The mean time to admit an emergency patient to the Mount Nittany Medical Center is 5 minutes with a standard deviation of 3 minutes. Only trauma patients are admitted to this center. Also, assume that the admission process is in fact the radiography process via an X-Ray machine.
(a) What is the natural coefficient of variation for one patient?
C0 : ______________
(b) If the admission times of patients are independent, what will be the mean and variance of admitting a group of 50 emergency patients? What will be the coefficient of variation of a group of 50 emergency patients?
t0 : ______________ σ02 : ______________ C0 :______________
(c) The X-Ray machine in the center may fail at any time randomly. The time to failure is exponentially distributed with a mean of 80 hours and the repair time is also exponentially distributed with a mean of 4 hours. What will be the effective mean and coefficient of variation of the admission time for a group of 50 trauma patients?
te : ______________ σe 2 :____________ Ce :______________
(d) Determine the variability class of the squared-coefficients of variation in Parts a-c (e.g., low variability, moderate variability, or high variability.)
C0 2(Part a): ______________ C0 2(Part b): ______________ Ce 2(Part c): ______________
(e) In two sentences, describe how the manager of center can improve the inflated effective admission time in Part c?

Answers

Answer 1

(a) The natural coefficient of variation for one patient is the ratio of the standard deviation to the mean, expressed as a percentage:

C0 = (standard deviation / mean) x 100% = (3 / 5) x 100% = 60%.

(b) If the admission times of patients are independent, the mean and variance of admitting a group of 50 emergency patients can be calculated as follows:

mean = n x mean time = 50 x 5 = 250 minutes

variance = n x variance of individual patient / sample size = 50 x (3)^2 / 50 = 9

The coefficient of variation for a group of 50 emergency patients is the ratio of the standard deviation to the mean, expressed as a percentage:

C0 = (standard deviation / mean) x 100% = (3 / 5) x 100% = 60%.

(c) The effective mean and coefficient of variation of the admission time for a group of 50 trauma patients can be calculated using the following formula:

te = n x mean time / (1 - p1 x p2)

where p1 is the probability of machine failure and p2 is the probability of repair completion. Assuming the machine can fail at any time, p1 can be calculated as 1 / (mean time between failures / mean admission time) = 1 / (80 x 60 / 5) = 0.001042. Assuming the repair time is also exponentially distributed, p2 can be calculated as 1 / mean repair time = 1 / 4 = 0.25. Therefore, te = 50 x 5 / (1 - 0.001042 x 0.25) = 250.14 minutes. The variance of the admission time can be calculated using the formula:

σe^2 = n x variance of individual patient / (1 - p1 x p2)^2 = 50 x (3)^2 / (1 - 0.001042 x 0.25)^2 = 10.81. The coefficient of variation for a group of 50 trauma patients is the ratio of the standard deviation to the mean, expressed as a percentage:

Ce = (standard deviation / mean) x 100% = (sqrt(10.81) / 250.14) x 100% = 2.60%.

(d) The variability class of the squared coefficients of variation can be determined as follows:

C0² (Part a): (0.6)^2 = 0.36 (low variability)

C0² (Part b): (0.6)^2 = 0.36 (low variability)

Ce² (Part c): (0.026)^2 = 0.000676 (low variability)

(e) The manager of the center can improve the inflated effective admission time in Part c by implementing preventive maintenance measures to reduce the probability of machine failure, such as regular inspection and cleaning of the X-Ray machine, and by improving the repair process to reduce the mean repair time, such as hiring more skilled technicians or improving the repair procedures.

Find out more about the natural coefficient of variation

at brainly.com/question/30476966

#SPJ4


Related Questions

Find the Z-score for each of the following IQ scores
90 160(Einstein's IQ)

Answers

Answer:

z=3.75

Step-by-step explanation:

6TH GRADE MATH PLS HELP TYSM

Answers

Answer:

m = 1

Step-by-step explanation:

Slope = rise/run or (y2 - y1) / (x2 - x1)

Pick 2 points (-1,0) (0,1)

We see the y increase by 1 and the x increase by 1, so the slope is

m = 1

When I first look at an equation, HOW DO I KNOW which method to use to solve it?
for example:

-4(7j+2) = 10

What do I look for (by looking at it) to know if I should start to solve it by distributing, or just use division?

Please help! I am really confused. Thank you

Answers

Answer:

j = - 9/14

Step-by-step explanation:

-4(7j+2) = 10

Distributing First

-28j - 8 = 10

Try to get the variable on one side.

-28j = 18

Divide both sides by -28

j = -18/28 = - 9/14

Which expressions are equivalent to 8(3/4y -2)+6(-1/2+4)+1

Answers

Answer: 6y + 6

Step-by-step explanation:

To simplify the expression 8(3/4y -2) + 6(-1/2+4) + 1, we can follow the order of operations (PEMDAS):

First, we simplify the expression within parentheses, working from the inside out:

6(-1/2+4) = 6(7/2) = 21

Next, we distribute the coefficient of 8 to the terms within the first set of parentheses:

8(3/4y -2) = 6y - 16

Finally, we combine the simplified terms:

8(3/4y -2) + 6(-1/2+4) + 1 = 6y - 16 + 21 + 1 = 6y + 6

Therefore, the expression 8(3/4y -2) + 6(-1/2+4) + 1 is equivalent to 6y + 6.

