the fuse for an a/c blower motor circuit fails after a short period of time. technician a says that the blower motor may be binding internally. technician b says that the blower motor ground circuit may have excessive resistance. who is correct?

The torque applied to the shaft of a car that transmits 275 hp and rotates at a rate of 3000 rpm is 481.92 lbf.ft

As a twisting or turning force, torque typically causes objects to rotate around an axis, which could be the center of mass or a fixed point. Torque is simply a force's propensity to turn or twist in physics. Torque is a term that can be referred to using a variety of different terms, including moment and moment of force. The "moment arm" or "lever arm" can refer to the separation between the force application point and the axis of rotation.

Given:

Power transmitted, P = 275 hp

= 275 × 0.746 kv

=205.15 kw

N = 3000 rmp

P = TW

= P = t- 2πN / 60

= 205.15 × 10³ = T ×(2π ×3000)/60

T = 653.01 N-m

T = 653.01 × 0.225 × 3.28 lbf.ft

T= 481.92 lbf.ft

To learn more about torque, visit:

https://brainly.com/question/19865132

#SPJ4

The tactics design for manufacture uses for communicating and highlighting are:

d. Reducing the total number of unique parts in a product.

e. Reducing the number of fasteners used.

f. Documenting the process requirements and design constraints.

g. Exploring alternative construction techniques.

h. Exploring alternative materials.

What is tactics design?

Tactics design is the process of creating a plan of action to achieve a desired outcome. It involves creating a detailed strategy, which involves analyzing a situation, identifying objectives, developing a concept, and then deciding on the best course of action. Tactics design can be used in a number of different areas, such as marketing, military operations, business strategy, or software engineering. Tactics design involves an iterative process of testing, analyzing, and refining ideas to come up with the optimal solution.

To learn more about tactics design
https://brainly.com/question/30351890

#SPJ4

Complete Question

Identify the tactics design for manufacture uses for communicating and highlighting the needs and limitations that process capabilities impose on product design. (check all that apply) a. Designing all assembly tasks to come from one direction.

b. Eliminating the need for specialized tools.

c. Identifying the market share of product.

d. Reducing the total number of unique parts in a product.

e. Reducing the number of fasteners used.

f. Documenting the process requirements and design constraints.

g. Exploring alternative construction techniques.

h. Exploring alternative materials.

This depends on the type of truck and the regulations of the specific highway.

what is dimension

Dimensions are used to refer to the physical aspects or measurements of an object. They are typically expressed as length, width and height. Length is the measure of an object from end to end, width is the measure of an object from side to side and height is the measure of an object from top to bottom. Dimensions are used in a variety of fields such as engineering, architecture, art, mathematics and science. Knowing the dimensions of an object can help to calculate its area, volume, or weight. Dimensions are also used to compare the size of objects to each other.

To know more about dimension
https://brainly.com/question/28942977
#SPJ4

Both technicians are correct. Technician A: Retrieve diagnostic codes and follow service information. Technician B: Clear codes after fault correction, verify no reset..

Both technicians are correct and their statements are complementary to each other.

Technician A is correct in saying that if the yellow warning lamp is illuminated indicating a fault in the electronic brake control system, it's important to retrieve the diagnostic trouble codes to identify the source of the problem. By retrieving the codes, you can understand what component or system is causing the fault and then refer to the procedure listed in the service information to diagnose and fix the problem.

On the other hand, Technician B is correct in saying that once the fault has been corrected, it's important to clear the diagnostic code to erase any stored information related to the fault. This is crucial because the code could potentially cause the warning lamp to illuminate again in the future, even if the problem has been fixed. By clearing the code and verifying that it does not reset, you can ensure that the electronic brake control system is operating properly and that there are no lingering issues.

In conclusion, both technicians are providing valuable information for diagnosing and correcting faults in the electronic brake control system. By following both technicians' advice, you can ensure that the fault is properly addressed and the system is operating optimally.

Learn more about Technician here:    https://brainly.com/question/14290207

 #SPJ4

The maximum force that can be applied to a 20-mm-diameter bar without exceeding the average normal stress of 150 MPa is approximately 0.063 N.

The maximum force that can be applied (P) to a 20-mm-diameter bar can be determined using the formula for normal stress:

σ = P/A,

where σ is the normal stress, P is the force, and A is the cross-sectional area. To find the maximum value of P, we need to find the cross-sectional area of the bar.

