The following table shows sample salary information for employees with bachelor's and associate’s degrees for a large company in the Southeast United States.
Bachelor's Associate's
Sample size (n) 81 49
Sample mean salary (in $1,000) 60 51
Population variance (σ2) 175 90
The point estimate of the difference between the means of the two populations is ______.

Answer: -3 5/7

Step-by-step explanation: Alrighty!! First thing we need to do is convert all mixed numbers to fractions.

1 4/9 becomes 13/9

-2 4/7 becomes  -18/7

So our equation looks like this now: [tex]\frac{13}{9} * -\frac{18}{7}[/tex]

Multiply the numerators together, and the denominator together!! We get

[tex]-\frac{234}{63}[/tex]

We notice that both the numerator and the denominator are divisible by 9. So now we simplify.

[tex]-\frac{26}{7}[/tex]

Make into a mixed number:

[tex]-3\frac{5}{7}[/tex]

The distance between the point q=(5,-4,-3) and the plane −5x−3y−z=5 is 5/√35 units.

To find the distance between a point and a plane, we need to use the formula:

distance =[tex]|ax + by + cz + d| / √(a^2 + b^2 + c^2)[/tex]

where a, b, and c are the coefficients of the variables x, y, and z in the equation of the plane, and d is the constant term.

So, for the given plane −5x−3y−z=5, we have a=-5, b=-3, c=-1, and d=5.

To find the distance from the point q=(5,-4,-3) to this plane, we need to substitute these values into the formula above:

distance =[tex]|(-5)(5) + (-3)(-4) + (-1)(-3) + 5| / √((-5)^2 + (-3)^2 + (-1)^2)[/tex]

distance = |(-25) + 12 + 3 + 5| / √35

distance = 5/√35

Therefore, the distance between the point [tex]q=(5,-4,-3)[/tex] and the plane −5x−3y−z=5 is 5/√35 units.

Learn more about coefficient here:

https://brainly.com/question/13431100

#SPJ11

Answer:

a) (0,1)

[tex]\sf b) k = \dfrac{13}{2}[/tex]

Step-by-step explanation:

a) The x co-ordinate where the line (y -4x = 1) crosses the y-axis is zero.

       y - 4*0 = 1

             y = 1

co-ordinates (0,1)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

b) y = 2x + c

Compare with y = mx + c.

⇒ m = 2

Two points from the graph: (k , 10) & (0,-3)

Substitute the value of m and the two points in the below formulae and find the value of k.

        [tex]\sf slope =\dfrac{y_2 -y_1}{x_2-x_1}[/tex]

       [tex]\dfrac{-3-10}{0-k}=2\\\\\dfrac{-13}{-k}=2\\\\\\\dfrac{13}{k}=2\\\\\\Cross \ multiply,\\\\[/tex]

              13 = 2k

              [tex]\sf\boxed{ \bf k =\dfrac{13}{2}}\\\\[/tex]

The new limits of integration are:

0 ≤ y ≤ 1

0 ≤ x ≤ 2y

To reverse the order of integration in the integral

∫2 0 ∫1 x/2 f(x,y) dydx

we first need to sketch the region of integration. The limits of integration suggest that the region is a triangle with vertices at (1,0), (2,0), and (1,1).

Thus, we can write the limits of integration as:

1 ≤ y ≤ x/2

0 ≤ x ≤ 2

To reverse the order of integration, we need to integrate with respect to x first. Therefore, we can write:

∫2 0 ∫1 x/2 f(x,y) dydx = ∫1 0 ∫2y 0 f(x,y) dxdy

In the new integral, the limits of integration suggest that we are integrating over a trapezoidal region with vertices at (0,0), (1,0), (2,1), and (0,2).

Thus, the new limits of integration are:

0 ≤ y ≤ 1

0 ≤ x ≤ 2y

Note that the limits of integration for x have changed from x = 1 to x = 2y since we are now integrating with respect to x.

Learn more about integration here:

https://brainly.com/question/31744185

#SPJ11

It will take 18 months for both Penelope and Henry to have the same amount of money in their accounts.

Penelope has $131 in her bank account and deposits $51 per month into her account. Henry has $41 and deposits $56 per month into his account. Let us assume that after t months, they both will have the same amount of money in their accounts.

