Answer:
t = 0.196 s
Explanation:
The speed of a pulse is determined by the characteristics of the medium, its density and its resistance to stress, as long as these remain the speed will be constant for which we can use the kinetic expressions of the uniform movement
v = x / t
t = x / v
calculate
t = 2/102
t = 0.196 s
A small block with mass 0.0425 kg slides in a vertical circle of radius 0.525 m on the inside of a circular track. During one of the revolutions of the block, when the block is at the bottom of its path, point A, the magnitude of the normal force exerted on the block by the track has magnitude 4.05 N. In this same revolution, when the block reaches the top of its path, point B, the magnitude of the normal force exerted on the block has magnitude 0.660 N.
Required:
How much work was done on the block by friction during the motion of the block from point A to point B?
Answer:
[tex]W=-0.501075J \approx -0.5J[/tex]
Explanation:
From the question we are told that
Mass of block [tex]M=0.425kg[/tex]
Radius of circle [tex]r=0.525m[/tex]
Force of track [tex]F_t=4.05N[/tex]
Normal Force on block[tex]F_n=0.660[/tex]
Generally the equation for Velocity of block is mathematically Given by the law of conservation of energy
[tex]4.05=(0.425kg*9.8)+(0.425kg*v^2)/0.525[/tex]
[tex]v=\sqrt{\frac{0.525*(4.05-(0.0425*9.8)}{0.0425} }[/tex]
[tex]V=-6.69 \approx 7m/s[/tex]
For initial velocity
0.660 = 0.0425 x u^2/0.525 - 0.0425 x 9.8
[tex]v=\sqrt{0.525*\frac{(0.660+(0.0425*9.8)}{0.0425} }[/tex]
[tex]V=-3.646 \approx 4m/s[/tex]
Generally the equation for work done is mathematically Given by
[tex]Wf=(0.5mu^2 - 0.5mv^2) -mg(2R)[/tex]
[tex]Wf=(0.5(0.0425)(4) - 0.5(0.0425)(7) -(0.0425)(9.8)(2*0.525)[/tex]
[tex]W=-0.501075J \approx -0.5J[/tex]
A small mass is released from rest at a very great distance from a larger stationary mass. Draw a graphs best represents the gravitational potential energy U of the system of the two masses as a function of time T.
Answer:
attached below
Explanation:
Gravitational potential
energy = [tex]- \frac{GmM}{r}[/tex] ,
V ∝ [tex]- \frac{1}{r}[/tex]
attached below is a graph that represents the gravitational potential energy U
Gravitational potential energy is the energy held in an entity as a result of its vertical position or length. This gravitational pull of a planet on an object causes the information to be stored.
This is connected with gravitational pull since it takes work to lift anything against the gravity of the Earth.
Freshwater in a raised lake or kept behind a dam demonstrates gravitational force.
According to the formula:
Gravitational potential energy [tex]\bold{=-\frac{GMm}{r^2}}[/tex]
Therefore
[tex]\to \bold{V \propto -\frac{1}{r}}[/tex]
Therefore, the answer is "Option d"
Learn more about the Gravitational potential :
brainly.com/question/17001724
Please help! Will give a lot of points
what do you already know about asexual and sexual reproduction?
Answer:
Explanation:
Sexual reproduction is when a male and female have sexual inter course an and produce sex cells. A males sex cell is the sperm and the Females sex cell is the ova or egg cells.
the amount of power exerted by a machine that applies a force of 550 N over a distance of 10 m in a time of 5 seconds
Answer:
The meaning of work is a force that acts on an object and the object moves in respond and the meaning of power is how much work is done in a given amount of time. The two terms are related by is that power is the rate of doing work.
Explanation:
Mass is:
A.how much an object weighs
B.everything around you
C.how much matter is in an object
D.the state of matter such a as solid liquid or gas
Answer:
C-How much matter is in an object
Explanation:
An object moves with a positive acceleration. Could the object be moving with increasing speed, decreasing speed or constant speed
Answer:
Increasing speed.
Explanation:
In physics, acceleration can be defined as the rate of change of the velocity of an object with respect to time.
This simply means that, acceleration is given by the subtraction of initial velocity from the final velocity all over time.
Hence, if we subtract the initial velocity from the final velocity and divide that by the time, we can calculate an object’s acceleration.
