The figure(Figure 1) shows four sides of a 6.0cm×6.0cm×6.0cm cube.
Part A
What is the electric flux Φ1 through side 1?
Express your answer using two significant figures.
Part B
What is the electric flux Φ2 through side 2?
Express your answer using two significant figures.
Part C
What is the electric flux Φ3 through side 3?
Express your answer using two significant figures.
Part D
What is the electric fluxe Φ4 through side 4?
Express your answer using two significant figures.
Part E
What is the net flux through these four sides?
Express your answer using two signifi​cant figures.

Answers

Answer 1

The electric flux of various sides of cube are found to be - 1.558845727 N m2 , 0.9 N m2 /C, 1.558845727 N m2 /C and - 0.9 N m2 /C.

What is electric flux ?

Electric flux is a characteristic of an electric field that can be conceptualised as the quantity of electric lines of force (or electric field lines) that cross a specific region. Positive electric charges are thought to be where electric field lines begin, while negative electric charges are thought to be where they end.

What is net flux?

The total number of electric field lines that are perpendicular to the surface and crisscross it is known as net electric flux. Scalar quantity is used to represent the electric flux. D = E in mathematics.

Electric flux is nothing but the dot product between the Electric field vector and the area vector whose direction is given by the outward normal (indicated by the green arrows)

Area S = 0.06 x 0.06 = 0.0036 m2

a.)  ? = E.S = ESCos?    = 500 x 0.0036 x Cos 150 = - 1.558845727 N m2 /C  

b.)  ? = E.S = ESCos?    = 500 x 0.0036 x Cos 60 = 0.9 N m2 /C

c.)  ? = E.S = ESCos?    = 500 x 0.0036 x Cos 30 =  1.558845727 N m2 /C

d.)  ? = E.S = ESCos?    = 500 x 0.0036 x Cos 120 = - 0.9 N m2 /C

e.) Net flux through these four sides is the sum of all the fluxes through the individual sides.

? =   - 1.558845727 + 0.9 +  1.558845727  - 0.9 =  0  N m2 /C

Therefore, all the parts of questions are explained above.

Learn more about electric flux here.

brainly.com/question/2664005

#SPJ4


Related Questions

Calculate the ratio of the drag force on a passenger jet flying with a speed of 1200 km/h at an altitude of 10 km to the drag force on a prop-driven transport flying at one-fourth the speed and half the altitude of the jet. At 10 km the density of air is 0.38 kg/m3 and at 5.0 km it is 0.67 kg/m3. Assume that the airplanes have the same effective cross-sectional area and the same drag coefficient C. (drag on jet / drag on transport)

Answers

Answer:

[tex]2.267[/tex]

Explanation:

Drag force is given by

[tex]F=\dfrac{1}{2}\rho Av^2C[/tex]

C = Drag coefficient is constant

A = Area is constant

[tex]v_1[/tex] = Velocity of the passenger jet = 1200 km/h = [tex]\dfrac{1200}{3.6}\ \text{m/s}[/tex]

[tex]v_2[/tex] = Velocity of the prop plane = [tex]\dfrac{1}{4}v_1[/tex]

[tex]\rho_1[/tex] = Density of the air where the jet was flying = [tex]0.38\ \text{kg/m}^3[/tex]

[tex]\rho_2[/tex] = Density of the air where the prop plane was flying = [tex]0.67\ \text{kg/m}^3[/tex]

[tex]F\propto \rho v^2[/tex]

[tex]\dfrac{F_1}{F_2}=\dfrac{\rho_1 v_1^2}{\rho_2 v_2^2}\\\Rightarrow \dfrac{F_1}{F_2}=\dfrac{0.38 v_1^2}{0.67 (\dfrac{1}{4}v_1^2)}\\\Rightarrow \dfrac{F_1}{F_2}=2.267[/tex]

The ratio of the drag forces is [tex]2.267[/tex].

How far can a bus carrying small children, travel at a rate of 60 km per hour travel in 2 1/2 hours?

Answers

150km

Explanation:

speed = 60km/hr.time = 2¹/2 hr = 5/2 hrdistance = speed × time = 60 ×5/2 = 150km

MARK ME AS BRAINLIST

How long will it take an object traveling at 90 kilometers per hour to travel 910 kilometers?

