The graph of a linear function passes through the two given points on the coordinate plane.

Answers

Answer 1

The slope of the given linear equation is 3.

The rate of change of a linear function is equal to its slope.

To find the slope of the function passing through the points (5, 12) and (8, 21), we can use the slope formula:

slope = (y - y') / (x - x')

where (x', y') = (5, 12) and (x, y) = (8, 21).

Substituting these values into the formula, we get:

slope = (21 - 12) / (8 - 5)

slope = 9 / 3

slope = 3

Therefore, the rate of change of the linear function is 3.

Learn more about Linear equations here:

https://brainly.com/question/11897796

#SPJ1

Complete question:

The graph of a linear function passes through the two given points on the coordinate plane.

(5,12)

(8,21)

What is the rate of change of the function?


Related Questions

You number each subject in the population. Then place numbered cards in a bowl, mix them thoroughly, and select as many cards as needed. This is an example of which sampling method? 答案选项组 Random Sampling Stratified Sampling Cluster Sampling Systematic Sampling

Answers

The described sampling method is an example of random sampling.

The sampling method described in the question is known as simple random sampling, which is a common method of selecting a representative sample from a population.

In this method, each member of the population is assigned a unique number, and a certain number of individuals are selected randomly from the population.

Simple random sampling is a type of probability sampling, which means that each member of the population has an equal chance of being selected for the sample.

This is important because it ensures that the sample is representative of the population as a whole, and reduces the risk of sampling bias.

The process of simple random sampling is straightforward and easy to implement, making it a popular choice for researchers. However, it can be time-consuming and may not be practical for very large populations. In such cases, other sampling methods such as stratified sampling or cluster sampling may be more appropriate.

Overall, simple random sampling is a reliable and effective method of selecting a representative sample from a population, and is widely used in research studies and surveys.

For similar question on probability.

https://brainly.com/question/29155013

#SPJ11

Whenever the elements of the fire triangle are present in an area, there is an increased risk of fire. Where are all three elements present

Answers

The three elements of the fire triangle are heat, fuel, and oxygen.

All three elements are present in various locations such as kitchens, factories, workshops, and even in nature such as forests and grasslands. For example, in a kitchen, the stove provides heat, cooking oil or gas is the fuel, and air provides oxygen.

In a factory, welding machines generate heat, combustible materials serve as fuel, and air provides oxygen. In a forest, the hot summer sun provides heat, dry leaves and branches serve as fuel, and air provides oxygen. Whenever all three elements are present, there is an increased risk of fire, and proper precautions should be taken to prevent fires from starting.

For example, if there is a dry and combustible material (fuel) that is exposed to a high temperature or a spark (heat), and there is an ample supply of oxygen in the air, then all three elements of the fire triangle are present and a fire can start. Another example might be a gas stove with an open flame (heat), a can of flammable cooking oil (fuel), and a well-ventilated kitchen (oxygen).

When these three elements are present together, there is an increased risk of fire.

To know more about "Elements" refer here:

https://brainly.com/question/18949593#

#SPJ11

im being nice
what is 4x2
be my friend pls

Answers

Answer: 8

Step-by-step explanation: you multiply 4 times 2 and get 8 basic math

The parameter ______ represents the proportion of successes in a population and the statistic ______ represents the proportion of successes in a sample.

Answers

The statistic p-hat and the parameter p indicate the proportion of successes in a sample and the population, respectively.

Two typical metrics are the population mean and standard deviation. Greek letters, such as (mu) for the mean and (sigma) for the standard deviation, are frequently used in statistics to denote population parameters.

P′ is equal to x / n, where x is the total number of successes and n is the sample size. As a point estimate for the genuine population percentage, the variable p′ represents the sample proportion. P is a parameter that describes a population-related percentage number. For instance, according to the 2010 United States Census, 83.7% of Americans were not classified as Hispanic or Latino.

[tex]p=xn_p = x_n[/tex]

Learn more about sample visit: brainly.com/question/24466382

#SPJ4

Mavis wants to move each counter to an adjacent square (horizontally or vertically, but not diagonally), so that as originally, each square contains exactly one counter. In how many ways can she do this

Answers

Thus, there are over 2 trillion ways for Mavis to move each counter to an adjacent square without having any of them end up in the same square.

There are several ways Mavis can move each counter to an adjacent square, but the question is how many ways can she do this without having two counters end up in the same square.

First, let's consider the top row of the board. There are 7 counters, and each counter has two adjacent squares that it can move to.

However, the counter on each end only has one adjacent square to move to. So, the total number of ways to move the counters in the top row without any of them ending up in the same square is:

2 x 2 x 2 x 2 x 2 x 2 x 1 = 64

Now, let's consider the second row. There are also 7 counters in this row, but the two end counters now have two adjacent squares to move to.

