The small piston of a hydraulic lift has a crosssectional area of 2.87 cm2 and the large piston 314 cm2 . What force must be applied to the small piston for the lift to raise a load of 2.4 kN

Answer:

a) v = 25.54 ft/s

b) Xmax = 0.4180

c) Xmax = 0.0048 ft

Explanation:

a) determine the speed v at which the amplitude of the boat and the trailer will be a maximum;

to calculate the distance travelled

S = vt

given an expression of wavelength

l = vt

l = 2πv / ω

ω = 2πv / l

equation for counter of the road

y = Y sin ωt

= Y sin ( (2πv / l)t)

next we calculate the angular frequency

ω = √ ( k/m)

=  √ ( g / Sst )

= √( 32.2 / ( 1.5/12))

= 16.05 rad/s

Now we calculate the speed v at which amplitude of the boat will be maximum

ω = 2πv / l

16.05 = (2 × π × v ) / 10

160.5 = 2πv

v = 160.5 / 2π

v = 25.54 ft/s

b)

we calculate the maximum amplitude using the following expression;

X/Y =  [ √( 1 + ( 2Sr)²)] / [ √(( 1  - r²)² +  ( 2Sr)²))]

Xmax / (0.5/12) = [ √( 1 + ( 2×0.05×1)²)] / [ √(( 1  - 1²)² +  ( 2×0.05×r)²))]

Xmax / 0.0416 = 1.004987 / 0.1

Xmax 0.1 = 0.0418

Xmax = 0.0418 / 0.1

Xmax = 0.4180

c)

we convert speed of the boat from mph velocity m/s

v = 55 mph × 1.46667ft/s  / 1mph

v = 80.66 ft/s

next we calculate angular velocity

ω = 2πv / l

= 2π × 80.66 / 10

= 50.68 rad/s

next is the frequency ratio

r = 50.68 / 16.05

= 3.16

finally we find the amplitude of the boat

X/Y =  [ √( 1 + ( 2Sr)²)] / [ √(( 1  - r²)² +  ( 2Sr)²))]

Xmax / (0.5/12) = [ √( 1 + ( 2×0.05×3.16)²)] / [ √(( 1  - 3.16²)² +  ( 2×0.05×3.16)²))]

Xmax / 0.0416  = √1.0998 / √ ( 80.74 + 0.0998)

Xmax / 0.0416 = 1.0487 / 8.9910

Xmax 8.9910 = 0.0436

Xmax = 0.0436 / 8.9910

Xmax = 0.0048 ft

Answer:

directly proportional to the square of its speed.

Explanation:

;)

Answer:

I say...D!~

Explanation:

I think you mean form*

Hope it helps~ (Sorry if you get it wrong-)

~The Confuzzeled homan

Answer:

a) Student 1 is right in the way he calculates the speed cid d of the truck, since going at constant speed

b) Student 2 is right that for the car to reach the truck it must have some relationship,  

c)   t = √d/a

Explanation:

In this exercise you are asked to analyze the movement in a mention using kinematics.

a) Student 1 is right in the way he calculates the speed cid d of the truck, since going at constant speed he can use the equation

         v = d / t

b) Student 2 is right that for the car to reach the truck it must have some relationship, which is given by

        v = v₀ + a t

        x = v₀ t + ½ a t²

c)    let's use the equations

      v = d / t

       v = v₀ + at

      d / t = vo + at

If we can assume that the car starts from rest, so v₀ = 0

       d / t = a t

        t² = d / a

        t = √d / a

if the speed of the car is not zero the result is a little more complicated

      d = vo t + a t²

      at² + vo t - d = 0

let's solve the quadratic equation

      t = [-v₀ ± √ (v₀² + 4a d)] / 2a

Answer:

F = 2700 N

Explanation:

Given that,

Mass of a car, m = 3000 kg

Initial velocity, u = 15 m/s

Final velocity, v = 60 m/s

Time, t = 5 s

We need to find the net force on the car during this time ​. The net force on an object is given by the product of mass and acceleration. So,

F = ma

a is acceleration, a = (v-u)/t

[tex]F=\dfrac{m(v-u)}{t}\\\\F=\dfrac{3000\times (60-15)}{5}\\\\F=27000\ N[/tex]

So, 27000 N is the net force on the car during this time .

