the pressure indicated by the question mark is the __________.

The "walking ghost phase" of radiation is a term that refers to a short period of time after exposure to a high dose of ionizing radiation, during which the individual may appear to be unaffected by the exposure.

The term originated during the Manhattan Project, when scientists observed that individuals who had received a high dose of radiation would often feel relatively normal for a short period of time before experiencing severe symptoms. During the walking ghost phase, the individual may experience few or no symptoms of radiation exposure, even though their body is sustaining significant damage from the radiation. This is because the initial effects of radiation exposure are often delayed, and the damage to the body's cells and tissues takes time to manifest as symptoms. After the walking ghost phase, the individual may begin to experience symptoms such as nausea, vomiting, diarrhea, fever, and weakness. The severity and duration of these symptoms depend on the dose of radiation and other factors such as the individual's age, health, and medical treatment. It is important to note that the walking ghost phase is a term used primarily in historical contexts, as modern radiation exposure scenarios generally do not involve such high doses of radiation that would produce this effect. Nonetheless, it serves as a reminder of the dangers of ionizing radiation and the importance of taking measures to minimize exposure.

For such more questions on Radiation

https://brainly.com/question/1408043

#SPJ4

The frictional force of air against a moving object causes object to slow down is true.

Frictional force is the force created when two surfaces come into contact as well as slide against each other. These forces are mostly influenced by the surface roughness and the amount of force required when they are combined. The amount of frictional force is affected by the angle and location of the item.

The forces of attraction, defined as adhesion, between both the points of contact areas of the surfaces, that are frequently minutely uneven, are the primary cause of friction between objects. The frictional force of air against a moving object causes object to slow down is true.

Therefore, the frictional force of air against a moving object causes object to slow down is true.

To learn more about frictional force, here:

https://brainly.com/question/19180015

#SPJ9

The long sleeves and pants for places with rocks and thick forest growth

are not considered proper safety equipment for an outdoor excursion.

When we are planning for a journey, we must bring the safety equipments with us especially if we are going to a mountain or watery areas.

Life jackets, jackets for cold etc. must be there during a boat travel, or travel through colder regions. Similarly seat belts for car travel and helmet for biking is necessary.

It is good to avoid long skirts or sleeves during biking to avoid any hanging  anywhere. Long sleeves are not considered as a safety equipment anywhere.

Find more on safety equipment:

https://brainly.com/question/14848384

#SPJ9

The options of your question include:

A. helmet for biking

B .long sleeves and pants for places with rocks and thick forest growth

C. bathing suit for water activities

D. a compass or GPS device

The acceleration is 1.4 m/s^2

Acceleration is the rate at which an object's velocity changes over time. In other words, it is the change in velocity per unit time.

We call this;

a = v - u/t

a = 28 - 0/20

a = 1.4 m/s^2

Acceleration can be positive, negative or zero. A positive acceleration means the velocity of an object is increasing, a negative acceleration means the velocity of an object is decreasing and zero acceleration means the velocity of an object is constant (not changing). The unit of acceleration is meters per second squared (m/s^2).

Learn more about acceleration:https://brainly.com/question/12550364

#SPJ1

"The energy source that contributes to the greatest emissions of gases in the environment during the energy production process is fossil fuels." The correct option is B.

Fossil fuels, such as coal, oil, and natural gas, release large amounts of carbon dioxide (CO₂) and other pollutants into the atmosphere when burned for energy production. CO₂ is the primary greenhouse gas responsible for climate change and global warming. In addition, the extraction and transportation of fossil fuels also results in emissions of methane and other pollutants.

While nuclear energy (c) produces minimal emissions during energy production, the mining and processing of nuclear fuel can result in emissions of greenhouse gases.

Solar energy (d) and biofuels (a) are considered to be cleaner sources of energy, as they produce much lower emissions of greenhouse gases and other pollutants during energy production. However, the manufacturing and transportation of solar panels and biofuel crops can result in emissions of greenhouse gases.

Therefore, the energy source that contributes to the greatest emissions of gases in the environment during the energy production process is fossil fuels.

