The main-group elements are the forty-four elements that occupy groups 1A-8A of the periodic table. Main-group elements are important because of their high natural abundance both in the Earth's crust and in the human body and are commercially valuable. Review the families containing main group elements. Identify all the characteristics that apply to the elements in family IA.
Answers
Answer:
The answer is a,b, and c. This is for the USA tesprep videos
Explanation:
The characteristics that apply to the elements in the family are they are highly reactive, they are shiny, soft metals and the element form +1 ions when forming compounds. Thus option a, b and c is correct.
What are main group elements?Main group elements are defined as any of the element belonging to the s and p blocks of the periodic table.
They are most abundant element in universe and on earth.
This elements and their compound are one of the most important economical elements.
They are very good conductor of heat and electricity.
Thus, the characteristics that apply to the elements in the family are they are highly reactive, they are shiny, soft metals and the element form +1 ions when forming compounds. Thus option a, b and c is correct.
To learn more about main group elements, refer to the link below:
https://brainly.com/question/5460947
#SPJ5
Related Questions
why is it hotter in the summer and colder in the winter?
Answers
Answer: During the summer, the sun's rays hit the Earth at a steep angle. ... Also, the long daylight hours allow the Earth plenty of time to reach warm temperatures. During the winter, the sun's rays hit the Earth at a shallow angle. These rays are more spread out, which minimizes the amount of energy that hits any given spot.
During the winter, the sun’s rays hit the Earth at a shallow angle. These rays are more spread out, which minimizes the amount of energy that hits any given spot. Also, the long nights and short days prevent the Earth from warming up. Thus, we have winter
Is bleach liquid starch?
Yes or No
Answers
Answer:
O it's not
Explanation:
Have a great day!
Fast pls due rn help fast pls
Answers
Answer:
Section a:
1. stratosphere
2. radio waves
3. nitrogen, oxygen
4. humidity
5. smoke, fog
Section b:
1. ozone layer
2. stratosphere
3. carbon dioxide (CO2)
4. smoke
5. tropical areas
Section c:
1. false, it is clear
Hope those help and are all correct
which describes an attribute of nonrenewable resources
Answers
Answer:
atributes of nonrenewable recources are things you cant re use after 1 use like gas
Explanation:
Answer: the answer is b. Are unlimited
Explanation:
Who thought fire was one of four elements?
O A. Aristotle
O B. Marie Curie
O C. John Dalton
O D. Robert Boyle
Answers
Answer:
D Robert Boyle
Explanation:
what is the nature of the p-o bond in phosphorus pentoxide (p2o5)?
Answers
Answer:
the nature of the bond is covalent.
covalent bonds are bonds between 2 NON-METAL elements. since phosphorus and oxygen are both non-metals, the bond formed between them is covalent.
hope this answers your question!
21. Which of the following is the best way to clean up an acid spill?
A. Wash down the acid spill with plenty of water.
B. Wipe up the acid spill with paper towel.
C. Spread sawdust on the acid spill to absorb it.
D. Neutralize the acid spill with a base; then wash it with plenty of water.
T1
Answers
If wrong then sorry
What has more particles: a mole of hydrogen or a mole of uranium?
Answers
Answer
hydrogen
Explanation:
Is a change in color when combining two substances normally a sign of a chemical change or a physical change?
Answers
Answer:
Change in colour is a chemical change.
Explanation:
Because when two substances combine chemically, they create (a) new substance(s) that have/has different molecular structures from the parent substances, thus mostly likely absorb and reflect light in different ways.
who is credited with developing the periodic table
Answers
Answer:
Dimitri mendleev and Albert something. I forgot his last name. I think ghorso. Albert ghorso.
A student is trying to classify an unidentified, solid gray material as a metal or a nonmetal. Which question will best help the student classify the material?.
Answers
The question that will best help the student to classify the material is; "is the material malleable or ductile?"
Generally, materials can be classified as metals or non metals. There are properties that are particular to metals and there are properties that are particular to nonmetals and these properties can be used to identify each one of the materials.
The question that will best help the student to classify the material is; "is the material malleable or ductile?" These metallic properties.
Learn more:
https://brainly.com/question/1659592
Missing parts;
A student is trying to classify an unidentified, solid gray material as a metal or a nonmetal. Which question will best help the student classify the material? A. Is the material malleable or ductile? B. Does the material feel hard to the touch? C. Will the material float in water? D. Does the material feel rough or smooth?
5. Scientists always develop a plan when they try to learn something about our natural world. Which
sequence correctly shows the steps scientists follow in their plan?
A. make observations, develop an idea, obtain evidence, suggest an explanation
B. obtain evidence, suggest an explanation, develop an idea, make observations
C. suggest an explanation, obtain evidence, make observations, develop an idea
D. develop an idea, suggest an explanation, obtain evidence, make observations
Answers
Boron and antimony are good elements to use as
Answers
Answer: Semiconductors
Explanation:
can somebody please help me here ? i wanna make sure of my answer..
