the picture pls answer my picture.

The solution to the given equation 2sin2x = 1 − cos x on the interval [0, 2π) as required is; Choice D; x equals 0 comma 2 times pi over 3 comma 4 times pi over 3.

It follows from the task content that the solutions to the given equation be determined.

On this note, since the give equation is;

2sin²x = 1 − cos x on the interval [0, 2π).

Recall sin²x = 1 − cos²x; therefore we have that;

2 - 2cos²x = 1 - cos x

2cos²x - cos x - 1 = 0.

let y = cos x so that we have;

2y² - y - 1 = 0

x = 1 or x = -1/2.

Therefore; cos x = 1 or cos x = -1/2.

Ultimately, the values of x in the given interval are; 0, 2π/3, 4π/3.

Read more on trigonometric identities;

https://brainly.com/question/1687218

#SPJ1

Answer: 6(x+2)(x-5)

Step-by-step explanation:

1: Factor by grouping- A 6 can be distributed in all 3 terms, when we do this we get 6(x²-3x-10).

2: This is in the form 6(x²+bx+c). So, to continue factoring, just forget about the six for a while and find two factors of c that add up to b. These two factors are -5 and 2.

3: Fill in the blanks with either factor. (x+?)(x+?) We get (x+2)(x-5).

4: Bring back the 6 to the beginning of the equation to get a final answer of 6(x+2)(x-5).

Considering the tangent-secant theorem, the value of x is given as follows:

x = 55º.

The secant-tangent theorem states that when a tangent and a secant line intersect at a point outside a circle, the measure of the angle of intersection is given by half the difference between the arc length of the far arc by the arc length of the near arc.

Hence the equation is given as follows:

y = (far arc - near arc)/2.

The parameters for this problem are given as follows:

Then, applying the theorem, the value of x is given as follows:

x = (145 - 35)/2

x = 55º.

More can be learned about the secant-tangent theorem at brainly.com/question/9132922

#SPJ1

Answer:

£ 6904.13

Step-by-step explanation:

the final value is given by

[tex]8500 (0.90)[/tex] at the final of the first year
then you need to add (0.95) twice (one from second and one from third year)

Notice if the depreciation is 5% the final value is 0.95 of the initial value at the beginning of the year

finally:

[tex]8500 (0.90) (0.95)^2 = 6904.13[/tex] (rounded to nearest cent!)

the volume of the solid is [tex]V = π r2 (sqrt(3/4)r) / 3 = π r3 sqrt(3/4) / 3.[/tex]

Plugging in the given values, we get[tex]V = π (3)3 sqrt(3/4) / 3 = 27π/4.[/tex]

The volume of a solid with a circular base and cross sections taken parallel to one of the diameters that are equilateral triangles can be found using the slicing method. The formula for the volume of such a solid is:[tex]V = π r2 h/3,[/tex]where π is the constant pi, r is the radius of the circular base, and h is the height of the solid.

In this case, the radius of the circular base is 3 and the height is equal to the length of the sides of the

equilateral triangles. To find the height, we can use the Pythagorean Theorem. The hypotenuse of the triangle is 2r, so the length of the sides is sqrt(r2 - (r/2)2), which simplifies to sqrt(3/4)r.

for such more questions on equilateral triangles

https://brainly.com/question/17264112

#SPJ11

Answer:

HOPE THIS HELPS

Step-by-step explanation:

Midsize robot lawnmowers cut up to half an acre or about 22,000 square feet. Large robot lawnmowers can cut up to 1 acre, or 43,560 square feet, or more

Answer: 26 acres

Step-by-step explanation:

26 acres


Divided 15.6/3 to get unit rate, then multiply by 5 to get answer.

The dimensions of the can of greatest volume that can be made with 150 square inches of tin are a radius of approximately 5.78 inches and a height of approximately 3.85 inches.

The dimensions of the soup can of greatest volume that can be made with 150 square inches of tin are given by the formula [tex]V = \pi r^2h[/tex], where V is the volume of the can, r is the radius of the base, and h is the height of the can. We can solve for the radius and height of the can using the given information.