Answer:

Use equation for kinetic energy: Ek=mV²/2

m=700 kg

V=10m/s

Ek=700kg*100m²7s²/2

Ek=35000 J=35kJ

Explanation:

Hope this helps you

Do mark me as brainliest

A triangle is the symbol used to indicate a fulcrum in a lever, a triangle has three sides and three vertices.

A fulcrum is a pivot that has a base and a point that serves as a balance for  a lever.

Basically a lever is a simple machine that is a beam with two sides pivoted to fulcrum.

A lever has Load, Effort and the last part is fulcrum

Learn more about fulcrum here:

https://brainly.com/question/14422546

Answer:

67.9 Ω

Explanation:

L = 60 mH = 60 x 10⁻³ H = 0.060 H

f = 180 Hz, ω = 2πf = 1131 rad/s

reactance = ωL = 1131 x 0.060 = 67.9 Ω

Answer:

Option B: Group

Explanation:

The elements fluorine, chlorine, and iodine are commonly known as halogens.

They all have 7 valence electrons in their outermost shell and thus they all belong to group 7A in the periodic table.

Correct Answer is: Group

Answer:

Explanation:

Group hope this helps

A example of a scientific way of thinking is making observations, forming questions, making hypotheses, doing an experiment, analyzing the data, and forming a conclusion.

Answer:m

R

​

ν

R

​

+m

L

​

ν

L

​

=0   ⇒    (0.500kg)ν

R

​

+(1.00kg)(−1.20m/s)=0

which yields ν

R

​

=2.40m/s . Thus , Δx=ν

R

​

t=(2.40m/s)(0.800s)=1.92m .

(b) Now we have m

R

​

ν

R

​

+m

L

​

(ν

R

​

−1.20m/s)=0 which yields

        ν

R

​

=

m

L

​

+m

R

​

(1.2m/s)m

L

​

​

=

1.00kg+0.500kg

(1.20m/s)(1.00kg)

​

=0.800m/s .

Consequently , Δx=ν

R

​

t=0.640m .

Explanation:

Latitudes are angles that range from zero degrees at the equator to 90 degrees North or South at the poles.

Temperature is inversely related to latitude. As latitude increases, the temperature falls, and vice versa.

Generally, around the world, it gets warmer towards the equator and cooler towards the poles.

The Kinetic energy of the bowling ball is 4000 J while the momentum of the ball is 200 kg m/s

Kinetic energy, KE is the energy exerted by a body in motion. This is represented mathematically as half the product of mass, m and velocity, v squared.

Kinetic energy

KE =  1 / 2 m v^2

m = 5 kg

v = 40 m/s

KE = 0.5 * 5 *40 ^2

KE = 4000 J

Momentum, M

M = mass * velocity

M = 5 * 40

M = 200 kg m/s

Read more on Kinetic energy here: https://brainly.com/question/25959744

Read more on momentum here:

https://brainly.com/question/904448

The perimeter the sphere is the extreme to which they can go. If ... But what happens if a positively charged object is touched to a neutral object? ... The metal sphere loses electrons.

Answer:

The disadvantages are listed below for the defined term.

Explanation:

Answer:

A

D

A

Is all the information here?

If so than I do not know

The first 3 are correct though

Explanation:

Answer:

q/m = 2177.4 C/kg

Explanation:

We are given;

Initial speed v_o = 5 × 10³ m/s = 5000 m/s

Now, time of travel in electric field is given by;

t_1 = D_1/v_o

Also, deflection down is given by;

d_1 = ½at²

Now,we know that in electric field;

F = ma = qE

Thus, a = qE/m

So;

d_1 = ½ × (qE/m) × (D_1/v_o)²

Velocity gained is;

V_y = (a × t_1) = (qE/m) × (D_1/v_o)

Now, time of flight out of field is given by;

t_2 = D_2/v_o

The deflection due to this is;

d_2 = V_y × t_2

Thus, d_2 = (qE/m) × (D_1/v_o) × (D_2/v_o)

d_2 = (qE/m) × (D_1•D_2/(v_o)²)

Total deflection down is;

d = d_1 + d_2

d = [½ × (qE/m) × (D_1/v_o)²] + [(qE/m) × (D_1•D_2/(v_o)²)]

d = (qE/m•v_o²)[½(D_1)² + D_1•D_2]

Making q/m the subject, we have;

q/m = (d•v_o²)/[E((D_1²/2) + (D_1•D_2))]

We have;

E = 800 N/C

d = 1.25 cm = 0.0125 m

D_1 = 26.0 cm = 0.26 m

D_2 = 56 cm = 0.56 m

Thus;

q/m = (0.0125 × 5000²)/[800((0.26²/2) + (0.26 × 0.56))]

q/m = 312500/143.52

q/m = 2177.4 C/kg

The ratio of the charge to mass of the object will be equal to:

[tex]\dfrac{q}{m}=2177.4\ \frac{C}{kg}[/tex]

what is electric field?