Let's suppose x is the amount of money that they both will have in their accounts after t months. Using the given information, we can write the following two equations:

For Penelope:$131 + 51t = x-----(1)

For Henry:$41 + 56t = x------(2)

By equating equation (1) and (2), we get:$131 + 51t = $41 + 56t => 5t = 90=> t = 18

It will take 18 months for both Penelope and Henry to have the same amount of money in their accounts.

The explanation of the solution to the given problem has been given above.

Know more about deposits here,

https://brainly.com/question/30186258

#SPJ11

To sketch the curve with the given vector equation r(t) = t, 6 − t, 2t and indicate with an arrow the direction in which t increases, we need to find the points on the curve and then connect those points.

1. Let's put t = 0 in the given vector equation r(t) = t, 6 − t, 2t to find the first point on the curve.

r(0) = 0, 6, 0

Thus, the point on the curve is (0,6,0).

2. Let's select some values of t and put them in the given vector equation to find some additional points on the curve.

When t = 1,r(1) = 1, 5, 2

When t = 2,

r(2) = 2, 4, 4

When t = 3,

r(3) = 3, 3, 6

When t = 4,

r(4) = 4, 2, 8

When t = 5,

r(5) = 5, 1, 10

When t = 6,

r(6) = 6, 0, 12

Thus, we have found some points on the curve, which are (0,6,0), (1,5,2), (2,4,4), (3,3,6), (4,2,8), (5,1,10), and (6,0,12).

3. Now, we can connect these points to sketch the curve.

4. Finally, we indicate with an arrow the direction in which t increases.

We can see that as t increases, the curve moves in the direction of the arrow, which is along the positive x-axis. Thus, we can conclude that the direction in which t increases is along the positive x-axis.

Answer:

Therefore, the curve and the direction in which t increases are shown below in the image.

Learn more about vector equations:

https://brainly.com/question/8873015

#SPJ11

The solution to the differential equation y'' + 4y' + 4y = 25cos(t) + 25sin(t), with initial values y(0) = 1 and y'(0) = 1, is [tex]y(t) = e^(^-^2^t^) * (1 + 2t) + 25/10 * sin(t) + 15/10 * cos(t).[/tex]

To solve the given second-order linear homogeneous differential equation, we first find the complementary solution by solving the characteristic equation. The characteristic equation for the given differential equation is r² + 4r + 4 = 0. Solving this equation gives us a repeated root of -2.

The complementary solution is then obtained as [tex]y_c(t) = (c1 + c2t) * e^(^-^2^t^)[/tex], where c1 and c2 are arbitrary constants.

To find a particular solution, we assume a solution of the form y_p(t) = A * sin(t) + B * cos(t), where A and B are constants to be determined. We substitute this assumed solution into the differential equation and solve for A and B.

By substituting the given initial conditions y(0) = 1 and y'(0) = 1 into the general solution, we can solve for the arbitrary constants c1 and c2. This yields c1 = 1 and c2 = 1.

Finally, the complete solution is obtained by adding the complementary and particular solutions, resulting in[tex]y(t) = y_c(t) + y_p(t) = (1 + t) * e^(-2t) + 25/10 * sin(t) + 15/10 * cos(t).[/tex]

This solution satisfies the given differential equation and the initial conditions.

Learn more about Differential equation

brainly.com/question/31492438

#SPJ11

In a linear time-invariant system, the zero-state response (ZSR) is the output of the system when the input is zero, assuming all initial conditions (such as initial voltage or current) are also zero.

(a) For H1(s) = 1, the zero-state response Yzs(s) is simply the product of the transfer function H1(s) and the input Ei(s):

Yzs(s) = H1(s) * Ei(s) = (45+2)

To find the time-domain zero-state response yzs(t), we need to take the inverse Laplace transform of Yzs(s):

yzs(t) = L^-1{Yzs(s)} = L^-1{(45+2)} = 45δ(t) + 2δ(t)

where δ(t) is the Dirac delta function.

(b) For H2(s) = 45+1, the zero-state response Yzs(s) is again the product of the transfer function H2(s) and the input E2(s):

Yzs(s) = H2(s) * E2(s) = (45+1)E2(s)

To find the time-domain zero-state response yzs(t), we need to take the inverse Laplace transform of Yzs(s):

yzs(t) = L^-1{Yzs(s)} = L^-1{(45+1)E2(s)} = (45+1)e^(t/2)u(t)

where u(t) is the unit step function.