The given question is incomplete. The complete question is 'a. bio fuels

b. fossil fuels

c. nuclear energy

d. solar energy'

To know more about energy:

https://brainly.com/question/79954

#SPJ4

Catastrophic events are large-scale disasters that disrupt the normal functioning of a community or region and cause extreme damage and loss of life. These events can be natural disasters such as earthquakes.

Disasters are events that cause significant damage, loss of life, and suffering to people and the environment. They come in many forms such as natural disasters like earthquakes, floods and hurricanes, or man-made disasters like oil spills and nuclear accidents. Disasters can have long-term effects on the environment, economy, and people’s lives, and can leave entire communities struggling to recover. Governments and organizations around the world work together to reduce the impacts of disasters and prepare for future events.

To learn more about disasters

https://brainly.com/question/27297706

#SPJ4

Catastrophic events are large-scale disasters that disrupt the normal functioning of a community or region and cause extreme damage and loss of life. These events can be natural disasters such as earthquakes.

Disasters are events that cause significant damage, loss of life, and suffering to people and the environment. They come in many forms such as natural disasters like earthquakes, floods and hurricanes, or man-made disasters like oil spills and nuclear accidents. Disasters can have long-term effects on the environment, economy, and people’s lives, and can leave entire communities struggling to recover. Governments and organizations around the world work together to reduce the impacts of disasters and prepare for future events.

To learn more about Catastrophic events

https://brainly.com/question/6840049

#SPJ4

The derivative of acceleration is also known as jolt or surge. Jolt is defined as the price of alternate acceleration with appreciation to time.

Mathematically, it can be expressed as the second derivative of position with respect to time, or the third derivative of distance with respect to time:

j(t) = a'(t) = d^2v(t)/dt^2 = d^3x(t)/dt^3

Acceleration is a fundamental concept in physics that describes how quickly an object changes its velocity. Velocity is a vector quantity that includes both speed and direction, while the acceleration is the rate of change of velocity with respect to time.

In other words, acceleration measures how much an object's speed or direction changes over time. If an object is moving in a straight line and its velocity is increasing, its acceleration is said to be positive. Conversely, if its velocity is decreasing, its acceleration is negative.

The standard unit of acceleration is meters per second squared (m/s^2). A positive acceleration of 1 m/s^2 means that an object is increasing its speed by 1 meter per second every second.

To learn more about Acceleration visit here:

brainly.com/question/29998386

#SPJ4

The percent of minerals recycled in the United States in the most recent year (2018) was 2.3%. This number appears to be staying about the same over the past few years, with a slight increase from 2.2% in 2017 to 2.3% in 2018.

Recycling is the process of taking used, unwanted or discarded materials and transforming them into new products. It helps to reduce waste and conserve natural resources. Recycling can include the reuse of materials such as glass, paper, plastic, steel, aluminum, and other metals. By recycling, we can reduce the amount of waste that goes into landfills and help protect our environment.

To know more about Recycle
https://brainly.com/question/376227
#SPJ1

Option b. Mechanical waves require a medium for propagation. The most fundamental difference between mechanical waves and electromagnetic waves is that mechanical waves require a medium to propagate, whereas electromagnetic waves do not.

Mechanical waves, such as sound waves and water waves, require a material medium, such as air or water, to travel through. In contrast, electromagnetic waves, such as light and radio waves, can travel through a vacuum. While mechanical waves do have properties like crests and troughs, well-defined wavelengths, and finite speeds, these are not the most fundamental differences between the two types of waves. The requirement for a medium is what fundamentally distinguishes mechanical waves from electromagnetic waves.

Learn more about Mechanical waves here: brainly.com/question/24459019

#SPJ4

Complete question:

Which one of the following properties most fundamentally distinguishes mechanical waves from electromagnetic waves?

a. Mechanical waves have crests and troughs.

b. Mechanical waves require a medium for propagation.

c. Mechanical waves have well-defined wavelengths.

d. Mechanical waves move at a finite speed.

Answer:

To find the work done on the car, we can use the formula:

work = force x distance x cos(theta)

where force is the applied force, distance is the displacement, and theta is the angle between the force and displacement vectors (assuming the force is applied in the same direction as the displacement, theta is 0 and cos(theta) is 1).