Mathematically, acceleration is given by the equation;
[tex]Acceleration (a) = \frac{final \; velocity - initial \; velocity}{time}[/tex]
In this scenario, an object moves with a positive acceleration. Thus, the object is moving with an increasing speed and as such it has acceleration in the same direction as its velocity with respect to time.
prove principle of conversation of linear momentum in accordance to principle of classical relativity
Answer:
Cuz im batman hahahhahah
Determine the maximum velocity and maximum acceleration of a particle which moves in simple harmonic motion with an amplitude of 0.2 in and a period of 0.1 s.
Answer:
The maximum velocity and maximum acceleration of the particle are approximately 12.566 inches per second and 789.568 inches per square second.
Explanation:
The equation of motion for the position of a particle experimentating a simple harmonic motion ([tex]x(t)[/tex]), measured in inches, is described by the following expression:
[tex]x(t) = A\cdot \cos \left(\frac{2\pi\cdot t}{T} +\phi\right)[/tex] (1)
Where:
[tex]A[/tex] - Amplitude, measured in inches.
[tex]t[/tex] - Time, measured in seconds.
[tex]T[/tex] - Period, measured in seconds.
[tex]\phi[/tex] - Phase, measured in radians.
Then, we obtain the formulas for the velocity and acceleration of the particle by differentiating (1):
[tex]v(t) = -\frac{2\pi\cdot A}{T}\cdot \sin \left(\frac{2\pi\cdot t}{T}+\phi \right)[/tex] (2)
[tex]a(t) = -\left(\frac{2\pi}{T} \right)^{2}\cdot A\cdot \cos \left(\frac{2\pi\cdot t}{T}+\phi \right)[/tex] (3)
From (2) and (3) we find that maximum velocity ([tex]v_{max}[/tex]), measured in inches per second, and maximum acceleration ([tex]a_{max}[/tex]), measured in inches per square second, are defined by the following formulas:
[tex]v_{max} = \frac{2\pi\cdot A}{T}[/tex] (4)
[tex]a_{max} = \left(\frac{2\pi}{T} \right)^{2}\cdot A[/tex] (5)
If we know that [tex]A = 0.2\,in[/tex] and [tex]T = 0.1\,s[/tex], then the maximum velocity and maximum acceleration of the particle are, respectively:
[tex]v_{max} = \frac{2\pi\cdot (0.2\,in)}{0.1\,s}[/tex]
[tex]v_{max} \approx 12.566\,\frac{in}{s}[/tex]
[tex]a_{max} = \left(\frac{2\pi}{0.1\,s} \right)^{2}\cdot (0.2\,in)[/tex]
[tex]a_{max} \approx 789.568\,\frac{in}{s^{2}}[/tex]
The maximum velocity and maximum acceleration of the particle are approximately 12.566 inches per second and 789.568 inches per square second.
When an object executes a to and fro motion is said to be a simple harmonic motion. The maximum velocity and maximum acceleration of the particle will be 12.566 in/s and 789.568 in/s².
What is simple harmonic motion?When an object executes a to and fro motion in the definite plane when it is tied with the string. The type of motion will be the simple harmonic motion.
Simple harmonic motion is a form of periodic motion in mechanics and physics in which the restoring force on the moving item is directly proportional to the size of the object.
The value of maximum velocity is given by the formula in the SHM motion is
[tex]\rm V_{max = \frac{2\pi A}{T}[/tex]
[tex]\rm V_{max} = \frac{2\times 3.14 \times 0.2 }{0.1}[/tex]
[tex]\rm V_{max = 12.566 \;in/sec[/tex]
The value of maximum acceleration is given by the formula in the SHM motion is
[tex]\rm a_{max}=(\frac{2\pi}{T} )^2.A\\\\ \rm a_{max}=(\frac{2\times 3.14 }{0.1} )^2 \times 0.2 \\\\ \rm a_{max}=789.568\; in/sec^2[/tex]
Hence the maximum velocity and maximum acceleration of the particle will be 12.566 in/s and 789.568 in/s²
To learn more about the simple harmonic motion refer to thr link;
https://brainly.com/question/17315536
Match each term with the appropriate definition
Answer:
opaque = 4
malleable = 3
ductile = 2
lustrous (or whatever the bottom word is) = 1
Explanation:
What percentage of the acceleration at Earth's surface is the acceleration due to gravity at the position of a satellite located 489 km above Earth
Answer:
Explanation:
The formula for variation in the value of g due to height h is given by the following relation .
g₁ = g₀ ( 1 - h / R )
g₁ and g₀ are value of acceleration due to gravity at height h from surface and at surface and R is radius of the earth .
R = 6370 km , h = 489 km ( given )
g₁ = g₀ ( 1 - 489 / 6370 )
= .923 g₀
g₁ in percent terms = .923 x 100
= 92.3 % .
George burnt his fingertips so badly that he can't feel anything with them anymore.
Which part of his skin must have been damaged?
O papillary layer
Hypodermis
hyperdemis
subcutaneous layer
George burnt his fingertips so badly that he can't feel anything with them anymore, then the papillary layer part of his skin must have been damaged, therefore the correct answer is option A.
What is thermal energy?It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy.
As given in the problem George burnt his fingertips so badly that he can't feel anything with them anymore.
Option A is the appropriate response since George must have injured the papillary layer of his skin if his fingertips were burned so badly that he can no longer feel anything with them.
Learn more about thermal energy here, refer to the link given below ;
brainly.com/question/3022807
#SPJ2
NEED Answer asap plz!!
Answer:
I think a is the right not clear but
Sam is driving along the highway towards Savannah. He travels 150 m in 3 seconds. What is his speed
Answer:
50m/s
Explanation:
Speed = distance/ time
Distance = 150m
Time = 3 secs
Therefore Speed =150/3
Speed = 50 m/s
A 105 kg football player runs at 8.5 m/s and plows into the back of an 85 kg referee running at 3.5 m/s on the field causing the referee to fly forward at 6.0 m/s.
What must the momentum of the football player be after the collision?
Answer:
680 Kg.m/s
Explanation:
Mass of player; m_p = 105 kg.
Speed of player before Collision; v_pi = 8.5 m/s
Mass of referee; m_r = 85 kg
Speed of referee before collision; v_ri = 3.5 m/s
Speed of referee after collision; v_rf = 6 m/s
From conservation of momentum,
Initial momentum = final momentum
Thus;
(m_p × v_pi) + (m_r × v_ri) = (m_p × v_pf) + (m_r × v_rf)
Where (m_p × v_pf) is the momentum of the player after collision.
Thus, Plugging in the relevant values, we have;
(105 × 8.5) + (85 × 3.5) = (m_p × v_pf) + (85 × 6)
(m_p × v_pf) = (105 × 8.5) + (85 × 3.5) - (85 × 6)
(m_p × v_pf) = 680 Kg.m/s
During an automobile crash test, the average force exerted by a solid wall on a 1,700 kg car that hits the wall is measured to be 170,000 N over a 0.14 s time interval. What was the initial speed of the car (in m/s) prior to the collision, assuming the car is at rest at the end of the time interval
Answer:
14 m/s
Explanation:
Step One:
Given data:
mass of automobile m= 1700kg
Force F= 170,000 N
time t= 0.14s
v= ??
Required
The velocity of the car
Step two:
From the expression given below, we can find the velocity
Ft= mv
make v subject of the formula
v= Ft/m
v= 170000*0.14/1700
v=23800/1700
v=14 m/s
How many years does it take for the number of americium-241 nuclei to decrease
from 10 000 to 5000?
Time =
years=
Answer:
432 years
Explanation:
the half life of americium-241 is approx. 432 years, and the half life means the time it takes for half of the atoms to decay. hope this helps!
how do you use vectors daily without realizing it was a vector?
I need help ASAP !!!
Explanation:
Vectors are quantities that has both magnitude and direction. A vector is described in terms of quantity and the direction it is headed.
There are different forms of vectors that are used in our daily life.
When we describe the motion of a car and the direction it is heading, we are simply talking about its velocity which is a vector. When we say James treks 2km from his school to the house everyday, we are simply describing his displacement. When we apply a force to push the table from one corner of the room to another point, is simply a vector When we change position, it is a vector application.If California experienced drought, which system would be responsible for it and WHY?
Answer:
California has one of the most variable climates of any U.S state, and often experiences very wet years followed by extremely dry ones . The state's reservoirs have insufficient capacity to balance the water supply between wet and dry years
Explanation:
PLEASE MARK ME AS BRAINLIEST
Convert 41.3 kilocalories into joules.
Explanation:
41.3 kilocalories = 172 799.2 joules
[tex]hope \: it \: will \: help[/tex]
An electric heater is 90% efficient. How much useful energy is produced from 8000 J?
Answer:
7200J
Explanation:
you have to find 90 percent of 8000 J to find total efficiency
A 1250-kg car moves at 20.0 m/s. How much work must be done on the car to increase its speed to 30.0 m/s.
Answer:
312,497.5Joules
Explanation:
Work done = force × distance
W = FS
Get the force
F = ma
F = 1250×9.8
F = 12250N
Get the distances using the equation of motion
v² = u² +2gS
30² =20²+2(9.8)S
900 =400+19.6S
900-400 =19.6S
500 = 19.6S
S = 500/19.6
S = 25.51m
Get the work done
Work done = 12250×25.51
Workdone = 312,497.5Joules
Answer:
3.13 x 10^5 J
Explanation:
The work done increases the car's kinetic energy so that its new speed is 30 m/s. So, we set t, the net work required to increase the car's speed equal to the change in the car's kinetic energy.
Wnet = △K = Kf - Ki = 1/2mvf^2 - 1/2mvi^2 = 1/2m(vf^2-vi^2) = 1/2(1250kg)((30m/s)^2 - (20m/s)^2) = 3.13x10^5 J
In a chemical reaction, the mass of the reactants is 13,3 grams. Which of the
following could represent the mass of the products?
Answer:
my assuytyyhyyyyyy gftdrrdtiifyb tvhyvth rv b yy
What is calibration of thermometer?
Answer:
HACCP based food safety programs require accurate record keeping to be successful. Temperature is often the parameter of interest when monitoring a critical control point (CCP). ... To be considered accurate, a thermometer must be calibrated to measure within +/- 2° F (1.1° C) of the actual temperature.
Explanation:
g Observer A, who is at rest in the laboratory, is studying a particle that is moving through the laboratory at a speed of 0.624c and determines its lifetime to be 159 ns. (a) Observer A places markers in the laboratory at the locations where the particle is produced and where it decays. How far apart are those markers in the laboratory
Answer:
[tex]D=29.7648m[/tex]
Explanation:
From the question we are told that
Speed of the particle[tex]V=0.624c[/tex]
Lifetime [tex]t=159ns[/tex]
Generally the equation for distance is mathematically given by
[tex]D=Vt[/tex]
[tex]D=0.624c*159*10^-^9[/tex]
[tex]D=0.624*3*10^8*159*10^-^9[/tex]
[tex]D=29.7648m[/tex]
Therefore the markers are [tex]D=29.7648m[/tex] apart
A speedboat moving at 29.0 m/s approaches a no-wake buoy marker 100 m ahead. The pilot slows the boat with a constant acceleration of -3.4 m/s2 by reducing the throttle. (a) How long does it take the boat to reach the buoy
Answer:
[tex]t =4.8sec[/tex]
Explanation:
From the question we are told that
Velocity of speed boat [tex]V=29.0m/s[/tex]
Distance to Marker [tex]d=100[/tex]
Acceleration of [tex]a=-3.4m/s^2[/tex]
Generally the Newtons 3rd motion equation is given as
[tex]v^2 = u^2 + 2 * a* s[/tex]
[tex]v^2 = 29^2 + 2 * -3.4* 100[/tex]
[tex]v = \sqrt{161}[/tex]
[tex]v=12.68m/s[/tex]
Generally the Newton's first equation of motion is given as
[tex]v = u + a*t[/tex]
[tex]12.68 = 29 -3.4*t[/tex]
[tex]12.68-29 = -3.4t[/tex]
[tex]-16.32 = -3.4t[/tex]
[tex]t =\frac{-16.32}{-3.4}[/tex]
[tex]t =4.8sec[/tex] .
True or False: The speed of an object changes if the net work done on it is zero.
Answer:
false
Explanation:
If the net work done on an object is zero, it follows that its change in kinetic energy is also zero. Therefore, its speed remains the same.
I think the answer is false
An electron traverses a vacuum tube with a length of 2 m in 2 X 10- 4
sec. What is the average speed of the
electron during this time?
Answer:
Average speed = 10,000 m/s
Explanation:
Given the following data;
Distance = 2m
Time = 0.0002secs
To find the average speed;
Average speed = distance/time
Average speed = 2/0.0002
Average speed = 10,000 m/s
Therefore, the average speed of the
electron is 10,000 meters per seconds.
What does the law of conservation of energy state? *
1. Total energy before transfer is equal to total energy after transfer
2. Total energy before transfer is less than total energy after transfer
3. Total energy before transfer is more than total energy after transfer
Answer:
total energy before transfer is equal to total energy after transfer
Answer:
1 is the correct one Answer
Which term is the product of force and distance? power work net force acceleration please help
Answer: WORK
Explanation:
Answer:
work
Explanation:
got it right on edge:p