However, there is a new constraint: each counter in the second row must move to a square that is not occupied by a counter in the top row.

This means that the first and last counters in the second row each have three possible squares to move to, while the other five counters each have two possible squares to move to.

So, the total number of ways to move the counters in the second row without any of them ending up in the same square is:

3 x 2 x 2 x 2 x 2 x 2 x 3 = 288

We can continue this process for each row, taking into account the constraints of not having any counters end up in the same square and not moving to squares already occupied in the previous row.

In the end, the total number of ways Mavis can move the counters to adjacent squares is the product of the number of ways for each row:

64 x 288 x 288 x 288 x 288 x 288 x 64 = 2,051,717,760,000

So, there are over 2 trillion ways for Mavis to move each counter to an adjacent square without having any of them end up in the same square.

Know more about the square

https://brainly.com/question/25092270

#SPJ11

Evaluate the solution at the specified value of the independent variable. When t = 0, N = 150, and when t = 1, N = 300. What is the value of N when t = 4?

Answers

The value of N when t=4 is: N = 300 + 450 = 750.

To evaluate the solution at the specified value of the independent variable, we need to find the relationship between N and t. Given the information, we have two points: (0, 150) and (1, 300).

Step 1: Calculate the slope (m) between the two points.
m = (N2 - N1) / (t2 - t1) = (300 - 150) / (1 - 0) = 150

Step 2: Use one of the points (e.g., (0, 150)) and the slope to find the equation N = mt + b.
150 = 150 * 0 + b
b = 150

Step 3: Write the equation with the slope and intercept.
N = 150t + 150

Step 4: Evaluate the value of N when the specified value of the independent variable t = 4.
N = 150 * 4 + 150
N = 600 + 150
N = 750

The value of N when t = 4 is 750.

to learn more about independent variable click here:

brainly.com/question/1479694

#SPJ11

PLEASE ANSWER ASPA DONT BE A SCAM
A sprinkler set in the middle of a lawn sprays in a circular pattern. The area of the lawn that gets sprayed by the sprinkler can be described by the equation (x+6)2+(y−9)2=196.

What is the greatest distance, in feet, that a person could be from the sprinkler and get sprayed by it?

14 ft

15 ft

13 ft

16 ft

Answers

The greatest distance a person could be from the sprinkler and still get sprayed by it is 28 feet, which is equal to the diameter of the circle described by the equation (x+6)²+(y−9)²=196.

In this problem, we are given an equation that describes the area covered by a sprinkler set in the middle of a lawn. Specifically, the equation (x+6)²+(y−9)²=196 represents a circle with center (-6,9).

Radius

= √196

= 14

The greatest distance that a person could be from the sprinkler and still get sprayed by it is equal to the diameter of the circle.

The diameter is simply twice the radius, which is 2 × 14 = 28 feet.

To understand why the diameter is the maximum distance a person could be from the sprinkler and still get sprayed, we can visualize the circle as the area covered by the sprinkler's spray. Any point inside the circle would be sprayed by the sprinkler, while any point outside of the circle would not. Since the diameter is the longest distance between two points on the circle, any point beyond the diameter would be outside the area covered by the sprinkler's spray.

To know more about diameter here

https://brainly.com/question/22516483

#SPJ1

The manager of a grocery store took a random sample of 100 customers. The avg. length of time it took the customers in the sample to check out was 3.1 minutes with a std. deviation of 0.5 minutes. We want to test to determine whether or not the mean waiting time of all customers is significantly > 3 min. At 95% confidence, it can be concluded that the mean of the population is a. significantly greater than 3.18 b. not significantly greater than 3 c. significantly greater than 3 d. significantly less than 3

Answers

The manager of a grocery store conducted a study with a sample of 100 customers to determine if the mean waiting time is significantly greater than 3 minutes.

With an average checkout time of 3.1 minutes and a standard deviation of 0.5 minutes, at a 95% confidence level, it can be concluded that the mean of the population is c.

significantly greater than 3, the manager of the grocery store took a random sample of 100 customers and found that the average length of time it took customers in the sample to check out was 3.1 minutes with a standard deviation of 0.5 minutes.

The question asks if we can determine whether or not the mean waiting time of all customers is significantly greater than 3 minutes at a 95% confidence level. we need to conduct a hypothesis test. The null hypothesis is that the population mean waiting time is equal to 3 minutes,

while the alternative hypothesis is that the population mean waiting time is greater than 3 minutes. We can use a one-sample t-test to test this hypothesis. With a sample size of 100, we can assume that the sample is normally distributed. Using a t-distribution with 99 degrees of freedom (n-1), we can calculate the t-statistic as:



t = (X- μ) / (s / √n)
t = (3.1 - 3) / (0.5 / √100)
t = 2


Using a t-table with 99 degrees of freedom and a 95% confidence level, we find that the critical value is 1.984. Since our calculated t-statistic (2) is greater than the critical value (1.984), we can reject the null hypothesis and conclude that the mean waiting time of all customers is significantly greater than 3 minutes. Therefore, the answer is: c. significantly greater than 3.