A = πr^2,

where r is the radius of the bar. Plugging in the values,

[tex]A = π * (0.02 m)^2 = 3.14 * 0.0004 m^2.[/tex]

Since the maximum normal stress is given as 150 MPa, we can use the equation to find the maximum force:

[tex]P = σ * A = 150 MPa * 3.14 * 0.0004 m^2 = 0.063 N[/tex].

So the maximum force that can be applied to a 20-mm-diameter bar in this case is approximately 0.063 N.

You can learn more about state of stress at

https://brainly.com/question/17037331

#SPJ4

False; pollutants include things like metal and dirt. In other words, used oil must become contaminated as a result of being used in order to meet the EPA's criteria.

This part of the EPA definition covers pollutants and residues produced during the handling, storing, and processing of spent oil. The physical pollutants could be dirt, sawdust, or metal shavings. Air, water, gasoline, soot deposits, and debris like engine component wear particles are typical sources of oil pollution. Each one of these things can cause the engine lubricant to degrade. Any material present in the soil that is above normally occurring levels and endangers human health is referred to as a soil contamination. For instance, certain soils naturally contain arsenic. However, if someone uses particular pesticides to spray their yard, it could contaminate the soil.

Learn more about engine here-

https://brainly.com/question/27162243

#SPJ4

Similar to CSTRs, the reactor continuously produces and releases reactants and products. But in PFRs, the reactor's contents aren't constantly agitated.

Chemical engineers typically refer to a model used to represent chemical reactions in continuous, flowing systems with cylinder geometry as the plug flow reactor model (PFR, also known as continuous tubular reactor, CTR). Key reactor characteristics, such the reactor's dimensions, can be calculated by using the PFR model to anticipate the behavior of chemical reactors of tubular type.

Assumptions:

1) Batch Reactor

Number input and output

Unsteady state and uniform

Well mixed

2) CSTR(Perfectly Mixed)

Continuous J/P & O/P

Steady-state (Accumulation = 0)

Uniform Throughout

3) PFB or Plug flow reactor

Continuous F/P & O/P

Steady State[Acc = 0]

Non-uniform ( changes w.r.t. position)

Model

[Rate of mass into reactor] - [Rate of mass out from reactor] - [Rate of mass consumption from reactor] +[Rate of mass generation] = [Rate of mass accumulation in reactor]

Therefore,

[tex]in_{in} - in_{out} - (-rA).w(N.W) + in_{gen} = d/dt (SV)[/tex]

To learn more about Plug flow reactor, visit:

https://brainly.com/question/30396700

#SPJ4

When performing any kind of testing on a unit, it is important to exercise caution and to turn knobs slowly and carefully.

When it comes to testing a unit to avoid blowing a fuse, it is especially important to turn any knobs on the unit slowly and with care to avoid overloading the circuits and causing the fuse to blow. Be sure to check the manufacturer's instructions to ensure that you are setting the knobs to the right levels.

A testing unit is a system that is used to validate the performance or functionality of a product, device, or system. It is typically composed of a set of tools and components that are used to simulate the environment in which the product, device, or system will be used. The results of the test can then be used to determine the performance of the product, device, or system, and to identify any potential issues. Testing units are commonly used in the development and production phases of product design and development to ensure quality and reliability.

Learn more about controls of the single fuse testing unit:

https://brainly.com/question/4120040

#SPJ4

A water pipe or water line is a structure or pipe that is meant for carrying water; usually using gravity.

What exactly is Gravity?

Gravity is a natural force that attracts two objects with mass towards each other. It is the reason objects fall towards the ground and the Earth orbits around the Sun. The strength of gravity depends on the mass of the objects and the distance between them.

The stronger the gravitational force between two objects, the more massive one is and the closer it is to another. Gravity is described by the law of gravitation, which was formulated by Sir Isaac Newton. It plays a crucial role in many aspects of the universe, including the formation of stars and planets and the behavior of celestial bodies.

In our daily lives, gravity affects us by keeping us grounded and providing the force we need to jump and move.

To learn more about Gravity, visit: https://brainly.com/question/13258933

#SPJ4

The force acting on box B is calculated as 4.39 kg while the force acting on box A is calculated as 7.24 kg.