(c) For H3(s) = ns, the zero-state response Yzs(s) is given by:

Yzs(s) = H3(s) * E3(s) = ns * 542

To find the time-domain zero-state response yzs(t), we need to take the inverse Laplace transform of Yzs(s):

yzs(t) = L^-1{Yzs(s)} = L^-1{ns * 542} = 542L^-1{ns}

Using the inverse Laplace transform from problem 1, we have:

yzs(t) = 542 δ'(t) = -542 δ(t)

where δ'(t) is the derivative of the Dirac delta function.

(d) For H4(s) = 2e^(-4s) / (s+3)(4s+1), the zero-state response Yzs(s) is given by:

Yzs(s) = H4(s) * E4(s) = (2e^(-4s) / (s+3)(4s+1)) * (1/(s+3))

Simplifying the expression, we have:

Yzs(s) = (2e^(-4s) / (4s+1))

To find the time-domain zero-state response yzs(t), we need to take the inverse Laplace transform of Yzs(s):

yzs(t) = L^-1{Yzs(s)} = L^-1{(2e^(-4s) / (4s+1))}

Using partial fraction decomposition and the inverse Laplace transform from problem 1, we have:

yzs(t) = L^-1{(2e^(-4s) / (4s+1))} = 0.5e^(-t/4) - 0.5e^(-3t)

Therefore, the zero-state response for each of the four LTIC systems is:

(a) Yzs(s) = (45+2), yzs(t) = 45δ(t) + 2δ(t)

(b) Yzs(s) = (45+1)E2(s), yzs(t) = (45+1)e^(t/2)u(t)

(c) Yzs(s) = ns * 542, yzs(t) = -542 δ(t)

(d) Yzs(s) = (2e^(-4s) /

To learn more about derivative visit:

brainly.com/question/30365299

#SPJ11

The value of cell ma as x can be calculated by averaging the values of the four neighboring cells of x in the von Neumann neighborhood. The von Neumann neighborhood includes the cells directly above, below, to the left, and to the right of x. Therefore, the values of these four cells are 633, 4, 9, and 281. The average of these values is (633+4+9+281)/4 = 231.75, which when rounded to the nearest integer becomes 232. Thus, the value of cell ma as x is 232.

In a diffusion simulation, the von Neumann neighborhood of a cell refers to the four neighboring cells directly above, below, to the left, and to the right of that cell. The value of a cell in the von Neumann neighborhood is an important factor in determining the behavior of the diffusion process. To calculate the value of cell ma as x, we need to average the values of the four neighboring cells of x in the von Neumann neighborhood.

The value of cell ma as x in the given grid and values is 232, which is obtained by averaging the values of the four neighboring cells of x in the von Neumann neighborhood. This calculation is important for understanding the behavior of the diffusion process and can help in predicting the future values of the cells in the grid.

To know more about diffusion simulation visit:

https://brainly.com/question/30466211

#SPJ11

To use Lagrange multipliers to find the shortest distance from the point (7, 0, −8) to the plane x y z = 1, we need to set up the following optimization problem:

Minimize the distance function D(x, y, z) = √((x-7)^2 + y^2 + (z+8)^2) subject to the constraint f(x, y, z) = x y z - 1 = 0.

Using Lagrange multipliers, we set up the following system of equations:

∇D(x, y, z) = λ∇f(x, y, z)
f(x, y, z) = 0

Taking the partial derivatives, we have:

∇D(x, y, z) = (x-7, y, z+8)
∇f(x, y, z) = (y z, x z, x y)

Setting these equal to each other and solving for x, y, z, and λ, we get:

x-7 = λ y z
y = λ x z
z+8 = λ x y
x y z = 1

Multiplying the first three equations together and using the fourth equation, we get:

(x-7)yz = λxzy = (z+8)xy
(x-7)yz = (z+8)xy
xz - 7z = yz + 8xy
xz - yz = 8xy + 7z
z(x-y) = 8xy + 7z
z = (8xy)/(y-x)

Substituting this into the equation x y z = 1, we get:

x y (8xy)/(y-x) = 1
8x^2 y - xy^2 = x^2 y - xy^2
7x^2 y = 0
x = 0 or y = 0

If x = 0, then we have yz = 1, and substituting into the equation z = (8xy)/(y-x), we get z = -8, which is not on the plane x y z = 1.

If y = 0, then we have xz = 1, and substituting into the equation z = (8xy)/(y-x), we get z = -1/8.

