F. A 50. A resistor (R2), and unknown resistor R2, a 120 Volt source, and an ammeter are connected in a
complete circuit. The ammeter reads 0.50 ampere (current).
R1
a. Determine the resistance of Rz.
R2
Complete question is;
A 50.-ohm resistor, an unknown resistor R, a 120-volt source, and an ammeter are connected in a complete circuit. The ammeter reads 0.50 ampere.
A) Calculate the equivalent resistance of the circuit shown.
B) Determine the resistance of resistor R shown in the diagram.
Answer:
A) R_eq = 240 Ω
B) R = 190 Ω
Explanation:
A) To get the equivalent resistance, we will use the formula;
R = V/I
Where;
V is Voltage
I is current
R is equivalent resistance
From the question, V = 120 V and I = 0.5A
Thus;
R_eq = 120/0.5
R_eq = 240 Ω
B) From the image, we see that the resistors are connected in series.
Formula for resistors in series is;
R = R1 + R2 +..... Rn
Thus;
240 = 50 + R
R = 240 - 50
R = 190 Ω
A) The equivalent resistance of the circuit shown will be 240 Ω.
B) The resistance of resistor R will be 190 Ω
What is resistance?Resistance is a type of opposition force due to which the flow of current is reduced in the material or wire. Resistance is the enemy of the flow of current.
The given data in the problem is;
R is the resistance = 50.-ohm
v is the voltage = 120-volt source
I is the value of the current =0.50 ampere.
A) The equivalent resistance of the circuit shown will be 240 Ω.
According to ohm's law
[tex]\rm R= \frac{V}{I} \\\\ \rm R= \frac{120}{0.5} \\\\ \rm R=240 \ ohm[/tex]
Hence the equivalent resistance of the circuit shown will be 240 Ω.
B) The resistance of resistor R will be 190 Ω
The given resistors are connected in the series;
R = R1 + R2 +..... Rn
240 = 50 + R
R = 240 - 50
R = 190 Ω
Hence the resistance of resistor R will be 190 Ω
To learn more about the resistance refer to the link;
https://brainly.com/question/20708652
Car A is stopped at a traffic light. At the moment it starts to move again, it is situated 330 m from car B, which is traveling in the opposite direction at a constant velocity of 18.0 m/s. If car A accelerates at a rate of 3.0 m/s^2, where and after how long will the two cars pass each
other?
Please answer this question with steps..
Answer:
hopr
Explanation:
Answer:
How do u delete your questions on this app
When drawing a vector, you should represent the magnitude of the vector by the length of the arrow. A. True O B. False
Answer: A. True
Explanation:
Answer:
A. True
Explanation:
A vector in this sense is a thing that has both magnitude (length) and direction.
Say you're walking at a speed of 5 miles per hour. If you keep walking in a straight line, then in two hours you will have walked 10 miles.
This doesn't give any information about where you started or any information about where you ended up after those 2 hours.
This is because "speed" is a scalar. It's a number with no associated geometry. It's just a magnitude. It's the magnitude of velocity.
Velocity is a vector.
Marcus found that the weight of a rock on Earth is 22.5 newtons. He knows that the gravity on Saturn is 0.93 times the gravity on Earth. What would the weight of this rock be on Saturn?
Answer:
The weight of the rock on Saturn would be 21.375
Explanation:
Since the weight on Saturn is 0.93 times the weight on Earth you would multiply 22.5 x0.93. This bring you too 21.375when you blow across the top of a soda bottle, it acts like a closed pipe. If the inside of the bottle is 0.150 m long, what is the fundamental frequency you hear?
(speed of sound=343 m/s)
(unit=hz)
Answer:
The new fundamental frequency will be 598.7Hz. The length of the soda bottle is 0.173 meters. Thus, the new fundamental frequency is 598.7Hz.
Explanation:
Please give me brainlist
Answer:2860 hz
Explanation:
Trust me
PLS ANSWER FAST WILL GIVE BRAINLY!!!
In order for a roller coaster to work, why does the hill the cart climbs need to be higher than the top of the loop?
Answer:
The concept of potential energy, often referred to as energy of position, is very simple: As the coaster gets higher in the air, gravity can pull it down a greater distance. ... The potential energy you build going up the hill can be released as kinetic energy — the energy of motion that takes you down the hill.
Potential energy, also known as energy of position, is a pretty straightforward idea. As the roller coaster rises in the air, gravity has a greater ability to pull it down.
What does the hill the cart climbs need?An easy illustration involves a stopped car at the summit of a hill. The car drives faster as it goes down the hill, which results in an increase in kinetic energy and a decrease in potential energy. The vehicle changes kinetic energy into potential energy as it ascends the hill.
They are higher up at the top of the hill, thus they have more potential energy. Moving down a slope transforms potential energy into kinetic energy, while moving up a hill transforms kinetic energy into potential energy.
Therefore, You can release the potential energy you accumulate while climbing a hill as kinetic energy, which is the energy of motion that propels you down the hill.
Learn more about cart here:
https://brainly.com/question/7726236
#SPJ2
Help please!!! Physics circular motion
Answer:
2. 3.1415 m/s
3. 0.63m
4. 0.006 m/s^2
Explanation:
2. v=(2*pi*r))/T, put in values and solve.
3. Circumference=2*pi*radius, radius is 0.1m, plug in and solve.
4. a=(v^2)/r, (don't worry about converting to meters, since units are the same in kilometers, they will cancel out) plug in values and solve.
That's it!
Science Question: why do astronauts wear organge suits vs white suits
Follow answer please...