Answers

Explanation:

time = distance / velocity

We know that distance = 910 km and velocity = 90 km/h.

t = d / v

t = 910 km / 90 km/h

t = 10.11 hrs

The object traveled for 10.11 hours long. Hope this helps, thank you !!

Which one of Newton’s Laws best explains a bottle flip?

Answers

Answer:

the 2nd law-

Hope this helps <3

Explanation:

Explain the difference in the function of plant and animal cell organelles, including cell membrane, cell wall, nucleus, cytoplasm, mitochondria, chloroplast, and vacuole

Answers

Answer:

Plant cell Animal cell

2. Have a cell membrane. 2. Have no chloroplasts.

3. Have cytoplasm. 3. Have only small vacuoles.

4. Have a nucleus. 4. Often irregular in shape.

5. Often have chloroplasts

containing chlorophyll. 5. Do not contain plastids.

How can you drop two eggs the fewest amount of times, without them breaking?

Answers

Because the shell didn’t crack.

I hope this helps.

Answer:

get 2 jugs of water put an egg in each one drop the jugs with parachutes on them in long grass on a sunny non windy day

Explanation:

egg+ground=broken

egg-ground= egg+air

egg+air=unbroken

egg+water= egg+wet

egg+water= unbroken

egg+egg= 2 egg

egg+egg+air= egg+egg+unbroken+unbroken

egg+egg+unbroken+unbroken=(egg+unbroken)2

longgrass+egg= 40%unbroken+60broken+egg

longgrass+egg+egg=20%unbroken+80%broken+2egg

ground+water=mud

mud+egg=unbroken+egg+muddy

air+water=raining

egg+raining+air=wet+egg+slip+50%broken+50%unbroken

ask if need more proof

Dereck is looking at how electrically charged objects can attract other objects without touching. What control would he need to use?

An electrically charged object
An uncharged object
A positively charged object
A negatively charged object

Answers

Answer:

its An uncharged object.

if its not charged the electrically wont go on it

Answer:

uncharged object

Explanation:

Mischievous Joey likes to play with his family's lazy susan (this drives Mom crazy because it is an antique). He puts the salt shaker near the edge and tries to spin the tray at a speed so that the shaker just barely goes around without slipping off. Joey finds that the shaker just barely stays on when the turntable is making one complete turn every two seconds. Joey's older sister measures the mass of the shaker to be 79 grams. She also measures the radius of the turntable to be 0.23 m, and she is able to calculate that the speed of the shaker as it successfully goes around in a circle is 0.7222 m/s.

Required:
What is the magnitude of the horizontal part of the contact force on the shaker by the turntable?

Answers

Answer:

0.179 N

Explanation:

What is the magnitude of the horizontal part of the contact force on the shaker by the turntable?

The horizontal part of the constant force of the turntable on the shaker is the centripetal force of the turntable on the shaker, F.

So, F = mv²/r where m  = mass of shaker = 79 g = 0.079 kg, v = speed of shaker = 0.7222 m/s and r = radius of turntable = 0.23 m

So, substituting the values of the variables into the equation, we have

F = mv²/r

F = 0.079 kg (0.7222 m/s)²/0.23 m

F = 0.0412 kgm/s² ÷ 0.23 m

F = 0.179 kgm/s²

F = 0.179 N

attraction is seen between the poles of two bar magnet in the case of​

Answers

Answer:

he magnetic field of a bar magnet is strongest at either pole of the magnet. It is equally strong at the north pole when compared with the south pole. The force is weaker in the middle of the magnet and halfway between the pole and the center

Explanation:

help please due today ​

Answers

Answer:

equal and opposite

Explanation:

..........

You are driving a car behind a truck. Both your car and the truck are moving at a speed of 80km/hr. If the driver of the truck suddenly slams on the brakes, what minimum distance betweenyour car and the truck is needed so that your car does not crash into the truck’s rear end? (This is called the "​minimum trailing distance​".) To simplify this problem, assume that the truck andthe car have the same braking acceleration.

a. In order to simplify the calculations for this problem, you are told to assume that the braking acceleration of the car and the truck are the same. What other reasonable assumptions do you need to make in order to solve this problem?
b. For both the truck and the car, draw an acceleration- and velocity-versus-time graph.
c. Find an expression for the minimum trailing distance. (Your expression should only contain symbols of physical quantities. No numbers are needed here.)
d. Find the numerical value for the minimum trailing distance (Plug the values of physical quantities into your expression from part A (do not forget units!))