In this case, the force is 15 N, the distance is 5 m, and theta is 0, so we can plug in the values and get:

work = 15 N x 5 m x 1

work = 75 J

Therefore, the work done on the car is 75 joules

The speed of light in the solid is 1.88 × 10⁸m/s

What are the light's wavelength and frequency?

The distance between equivalent places in two consecutive light cycles is known as the wavelength of light, and the frequency of light is the number of light cycles that pass a specific spot in a second.

The ratio of the speed of light in a vacuum to that in a second medium with a higher density is used to compute the refractive index (also known as the index of refraction). If the solid's wavelength is 420/670, or 0.627 times that of air, then the solid's light speed is also 0.627 times that of air. Bonus: The reciprocal of speed is proportional to refractive index. Given that the refractive index of air is 1, the clear solid's refractive index is 670/420, or 1.60.

The refractive index of a material is,

[tex]n = \dfrac{\lambda_v}{\lambda_m}[/tex]

[tex]n = \dfrac{670 }{420 }[/tex]

n = 1.59

Now,

The speed of light in the solid is,

[tex]\mathrm{v = \dfrac{c}{n} }[/tex]

Here, c is speed of light = 3 × 10⁸ m/s

So,

[tex]\mathrm{v = \dfrac{3 \times 10^8}{1.59} }[/tex]

v = 1.88 × 10⁸ m/s

Thus, The speed of light in the solid is 1.88 × 10⁸m/s

To learn more about refractive index use link below:

https://brainly.com/question/14760207

#SPJ4

Complete question:

A light wave has a 670 nm wavelength in air. Its wavelength in a transparent solid is 420nm.

What is the speed of light in this solid?

Titanium is a non-magnetic metal because of its digital configuration and crystal shape.

In its pure shape, titanium has a hexagonal near-packed (hcp) crystal structure, this means that that its atoms are organized in a specific pattern in the crystal lattice.

This association outcomes inside the absence of unpaired electrons that could create magnetic moments, making it non-magnetic. Moreover, the electron configuration of titanium does not permit for magnetic moments to shape.

Titanium has four valence electrons, which are positioned within the 3-d and 4s orbitals.

The electrons in the 3d orbital are paired, which means that they've opposite spins and cancel out any magnetic second that could be created by means of the electrons inside the 4s orbital.

But, whilst titanium is alloyed with other metals, inclusive of iron or nickel, it may turn out to be magnetic because of the magnetic houses of these metals.

This belongings is utilized in various programs, inclusive of in the manufacturing of plane and medical implants, where the non-magnetic houses of titanium are important to keep away from interference with electromagnetic gadgets.

Learn more about titanium:

https://brainly.com/question/8028003

#SPJ4

Psychological perspectives exist to explain the science of behavior, it deals with studying the science of cognitive behavior, hence option D is correct.

The five major psychological perspectives are biological, psychodynamic, behavioral, cognitive, and humanistic.

It generally suggests the behavior of humans both consciously and unconsciously and deals with the humans way of thinking and their behavior so it is the science of behavior.

Therefore, psychological perspectives are to explain the science of behavior.

Learn more about Psychology, here:

https://brainly.com/question/28398714

#SPJ9

Answer:

the glass and paper have diffrent charges

Explanation:

if the glass is charged positively then the paper was charged negatively

the to charges were to attract think of it as a magnet

At a top speed of roughly 16.4 m/s, the automobile can navigate the bend without slipping.

The corner speed is the product of the stall speed times the square root of the limiting maximum G loading of the airplane in a certain configuration. Simple. You may find the fuel weight range based on the range of stall speeds using the equation, among other things.

The centripetal force determines the fastest speed at which an automobile can round a curve without sliding,

F_c = m × a_c

The centripetal acceleration is given by:

a_c = v² / r

where v is the velocity of the car and r is the radius of the curve.

F_friction = friction coefficient * F_norm

F_friction = F_c

friction coefficient × F_norm = m × v² / r

v² = r × friction coefficient × g

v = sqrt(r × friction coefficient × g)

v = sqrt(25 m  0.7 × 9.81 m/s²) ≈ 16.4 m/s.

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ1

The average angular acceleration of the ferris wheel is 0.32 rad/s2.