Need help with this one question!
Answer:
Actual Mechanical Advantage
Explanation:
AMA=mg/F(applied)
HELPPPP WILL MARK B IF CORRECT!!!!
As time goes on, the ENTROPY in a closed system should increase. This is because of which Law?
A) Conservation of Energy
B) Conservation of Momentum
C) 1st Law of Thermodynamics
D) 2nd Law of Thermodynamics
E) None of these
Answer:
The answer is D
The second law of thermodynamics
Mickey had three substances. He hit each of them with a hammer. A red
substance was malleable and easily flattened. A white crystal cracked but did
not break. A silver substance flattened but did not crack. Which two
statements could be true?
A. The silver substance is a metal,
B. The red substance is ionic,
C. The silver substance is ionic.
I D. The white substance is ionic.
Answer:
A & D
Explanation:
Took the test already
The two statements that could be true on the basis of the information given in the question are as follows:
The silver substance is metal.The white substance is ionic.Thus, the correct options are A and D.
What are the properties of metal?The properties of the metal are described as follows:
They are good conductors of heat and electricity.They possess high melting points and high density. They are malleable, ductile, and lustrous in nature. They are generally hard as compared to other elements.The silver substance is metal because it is flattened into thin sheets but did not crack. This shows the property of malleability of metals. The white substance is ionic because it is cracked but did not break. It shows that ionic compounds are tough to break.
A red substance is also metal but does not express in any options.
Therefore, the correct options for this question are A and D.
To learn more about the Properties of metal, refer to the link:
https://brainly.com/question/1301107
#SPJ5
Please help me with this
Answer:
I can't really see it sorry
Explain which components could be used to switch a heater and a light on in a hospital incubator
a switch
ssdgfsddgsgbsssdgfsddgsgbsssdgfsddgsgbs
How do the particles in a Longitudinal Wave move?
A) Parallel to the direction of the wave
B) Perpendicular to the direction of the wave
C) Particles do not move
D) The particle is the wave (wave packet)
Explanation:
In a longitudinal wave the particle displacement is parallel to the direction of wave propagation. The particles do not move down the tube with the wave; they simply oscillate back and forth about their individual equilibrium positions. Pick a single particle and watch its motion.
A weight-lifter raises a 2000 N weight through a vertical height of 2.0m in 0.80 s.
What useful power does he develop in doing this?
A
800 W
B
3200W
с
4000 W
D
5000W
Answer:
D. 5000W
Explanation:
Given the following data;
Force = 2000N
Distance = 2m
Time = 0.8s
To find the power;
First of all, we would determine the workdone by the weightlifter
Workdone = force * distance
Workdone = 2000 * 2
Workdone = 4000N
Now, we can find the power using the formula;
Power = workdone/time
Substituting into the equation, we have
Power = 4000/0.8
Power = 5000 Watts
How do you get on the cheer squad?!
Answer:
you don't cuz cheerleaders only get in the way of the football game
If a car used 250,000 W of power to complete a race in 12 s, how much work did the car do?
Answer:
3,000,000 Joules!
Explanation:
power=work/t
250000=work/12
work=3,000,000 Joules
rock at the edge of a cliff has kinetic energy because of its position.
True
False
its false rock is at edge
Are acceleration and mass proportional or inversely proportional values?
Answer:
acceleration and mass are inversely proportional values
Explanation:
The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
If the force exerted by a man is halved and the distance is multiplied by four, by which factor does the work change ?
A. Increase by a factor of 8
B. Decrease by a factor of 2
C. Increase by a factor of 2
D. Increase by a factor of 4
increase factor by 8 thousands
What is 8 x 10-2 in ordinary form?
78 is the answer hope it helps
True or false? If two components are connected in series, the current through one component will
always be the same as the current through the other.
the answer is ( True ) .
the current is the same in series circuits .
what is true about a pseudoscientific
Answer:
C: it ignores parts of the method within an investigation
A flight distance from philadelphia to cancun is 1469 miles.the estimated flight time is 3.25 hours.What is the avarage speeede of the plane in miles per hour(number and units)?
Answer:
1469 miles /3.25 hours = 452 miles per hours
Explanation:
divide distance by the time it takes to get there
2 t of ferrous scrap at a temperature of 20 degrees is heated to the melting point and melted. How much to consume?
Answer
Calculate the amount of heat needed to melt 2.00 kg of iron at its melting point (1809 K), given that: ?Hfus = 13.80
How the choice of building materials and techniques can help them cool down faster, after heating up.
Answer:
The choice of building materials and techniques can help them cool down faster, after heating up is explained below in brief details.
Explanation:
Building materials
Buildings that are composed of rock, bricks, or pavement, or inserted into the territory, can seem cooler thanks to the great "thermal mass" of these elements – that is, their capability to assimilate and discharge heat gently, thereby softening temperatures over time, producing daytime cooler and night-time warmer.
Each bat can produce different frequencies of ultrasound. Explain why this is useful if there are many bats hunting together.
Answer: Although low frequency sound travels further than high-frequency sound, calls at higher frequencies give the bats more detailed information--such as size, range, position, speed and direction of a prey's flight. Thus, these sounds are used more often.
Explanation:
What is the limiting factor of speed for an object falling through the air?
⭐Air Resistance is the factor, which limits the speed of an object falling through the air...⭐
____________________________________________________
<Judge It Yourself...>
Hope it helps you! ヅ
✪ Be Brainly ✪
Which phrase best describes a machine?
any device that makes work easier
any device that moves an object
any device that has multiple parts
any device that uses energy