Answers

Answer:

Explanation:

Let the velocity of car and truck be u and breaking acceleration be a .

We shall have to assume the reflex time of the driver of the car . By the time he applies brake , his car will cover some distance . There will be some time tag between the time the truck starts decelerating and the driver of the car responding to that . During this period the car will not start decelerating . It will keep on moving with uniform velocity of u .

Let this time lag be t .

b )

For answer see the attached file

c )

The minimum trailing distance will be the distance covered by car before it starts decelerating in response to truck's deceleration .

minimum trailing distance d = u x t

d )  u = 80 km / h = 22.22 m /s

reflex action time t = 0.1 s  ( assumed time )

d = 22.22 x .1

= 2.2 m

Which of the following statements is true?
A. Friction primarily affects objects that contain iron.
B. Friction pulls objects toward the center of the Earth
C.
Friction does not affect objects in motion.
D.
Friction slows down or stops objects in motion.

Answers

Answer:

D. Friction slow down or stop objects in motion.

Q5. Use Superposition to V. in the circuit below? (5 points)
4 mA
12V
2 ΚΩ
2 mA
1 ΚΩ
2 ΚΩ

Answers

Answer:

4va

12va

2jk

1jk

2jk

Which of the following does NOT have a positive impact on your position on the
health continuum?
avoiding risk behaviors
having a positive social environment
eating nutritious foods
O having a chronic disease

Answers

Answer:

Having a chronic disease

Explanation:

who is bill cypher and what is his origin?

Answers

Answer:

Bill Cipher is the true main antagonist of Gravity Falls. He is a Dream-Demon with mysterious motives and seems to have a vendetta against the Pines family, especially his old rival Stanford Pines

Explanation:

What is the acceleration of an object going from O m/s to 25 m/s in 5s?

Answers

Answer:

5m/s^2 is the acceleration.

Answer:

[tex]\boxed {\boxed {\sf a= 5 \ m/s^2}}[/tex]

Explanation:

Acceleration is the change in speed over time.

[tex]a=\frac{ v_f-v_i}{t}[/tex]

The object accelerates from 0 meters per second to 25 meters per second in 5 seconds.

[tex]v_f= 25 \ m/s\\v_i= 0 \ m/s \\t= 5 \ s[/tex]

Substitute the values into the formula.

[tex]a=\frac{ 25 \ m/s -0 m/s }{ 5 \ s}[/tex]

Solve the numerator.

[tex]a=\frac{25 \ m/s}{5 \ s}[/tex]

Divide

[tex]a= 5 \ m/s/s= 5 \ m/s^2[/tex]

The object's acceleration is 5 meters per square second.

Communication satellites are placed in a geosynchronous orbit, i.e., in a circular orbit such that they complete one full revolution about the earth in one sidereal day (23.934 h), and thus appear stationary with respect to the ground. Determine the altitude of these satellites above the surface of the earth in both SI and U.S. customary units.

Answers

Answer:

Explanation:

Let the radius of orbit of geostationary satellite be R .

Time period of satellite = 2πR / V₀ where V₀ is orbital velocity

T = 2πR / √gR

T= 2πR / √(GM / R )

T = 2πR¹°⁵ / √GM  

R¹°⁵ = T x √GM  / 2π

T = 23.934 h = 23.934 x 60 x 60 s = 86126.4 s

R¹°⁵ = 86126.4 x √ ( 6.67 x 10⁻¹¹ x 5.972 x 10²⁴ )  / 2π

= 86126.4 x √ ( 398.33 x 10¹²  )  / 2π

= 86126.4 x 19.95 x 10⁶  / 2π

= 273.428 x 10⁹

R = 42.92 x 10⁶ m

= 42920 km

Radius of orbit = 42920 km

radius of earth = 6370 km

Altitude of satellite = 42920 - 6370 = 36550 km .

In US customary unit = 36550 x 10³ /.9144 yards

= 36550 x 10³ /(.9144 x 1760 ) miles

= 22771 miles .

