant, the heat added to the system is equal to the change in enthalpy:
ΔH = Q = 2,259 J
We can also calculate the change in entropy using the equation:
ΔS = nCv ln(T2/T1)
where Cv is the molar heat capacity at constant volume (which is given as 22.1 J/K.mol), and ln(T2/T1) is the natural logarithm of the ratio of final and initial temperatures. Since the temperature is constant, ΔS = 0.
Therefore, the final answers are:
P1 = 45,174 Pa
P2 = 90,348 Pa
W = 2,259 J
Q = 2,259 J
ΔS = 0
could a solenoid suspended by a string be used as a compass
Answer:
Could a solenoid suspended by a string be used as a compass
Explanation:
Yes, a solenoid suspended by a string can be used as a compass. A solenoid is a coil of wire that produces a magnetic field when an electric current flows through it. When suspended by a string, a solenoid will naturally align itself with the Earth's magnetic field, similar to how a compass needle aligns itself with the Earth's magnetic field.
To use a solenoid as a compass, you would need to connect the ends of the coil to a battery or other power source to produce an electric current. The current flowing through the coil will create a magnetic field, causing the coil to align itself with the Earth's magnetic field. By observing the direction in which the solenoid is pointing, you can determine the direction of North.
However, it should be noted that using a solenoid as a compass may not be as accurate as using a traditional compass. The alignment of the solenoid may be affected by nearby sources of magnetic interference, and the strength of the solenoid's magnetic field may vary depending on the amount of current flowing through it.
Find the net electric flux through a spherical closed surface of two charges +1.00nc and -3.00nC embedded inside and a +2.00nC outside.
Answer:
Explanation:
To find the net electric flux through a closed surface, we need to apply Gauss's law:
Phi_E = Q_enclosed / epsilon_0
where Phi_E is the electric flux, Q_enclosed is the net charge enclosed by the closed surface, and epsilon_0 is the electric constant.
Let's consider a spherical closed surface of radius R enclosing the charges. We can divide the surface into two regions: inside and outside the sphere.
For the charges inside the sphere, the net charge enclosed is:
Q_enclosed = +1.00 nC - 3.00 nC = -2.00 nC
Therefore, the electric flux through the inner surface of the sphere is:
Phi_E_inside = Q_enclosed / epsilon_0 = (-2.00 nC) / epsilon_0
For the charge outside the sphere, the net charge enclosed is:
Q_enclosed = +2.00 nC
Therefore, the electric flux through the outer surface of the sphere is:
Phi_E_outside = Q_enclosed / epsilon_0 = (2.00 nC) / epsilon_0
The net electric flux through the closed surface is the sum of the electric flux through the inner and outer surfaces:
Phi_E_net = Phi_E_inside + Phi_E_outside = (-2.00 nC) / epsilon_0 + (2.00 nC) / epsilon_0
= 0
Therefore, the net electric flux through the closed surface is zero. This means that the total amount of electric field lines entering the surface is equal to the total amount of electric field lines leaving the surface. This result is consistent with Gauss's law, which states that the net electric flux through a closed surface is proportional to the net charge enclosed by the surface. In this case, since the net charge enclosed is zero, the net electric flux is also zero.
A group of students conduct an experiment to study Newton's second law of motion. They applied a force to a toy car and measure its acceleration. The table shows the results.
Force (N) Acceleration (m/s²)
2.0 5.0
3.0 7.5
6.0 15.0
If the students graph the data points, which conclusion will they be able to make?
The data points will fall along a line. This shows that as the force increases, the acceleration increases.
Newton's second law of motion is the fundamental law of motion in classical mechanics.
The data points will fall along a line. This shows that as the force increases, the acceleration increases.
A group of students conduct an experiment to study Newton's second law of motion. They applied a force to a toy car and measure its acceleration.
The Force (N) and Acceleration (m/s²) measurement of the group of students, as seen in the table, is given as 2.0 and 5.0, 3.0 and 7.5, and 6.0 and 15.0 respectively.
As the group of students will graph the data points, they will be able to conclude that the data points will fall along a line. This shows that as the force increases, the acceleration increases.