Determine whether each of these functions from
Z
to
Z
is one-to-one (i.e., injective). (3 pts in total) (a)
f(n)=n−3
(b)
f(n)=n 2
−1
(c)
f(n)=n 5

Answers

The function f(n) = n - 3 maps distinct integers to distinct integers, and thus is injective.

(a) The function f(n) = n - 3 is one-to-one (injective). To prove this, suppose that f(a) = f(b) for some integers a and b. Then, we have a - 3 = b - 3, which implies a = b. Therefore, the function f(n) = n - 3 maps distinct integers to distinct integers, and thus is injective.

(b) The function f(n) = n^2 - 1 is not one-to-one (not injective). To see this, note that f(1) = f(-1) = 0, so different inputs map to the same output. In general, for any positive integer k, we have f(k) = f(-k), since (k^2 - 1) = ((-k)^2 - 1). Therefore, the function f(n) = n^2 - 1 is not injective.

(c) The function f(n) = n^5 is one-to-one (injective). To prove this, suppose that f(a) = f(b) for some integers a and b. Then, we have a^5 = b^5, which implies a = b (since the fifth root of a non-zero real number is unique). Therefore, the function f(n) = n^5 maps distinct integers to distinct integers, and thus is injective.

Find out more about functionsat  

brainly.com/question/13262879

#SPJ4

Sorry if photo is side ways or upside down

Answers

Hi! For question 4:

1 gallon = 8 pints, therefore 2 gallons = 16 pints.

10 members = 10 pints drank, which means 16-10=6 pints left (A).


For question 5:
PART A
1 step = 1 meter
1km = 1,000 meter, hence
5km = 5,000 steps.


PART B
1 step = 0.5 meters
1km = 2,000 steps, hence
5km = 10,000 steps.

Hope this helped you!

Question 2 (2 points) ✓ Saved
In the news, you hear "tuition is expected to increase by 12% next year." If tuition
this year was $5,500 per year, what will it be next year?
660
6160
4840
Cannot be solved.

Answers

Answer: 6,160

Step-by-step explanation:

Immediately, without even doing any math, the only logical answer would be 6160. This is because the current tuition is 5,500 and it is increasing so the answer cannot be lower.

However, mathematically you can prove this by turning 12% into a decimal and multiplying it by 5,500. 12% could be converted to .12 and because it is increasing you must add 1, or 100%, since that is what it started with. 5,500 x 1.12 = 6,160.

5 Mrs. Newsome bought a piece of fabric 142 centimeters long to make a quilt for her son's bedroom. She bought a piece of fabric 2 meters long for curtains. How could Mrs. Newsome find the total length, in centimeters, of both pieces of fabric? Multiply 2 by 2,000, then add 142. Add 2 and 142, then multiply by 100. Divide 142 by 100, then add 2,000. O Multiply 2 by 100, then add 142. B C​

Answers

Answer:

Step-by-step explanation:

To find the total length of both pieces of fabric in centimeters, we need to add the length of the first piece of fabric (142 cm) and the length of the second piece of fabric (2 meters).

However, we need to make sure that the units are consistent before we add the lengths. We can convert the length of the second piece of fabric from meters to centimeters by multiplying by 100. Therefore, the total length in centimeters is:

142 cm + 2 meters * 100 cm/meter = 142 cm + 200 cm = 342 cm

The option that correctly gives the answer is "Multiply 2 by 100, then add 142" (Option C).

Which ordered pair maximizes the objective function p=3x+8y

(0,0)
(2,7)
(5,6)
(8,1)

Answers

Answer:

P(5,6) = 63

Step-by-step explanation:

Test each point to see which ordered pair maximizes the objective function:

(0,0): p = 3(0) + 8(0) = 0

(2,7): p = 3(2) + 8(7) = 6 + 56 = 62

(5,6): p = 3(5) + 8(6) = 15 + 48 = 63

(8,1): p = 3(8) + 8(1) = 24 + 8 = 32

Hence, (5,6) is the ordered pair that maximizes the objective function.

a
21 units squared
b
27.6 units squared
c
32.2 units squared
d
42 units squared

Answers

The area of the right triangle given in this problem is given as follows:

21 units squared -> Option A.

How to obtain the area of a triangle?

To calculate the area of a triangle, you can use the formula presented as follows:

Area = (1/2) x base x height

In which the parameters are given as follows:

"base" is the length of the side of the triangle that is perpendicular to the height."height" is the length of the perpendicular line segment from the base to the opposite vertex.

For a right triangle, we can consider one side to be the base and the other side to be the height, hence the parameters are given as follows:

Base of 7 units.Height of 6 units.

Hence the area of the triangle is given as follows:

A = 0.5 x 7 x 6 = 21 units squared.

Missing Information

The complete problem is defined as follows:

"Calculate the area of the given triangle".

More can be learned about the area of a triangle at brainly.com/question/21735282

#SPJ1

HELP ASAP PLEASE! A yard plan includes a rectangular garden that is surrounded by bricks. In the drawing, the garden is 7 inches by 4 inches. The length and width of the actual garden will be 35 times larger than the length and width in the drawing.

What is the perimeter of the drawing? Show your work.

What is the perimeter of the actual garden? Show your work.

What is the effect on the perimeter of the garden with the dimensions are multiplied by 35? Show your work.