Answers
Answer:
[Unfortunately] Answer is A
Explanation:
You should know that 'liquid' is a state of matter and aqueous means that there is water present.
-It is mentioned that barium chloride is a solution. So you can cut off the C option.
-Barium sulfate is a salt which means it's a solid, so you can cut off the D option.
We now have A and B as the only options remaining.
-Dilute sulfuric acid is definitely not a liquid because water is present. (dilute indicates that there is a greater proportion of water)
The answer should be A.
What is the source of energy in nuclear weapons?
O A. Combustion
O B. Fusion
O C. Gravity
O D. Fission
Answers
Answer:
D. Fission
Explanation:
Induced fission is used to generate nuclear power and for weapons. The products formed during fission gain kinetic energy. It is this energy that is harnessed in nuclear power stations.
Write the complete electron configuration using the diagonal rule for strontium.
Answers
How do chemists predict the shapes of molecules?
Due to the repulsion between electrons, valence electrons will be arranged as close to each other as possible.
Due to the attraction between electrons, valence electrons will be arranged as close to each other as possible.
Due to the repulsion between electrons, valence electrons will be arranged as far apart from each other as possible.
Chemists can't predict the shape of molecules, because the attractive forces between valence electrons are unpredictable.
Answers
A. Due to the repulsion between electrons, valence electrons will be arranged as close to each other as possible.
The approximate shape of a molecule can often be predicted by using what is called the valence-shell electron-pair repulsion (VSEPR) model.Electrons in bonds and in lone pairs can be thought of as a charge cloud that repels one another and stay as far apart possible, thus causing molecules to assume specific shapes.The shape of a molecule is determined by the location of the nuclei and its electrons.Therefore, the correct option is A.
Learn more:
brainly.com/question/12116076
how many structures are possible for a square planar molecule with a formula of ax3y?
Answers
Answer:
Explanation:
Depending upon the relative arrangements of XandY X a n d Y , the square planar molecule AX3Y A X 3 Y shows only the following structure: Hence, only one structure is possible for a square planar molecule with a formula of AX3Y A X 3 Y .
Do cells have atoms?
Answers
Answer:
Ye? everything is made up of atoms so sure
How much heat is required to warm 50.0 g of ice from -10.0oC to 0.00oC, melt the ice, warm the water from 0.00oC to 100.0oC, boil the water, and heat the steam to
120.0oC ?
a 209,000 J
b 199,000 J
c 1.67 x 106 J
d 152,000 J
Answers
The total heat required to convert the ice to steam is 155,000 J.
The given parameters:
Mass of the ice, m = 50 gInitial temperature of the ice, t = -10 ⁰CFinal temperature of the ice, T = 0⁰C, 100⁰C and 120⁰CSpecific heat capacity of water = 4.184 J/g⁰CHeat of fusion of ice, = 333.55 J/gHeat of vaporization, = 2,230 J/gThe heat required to raise the temperature to 0⁰C is calculated as;
[tex]Q = mc\Delta t\\\\Q_1 = 50 \times 4.184 \times (0 - (-10))\\\\Q_1 = 2092 \ J[/tex]
The heat required to melt the ice is calculated as follows;
[tex]Q_2 = mL_f\\\\Q_2 = 50 \times 333.55 \\\\Q_2 = 16,677.5 \ J[/tex]
The heat raise the temperature to 100⁰C is calculated as;
[tex]Q_3 = 50 \times 4.184 \times (100 - 0)\\\\Q_3 = 20,920 \ J[/tex]
The heat required to boil the water is calculated as follows;
[tex]Q_4 = mL_v\\\\Q_4 = 50 \times 2230\\\\4_4 = 111,500 \ J[/tex]
The heat raise the temperature to 120⁰C is calculated as;
[tex]Q_5 = 50 \times 4.184 \times (120 - 100)\\\\Q_5 = 4,184 \ J[/tex]
The total heat required is calculated as follows;
[tex]Q_t = Q_1 + Q_2 + Q_3 + Q_4 + Q _5 \\\\Q_t = 2092 + 16,677.5 + 20,920 + 111,500 + 4,184\\\\Q_t = 155,373.5 \ J\\\\Q_t \approx 155,000 \ J[/tex]
Learn more about heat capacity here: https://brainly.com/question/16559442
Why weren’t scientists initially concerned that the ocean absorbs excess carbon dioxide?
Answers
Why scientists weren’t initially concerned that the ocean absorbs excess carbon dioxide was because they saw carbon dioxide as a pollutant
What is a pollutant?Generally, A pollutant is a material found in amounts that are harmful to organisms or exceed an environmental quality standard.
In conclusion, scientists saw carbon dioxide as a major air pollutant, and the water was helping by absorbing it.
Read more about Environment
https://brainly.com/question/17413226
#SPJ2
Find the percent composition of OXYGEN in Manganese (III) nitrate, Mn(NO3)3.
Answers
Answer:
59.8%
Explanation:
First find the Mr of manganese (III) nitrate.
Mr of Mn(NO₃)₃ = 54.9 + (14 × 3) + (16 × 3 × 3) = 240.9
Since we have to find the percentage composition of oxygen, we need to find the Mr of oxygen in the compound, which is:
Mr of (O₃)₃ = (16 × 3) × 3 = 144
Now we can find percentage composition / percentage by mass of oxygen.
% composition = [tex]\frac{Mr\ of\ oxygen\ in\ compound}{Mr\ of\ compound}[/tex] × 100
% composition = [tex]\frac{144}{240.9}[/tex] × 100 = 59.776%
∴ % compostion of oxygen in maganese(III)nitrate is 59.8% (to 3 significant figures).
Find the molar mass of iron (III) nitrate, Fe(NO3)3
Answers
Answer:
Hey there are you doing are you doing I will tell you the answer
Which choice describes an organism found in the under story of a rain forest?
thick, woody vines
bacteria
very tall trees
palms and other small trees
Answers
Answer:
Palms and other small trees
The choices which describes an organism found in the under story of a rain forest are bacteria, thick and woody vines.
What is under story of a rain forest?The understory is a layer of young trees, short species of trees, shrubs, and soft-stemmed plants that lies several meters beneath the canopy's bottom. The understory differs greatly from one rainforest to the next.
The organism that is found in the under story of a rain forest is bacteria and very small plants, thick and woody vines.
Hence organism that is present in the understory are bacteria, thick and woody vines.
To know more about understory, visit the below link:
https://brainly.com/question/21469681
#SPJ2
BRAINLIEST TO FIRST RIGHT ANSWER
Use the key above to interpret the following incomplete chemical reaction.
Select the statements at apply in order to complete the model. (Choose 3)
A) The number of atoms in the products must be equal to the reactants.
B) One diatomic oxygen should be removed from the reactant side.
C) One unbonded carbon atom should be added to the product side of the equation
D) One carbon atom and two oxygen atoms are needed to balance the equation.
E) One carbon dioxide molecule should be added to the product side of the equation.
Answers
Answer:
Carbon dioxide molecule
Answer:a , d ,e
Explanation:
jusy took quiz
Which statement describes how a substance melts?(1 point) Molecules in the substance gain kinetic energy and then become less tightly bound to each other. Molecules in the substance gain kinetic energy and then become less tightly bound to each other. Molecules in the substance lose kinetic energy and then become more tightly bound to each other. Molecules in the substance lose kinetic energy and then become more tightly bound to each other. Molecules in the substance lose kinetic energy and then become less tightly bound to each other. Molecules in the substance lose kinetic energy and then become less tightly bound to each other. Molecules in the substance gain kinetic energy and then become more tightly bound to each other. Molecules in the substance gain kinetic energy and then become more tightly bound to each other.
Answers
Answer:
Molecules in the substance gain kinetic energy and then become less tightly bound to each other.
Explanation:
According to the forces of attraction , for a substance to melt molecules in the substance gain kinetic energy and then become less tightly bound to each other.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/10957144
#SPJ2
Which of the following is true of grinding during
digestion?
A. The process of grinding is a physical change
that takes place in the mouth during digestion.
B. The process of grinding is a chemical change
that takes place in the mouth during digestion.
C. The process of grinding is a physical change
that takes place in the small intestine during
digestion
D. The process of grinding is a chemical change
that takes place in the small intestine during
digestion
Answers
The process of grinding is a physical change that takes place in the mouth during digestion.
GRINDING:Grinding is one of the processes that occur during the digestion of food molecules into simpler substances.
Grinding of food molecules occurs in the mouth with the aid of the teeth, which is used to chew.
However, the process of grinding is a physical change because it does not result into the formation of new substances or change the chemical constituents of the food.
Learn more about physical change at: https://brainly.com/question/1984022?referrer=searchResults
How many molecules of NO2 are in 0.36 moles?
Answers
Answer:
1 mol contains 6.022*10^23 molecules 0.36 moles contain 0.36 * 6.022*10^23 = 2.2 *10^23 molecules
Explanation:
Hurry. NO Spam! Write the neutralization reaction that occurs between HF and LiOH.
Answers
Answer:
HF + LiOH = LiF + H2O.
Explanation:
Hydofluoric acid is a weak acid the solution would be slightly basic due to the following equilibrium (condition in the course of a reversible chemical reaction in which no net change in the amounts of reactants and products occurs.)
Hope that helps. x
"uses for simple machines" whats a piano that needs to be moved up to a third floor apartment
Answers
Answer:
Pulley
Explanation:
You can't the piano up the stairs, you need to something to bring it up