Let the radius of the base be r and the height of the can be h. Then, the surface area of the can is given by the formula [tex]A = 2\pi rh + 2 \pi r^2[/tex]. We are given that the surface area of the can is 150 square inches, so we can write the equation [tex]2 \pi rh + 2 \pi r^2 = 150[/tex]. We need to find the dimensions of the can that maximize its volume, V. To do this, we can use the formula for the derivative of V with respect to r, which is [tex]dV/dr = 2 \pi rh + \pi r^2 dh/dr[/tex].

Setting this equal to zero and solving for h, we get [tex]h = -2r/3[/tex]. Substituting this into the equation for A, we get the equation [tex]2 \pi r(-2r/3) + 2 \pi r^2 = 150[/tex], which simplifies to [tex]-4 \pi r^2/3 + 2 \pi r^2 = 150[/tex]. Solving for r, we get [tex]r = 5.78[/tex] inches. Substituting this into the equation for h, we get [tex]h = -3.85[/tex] inches.

Since we cannot have a negative height, we must discard this value and take the positive value of h, which is approximately 3.85 inches. Therefore, the dimensions of the can of greatest volume that can be made with 150 square inches of tin are a radius of approximately 5.78 inches and a height of approximately 3.85 inches.

See more about volume at: https://brainly.com/question/27710307

#SPJ11

Answer:For the first 40 hours, Mr. Smith earned:

$23.20/hour × 40 hours = $928.00

For the additional 11.5 hours, he earned:

$23.20/hour × 1.5 = $34.80/hour

So, for these hours, he earned:

$34.80/hour × 11.5 hours = $400.20

Adding these amounts together, we get:

$928.00 + $400.20 = $1,328.20

Therefore, Mr. Smith earned $1,328.20 last week.

Step-by-step explanation:

2+1=3 is the solution to the differentiation equation.

A differential equation is an equation that explains a function's unknown derivative or derivatives. Take the equation, for example. The expression d y d x = x sin expresses the derivative of an unknown function.

Chain rule evaluation of the derivative on the left hand side yields the following results:

[tex]dxd​ {( dxdy​ ) 3 } =0. ⇒3( dxdy​ ) 2 dx 2 d 2 y​ =0[/tex]

Because the highest order derivative that appears in the equation is second order, the order of this differential equation is 2.

Its highest order derivative's power is the degree. Degree in this instance is 1.

To know more about differentiation visit:-

https://brainly.com/question/14620493

#SPJ1

1. The volume of water in the tank before the valve is opened is 9362 cubic meters. 2. It takes 151 hours for the tank to fully empty.

Modeling is the process of representing and analyzing real-world events using mathematical ideas and methods. It is a crucial component of mathematics because it enables systematic, quantitative prediction, problem-solving, and understanding of complicated processes.

We may learn about the behavior of systems, test hypotheses, and arrive at wise conclusions by using mathematical models. We may use models to enhance processes, forecast results, and discover key factors.

The equation of the volume is given as V = 62(151 - t).

At t= 0 we have the volume as:

V = 62(151 - 0) = 9362 cubic meters

To empty the tank we take V = 0:

0 = 62(151 - t)

151 - t = 0

t = 151

Hence, the volume of water in the tank before the valve is opened is 9362 cubic meters and it takes 151 hours for the tank to fully empty.

Learn more about volume here:

https://brainly.com/question/14996332

#SPJ1

619 would Katherine need to invest, to the nearest dollar, for the value of the account.

What is interest in simple words?

When you borrow money, you must pay interest, and when you lend money, you must charge interest. The most common way to represent interest is as a percentage of a loan's total amount every year. The interest rate for the loan is denoted by this proportion.

x. (1 + 3.8%/365)¹⁷ˣ³⁶⁵  = 1180

= x * ( 1 + 38/365000)¹⁷ˣ³⁶⁵  = 1180

= x * ( 1 + 19/182500)¹⁷ˣ³⁶⁵  = 1180

= common denominator and write the numerators above common denominator  x * ( 182500 + 19/182500)⁶²⁰⁵  = 1180

        = x * (182519/182500)⁶²⁰⁵  = 1180

  Divide both sides of the equation by the coefficient of variable

                                  x = 1180/(182519/182500)⁶²⁰⁵

                         x = 1180 * 182500⁶²⁰⁵/182519⁶²⁰⁵

                        x =  619

Learn more about Interest

brainly.com/question/30393144

#SPJ1

Answer: The science teacher bought 4 rainforest posters and 2 ocean posters.