The law is also known as the force law, and it is a fundamental principle of classical mechanics. It defines the relationship between an object's motion and the forces acting upon it.
for such more question on fundamental law
https://brainly.com/question/18805035
#SPJ11
1. Background Q1: When you shine a laser with unknown wavelength through a diffraction grating with
1000slits/mm
, you observe the
m=1
bright fringe on the screen with an angle of 26 degrees away from the center of the grating. What is the wavelength of your laser? Using Figure 1 (freel free to screenshot, copy it, or draw your own version into your pre-lab document), label the information that you know about each part of the diagram, and what you are trying to find. Be clear about where exactly the angle measurement fits into the diagram. Figure 1. Schematic of experiment setup such that
M=±1
and
M=0
positions can be compared to determine the unknown wavelength of light coming from the laser pointer.
The wavelength of the laser is 52.24 nm.
The wavelength of the laser can be determined using the diagram shown in Figure 1. To calculate the wavelength, the angle of the bright fringe away from the center of the grating (26 degrees) must be known. This angle can be measured using the angle θ shown in the diagram. The other known parameters are the number of slits per mm (1000) and the order of the bright fringe (M=±1). Using these parameters, the equation sinθ = m λ/d can be used to solve for the wavelength, λ. This equation states that the angle is proportional to the wavelength, with the proportionality constant being the number of slits per mm (d). Substituting the known values yields the wavelength, λ, of the laser as
λ = (d sin θ)/m = (1000sin26)/±1 = 52.24 nm.
To learn more about Wavelength :
https://brainly.com/question/10728818
#SPJ11
the 50-mm-diameter a992 steel shaft is subjected to the torques shown. determine the angle of twist of the end a.
The angle of twist of end A is 0.0150 radians or 0.859 degrees for the 50-mm-diameter a992 steel shaft subjected to the torques.
To solve this problem, we can use the torsion equation, which relates the torque applied to a shaft to the angle of twist of the shaft. The equation is:
T/J = Gθ/L
where T is the torque applied to the shaft, J is the polar moment of inertia of the shaft, G is the shear modulus of elasticity of the material, θ is the angle of twist of the shaft, and L is the length of the shaft between the points where the torque is applied.
For the first section of the shaft between points B and C, we can calculate the polar moment of inertia using the formula for a solid circular shaft:
J = (π/32) × ([tex]d^4[/tex])
where d is the diameter of the shaft. Plugging in the values given, we get:
J = (π/32) × [tex](50 mm)^4[/tex] = 6.34×[tex]10^6[/tex] [tex]mm^4[/tex]
The length of this section is given as 300 mm, and the torque applied is 40 Nm. Therefore, we can calculate the angle of twist using the torsion equation:
θ = TL/JG
= (40 Nm)(300 mm)/(6.34 × [tex]10^6[/tex] [tex]mm^4[/tex])(77 GPa)
= 0.000293 rad or 0.0168 degrees
For the second section of the shaft between points C and D, we can use the same formula to calculate the polar moment of inertia, but the length and torque are different:
J = (π/32) × [tex](50 mm)^4[/tex] = 6.34×[tex]10^6[/tex] [tex]mm^4[/tex]
L = 600 mm, T = 200 Nm
θ = TL/JG
= (200 Nm)(600 mm)/(6.34 × [tex]10^6[/tex] [tex]mm^4[/tex])(77 GPa)
= 0.00294 rad or 0.168 degrees
For the final section of the shaft between points D and A, we again use the same formula, but with different length and torque values:
J = (π/32) × [tex](50 mm)^4[/tex] = 6.34×[tex]10^6[/tex] [tex]mm^4[/tex]
L = 600 mm, T = 800 Nm
θ = TL/JG
= (800 Nm)(600 mm)/(6.34×[tex]10^6[/tex] [tex]mm^4[/tex])(77 GPa)
= 0.0118 rad or 0.677 degrees
The total angle of twist of the shaft from end A to end B is simply the sum of the angle of twists for each section:
θ_total = θ_BC + θ_CD + θ_DA
= 0.000293 rad + 0.00294 rad + 0.0118 rad
= 0.0150 rad or 0.859 degrees
Learn more about the torque at
https://brainly.com/question/25708791
#SPJ4
The question is -
The 50-mm-diameter a992 steel shaft is subjected to the torques shown. determine the angle of twist of the end a.
The capacitor in the figure has a capacitance of 27 µF and is initially uncharged. The battery provides a potential difference of 116 V. After switch S is closed, how much charge will pass through it?
The charge that passes through the capacitor is 3.132 mC (milli Coulombs). Therefore, option B. 3.132 mCis the correct answer.
The circuit shown below is a simple circuit consisting of a battery, a capacitor, and a switch.