Therefore, the point on the plane x y z = 1 closest to the point (7, 0, −8) is (0, 0, -1/8), and the shortest distance is:

D(0, 0, -1/8) = √((0-7)^2 + 0^2 + (-1/8+8)^2) = √(49 + 63/64) ≈ 7.98.

Learn more about  Lagrange multipliers here:

https://brainly.com/question/31827103

#SPJ11

tan(θ) = √2697/899.

We know that csc(θ) = 1/sin(θ), so we can find sin(θ) by taking the reciprocal of csc(θ):

sin(θ) = 1/csc(θ) = 1/(10√3) = √3/30

Since θ is in quadrant I, both sin(θ) and cos(θ) are positive. We can use the Pythagorean identity to find cos(θ):

cos^2(θ) = 1 - sin^2(θ) = 1 - 3/900 = 899/900

cos(θ) = √(899/900)

Now we can find tan(θ) as:

tan(θ) = sin(θ)/cos(θ) = (√3/30)/(√(899/900)) = (√3/30)*(√900/√899) = √3/√899

We can rationalize the denominator by multiplying the numerator and denominator by √899:

tan(θ) = (√3/√899)*(√899/√899) = √2697/899

Therefore, tan(θ) = √2697/899.

Learn more about tan here:

https://brainly.com/question/30594361

#SPJ11

Number line with an open circle on 5 and shading to the left.

We have,

We have a baseball team that currently has 4 players and needs at least 9 players.

We want to determine the possible values for the number of additional players needed.

To represent this on a number line, we choose a specific point to start from, which in this case is 5

(since 5 additional players are needed to reach the minimum requirement).

And,

An open circle is used when a value is not included, while a closed circle is used when a value is included.

Now,

The team currently has 4 players, and it needs to have at least 9 players. This means that there need to be at least 5 additional players to meet the minimum requirement.

To represent this on a number line, we can place an open circle on 5 to indicate that it is not included as a possible value.

The shading should be to the right of 5, indicating all values greater than 5.

Therefore,

Number line with an open circle on 5 and shading to the left.

Learn more about number line here:

https://brainly.com/question/13425491

#SPJ1

The area of the rectangular region is 126 square units, with length and width of 7units and 18units respectively.

Let's denote the length of the rectangular region as L and the width as W.

Given:

Perimeter (P) = 2L + 2W = 50 units

Length of one side (L) = 7 units

Substituting the values into the perimeter equation:

2L + 2W = 50

2(7) + 2W = 50

14 + 2W = 50

2W = 50 - 14

2W = 36

W = 36 / 2

W = 18

Using the given Perimeter, the width of the rectangular region is 18 units.

To calculate the area, we use the formula:

Area = Length × Width

Area = 7 × 18 = 126 square units.

Thus, the area of the rectangular region is 126 square units.

Learn more about rectangular region here:

https://brainly.com/question/29699804

#SPJ4

Performing discrete trials is a teaching technique used in behavior analysis to teach new skills or behaviors.

It involves breaking down a complex task or behavior into smaller, more manageable steps and teaching each step through repeated trials. Each trial consists of a discriminative stimulus, a response by the learner, and a consequence (either positive reinforcement or correction) based on the accuracy of the response.

To demonstrate performing discrete trials on an initial competency assessment, the assessor would typically design a task or behavior to be learned and break it down into smaller steps. They would then present the first discriminative stimulus and prompt the learner to respond. Based on the accuracy of the response, the assessor would provide either positive reinforcement or correction.

The assessor would then repeat the process with the next discriminative stimulus and continue until all steps of the task or behavior have been completed. The number of trials required for the learner to achieve competency would depend on the complexity of the task or behavior and the learner's individual learning pace.

By demonstrating performing discrete trials on an initial competency assessment, the assessor can assess the learner's ability to learn new skills or behaviors using this technique and determine if additional training or support is needed. It also provides a standardized and objective way to measure learning outcomes and track progress over time.

To learn more about assessor visit:

brainly.com/question/29286031

#SPJ11

The power series representation for the function f(x) = x^3(x - 6)^2 is as follows: f(x) = x^5 - 12x^4 + 36x^3 - 216x^2 + 216x.

To obtain the power series representation, we expand the function using the binomial theorem and collect like terms.

First, we expand (x - 6)^2 using the binomial theorem: (x - 6)^2 = x^2 - 12x + 36.

Next, we multiply the result by x^3 to get the power series representation of the function: f(x) = x^3(x - 6)^2 = x^5 - 12x^4 + 36x^3.