To know more about length click here

brainly.com/question/30625256

#SPJ11

The volume of a sphere can be found by using the formula . As it is being inflated, the radius of a spherical balloon is increasing at a constant rate of 1.5 inches per second. At what rate is the volume of the balloon increasing 7 seconds after inflation has begun

Answers

7 seconds after inflation has begun, the volume of the balloon is increasing at a rate of approximately 2079.68 cubic inches per second.

The formula for the volume of a sphere is V = (4/3)πr^3. Since the radius of the spherical balloon is increasing at a constant rate of 1.5 inches per second, we can find the rate of change of the volume with respect to time by taking the derivative of the volume formula with respect to time:

dV/dt = 4πr^2(dr/dt)

At t = 7 seconds, we know that dr/dt = 1.5 inches per second, and we can find r by using the fact that the balloon is being inflated, so r = 1.5t = 1.5(7) = 10.5 inches. Substituting these values into the equation above, we get:

dV/dt = 4π(10.5)^2(1.5) = 2209.4π cubic inches per second

Therefore, the rate at which the volume of the balloon is increasing 7 seconds after inflation has begun is approximately 2209.4π cubic inches per second.


To find the rate at which the volume of the balloon is increasing 7 seconds after inflation has begun, we will use the given information and the formula for the volume of a sphere.

1. The formula for the volume of a sphere is V = (4/3)πr³, where V is the volume and r is the radius.

2. The radius of the balloon is increasing at a constant rate of 1.5 inches per second. This means that dr/dt = 1.5 inches per second (the rate of change of the radius with respect to time).

3. We need to find dV/dt, the rate of change of the volume with respect to time, at t = 7 seconds.

4. First, we need to find the radius of the balloon at t = 7 seconds. Since the radius is increasing at a rate of 1.5 inches per second, after 7 seconds, the radius will have increased by 1.5 * 7 = 10.5 inches.

5. Now we will differentiate the volume formula with respect to time: dV/dt = d/dt[(4/3)πr³]. Using the chain rule, we get dV/dt = (4πr²)(dr/dt).

6. We know the radius at t = 7 seconds is 10.5 inches and dr/dt = 1.5 inches per second. Plug these values into the equation: dV/dt = (4π(10.5)²)(1.5).

7. Calculate dV/dt: dV/dt ≈ 2079.68 cubic inches per second.

So, 7 seconds after inflation has begun, the volume of the balloon is increasing at a rate of approximately 2079.68 cubic inches per second.

Learn more about radius at: brainly.com/question/13449316

#SPJ11

A researcher conducts an experiment comparing two treatment conditions with 22 scores in each treatment condition. If the researcher used an independent-measures design, how many subjects participated in the experiment

Answers

In an independent-measures design experiment with two treatment conditions and 22 scores in each condition, a total of 44 subjects participated in the experiment.

To determine the number of subjects who participated in the experiment with an independent-measures design and 22 scores in each treatment condition, you simply need to add the number of scores in each condition together.

A researcher conducts an experiment comparing two treatment conditions with 22 scores in each treatment condition. If the researcher used an independent-measures design, how many subjects participated in the experiment are as follows:

Step 1: Identify the number of scores in each treatment condition.
There are 22 scores in each of the two treatment conditions.

Step 2: Add the number of scores in both treatment conditions together.
22 scores (from treatment condition 1) + 22 scores (from treatment condition 2) = 44 scores

To learn more about experiment, refer here:

https://brainly.com/question/30055326#

#SPJ11

find the area of the parallelogram whose vertices are listed. 19. (0,0). (5.2), (6,4). (11.6) 20. (0,0). (-2.4). (6.-5). (4.-1) 21. (-2.0), (0, 3), (1.3). (-1.0)

Answers

The vertices of the parallelogram are (0,0), (5,2), (6,4), and (11,6). We can use the distance formula to find the lengths of the sides of the parallelogram:

The distance between (0,0) and (5,2) is √(5^2 + 2^2) = √29.

The distance between (5,2) and (6,4) is √(1^2 + 2^2) = √5.

The distance between (6,4) and (11,6) is √(5^2 + 2^2) = √29.

The distance between (11,6) and (0,0) is √(11^2 + 6^2) = √157.