Step-by-step explanation: Let x be the number of rainforest posters and y be the number of ocean posters that the science teacher bought.

We know that the teacher bought 6 posters in total, so we have:

x + y = 6 (equation 1)

We also know that the cost of the 6 posters was $30, so we have:

5.5x + 4y = 30 (equation 2)

To solve for x and y, we can use either substitution or elimination method. Let's use the elimination method by multiplying equation 1 by 4 and subtracting it from equation 2:

5.5x + 4y = 30

-4x - 4y = -24

Simplifying, we get:

1.5x = 6

x = 4

Substituting x = 4 into equation 1, we get:

4 + y = 6

y = 2

Therefore, the science teacher bought 4 rainforest posters and 2 ocean posters.

Therefore, the derivative of the function h(w) is h'(w) = [tex]7*arcsin(w) + w*cos(w)*7.[/tex]

The derivative of the function h(w) is h'(w) = [tex]7*arcsin(w) + w*cos(w)*7[/tex]. To find this, first simplify the original function using the identity arcsin(w) = sin-1(w), then use the chain rule. We get:
h'(w) = 7*sin-1(w) + w*cos(sin-1(w))*7

Since sin-1(w) is the inverse of sin(w), we can substitute w for sin(w). This gives us:

h'(w) = 7*sin-1(w) + w*cos(w)*7[tex]7*sin-1(w) + w*cos(w)*7[/tex]

for such more questions in differentiation

https://brainly.com/question/14673926

#SPJ11

If product of two numbers is 19,200 and HCF is 40, then the LCM is 480

Given that the product of two numbers is 19,200 and the highest common factor (HCF) is 40.

Let us assume the two numbers to be x and y.

Therefore, x × y = 19,200

Also, HCF of x and y is 40.

We can write x = 40a and y = 40b, where a and b are co-prime.

Then, x × y = 40a × 40b = 1600ab = 19,200

Therefore, ab = 12

Now, we need to find the LCM of x and y.

LCM(x, y) = (x × y)/HCF(x, y) --- (1)

Substituting the values of x, y and HCF in the above equation, we get,

LCM(x, y) = (40a × 40b)/40 = 40ab

= 40 × 12 (as ab = 12)

= 480

Learn more about LCM here

brainly.com/question/17437347

#SPJ4

The zero vector: The zero vector 0 = [0,0;0,0;0,0] is also a member of W. Thus, the third criterion is satisfied.

for such more questions on matrices

https://brainly.com/question/26980927

#SPJ11

(a) The hypothesis that the mean inside bearing diameter is 8. 25 cm is 6.78.

(b) The  p value is zero because if we observe a sample that is unlikely to fall below zero (if the statistician can detect it, we can get a p-value of exactly zero.

(c) At 95% two-sided confidence interval on the mean bearing diameter is 8.2527 or 8.2543.

Hypothesis:

Hypotheses (plural hypotheses) are proposed explanations for phenomena. For a hypothesis to be a scientific hypothesis, the scientific method requires that it can be tested. Scientists often base scientific hypotheses on past observations that cannot be satisfactorily explained by existing scientific theories. Although the words "hypothesis" and "theory" are often used interchangeably, a scientific hypothesis is not the same as a scientific theory. A working hypothesis is a tentatively accepted hypothesis that is proposed for further research in a process that begins with an educated guess or idea.

(a) The hypothesis that the mean inside bearing diameter is 8. 25 cm. By Using the two sided alternative:

H₀= 8.25

H₁ ≠ 8.25

Z = X - 8.25÷ sd/√π

  = x - 8.25÷ 0.002/3.14

  = 6.78 > 1.96 (CV)

(b) the P-value for this test is:

p( value) = 0

because if we observe a sample that is unlikely to fall below zero (if the statistician can detect it, we can get a p-value of exactly zero.

(c) X ± Zᵃ ÷ sd/√π

  = 8.2527 or 8.2543

At 95% two sided confidence interval on the mean bearing diameter is 8.2527 or 8.2543.