Acceleration is the rate it which an object increases its speed velocity or rate of change it is the rate of change of velocity of a time or the rate of change of the position of an object acceleration can be either positive when the speed of an objective increasing or negative in the speed of the object is decreasing.

The average angular acceleration of the ferris wheel can be calculated using the equation:

α = Δω / Δθ

where α is the angular acceleration, Δω is the change in angular speed, and Δθ is the change in angular displacement.

Therefore, the angular acceleration of the ferris wheel is:

α = (0.80 rad/s - 0)/(2.5 rad)

α = 0.32 rad/s2

Therefore, the average angular acceleration of the ferris wheel is 0.32 rad/s2.

To know more about acceleration click-
https://brainly.com/question/605631
#SPJ4

The type of electromagnetic wave that is primarily used in communication is radio waves, which have frequencies between about 3 kHz and 300 GHz.

Radio waves are used for various forms of communication, including radio and television broadcasting, cell phone and Wi-Fi communication, and satellite communication. They are preferred for communication because they can travel long distances through the atmosphere and can penetrate walls and other obstacles without significant attenuation. Infrared waves are also used in communication, primarily for short-range wireless communication such as in remote controls and some wireless headphones, but they have limited range compared to radio waves. Ultraviolet waves and gamma rays are not used for communication purposes as they have very high frequencies and can be harmful to living organisms.

To learn more about electromagnetic wave here:

https://brainly.com/question/3101711

#SPJ4

The fact that we always see the same face of the Moon tells us that (b) the Moon's rotation period is the same as its orbital period.

Every face appears to be identical to every other face. Face blindness, or prosopagnosia, is the medical term for this condition.

Because the period of rotation of the moon on its axis is equal to the period of its revolution around the earth, we always see the same side of the moon, and this side always faces us.

The speed at which it rotates is the same for both rotations. Because of this same speed, one always sees the same side of the moon.

learn more about Moon's rotation

https://brainly.com/question/29488851

#SPJ4

Colloid osmotic pressure is determined by protein concentration gradient across blood vessel walls.

Colloid osmotic strain (COP) is a sort of osmotic tension not set in stone by the centralization of proteins in an answer. These proteins, regularly egg whites and globulin, are too huge to even consider going through the walls of veins, and thus, they stay in the plasma (the fluid piece of blood) and make a fixation slope across the vein walls. This fixation slope prompts a net development of water into the veins, which assists with keeping up with blood volume and forestall liquid collection in the tissues.

The COP of an answer is relative to the convergence of proteins in the arrangement, with higher centralizations of protein bringing about higher COP. COP is significant in various physiological cycles, including the guideline of circulatory strain, the support of liquid equilibrium, and the anticipation of edema (expanding brought about by liquid gathering in the tissues).

To learn more about colloid osmotic pressure, refer:

https://brainly.com/question/30639201

#SPJ4

The box product of the three vectors yields the volume of a parallelepiped with the vectors and and as its sides. Volume is equal to [a, b, c].

There are six square-shaped parallelepiped faces on the cube. Dice, ice cubes, Rubik's cubes, etc. are some examples. A face diagonal joins two vertices on the same face but not on the same edge. In this instance, the Face diagonal coincides with the Square diagonal.

An object with parallelograms for faces is called a parallelepiped. Similar to a parallelepiped, a hexahedron with six parallelogram faces is a parallelepiped as well. A few examples of parallelepipeds are the cube, cuboid, and any rectangular prism.

To know more about Parallelepiped visit:

https://brainly.com/question/29140066

#SPJ4

The de Broglie wavelength of the bullet 5.93 x 10^-35 m. For a bullet, the de Broglie wavelength is extremely small, and its wave-like behavior is not easily noticeable or significant. The behavior of a bullet is mostly described by its classical, particle-like properties.

The de Broglie wavelength of an object can be calculated using the formula:

λ = h / (mv)

where h is Planck's constant (6.63 x 10^-34 J s), m is the mass of the object (in kilograms), and v is the velocity of the object.

In this case, the mass of the bullet is 28 g = 0.028 kg, and its velocity is 765 m/s, so the de Broglie wavelength can be calculated as:

λ = (6.63 x 10^-34 J s) / (0.028 kg * 765 m/s) = 5.93 x 10^-35 m is the de Broglie wavelength of the bullet.