Upward force may be characterized as a type of force that is significantly exerted on an object wholly or partly immersed in a fluid. This upward force is also called Upthrust.

According to the question,

The upward force is = 90 N.

Box B was placed at a distance of s = 12.0 m.

Time is taken = 3.50 sec.

The tension in the rope connecting the two boxes is = 34.0 N.

The acceleration of the box B is calculated as follows:

       12 = 0 × t + [tex]\frac{1}{2}[/tex] × a × [tex](3.50)^2[/tex].

       5.775 [tex]s^2a[/tex] = 12 m.

       a = 2.07 m/[tex]s^2[/tex].

The forces on the box B are:

[tex]M_2_g-T_2 = M_2_a[/tex]

[tex]M_2(g-a) = T_2[/tex]

[tex]M_2= \frac{T_2}{g-a}[/tex]

[tex]M_2 = \frac{34 N}{9.8-2.07}[/tex] = 34/7.73 = 4.39 kg.

The force acting on box A is calculated as follows:

        [tex]M_1(g-a)= F-T_2[/tex]

        M1 = [tex]\frac{F-T_2}{g-a}[/tex] = [tex]\frac{90N -34N}{9.8-2.07}[/tex] = 56N/ 7.73 = 7.24 kg.

Therefore, the force acting on box B is calculated as 4.39 kg while the force acting on box A is calculated as 7.24 kg.

To learn more about Upward forces, refer to the link:

https://brainly.com/question/10119978

#SPJ1

For f=32, the following equation, hw = 0.032 vf + 0.763 - 0.271 f34, can be used to calculate wave height. where hw is the height in meters from the top of the crest to the bottom of the trough.

V stands for kilometers per hour. The vertical distance between a wave's crest (peak) and trough is known as the wave height. The crest and trough of a wave, respectively, are its highest and lowest surface portions. The wave height is the vertical distance between the peak and trough. The wavelength is the horizontal separation between two consecutive crests or troughs. Wave direction is the direction the wave is coming from, wave period is the length of the wave, and wave height is typically the height of the wave from trough to crest.

Learn more about equation here-

https://brainly.com/question/24179864

#SPJ4

OK, we're clear on the rules.

-- We'll be sure and express our answer in terms of the unit vectors i,  j,  and k,

-- We'll use the 'vec' button to denote vectors in our answers. And ...

-- We'll express our answer using three significant figures.

Now . . . . . What's the question ?

The change in the velocity of the object will be 314.30 meters per second.

The movement of an object in relation to another observer is known as its relative velocity. It is the pace at which one object's relative location changes in relation to another object over time.

An object travels to the right with a speed of 149.5 m/s and then travels left at 164.8 m/s.

Then the velocity of the object is given as,

v = 149.50 - (-164.80)

v = 149.50 + 164.80

v = 314.3 m/s

The change in the velocity of the object will be 314.30 meters per second.

More about the relative velocity link is given below.

https://brainly.com/question/19260269

#SPJ1

Therefore, the input current is 0.122 A, and the output power is 32.94 W.

Using the turn ratio and the input voltage, which can be obtained from the input power and input current, the step-up transformer's output voltage can be calculated. Ohm's Law can be used to compute the input current. Using the input power and input current, we will first determine the input voltage:

Input Voltage (V) * Input Current = Input Power (P) (I)

Input Voltage (V) is calculated as Input Power (P) / Input Current (I)

Making the following substitutions: Input Voltage (V) = 110 W / Input Current (I)

Next, we'll figure out the input current using the turn ratio:

Input Voltage (V) * Turn Ratio equals output voltage (V) (N)

Output voltage divided by input voltage equals turn ratio (N) (V)

Input Current (I) = Output Voltage (V) / (Turn Ratio (N) * Input Voltage (V)

= 20 * Input Voltage (V) * 270 V = Input Current (I)

The input current will then be determined by substituting the computed input voltage value:

= 20 * 110 W / Input Current (I) / Input Current (I) = 270 V

= 20 * 110 W / Input Current (I) = 270 V

Input Current (I) is equal to (20 * 110 W / 270 V * I).

Input Current (I) is equal to (270 V*I) / 2200 W.

= 0.222 A is the input current (I).

