Answer:
0.2 I took the test
Explanation:
I took the test
The time period of the whole wave cycle is 6 seconds but the time period of one complete wave is about 4 seconds here. The inverse of this time period is the frequency, that is 0.2 Hz.
What is frequency ?Frequency by definition is the number of events per unit time. Frequency of a wave is the number of wave cycles in one second. It is the inverse of the time period.
Frequency is directly related to the energy of the wave. As the frequency increases, energy of the wave also increases. In the given graph the wave cycle is given for a time of 6 seconds.
The time period for one complete wave is 4 second from the graph.
thus, T = 4 s
v = 1/T
= 1/4 = 0.2 s⁻¹ or 0.2 Hz
Therefore, the frequency of the wave shown, is 0.2 Hz.
Find more on frequency:
https://brainly.com/question/14316711
#SPJ5
How much work did he do if he traveled 20 meters?
A 55 kg boy is riding a skateboard at a speed of 1.0 m/s. What is his
kinetic energy?
Answer:
27.5
Explanation:
KE=1/2m(v)^2
the driver of the bus brought the students to the playground and returned to the garage on the same road when the bus engine was doing more work: A when the students were driving: B when they returned to the garage, explain why
Answer: A driver must not drive a vehicle at such a slow speed ... When driving under adverse weather, road or traffic ... before the school bus stops to pick up or let off students
Explanation:
hope this helps :)
In order to increase the final momentum of a golf ball, we could
a) follow through when hitting the ball
b) increase the force acting on it
c) increase the time of contact with the ball
d) swing as hard as possible
f) All of the above
Answer:
option f) all of the above
We will see that all of the given options would increase the momentum, so the correct option is f "all of the above"
How to increase the momentum?
Momentum is defined as the amount of motion, and it is given by:
P = m*v
Where m is the mass of the object and v is the velocity.
We can't change the mass of the golf ball, but we can change the velocity, and to do it, we need to increase the acceleration that we apply to the ball.
To increase the acceleration we can:
follow through when hitting the ball (the force is applied for more time, so the acceleration is larger).increase the force acting on it (it directly increases the acceleration).increase the time of contact with the ball (similar to the first option).swing as hard as possible (similar to the second option).Then all the options are correct, which means that the correct option is f.
If you want to learn more about momentum:
https://brainly.com/question/7538238
#SPJ2
An ohm is best described as a unit of measure for...
A. electrical resistance
B. electrical current
C. electrical potential difference
D. magnetic field strength
What is the limiting factor of speed for an object falling through the air?
⭐Air Resistance is the factor, which limits the speed of an object falling through the air...⭐
____________________________________________________
<Judge It Yourself...>
Hope it helps you! ヅ
✪ Be Brainly ✪
A washing machine spin dries clothes. It starts spinning at 20 rad/s and slows down to 8 rad/s while turning through 500 revolutions.
a. What is the angular acceleration?
b. How much time does it take to slow down?
Answer:
i do not know man
Explanation:
lol
The angular acceleration of the washing machine spin is 53.5 x 10⁻³.
What is meant by angular acceleration ?Angular acceleration is defined as the time rate of change of angular velocity in a circular motion.
Here,
Initial angular velocity, ω₁ = 20 rad/s
Final angular velocity, ω₂ = 8 rad/s
Angular displacement, θ = 2[tex]\pi[/tex] x no. of revolutions
θ = 2[tex]\pi[/tex] x 500 = 1000[tex]\pi[/tex]
a) Using the equation of circular motion,
ω₂² - ω₁² = 2αθ
Therefore, the angular acceleration,
α = (ω₂² - ω₁²)/2θ
α = (20² - 8²)/2 x 1000[tex]\pi[/tex]
α = 53.5 x 10⁻³ rad/s²
b) Time taken by the machine spin to slow down,
t = (ω₂ - ω₁)/α
t = (20 - 8)/53.5 x 10⁻³
t = 224.2 s
Hence,
a) The angular acceleration of the washing machine spin is 53.5 x 10⁻³.
b) Time taken by the washing machine spin to slow down is 224.2 s.
To learn more about angular acceleration, click:
https://brainly.com/question/30237820
#SPJ3
is a rare disorder that includes the inability to feel pain.
A. Somatoform pain disorder
B. Congenital analgesia
C. Kinesthesis
D. Anesthesia
Please select the best answer from the choices provided
Ο Ο Ο
B.