Since opposite sides of a parallelogram are congruent, the lengths of the opposite sides are equal. So the area of the parallelogram is the product of the length of one pair of opposite sides and the height, which is the perpendicular distance between the parallel sides. We can find the height by drawing a line perpendicular to one of the parallel sides and finding its length using the Pythagorean theorem. For example, we can draw a line from (0,0) perpendicular to the side connecting (5,2) and (6,4):

The slope of the side connecting (5,2) and (6,4) is (4-2)/(6-5) = 2.

The slope of a line perpendicular to this side is -1/2.

The equation of the line perpendicular to this side passing through (0,0) is y = (-1/2)x.

The x-coordinate of the point where this line intersects the side connecting (5,2) and (6,4) can be found by setting y = 2 in the equation y = (-1/2)x. Solving for x, we get x = -4.

The length of the line from (0,0) to the point (-4,2) is √((-4-0)^2 + (2-0)^2) = 2√5.

So the area of the parallelogram is (length of one pair of opposite sides) x (height) = √29 x 2√5 = 2√145.

Therefore, the area of the parallelogram is 2√145 square units.

The vertices of the parallelogram are (0,0), (-2,4), (6,-5), and (4,-1). We can use the distance formula to find the lengths of the sides of the parallelogram:

The distance between (0,0) and (-2,4) is √((-2-0)^2 + (4-0)^2) = √20.

The distance between (-2,4) and (6,-5) is √((6-(-2))^2 + (-5-4)^2) = √185.

The distance between (6,-5) and (4,-1) is √((4-6)^2 + (-1-(-5))^2) = √20.

The distance between (4,-1) and (0,0) is √((0-4)^2 + (-1-0)^2) = 2√17.

Learn more about Area here:- brainly.com/question/25292087

#SPJ11

You add chlorine to a swimming pool. You add 34 ounces of chlorine the first week and 16 ounces every week thereafter. Each week, 40% of the chlorine in the pool evaporates. a. Write a recursive rule for the amount of chlorine in the pool at the start of the nth week.

Answers

The amount of chlorine in the pool at the start of any given week, we need to know the amount of chlorine in the pool at the start of the previous week.

Let Cn be the amount of chlorine in the pool at the start of the nth week.

We can start by finding the amount of chlorine in the pool at the start of the second week. Since 40% of the chlorine evaporates, we have:

C2 = 0.6(C1 + 16)

Now, we can use this formula to find the amount of chlorine in the pool at the start of the third week:

C3 = 0.6(C2 + 16)

We can continue this process to find a recursive rule for Cn:

Cn = 0.6(Cn-1 + 16)

where C1 = 34.

This formula tells us that to find the amount of chlorine in the pool at the start of any given week, we need to know the amount of chlorine in the pool at the start of the previous week. We can use this formula repeatedly to find the amount of chlorine in the pool at the start of any week.

for such more question on  recursive rule

https://brainly.com/question/24871792

#SPJ11

A car travels at a constant speed.

It travels a distance of 146.2 m, correct to 1 decimal place.
This takes 7 seconds, correct to nearest second.
Calculate the upper bound for the speed of the car.​

Answers

Answer:

Answer below.

Step-by-step explanation:

Formula to use:

upper bound of speed = upper bound of distance/lower bound of time

Upper bound of distance = 146.25m

Lower bound of time = 6.5s

Upper bound of speed = 146.25/6.5

= 22.5m/s

Answer:

22.5m/s

Step-by-step explanation:

upper bound=higher value of distance /lower value of time upper value of distance=146.2+0.05=146.25lower value of time=7-0.5=6.5146.25/6.5=22.5m/s

How large a sample must be obtained to be 94% confident that the true mean IQV is within 2 points of the sample mean

Answers

A sample size of 200 must be obtained to be 94% confident that the true mean IQ is within 2 points of the sample mean, assuming a population standard deviation of 15.

To determine the sample size required to be 94% confident that the true mean IQ (µ) is within 2 points of the sample mean, we will use the following terms:
Confidence level (94%)
Margin of error (E) - 2 points
Population standard deviation (σ) - we need this value to calculate the sample size.
Z-score (Z) - the number of standard deviations away from the mean, corresponding to the given confidence level.
Since the standard deviation of the population (σ) is not provided, I will assume a typical value for IQ scores, which is 15.

If you have a different value, you can plug it into the formula.
Steps to determine the sample size (n):
Find the Z-score (Z) corresponding to the 94% confidence level. You can use a Z-score table or calculator. For 94% confidence level, the Z-score is approximately 1.88.
Determine the margin of error (E), which is given as 2 points.
Use the sample size formula:
[tex]n = (Z^2 * \sigma ^2) / E^2[/tex]
[tex]n = (1.88^2 * 15^2) / 2^2[/tex]
  n = (3.5344 * 225) / 4
  n = 797.52 / 4
  n = 199.38.