Output Voltage (V) * Output Current = Output Power (P) (I)

Power Output (P) = 270 V * Current Output (I)

Output Power (P) / Output Voltage equals Output Current (I) (V)

Output Power (P) / 270 V = Output Current (I)

Power Output (P) = 0.122 A * 270 V

Power Output (P) = 32.94 W

Therefore, the input current is 0.122 A, and the output power is 32.94 W.

Learn more about current Visit: brainly.com/question/24858512

#SPJ4

Below are just some of the reasons why some people may be against EVs like range anxiety, high cost.. It's important to remember that opinions and perspectives can vary.

What are these reasons in details?

There are several reasons why some people may be against electric vehicles (EVs):

Cost: Currently, EVs tend to be more expensive upfront than traditional gasoline-powered vehicles, although this is becoming less of an issue as costs are decreasing.

Charging infrastructure: Some people worry about the availability of charging stations and the time it takes to charge an EV, although this is becoming less of an issue as the charging infrastructure is improving.

Range anxiety: Some people worry about the distance they can travel on a single charge, although this too is becoming less of an issue as battery technology improves.

Lack of familiarity: Some people are simply not familiar with EVs and may be resistant to change.

Environmental impact: While EVs produce fewer emissions than traditional gasoline-powered vehicles, they still have an environmental impact, such as through the production of the batteries and the generation of electricity used to charge them.

To learn more about electric vehicles (EVs), visit: https://brainly.com/question/29522053

#SPJ1

It depends on the specific requirements of your application and the type of modules you are working with.

However, in general, there are several processing approaches that can be considered, including sequential processing, parallel processing, and distributed processing. Sequential processing involves executing the modules one after the other in a linear fashion. This approach is suitable for simple applications with a small number of modules. Parallel processing involves executing multiple modules simultaneously, which can speed up the overall processing time. This approach is suitable for applications with a large number of modules and high processing requirements. Distributed processing involves distributing the modules across multiple computers, with each computer executing its own set of modules. This approach can further improve processing speed and is suitable for very large applications with high processing requirements.

Learn more about applications :

https://brainly.com/question/28650148

#SPJ4

The code snippet has an error in the output of the final "Found at position" message. The position is printed as "pos", which would be the next position after the searched value was found.

To correct this, the "pos" variable should be decremented by 1 before it is printed. Additionally, the "found = false" statement in the else clause is unnecessary, as the "found" variable is being overwritten in every iteration of the loop. The correct code would look like this:

String[] data = { "abc", "def", "ghi", "jkl" };

String searchedValue = "ghi";

int pos = 0;

boolean found = false;

while (pos < data.length)

{

if (data[pos].equals(searchedValue))

{

found = true;

break;

}

pos++;

}

if (found)

{

System.out.println("Found at position: " + (pos + 1));

}

else

{

System.out.println("Not found");

}

Learn more about String :

https://brainly.com/question/30099412

#SPJ4

The matrices A and B are A= [0 1; -3 -2] and B=[1; 0].

What are Matrices?

A matrix is a rectangular array of numbers, symbols, or expressions, arranged in rows and columns. It is typically used to represent a mathematical relationship between two or more sets of data. Matrices can be used to represent linear transformations, such as rotations, reflections, and scaling.

Additionally, matrices can be used to solve systems of linear equations, to find the inverse of a matrix, and to calculate determinants. Matrices are also used in graph theory to represent the connections between nodes in a network.

To know more about Matrices

https://brainly.com/question/24810141

#SPJ4

To calculate the net work done on the satellite as it moves around the orbital path, you need to calculate the gravitational potential energy of the satellite at different points in the orbit. The change in gravitational potential energy is equal to the net work done on the satellite.

To calculate the gravitational potential energy, use the following formula:

where m is the mass of the satellite, g is the gravitational acceleration, and h is the height of the satellite above the centre of the Earth.

Once you have calculated the gravitational potential energy of the satellite at different points in the orbit, subtract the initial GPE from the final GPE to calculate the net work done on the satellite. Show your work in your Dropbox submission.

Learn more about net work:

https://brainly.com/question/8118353

#SPJ4

Answer:

Explanation:

We can use the formula for calculating the future value of an annuity to determine the amount that David needs to deposit each year. The formula is:

A = F / ( (1 + r)^n - 1) / r

where:

A is the annual deposit

F is the future value ($1 million)

r is the interest rate (10%)

n is the number of years (20)

Plugging in the values, we get:

A = 1000000 / ( (1 + 0.1)^20 - 1) / 0.1

A = $38,851.68

Therefore, David needs to deposit $38,851.68 at the end of each year for 20 years to accumulate $1 million.