D
The rare disorder that includes the inability to feel pain is called Congenital analgesia. That is option B.
What is Congenital analgesia?Congenital analgesia is defined as ,the name implies, a genetic disorder that rarely occurs which makes one not to be able to feel pain.
It is an autosomal recessive disorder in which there is genetic changes in the PMRD12 gene.
Therefore, the rare disorder that includes the inability to feel pain is called Congenital analgesia.
Learn more about pain here:
https://brainly.com/question/25753221
#SPJ1
A mass sitting on a horizontal, frictional surface is attached to one end of a spring; the other end is fixed to a wall. 3.0 J of
work is required to compress the spring by 0.20 m. If the mass is released from rest with the spring compressed, it
compresses a maximum acceleration of 15 m/s?.
a) Determine the spring constant.
b) Determine the mass.
d) What is the velocity when the mass reaches maximum acceleration?
c) Deterinine the net force when the mass passes 0.10m compression
d) Determine the acceleration when the mass passes 0.10m compression.
e) Determine the velocity when the mass passes 0.10m compression
Answer:
I started answering this before everything was erases, but briefly
W = 1/2 K x^2 so K = 2 W / x^2 = 6 * 25 = 150
Also F = - K X = 150 * 1/5 = 30 N at max extension
m = F / a = 30 /15 = 2 kg
Since max extension occurs at t = 0 you can write
x = A sin ω t
v = ω A cos ω t
a = -ω^2 A sin ω t note that there is no phase angle here
Also at .1 compression
.1 = .2 sin ω t and sin ω t = 1/2 and ω t = 30 deg = pi / 6
Substiture these values above to get velocity and acceleration when
ω t = 30 deg
Why does the first row in our periodic table
only have two elements?
A) because each orbital in every sub-level only holds
two electrons
B) because Bohr only knew about two elements
C) because the first energy level only holds two
electrons total
Help me plssss
Answer:
B
Explanation:
♡ ∩_∩
（„• ֊ •„)♡
┏━∪∪━━━━┓
Hopes this helps
♡ good luck 。 ♡
┗━━━━━━━┛
Answer:
C option is correct
Explanation:
C) because the first energy level only holds two electrons.
difference between sold and liquid
Explanation:
Solids have closely packed particles and vibrate about a fixed position, they also have a fixed volume.
liquid have close particles but which are able to move with a bit of kinetic energy, for this reason they have no fixed volume but take the volume of the container or vessel
The Berlin marathon is one of the fastest marathons courses; many world records have been set there. In 2014 Dennis Kimetto ran the 42.195 km in 2 hours, 2 minutes and 5 seconds. what was his average speed?
Answer:
about 2000 klm per min
Explanation:
what is Schwartzchild radius??
no copied answers plz
Answer:
Schwarzschild radius is the radius of the boundary of a hole of this type.
Why sound waves are called mechanical waves
Answer:
Because they travel by interacting within other particles.
Explanation:
Sound cannot travel in a vacuum, sound waves need to interact with other particles in order to be carried and this makes sound waves a mechanical wave.
rock at the edge of a cliff has kinetic energy because of its position.
True
False
its false rock is at edge
Think of one obstacle that you know YOU CAN, YOU WILL, & YOU MUST overcome.
Answer:
myself tbh
Explanation:
hope this helps
Answer: Depression and myself, love life
Hope this helps have a awesome day❤️✨Explanation:
HELP PLEASE
44. Two wave pulses are traveling along a string
toward each other as represented in the diagram
below.
(D is interference)
The phenomenon of interference occurs when two wave pulses are traveling along a string toward each other. Option D is correct.
What is the interference of waves?The result of two or more wave trains flowing in opposite directions on a crossing or coinciding pathways. This phenomenon is known as the interference of waves.
The effect is the sum of the individual wave amplitudes at each site where more than one wave is present.
When two wave pulses are traveling along a string toward each other. They meet and the phenomenon is occur known as interference.
Hence the phenomenon of interference occurs when two wave pulses are traveling along a string toward each other.
To learn more about the interference of waves refer to the link;
https://brainly.com/question/16098226
A weight-lifter raises a 2000 N weight through a vertical height of 2.0m in 0.80 s.
What useful power does he develop in doing this?