Round up the value of n to the nearest whole number, as you cannot have a fraction of a sample.

In this case, n = 200.

For similar question on standard deviation.

https://brainly.com/question/24298037

#SPJ11

A school system has 16 bus drivers that must cover 12 bus routes. Each driver can cover at most one route. The driver's bids for the various routes are listed in the file P05_45.xlsx. Each bid indicates the amount the driver will charge the school system to drive that route. How should the drivers be assigned to the routes to minimize the school system's cost

Answers

Since each driver can cover at most one route, we will continuous this process until all 12 routes have been assigned to a driver. This will ensure that the school system pays the least amount possible for the 12 bus routes.

To minimize the school system's cost while assigning drivers to the bus routes, follow these steps:

1. Open the file P05_45.xlsx and arrange the data in a clear format, such as a table with drivers listed vertically and routes listed horizontally. Each cell should contain the amount a driver charges for a specific route.

2. Identify the lowest bid for each route. You can do this by going through each column (representing a route) and finding the minimum amount.

3. Assign the driver with the lowest bid to the corresponding route. Make sure to keep track of which drivers have already been assigned to avoid assigning them to multiple routes.

4. Continue this process for all 12 routes. Remember, each of the 16 drivers can only be assigned to one route.

5. Once all drivers have been assigned to the routes, add up the amounts for each assigned driver to find the total cost for the school system.

Learn more about the Continuous:

brainly.com/question/31694381

#SPJ11

In an independent groups experiment, if we must estimate the population standard deviation to determine the significance of the sample results, the appropriate inference test is the _________.

Answers

In an independent groups experiment, if you must estimate the population standard deviation to determine the significance of the sample results, the appropriate inference test is an F-test or the F-distribution, Welch's t-test.

Explanation:

The F-test is used to compare the variances of two or more groups. In the context of an independent groups experiment, where two or more groups are being compared, the F-test can be used to estimate the population standard deviation by comparing the variances of the samples from each group.

To conduct an F-test, the variances of the samples from each group are calculated, and the ratio of the largest sample variance to the smallest sample variance is computed. This ratio follows an F-distribution, which is a continuous probability distribution with two degrees of freedom: one for the numerator (largest sample variance) and one for the denominator (smallest sample variance). The F-distribution is used to determine whether the observed ratio of sample variances is statistically significant or not.

If the F-test results in a statistically significant ratio of sample variances, it indicates that the population standard deviations are likely to be different. In this case, the appropriate inference test would be a test that takes into account unequal population standard deviations, such as Welch's t-test, which is a modified version of the independent samples t-test that accounts for unequal variances. Welch's t-test is commonly used when the assumption of equal variances is violated in an independent groups experiment, and the population standard deviations cannot be assumed to be equal.

In summary, the appropriate inference test for estimating the population standard deviation in an independent groups experiment is the F-test or the F-distribution. If the F-test results in statistically significant differences in sample variances, then a modified version of the t-test, such as Welch's t-test, should be used to determine the significance of the sample results.

Therefore, the appropriate inference test for estimating the population standard deviation in an independent groups experiment is the F-test or the F-distribution.

Know more about the F-test click here:

https://brainly.com/question/29999859

#SPJ11

An object is moving ata speed of 63 centimeters every 2 days. Express this speed in meters per hour. Round your answer to the nearest hundredth. "Note: you must use these exact conversion factors to get this question right. Distance / length 1 foot (ft) = 12 inches (in) 1 yard (yd) = 3 feet (ft) 1 mile (mi) = 528o feet (ft) 1 meter (m) = 100 centimeters (cm) 1inch (in) = 2.54 centimeters (cm) 1 foot (ft) = 0.305 meters (mn) Time 1 mile (mi) = 1.609 kilometers (km) 1 minute (min) = 60 seconds (sec) 1 hour (hr) = 60 minutes (min) 1 kilometer (km) = 1000 meters (m) 1 month (month) = 30 days (days) 1 day (day) = 24 hours (hr) 1 week (week) = 7 days (days) 1 year (year) = 365 days (days)​

Answers

Step-by-step explanation:

the given speed is

63 cm / 2 days

1 m = 100 cm

therefore, m = cm/100.

so,

63 cm = 0.63 m

1 day = 24 h

therefore,

2 days = 24×2 = 48 h

so, we have a speed of

0.63 m / 48 h

we need to get the speed of meters in 1 hour.

so, we need to do a normal fraction operation.

e.g. when we have 43/10, but we want to have 1 in the denominator (bottom part).

what do we do ? well, we divide top and bottom (to keep the total value of the fraction unchanged) by 10 and get

4.3/1 = 4.3

we do the same with

0.63 m / 48 h

as we want to have only 1 hour in the denominator.

we divide top and bottom by 48 :

0.63/48 / 1 h = 0.013125 m/h ≈ 0.01 m/h

After five practice sessions, some freshmen Cadets in your squad still can't do an about face. They seem to be trying, but just aren't getting it. What supervisory function do you need to exercise more with these Cadets

Answers

As a supervisor, if some freshmen cadets in your squad are struggling with a particular skill like the "about face,"

A supervisor is a person who oversees the work of others and ensures that tasks are completed efficiently and effectively. They are typically responsible for managing a team of employees and providing guidance and direction to help them achieve their goals.