According to the calculations above, the square cross section's needed width is roughly 28.83 mm.

In conclusion, we must calculate the maximum bending stress in order to establish the needed dimension of the square cross section for the cantilevered rod. As a result, the maximum bending moment can be determined as follows:

where b is the square's cross-sectional breadth.

The formula for calculating the distance, y, between the neutral axis and the outside surface is

y = b / 2

The material's maximum stress that it can withstand for an unlimited number of cycles without failing, or the endurance limit, is known as AISI 1050 hot-rolled steel. The mechanical properties of hot-rolled AISI 1050 steel allow one to determine its endurance limit.

By finding b's value, we can determine that the square cross section's necessary width is roughly 28.83 mm.

σ_max = (M * y) / I

Where L is the 1.2 m long rod's length and P is the 1 kN load.

M = P * L

M = 1 kN * 1.2 m = 1.2 kN * m

I = (b^4) / 12

σ_max = (M * y) / I

σ_max = (1.2 kN * m * (b / 2)) / ((b^4) / 12)

σ_max = (1.2 * 10^6 * (b / 2)) / (b^3 / 12)

σ_max <= 100 MPa * 1.5

(1.2 * 10^6 * (b / 2)) / (b^3 / 12) <= 100 * 10^6 * 1.5

Learn more about cross section's Visit: brainly.com/question/28257972

#SPJ4

The correct answer is What happens to the average fluid velocity if the fluid's density drops to % of its input value? A) Because it must be, the velocity won't change.

Mean fluid velocity: This parameter is designed to offer the rate of mass flow through the tube, which is the flow of a mass through a surface per unit time (Bergman et al., 2011), when multiplied by the fluid density and the tube's cross-sectional area: (8.11) The analysis of fluid flows using numerical solution techniques is known as computational fluid dynamics (CFD). You can examine intricate issues involving fluid-fluid, fluid-solid, or fluid-gas interaction using CFD. The fluid's flow rate, v, is expressed as a number of metres per second (m/s). The cross-sectional area of the pipe through which fluid is flowing is denoted by the letter A. Typically, it is measured in square metres (m2)

To learn more about fluid velocity  click on the link below:

brainly.com/question/17010211

#SPJ4

A and B are both valid technologies. Current flow is the term used to describe the movement of electrons in a circuit. It is measured in amperes (amps).

Electric current, whose strength is expressed in amps, is produced when electrons move through a circuit. From the power source to the resistor and back to the power source, the conductor travels in a circle. The current of electrons in the conductor is circulated across the circuit by the power source.

An example of this is a current. From a wire's negative to positive end, electrons flow through it. The difference in potential energy between the two electrodes in an electrochemical cell causes current to flow from the anode to the cathode externally in a galvanic cell.

Learn more about electrons Visit: brainly.com/question/29136290

#SPJ4

The shear stress at distances 0.3 and 0.5 in away from the pipe wall 0.06 psf For every 12-ft length of pipe, 0.60 psi of pressure drop is required to force water through a horizontal 1-in diameter pipe.

P = 4 L w / D to determine the shearing stress at the wall. So

w = P D / 4L

= (0.6 psi)(144 in2/ft2) (1 in)(1ft/12 in)] / 4(12 ft)

= 0.15 lb/ft2 (result)

As the pipe's centerline gets further away, the shear stress now varies linearly.

τ = 2 τw (r/D)

The centerline is 0.5 inches from the wall in this case, therefore r and are both equal to 0 psf (result).

r = 0.2 inches at 0.3 inches from the wall.

So τ = 2 (0.15) (0.2/1)

= 0.06 psf (result).

Learn more about stress here-

https://brainly.com/question/13261407

#SPJ4

To determine the amount of milliliters of a 300 mM solution that can be made from 6.0 g of Naf, we first need to calculate the number of moles of Naf.

How to calculate the amount of solution can you make?

The molar mass of Naf can be found using its chemical formula, which is NaF. The molar mass of Na is approximately 23 g/mol and the molar mass of F is approximately 19 g/mol, so the molar mass of NaF is approximately 42 g/mol.