The capacitance of the capacitor is 27 µF, and it is initially uncharged. After switch S is closed, how much charge will pass through it?
Circuit diagram with a capacitor
The expression for the amount of charge (Q) that passes through the capacitor is
Q = CΔV,
where, C is the capacitance of the capacitor and
ΔV is the potential difference between the plates of the capacitor.
Q = CΔV = (27 × 10-6 F)(116 V)
Q = 3132 × 10-6 C
Q = 3.132 mC
The charge that passes through the capacitor is 3.132 mC (milli Coulombs).
for such more question on capacitor
https://brainly.com/question/21851402
#SPJ11
I need some help with this problem
Tensile force refers to the stretching forces that operate on a substance and consists of two components: tensile tension and tensile strain. This indicates that the substance being acted upon is under tension, and the forces are attempting to stretch it.
What Does Tensile Force Mean?Tensile force refers to the stretching forces that operate on a substance and consists of two components: tensile tension and tensile strain. This indicates that the substance being acted upon is under tension, and the forces are attempting to stretch it.
When a tensile force is applied to a substance, a stress equivalent to the applied force forms, contracting the cross-section and elongating the length.
Learn more about Tensile Force
https://brainly.com/question/17077889
#SPJ1
find the tension in each of the three cables supporting the traffic light if it weighs 190 n.
The tension in each of the three cables supporting the traffic light is T1 = 72.96 N, T2 = 84.77 N, and T3 = 62.85 N.
To determine the tension in each of the three cables supporting the traffic light if it weighs 190 N, we can use vector addition. Let's consider the diagram of the situation first: Three cables are attached to the traffic light, holding it in place. Assume that the angles at which the cables are positioned are 45°, 60°, and 75°, as shown in the figure below. [tex]\sum[/tex]Fy = 0,
as the traffic light is stationary in the vertical direction, so there is no net force acting in the y-direction.
Now let's calculate the tension in each of the cables one by one. Let's begin with the horizontal forces:
[tex]\sum[/tex]Fx = 0 [tex]\implies[/tex] T1 cos 45° + T2 cos 60° - T3 cos 75° = 0. (1)
The force equation in the vertical direction is as follows:
[tex]\sum[/tex]Fy = 0 [tex]\implies[/tex] T1 sin 45° + T2 sin 60° + T3 sin 75° = mg (2)
T1 = (T3 cos 75° - T2 cos 60°) / cos 45° (from equation (1)).
Substituting this value in equation (2), we obtain:
T3 sin 75° - T2 sin 60° + T3 sin 75° = mg sin 45° (3)
From equation (3), we can solve for T2 and T3:
T2 = (2T3 cos 75° + mg sin 45°) / 3T3 = (T2 cos 60° - T1 cos 45°) / cos 75°
Now we can substitute these values into equation (1) to obtain the numerical values of T1, T2, and T3:
T1 = 72.96 NT2 = 84.77 NT3 = 62.85
To learn more about Tension :
https://brainly.com/question/24994188
#SPJ11
find the distance of the imaged formed by an object placed 7 cm away from a lens with a focal length of 14 cm. Describe the image produced by the lens. What happens if the object is moved further away from the lens?
When the object is moved further away from the lens, the size of the image formed becomes smaller and the image moves closer to the focus of the lens. If the object is moved to infinity, the image is formed at the focus of the lens.
According to the given problem, we have to find the distance of the image formed by an object placed 7 cm away from a lens with a focal length of 14 cm.
Lens formula is given by:1/f = 1/v - 1/u
Here,f = focal length of the lens
v = image distance
u = object distance
For image distance, we can write
v = (fu)/(f + u)
Putting the values, we get
v = (14 × 7)/(14 + 7) = 98/21 cm
Therefore, the distance of the image formed is 98/21 cm.Image produced by the lens:If the object is placed at a distance less than the focal length of the lens, the image formed is virtual, erect and magnified. If the object is placed at a distance greater than the focal length of the lens, the image formed is real, inverted and diminished.
for such more question on object is move
https://brainly.com/question/29762901
#SPJ11
What would the best cost to each person in the United States given that the total cost is •10^14 dollars
Answer:
3,012,955.71 USD per person
Explanation:
The U.S. as of 2021 had 331.9 million inhabitants
Total cost of 10^14 USD to be divided by 331.9m inhabitants to obtain the cost per person
3,012,955.71 USD per person