The electric field is defined as the whenever an atom carries a charge whether positive or negative the their influence of force is spread around the charge at a particular distance this effect of force is called as the electric field.

We are given;

Initial speed  [tex]V_o[/tex] = 5 × 10³ m/s = 5000 m/s

Now, time of travel in electric field is given by;

[tex]t_1=\dfrac{D_1}{v_o}[/tex]

Also, deflection down is given by;

[tex]d_1=\dfrac{1}{2}at^2[/tex]

Now,we know that in electric field;

F = ma = qE

Thus,  [tex]a=\dfrac{qE}{m}[/tex]

So;

[tex]d_1=\dfrac{1}{2}\times(\dfrac{qE}{m})(\dfrac{D_1}{v_o})^2[/tex]

Velocity gained is;

[tex]V_y=(a\timest_1)=(\dfrac{qE}{m})\times (\dfrac{D_1}{v_o})[/tex]

Now, time of flight out of field is given by;

[tex]t_2=\dfrac{D_2}{v_o}[/tex]

The deflection due to this is;

[tex]d_2=V_y\times t_2[/tex]

Thus, [tex]d_2=(\dfrac{qE}{m}\times (\dfrac{D_1}{v_o})\times(\dfrac{D_2}{v_o})[/tex]

[tex]d_2=(\dfrac{qE}{m})\times (\dfrac{D_1\times D_2}{(v_o)^2}[/tex]

Total deflection down is;

[tex]d=d_1+d_2[/tex]

[tex]d=[\dfrac{1}{2}\times(\dfrac {qE}{m}) \times (\dfrac{D_1}{v_o^2})]+[(\dfrac{qE}{m})\times (\dfrac{D_1\times D_2}{v_o^2}})][/tex]

Making q/m the subject, we have;

[tex]\dfrac{q}{m}=\dfrac{(d\times v_o^2)}{[E(\dfrac{D_1^2}{2})+(D_1\times D_2))]}[/tex]

We have;

E = 800 N/C

d = 1.25 cm = 0.0125 m

D_1 = 26.0 cm = 0.26 m

D_2 = 56 cm = 0.56 m

Thus;

[tex]\dfrac{q}{m}=\dfrac{(0.0125\times 5000^2)}{[800((\dfrac{0.26^2}{2})+(0.26\times 0.56))]}[/tex]

[tex]\dfrac{q}{m}= 2177.4[/tex]

Hence the ratio of the charge to mass of the object will be equal to:

[tex]\dfrac{q}{m}=2177.4\ \frac{C}{kg}[/tex]

To know more about electric field follow

https://brainly.com/question/14372859

Speed of the rocket under uniform circular motion is 4.97 × [tex]10^7[/tex] m/s.

A fictitious force that moves in a circle and is directed away from the center of the circle is called centrifugal force. When measurements are taken in an inertial frame of reference, the force does not exist. It only becomes relevant when we switch from a ground/inertial reference frame to a rotating reference frame.

As the rocket is in uniform circular motion, the gravitational force due to earth and centrifugal force must be equal in magnitude.

The magnitude of gravitational force due to earth, [tex]F_G = \frac{G M m}{R^2}[/tex]

And, the magnitude of centrifugal force, [tex]F_C = \frac{mv^2}{R}[/tex]

Where,

G = universal gravitational constant =   6.67 * 10-11 N (m/kg)².

M = the mass of the earth = 5.97 x [tex]10^{24[/tex] Kg.

m =  the mass of the rocket = 0.5 x [tex]10^6[/tex]kg.

R = the orbit of the rocket = [tex]{8*10^6}[/tex]m.