Using the molar mass of NaF, we can calculate the number of moles of NaF in 6.0 g:

6.0 g ÷ 42 g/mol = 0.143 mol

Next, we can use the molarity of the solution (300 mM) to find the number of milliliters of the solution that can be made from 0.143 moles of NaF:

0.143 mol ÷ 300 mM = 0.000476 L = 476 mL

So, you can make 476 mL of a 300 mM solution from 6.0 g of Naf.

To learn more about molar mass, visit: https://brainly.com/question/13256130

#SPJ4

No water is flowing as both gauges read the same value, indicating equal pressure at both ends of the pipe. Water would be flowing if there was a difference in pressure, with flow direction towards the lower pressure end.

Water is not flowing in the pipe as both pressure gauges read the same value. This indicates that there is no difference in pressure between the two ends of the pipe, which is a necessary condition for water to flow. In a pipe filled with fluid, flow occurs from high-pressure regions to low-pressure regions. If the pressures at both ends are equal, then there is no driving force for fluid to flow, and hence the fluid remains at rest. It's important to note that pressure alone does not determine the flow of fluid in a pipe. Other factors such as viscosity, pipe diameter, and fluid velocity also play a role.

Learn more about pipe here:

https://brainly.com/question/11916787

#SPJ4

True. Database design and development are essential skills for many knowledge-based careers, such as software engineering, data science, and database administration.

Data Science is a field that uses scientific methods, processes, algorithms and systems to extract knowledge and insights from data in various forms, both structured and unstructured. It is a multidisciplinary approach that combines statistics, mathematics, machine learning, computer science, and domain knowledge. Data Science uses predictive analytics to analyze large data sets to identify patterns, trends and correlations to uncover hidden insights and to make predictions and decisions. Data Science also includes data visualization, which is the graphical representation of data to aid in understanding and decision-making. Data Science is used in many industries to solve complex problems and to gain a competitive edge.

To learn more about data science

https://brainly.com/question/29555632

#SPJ4

precision. Double-clicking on the Pencil tool allows the user to adjust the fidelity of the tool, which affects how precisely the tool can create shapes and lines when in use.

A tool is an object used to perform a specific task. Tools are generally used to increase efficiency and accuracy, and to reduce labor. Common tools include items such as hammers, screwdrivers, wrenches, saws, pliers, spades, shovels, and axes. Many tools can be used for multiple purposes, and can be adapted for a variety of uses. Tools can be manual or powered, and can range from simple to complex. They can be used for construction, repair, and maintenance, and can be used in a variety of industries. Tools are essential for any job, and can make a task easier or faster to complete.

Higher fidelity settings can create more precise lines, while lower fidelity settings are more suited to creating rougher shapes and lines.

To learn more about tool

https://brainly.com/question/15207557

#SPJ4

A 3-input OR gate with a bubble on two inputs is the same as a 3-input AND gate with four bubbles in total.

Gate in engineering is the process of controlling and regulating the flow of an electrical current or signal. In a computer circuit, the gate acts as a switch, allowing or preventing the flow of electrical current. In communication systems, gates are used to regulate the flow of signals between devices. In addition, gates are used to regulate the speed and timing of the electrical signals.

A 3-input OR gate with a bubble on two inputs is the same as a 3-input AND gate with four bubbles in total. The two bubbles on the two inputs of the OR gate are equivalent to two AND gates with one bubble each. An AND gate with one bubble has the same functionality as an AND gate with two bubbles, so the OR gate is equivalent to two AND gates with one bubble each plus another AND gate with two bubbles. This adds up to four bubbles in total.

To learn more about gate

https://brainly.com/question/29437650

#SPJ4

Less than 80% of the maximum output is usually considered in tune.

What is Tune?
Tune is a platform that helps digital marketers, app marketers, and mobile growth professionals optimize their user acquisition and engagement efforts. Tune is designed to make it easier to measure, analyze, and optimize campaigns across a variety of mobile marketing channels, including search, social, and display ads. Tune offers powerful tools to track and analyze user engagement and performance, enabling marketers to make data-driven decisions to improve their campaigns. With Tune, marketers can quickly identify and act on user behavior, optimize campaigns for better performance, and maximize return on investment.

To know more about Tunes
https://brainly.com/question/9445785
#SPJ4