Bartender slides a beer mug at 1.1 m/s towards a customer at the end of the bar which is 1.8 m tall. The customer makes a grab for the mug and misses and mug sails at the end of the bar. a) How far away from the end of the bar does the mug hit the floor

Answers

Answer:

Δx = 0.7 m

Explanation:

Once the mug is moving in the horizontal direction, it keeps moving at the same speed of 1.1 m/s, due to no other force acts on it in this direction.Since the horizontal and vertical movements are independent each other (due to they are mutually perpendicular), in the vertical direction, the initial speed is just zero.In the vertical direction, the mug is accelerated by the force of gravity at all times, with a constant value of 9.8 m/s2, aimed downward.So, we can use the following kinematic equation in order to get the time passed from the instant that the mug left the bar, until it hit the floor, as follows:[tex]\Delta y = \frac{1}{2} * g* t^{2} = (1)[/tex]where  Δy = 0-1.8m = -1.8m, g= -9.8m/s2.Replacing these values in (1) and solving for t, we get:

       [tex]t = \sqrt{\frac{2*1.8m}{ 9.8m/s2} } = 0.6 s (2)[/tex]

Now, since the mug obviously finishes its horizontal trip at this same time (hitting ground), we can find the horizontal distance traveled, just applying the definition of average speed, as follows:

       [tex]\Delta x = v_{o} * t = 1.1 m/s* 0.6 s = 0.7 m (3)[/tex]

pls help me this is a major SOS pls help pls btw this is IXL

Answers

Explanation:

the object with the higher temperature has greater thermal energy

So the answer is

the stick of butter with less thermal energy.

Hope it will help :)

Answer:

The stick of butter with less thermal energy

Explanation:

I am pretty sure

Suppose one Sherpa uses a force of 980 N to move a load of equipment to a height of 20 meters in 25 seconds. How much power is used?

Answers

F = 980 N

h = 20 m

t = 25 s

P=? (power)

W=F*h   (work)

P=W*t  

P=F*h*t

P=980*20*25 =490000 W = 490 kW = 0.49 MW

A vertical wire carries a current straight up in a region of the magnetic field directed north. What is the direction of the magnetic force on the current due to the magnetic field

Answers

Answer:

The direction of the force on the vertical wire is towards the East or right.

Explanation:

Using Fleming's right hand rule, the current is the middle finger pointing straight up, the magnetic field is the fore-finger pointing Northwards and then the thumb is the direction of the force on the vertical wire.

Following these conventions, the thumb points towards the East. So, the direction of the force on the vertical wire is towards the East or right.

PLZZZZ HELPPPPPPPPPppppp​

Answers

What grade are you in?!!??

You are trying to push a 30 kg canoe across a beach to get it to a lake. Initially, the canoe is
at rest, and you exert a force over a distance of 3 m until it has a speed of 1.2 m/s.

a. How much work was done on the canoe?

b. The coefficient of kinetic friction between the canoe and the beach is 0.2. How much work was done by friction on the canoe?

c. How much work did you perform on the canoe?

d. What force did you apply to the canoe?

Answers

Answer:

m = 30, g = 9.8, coefficient = 0.2, so force due to friction = 30 x 9.8 x 0.2 = 58.8 N, so work done by friction = 58.8 x 1.2 = 70.56 J

Explanation:

Concept Simulation 4.1 reviews the central idea in this problem. A boat has a mass of 4490 kg. Its engines generate a drive force of 4520 N due west, while the wind exerts a force of 890 N due east and the water exerts a resistive force of 1210 N due east. Take west to be the positive direction. What is the boat's acceleration, with correct sign

Answers

Answer:

-0.54m/s²

Explanation:

According to Newton's second law of motion

F = ma

Force = mass * acceleration

Given

Mass m = 4490kg

Take the sum of forces

Sum of force along the east = 890+1210 = 2100N

Sum of forces along the west = -4520N

Net force = -4520+2100

Net force = -2420N

Acceleration = Net force/Mass

Acceleration = -2420/4490

Acceleration = -0.54m/s²

Hence the boat acceleration is -0.54m/s²

If you stand on a trampoline, it depresses under your weight. When you stand on a hard stone floor, __________. If you stand on a trampoline, it depresses under your weight. When you stand on a hard stone floor, __________. the floor deforms very slightly under your weight only if you are heavy enough does the floor deform at all under your weight the floor does not deform at all under your weight

Answers

Answer:

the floor deforms very slightly under your weight

Explanation:

A trampoline is made up of a large piece of strong cloth held by springs on which you jump up and down as a sport. So, If you stand on a trampoline, it depresses under your weight.  However, the floor does not deform under your weight as it is too stiff.

