the phosphates that make up the phosphodiester bonds in dna have pka 2. when the ph of solution is dropped to 2.5, what is the charge of c. elegans dna, which is 97,000-kilo-base-pairs (kbp) long?

Answers

Answer 1

At pH 2.5, the phosphates in DNA are fully protonated and positively charged due to the low pH. The pKa of the phosphates is 2, so at pH 2.5, most of the phosphates will be protonated. As a result, DNA at this pH will have a positive charge.

The length of the DNA molecule is given as 97,000 kilobase pairs (kbp), which is a measure of the number of nucleotide pairs in the DNA. To calculate the charge of the DNA.

We need to know the number of phosphates in the molecule, which is equal to twice the number of nucleotide pairs. Therefore, the number of phosphates in the DNA is 194,000.

Since each phosphate group carries a charge of -1 at neutral pH, the total charge on the DNA at pH 2.5 can be calculated by subtracting the number of protons from the total number of phosphates.

At pH 2.5, the number of protons is equal to 10^(2.5-2) times the number of phosphates, or 194,000 * 0.1 = 19,400. Thus, the net charge on the DNA at pH 2.5 is 194,000 - 19,400 = 174,600 elementary charges, or 1.746 x 10⁵ C.

To know more about DNA, refer here:

https://brainly.com/question/21992450#

#SPJ11


Related Questions

What is the molality of a solution prepared by dissolving 2.00 ml of bromine (d = 3.105 g/ml) in 125 ml of acetic acid, hc2h3o2 (d = 1.05 g/ml) (ans. 0.30 m)?

Answers

The molality of a solution is 0.304g

Calculation,

Given data,

Volume of bromine = 2 mldensity of bromine = 3.105 g/ml Volume of acetic acid = 125 mldensity of of acetic acid = 1.05 g/ml

Density of bromine = 3.105 g/ml  = mass / volume = mass / 2 ml

Mass of bromine = 3.105 g/ml ×  2 ml = 6.206 g

Density of acetic acid = 1.05 g/ml = mass / volume = mass / 125 ml

Mass of bromine = 1.05 g/ml ×  125 ml = 127.5 g

Molality = mass of solute in gram/molar mass of solute × 1000/mass of solvent in gram

Molality = 6.206 g/159.88 g/mol × 1000/127.5 g = 0.304 g

learn about Molality

https://brainly.com/question/20366625

#SPJ4

The value of the equilibrium constant K is a measure of how far the reaction proceeds toward the products at a given temperature. A small value of K indicates that the reaction favors the _____, whereas a large value of K indicates that the _____ will be present in a higher proportion.

Answers

The value of the equilibrium constant K is a measure of how far the reaction proceeds toward the products at a given temperature. A small value of K indicates that the reaction favors the reactants, whereas a large value of K indicates that the products will be present in a higher proportion.

What is Equilibrium Constant ?

The equilibrium constant of a chemical reaction usually denoted by the symbol K that express the relationship between the amount of reactants and products when a chemical reaction reaches equilibrium.

It is expressed as:

[tex]K_{c} = \frac{[C]^{c} \times [D]^{d} \times ...}{[A]^{a} \times [B]^{b} \times ...}[/tex]

where,

K = Equilibrium constant

A, B = Products

C, D = Reactants

[A] = equilibrium concentration of A in moles

a = number of moles of A

Thus from the above conclusion we can say that The value of the equilibrium constant K is a measure of how far the reaction proceeds toward the products at a given temperature. A small value of K indicates that the reaction favors the reactants, whereas a large value of K indicates that the products will be present in a higher proportion.

Learn more about the Equilibrium Constant here: https://brainly.com/question/12858312

#SPJ4

The enthalpy of vaporization of Bromine is 15.4 kJ/mol. What is the energy change when 80.2 g of Br2 condenses to a liquid at 59.5°C?

Answers

The enthalpy of vaporization of Bromine is 15.4 kJ/mol. -7.7 kJ is the energy change when 80.2 g of Br₂ condenses to a liquid at 59.5°C.

What is Enthalpy of Vaporization ?

The amount of enthalpy or energy that must be added to a liquid substance into gas substance is called Enthalpy of Vaporization. It is also known as Latent heat of vaporization.