For uniform circular motion,

[tex]\frac{G M m}{R^2}[/tex] = [tex]\frac{mv^2}{R}[/tex]

⇒ v² = [tex]\frac{GM}{R}[/tex]

⇒v² =[tex]\frac{6.67 * 10^{-11 } *5.97 x 10^{24 } }{8*10^6}[/tex]

⇒ v = 4.97 × [tex]10^7[/tex] m/s.

Hence, the speed of the rocket is 4.97 × [tex]10^7[/tex] m/s.

Learn more about centrifugal force here:

https://brainly.com/question/17167298

#SPJ2

Answer:

The amount of potential energy is increasing when they jump on the board. The amount of potential energy is decreasing and the amount of kinetic energy is increasing when they are falling towards the water. The point of maximum kinetic energy is right before they splash into the water. The point of maximum potential energy is when they jump the highest into the air.

Explanation:

The points of maximum potential energy when they jump highest into the air, their potential energy is at its highest.

Potential energy develops in systems where the configuration, or relative position of the pieces, determines the amount of the forces they exert on one another. Potential energy directly proportional to height of object higher the object higher the potential energy with respect to same reference point.

When they jump onto the board, potential energy is building. When they are descending toward the sea, their potential energy is dwindling and their kinetic energy is rising. Just before they splash into the water is when they have the most kinetic energy. When they jump highest into the air, their potential energy is at its highest.

Potential energy is highest at its highest point of jump.

To learn more about potential energy refer to the link:

brainly.com/question/24284560

 #SPJ5

Answer:

a)  The electric field at point P has no component in the x and z directions.

b) dEy = kλdxy₀ / (√( x² + y₀²))^3/2

c)Ey = = 2kλd / y₀( d² + 4y₀²))^1/2

d) Ey = 411.84 N/C

Explanation:

a)

from the uploaded image;

the electric field will only be in y-direction.

Therefore the electric field at P have no component in the  x and z directions.

b)

dEy = dEsin θ

dE = kdq / r²

from figure

sinθ = y₀ / √( x² + y₀²)

r = √( x² + y₀²)

dq = λdx

dEy = kdq sinθ / r²

dEy = kλdxy₀ / (√( x² + y₀²))^3/2

c)

the net electric field at p is ,

Ey = ∫^d/2_-d/2  kλdxy₀ / (√( x² + y₀²))^3/2

= kλy₀ ∫^d/2_-d/2  dx / (√( x² + y₀²))^3/2

= 2kλd / y₀( d² + 4y₀²))^1/2

d)

let y₀ = 15 × 10⁻²m,  λ = 3.5 nC/m , d = 1.5m

Ey = 2kλd / y₀( d² + 4y₀²))^1/2

Ey = 2(9×10⁹ N.m²/C²)(3.5×10⁻⁹m)(1.5m) / 0.15×(1.5)² + 4(0.15)²))^1/2

Ey = 411.84 N/C

Answer:

Straight Line

Light travels in straight lines called rays. Light travels "at the speed of light." This speed is about 186,000 miles per second (670 million miles per hour), or about 300,000 kilometers per second.

Have an amazing day!!

Please rate and mark brainliest!!

Answer:

42.87

Explanation:

Google

OR

420/9.8 which equals 42.87.

Answer:

The order of maximum is   [tex]n = 5[/tex]

Explanation:

From the question we are told that

  The  diffraction grating is  k  =  300 lines per mm  =  300000 lines per m

   The wavelength is  [tex]\lambda  =  630 \  nm  =  630 *10^{-9} \  m[/tex]

   Generally the condition for constructive interference is mathematically represented as

      [tex]dsin \theta = n  * \lambda[/tex]

Here n is the order maximum

d is the distance the grating which is mathematically represented as

    [tex]d =  \frac{1}{k}[/tex]

=>   [tex]d =  \frac{1}{300000}[/tex]

=>    [tex]d =  3.3*10^{-6}\  m [/tex]

So

   [tex]n  = \frac{dsin \theta}{ \lambda}[/tex]

at maximum  [tex]sin\theta  =  1[/tex]

     [tex]n  = \frac{d}{\lambda}[/tex]

=>   [tex]n  = \frac{3.3*10^{-6}}{630 *10^{-9}}[/tex]

=>   [tex]n = 5[/tex]

Gravity works the same way in water that it works in air or a vacuum -- but you have to consider the force of gravity on the water as well as on the object you put into it

Answer:

zero

Explanation:

The work done is zero because the object has no displacement

Answer:

Sorry, don't understand the question

Explanation: