The SMART technique for problem solving
was introduced. In this approach, S stands for
specific
measurable
achievable
realistic
, M stands for
"
A stands for
"
R stands for
"
and T stands for

Answers

Answer 1

Note that the SMART technique for problem-solving and goal-setting was introduced. In this approach:

S stands for specificM for measurableA for achievableR for realisticand T stands for Time Bound.

What is problem-solving?

The act of describing a problem, discovering the origin of the problem, finding, prioritizing, and selecting alternatives for a solution, and executing a solution is known as problem-solving.

Employers value problem-solving abilities because they demonstrate a variety of other qualities such as logic, creativity, resilience, imagination, lateral thinking, and drive. It is a necessary ability for both your professional and personal life.

Learn more about Problem-Solving:
https://brainly.com/question/29438624
#SPJ1


Related Questions

The displacement of a particle which moves along the s-axis is given by; = (−2 + 3)−0.5 Where s is in meters and t is in seconds. Determine the time at which the acceleration is zero.

Answers

The time at which the acceleration is zero is given as 4.66 seconds

How to solve for the time

First we have to solve for the velocity. To do this, we would have to take the derivative.

[tex]s = e^-0.5t (3 t - 2)[/tex]

Then velocity =

[tex]ds/dt = e^-0.5t (4 - 1.5 t)[/tex]

The acceleration can be gotten by finding the second derivative

[tex]a = dv/dt = e^-0.5t (.75 t - 3.5)[/tex]

To find t at acceleration = 0

We have

[tex]0 = e^-0.5t (.75t - 3.5)[/tex]

This gives t to be

t = 4.66 sec

Complete question

The displacement of a particle which moves along the s-axis isgiven by

s = (-2+3t)e^(-0.5t), where s is in meters and t is inseconds. Plot the displacement, velocity and acceleration versustime for the first 20 seconds of motion. Determine the time atwhich the acceleration is zero.

Read more on acceleration here:

https://brainly.com/question/605631

#SPJ1

a. Calculate the equivalent resistance of the circuit

Answers

Answer:

no any think photo.

Explanation:

Determine the carburizing time necessary to achieve a carbon concentration of 0.30 wt.% at a position of 4 mm into an iron-carbon alloy that initially contains 0.10 wt.% C. The surface concentration is to be maintained at 0.90 wt.% C, and the treatment is to be conducted at C. Use the diffusion data for -Fe in Table 5.2

Answers

The carburizing time necessary to achieve a carbon concentration is 31.35 hours

How to find the Carburizing Time?

To determine the carburizing time necessary to achieve the given carbon concentration, we will use the equation:

(Cs - Cx)/(Cs - C0) = ERF(x/2√Dt)

where;

Cs is Concentration of carbon at surface = 0.90

Cx is Concentration of carbon at distance x = 0.30

Distance x = 4 mm = 0.004 m

C0 is Initial concentration of carbon = 0.10

ERF() = Error function at the given value

D = Diffusion of Carbon into steel

t = Time necessary to achieve given carbon concentration ,

Thus, plugging in the relevant values gives;

(Cs - Cx)/(Cs - C0) = (0.9 - 0.3)/(0.9 - 0.1)

= 0.6/0.8 = 0.75

now, ERF(z) = 0.75 and as such using ERF table, we can say that;

Z = 0.814. Thus;

(x/2√Dt) = 0.81

Using the table of diffusion data, we have;

At a temperature of  (1100°C) or 1373 K, we have;

D = 5.35 × 10⁻¹¹ m²/sec.

Calculating the carbonizing time by using the equation z = (x/2√Dt);

where;

t is carbonizing time

Thus;

0.814 = (0.004/(2 × √5.35 × 10⁻¹¹ × √t))

0.814 = 0.004 /(1.4628 × 10⁻⁵ × √t)

0.814 × 1.4628 × 10⁻⁵ × √t = 0.004

1.19072 × 10⁻⁵ × √t = 0.004  

√t = 0.004/(1.19072 × 10⁻⁵)

√t = 335.93

t = 112848.96 seconds

Converting to hours gives;

t = 112848.96/3600

t = 31.35 hours

Therefore, the carburizing time necessary to achieve a carbon concentration is 31.35 hours

Read more about Carburizing Time at; https://brainly.com/question/13031810

#SPJ1

Which load balancing method is supported in equal cost multipath (ECMP) load balancing when SD-WAN is enabled

Answers

Volume load balancing method is supported in equal cost multipath (ECMP) load balancing when SD-WAN is enabled.

What is load balancing method?

Load balancing means are regarded as a form of an algorithms or method that is used to rightly share an incoming server request or traffic in the midst or among servers that is from the server pool.

Note that Volume load balancing method is supported in equal cost multipath (ECMP) load balancing when SD-WAN is enabled as that is its role.

Learn more about Volume load balancing from

https://brainly.com/question/28021339

#SPJ1

Datums and benchmarks are used for ______

Answers

Answer:

Measuring elevations

Explanation:

hope this helps you ♡´・ᴗ・`♡

What is the mode of operation of a ramp digital voltimeter​

Answers

Answer:

The operating principle of a ramp type digital voltmeter is to measure the time that a linear ramp voltage takes to change from level of input voltage to zero voltage (or vice versa).

If a dielectric material, such as teflon®, is placed between the plates of a parallel-plate capacitor without altering the structure of the capacitor, how is the capacitance affected?.

Answers

The capacitance is affected is that the capacitance increases because of the insertion of Teflon.

What is capacitance?

A `is known to be a form of a device that is said to be used to save some amount of charges in any electrical circuit.

Note that the capacitor functions on the principle that the capacitance of a conductor is said to increases if an earthed conductor is  taken close to it.

Hence, The capacitance is affected is that the capacitance increases because of the insertion of Teflon.

See full question below

A dielectric material, such as Teflon®, is placed between the plates of a parallel-plate capacitor without altering the structure of the capacitor. The charge on the capacitor is held fixed. How is the electric field between the plates of the capacitor affected?

The electric field is not altered, because the structure remains unchanged.

The electric field becomes zero after the insertion of the Teflon®.

The electric field decreases because of the insertion of the Teflon®.

The electric field becomes infinite because of the insertion of the Teflon®.

The electric field increases because of the insertion of the Teflon®.

Learn more about  electric field  from

https://brainly.com/question/14781269

#SPJ1

based on the graph shown, for any given output level, the veritcal distance between the avc and the atc curves represents

Answers

A a result of the graph shown, for any given output level, the veritcal distance between the avc and the atc curves represents total fixed cost (TFC).

What is Vertical distance?

This is known as vertical separation and it is said to be the distance that exist between two vertical positions.

Note that vertical coordinates are seen for expressing vertical position: depth, and others and as such,

See full question below

The vertical distance between the ATC and AVC curve represents

a) marginal cost (MC)

b) average fixed cost (AFC)

c) total fixed cost (TFC)

d) total cost (TC) - total variable cost (TVC)

Learn more about from

https://brainly.com/question/210650

#SPJ1

Assignment: Explain any three
ways that research can facilitate
the work of building technicians.

Answers

The three ways that research can facilitate the work of building technicians is that:

They will know the timeframe to start and complete the buildingThey will know the type and right materials to use.It will help them in the area of budgeting of equipment, tools and building materials needed.

What do building technicians do?

Building technicians are known to be people who help with some tasks around construction projects and building works.

Note that building technician overseeing a scope of tasks such as monitoring build progress and as such The three ways that research can facilitate the work of building technicians is that:

They will know the timeframe to start and complete the buildingThey will know the type and right materials to use.It will help them in the area of budgeting of equipment, tools and building materials needed.

Learn more about technicians from

https://brainly.com/question/1548867

#SPJ1

The lights on your vehicle must be turned on at any time, day or night, when persons and vehicles cannot be clearly seen for ___ feet.

Answers

Answer:

500 feet

Explanation:

In order to stop or turn your vehicle around on the highway you must have 500 feet of clear road in both directions. 4. Headlights are required at any time you cannot see persons or vehicles for 500 feet, due to snow, dust, fog, etc. and from ½ after sunset to ½ before sunrise.Hope this helps

The lights on your vehicle must be turned on at any time, day or night, when persons and vehicles cannot be clearly seen for 1000 feet.

What are vehicles?

A vehicle is a piece of equipment, typically with wheels and an engine, used for land-based transportation of people or goods. Cars, buses, and trucks are examples of road vehicles. Farm vehicles include tractors.

Vehicle type refers to a group of power-driven vehicles that share all crucial aspects of their engines, cars, and OBD systems.

When a vehicle is 500 feet away, the driver must dim his headlights.

Avoid looking directly into the light when a car is coming at you; instead, slow down. At least 30 minutes before dusk, headlights must be activated. It is also important to keep in mind that a lower headlight beam improves the driver's ability to see in fog.

Thus, it should be 1000 feet distance.

For more details regarding vehicles, visit:

https://brainly.com/question/29491014

#SPJ2

How are new slip rings attached to the rotor core during alternator rebuilding?

Answers

The new slip rings is been  attached to the rotor core during alternator rebuilding by b. Soldered on.

What is the process of Soldering ?

Soldering  is the use of Solder which is a metal alloy  consisting tin and lead and is the way of joining  different types of metals together by melting solder.

This is been used on new slip rings to get it  attached to the rotor core during alternator rebuilding .

Learn more about Soldering on:

https://brainly.com/question/25759088

#SPJ1

CHECK THE COMPLETE QUESTION BELOW:

How are new slip rings attached to the rotor core during alternator rebuilding?

a. Machine clamped

b. Soldered on

c. Crimped on

d. epoxy glue

If extension done in a stork position, during backward bending in a standing position of a special test for lumbar spine, produces pain in the lumbar or sacral regions of the spine, it may indicate _____.

Answers

The answer is 7 because I just took the test!

Through Engineering, human achievement continues to advance. Write about your favorite example of engineering in action and what impresses you about it from an Engineering standpoint.

Answers

Hydroelectric power plants are outstanding engineering devices that allow people to obtain energy from renewable sources.

What is a hydroelectric power plant?

A hydroelectric power plant is a center for the production of electricity based on hydropower energy systems.

Hydroelectric power plants exploit the energy of water masses (e.g., a stream) to produce clean energy for million of people around the world.

These plants have generators capable of converting mechanical energy  into electricity by using simple turbines.

In conclusion, hydroelectric power plants are outstanding engineering devices that allow people to obtain energy from renewable sources.

Learn more about Hydroelectric power plants here:

https://brainly.com/question/8934285

#SPJ1

To put out a class D metal fire, you must _______ the fire.

Answers

To put out a class D metal fire, you must smother the fire and eliminate the oxygen element in the fire.

What is a Class D fire?

A class D fire is a type of fire that cannot be extinguished by water. This is because adding water to it reacts with other elements in the fire intensifying the fire even more.

Smothering in this context involves adding a solution like carbon dioxide (CO2) into the fire, this results in a reduction of oxygen in the atmosphere surrounding the class D fire.

By so doing, smothering the fire eliminates the oxygen element in the fire, thereby extinguishing the fire.

You can learn more about extinguishing fires here https://brainly.in/question/760550

#SPJ1

In 2001, a land-development company launched an engineering project on land adjacent to a protected wetlands area

Answers

The statement that summarizes the data is that the population data should be collected over a much lingers period of time in order to draw a valid conclusion.

What is data?

It should be noted that data simply means the facts or statistics that are put together to get more information about a particular issue.

It should be noted that a project simony refers to an individual or collaborative enterprise which is planned in order to achieve a particular aim. In this case, the land-development company launched an engineering project on land adjacent to a protected wetlands area.

It should be noted that the time frame that the data was collected matters a lot in order to get a valid conclusion.

In this case, the statement that summarizes the data is that the population data should be collected over a much lingers period of time in order to draw a valid conclusion.

Learn more about data on:

brainly.com/question/4219149

#SPJ1

The options to the question:

a. The data Gail to represent a broad diversity of species and so do not provide enough information to adequately draw a conclusion.

b. Population data were not sampled frequently enough to draw a valid conclusion.

c. The data show stable population trends in native species providing evidence that the engineering project has no negative impact on the ecosystem.

d. The population data should be collected over a much lingers period of time in order to draw a valid conclusion.

A light weight vehicle traveling 50 mph can stop in approximately
a. 200 meters.
b. 5 blocks.
c. 200 feet.
d. 6 seconds.

Answers

A light weight vehicle traveling 50 mph can stop in approximately 200 feet.

How a car break works?

The break system of a car is composed by several items that are always working together to slow down and bring a vehicle to a complete stop. It also has the function of keeping the car stationary when it is parked. In general, this system has two manual activation modes: the lever and the pedal, with the exception of vehicles adapted for people with disabilities.

Most vehicles today use the disc brake system. Disc brakes work by using pads, which are held inside a hydraulic caliper, receiving pressure to brake. Such pads generate friction on a disc, which makes the vehicle stop permanently.

The drum brake is another type, being older and dependent on the famous linings to cause friction in the wheel and stop the vehicle. A hydraulic cylinder makes the plies move inside the drum, which is a hollow part fastened with screws and attached to the wheels. This type of brake is on the rear wheels, for the most common models.

See more about engineering at: brainly.com/question/19117846

#SPJ1

A company is currently paying its employees $0.38 per mile to drive their own cars on company business. The company is considering supplying employees with cars, which would involve purchasing at $25,000 with an estimated three-year life, a net salvage value of $8,000, taxes and insurance at a cost of $900 per year, and operating and maintenance expenses of $0.22 per mile. If the interest rate is 10% and the company anticipates an employee’s annual travel to be 22,000 miles, what is the equivalent cost per mile (neglecting income taxes)?

Answers

The equivalent cost per mile is mathematically given as

Equivalent kilometer =  0.61

What is Distance?

Distance is a measure of the distance between two places. Depending on context, the term "distance" might refer to a precise measurement or an approximation based on other factors. |AB| can be used to represent the distance between two points.

What is an Equivalent cost per mile?

Generally, the equation for Equivalent annual cost  is  mathematically given as

EAC= $ 25,000 ( A/P, 10% , 3 years ) + $ 900 + $ 0.22 * 22,000 - $ 8000 ( A/F , 10% , 3 years)

Therefore

EAC= $ 25,000 * 0.402115 + $ 5740 - $ 8000 * 0.302115

EAC= $ 13,375.955

In conclusion, the Equivalent cost per kilometer

Equivalent kilometer [tex]=\frac{ 13,375.955}{22,000}[/tex]

Equivalent kilometer =  0.61

Read more about Equivalent kilometers

https://brainly.com/question/14332835

#SPJ1

The only difference between all GMA welding machines and some FCA welding machines is that all GMA welding machines must have a ______________.

Answers

Answer: Shielding gas solenoid

Explanation:

If your crew is the first to arrive on the scene of a major mci, what will be a major aspect of your scene size-up?

Answers

If your crew is the first to arrive on the scene of a major MCL, The major aspect of your scene size-up will be to Make a sweep to determine what needs must be met. Option D. This is further explained below.

What is the scene of an MCL?

Generally, If your team is the first to arrive at the scene of a significant MCL, the most important part of your scene size-up will be to do a sweep to identify the requirements that need to be satisfied. Choose option D.

In conclusion, A medial collateral ligament (MCL) injury occurs when the ligament on the inside of the knee is stretched, partially torn, or completely ruptured. Most knee injuries are caused by an excessive amount of valgus stress on the knee, which is one of the most prevalent.

Read more about the scene of an MCL

https://brainly.com/question/13184254

#SPJ1

CQ

If your crew is the first to arrive on the scene of a major​ MCI, what will be a major aspect of your scene​ size-up?

A.

Make an initial scene report to the communications center.

B.

Control​ on-scene communication as help arrives.

C.

Prevent uncoordinated or undirected activity at the scene.

D.

Make a sweep to determine what needs must be met.

The advantage of using a reference line to position a building is that

Answers

Answer:

The reference line helps you achieve the precise connection of Walls for clean intersections.

Explanation:

Reference Lines allow you to place lines on the plot at specific locations to mark important values. You could use these to mark control limits or to indicate a trend line for a set of data.

When passing another car, make sure you maintain at least a _______ safety cushion

Answers

The answer is 4 because I just took the test!

An important difference between expressways and freeways is that expressways feature intersections, whereas freeways use: a) interchanges b) medians c) rumble strips d) green guide signs

Answers

An important difference between expressways and freeways is that expressways feature intersections, whereas freeways use a) interchanges.

An isolation transformer whose main purpose is to reduce voltage spikes will have a turns ratio of?

Answers

Answer:

An isolation transformer whose main purpose is to reduce voltage spikes will have a turns ratio of 1 to 1.

This is due to the windings input and output having the same waveform and amplitude.

_____require(s) driving at speeds that are reasonable and prudent for conditions.

Answers

Basic speed law requires individuals driving at speeds that are reasonable and prudent for conditions.

What is Speed?

This is defined as the rate of change of the position of a body with respect to time and the unit is metre per second.

The basic speed law states that speeds which are reasonable and prudent should be adopted by drivers so as to avoid accidents and potential risks to other road users. Appropriate punishment are also meted out to defaulters in this type of scenario.

Read more about Speed laws here https://brainly.com/question/13211153

#SPJ1

Write a class having two private variables and one-member function which will return the area of the rectangle.