Answers

The perimeter of the garden in the drawing is 22 inches and the perimeter of the actual garden is 770 inches

The perimeter of the drawing

The perimeter of the garden in the drawing is calculated as

Perimeter of garden in drawing = 2(length + width)

So, we have

Perimeter of garden in drawing = 2(7 inches + 4 inches)

Evaluate

Perimeter of garden in drawing = 22 inches

So the perimeter of the garden in the drawing is 22 inches.

The perimeter of the actual garden

For the perimeter of the actual garden, we have

Perimeter of actual garden = 22 inches * 35

Perimeter of actual garden = 770 inches

The effect on the perimeter

We can see that the perimeter of the actual garden is 35 times larger than the perimeter of the garden in the drawing.

This makes sense since the length and width of the actual garden are 35 times larger than the length and width in the drawing, so the perimeter (which is the sum of the lengths of all four sides) would also be 35 times larger.

Read more about scale drawing at

https://brainly.com/question/29229124

#SPJ1

If r and s are constants and r² +rx + 12 is equivalent to (x+3)(x + 5), what is the value of r?

F.:3
H. 7
J. 12
K. Cannot be determined from the given information

Answers

Answer:

H. 7

Step-by-step explanation:

Given x² + rx + 12 is equivalent to (x + 3)(x + s), equate the two expressions and expand the right side of the equation:

[tex]\begin{aligned}x^2+rx+12&=(x + 3)(x + s)\\ x^2+rx+12&=x^2 + sx + 3x + 3s\\x^2+rx+12&=x^2 + (s+3)x + 3s\end{aligned}[/tex]

To find the value of r, first find the value of s.

The constant term of the right-hand side must be equal to the constant term of the left-hand side. Therefore:

[tex]\implies 3s = 12[/tex]

Solve for s by dividing both sides of the equation by 3:

[tex]\implies s = 4[/tex]

Compare the coefficients of the terms in x:

[tex]\implies r = s + 3[/tex]

Substitute the value of s into the equation and solve for r:

[tex]\begin{aligned} \implies r &= s + 3\\&= 4 + 3\\&= 7\end{aligned}[/tex]

Therefore, the value of r is 7.

Answer:

[tex]\large\boxed{\sf r = 7 }[/tex]

Step-by-step explanation:

Correct question:- If r and s are constants and r² +rx + 12 is equivalent to (x+3)(x + s), what is the value of r?

Here we are given that , the expression (x+3)(x+s) is equal to r² + rx + 12 .

Firstly, expand the expression (x+3)(x+s) as ,

[tex]\implies (x+3)(x+s) \\[/tex]

[tex]\implies x(x+s)+3(x+s) \\[/tex]

[tex]\implies x^2 + xs + 3x + 3s \\[/tex]

Take out x as common,

[tex]\implies x^2 + (3+s)x + 3s \\[/tex]

Now according to the question,

[tex]\implies x^2 + (3+s)x + 3s = r^2 + rx + 12\\[/tex]

On comparing the respective terms , we get,

[tex]\implies r = 3 + s \\[/tex]

[tex]\implies 3s = 12 \\[/tex]

Solve the second equation to find out the value of s , so that we can substitute that in equation 1 to find "r" .

[tex]\implies 3s = 12 \\[/tex]

[tex]\implies s =\dfrac{12}{3}=\boxed{4} \\[/tex]

Now substitute this value in equation (1) as ,

[tex]\implies r = 3 + s \\[/tex]

[tex]\implies r = 3 + 4 \\[/tex]

[tex]\implies \underline{\underline{ \red{ r = 7 }}} \\[/tex]

and we are done!

Assume the weight of a randomly chosen American passenger car is a uniformly distributed random variable ranging from 1,557 pounds to 4,665 pounds.(e) What is the probability that a vehicle will weigh between 1,946 and 4,455 pounds? (Round your answer to 4 decimal places.)

Answers

The probability that a vehicle will weigh between 1,946 and 4,455 pounds is 0.8076.

To solve this problem, we need to find the probability that a randomly chosen car weighs between 1,946 and 4,455 pounds. Since weight is uniformly distributed, we know that the probability density function is constant over the entire range of possible values.

First, we need to find the total range of possible values:

Range = maximum weight - minimum weight

Range = 4,665 - 1,557

Range = 3,108

Next, we need to find the range of values that fall between 1,946 and 4,455:

Target range = 4,455 - 1,946

Target range = 2,509

Finally, we can calculate the probability of a randomly chosen car falling within this target range:

Probability = Target range / Range

Probability = 2,509 / 3,108

Probability = 0.8076 (rounded to 4 decimal places)

Learn more about probability here: brainly.com/question/30034780

#SPJ4

the solution set is
5r+20/10=3r-6/3

Answers

Answer:

r = -2

Step-by-step explanation:

5r + 20/10 = 3r -6/3

5r + 2 = 3r - 2

2r + 2 = -2

2r = -4

r = -2

Answer: r = -2

Step-by-step explanati

divide 14 hours and 40 minutes by 5
you must give your answer in hours and minutes

Answers

Answer:

2 hours and 56 minutes.

Step-by-step explanation:

To divide 14 hours and 40 minutes by 5, we need to convert everything to minutes first.

14 hours is equal to 14 x 60 = 840 minutes.

So, 14 hours and 40 minutes are equal to 840 + 40 = 880 minutes.

Dividing 880 minutes by 5 gives us:

880 ÷ 5 = 176 minutes

Now, we need to convert the answer back to hours and minutes.

There are 60 minutes in 1 hour, so we can find how many hours are in 176 minutes by dividing by 60:

176 ÷ 60 = 2 with a remainder of 56.

So, the answer is 2 hours and 56 minutes.

f(s) = 3s + 2
p(s) = s^3+ 4s
Find (f • p)(-5)

Answers

The value of (f • p)(-5) is 1885 when functions are given as f(s) = 3s + 2 and p(s) = s³+ 4s.

What is function?

In mathematics, a function is a relation between a set of inputs and a set of possible outputs with the property that each input is related to exactly one output. It is often represented by an equation or formula, and can be visualized as a graph. Functions are widely used in various areas of mathematics, science, engineering, and other fields to model real-world phenomena and solve problems.

Here,

f(s) = 3s + 2

p(s) = s³+ 4s

To find (f • p)(-5), we need to first find f(-5) and p(-5), and then multiply them together. To find f(-5), we substitute -5 into the function f(s) and simplify:

f(-5) = 3(-5) + 2

= -13

To find p(-5), we substitute -5 into the function p(s) and simplify:

p(-5) = (-5)³ + 4(-5)

= -125 - 20

= -145

Now we can multiply f(-5) and p(-5) together to find (f • p)(-5):

(f • p)(-5) = f(-5) * p(-5)

= (-13) * (-145)

= 1885

To know more about function,

https://brainly.com/question/28193995

#SPJ1

11/12 x 8/25 x 15/16 x 9/44

Answers

Exact form:

9/160

Decimal form:

0.05625

CAN SOMEONE HELP WITH THIS QUESTION?✨

Answers

Step-by-step explanation:

it was not clear if an average change rate would be sufficient, or if you needed an immediate change rate (as I also don't know if you covered derivatives already or not).

so, it would be helpful, if you could put a message to an answer that was not giving you what you need.

so, here now an answer for an immediate change rate (hopefully that is what you need) :

we have a right-angled triangle.

the direct line of sight (the direct distance between police and red car) is the Hypotenuse (the baseline opposite of the 90° angle).

the 50 ft and 180 ft are the legs.

Pythagoras gives us the length of the Hypotenuse :

Hypotenuse² = 50² + 180² = 2500 + 32400 = 34,900

Hypotenuse = sqrt(34900) = 186.8154169... ft

in general terms let's say x is the distance of the cop to the road, y is the distance on the road to the crossing point with the distance cop to road, and z is the line of sight distance between the red car and the cop (the Hypotenuse).

x² + y² = z²

now, the first derivative of distance is the change of distance = speed.

then dy/dt (= y') is how fast the car is traveling down the road. dx/dt (= x') is how fast the cop is traveling toward the road. and dz/dt (= z') is how fast the distance between the cop and the car is changing.

now, we take the derivative of our equation

x² + y² = z² with respect to time, variable by variable :

d(x² + y² = z²)/dt =

dx²/dx × dx/dt + dy²/dy × dy/dt = dz²/dz × dz/dt

that gives us the equation

2x(dx/dt) + 2y(dy/dt) = 2z(dz/dt)

x(dx/dt) + y(dy/dt) = z(dz/dt)

from the problem we know x (50 ft), y (180 ft), dz/dt (85 ft/s). we calculated z (the Hypotenuse = sqrt(34900), and since the cop is not moving, we know dx/dt = 0.

and we get

50ft×0ft/s + 180ft×(y') = sqrt(34900)ft×(85)ft/s

we solve for y' (the speed of the car on the road)

y' = sqrt(34900)×85/180 = 88.21839132... ft/s

≈ 88.22 ft/s

and now here the difference for an average change rate over the unrevealed of 1 second :

the radar measured the change of the distance (Hypotenuse) from 1 second ago to now.

so, 1 second ago, the distance was

186.8154169... + 85 = 271.8154169... ft

the 50 ft leg stays the same, but the 180 ft leg was (again via Pythagoras)

271.8154169...² = 50² + leg²

leg² = 271.8154169...² - 50² = 71,383.62088...

leg = 267.1771339... ft

so, the red car traveled

267.1771339... - 180 = 87.1771339... ft/s

as you can see, it is close, but there has to be a difference, as the average change rate is only an approximation to the immediate change rate.

can someone help me please!

Answers

The median of the data-set is of: 21 minutes.The lower quartile of the data-set is of 13 minutes.The upper quartile of the data-set is of 27 minutes.About 25% of the students ride the bus for less than 13 minutes.About 75% of the students ride the bus for less than 27 minutes.

What are the median and the quartiles of a data-set?

The median is the middle value of a data set when the values are arranged in order from lowest to highest (or highest to lowest). If there is an even number of values, then the median is the average of the two middle values. The median divides the data set into two halves, with half of the values being below the median and half of the values being above the median.

The first quartile, denoted as Q1, is the value that separates the lowest 25% of the data from the rest of the data. The second quartile, denoted as Q2, is the median of the data set. The third quartile, denoted as Q3, is the value that separates the lowest 75% of the data from the rest of the data.

The data-set has in this problem has two-halves of five elements, divided by the number 21, hence the median and the quartiles are given as follows:

The median of the data-set is of: 21 minutes.The lower quartile of the data-set is of 13 minutes. -> Median of the first five elements.The upper quartile of the data-set is of 27 minutes. -> Median of the last five elements.

More can be learned about the median of a data-set at https://brainly.com/question/3514929

#SPJ1

Using a different map that is missing any indication of scale, you measure the distance from Point C
to Point D as five inches, but it is 500 miles on the ground. Prepare the following two expressions
of scale for the map:
(a) Fractional
(b) Written
SHOW YOUR WORK! This includes the potential for partial value, if incorrect.
Simplify your scale (e.g., reduce to 1 inch = x miles, not 5 inches = 250 miles).

Answers

Answer:

To calculate the scale of the map, we can use the following formula:

Scale = Actual distance / Map distance

(a) Fractional scale:

The actual distance between Point C and Point D is 500 miles, and the distance on the map is 5 inches. Therefore, the fractional scale can be calculated as:

Scale = 500 miles / 5 inches

Scale = 100 miles per inch

So the fractional scale of the map is 1 inch = 100 miles.

(b) Written scale:

To express the scale in written form, we can use the ratio of inches to miles. Since 1 inch represents 100 miles, we can write the scale as:

1 inch represents 100 miles

Alternatively, we can simplify the scale to a more common ratio by dividing both sides by 100:

1/100 inch represents 1 mile

Therefore, the written scale of the map is 1/100 inch = 1 mile.

Last years freshman class at Big State university totaled 5,324 students

URGENT

Answers

The amount a student received in merit scholarships was $3,456 ($478 per student). The cost of full tuition was $4,200. This means that the difference between the amount of the scholarship and the cost of tuition was $744.

What is amount ?

Amount is a numerical value that represents a quantity of something. It is used to measure the size, amount, or degree of something, often in terms of money, time, or distance. Amounts are usually expressed in a specific unit, such as dollars, minutes, or kilometers. Amounts can also refer to the total number of something, such as the amount of people in a room or the amount of items in a box. Amounts can also be used to describe a portion or percentage of something, such as the amount of a discount or the amount of interest earned.  

To find the percentage of students who did not receive enough to cover full tuition, we need to divide the difference ($744) by the amount of the scholarship ($3,456). This gives us a percentage of 21.5%.

Rounded to the nearest whole percent, the answer is 22%. This means that 22% of students who received a merit scholarship did not receive enough to cover full tuition.

To learn more about amount

https://brainly.com/question/29550019

#SPJ1

Help pleaseeeeeeeeee!

Answers

Answer:

y = 0.8x

Step-by-step explanation:

machine fills 24 jars in 30 seconds , then

fills 1 jar in [tex]\frac{24}{30}[/tex] = 0.8 seconds

thus number of jars filled in x seconds is

y = 0.8x

Consider the quadratic function f(x) = x2 – 5x + 12. Which statements are true about the function and its graph? Select three options. The value of f(–10) = 82 The graph of the function is a parabola. The graph of the function opens down. The graph contains the point (20, –8). The graph contains the point (0, 0).

Answers

The true statements are:

The graph of the function is a parabola.

The graph contains the point (0, 0).

The graph does not contain the point (20, -8).

How to deal with quadratic equation?

The quadratic function is f(x) = x^2 - 5x + 12. Here are the statements that are true:

The value of f(-10) = 82:

To find f(-10), we substitute -10 for x in the function:

[tex]$$f(-10) = (-10)^2 - 5(-10) + 12 = 100 + 50 + 12 = 162$$[/tex]

Therefore, the statement "The value of f(-10) = 82" is false.

The graph of the function is a parabola:

Since the highest power of x in the function is 2, the graph of the function will be a parabola. Therefore, the statement "The graph of the function is a parabola" is true.

The graph of the function opens down:

The coefficient of [tex]$x^2$[/tex] in the function is positive (+1), which means the parabola opens upwards. Therefore, the statement "The graph of the function opens down" is false.

The graph contains the point (20, –8):

To see whether the point (20, -8) is on the graph of the function, we substitute x=20 into the function:

[tex]$$f(20) = (20)^2 - 5(20) + 12 = 400 - 100 + 12 = 312$$[/tex]

Since the y-coordinate of the point (20, -8) is not equal to 312, the statement "The graph contains the point (20, –8)" is false.

The graph contains the point (0, 0):

To see whether the point (0, 0) is on the graph of the function, we substitute x=0 into the function:

[tex]$$f(0) = (0)^2 - 5(0) + 12 = 12$$[/tex]

Since the y-coordinate of the point (0, 0) is equal to 12, the statement "The graph contains the point (0, 0)" is true.

Therefore, the true statements are:

The graph of the function is a parabola.

The graph contains the point (0, 0).

The graph does not contain the point (20, -8).

To know more about Quadratic equation visit:

brainly.com/question/30098550

#SPJ1

1. In the figure below, solve for the missing side (seems harder then it should be)
A.7
B.8
C.9
D.10

Answers

Answer:

1. a square plus b square is c square where c is the hypotenuse.

so 1. 7^2 + 6^2 = c^2

49+36=c^2

85=c^2

the square root of 85 is c

9.22 is c

all the other questions are blurry :OO

Step-by-step explanation:

a friend has an 81% average before a final exam. The score includes everything but the final, which counts for 15% of the grade. What is the minimum to earn 75% for the course?

Answers

Answer:

57

Step-by-step explanation:

Okay, So we have this person That has 81% average before the quiz. For a course That score includes everything, but the final, which counts for 25% of the course grade, was the best course grade you your friend can earn. Okay, The best course grade given to me makes me. Mhm. 100. So we have .81 times. Actually we'll keep this as 81, times .75 right Plus 100 times. Excuse ME, Time 0.25. This is equivalent to 81 times 0.75. Mhm. This is equivalent to 81 times .75 plus 100 times 0.25, Which equals 85.75%. Now that's for part one. Report to we have what is the minimum score? Turn to 75%. So we have 75 equal to 81 times 0.75 Plus X. Times zero 25. So 81 times 0.75 equals 60.75 75- is value mhm. Is equal to 14.25. So we have 0.25 x. And if we divide 14.25 over 0.25, we isolate X. So the minimum score to get a 75 is a 57

Question 4 X Suppose that starting today, you make deposits at the beginning of each quarterly period for the next 40 years. The first deposit is for 400, but you decrease the size of each deposit by 1% from the previous deposit. Using an nominal annual interest rate of 8% compounded quarterly, find the future value (i.e. the value at the end of 40 years) of these deposits. Give your answer as a decimal rounded to two places (i.e. X.XX).

Answers

if we make quarterly deposits and invest them at an nominal annual interest rate of 8% compounded quarterly for 40 years, we will have $143,004.54 at the end of the 40 years.

The first step in solving this problem is to calculate the amount of each quarterly deposit. We know that the first deposit is $400, and each subsequent deposit decreases by 1% from the previous deposit. This means that each deposit is 99% of the previous deposit. To calculate the size of each deposit, we can use the following formula:

deposit_ n = deposit_(n-1) * 0.99

Using this formula, we can calculate the size of each quarterly deposit as follows:

deposit_1 = $400

deposit_2 = deposit_1 * 0.99 = $396.00

deposit_3 = deposit_2 * 0.99 = $392.04

deposit_4 = deposit_3 * 0.99 = $388.12

...

We can continue this pattern for 40 years (160 quarters) to find the size of each quarterly deposit.

Next, we need to calculate the future value of these deposits using an nominal annual interest rate of 8% compounded quarterly. We can use the formula for compound interest to calculate the future value:

[tex]FV = PV * (1 + r/n)^(n*t)[/tex]

where FV is the future value, PV is the present value (which is zero since we are starting with deposits), r is the nominal annual interest rate (8%), n is the number of times the interest is compounded per year (4 since we are compounding quarterly), and t is the number of years (40).

We can substitute the values into the formula and solve for FV:

[tex]FV = $400 * (1 + 0.08/4)^(440) + $396.00 * (1 + 0.08/4)^(439) + $392.04 * (1 + 0.08/4)^(4*38) + ... + $1.64 * (1 + 0.08/4)^4[/tex]

After solving this equation, we get a future value of $143,004.54, rounded to two decimal places. This means that if we make quarterly deposits and invest them at an nominal annual interest rate of 8% compounded quarterly for 40 years, we will have $143,004.54 at the end of the 40 years.

This calculation highlights the power of compound interest over long periods of time. By making regular contributions and earning interest on those contributions, our investment grows exponentially over time. It also shows the importance of starting early and consistently contributing to an investment over time in order to achieve long-term financial goals.

To know more about quarterly deposit.  click here:

brainly.com/question/17218467

#SPJ4

Can the binomial distribution be approximated by a normal distribution? n = 31, p = 0.9 Explain why or why not.​

Answers

Therefore, we can use the normal distribution with mean 27.9 and standard deviation 1.67 to approximate the binomial distribution with n = 31 and p = 0.9.

What is binomial distribution?

The binomial distribution is characterized by two parameters: the number of trials, denoted by n, and the probability of success on each trial, denoted by p. The probability of obtaining exactly k successes in n trials is given by the binomial probability mass function:

P(k) = (n choose k) * [tex]p^{k}[/tex] * [tex](1-p)^{(n-k)}[/tex],

where (n choose k) is the binomial coefficient, which represents the number of ways to choose k items from a set of n distinct items.

Given by the question.

Yes, the binomial distribution with n = 31 and p = 0.9 can be approximated by a normal distribution.

The conditions for a binomial distribution to be approximated by a normal distribution are as follows:

n*p >= 10

n*(1-p) >= 10

In this case, n = 31 and p = 0.9, so:

np = 310.9 = 27.9 >= 10

n*(1-p) = 31*0.1 = 3.1 >= 10

Condition 1 is satisfied, but condition 2 is not. Therefore, it is recommended to use a correction factor to improve the approximation.

The correction factor is given by:

[tex]\sqrt[2]{np(1-p)}[/tex]

Substituting the values, we get:

[tex]\sqrt[2]{310.90.1}[/tex]= 1.67

The corrected values for mean and standard deviation are:

mean = np = 310.9 = 27.9

standard deviation = [tex]\sqrt[2]{np(1-p)}[/tex] = 1.67

To learn more about probability:

https://brainly.com/question/11234923

#SPJ1

2.35 [5] <$2.9> For the following code: Ibu $t0,($t1) sw $t0,($t2) Assume that the register $t1 contains the address 0x10000000 and the data at address is 0x11223344. 2.35.1 [5] <$2.3, 2.9> What value is stored in 0x10000004 on a big-endian machine? 2.35.2 [5] <$2.3, 2.9> What value is stored in 0x10000004 on a little-endian machine?

Answers

The value stored in 0x10000004 on a big-endian machine is given by 0x00000011.

The word "endianness" refers to the arrangement of bytes as they are stored in computer memory. Endianness is classified as big or little depending on which value is stored first.

The "big end" (the most important item in the sequence) is put first and at the lowest storage address in a big-endian order. The "small end" (the least important item in the sequence) is put first in a little-endian order.

(1)In Big-endian Machine, first byte of multi-byte data will be stored first(at lower memory address)

Address                 Data

0x10000000            0x11

0x10000001            0x22

0x10000002            0x33

0x10000003            0x44

---------------------------------------------------------------------

lbu $t0, 0($t1)

Load unsigned byte in Register $t0 at address 0x10000000

Here byte at address 0x10000000 is 0x11

$t0 = 0x00000011

----------------------------------------------------

sw $t0, 0($t2)

Store a word(4 bytes) from Register $t0 to memory address 0x10000004

value stored in 0x10000004 is 0x00000011

--------------------------------------------------------------------------------

(2)In Little-endian Machine, last byte of multi-byte data will be stored first(at lower memory address)

Address                 Data

0x10000000            0x44

0x10000001            0x33

0x10000002            0x22

0x10000003            0x11

---------------------------------------------------------------------

lbu $t0, 0($t1)

Load unsigned byte in Register $t0 at address 0x10000000

Here byte at address 0x10000000 is 0x44

$t0 = 0x00000044

----------------------------------------------------

sw $t0, 0($t2)

Store a word(4 bytes) from Register $t0 to memory address 0x10000004

value stored in 0x10000004 is 0x00000044.

Learn more about Big-endian machine:

https://brainly.com/question/30848621

#SPJ4

LetY1,Y2,Yn denote a random sample of size n from a population whose density is given by f(y)={αyα−1θα,0≤y≤θ0,elsewhere,where α>0 is a known, fixed value, but θ is unknown. Consider the estimator ˆθ=max(Y1,Y2,...Yn).(a) Show that ˆθ is a biased estimator for θ.(b) Find a multiple of ˆθ that is an unbiased estimator of θ.(c) Derive MSE(ˆθ).

Answers

(a) θ is a biased estimator for θ.

(b) (α+1)Y/α is an unbiased estimator of θ.

(c) MSE(θ) = αθ^2/[(α+1)^2(α+2)]

(a) To show that θ is a biased estimator for θ, we need to show that E(θ) ≠ θ.

Using the definition of the maximum function, we have

P(θ ≤ y) = P(Y1 ≤ y, Y2 ≤ y, ..., Yn ≤ y) = (F(y))^n

where F(y) is the cumulative distribution function of Y.

Differentiating both sides with respect to y, we get:

f(θ) = n(F(θ))^(n-1)f(θ)

Simplifying, we get

F(θ) = (1/n)^(1/(n-1))

Using this result, we can find the expected value of θ

E(θ) = ∫₀^∞ θf(θ)dθ = ∫₀^θ θαθ^α-1dθ = αθ/(α+1)

Thus, E(θ) ≠ θ, which means that θ is a biased estimator for θ.

(b) To find a multiple of θ that is an unbiased estimator of θ, we can use the method of moments.

We know that the population mean of Y is

μ = ∫₀^θ yf(y)dy = αθ/(α+1)

The sample mean is

Y = (Y1+Y2+...+Yn)/n

Equating these two expressions and solving for θ, we get

θ = (α+1)Y/α

Thus, (α+1)Y/α is an unbiased estimator of θ.

(c) The mean squared error (MSE) of θ can be written as

MSE(θ) = E[(θ - θ)^2]

Expanding the square and using the linearity of expectation, we have

MSE(θ) = E[θ^2] - 2θE[θ] + E[θ]^2

We already know that E[θ] = αθ/(α+1).

To find E[θ^2], we can use the fact that θ = max(Y1,Y2,...Yn)

P(θ ≤ y) = P(Y1 ≤ y, Y2 ≤ y, ..., Yn ≤ y) = (F(y))^n

Differentiating both sides with respect to y, we get

f(θ) = n(F(θ))^(n-1)f(θ)

Using this result, we can find E[θ^2]

E[θ^2] = ∫₀^∞ θ^2f(θ)dθ = ∫₀^θ θ^2αθ^α-1dθ = αθ^2/(α+2)

Substituting these expressions into the MSE formula, we get

MSE(θ) = αθ^2/(α+2) - 2θ(αθ/(α+1)) + (αθ/(α+1))^2

Simplifying, we get

MSE(θ) = αθ^2/[(α+1)^2(α+2)]

Learn more about biased estimator here

brainly.com/question/30982574

#SPJ4

The area of a trapezium is 156cm2, the parallel sides are 17cm and 35cm respectively. What is the height of the trapezium​

Answers

Answer:

  6 cm

Step-by-step explanation:

You want the height of a trapezium with bases 17 cm, 35 cm and area 156 cm².

Area formula

The formula for the are of a trapezium is ...

  A = 1/2(b1 +b2)h

Filling in the given values, we have ...

  156 = 1/2(17 +35)h = 26h

  6 = h . . . . . . . . . . divide by 26

The height of the trapezium is 6 cm.

Answer:

6cm

Step-by-step explanation:

To find:-

The height of the trapezium.

Answer:-

We are here given that the area of the trapezium is 156cm² and two of the parallel sides are 17cm and 35cm .We are interested in finding out the height of the trapezium.

The area of the trapezium is given by the formula,

[tex]:\implies \sf Area =\dfrac{1}{2}\times (s_1+s_1)\times h \\[/tex]

where s1 and s2 are the || sides of the trapezium and h is the height of the trapezium.

Now on substituting the respective values in the given formula, we have;

[tex]:\implies \sf 156cm^2 =\dfrac{1}{2} (17cm+35cm)\times h \\[/tex]

[tex]:\implies \sf 156cm^2(2) = 52cm (h) \\[/tex]

[tex]:\implies \sf h =\dfrac{156(2)}{52} cm\\[/tex]

[tex]:\implies \sf \pink{ height = 6 cm }\\[/tex]

Hence the height of the trapezium is 6cm .

Other Questions
56 tuna sandwiches were sold. This was 40% of the total number of sandwiches sold. (a) Work out the total number of sandwiches sold, Suppose you have a cache of radium, which has a half-life of approximately 1590 years. How long would you have to wait for 1/7 of it to disappear?You would have to wait ___ years for 1/7 of the radium to disappear. Directions: Find the prime factors of the polynomials.1. 2a2 - 2b22. 6x2 - 6y23. 4x2 - 44. ax2 - ay25. cm2 - cn26. st2 - s7. 2x2 - 188. 2x2 - 329. 3x2 - 27y210. 18m2 - 811. 12a2 - 27b212. 63c2 - 713. x3 - 4x14. y3 - 25y15. z3 - z16. 4c3 - 49c17. 9db2 - d18. 4a3 - ab219. 4a2 - 3620. x4 - 121. 3x2+ 6x22. 4r2 - 4r - 4823. x3 - 7x2 + 10x24. 4x2 -6 x - 825. 16x2 - x2 v 4 When factoring a polynomial in the form ax2 + bx - c, where a, b, and c are positive real numbers, should the signs in the binomials be both positive, negative, or one of each? Place the events of muscle contraction in the proper order from start (receiving signal) to the end (relaxation).ACH = Acetylcholine; SR = Sarcoplasmic Reticuluma. Myosin heads pull actin filaments together with the sarcomeres and the cell shortens.b. ATP is used to detach myosin heads and move them back to position for another power stroke.c. Myosin heads bind to actin forming cross-bridges.d. Muscle relaxes when stimulation ends and the calcium is pumped back into the SR.e. The SR releases calcium into the cytoplasm.f. ACH binds to the muscle's motor endplate and produces an action potential.g. Calcium shifts troponin and tropomyosin so that binding sites on actin are exposed.h. The action potential travels to the sarcoplasmic reticulum (SR).i. Acetylcholine (ACH) is released from neuron ending in the synaptic cleft at the neuromuscular junction. What fields if natural science are present in this passage about Snows work in anesthesiology If A B C are three matric such that AB=AC such that A=C then A is The Landrum-Griffin Act appointed the U.S. Secretary of Labor to act as a watchdog of union conduct. True False Which of the following are good examples of the security level of needs in Maslow's hierarchy of needs?A. Confidence and accomplishment.B. Food and shelter.C. Friends and family.D. Safety and employment.D. Safety and employment. George is an efficient and effective manager who has a hard time managing his own moods and understanding those of his employees. This shows that he is low on _____. The table below shows how much Craig spent on ribbon at two different shops. What is the difference in the price of 300 cm of ribbon between shop A and shop B? Give your answer in pounds (). Shop A Shop B Length of ribbon 140 cm 215 cm Cost 1.68 1.72 Evaluate the following integral in cylindrical coordinates.339x202011+x2+y2dzdydx anscribed image text: Let be a random permutation of the set S={1,2,,n} . This is, a bijection of S . Denote by X the number of fixed points of (the cardinality of the set {i:(i)=i} ). What is the expected value of X ? Hint: it helps to break X into simpler random variables and use linearity of expectations. n n/2 n 1 in a collectivistic culture, people-oriented and content-oriented listening styles are valued over other styles. According to goal-setting theory, a specific goal will produce a higher level of output than a generalized goal.a. Trueb. False What is the tendency of electrons to enter orbitals of lowest energy first? A. atomic orbital B. Aufbau principle C. electron configuration D. ground state E. Pauli exclusion principle F. Heisenberg uncertainty principle Can anyone help me please ..I need it hurry within 6 hrs.please.Brainliest for the first best answer. make a coherent report about scam alert For his craft project, James bought 101010 pieces of ribbon that were each2. 1 feet2. 1 feet2, point, 1, start text, space, f, e, e, t, end text long. How many total yards of ribbon did James buy? Pension funds pay lifetime annuities to recipients. If a firm will remain in business indefinitely, the pension obligation will resemble a perpetuity. Suppose, therefore, that you are managing a pension fund with obligations to make perpetual payments of $2.8 million per year to beneficiaries. The yield to maturity on all bonds is 13.5%. If the duration of 5-year maturity bonds with coupon rates of 13.2% (paid annually) is 4 years and the duration of 20-year maturity bonds with coupon rates of 6% (paid annually) is 11 years, how much of each of these coupon bonds (in market value) will you want to hold to both fully fund and immunize your obligation? (Do not round intermediate calculations. Enter your answers in millions rounded to 1 decimal place. Omit the sign "$" in your response.) What will be the par value of your holdings in the 20-year coupon bond? (Do not round intermediate calculations. Enter your answer in millions rounded to 2 decimal places. Omit the "$" sign in your response.)