How to find the energy change from enthalpy of vaporization ?

To calculate the energy use this expression:

[tex]Q = n \Delta H_{\text{vapo.}[/tex]

where,

Q = Energy change

n = number of moles

[tex]\Delta H_{\text{Vapo.}}[/tex] = Molar enthalpy of vaporization

Now find the number of moles

Number of moles (n) = [tex]\frac{\text{Given Mass}}{\text{Molar mass}}[/tex]

                                   = [tex]\frac{80.2\ g }{159.8\ g/mol}[/tex]

                                   = 0.5 mol

Now put the values in above formula we get

[tex]Q = - n \Delta H_{\text{vapo.}[/tex]         [Negative sign is used because Br₂ condensed here]

   = - (0.5 mol × 15.4 kJ/mol)

   = - 7.7 kJ

Thus from the above conclusion we can say that The enthalpy of vaporization of Bromine is 15.4 kJ/mol. -7.7 kJ is the energy change when 80.2 g of Br₂ condenses to a liquid at 59.5°C.

Learn more about the Enthalpy of Vaporization here: https://brainly.com/question/13776849

#SPJ1

Vapor pressure of a liquid increases with increasing temperature because increasing the temperature _______________.

Answers

Vapor pressure of a liquid increases with increasing temperature because increasing the temperature results in increasing kinetic energy and increase in molecular transition and motion.

What is Vapor Pressure?

The pressure exerted by a vapor in thermodynamic equilibrium with its condensed phases (solid or liquid) at a specific temperature in a closed system is referred to as vapor pressure.A liquid's evaporation rate can be determined by looking at the equilibrium vapor pressure. It has to do with how often particles tend to float away from liquids (or a solid).Volatile is a term used to describe a chemical that has a high vapor pressure at room temperature. Vapor pressure is the force that vapor exerts when it is present above a liquid surface.A liquid's molecules have an increasing kinetic energy as its temperature rises. The more molecules that convert into a vapor as a result of an increase in molecular kinetic energy, the higher the vapor pressure will be.

Know more about vapor pressure https://brainly.com/question/14617982

#SPJ4

A 17.10 g compound is made up of 5.900 g n and 11.20 g C. What is the percent composition of carbon in this compound?

Answers

A 17.10 g compound is made up of 5.900 g n and 11.20 g C.  the percent composition of carbon in this compound is 65.5%

The ratio of the amounts of each element to the sum of the individual element amounts present in the compound, multiplied by 100, is the definition of the percent composition of a given compound. In this instance, the quantity is expressed in grams of the constituent ingredients.

You may calculate the mole: mole ratio of the components present in a compound by knowing the % composition of the compound. You can determine the ion ratio in a chemical once you have this information. Mass percent composition is also referred to as mass percent. It is denoted by the symbol w/w percent. Mass percent composition for a solution is equal to the mass of an element in one mole of the compound divided by the compound's molar mass, multiplied by 100%.


To learn more about percent composition please visit -
https://brainly.com/question/17505281
#SPJ1

A student dissolves a mass of ammonium nitrate in water and notices that the temperature of the mixture decreases by
2.7 °C. The student concludes that the process of dissolving ammonium nitrate is

Answers

The conclusion of the student would be that the dissolution of ammonium nitrate is endothermic.

What are endothermic reactions?

They are reactions in which heat is absorbed from the surrounding. The consequence is that the reaction mixture's temperature is always lower.

Thus, the energy of the products is always higher than the energy of the reactants in endothermic reactions.

For endothermic reactions, the enthalpy change is always positive.

More on endothermic reactions can be found here: https://brainly.com/question/23184814

#SPJ1

1. Determine the amount concentration of calcium ions and acetate ions in a 0.80 mol/L
solution of calcium acetate (work out formula first).

Answers

Since there is one mole of Ca^2+ in calcium acetate, its concentration is 0.80 mol/L.

What is concentration?

The term concentration has to do with the amount of substance in solution. The concentration can be measured in several units. Generally, concentration is expressed in molarity, molality, mass concentration units or percentage.

Now we are asked to find the amount concentration of calcium ions and acetate ions in a 0.80 mol/L solution of calcium acetate. The formula of calcium acetate is Ca(CH3COO)2.