We can further simplify the expression by expanding x^5 = x^3 * x^2 and collecting like terms: f(x) = x^5 - 12x^4 + 36x^3 - 216x^2 + 216x.

This power series representation expresses the function f(x) as an infinite sum of terms involving powers of x, starting from the fifth power. Each term represents a coefficient multiplied by x raised to a certain power.

It's important to note that the power series representation is valid within a certain interval of convergence, which depends on the properties of the function and its derivatives.

Learn more about power series here:

https://brainly.com/question/29896893

#SPJ11

The determinant of the given matrix is 4.

Using the first row expansion of the determinant of matrix A, we have:

det(A) = a(det A11) - b(det A12) + c(det A13)

where A11, A12, and A13 are the 2x2 matrices obtained by removing the first row and the column containing a, b, and c respectively.

We can use this formula to compute the determinant of the given matrix:

det(d e f 4a -3d 4b -3e 4c -3f -2g -2h -2i)

= d(det 4b -3f) - e(det -3d 4b -2g -2h) + f(det -3e 4a -2g -2i)

= 4bd^2 - 12bf - 4aei + 12af - 6dgh + 6dh + 6gei - 6gi

= 4bd^2 - 12bf - 4aei + 12af - 6dgh + 6dh + 6gei - 6gi

We can simplify this expression by factoring out a -2 from each term:

det(d e f 4a -3d 4b -3e 4c -3f -2g -2h -2i)

= -2(2bd^2 - 6bf - 2aei + 6af - 3dgh + 3dh + 3gei - 3gi)

Therefore, the determinant of the given matrix is equal to 2 times the determinant of the matrix obtained by dividing each element by -2:

det(2b -3d 2c -3e 2a -2g -2h -2f -2i) = -2det(b d c e a g h f i)

Since det(a) = -2, we know that det(b d c e) = -2/det(a) = 1. Therefore, the determinant of the given matrix is:

det(d e f 4a -3d 4b -3e 4c -3f -2g -2h -2i) = -2det(b d c e a g h f i) = -2(-1)(-2) = 4

To learn more about Determinant :

https://brainly.com/question/24254106

#SPJ11

The shape that has a bigger area is the regular hexagon.

The shape that has a bigger area is the regular hexagon. A hexagon is a polygon with six sides while a pentagon is a polygon with five sides. The area of a polygon measures the surface of the shape.

The polygon with six sides has a greater surface so it is expected that its area will be bigger than that of the pentagon with fewer sides.

Learn more about regular pentagons here:

https://brainly.com/question/858867

#SPJ1

The absolute value function for each graph is given as follows:

c) y = -|x| + 3.

e) y = |x + 15|.

An absolute value function of vertex (h,k) is defined as follows:

y = a|x - h| + k.

The leading coefficient for the function is given as follows:

a = 1.

For item c, the vertex has the coordinates at (0,3), and the function is reflected over the x-axis, hence it is defined as follows:

y = -|x| + 3.

For item e, the vertex has the coordinates at (15,0), hence the equation is given as follows:

y = |x + 15|.

More can be learned about absolute value functions at brainly.com/question/3381225

#SPJ1

Answer:

Step-by-step explanation:

[tex]\sqrt[3]{\frac{0.008}{0.125} }\\ =\sqrt[3]{\frac{8}{125} }\\ = \frac{2}{5}[/tex]

The missing number in the sequence is 29.

To identify the pattern and determine the missing number, let's analyze the given sequence: 7, 11, 2, 18, -7, ?

Looking at the sequence, it appears that there is no consistent arithmetic or geometric progression. However, we can observe an alternating pattern:

7 + 4 = 11

11 - 9 = 2

2 + 16 = 18

18 - 25 = -7

Following this pattern, we can continue:

-7 + 36 = 29

Among the given options, the correct answer is option E: 29, as it fits the established pattern.

for more such questions on sequence

https://brainly.com/question/30394385

#SPJ8

Answer:

Step-by-step explanation:

D

Answer:

D. g(x) = (x+2)² - 2

Step-by-step explanation:

f(x) = (x + 2)² - 7

translated 5 units right (positive) → f(x) + 5

= (x + 2)² - 7 + 5

= (x + 2)² - 2

Subject : Mathematics

Level : JHS

Chapter : Transformation (Function)

Leroy's rectangle has a length of 11.9 centimeters and a width of 7.6 centimeters.