Therefore,

when you stand on a hard stone floor, the floor deforms very slightly under your weight.

Two students are on a balcony a distance h above the street. One student throws a ball vertically downward at a speed vi; at the same time, the other student throws a ball vertically upward at the same speed. Answer the following symbolically in terms of vi, g, h, and t. (Take upward to be the positive direction.)
(a) What is the time interval between when the first ball strikes the ground and the second ball strikes the ground?
?t = ______
(b) Find the velocity of each ball as it strikes the ground.
For the ball thrown upward vf = ______
For the ball thrown downward vf = ______
(c) How far apart are the balls at a time t after they are thrown and before they strike the ground?
d = _______

Answers

Answer:

Explanation:

 a )

Time for first ball to reach top position

v = u - gt

0 = vi - gt

t = vi / g

Time to reach balcony  while going downwards

= vi /g

Total time = 2 vi / g

Time to go down further to the ground = t₁

Total time = 2 vi / g + t₁

Time for the other ball to go to the ground = t₁

Time difference = ( 2 vi / g + t₁ ) - t₁

= 2vi / g .

( b )

v² = u² + 2gh

For both the throw ,

final displacement = h , initial velocity downwards = vi

( For the first ball also  , when it go down while passing the balcony , it acquires the same velocity vi but its direction is downwards.)

vf² = vi² + 2gh

vf = √ ( vi² + 2gh )

(c )

displacement of first ball after time t

s₁ = - vi t + 1/2 g t²  [ As initial velocity is upwards , vi is negative ]

displacement of second ball after time t

s₂ = vi t + 1/2 g t²

Difference = d =  s₂ - s₁

= vi t + 1/2 g t² - ( - vi t + 1/2 g t² )

d = 2 vi t .

Displacement vector A points due east and has a magnitude of 1.9 km. Displacement vector B points due north and has a magnitude of 2.08 km. Displacement vector C points due west and has a magnitude of 2.4 km. Displacement vector D points due south and has a magnitude of 2.8 km. Find the magnitude and direction (relative to due east) of the resultant vector A + B + C + D

Answers

Answer:

Explanation:

We shall represent all the four displacement in vector form  in terms of unit vector i and j where i represents unit vector towards east , j represents unit vector towards north .

Displacement of A

D₁ = 1.9 i

Displacement of B

D₂ = 2.08 j

Displacement of C

D₃ = - 2.4 i

Displacement of D

D₄ = -2.8 j

Resultant displacement

= 1.9 i + 2.08 j - 2.4 i - 2.8 j

= - 0.5 i - 0.72 j

magnitude of resultant vector

= √ ( .5² + .72² )

=√ ( .25 + .5184 )

= √ .7684

= .876 km

Both i and j are negative of resultant displacement

hence its direction is towards south of west . Angle with west is Ф .

TanФ = .5184 / .25 = 2.0736

Ф = 64.25° .

From east direction is  = 180 + 64.25 = 244.25° .

2. (9 points) A car starts from 10 mph and accelerates along a level road, i.e., no grade change. At 500 ft from its starting point, a radar gun measures its speed as 50 mph. Assuming the car had a constant rate of acceleration, (a) calculate the time elapsed between when the car started at 10 mph to when its speed was measured and (b) what will the speed of the car be another 500 ft downstream of this point

Answers

Answer:

a) t = 11.2 s

b) v = 70.5 mph

Explanation:

a)

Since we need to find the time, we could use the definition of acceleration (rearranging terms) as follows:

       [tex]t = \frac{v_{f} - v_{o}}{a} (1)[/tex]

where vf = 50 mph, and v₀ = 10 mph.However, we still lack the value of a.Assuming that the acceleration is constant, we can use the following kinematic equation:

       [tex]v_{f} ^{2} - v_{o} ^{2} = 2*a* \Delta x (2)[/tex]

Since we know that Δx = 500 ft, we could solve (2) for a.In order to simplify things, let's first to convert v₀ and vf from mph to m/s, as follows:

       [tex]v_{o} = 10 mph*\frac{1609m}{1mi} *\frac{1h}{3600s} = 4.5 m/s (3)[/tex]