A
800 W
B
3200W
с
4000 W
D
5000W
Answer:
D. 5000W
Explanation:
Given the following data;
Force = 2000N
Distance = 2m
Time = 0.8s
To find the power;
First of all, we would determine the workdone by the weightlifter
Workdone = force * distance
Workdone = 2000 * 2
Workdone = 4000N
Now, we can find the power using the formula;
Power = workdone/time
Substituting into the equation, we have
Power = 4000/0.8
Power = 5000 Watts
Skyscrapers are made of concrete and glass, concrete and glass are made of sand,so that makes skyscrapers giant sandcastles. Change my mind
Awnswer:
what are the answer chosices
Explanation:
Help me on this question
Car A is stopped at a traffic light. At the moment it starts to move again, it is situated 330 m from car B, which is traveling in the opposite direction at a constant velocity of 18.0 m/s. If car A accelerates at a rate of 3.0 m/s^2, where and after how long will the two cars pass each
other?
Please answer this question with steps..
Answer:
hopr
Explanation:
Answer:
How do u delete your questions on this app
There is a small hole of radius r in a hollow sphere, which is immersed in a liquid. Upto what maximum depth it can be immersed so that liquid may not enter in it? Density of liquid is d and surface tension is T.
Answer:
h = 4T/dgr
Explanation:
Using Laplace law for spherical bubble, the pressure difference P'- P = 4T/r where T = surface tension and r = radius of sphere.
Now, the pressure difference on the hollow sphere P' - P = dgh where d = density of liquid, g = acceleration due to gravity and h = maximum depth to which sphere must be immersed.
So dgh = 4T/r
h = 4T/dgr
pulling a 15 kg mass from a bucket from a depth of 6 meters well a man shook 20 sec what was his power
Answer:
power=44.1 watts
Hope it helped
PLS mark BRAINLIEST
how can understanding velocity help to prevent a mid-air collision
Answer:
To maintain enough time to prevent a collision, a system operating in air traffic where aircraft speed does not
fall below 100 km/h (most medium-sized UAVs and GA aircraft) will need to be able to detect obstacles which
subtend an arc-width of as small as 0.125 mra
From an apple tree 2 metres high, a 100g mass apple fell of the tree, what work did it do?
Answer:
When an apple falls from the tree to the ground, its energy of position (stored as gravitational potential energy) is converted to kinetic energy, the energy of motion, as it falls. When the apple hits the ground, kinetic energy is transformed into heat energy.
Elements with positive valences usually ______ electrons
A. Donate
B. Accept
C. Have no
D. Create
A box of mass 5.0 kg is initially at rest. A 500 N force causes it to move horizontally through a
distance of 12.00 m. How much work would there be?
Answer:
Workdone = 6000Nm
Explanation:
Given the following data;
Mass = 5kg
Force = 500N
Distance = 12m
To find the work done;
Workdone = force * distance
Workdone = 500 * 12
Workdone = 6000Nm
A rocket sled accelerates forward from 10 m/s to 50 m/s in 2 seconds. What is the acceleration of the sled?
Answer:
Explanation:
Use kinematics equations
You have Vi=10m/s and Vf=50m/s and t=2s
Use equation Vf=Vo+at 50=10+a(2)
50=10+2a
40=2a
a=20 m/s^2
A book is sitting on a table. Which of the following is true about the table? O A. It is pushing up on the book. O B. It exerts no force on the book at all. O C. It is pulling down on the book. D. It can affect the mass of the book.
Answer:
yes it does exert a force, it pushes it up
Explanation:
this is called normal force
if it didn't exert a force the book would keep going down
according to newton every force has an equal amd opposite reaction
so the book exerts a force on the table and vice versa
hope this helped
Which of the following describes a change in energy that occurs as an acorn falls from a tree toward the ground
As an acorn falls from a tree toward the ground, gravitational potential energy is converted into kinetic energy.
To find the correct option among all the options, we need to know about the conversation of energy.
How are the gravitational potential energy and kinetic energy defined near the earth surface?Near the earth surface, the gravitational potential energy is given as mass×g×height from the earth surface.Kinetic energy is given as 1/2×mass×velocity².How are the gravitational potential energy and kinetic energy converted when acorn falls from a tree?When an acorn is going to fall, it is at maximum height of its journey, so it has maximum gravitational potential energy.Also, at that time, its kinetic energy is zero as it's at rest.But when it moves down, its potential energy decreases as the height decreases and kinetic energy increases due to increasing velocity. So that its total mechanical energy is conserved.Thus, we can conclude that option (d) is correct.
Learn more about the conversation of gravitational potential energy to kinetic energy here:
brainly.com/question/11333389
#SPJ2