Supervisors are essential in most industries, including manufacturing, retail, healthcare, education, and many others. They are often responsible for hiring and training new employees, setting performance expectations, and monitoring progress to ensure that goals are met. They may also be responsible for developing work schedules, coordinating team meetings, and handling employee conflicts.

To learn more about Supervisor visit here:

brainly.com/question/16888664

#SPJ4

Solder-less lugs are quoted at $4.25 each less 40% for standard packages of 100 (quote includes the 40 percent discount). What will be the cost if only 22 are ordered at list price less 35%

Answers

The cost of ordering 22 solder-less lugs at the list price less 35% will be $101.20.

Solder-less lugs are priced at $4.25 each, including a 40% discount when purchased in standard packages of 100. To find the original price without the discount, we'll first calculate the price before the 40% discount:

$4.25 / (1 - 0.40) = $4.25 / 0.60 = $7.08 (rounded to 2 decimal places)

Now, if you only need 22 solder-less lugs and are eligible for a 35% discount, we'll calculate the discounted price for each lug:

$7.08 * (1 - 0.35) = $7.08 * 0.65 = $4.60 (rounded to 2 decimal places)

Finally, to find the total cost for 22 solder-less lugs with a 35% discount, we'll multiply the discounted price by the quantity ordered:

$4.60 * 22 = $101.20

To learn more about discounted price click here

brainly.com/question/19867145

#SPJ11

Gustavo tested 1000 calculators to see if any were defective. The company claimed that the probability of a defective calculator was 1% per 1000 calculators. Gustavo found 15 defective calculators out of 1000. What was the predicted frequency

Answers

We can say that Gustavo found a higher frequency of defective calculators than what the company claimed was expected.

The company claimed that the probability of a defective calculator was 1% per 1000 calculators. This means that they expected 1% of the calculators to be defective.

So, the predicted frequency of defective calculators in the sample of 1000 calculators would be:

Predicted frequency = 1% of 1000 = 0.01 x 1000 = 10

However, Gustavo found 15 defective calculators out of 1000. This is higher than the predicted frequency of 10 defective calculators.

So, the actual frequency of defective calculators in Gustavo's sample is 15/1000 = 0.015, or 1.5%. This is higher than the expected frequency of 1%.

It's worth noting that the sample size of 1000 calculators is quite large, so it's possible that the actual frequency is closer to the expected frequency than it appears in this particular sample. However, based on this sample, we can say that Gustavo found a higher frequency of defective calculators than what the company claimed was expected.

for such more question on frequency

https://brainly.com/question/26754018

#SPJ11

A certain wrench has a 5% breakage rate in normal use. Another brand of wrench has a 2% breakage rate. What is the percent chance that a person who uses both wrenches moderately often will break both during normal use?

Answers

The percent chance that a person who uses both wrenches moderately often will break both during normal use is 0.1%. This is calculated by multiplying the probabilities of breaking each wrench, which are 5% and 2%, respectively.

To find the percent chance that a person who uses both wrenches moderately often will break both during normal use, we need to use the multiplication rule of probability.

The probability of breaking both wrenches is the product of the probabilities of breaking each wrench.

Let A be the event that the first wrench breaks, and B be the event that the second wrench breaks.

The probability of A is 0.05, and the probability of B is 0.02.

Therefore, the probability of breaking both wrenches is

P(A and B) = P(A) * P(B)

P(A and B) = 0.05 * 0.02

P(A and B) = 0.001

To express this probability as a percentage, we multiply by 100

P(A and B) = 0.001 * 100

P(A and B) = 0.1%

Therefore, there is a 0.1% chance that a person who uses both wrenches moderately often will break both during normal use.

To know more about Probability:

https://brainly.com/question/11234923

#SPJ1

A sample is considered as undisturbed when the area ratio is 10% or less Group of answer choices True False

Answers

False. The term "undisturbed" refers to the state of the soil or sediment sample before it is collected.

An undisturbed sample is one that has not been altered or disturbed in any way during the sampling process.

The area ratio, on the other hand, is a measure of the disturbance caused by the sampling process itself. It is defined as the ratio of the area of the disturbed zone to the total area of the sample. A low area ratio indicates minimal disturbance, while a high area ratio indicates significant disturbance. While there is no universally accepted cutoff for what constitutes an "undisturbed" sample, a common guideline is to aim for an area ratio of 10% or less. This means that the disturbed zone should not make up more than 10% of the total sample area. However, it is important to note that this is not a hard and fast rule, and the acceptable level of disturbance may vary depending on the specific research question or application.In general, a lower area ratio is preferred, as it minimizes the risk of altering the physical and chemical properties of the sample.

Know more about the undisturbed sample

https://brainly.com/question/13024604

#SPJ11

answer a and b for me please

Answers

Answer:

a) 52 beads

b) 8 beads

Step-by-step explanation:

a) First find how many beads fills one inch by dividing 12 by 3.

 Number of beads that fill 1 inch = 12 ÷ 3

                                                      = 4 beads

Now, to find the beads need to fill 13 inches string, multiply 4 and 13.

Number of beads that fill 13 inches = 4 * 13

                                                          = 52 beads

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

b)   Number of beads that fill 1 inch = 4 beads

     Number of beads to be removed = 4 + 4

                                                              = 8 beads

George spent 80% of his savings to buy a camera. The camera cost $580. How much did he have in savings before he bought the camera?​

Answers

Answer:

George had $725 in savings

Step-by-step explanation:

Let's assume that George had x dollars in savings before he bought the camera.

According to the problem, George spent 80% of his savings to buy the camera, which means he had 20% of his savings left after the purchase. We can write this as:

0.20x = amount of savings left after buying the camera

We also know that the camera cost $580. We can set up an equation to relate the cost of the camera to the amount of savings that George had before buying the camera:

0.80x = $580

Solving for x, we get:

x = $580 / 0.80

x = $725

Therefore, George had $725 in savings before he bought the camera.

Find f(x) if f(2) = 1 and the tangent line at x has slope (x − 1)ex2 − 2x.

f(x)= _____________

Answers

If f(2) = 1 and the tangent line at x has slope (x − 1)ex2 − 2x. f(x) = ((x^2 - 2x + 1)/2)e^(x^2 - 2x).

To find f(x), we'll first integrate the given slope function to obtain the original function. The slope of the tangent line is given as (x - 1)e^(x^2 - 2x).

Let F'(x) = (x - 1)e^(x^2 - 2x). To find f(x), we need to integrate F'(x) with respect to x:

∫(x - 1)e^(x^2 - 2x) dx

Now, we can use substitution. Let u = x^2 - 2x, then du = (2x - 2) dx. Therefore, the integral becomes:

∫((u + 1)/2)e^u du

Now, we can integrate by parts. Let v = e^u, then dv = e^u du. Let w = (u + 1)/2, then dw = 1/2 du. Using integration by parts formula:

∫w dv = wv - ∫v dw

∫(u + 1)/2 * e^u du = ((u + 1)/2)e^u - ∫(1/2)e^u du

Now integrate the remaining part:

∫(1/2)e^u du = (1/2)e^u + C

Substituting back:

f(x) = ((x^2 - 2x + 1)/2)e^(x^2 - 2x) + C

Now, use the given condition f(2) = 1:

1 = ((2^2 - 2*2 + 1)/2)e^(2^2 - 2*2) + C

1 = (1)e^0 + C

C = 0

Know more about integration here;

https://brainly.com/question/18125359

#SPJ11

In __________ sampling, there is no way to calculate the likelihood that a specific element of the population being studied will be chosen. a.census b.probability c.stratified d.nonprobability e. quota

Answers

Answer:

Option (D) Non-probability

Step-by-step explanation:

In Non-probability sampling, there is no way to calculate the likelihood that a specific element of the population being studied will be chosen.

The correct answer is d. nonprobability sampling.

In nonprobability sampling, the selection of elements from the population is not based on a known probability or randomization process. It does not allow for the calculation of the likelihood of a specific element being chosen because the selection is typically based on convenience, judgment, or availability. Nonprobability sampling methods are often used when it is difficult or impractical to obtain a representative sample from the population of interest.

In contrast, probability sampling methods (option b) involve random selection, and each element in the population has a known probability of being included in the sample. Probability sampling allows for the calculation of sampling probabilities and enables the estimation of sampling errors and the generalizability of findings to the population.

The other options (a. census, c. stratified, and e. quota) are not directly related to the described characteristic of not being able to calculate the likelihood of specific element selection.

A census involves studying the entire population, stratified sampling involves dividing the population into subgroups and sampling from each subgroup, and quota sampling involves selecting individuals based on pre-defined characteristics to meet specific quotas.

To know more about nonprobability refer here

https://brainly.com/question/29062631#

#SPJ11

The circumference of a circle is____.
A. The distance around the circle
B. 2pi
C. The length of the radius
D. The length of the diameter

Answers

Answer:

The distance around the circle.

Step-by-step explanation:

Circumference means the outer area of a particular object or the outer border of the object. When we talk about the circle, the total outer round area is the circumference of the circle.
The formula for circle circumference is 2pir

where pi = 3.14 approx  and the r = radius of the circle

Hence, the answer is the distance around the circle.

A scale model of the front view of Tony’s house is shown.

What is the minimum amount of paint needed for two coats?
A. 594 square centimeters
B. 297 square centimeters
C. 216 square centimeters
D. 81 square centimeters

Answers

The minimum amount of paint needed for two coats will be 297 square centimeters.

The shape is a combination of the rectangle and the triangle. Then the area of the shape is calculated as,

A = 1/2 x 18 x 9 + 18 x 12

A = 81 + 216

A = 297 square centimeters

Hence, the minimum amount of paint needed for two coats will be 297 square centimeters.

More about the area link is given below.

brainly.com/question/27683633

#SPJ1

2= ln(x+9)
Solve for x. Round to the nearest hundredth.

Answers

Answer:

[tex]2 = ln(x + 9) [/tex]

[tex] {e}^{2} = x + 9[/tex]

[tex]x = {e}^{2} - 9[/tex]

[tex]x = - 1.61[/tex]

How do you do number 7 here?

Answers

Answer:

a)

[tex] \sin(2( \frac{5}{13} )) = 2 \sin( \frac{5}{13} ) \cos( \frac{5}{13} ) [/tex]

b)

[tex] \cos( 2(\frac{5}{13}) ) = { cos }^{2} \frac{5}{13} - {sin}^{2} \frac{5}{13} [/tex]

Other Questions
An example of manufacturing overhead costs would be Group of answer choices Direct Materials CEO's Salary Wage of factory supervisor Utility expense on corporate offices Direct Labor Raw Materials Suppose that you are employed as an advisor to the central bank. Select the proper policy recommendation or economic prediction for each of the following scenarios.Which policy is appropriate when a rising aggregate price level is a concern but GDP is growing at an acceptable rate You want to put a 2 inch thick layer of topsoil for a new 15 ft by 12 ft garden. The dirt store sells by the cubic yards. How many cubic yards will you need to order A stem-loop structure followed by a stretch of U nucleotides in the 3'-end of a bacterial mRNA are characteristic of genes that undergo ______. How can a top management team lower the chances that key managers will pursue their own self-interests at the expense of stockholders A survey item asked students to indicate their class rank in college: freshman, sophomore, junior, or senior. Which measure(s) of location would be appropriate for the data generated by that questionnaire item What is a major difference in how the immune system responds to cancer cells versus virus-infected cells A 27.0-g sample of water at 285 K is mixed with 47.0 g water at 320. K. Calculate the final temperature of the mixture assuming no heat loss to the surroundings. Many multinational firms hire managers from different countries who become members of the corporate headquarters staff even though they are not from the parent country; these managers are called ______. Ricky, a security engineer for his company, is performing a review and measurement of all controls to capture changes to any environment component. What is this called A slice of pizza contains 28 g of carbohydrate, 13 g of protein and an unknown amount of fat. If the pizza contains 280 kcal, how many grams of fat are present How could you determine whether the microbes present in the soil or goo samples are phylogenetically similar or distant from known microorganisms on Earth Which of the following statements about myelin is false? Myelin increases transmission speed of an Action Potential Which statement made by the client newly diagnosed with type 2 diabetes mellitus indicates a need for clarification regarding diet therapy When Julius returns after getting a drink of water, he resumes lifting a 150-pound free weight and doesn't notice that someone has added a five-pound ring to each end. For Julius, the additional 10 pounds is: You are at a professional football game. You look across from your seat and notice the other side of the stadium and all of the people in their seats. You close your eyes, and for a brief second, you see an accurate afterimage of that view in your mind. This is an example of ______. echoic memory working memory sensory memory short-term memory Caleb received a notification from a food delivery app that certain restaurants would be out of service for the day. He assumed that these restaurants were physically shut down, which was not the case. This scenario illustrates the concept of _____. Attributes such as imagination and problem-solving ability, strong work ethic, honesty, intimate product knowledge, effective communication and listening skills, and attentiveness reflected in responsiveness to buyer needs and customer loyalty and follow-up are often found in the ________ for sales positions. A satellite imaging system that beams energy at a surface and then records the energy that is reflected is classified as a(n) ________ system. You are driving a car at 10 m/s when a ball bounces in front of you and you slam on the brakes, giving you a constant acceleration of 4 m/s2. How much time does it take to stop