Learn more about Hypothesis:

https://brainly.com/question/30665946

#SPJ4

The index of the middle element is 4.

The list (0, 1, 1, 2, 3, 5, 8, 13, 17), the binary search algorithm calls Binary Search (list, 0, 8, 3). The index of the middle element is 4. The binary search algorithm works by dividing a list into halves and looking at the value in the middle of the list. This is compared with the target value, and based on the comparison, one-half of the list is discarded as the search is continued in the other half. This is continued until the target value is found or it is clear that it is not on the list. In the given case, the list is (0, 1, 1, 2, 3, 5, 8, 13, 17), and the algorithm calls Binary Search(list, 0, 8, 3).

Here, the first parameter of the Binary Search function is the list, the second parameter is the lower index of the part of the list being searched, the third parameter is the upper index, and the fourth parameter is the value being searched. In the given case, the lower index is 0, the upper index is 8, and the value being searched is 3. The index of the middle element in the list is calculated as (0 + 8) / 2 = 4.

Therefore, the index of the middle element is 4.

To learn more about "binary search": brainly.com/question/12946457

#SPJ11

Answer:

[tex]\large\boxed{\mathtt{C=100 \pi \ in.}}[/tex]

[tex]\large\boxed{\mathtt{C \approx314.16 \ in.}}[/tex]

Step-by-step explanation:

[tex]\textsf{We are asked for the circumference of this circle.}[/tex]

[tex]\textsf{Let's review what the Circumference of a circle actually is.}[/tex]

[tex]\large\underline{\textsf{What is the Circumference?}}[/tex]

[tex]\textsf{The Circumference is is the length 'on' the circle.}[/tex]

[tex]\textsf{Circumference is the Perimeter of the Circle; The sum of all the curved edges.}[/tex]

[tex]\large\underline{\textsf{How do we find the Circumference?}}[/tex]

[tex]\textsf{To find the Circumference, we should use a common, and simple formula.}[/tex]

[tex]\mathtt{Circumference=(Diameter) \pi}[/tex]

[tex]\textsf{Pi will be multiplied by the Diameter of the Circle.}[/tex]

[tex]\textsf{Because we are given the Diameter, we can start solving for x.}[/tex]

[tex]\large\underline{\textsf{Substitute;}}[/tex]

[tex]\mathtt{Circumference \ (C)=(100 \ in.) \pi}[/tex]

[tex]\large\boxed{\mathtt{C=100 \pi \ in.}}[/tex]

[tex]\large\boxed{\mathtt{C \approx314.16 \ in.}}[/tex]

The selling price of the 501 carat diamond rings is approximately $168,750.00, rounded to the nearest cent.

To find the selling price of the 501-carat diamond rings, we need to use the information given about the cost of the purchase and the markup percentage.

Let's assume the markup percentage is m. Then, the selling price S can be calculated as:

S = C * (1 + m/100)

where C is the cost of the purchase ($125,000 in this case).

If the markup percentage is not given, we can use another piece of information to calculate it. For example, if we know that the company wants to earn a profit of P dollars on the sale, we can set the equation:

S - C = P

and solve for the markup percentage:

m = (P/C) * 100

Assuming a markup percentage of 35%, we can calculate the selling price as:

S = 125,000 * (1 + 35/100)

S ≈ $168,750.00

Therefore, the selling price of the 501 carat diamond rings is approximately $168,750.00, rounded to the nearest cent.

Learn more about Selling Price:

https://brainly.com/question/1153322
#SPJ4

Answer:

See below.

Step-by-step explanation:

Here's a number line showing the points that represent the values of x that satisfy the equation x² = 16

       |---------------------------|---------------------------|

      -4                          0                           4

On this number line, I have marked the points -4, 4, which are the two solutions to the equation x² = 16. These values of x make the left-hand side of the equation equal to 16.

there are approximately 1506 bouncy balls in the box.

What is mass ?

Mass is a physical property of matter, which refers to the amount of substance present in an object. It is typically measured in units of grams or kilograms, and can be thought of as a measure of the object's inertia or resistance to acceleration. Mass is often used interchangeably with weight in everyday language, but they are technically different concepts. Weight is a measure of the force of gravity acting on an object, and varies depending on the object's location in the gravitational field.

According to the question:
First, we need to find the mass of the bouncy balls in the box by subtracting the mass of the box only from the mass of the box and bouncy balls.

Mass of bouncy balls in box = Mass of box and bouncy balls - Mass of box only

Mass of bouncy balls in box = 17,342 - 429

Mass of bouncy balls in box = 16,913 grams

Next, we need to find the mass of one bouncy ball by dividing the mass of 45 balls by 45.

Mass of one bouncy ball = Mass of 45 balls / 45

Mass of one bouncy ball = 505 / 45

Mass of one bouncy ball = 11.222 grams

Finally, we can estimate the number of bouncy balls in the box by dividing the mass of the bouncy balls in the box by the mass of one bouncy ball.

Number of bouncy balls in box = Mass of bouncy balls in box / Mass of one bouncy ball

Number of bouncy balls in box = 16,913 / 11.222

Number of bouncy balls in box ≈ 1506

Therefore, there are approximately 1506 bouncy balls in the box.


To know more about Mass visit:
https://brainly.com/question/28704035
#SPJ1

According to the information provided, the state is at point C, Michigan.

Based on the information provided, the state located at point C is Michigan.

Logical reasoning consists of aptitude questions that require logical analysis to arrive at a suitable solution. Most of the questions are conceptual, the rest are unconventional.

Logical thinking follows he is divided into two types.

Oral reasoning:

It is the ability to logically understand concepts expressed in words and solve problems. Oral reasoning tests your ability to extract information and meaning from sentences. Non-verbal thinking:

It is the ability to logically understand concepts represented by numbers, letters, and combinations of numbers and words and solve problems. Nonverbal reasoning tests your ability to reason and guide the logic and implications of information in a problem.

Much of the logic curriculum can be classified into his two types above. 

To know more about Logical reasoning visit:

https://brainly.com/question/14458200

#SPJ1

The logarithmic expression given as log(15) -log(3) when simplified is log(5).

Given that

log(15) -log(3)

The form is

log(c)

Using the logarithmic identity that states log(a) - log(b) = log(a/b), we can rewrite the given expression as:

log(15) - log(3) = log(15/3)

And simplifying the expression inside the logarithm, we get:

log(15) - log(3) = log(5)

So the given expression, log(15) - log(3), can be written in the form log(c) as log(5).

This means that the logarithm of 5 is equivalent to the difference between the logarithms of 15 and 3.

Read more about logarithmic expression at

https://brainly.com/question/28041634

#SPJ1

The vector space of polynomials of degree at most two that satisfies the constraint is given by the span

{1 + x + x², 1 - x + x²}.

To find a basis for the given vector space, we first determine the dimensions of the space.

The vector space of polynomials of degree at most two is of the form:

p(x) = a + bx + cx²

This vector space contains infinitely many vectors because it is a function space.

The constraint p(1) = 1 + 2a + b + c = 0 means that the dimension of the subspace is two rather than three.

Next, we will obtain a basis for the vector space of polynomials of degree at most two that satisfy the constraint:

span{1, x - 1, x(x - 1)} is a basis for the subspace of the vector space that satisfies the constraint.

To find the basis for the subspace, we can use the definition of a basis.

A basis is a set of vectors that spans the subspace, and that are linearly independent.

We must demonstrate that this basis spans the subspace and that it is linearly independent.

If p(x) = a + bx + cx² satisfies the constraint p(1) = 0, then we have

1 + 2a + b + c = 0, which means a = (-b - c + 1)/2.

Then p(x) = (-b - c + 1)/2 + bx + cx².

Now, we find a basis for the subspace that satisfies the constraint by selecting vectors and demonstrating that they are linearly independent.

span{1, x - 1, x(x - 1)} is a basis for the subspace because they are linearly independent and span the subspace.

Span{1, x - 1, x(x - 1)} spans the subspace because any polynomial in the subspace can be expressed as a linear combination of the elements of the basis.

1 = (1/2) (1 + x - x(x - 1) - x + x(x - 1)) = (1/2)(1 - x²)x - 1 = x - 1x(x - 1) = x² - x

Since the coefficients of 1, x - 1, and x² - x are unique, the three polynomials are linearly independent, so they form a basis.

To know more about the "linearly independent"https://brainly.com/question/17353659

#SPJ11

Therefore, there are 336 different groups of software packages that can be selected from the 8 different software packages offered during the Computer Daze special promotion.

There are 8 different software packages to choose from during the Computer Daze special promotion. Since the customer purchasing a computer and printer is given a choice of 3 free software packages, this means that there are 336 different groups of software packages that can be selected.

To calculate this, the total number of possibilities can be found by using the formula nPr,

where n is the total number of choices, and r is the number of items chosen. This can be written as 8P3. 8P3 is equal to[tex]8x7x6 = 336.[/tex]

for such more questions on possibilities

https://brainly.com/question/13604758

#SPJ11

Answer: The input force (effort) on the rope is 20 N.

Step-by-step explanation:

In a frictionless pulley system, the tension in the rope is constant throughout. Therefore, the force applied to the rope on one side of the pulley system is equal to the force exerted on the other side of the system.

In this problem, we know that the weight of the block is 20 N. This means that there is a force of 20 N acting downwards on one side of the pulley system.

Since the pulley system is frictionless, the tension in the rope is also 20 N. Therefore, the force applied to the rope on the other side of the pulley system (i.e., the input force or effort) must also be 20 N in order to balance the weight of the block.

So the input force (effort) on the rope is also 20 N.

The relationship between distance and travel time. It is not excessively strong or weak. In other words, the rate of change in journey time is moderate and constant with respect to distance.

positive negative moderate weak linear nonlinear relationship between distance and travel time can be described as follows:•

           Positive• Linear• Moderate

   Explain as we move from point A to point B, the distance covered and the travel time it takes to get there are positively correlated. As the distance increases, the travel time required to reach the destination also increases, resulting in a positive correlation.

          The relationship between distance and travel time is linear because the rate at which distance is covered remains constant, resulting in a straight-line relationship on a graph. It means that if distance doubles, the travel time will also double, indicating a linear relationship.

Hence, the linear relationship is also referred to as a direct relationship. On a graph, the line that represents the relationship between distance and travel time is moderate. This implies that the slope of the line is neither too steep nor too gentle.

               Thus, it is neither too strong nor too weak. In other words, the rate of change in travel time is consistent as distance changes, making it moderate.

To learn more about the relationship between distance and travel time: https://brainly.com/question/17146782

#SPJ11

Answer:

The volume of a solid hemisphere with radius r is given by the formula:

V = (2/3)πr^3

In this case, the radius of the hemisphere is 2 cm. Substituting this value into the formula, we get:

V = (2/3)π(2 cm)^3

V = (2/3)π(8 cm^3)

V = (16/3)π cm^3

Therefore, the volume of the solid hemisphere is (16/3)π cubic centimeters.

Answer:

(16/3)π cm³ ≈ 16.76 cm³ (nearest hundredth)

Step-by-step explanation:

The volume of a solid hemisphere is given by the formula:

[tex]\boxed{V = \dfrac{2}{3}\pi r^3}[/tex]

where r is the radius of the hemisphere.

Substitute the given radius, r = 2 cm, into the formula, and solve for V:

[tex]\begin{aligned}\implies V &= \dfrac{2}{3}\pi(2)^3\\\\&= \dfrac{2}{3}\pi \cdot 8\\\\&= \dfrac{16}{3}\pi\; \sf cm^3\end{aligned}[/tex]

Therefore, the volume of the solid hemisphere of radius 2 cm is (16/3)π cm³ or approximately 16.76 cm³ (nearest hundredth).

The inequalities which the number lines represent are as follows;

x > 3

x <= 2.

A mathematical comparison and expression of the relationship between two expressions is known as an inequality.

It can be seen as a generalization of an equation and is denoted by a symbol like ">", "", "", or "".

In contrast to an equation, which only has one solution, an inequality may have several answers or none at all.

The values that give rise to an inequity are its remedies.

The range of potential values for a variable is one example of how inequality models limits or limitations in the real world.

They can also be used to describe how two variables relate to one another, such as when one is more than or less than the other.

According to our question-

the inequality is; x <= 2

the inequality is; x > 3

x > 3

x <= 2

learn more about inequalities click here:

https://brainly.com/question/30238989

#SPJ1