Answers

Using the knowledge in computational language in C++ it is possible to write the code being write a class having two private variables

Writting the code in C++:

#include <iostream>

using namespace std;

class Rectangle { /*create a class named Rectangle*/

  private:

  float l,b; /*this class has two private variables l and b*/

  public:

  float getArea(float l, float b) /*this class has one member-function getArea which returns the area of the rectangle*/

  {

   return l*b; /*return the area of the rectangle*/

  }

};

int main () { /*the main function to check the working of our Rectangle class*/

 float l,b;

 Rectangle r1; /*create an object r1 of Rectangle class*/

 cout<<"Enter the length of the rectangle: ";

 cin>>l; /*input the length of the rectangle from the user*/

 cout<<"Enter the breadth of the rectangle: ";

 cin>>b; /*input the breadth of the rectangle from the user*/

 cout <<"Area of the rectangle is: "<< r1.getArea(l,b)<<" square units."; /*find the area of the rectangle using the member function of the class*/

 return 0;

}

See more about C++ at brainly.com/question/19705654

#SPJ1

P=3000W
f1=0.9
f2=0.5
A=15mm2
travel speed=?

Answers

The Travel Speed at which the welding operation can be accomplished is given as 7.147mm/s. See the computation below.

What is travel speed?

The travel speed of the welding flame or gun across the workpiece is simply measured in millimeters per minute.

Travel speed, along with voltage and amperage, is one of three factors in arc welding that affect the amount of heat input.

What is the calculation that justifies the above answer is?

We are given the following:


Melting temperature = 1650 K

k = (3.33 * 10⁻⁶) * (1,650)²

k = 9.066 J/mm^3

The formula for velocity here is given as:

V = f1 * f2 * Rh / (k*A)

V = 0.9 * 0.6 * 3000 / (9.066*25)

V = 7.147 mm/s

Hence, the Travel Speed at which the welding operation can be accomplished is given as 7.147mm/s.

Learn more about welding operation at;
https://brainly.com/question/22494632
#SPJ1

Metal wireways are sheet metal troughs with _____________ for housing and protecting electrical conductors and cable.

Answers

Answer:

Metal wireways are sheet metal "U"s with removable housing for protecting electrical equipment, wires, and cables.

Explanation:

These are especially used to run wire in manufacturing environments.

Draw the schematics for the following two battery connections. Can you explain the value of the output voltage in the series connection

Answers

if two 1.5 ya alt batteries are connected to head to the tail the voltage is 3.0 volt it is the because the battery is insidious reduce a voltage equal to number of battery is multiplied by the voltage of individual

An inverter has a balanced 3-phase, 277/480 V output and is installed a distance, d, ft from the point of utility connection. The DC/AC converter shown below in the inverter. And the distance d is the physical separation between this DC/AC converter and the PCC. (

Answers

An expression for the voltage drop between inverter and PUC

[tex]V D \rightarrow \frac{I(\Omega / k f t) d}{2770}$[/tex]

This is further explained below.

What is an expression for the voltage drop between the inverter and PUC?

Generally, the equation for Voltage drop is  mathematically given as

[tex]V=\frac{I R}{V}[/tex]

Therefore

[tex]\%$ Voltage drop $=\frac{I R}{V} * 100\\\\$\rightarrow \frac{100 I(\Omega / 15 f t) d}{1000 V_{p}}\\\\$V_{P}=277 \mathrm{~V}$[/tex]

[tex]V D=\frac{I(\Omega / \mathrm{kft}) d}{10 * 2770} \rightarrow \frac{I(\Omega / \mathrm{kft}) d}{2770} \mathrm{~V}\\\\$\% V D \rightarrow \frac{I(\Omega / k f t) d}{2770}$[/tex]

In conclusion, the expression for the voltage drop between inverter and PUC

[tex]V D \rightarrow \frac{I(\Omega / k f t) d}{2770}$[/tex]

CQ

An inverter has a balanced 3-phase, 277/480 V output and is installed a distance, d, ft from the point of utility connection. The DC/AC converter is shown below in the inverter. And the distance d is the physical separation between this DC/AC converter and the PCC.

Derive an expression for the voltage drop between inverter and PUC in terms of d using the basic equation %VD =100IR/V.

Read more about voltage drop

https://brainly.com/question/13094809

#SPJ1

what is the basic concept of the finite element method.​

Answers

Answer:

The FEM is a general numerical method for solving partial differential equations in two or three space variables (i.e., some boundary value problems). To solve a problem, the FEM subdivides a large system into smaller, simpler parts that are called finite elements.