       [tex]v_{f} = 50 mph*\frac{1609m}{1mi} *\frac{1h}{3600s} = 22.5 m/s (4)[/tex]

We can do the same process with Δx, from ft to m, as follows:

       [tex]\Delta x = 500 ft *\frac{0.3048m}{1ft} = 152.4 m (5)[/tex]

Replacing (3), (4), and (5) in (2) and solving for a, we get:

       [tex]a = \frac{v_{f} ^{2} - v_{o}^{2}}{2*\Delta x} = \frac{(22.5m/s) ^{2} - (4.5m/s)^{2}}{2*152.4m} = 1.6 m/s2 (6)[/tex]

Replacing (6) in (1) we finally get the value of the time t:

        [tex]t = \frac{v_{f} - v_{o}}{a} = \frac{(22.5m/s) - (4.5m/s)}{1,6m/s2} = 11.2 s (7)[/tex]

b)

Since the acceleration is constant, as we know the displacement is another 500 ft (152.4m), if we replace in (2) v₀ by the vf we got in a), we can find the new value of vf, as follows:

       [tex]v_{f} = \sqrt{v_{o} ^{2} +( 2*a* \Delta x)} = \sqrt{(22.5m/s)^{2} + (2*1.6m/s2*152.4m)} \\ v_{f} = 31.5 m/s (8)[/tex]

If we convert vf again to mph, we have:

       [tex]v_{f} = 31.5m/s*\frac{1mi}{1609m} *\frac{3600s}{1h} = 70.5 mph (9)[/tex]

Someone help please

Answers

Answer:

it would be downwards due to gravitational force

A boat is moving in a river with a current that has speed vW with respect to the shore. The boat first moves downstream (i.e. in the direction of the current) at a constant speed, vB , with respect to the water. The boat travels a distance D in a time tOut . The boat then changes direction to move upstream (i.e. against the direction of the current) at a constant speed, vB , with respect to the water, and returns to its original starting point (located a distance D from the turn-around point) in a time tIn .
1) What is tOut in terms of vW, vB, and D, as needed?
2) What is tIn in terms of vW, vB, and D, as needed?
3) Assuming D = 120 m, tIn = 170 s, and vW = 0.3 m/s, what is vB, the speed of the boat with respect to the water?
4) Once again, assuming D = 120 m, tIn = 170 s, and vW = 0.3 m/s, what is tOut, the time it takes the boat to move a distance D downstream?

Answers

Answer:

Explanation:

Current  has speed vW with respect to the shore and boat has speed vB with respect to water or current so speed of boat  with respect to shore

vW + vB .

Distance travelled with respect to shore by boat = D

time ( tout ) = distance / speed with respect to shore

tOut = D / ( vW + vB )

When the boat travels upstream , its velocity with respect to shore

= ( vB - vW ) , vB must be higher .

tin = D /  ( vB - vW )

3 ) tin = D /  ( vB - vW )

170 = 120 / (vB - 0.3 )

(vB - 0.3 ) = 12 / 17 = .706

vB = 1.006 m / s

4 )

tOut = D / ( vW + vB )

= 120 / ( .3 + 1.006 )

= 92.26 s

Time taken by a body is ratio of the distance traveled by it to the speed.

1)The expression for [tex]t{out}[/tex] is,

          [tex]t_{out}=\dfrac{D}{v_B+v_W}[/tex]

2)The expression for [tex]t{in}[/tex] is,

           [tex]t_{in}=\dfrac{D}{v_B-v_W}[/tex]

3) The speed of the boat with respect to the water is 1.006 m/s. 4) The time it takes the boat to move a distance D downstream is 91.9 seconds.

What is upstream and downstream speed?

The net speed of the boat is upstream speed. The difference of the speed of the boat is downstream speed.

Given information-

The speed of the boat with respect to shore is [tex]v_w[/tex].

The speed of the boat in downstream with respect to water is [tex]v_B[/tex].

The distance traveled by the boat is [tex]D[/tex] in time [tex]t_{out}[/tex].

Time taken by a body is ratio of the distance traveled by it to the speed.