You can learn more about de Broglie wavelength at

https://brainly.com/question/15330461

#SPJ4

The network executed on a particle equals the trade inside the particle's kinetic electricity: W internet = k B − k A.

Kinetic electricity is a form of energy that an object possesses by using distinctive features of its motion. It is defined as the energy that an object possesses due to its motion, and it is dependent on both the object's mass and velocity. The formula for kinetic energy is KE = 1/2mv^2, where m is the mass of the object and v is its velocity.

When an object is in motion, it has kinetic energy that can be transferred to other objects or converted into other forms of energy, such as potential energy or heat. For example, a moving car has kinetic energy that can be converted into potential energy as it climbs a hill, or into heat energy as its brakes are applied.

To learn more about Kinetic Energy visit here:

brainly.com/question/26472013

#SPJ4

The correct answer is a. An astronaut who falls into a black hole would be stretched because the gravity near a black hole is incredibly strong. This is due to the enormous mass of the black hole, which creates a gravitational force so powerful that it warps the fabric of space and time.

As the astronaut approaches the event horizon, the difference in gravitational force between their head and feet becomes so great that it stretches their body apart, a process known as "spaghettification." This occurs because gravity is much stronger at the black hole's event horizon than it is further away from the black hole.

The gravitational force changes dramatically over a short distance, causing the astronaut's body to stretch like spaghetti. While time does indeed slow down near the event horizon of a black hole, it is not the reason why the astronaut would be stretched.

To learn more about gravitational force, visit here

https://brainly.com/question/12528243

#SPJ4

When venous blood enters the left atrium during ventricular Diastole and the left atrial pressure exceeds the left ventricular pressure, the mitral valve opens and passive filling of the ventricle occurs. That's true.

Diastole begins with the closure of the aortic (or pulmonary) valve and ends with the closure of the mitral (or tricuspid) valve. This period includes relaxation and filling of the ventricles. Diastole is when the blood vessels return blood to the heart in preparation for the next ventricular contraction. The cardiac cycle begins with relaxation of the atria and ventricles. During diastole, blood flowing from the central veins fills the atria, partially fills the ventricles, and flows through the venous sinuses, the sinoatrial (SA) duct, and the atrioventricular (AV) duct. 

Learn more about Diastole

brainly.com/question/902007

#SPJ4

True. The ventricles of the heart are the two lower chambers responsible for pumping blood to the body and lungs.

During ventricular diastole, the ventricles relax and begin to fill with blood. Most of the filling happens passively while the atrioventricular valves (the mitral valve on the left side and the tricuspid valve on the right side) remain open, allowing blood to flow from the atria into the ventricles. This phase of the cardiac cycle is important for the efficient filling of the ventricles, which helps to ensure an adequate volume of blood is available to be pumped out during the subsequent contraction (systole).

Learn more about ventricle here: brainly.com/question/29564818

#SPJ4

"The correct statements from the following list regarding light are: Light can act both as a wave and a particle. High frequency photons carry more energy than long wavelength photons. All electromagnetic waves travel at the speed of light. A photon is a particle of light." Correct options are A, B, C, D.

Light shows both a particle and a wave characteristic depending on the position, according to the quantum mechanical wave-particle duality hypothesis. Diffraction, polarisation, and interference can be explained if the light is seen as a wave.

A photon's energy rises as its frequency does. In other words, as the wavelength increases, a photon loses energy. Any energy unit can be used to express photon energy.

We say that light travels in waves, and all electromagnetic radiation travels at the same speed which is about 3 × 10⁸ meters per second through a vacuum.

To know more about light:

https://brainly.com/question/30651536

#SPJ4

According to the question: the average angular acceleration is 0.70/2.5 is 0.28 rad/s^2.

Angular acceleration is the rate of change of angular velocity over time. It is the angular equivalent of linear acceleration, which is the rate of change of linear velocity over time. Angular acceleration is a vector quantity, having both magnitude and direction. It is usually denoted by the symbol alpha (α).

