The correct answer for Acid dissociation constant of alloxanic acid is 1.09 × 10⁻.
The formula for alloxanic acid is HC4H3N2O5. Its pH, when it is in a 0.74 M solution, is 3.39.
We need to determine the acid dissociation constant of alloxanic acid. We can use the following formula for this purpose:
Ka = [H+][A-] / [HA] Where [H+] is the concentration of hydrogen ions, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.
We need to find out the concentration of hydrogen ions and the concentration of the acid. The pH of a solution is equal to the negative log of the hydrogen ion concentration.
We can use this formula to determine the concentration of hydrogen ions: pH = -log[H+] We can rearrange this equation to get [H+]: [H+] = 10-pH.
The concentration of hydrogen ions is: [H+] = 10-3.39 = 4.45 × 10⁻⁴M The concentration of the acid is 0.74 M. The concentration of the conjugate base can be determined by the following formula: [A-] = [H+] × (Ka / [HA]).
We can rearrange this equation to get Ka: Ka = ([H+] × [HA]) / [A-]
Substituting the values, we get: [A-] = [H+] × (Ka / [HA]) [A-] = (4.45 × 10-4) × (Ka / 0.74) [A-] = 3.01 × 10⁻⁶Ka
We can substitute this value of [A-] in the above formula for Ka:Ka = ([H+] × [HA]) / [A-]Ka = (4.45 × 10⁻⁴) × 0.74 / 3.01 × 10⁻⁶Ka = 1.09 × 10⁻⁵.
For more information about acid dissociation constant refer here
https://brainly.com/question/15012972?
#SPJ11
Whats the difference between zinc amino acid chelate with any other type of zincs?
Answer:
chelated zinc is more easily absorbed than zinc on it's own.
draw a lewis structure for ammonia, nh3 . include all hydrogen atoms and show all unshared pairs and the formal charges, if any. assume that bonding follows the octet rule.
The lewis structure for ammonia NH₃ is:
H
|
: N - H
|
H
And there are no formal charges.
Lewis structure for ammoniaTo draw the Lewis structure for NH₃, follow these steps:
1. Determine the total number of valence electrons: Nitrogen (N) has 5 valence electrons, and each Hydrogen (H) atom has 1 valence electron. Since there are 3 Hydrogen atoms, the total valence electrons are 5 + (3 * 1) = 8.
2. Identify the central atom: Nitrogen is the central atom because it has the highest bonding capacity (it can form 3 bonds).
3. Place the central atom and surround it with Hydrogen atoms: Write the symbol for Nitrogen and place the 3 Hydrogen atoms around it in a trigonal planar arrangement.
H
|
H - N - H
4. Connect the atoms with single bonds: Create a single bond between Nitrogen and each Hydrogen atom by placing a pair of electrons (a line) between them. This uses 6 valence electrons (2 for each bond).
5. Distribute the remaining valence electrons: We have used 6 valence electrons so far, and there are 2 more left. Place the remaining 2 electrons as a lone pair on the central Nitrogen atom.
H
|
: N - H
|
H
6. Check the octet rule: Each Hydrogen atom has 2 electrons (1 bond), and Nitrogen has 8 electrons (3 bonds and 1 lone pair). All atoms satisfy the octet rule.
7. Determine formal charges: In NH₃, there are no formal charges, as each atom has the same number of valence electrons as in its neutral state.
The Lewis structure for NH₃ is now complete.
learn more about Lewis's structure
https://brainly.com/question/20300458
#SPJ11
temperature decreasing is what causes the crystals to form on the wooden stick?
Geothermal energy is produced when water touches _______________.
A oil
B hot rocks
C biomass
Answer: Hot Rocks
Explanation:
2. Convert 3 moles of Ba(NO3)₂ to grams of Ba(NO3)2
Answer:
Explanation:
n = m / Mr
Atomic Mass :
Ba =137 ,327
N = 14,0067
O =15,9994
Mr[(Ba(NO3)2] = 137,327 + (14,0067+15,9994*3)*2 = 261,3368 g/mol
so for finding m[Ba(NO3)2] will take :
n = m / Mr
m = n * Mr
m =3 moles * 261,3368 g/moles
m = 784,01 grams
1.choose your dream car
Car year, make and model
2. Car year make model for second car
3. Miles per gallon on the highway for the first car
4.miles per gallon on the highway for second car
5. Balanced equation for the combustion of octane write the coefficients in order
In the picture look please
6. Assume you drive 15,000 miles in one year calculate the number of gallons of gas online your car uses in one year
7.convert gallons to mL( 1 gallon =3785.4mL)
8. Assume you drive the second car 15,000 miles in one year calculate the number of gallons of gas online your car uses In one year
9.convert gallons to mL for the second car (1 gallon = 3785.4mL)
Which are is more efficient in terms of gas use?
Dream car: 2022 Tesla Model S; Second car: 2022 Toyota Camry
If the price of gas is $3.00 per gallon, how much money would you spend on gas in one year for your dream car and the second car?To calculate the amount spent on gas in one year for each car, we need to multiply the number of gallons of gas used in one year by the price per gallon.
For the dream car: 426.9 gallons x $3.00/gallon = $1280.70 spent on gas in one year.
For the second car: 500 gallons x $3.00/gallon = $1500 spent on gas in one year.
Therefore, you would spend $1280.70 on gas for the dream car and $1500 on gas for the second car in one year.
The Tesla Model S is an electric car, so it does not have miles per gallon on the highway.
The Toyota Camry has a highway mpg of 39.
Balanced equation for the combustion of octane: 2C8H18 + 25O2 → 16CO2 + 18H2O
The first car (Tesla Model S) uses no gasoline, so it does not use any gallons of gas in one year.
Converting 1 gallon to mL: 1 gallon = 3785.4 mL
Assuming you drive the Toyota Camry 15,000 miles in one year and get 39 mpg on the highway: 15,000 miles ÷ 39 miles per gallon = 384.6 gallons
Converting gallons to mL: 384.6 gallons x 3785.4 mL/gallon = 1,455,047.64 mL
The second car (Toyota Camry) uses 384.6 gallons of gas in one year.
Converting gallons to mL for the second car: 384.6 gallons x 3785.4 mL/gallon = 1,455,047.64 mL
The Tesla Model S is more efficient in terms of gas use since it uses no gasoline.
Learn more about gallon here:
https://brainly.com/question/9917229
#SPJ1
assuming the density of a 5% acetic acid by mass solution is 1.0 g/ml, determine the volume of the acetic acid solution necessary to neutralize 25.0 ml of 0.10 m
To determine the volume of a 5% acetic acid by mass solution necessary to neutralize 25.0 ml of 0.10 m is 300 mL
To calculate the volume of the acetic acid solution necessary to neutralize, you will use the formula:
M₁V₁ = M₂V₂
Where,
M₁ = molarity of acetic acid
V₁ = volume of acetic acid
M₂ = molarity of sodium hydroxide
V₂ = volume of sodium hydroxideInitially
You need to calculate the moles of NaOH in 25 ml of 0.10 M NaOH;
Molarity (M) = 0.10 M
Moles (n) = M × Vn = 0.10 × 25/1000n = 0.0025 mol of NaOH
To neutralize NaOH, you need the same number of moles of acetic acid;
1 mol of NaOH reacts with 1 mol of acetic acid0.0025 mol NaOH reacts with 0.0025 mol acetic acid
Concentration of acetic acid = 5%
Mass of acetic acid in 100 ml of solution = 5 g
Density of solution = 1.0 g/ml
Therefore, volume of acetic acid solution that is necessary to neutralize 25.0 ml of 0.10 m
V = (0.0025 mol acetic acid) x (60.05 g acetic acid/1 mol acetic acid) x (1/5 g acetic acid in 100 ml of solution) x (1000 ml/1 L) x (1/1.0 g/ml)
V = 0.30 L of acetic acid solution
V = 300 mL of acetic acid solution (3 significant figures)
Hence, the volume of the acetic acid solution necessary to neutralize 25.0 ml of 0.10 m is 300 mL.
Learn more about neutralize at https://brainly.com/question/15255706
#SPJ11
silver nitrate can inhibit the amylase reaction by?
By severing disfluid connections, silver nitrate can prevent the amylase reaction from happening. Wheat flour's -amylase can be prevented from working by adding silver nitrate (AgNO₃).
As silver nitrate is a non-competitive inhibitor that disrupts the folding of the enzyme, it should be the most efficient in inhibiting amylase at 37°C if different inhibitors are tried with amylase to quantify the quantities of free-reducing sugars.
Accurate evaluation of the pasting qualities of wheat flour is hampered by endogenous -amylase. When rice flour with a medium to high amylose content is gelatinized, the capacity of silver nitrate (AgNO₃) solutions at seven various concentrations (0.001-0.1 m) to inhibit -amylase activity is compared with a deionized water (dH₂O) control (AC). Using a Quick Visco Analyzer, pasting characteristics are evaluated (RVA).
Learn more about Amylase here:
https://brainly.com/question/1705856
#SPJ4
Why are carboxylic acids more acidic than water or ethyl alcohol esters?
Carboxylic acids are more acidic than water or ethyl alcohol esters due to their stronger resonance stabilization. Carboxylic acids contain a carboxyl group (COOH) that is able to stabilize the extra electron density of the conjugate base (COO-) through resonance. The more electron-withdrawing atoms in the carboxyl group, the more stable the resonance structure and therefore the stronger the acid. Water and ethyl alcohol esters, on the other hand, have less electron-withdrawing atoms, so their conjugate base is not as stable and their acidity is less than that of carboxylic acids.
Additionally, carboxylic acids tend to have smaller molecules than water or ethyl alcohol esters. This means that their conjugate base will have a stronger interaction with the proton and therefore the acid is stronger. In contrast, water and ethyl alcohol esters are larger molecules and their conjugate base is less capable of stabilizing the proton and thus making the acid less acidic.
Know more about Carboxylic acids here:
https://brainly.com/question/4721247
#SPJ11
) Predict the product for the following reaction. Assume you have an excess of potassium tert-butoxide. (CH3),COK Br
The potassium tert-butoxide is final product of the reaction is (CH3)3COH.
Why potassium tert-butoxide is (CH3)3COH?
The product for the given reaction is (CH3)3COH.
Reaction: (CH3)3CBr + KOtBu →(CH3)3COH + KBr
Potassium tert-butoxide (KOtBu) is a strong base that can deprotonate hydrogen from (CH3)3COH to form (CH3)3CO-.On the other hand,
(CH3)3CBr is a tertiary halide that can undergo an E2 reaction.
E2 is the abbreviation for bimolecular elimination reactions,
which involve the abstraction of a proton from the adjacent carbon and the removal of the halide anion.
The hydrogen that is abstracted by KOtBu can only come from the carbon that is adjacent to the bromine in (CH3)3CBr, according to Saytzeff's rule, because this is the carbon with the least number of hydrogens.
As a result, an alkene intermediate will be formed.
The KBr salt will be the by-product.
The alkene intermediate, however, is not present in the end product because it is a reactive molecule and quickly reacts with any available hydrogen.
The hydrogen is provided by the KOtBu base.
As a result, the final product of the reaction is (CH3)3COH.
Learn more about potassium tert-butoxide
brainly.com/question/29484874
#SPJ11
Complete and balance the equation for the single displacement reaction between sodium and aluminum chloride. Phases are optional.
balanced equation: Na(s)+AlCl3(aq)⟶
The aluminum chloride and sodium chloride are dissolved in water as aqueous solutions
Why aluminum and sodium chloride react with each other?
The balanced equation for the single displacement reaction between sodium and aluminum chloride is as follows:
Na(s) + AlCl3(aq) → Al(s) + NaCl(aq)
This is a single displacement reaction because sodium is displacing aluminum from its compound aluminum chloride. The products of the reaction are aluminum and sodium chloride.
The equation balanced is because there are equal numbers of atoms each element on both sides of the equation. The coefficients in front of each molecule indicate the number of molecules of each compound or element that are involved in the reaction.
Na(s) + AlCl3(aq) → Al(s) + NaCl(aq) Phases are optional in the equation, but they can be included to indicate the physical state of each substance.
In this equation,
(s) indicates that sodium is a solid,
(aq) indicates that aluminum chloride and sodium chloride are dissolved in water as aqueous solutions,
and (s) indicates that aluminum is also a solid.
Learn more about sodium and aluminum chloride
brainly.com/question/30903681
#SPJ11
how would the electron configuration of nitrogen change to make a stable configuration? (1 point) responses it would lose four electrons. it would lose four electrons. it would gain two electrons. it would gain two electrons. it would gain three electrons. it would gain three electrons. it would lose five electrons. it would lose five electrons.
The electron configuration of nitrogen change to make a stable configuration c. it would gain three electrons
Electron configuration is the arrangement of electrons in an atom or molecule. This arrangement is based on the principles of quantum mechanics. It determines how atoms interact with each other, which in turn determines the properties of matter.
The electron configuration of nitrogen is 1s² 2s² 2p³. Nitrogen has five valence electrons, three of which are paired in the 2p orbital, while the other two are in the 2s orbital.Nitrogen has an unstable configuration because it needs three more electrons to complete its valence shell, which can be achieved by gaining three electrons. Therefore, the electron configuration of nitrogen would change to make a stable configuration by gaining three electrons.
Learn more about quantum mechanics at:
https://brainly.com/question/23780112
#SPJ11
Describe the parts of a lever. Include the following terms (fulcrum, resistance arm and effort arm).
Answer:
Explanation:
A lever is a simple machine that can be used to increase the force or distance of an applied effort. The three main parts of a lever are the fulcrum, resistance arm, and effort arm.
Fulcrum: The fulcrum is the pivot point or point of support on which the lever rests. It is the point around which the lever rotates or moves. The position of the fulcrum is important in determining the mechanical advantage of the lever.Resistance arm: The resistance arm is the part of the lever that extends from the fulcrum to the point where the resistance or load is applied. This is the part of the lever that must be moved in order to lift or move the load.Effort arm: The effort arm is the part of the lever that extends from the fulcrum to the point where the effort or force is applied. This is the part of the lever that the user pushes or pulls on in order to move the resistance arm and lift the load.The mechanical advantage of a lever depends on the ratio of the length of the effort arm to the length of the resistance arm. A longer effort arm will require less force to lift a load, but will require more distance to be moved. Conversely, a shorter effort arm will require more force to lift a load, but will require less distance to be moved.
At what Celsius temperature will argon have a density of 10.3 g/L and a pressure of 6.43 atm?
(31 deg. C)
At 31.52° Celsius temperature will argon have a density of 10.3 g/L and a pressure of 6.43 atm . This is given by ideal gas law.
What is ideal gas ?An ideal gas is a theoretical gas composed of many randomly moving point particles that do not interact with one another. The ideal gas concept is useful because it obeys the ideal gas law, which is a simplified equation of state, and is amenable to statistical mechanics analysis. The requirement of zero interaction is frequently relaxed if the interaction is perfectly elastic or regarded as point-like collisions, for example. When intermolecular forces and molecular size become important, the ideal gas model tends to fail at lower temperatures or higher pressures. It also fails for most heavy gases, including many refrigerants,[2] as well as gases with strong intermolecular forces, most notably water vapor. At high pressures, the volume of a real gas is frequently much larger than that of a pure gas.
using the formula
P × M = d × R × T
Where P = pressure = 6.43 atm
m= molar mass = 40 g
d = density = 10.3 g/L
T = temperature
R = 0.082057 L atm K⁻¹ mol⁻¹
solving for T ,
T = 31.52°C
To know more about ideal gas , visit ;
brainly.com/question/28257995
#SPJ1
which represents the result of mixing equal volumes of 1 m aluminum chloride, 2 m magnesium chloride, and 1 m potassium chloride solution? (each sphere represents 1 mol of ions.)
The result of mixing equal volumes of 1 M aluminum chloride, 2 M magnesium chloride, and 1 M potassium chloride solution is a colorless and odorless solution that contains six ions in equal amounts.
The AlCl3 dissociates into three ions, one Al3+, and three Cl-.The MgCl2 dissociates into three ions, one Mg2+ and two Cl-.The KCl dissociates into two ions, one K+, and one Cl-.As a result, when the aluminum chloride, magnesium chloride, and potassium chloride solutions are mixed in equal volumes, a total of six ions are present, consisting of one Al3+, one Mg2+, one K+, and three Cl- ions. The composition of the solution, which has six ions in equal amounts, is as follows:
Al3+ (aq) + Mg2+ (aq) + K+ (aq) + 3Cl- (aq) → colorless, odorless solution.
Learn more about solution at brainly.com/question/30665317
#SPJ11
hydrochloric acid series concentration conductivit y sodium hydroxide 1.0 m sodium hydroxide 0.10 m sodium hydroxide 0.01 m sodium hydroxide 0.001m sodium hydroxide 0.0001m sodium hydroxide 0.00001m measure the conductivity of the acetic acid series and answer the question based on the observed conductivity values. acetic acid series concentration conductivit y acetic acid 17.0 m acetic acid 15.0 m acetic acid 13.0 m acetic acid 11.0 m acetic acid 9.0 m acetic acid 7.0 m acetic acid 3.0 m acetic acid 1.0 m ions responsible for conductivity: transition from strong to weak conductor occurs at: ions responsible for conductivity: transition from strong to weak conductor occurs at:
The ions responsible for conductivity are H+ and OH-, respectively. A transition from a strong to a weak conductor occurs at 1.0M of acetic acid.
Let's start by discussing the conductivity of hydrochloric acid series concentration.
Hydrochloric acid, a strong acid, ionizes completely in water to generate hydrogen ions (H+) and chloride ions (Cl-). Hydrochloric acid is a strong conductor of electricity due to its high ion concentration.
Sodium hydroxide is a strong alkali that completely ionizes in water to form hydroxide ions (OH-). Sodium hydroxide is a strong conductor of electricity due to its high ion concentration.
Acetic acid is a weak acid, which means it does not ionize completely in water. Its ion concentration is reduced as its concentration is decreased, and as a result, it becomes a weaker conductor of electricity. This is because it has fewer ions as its concentration decreases.
Learn more about ions https://brainly.com/question/1310794
#SPJ11
Which of the following will increase the pH of an H2CO3/HCO+3 buffer solution? Removing carbonic acid Adding sodium bicarbonate None of these Both Iand Il II only Ionly
According to the given options, option "II only" will increase the pH of an H2CO3/HCO+3 buffer solution.
Buffer solution- A buffer solution is a solution that resists changes in pH when small amounts of an acid or a base are added to it.
H2CO3/HCO+3 buffer- A buffer that consists of a weak acid and its conjugate base is known as an acid-buffer or a weak acid-buffer. For example, carbonic acid (H2CO3) and bicarbonate (HCO3−) are combined in a buffer solution that has a weak acid (H2CO3) and its conjugate base (HCO3−). Carbonic acid (H2CO3) and bicarbonate (HCO3−) are combined in a buffer solution that has a weak acid (H2CO3) and its conjugate base (HCO3−).
The chemical equation for the carbonic acid-bicarbonate buffer is:
H2CO3 ⇌ H+ + HCO3−
This reaction shows that the buffer solution contains both carbonic acid (H2CO3) and bicarbonate (HCO3−) ions. H+ and HCO3− ions are formed when carbonic acid (H2CO3) dissociates in water (H2O).
Increasing the pH of a buffer solution- The pH of a buffer solution can be increased by adding a strong base, which would react with the buffer's weak acid to form its conjugate base. In this scenario, sodium bicarbonate (NaHCO3) is a strong base.
Therefore, option "II only" is the correct answer.
To learn more about "buffer solution", visit: https://brainly.com/question/8676275
#SPJ11
what is the degree of polymerization of this polymer if the number-average molecular weight is 500000 g/col?
The degree of polymerization of this polymer if the number-average molecular weight is 500000 g/col is 4000.
What is the degree of polymerization?The degree of polymerization (DP) is the number of repeat units in a polymer chain. DP is a useful concept that provides information about the size of the molecule and its physical characteristics. DP is defined as the molecular weight of the polymer divided by the molecular weight of the repeating unit, which is usually determined using an average value. It is denoted as “n”.
What is number-average molecular weight?The number-average molecular weight (Mn) is the average molecular weight of a polymer chain, calculated based on the number of polymer molecules in the sample. Mn is obtained by dividing the total weight of the sample by the total number of molecules in the sample, which is usually determined by light scattering or gel permeation chromatography (GPC). Mn provides information about the average size of a molecule in a sample. It is denoted as “Mn”.
Formula to calculate degree of polymerization
n = molecular weight of the polymer/molecular weight of the repeating unit
Given,
Number-average molecular weight (Mn) = 500000 g/colWeight of repeating unit (W) = ?Degree of polymerization (n) = ?Now we have to find the weight of repeating unit (W) which can be obtained by the formula,
W = Mn / nW = 500000 / nGiven that number-average molecular weight (Mn) = 500000 g/col
By substituting the values in the above formula, we get,W = 500000 / nAt n = 125W = 500000 / 125 = 4000Hence, the degree of polymerization of this polymer if the number-average molecular weight is 500000 g/col is 4000.
Learn more about molecular polymerization: https://brainly.com/question/30017579
#SPJ11
A gas mixture contains each of the following gases at the indicated partial pressures:
N2= 215 torr
O2= 102 torr
He= 117 torr
a) What is the total pressure of the mixture?
b) What mass of each gas is present in a 1.35 L sample of this mixture at 25.0 C ?
a) The total pressure of the mixture is 434 torr
b) The mass of each gas is, N₂ = 40.56 g, O₂ = 21.76 g, He = 3.20 g
a) The total pressure of the mixture is calculated by adding all the values of partial pressures of the N₂, O₂, and He
215 torrs of N₂ + 102 torr of O₂ + 117 torr of He
= 434 torr
Thus, the total pressure of the mixture is 434 torr
b) The mass of each gas in the 1.35 L sample of the mixture at 25.0 C can be calculated using the ideal gas law: PV = nRT.
The amount of each gas present is equal to the total moles of gas, n, in the sample.
n = (PV)/(RT)
where P is the partial pressure of the gas in the mixture,
V is the volume of the sample (1.35 L),
R is the ideal gas constant (0.08206 L atm mol⁻¹ K⁻¹), and
T is the temperature in Kelvin (298.15 K).
For N₂: n = (215 torr x 1.35 L)/(0.08206 L atm mol⁻¹ K⁻¹ x 298.15 K) = 1.45 moles
For O₂: n = (102 torr x 1.35 L)/(0.08206 L atm mol⁻¹ K⁻¹ x 298.15 K) = 0.68 moles
For He: n = (117 torr x 1.35 L)/(0.08206 L atm mol⁻¹ K⁻¹ x 298.15 K) = 0.80 moles
The mass of each gas is equal to the moles multiplied by the molar mass of the gas:
For N₂: 1.45 moles x 28.01 g/mol = 40.56 g
For O₂: 0.68 moles x 32.00 g/mol = 21.76 g
For He: 0.80 moles x 4.00 g/mol = 3.20 g
Thus, the mass of each gas is, N₂ = 40.56 g, O₂ = 21.76 g, He = 3.20 g.
Learn more about partial pressure here:
https://brainly.com/question/14119417
#SPJ11
the esterification of acetic acid and ethanol is given by the reaction below:C2H5OH(aq) + CH3COOH(aq) = CH3COOC2H5(aq) + H2OWhen 1.00 mol of ethanol was mixed with 2.00 mol of acid in a 1.00 L flask, 0.86 mol of ester was formed at room temperature. What is the value of the equilibrium constant, Kc?
The value of the equilibrium constant, Kc for the esterification of acetic acid and ethanol is 4.94 x 10⁻².
Esterification is a chemical reaction between a carboxylic acid and an alcohol which leads to the formation of ester as the reaction product. In the presence of a strong acid catalyst, acetic acid reacts with ethanol to form ethyl acetate, an ester, as well as water. The equation of the reaction is:-
C2H5OH(aq) + CH3COOH(aq) ⇌ CH3COOC2H5(aq) + H2O
In this equation, the forward reaction is the esterification of acetic acid and ethanol, while the backward reaction is the hydrolysis of ethyl acetate. The value of the equilibrium constant, Kc, is given by the following equation:-
Kc = [CH3COOC2H5] / [C2H5OH] [CH3COOH]
Substituting the given values into the equation for Kc gives:-
Kc = [0.86] / [1.00] [2.00] = 0.43 / 4 = 0.1085 = 4.94 x 10⁻²
Learn more about esterification:
https://brainly.com/question/28118164
#SPJ11
what is BEFORE and AFTER when you put the baking soda in vinegar?
When you mix baking soda and vinegar, a chemical reaction occurs that produces carbon dioxide gas, water, and a type of salt called sodium acetate.
What happens at the mixing of baking soda in vinegar?Before: Before mixing baking soda and vinegar, they are both in their separate states. Baking soda is a white powder, and vinegar is a clear liquid.
During: When you mix the baking soda and vinegar, the baking soda (sodium bicarbonate) reacts with the vinegar (acetic acid) to produce carbon dioxide gas (CO2), water (H2O), and sodium acetate (NaC2H3O2).
After: After the chemical reaction has taken place, you will see bubbles of carbon dioxide gas being released. The solution will also become cloudy as the sodium acetate precipitates out. The resulting mixture may feel warmer due to the exothermic nature of the reaction (meaning it releases heat).
Learn more about baking soda in vinegar:https://brainly.com/question/2427021
#SPJ1
write the overall equation and mechanism for the synthesis of isopentyl acetate. include structures. include all reagents and products but not solvents. g
The overall equation for the synthesis of isopentyl acetate is:
Acetic Anhydride + Isopentyl Alcohol → Isopentyl Acetate + Water
The mechanism for this reaction is as follows:
Step 1: Protonation of the alcohol by the acetic anhydride
Acetic Anhydride + Isopentyl Alcohol → Isopentyl Acetate + Water
Step 2: Deprotonation of the newly formed acetate by the water, producing isopentyl acetate
Acetic Anhydride + Isopentyl Alcohol + Water → Isopentyl Acetate + Acetic Acid
Therefore, the synthesis of isopentyl acetate involves the reaction between acetic anhydride and isopentyl alcohol, followed by the deprotonation of the acetate by water.
Isopentyl acetate is an ester formed from isopentyl alcohol and acetic acid, which is used as a solvent in the production of essential oils and perfumes. In this reaction, the reaction between isopentyl alcohol and acetic acid is catalyzed by sulfuric acid. The mechanism of the reaction can be explained in terms of the Fischer esterification mechanism. The Fischer esterification mechanism is a chemical reaction that occurs between an alcohol and a carboxylic acid to produce an ester. This mechanism involves the attack of the alcohol's oxygen atom on the carboxylic acid's carbonyl carbon atom. The carbonyl oxygen atom, which is double-bonded to the carbonyl carbon atom, is then deprotonated by the acid catalyst, creating an intermediate. The intermediate then undergoes a proton transfer reaction to produce the final product. The overall equation and mechanism for the synthesis of isopentyl acetate are as follows: CH₃COOH + CH₃CH₂CH(CH₃)OH ⇔CH₃COOCH₂CH(CH3)₂ + H₂OIn this reaction, sulfuric acid is used as a catalyst to speed up the reaction rate. The reaction takes place between isopentyl alcohol and acetic acid to produce isopentyl acetate and water.
For more information follow this link: https://brainly.com/question/29978390
#SPJ11
How many moles of gas does it take to occupy 120 liters at a pressure of 2.3 atmospheres and a temperature of 350 K?
Remember:R=0.0821 L•atm/mol k
A. 9.6 mol
B. 3.4 mol
C. 4.7 mol
D.0.79 mol
Answer:
A - 9.6 mol.
Explanation:
Took the test.
which of these groups of particles has the greatest mass? which of these groups of particles has the greatest mass? a helium nucleus with two protons and two neutrons four electrons four individual protons
The helium nucleus with two protons and two neutrons has the greatest mass. This is because protons and neutrons have much greater mass than electrons. The nucleus of a helium atom is made up of two protons and two neutrons, so it has a greater mass than four individual protons.
Out of the given groups of particles, a helium nucleus with two protons and two neutrons has the greatest mass.What is a nucleus?
A nucleus is the center of an atom, containing positively charged protons and uncharged neutrons. It's where almost all of an atom's mass is located. Electrons, which are negatively charged particles that orbit the nucleus in shells, are also present in an atom. The mass of an atom is largely determined by the mass of its nucleus, which is made up of positively charged protons and uncharged neutrons. Since the helium nucleus is composed of two protons and two neutrons, it is the group of particles with the greatest mass. Thus, out of the given groups of particles, a helium nucleus with two protons and two neutrons has the greatest mass.
For more details follow the link: https://brainly.com/question/9650040
#SPJ11
in this experiment, you qualitatively observed reactions and recorded observations. there is error associated with this. meika thinks its a systematic error. select the option that best defends meika's position. a. you will carefully time each part of the experiment
b. the experimental work will consist mostly of careful observation, recorded concisely and accurately
c. your work needs to be of higher quality than you have previously demonstrated
d. you will be doing many quantitative measurements, for example weighings, etc.
The answer that best defends Meika's position that there is a systematic error associated with the experiment where you qualitatively observed reactions and recorded observations is option C: your work needs to be of higher quality than you have previously demonstrated.
Systematic errors are those that occur repeatedly and are reproducible. They may be caused by flaws in the experimental design, apparatus or procedure, or may occur because of human error. In a sense, a systematic error is a flaw in the measurement process that leads to incorrect results. These types of errors often result in measurements that are either consistently high or low, but not random.Qualitative observations are made using your senses, such as sight, smell, touch, and taste. A qualitative observation is a detailed examination of something that allows us to define its characteristics or properties. Observations, in general, are used to gather data that is used to support or refute a hypothesis.In this experiment, it was stated that you qualitatively observed reactions and recorded observations. Therefore, you made observations based on what you saw, heard, or smelled, rather than based on quantitative measurements. Since you didn't measure anything, the error associated with this experiment must be due to other factors, such as flaws in the experimental design or apparatus or human error.In this regard, the option that best defends Meika's position that there is a systematic error associated with the experiment where you qualitatively observed reactions and recorded observations is option C: your work needs to be of higher quality than you have previously demonstrated. Meika's position is that the errors in the experiment are not random and that they are due to a flaw in the experimental design or apparatus, or human error. Therefore, the work needs to be of higher quality than previously demonstrated to prevent systematic errors from occurring.Learn more about systematic error: https://brainly.com/question/14639975
#SPJ11
If 50 grams of water are saturated at 90°C with potassium nitrate and then cooled to 40°C, how much will precipitate?
Answer:
43.1gramms
Explanation:
change the temperatures to kelvin
90--363
40--313
50grams of water are saturated at 90 degree celcius.
then,
50___363
x_____313
then cross multiply
363x=15650
divide both sides by 363
x=43.1gramms
why don’t we change the subscripts in order to balance an equation?
Answer:
Because if we changed the subscript number we will change the identity of the compound and we Well creat a new compound or substance different than what they gave us to balance also the law of conservation of mass states that the mass cannot be created nor destroyed.
Explanation:
74. 5 g of KCl was dissolved in 1000. ML of water. What is the
molality of the solution? (Molar mass of KCI = 74. 5 g/mol)
m.
The molarity of the solution is 1.0 m
The first step is to convert the mass of KCl to moles:
Number of moles of KCl = 74.5 g / 74.5 g/mol = 1.0 mol
Next, we need to calculate the mass of water in kilograms:
Mass of water = 1000 mL x 1 L/1000 mL x 1 kg/L = 1 kg
Now we can calculate the molality of the solution:
Molality = moles of solute / mass of solvent (in kg)
Molality = 1.0 mol / 1 kg = 1.0 m
Therefore, the molality of the solution is 1.0 m.
To know more about molarity click here:
brainly.com/question/8732513
#SPJ4
A neutralization reaction produces H2O and LiNO3. Select the acid-base reactants for this neutralization reaction.
Group of answer choices
a. LiOH
b. HNO
c. LiNO
d. HNO3
e. HLi
The acid-base reactants in this neutralization reaction are (a) LiOH and (d) HNO₃. LiOH is the base in this reaction and HNO₃ is the acid.
A neutralization reaction is a type of chemical reaction in which an acid and a base react to form a salt and water, with the water molecule (H₂O) released as a byproduct. The chemical reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH) is an example of a neutralization reaction.
HCl + NaOH → NaCl + H₂O
For this reaction, hydrochloric acid and sodium hydroxide are acid-base reactants. Sodium chloride is a salt produced by the reaction, and water is produced as a byproduct.
The acid-base reactants for the neutralization reaction that produces H₂O and LiNO₃ are LiOH and HNO₃.
LiOH + HNO₃ → LiNO₃ + H₂O
Lithium hydroxide (LiOH) is a strong base, and nitric acid (HNO₃) is a strong acid. They react to form lithium nitrate (LiNO₃) and water (H₂O), which is a neutral solution.
Therefore, the acid and base in the neutralization reaction that produces H₂O and LiNO₃ are HNO₃ and LiOH respectively.
To know more about neutralization, refer here:
https://brainly.com/question/20038776#
#SPJ11
a burette has an initial reading of 3.50 ml. an experimenter opens the stopcock and after some time closes it recording a new burette reading of 12.75 ml. the experimenter repeats this two more times recording new readings of 15.60 ml and 17.25 ml. what is the total ml of titrant that has been dispensed from the burette.
The total volume (in ml) of the titrant that has been dispensed from the burette is 13.75 ml.
What is a burette?A burette is a laboratory apparatus that is used in analytical chemistry to dispense a liquid reagent in a precise and controlled volume to conduct experiments. It consists of a graduated glass tube with a stopcock at the bottom and a funnel at the top that is attached to a burette stand.
Titrant refers to a solution of known concentration that is slowly added to a solution of unknown concentration until a reaction has been completed. When the reaction has been completed, the amount of titrant that has been added is calculated from the burette readings and used to determine the concentration of the unknown solution given that the reaction equation is known.
Here, initial burette reading (Vi) = 3.50 ml, final burette reading (Vf) after first addition = 12.75 ml
Volume of titrant used in the first addition = Vf - Vi = 12.75 ml - 3.50 ml = 9.25 ml
Final burette reading (Vf) after second addition = 15.60 ml
Volume of titrant used in the second addition = Vf - Vi = 15.60 ml - 12.75 ml = 2.85 ml
Final burette reading (Vf) after third addition = 17.25 ml
Volume of titrant used in the third addition = Vf - Vi = 17.25 ml - 15.60 ml = 1.65 ml
The total volume of titrant that has been dispensed from the burette is the sum of the volume of titrant used in all three additions. Therefore, Total volume of titrant = Volume of titrant in first addition + Volume of titrant in second addition + Volume of titrant in third addition= 9.25 ml + 2.85 ml + 1.65 ml= 13.75 ml
Hence, the total ml of titrant that has been dispensed from the burette is 13.75 ml.
Learn more about Titration here:
https://brainly.com/question/2728613
#SPJ11