Other Questions
Which number is in the solution set of the inequality x < 15?A)12B)18C)21D)24 Please help........ thank you 1. Spray bottles used to store and dispense degreaser taken from bulk containersmust be labeled with theO common name of the substance.O manufacturer's trademark name.O scientific term known to food handlers.O safety data sheets supplied by the manufacturer. A scientist uses radioactive nitrogen to label the nitrogenous bases of the DNA of a cell. Then the DNA is allowed to replicate, and the new strands take up non-radioactive bases. Do one, both, or neither of the daughter cells have radioactive DNA? Explain. 1s2, 2s2, 2p6, 3s2, 3p6, 4s2After this atom gains or loses valence electron/s, what will the oxidation number be? The savanna is always _________________ and has two seasons: rainy and dry. A thin layer of _________________ matter creates enough nutrients in the soil to sustain plants. Savannas can be found in _________________, India and _________________. Hakara Company has been using direct labor costs as the basis for assigning overhead to its many products. Under this allocation system, product A has been assigned overhead of $10.80 per unit, while product B has been assigned $3.60 per unit. Management feels that an ABC system will provide a more accurate allocation of the overhead costs and has collected the following cost pool and cost driver information: Cost Pools Activity Costs Cost Drivers Driver Consumption Machine setup $360,000 Setup hours 4,000 Materials handling 100,000 Pounds of materials 20,000 Electric power 40,000 Kilowatt-hours 40,000 The following cost information pertains to the production of A and B, just two of Hakara's many products: A B Number of units produced 4,000 20,000 Direct materials cost $42,000 $54,000 Direct labor cost $24,000 $40,000 Number of setup hours 400 200 Pounds of materials used 1,000 3,000 Kilowatt-hours 2,000 4,000 Required: Use activity-based costing to determine a unit cost for each product. Geometry problem above ^ ABC is similar to... Write an equation for the nth term of the geometric sequence 0.6, 3, 15, -- 75, ...Then find a6. Round to the nearest tenth if necessary. 4. How will the information historians get from oldnewspapers be different from that found in policereports? Find the area of rectangle ABCDAnswers:A. 20B. 10 square root 2 + square root of 82C. 24D. 12 Page NoDate T 1 1Istament Write a program in java to find the area andperimeter of right angled triangle by using function argument. Match the sentences that form logical pairs. Mis primas no duermen bien. ____ Find the distance from A to C A group of college students believes that herbal tea has remarkable restorative powers. To test its theory, the group makes weekly visits to a local nursing home, visiting with residents, talking with them, and serving them herbal tea. After several months, many of the residents are more cheerful and healthy.1. The lurking variable in this experiment isa. visits of the college students.b. the fact that this is a local nursing home.c. herbal tea.d. the emotional state of the residents.2. The explanatory variable in this experiment isa. visits of the college students.b. herbal tea.c. the emotional state of the residents.d. the fact that this is a local nursing home.3. Which of the following may be correctly concluded from this study?a. The results of the study are not convincing because only a local nursing home was used and only for a few months.b. Herbal tea does improve one's emotional state, at least for the residents of nursing homes.c. There is some evidence that herbal tea may improve one's emotional state. The results would be completely convincing if a scientist had conducted the study rather than a group of college students.d. The results of the study are not convincing because the effect of herbal tea is confounded with several other factors. For what value of k is the expression x4+kx2+49 a perfect square?7144998 Prior to 1820, how did eligible citizens cast their votes in elections? by filing absentee ballots by calling out their votes by casting secret ballots by writing letters 2Highlight four ways in which commercial banks differ from non-bank Financial institutions.(4mks)Commercial bank from non bank financial institution An engineering student has just finished the freshman year and has received an offer of $20,000 per year in a full-time job. with prospects of salary increasing 3 % per year until retirement after 33 years. If employment is taken, the student will likely not finish his engineering degree. Tuition and other costs are $10,000 next year, increasing at 7% per year. A starting salary of $45.000 could be expected upon graduation from the fouryear program. Salary increases in the engineering job are estimated at 4% per year until retirement after 30 years. Required:On the basis of economics alone, should the student take the job now or finish college? Analyze as two mutually exclusive alternatives and solve with present worth analysis. Interest rate is 7%. HURRY PLEASEEEEE. Mexico Citys population is an example of __________________________. a. the growth of the divide between rich and poor c. the growth of immigration b. the shrinking middle class d. none of the above