The average angular acceleration is equal to the change in angular velocity divided by the change in angular displacement. In this case, the change in angular velocity is 0.70 rad/s and the change in angular displacement is 2.5 rad.
Therefore, the average angular acceleration is 0.70/2.5 = 0.28 rad/s^2.

To learn more about angular acceleration
https://brainly.com/question/21278452
#SPJ4

A 25-foot ladder is set against the side of a house so that it reaches up to 15 feet. If Damian grabs the ladder at its base and pulls it 3 feet farther from the house, the distance from the side of the house to which the ladder reaches now is 9.8m.

The total length of the ladder is 25m. The distance the ladder is set up against the side of the house is 15m.

According to the image, apply Pythagoras' theorem, we get,

(25)² = (15)²+(a)²

a²=(25)²-(15)²

a²=625-225 =400

a=[tex]\sqrt{400}[/tex]

a= 20m.

Now, if Damian grabs the ladder at its base and pulls it 3 feet farther from the house, so the total base is (20+3) = 23m.

Applying Pythagoras' theorem again, we get

(25)² = (23)²+(a)²

a²=(25)²-(23)²

a²=625-529 =96

a=[tex]\sqrt{96}[/tex]

a= 9.8m.

The length to which the ladder reaches now is 9.8m.

For further learning about Pythagoras' theorem, refer to the link: https://brainly.com/question/21926466

#SPJ4

Astronomers take advantage of chromatic aberration in the prism. Therefore, the correct answer is option (a) the prism.

A prism is a triangular piece of glass or plastic that can split white light into its constituent colors by refracting the light at different angles as it passes through the prism. This effect is due to the different refractive indices of the prism material for different wavelengths of light, which causes the colors to separate.

Chromatic aberration is actually a type of distortion that can occur in lenses and mirrors, where different wavelengths of light are focused at different distances from the lens or mirror, resulting in color fringing around objects. However, astronomers typically try to minimize chromatic aberration in the lenses and mirrors of telescopes in order to achieve sharper and more accurate images.

Learn more about wavelengths of light here brainly.com/question/27557868

#SPJ4

Molality (m) is a measure of the concentration of a solute in a solution, and is defined as the number of moles of solute per kilogram of solvent.

The equation for molality is:

m = moles of solute / mass of solvent in kg

Concentration is the ability to focus one's attention and mental effort on a specific task or activity. It involves filtering out distractions and staying attentive to the task at hand. The level of concentration can vary depending on the person, the task, and the environment.

Concentration is an important aspect of productivity and can help individuals achieve their goals more efficiently. A lack of concentration can lead to procrastination, errors, and reduced performance. There are many techniques that can help improve concentration, such as creating a quiet and organized workspace, breaking tasks into smaller manageable parts, taking breaks, and avoiding multitasking. Additionally, engaging in activities that promote mindfulness, such as meditation and yoga, can also improve concentration.

To learn more about Concentration visit here:

brainly.com/question/30259556

#SPJ4

Fireworks effects are made by combining various chemical compounds and powders in specific configurations to produce a wide range of colors, shapes, and patterns.

The specific ingredients and configurations used can vary depending on the desired effect, but some common techniques and ingredients used in making fireworks include:

   Color production: Different metal salts are used to produce specific colors when they burn. For example, strontium produces red, copper produces blue, and barium produces green.

   Sparkling effects: Aluminum or magnesium powder can be added to create sparkling or glittering effects.

   Whistling or popping effects: Salts such as potassium benzoate or potassium oxalate can be used to create whistling or popping sounds.

   Smoke effects: Chemicals such as titanium dioxide or zinc oxide can be used to produce smoke or haze effects.

   Shaped charges: Fireworks can be shaped in various configurations to produce specific shapes or patterns, such as stars, flowers, or hearts.

To create a specific effect, the different chemicals and powders are carefully combined and packed into the firework's shell. The shell is then ignited, which ignites the chemicals inside and produces the desired effect.

Fireworks displays often involve a combination of different effects and colors, which are choreographed to music or other audio cues. The result is a dazzling and dynamic visual spectacle that is enjoyed by millions of people around the world for various celebrations and events.

For such more questions on Chemical Compounds

https://brainly.com/question/1194814

#SPJ4