The length is 4.3 centimeters longer than the width.

To find out how much longer the length is compared to the width, we need to calculate the difference between the length and the width. In other words, we need to subtract the width from the length of the rectangle.

Length of the rectangle: 11.9 centimeters

Width of the rectangle: 7.6 centimeters

To find the difference, we can use the following mathematical expression:

Length - Width = Difference

Substituting the values we have:

11.9 cm - 7.6 cm = Difference

To calculate this, we subtract the width from the length:

11.9 cm - 7.6 cm = 4.3 cm

Therefore, the difference between the length and the width of the rectangle is 4.3 centimeters. This means that the length is 4.3 centimeters longer than the width.

To know more about rectangle here

https://brainly.com/question/8663941

#SPJ4

The solutions of the equation in the interval [0, 2π) are x = π/6 and x = 11π/6.

The equation 2cos 3x cosx + 2 sin 3x sinx = √3 can be rewritten using trigonometric identities as cos(3x - x) = √3/2. Simplifying further, we have cos(2x) = √3/2.

In the interval [0, 2π), the solutions for cos(2x) = √3/2 occur when 2x is equal to π/6 and 11π/6. Dividing both sides by 2 gives x = π/12 and x = 11π/12.

However, we need to find solutions in the interval [0, 2r). Since r represents a number, we cannot provide a specific value for it without further information. Therefore, we express the solutions in terms of T, where T represents a positive number. The solutions in the interval [0, 2r) are x = Tπ/6 and x = (6T - 1)π/6, where T is a positive integer.

Learn more about Equation

brainly.com/question/13763238

#SPJ11

Answer:

Step-by-step explanation:

11

Answer:

(1)  [tex]\frac{3}{5}[/tex] , (2) - [tex]\frac{5}{3}[/tex]

Step-by-step explanation:

the equation of a line in slope- intercept form is

y = mx + c ( m is the slope and c the y- intercept )

given

- 5x - 3y = - 6 ( add 5x to both sides )

- 3y = 5x - 6 ( divide through by - 3 )

y = - [tex]\frac{5}{3}[/tex] x + 2 ← in slope- intercept form

with slope m = - [tex]\frac{5}{3}[/tex]

1

given a line with slope m then the slope of a line perpendicular to it is

[tex]m_{perpendicular}[/tex] = - [tex]\frac{1}{m}[/tex] = - [tex]\frac{1}{-\frac{5}{3} }[/tex] = [tex]\frac{3}{5}[/tex]

2

Parallel lines have equal slopes , then

slope of parallel line = - [tex]\frac{5}{3}[/tex]

1. The probability of making a Type I error is 0.1118.

To calculate the probability of Type I error, we need to assume that the null hypothesis is true.

In this case, the null hypothesis is that the proportion of people visiting Grant Park is 0.44.

Therefore, we can use a binomial distribution with n = 15 and p = 0.44 to calculate the probability of observing a sample proportion outside of the acceptance region (6 to 9).

The probability of observing 0 to 5 people visiting the area is:

P(X ≤ 5) = Σ P(X = k), k=0 to 5

= binom.cdf(5, 15, 0.44)

= 0.0566

The probability of observing 10 to 15 people visiting the area is:

P(X ≥ 10) = Σ P(X = k), k=10 to 15

= 1 - binom.cdf(9, 15, 0.44)

= 0.0552

The probability of observing a sample proportion outside of the acceptance region is:

a = P(Type I Error) = P(X ≤ 5 or X ≥ 10)

= P(X ≤ 5) + P(X ≥ 10)

= 0.0566 + 0.0552

= 0.1118

Therefore, the probability of making a Type I error is 0.1118.

2.The probability of making a Type II error is 0.5144.

To calculate the probability of Type II error, we need to assume that the alternative hypothesis is true. In this case, the alternative hypothesis is that the proportion of people visiting Grant Park is 0.31.

Therefore, we can use a binomial distribution with n = 15 and p = 0.31 to calculate the probability of observing a sample proportion within the acceptance region (6 to 9).

The probability of observing 6 to 9 people visiting the area is:

P(6 ≤ X ≤ 9) = Σ P(X = k), k=6 to 9

= binom.cdf(9, 15, 0.31) - binom.cdf(5, 15, 0.31)

= 0.5144

The probability of observing a sample proportion within the acceptance region is:

B = P(Type II Error) = P(6 ≤ X ≤ 9)

= 0.5144

Therefore, the probability of making a Type II error is 0.5144.