Thus;

Ca(CH3COO)2(aq)  ----> Ca^2+(aq) + 2CH3COO^-(aq)

It then follows that since there is one mole of Ca^2+ in calcium acetate, its concentration is 0.80 mol/L.

Learn more about concentration:https://brainly.com/question/10725862

#SPJ1

A glass column is filled with mercury and inverted in a pool of mercury. The mercury column stabilizes at a height of 729 mm above the pool of mercury. What is the pressure of the atmosphere

Answers

The atmospheric pressure will be:

The pressure of the atmosphere resulting from the mercury column is 0.959 atm

What is atmospheric pressure?

The force that an object experiences from the weight of the air above it per unit area are known as atmospheric pressure.

Given: Height of mercury column = 729 mm Hg

To find: The pressure of the atmosphere

Calculation:

The atmospheric column resulting from the mercury column is calculated as follows:

1 atm =760 mm Hg

So, we can convert the 729 mm Hg to atm, and we get

Atmospheric pressure = 729 x 1 atm / 760 = 0.959 atm

Learn more about atmospheric pressure here,

https://brainly.com/question/14315894

#SPJ4

Which properties does uranium-238 have?

Answers

The main properties of uranium-238 are as follows,

The uranium-238 have orthorhombic crystal structure.The physical state of  uranium-238 is solid.The  uranium-238  have acid base properties.The uranium-238 have hard and silver white metal.The natural abundance of  uranium-238 is 99%

The Atomic mass and atomic weight of  uranium-238

The atomic number of uranium-238 is 92The atomic weight of uranium-238 is 238.02

learn about uranium-238

https://brainly.com/question/9099776

#SPJ4

Write a balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.

Answers

V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l) is the balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.

What is Balanced Chemical Equation ?

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

The word based equation is

Vanadium(V) oxide + Hydrogen gas → Vanadium (III) oxide + Water

Now write the chemical equation

V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l)

Reactant side                Product side

V = 2                                V = 2

O = 5                                O = 5

H = 4                                 H = 4

We can see that the number of atoms on reactant side is equal to the number of atoms on product side. So the given equation is balanced.

Thus from the above conclusion we can say that V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l) is the balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.

Learn more about the Balanced chemical equation here: https://brainly.com/question/15355912

#SPJ4

One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. What will prevent you from coming into contact with this hazard

Answers

One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. Wear safety glasses, Avoid contact with water or moisture and Avoid dust formation will prevent you from coming into contact with this hazard.

What is Aluminum Chloride ?

Aluminum chloride is also called Aluminum trichloride. The formula of Aluminum chloride is AlCl₃. Aluminum chloride is a poor conductor of electricity in molten state. It is a powerful Lewis acid. It has very low melting point and boiling point.  

What will prevent you from coming into contact with this hazard ?

To prevent from this hazard follows these rules:

Wear safety glassesWear Impervious gloves Avoid contact with water or moisture. Avoid dust formation

Thus from the above conclusion we can say that One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. Wear safety glasses, Avoid contact with water or moisture and Avoid dust formation will prevent you from coming into contact with this hazard.

Learn more about the Aluminum Chloride here: https://brainly.com/question/6061451

#SPJ4

A solution with a pH = 13 has approximately how many moles of OH– ions per liter?

Answers

Answer:

1 × 10-¹ moldm-³

Explanation:

Pkw = PH + POH

14 = 13 + POH

POH = 1

so , [OH-] = 1 × 10-¹ moldm-³

The first word in the name of an ester is derived from the ________ used in the esterification.

Answers

The first word in the name of an ester is derived from the alcohol used in the esterification.

What is esterification?

Esterification is a chemical process where an organic acid with the formula is combined with an alcohol molecule having the chemical formula (ROH).

The process of esterification is known to produce an ester molecule and during this phenomenon is released water (H2O).

An example of an esterification reaction occurs when ethanoic acid (i.e., the active ingredient of vinegar) can react with C2H5OH (i.e., ethanol) in order to form the ethyl ethanoate molecule, which is a well-known ester molecule.

In conclusion, the first word in the name of an ester is derived from the Alcohol used in the esterification.

Learn more about esterification here:

https://brainly.com/question/14028062

#SPJ1

Which models of the atom from task 1 are not supported by rutherfords experimental evidence?

Answers

Model not supported is:

Thomson's atomic model of the atom from task 1 are not supported by Rutherford's experimental evidence.

Experiments given by Thomson, Rutherford & Dalton:

The cathode ray tube experiments of J.J. Thomson demonstrated that all atoms contain minute, electron-like subatomic particles that are negatively charged.The plum pudding model of the atom was put up by Thomson and featured negatively charged electrons embedded within a positively charged "soup."The majority of an atom is empty space, with a small, dense, positively-charged nucleus, as demonstrated by Rutherford's gold foil experiment.Rutherford postulated the nuclear model of the atom in light of these findings.Atoms, in Dalton's opinion, are the tiniest pieces of matter that can never be further divided. This belief persisted up until the time it was learned that the atom was made up of subatomic particles.

Dalton and Thomson's concepts are in conflict with the experimental findings of Rutherford. Dalton's model is unsupported by evidence because it does not include electrons, protons, or neutrons.

Learn more about atomic model here,

https://brainly.com/question/27990920

#SPJ4

how the molecule’s properties affect the physical properties of a molecule

Answers

The intermolecular forces, such as hydrogen bonds or van der Waals attractions, which draw one molecule to its neighbors, govern a substance's physical properties. Due to the relatively weak intermolecular forces of attraction, molecular substances typically take the form of gases, liquids, or low melting point solids.

How do the intermolecular forces affect physical properties?

The forces that bind two molecules together are known as intermolecular forces. Intermolecular forces have an impact on physical properties. Strong and weak forces both exist; the stronger the force, the more energy is needed to separate the molecules from one another. As intermolecular forces increase melting, boiling, and freezing points rise.

The following intermolecular forces are listed in order of strength:

Van der Waals dispersion forcesVan der Waals dipole-dipole interactionsHydrogen bondingIonic bonds

It would take very little energy to separate two molecules if they are connected by van der Waals dispersion forces. On the other hand, it requires a lot more energy to separate two molecules that are joined together by ionic bonds.

To know more about molecules refer to: https://brainly.com/question/1819972

#SPJ1

Hurricanes derive their energy from: Group of answer choices the latent heat of condensation. the latent heat of fusion. the latent heat of sublimation. the latent heat of vaporization.

Answers

Hurricanes derive their energy from the Latent heat of condensation.

Hence, Option (1) is correct answer.

What is Latent Heat ?

The heat that is released or absorbed during a phase change of a substance is known as Latent heat.

What is Hurricanes ?

Hurricanes is basically a type of storm called a tropical cyclone. These are intense low pressure areas. Hurricanes derive their energy from the latent heat of CONDENSATION.

Thus from the above conclusion we can say that Hurricanes derive their energy from the Latent heat of condensation.

Hence, Option (1) is correct answer.

Learn more about the Latent heat here: https://brainly.com/question/5401454

#SPJ4  

Based on the melting points of both substances in comparison with the table what's your guess

Answers

Based on the melting points of both substances in comparison, my guess is Sodium chloride and glucose are the mystery compounds.This is further explained below.

What is Sodium chloride?

Generally, Salt's chemical name is sodium chloride. It is an electrolyte's job to keep your body's fluid balance in check.

In conclusion, Sodium chloride and glucose are the likely candidates based on their relative melting points.

Read more about Sodium chloride

https://brainly.in/question/6246233

#SPJ1

what is saturated solution?12​

Answers

Answer:

A solution in which the maximum amount of solvent has been dissolved

Explanation:

For example, 36g of salt in 100g of water.

If you react 1.50 mL of cyclohexanol, which has a density of 0.9624 g/mL, with 1.24 mL of 85% phosphoric acid, which has a density of 1.6845 g/mL, what is the theoretical yield (in g) of cyclohexene

Answers

the theoretical yield of cyclohexene 1.24ml as phosphoric acid acts as limiting reagent.

What is Limiting Reagent?When a chemical reaction is complete, the limiting reagent—also known as the limiting reactant or limiting agent—is the reactant that has been completely consumed.Since the reaction cannot proceed without this reagent, the amount of product that can be produced is constrained.Excess reagents or excess reactants are any reagents that are present in amounts greater than those necessary to cause a reaction with the limiting reagent (sometimes abbreviated as "xs").The theoretical yield is the quantity of product obtained when the limiting reagent reacts completely, hence it is necessary to identify the limiting reagent in order to compute the percentage yield of a reaction.

To learn more about limiting reagent with the given link

https://brainly.com/question/11848702

#SPJ4

In a certain reaction, 27.3 g of iron reacts with 45.8 g of oxygen. What is the limiting reactant?

Answers

The limiting reactant for the reaction between 27.3 g of iron and 45.8 g of oxygen is iron

Balanced equation

We'll begin by writing the balanced equation for the reaction between iron and oxygen. This is given below:

4Fe + 3O₂ --> 2Fe₂O₃

Molar mass of Fe = 56 g/mol

Mass of Fe from the balanced equation = 4 × 56 = 224 g

Molar mass of O₂ = 16 × 2 = 32 g/mol

Mass of O₂ from the balanced equation = 3 × 32 = 96 g

SUMMARY

From the balanced equation above,

224 g of Fe reacted with 96 g of O₂

How to determine the limiting reactant

The limiting reactant can be obtain as illustrated below:

From the balanced equation above,

224 g of Fe reacted with 96 g of O₂

Therefore,

27.3 g of Fe will react with = (27.3 × 96) / 224 = 11.7 g of O₂

From the calculation above, we can see that only 11.7 g of O₂ out of 45.8 g given is required to react completely with 27.3 g of Fe.

Thus, Fe is the limiting reactant.

Learn more about stoichiometry:

https://brainly.com/question/11587316

#SPJ1

What, approximately, is the highest concentration of co2 measured in the earth's atmosphere in modern times?

Answers

In modern times the highest concentration of [tex]CO_{2}[/tex] measured in the earth's atmosphere is 400 ppm.

The concentration of the  [tex]CO_{2}[/tex] which is also refereed as global annual is increased by 50%.The rise in concentration of the  [tex]CO_{2}[/tex] start from 280 ppm during [tex]10^{4}[/tex] years up to the mid-18th century to 421 ppm as of May 2022.The reason behind the rise of concentration of the  [tex]CO_{2}[/tex]  is the Industrial Revolution.The concentration of the  [tex]CO_{2}[/tex] is rises in such pace the it is very dangerous for human health and environment.

Learn about  global annual

https://brainly.com/question/2921854

#SPJ4

According to the 2010 u.s. census, ______ percent of women had college degrees compared to approximately _____ percent of men.

Answers

According to the 2010 U.S. Census, 37 percent of women had college degrees compared to approximately 35 percent of men.

In 1970 and early 1980, women have surpassed men in number of bachelor's degree or master's degree in united state.

The women gets more degree to gain financial benefits. The gap in earning is greater in female graduate and non- graduate as compare to male graduate and non-graduate. To give education to girls saves lives and builds stronger families, communication and economic too.

learn about financial and benefits

https://brainly.com/question/19993778

#SPJ4

These two images have different chemical change words and definitions,
Can someone please help me match the word from its meaning?
Thank you!

Answers

Answer:

(1) Acid -------------------------------------> (G) When dissolved in water, its solution has a pH value less than 7. Acids are proton (H⁺ ion) donors.

(2) Alkali -----------------------------------> (E) The oxide, hydroxide, or carbonate of a metal that will react with an acid, forming a salt as one of the products (if a base dissolves in water it is called an alkali. Bases are proton (H⁺ ion) acceptors.

(3) Base ------------------------------------> (I) Its solution has a pH value of more than 7.

(4) Blast furnace ------------------------> (C) The huge reaction vessels used in industry to extract iron from its ore.

(5) Displacement reaction ----------> (R) A reaction in which a more reactive element takes the place of a less reactive element in one of its compounds or in solution.

(6) Mole -----------------------------------> (A) A very large number that is the amount of substance in the relative atomic or formula mass of a substance.

(7) Neutral -------------------------------> (J) A solution with a pH value of 7 which is neither acidic nor alkaline. Alternatively, something that carries no overall charge.

(8) Neutralization ----------------------> (F) The chemical reaction of an acid with a base in which a salt and water are formed. If the base is a carbonate of hydrogen carbonate, carbon dioxide is also produced in the reaction.

(9) Ore -------------------------------------> (P) Ore is rock which contains enough metal to make it economically worthwhile to extract the metal.

(10) Oxidation --------------------------> (B) A reaction where oxygen is added to a substance / or when electrons are lost from a substance.

(11) pH -------------------------------------> (O) A number which shows how strongly acidic or alkaline a solution is.

(12) Pipette ------------------------------> (N) A glass tube used to measure accurate volumes of liquids.

(13) Precipitate -------------------------> (K) An insoluble solid formed by a reaction taking place in solution.

(14) Reactant ---------------------------> (M) A substance we start with before a chemical reaction takes place.

(15) Reduction -------------------------> (S) A reaction in which oxygen is removed or electrons are gained.

(16) Salt ----------------------------------> (Q) A salt is a compound formed when some or all of the hydrogen in an acid is replaced by a metal.

(17) Strong acids ---------------------> (L) These acids completely ionize in solution and have a high concentration of H⁺ (aq) ions in solution.

(18) Universal indicator ------------> (H) A mixture of indicators that can change through a range of colors to show how strongly acidic or alkaline liquids and solutions are.

(19) Weak acids ---------------------->  (D) Acids that do not ionize completely in aqueous solutions.

In a voltaic (galvanic) cell, oxidation occurs at the _____ and is where _____ in the salt bridge moves toward.

Answers

In a voltaic (galvanic) cell, oxidation occurs at the anode and is where anions in the salt bridge moves toward.

What is Galvanic Cell ?

Galvanic Cell or Voltaic Cell is an electrochemical cell that converts the energy of spontaneous redox reactions into electrical energy. In galvanic cell oxidation occurs at the anode and reduction occurs at the cathode. The anode is positive and cathode is negative, anode attracts anions from solution in an electrolytic cell.

Thus from the above conclusion we can say that In a voltaic (galvanic) cell, oxidation occurs at the anode and is where anions in the salt bridge moves toward.

Learn more about the Galvanic Cell here: https://brainly.com/question/15096829

#SPJ1

A sample of 0.400 moles of nitrogen occupies 0.800 L. Under the same conditions, what number of moles occupies 1.200 L

Answers

Taking into account the Avogadro's Law, 0.600 moles occupies 1.200 L.

Avogadro's Law

Avogadro's Law is a gas law that relates the volume and amount of gas at constant pressure and temperature.

Avogadro's law states that volume is directly proportional to the amount of gas: increasing the amount of gas will increase the volume, while decreasing the amount of gas will decrease the volume.

Mathematically, this law states that the ratio between the volume and the amount of gas is constant:

[tex]\frac{V}{n} =k[/tex]

Assuming that there is a certain amount of gas n1 that occupies a volume V1 at the beginning of the experiment, by varying the amount of gas to a new value n2, then the volume will change to V2, and the following is true:

[tex]\frac{V1}{n1} =\frac{V2}{n2}[/tex]

Amount of moles in this case

In this case, you know:

V1=0.800 Ln1= 0.400 molesV2= 1.200 Ln2= ?

Replacing in Avogadro's Law:

[tex]\frac{0.800 L}{0.400 moles} =\frac{1.200 L}{n2}[/tex]

Solving:

[tex]n2x\frac{0.800 L}{0.400 moles} =1.200 L[/tex]

[tex]n2=\frac{1.200 L}{\frac{0.800 L}{0.400 moles} }[/tex]

n2= 0.600 moles

Finally, 0.600 moles occupies 1.200 L.

Learn more about Avogadro's Law:

brainly.com/question/4147359

#SPJ1

If 5. 0 grams of kcl is dissolved in 500 ml of water, what is the concentration of the resulting solution?

Answers

If 5.0 grams of KCl is dissolved in 500 ml of water, the concentration of the resulting solution will be 0.134M.

How to calculate concentration?

The concentration of a solution can be calculated by using the following formula;

Molarity = no of moles ÷ volume

According to this question, 5.0 grams of KCl is dissolved in 500 ml of water. The concentration is calculated as follows:

no of moles of KCl = 5g ÷ 74.5g/mol = 0.067mol

Molarity = 0.067mol ÷ 0.5L = 0.134M

Therefore, if 5.0 grams of KCl is dissolved in 500 ml of water, the concentration of the resulting solution will be 0.134M.

Learn more about concentration at: https://brainly.com/question/10725862

#SPJ1

Which equation agrees with the ideal gas law?
StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction.
V subscript 1 n subscript 1 equals V subscript 2 n subscript 2.
P subscript 1 n subscript 1 equals P subscript 2 n subscript 2.
StartFraction P subscript 1 over P subscript 2 EndFraction equals StartFraction T subscript 2 over T subscript 1.

Answers

The equation that agrees with the ideal gas law is as follows: StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction (option A).

What is ideal gas law?

Ideal gas law in physics is the equation of state of an ideal gas, which is a gas whose molecules do not interact or collide.

The equation of the ideal gas law is as follows:

PV = nRT

This equation shows that the volume is directly proportional to the volume of the gas.

Therefore, the equation that agrees with the ideal gas law is as follows: StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction.

Learn more about ideal gas law at: https://brainly.com/question/13821925

#SPJ1

option A, v1/t1 = v2/t2

What is surface tension? what is the relationship between intermolecular forces and surface tension? how does surface tension change with temperature?

Answers

Because of its molecule's cohesive nature, surface tension has the quality to resist an external force.

Surface tension is simply a property of the surface of a liquid that allows it to resist an external force.

If the intermolecular forces are stronger further results in higher surface tension. For example; water has a high surface tension resulting in strong dipole intermolecular forces. Another example is oil. Oil has a low surface tension resulting in lower dipole intermolecular forces.

Temperature is inversely proportional to Surface tension. Therefore, surface tension increases as the temperature decreases.

Learn more about the temperature: https://brainly.com/question/12293537

#SPJ4

Water is the ______ in aqueous solutions because it can dissolve polar molecules.

Answers

Answer:

solvent

Explanation:

Water dissolves the substances, which become the solutes in the solution.

What would be the molecular formula of rose oxide which contains C, H, and O and has two degrees of unsaturation and a molecular ion in its mass spectrum at m/z

Answers

The molecular formula of rose oxide:

The formula of rose oxide will be [tex]C_{10}H_{18}O[/tex].

What is the molecular formula?

An expression known as the molecular formula describes how many atoms of each element are present in a single compound's molecule. It shows the exact number of atoms in every molecule.

Use the rule of thirteen to obtain the molecular formula for a chemical whose molecular mass is known. Follow these procedures to obtain the molecular formula:

To get the fundamental formula, multiply the molar mass by 13. (sum of the masses of one carbon atom and one hydrogen atom)

Molecular mass/ 13 = n + r/13

where, n = numerator and r = remainder

Base formula is [tex]C_{n}H_{n+r}[/tex]

Calculation:

Remove the mass of the carbon and hydrogen compound that belongs to the same group as the additional atoms if the molecular formula contains atoms in addition to carbon and hydrogen.

Molecular mass /13 = 154/13

= 11 x 13 = 143      

Thus, 11 non-H atoms are 11C.

Thus, the formula is  [tex]C_{11}H_{11+11} = C_{11}H_{22}[/tex]

If oxygen, is present then the mass is 16 and remove [tex]CH_{4}[/tex].

[tex]C_{11}H_{22} - CH_{4} + O = C_{10}H_{18}O[/tex]

Thus, the formula of the compound will be [tex]C_{10}H_{18}O[/tex]

Learn more about molecular formula here,

https://brainly.com/question/14425592
#SPJ4

Other Questions
Which of the following is a means of detection and enforcement of cartel agreements?A.Firms agree to divide a market into exclusive territories.B.Firms include a most favored nation clause in their contracts.C.A store guarantees to meet or beat any competitor's price.D.All of the aboveE.None of the above Suppose that a top predator was added to the salt-marsh cordgrass (Spartina) ecosystem. Which of the following is likely to occur as a result? View Available Hint(s) a. The snail (Littoraria) would experience greater predation. b. Salt-marsh cordgrass (Spartina) would become the superior competitor among marsh plants.c. The trophic cascade will remain the same with similar interactions among marsh species. d. The fungus vuld have a greater colonization rate of Spartina. e. The new predator would cause the salt marsh ecosystem to collapse. Submit In each of Problems 11 through 15, the coefficient matrix contains a parameter a. In each of these problems: a. Determine the eigenvalues in terms of a. b. Find the bifurcation value or values of a where the qualitative nature of the phase portrait for the system changes. 11. x' (-1a)x 5 3 13. x' alon | a the equilibrium equation shows that sbcl3 reacts with water to form insoluble sbocl. why does the solution of antimony(iii) chloride have no visible precipitate in it? A pizza delivery man has to lift a very large pizza a height of 3.85cm higher than he is already holding it to meet the outstretched arms of the customer. if it takes 116 kj of work on the pizza to lift it this high, what force does he exert on the pizza 100 points what the summary of this story archaeologists have found that people lived on the north american continent many years ago--long before all the glaciers had melted from this land. many archaeologists think these people came to this land by crossing the bering strait between asia and alaska. only fifty-six miles lie between the two great landmasses. the greatest distance between the tiny islands that lie between the landmasses is only twenty-five miles, making a crossing at that point possible. although no one knows exactly how and when the earliest settlers came to north america, the reason why they came is known--they came to find food. as nomads, the early inhabitants of north america were accustomed to moving from place to place in search of food for their large herds of animals. during the winter these nomads would set up camps and wait for spring before moving on. in the spring and summer they would lead their herds to good grazing land. eventually, these people crossed over from asia onto the north american continent. they migrated as far as the east coast and as far south as the tip of south america. artifacts from this era show that the tools people used were intended for hunting animals, including the mammoth, the ground sloth, the tapir, the caribou, and the bison. the nomads depended upon these animals for both food and clothing.it has to have 35 words or more a collection of abstract classes defining an application in skeletal form is called a(n) . Brian invests 1300 into his bank account. He receives 10% per year simple interest. How much will Brian have after 3 years? pl q1. the light passing through the grating slits seems to be creating patterns of bright and dark fringes. in terms of light in the real world, what do the fringes mean? which compressor has a piston that is driven up and down in the cylinder by a connecting rod and crankshaft? in the human physiology lab, the dynamometer was used to measure __________. An object moves in a circle of radius R at constant speed with a period T. If you want to change only the period in order to cut the object's acceleration in half, the new period should be A) T/2. B) TN2. C) 1/4 D) 4T E) TV2. You believe that all illegal immigrants should be deported. You have no reason for believing this; you were simply taught to believe it by your parents. Is it morally right for you to adhere to such a view without good reason? Do you have a moral duty to apply critical reasoning to your belief? Why or why not? Given an updated current learning rate, set the ResNet modules to thiscurrent learning rate, and the classifiers/PPM module to 10x the currentlr.Hint: You can loop over the dictionaries in the optimizer.param_groupslist, and set a new "lr" entry for each one. They will be in the same orderyou added them above, so if the first N modules should have low learningrate, and the next M modules should have a higher learning rate, thisshould be easy modify in two loops. Consider this equation.cos(0) = 4/41If 0 is an angle in quadrant IV, what is the value of sin(0) Sketch the magnetic field dependent and temperature dependent magnetizationcharacteristics of a ferromagnet, antiferromagnet, paramagnet, and diamagnet,respectively mathematical procedures used to assume or understand predictions about the whole population based on the data collected from a random sample selected from the population are called: mckim, mean, and whites plan of pennsylvania station in new york city took inspiration from Please answer the following questions:A. -------- energy is the name of the energy corresponding to the highest filled electron state at 0K?B. Electrons in metals do not require any excitation before becoming conduction electrons that are free. True or false?C. For nonmetallic materials, which of the following is true?1. The wider the band gap, the higher the electrical conductivity at a given temperature.2. The wider the band gap, the lower the electrical conductivity at a given temperature.3. Can't say. 3 "Tells own news" Is an extract from the CAPS document, the learners in your classroom are expe to prepare a speech entitled "My Holiday News". Answer the following questions 3.1. What pre- speaking activities would you do? 3.2. What while - speaking activities would you do? 3.3. How would you integrate other skills into this lesson? 3.4. How would you assess the learners prepared speeches? TOTAL MARKS: 10 4