3. The power of the test is 0.4856.

The power of the test is the probability of rejecting the null hypothesis when the alternative hypothesis is true. In this case, the alternative hypothesis is that the proportion of people visiting Grant Park is 0.31.

Therefore, we can use a binomial distribution with n = 15 and p = 0.31 to calculate the probability of observing a sample proportion outside of the acceptance region (6 to 9).

The probability of observing 0 to 5 people or 10 to 15 people visiting the area is:

P(X ≤ 5 or X ≥ 10) = P(X ≤ 5) + P(X ≥ 10)

= binom.cdf(5, 15, 0.31) + (1 - binom.cdf(9, 15, 0.31))

= 0.0201

The power of the test is:

Power = 1 - P(Type II Error)

= 1 - P(6 ≤ X ≤ 9)

= 1 - 0.5144

= 0.4856

Therefore, the power of the test is 0.4856.

To know more about binomial distribution refer here:

https://brainly.com/question/29163389?#

#SPJ11

The estimated derivative of y with respect to x at x = -4 is 8.

To estimate the derivative of y with respect to x at x = -4, we can use the definition of a derivative:

dy/dx = lim(h -> 0) [f(x+h) - f(x)]/h

Plugging in the given function, we get:

dy/dx = lim(h -> 0) [(6 - (x+h)^2) - (6 - x^2)]/h
dy/dx = lim(h -> 0) [(6 - x^2 - 2xh - h^2) - (6 - x^2)]/h
dy/dx = lim(h -> 0) [-2xh - h^2]/h
dy/dx = lim(h -> 0) [-2x - h]

Now we can estimate the derivative at x = -4 by plugging in this value for x:

dy/dx x=-4 = -2(-4) = 8

Therefore, the estimated derivative of y with respect to x at x = -4 is 8.

To know more about derivative visit:

https://brainly.com/question/23819325

#SPJ11

The titration curve for a spectrometric titration of A(analyte) by adding B (titrant), the volume of B at end point is 100 ml and absobance at this point is equals to zero. So, option(c) is right one.

We have a spectrometric titration with A (analyte) B (titrant) = C + D ( products)

In the spectrophotometric titration of the colored substrat and colored titrant to produce colorless products, the absorbance is maximum intially because both the analyte and the titrant are colored. The absorbance of the solution decreases with the addition if the titrant due to the formation of the colorless products. The abosrbance becomes zero at the end point where the reaction undergoes completion and all substrate is converted into products. Then, the absorbance of the solution again increases due to the addition of the colored titrant solution. The titration curve is present in attached figure. At end point volume of B can be determined by following equation, [tex]M_A V_A = M_B V_B [/tex]

where M --> represents molarity

V --> volume

here [tex] M_A =0.001 M , M_B = 0.001 M[/tex] and [tex]V_A = 100 ml [/tex].

So, [tex]0.001 (100) = (0.001 ) V_B[/tex]

=> [tex]V_B = 100 ml[/tex]

As the products C and D are colourless, so at that point absorbance is equals to the zero. Hence, Volume 100 ml, of B is added and absorbance is zero.

For more information about volume, visit:

https://brainly.com/question/4936894

#SPJ4

The submarine is 206.5 feet below the surface of the ocean.

A submarine starts at the ocean's surface and then descends at a speed of 24.75 feet per minute for 11 minutes. The submarine stays at that position for one hour and then rises 65.75 feet. What is the current location of the submarine relative to the surface of the oceanTo calculate the current location of the submarine relative to the surface of the ocean, we will add the distance it descended, the distance it ascended, and the distance it traveled while resting.The distance traveled while descending = speed × time distance = 24.75 × 11 = 272.25 feet

The distance traveled while resting = 0 feet

The distance traveled while ascending = -65.75 feet (because it is moving up, not down)Now, to calculate the submarine's current position, we'll add these three distances:

current position = 272.25 + 0 - 65.75 current position = 206.5 feet

So, the submarine is 206.5 feet below the surface of the ocean.

To know more about submarine visit:

https://brainly.com/question/32457172

#SPJ11

False. Cast iron typically does not exhibit a yield plateau like mild steel when tested under tension.

Cast iron is more brittle and less ductile than mild steel, and its stress-strain curve has a sharp peak followed by a rapid drop in stress at failure.

To know more about Cast iron refer here:

https://brainly.com/question/29763119

#SPJ11