1) The net speed of the boat is upstream speed.As the distance traveled by the boat is [tex]D[/tex] in time [tex]t_{out}[/tex]. Thus,

        [tex]t_{out}=\dfrac{D}{v_B+v_W}[/tex]

2) The difference of the speed of the boat is downstream speed.As the distance traveled by the boat is [tex]D[/tex] in time [tex]t_{in}[/tex]. Thus,

        [tex]t_{in}=\dfrac{D}{v_B-v_W}[/tex]

Now the distance is 120 m, the value of [tex]t_{in}[/tex] is 170 s and [tex]v_W[/tex] 0.3 m/s. Thus,

3) The speed of the boat with respect to the water-Put the values in the formula obtains from the 2nd part of the problem,

         [tex]170=\dfrac{120}{v_B-0.3}\\v_B-0.3=\dfrac{120}{160} \\v_B=0.706+0.3\\v_B=1.006[/tex]

Hence the speed of the boat with respect to the water is 1.006 m/s.

4) The time it takes the boat to move a distance D downstream-Put the values in the formula obtains from the 1st part of the problem,

          [tex]t_{out}=\dfrac{120}{1.006+0.3}\\t{out}=\dfrac{120}{1.306} \\t{out}=91.9[/tex]

Hence the time it takes the boat to move a distance D downstream is 91.9 seconds.

Thus,

1)The expression for [tex]t{out}[/tex] is,

          [tex]t_{out}=\dfrac{D}{v_B+v_W}[/tex]

2)The expression for [tex]t{in}[/tex] is,

           [tex]t_{in}=\dfrac{D}{v_B-v_W}[/tex]

3) The speed of the boat with respect to the water is 1.006 m/s. 4) The time it takes the boat to move a distance D downstream is 91.9 seconds.

Learn more about the upstream and downstream speed here;

https://brainly.com/question/800251

Other Questions
what was the impact of big businesses on the politics in America during the gilded age? Consider the decomposition of gaseous N2O4:N2O4(g)?2NO2(g) ?H? = +55.3 kJ, ?S? = +175.7 J/K. Estimate the temperature at which the reaction becomes spontaneous.Show work i just need to know how to calculate this, my method isnt working. Help with question 3 A pitcher applies an average force of 6.2 N in the forward direction on a baseball for 0.65 seconds. The baseballs mass is 0.145 kg. and initial velocity is zero. What momentum does the baseball have as it is released by the pitcher? How fast is the baseball going after the impulse? The catcher catches the baseball in the problem above. It takes 0.15 seconds to stop the ball. How much average force must the catcher apply during that time interval? (Ignore air resistance.) How does a dictatorship affect 3 aspects of society? Explain your answer With philosopher do you agree with most?Why? Hobbes, Locke, Montesquieu,Rousseau What happens to resources when population increases? Dante deposits $300 to open a savings account. He will earn 2% interest each year on hismoney If he makes no deposits or withdrawals, how much money will Dante earn in interestin 1 year? How much money will be in the account after 4 years? What is individualism in Romanticism? Annie loved the first novel she read by Danielle Steel. Ms. Steel has just published a new novel, and it got great reviews. Therefore, it is likely that Annie would like that novel too.Is this argument inductive or deductive?If it is inductive, is it strong or weak?If it is deductive, is it valid or invalid? Lian wants to place wood flooring in his rectangular-shaped laundry room with the dimensionsshow below. How much flooring does Lian need? What message is the author trying to convey in An Occurrence at Owl Creek Bridge? Michael and Ashley each buy x pounds of turkey and y pounds of ham. Turkey costs $3 per pound at Store A and $4.50 per pound at Store B. Ham costs $4 per pound at Store A and $6 per pound at Store B. Michael spends $18 at Store A, and Ashley spends $27 at Store B. Could Michael and Ashley have bought the same amount of turkey and ham?please help me please my school essay in twi How many grams of lioh are needed to make 100 ml of a 0.1 m solution? Termites have the unusual ability to eat wood.Why are termites able to eat wood?ResponsesA. Microorganisms prepare the wood before termites eat it.B. Microorganisms break down wood in the gut of a termite.C. Termites are close relatives of trees and other plants.D. Termites have strong mouthparts that can bite and chew wood.Question 2. Which statement best describes a healthy ecosystem?ResponsesA. Microorganisms are either absent or present in very small numbers.B. New kinds of plants and animals arrive every year.C. Plants and animals of many kinds are able to meet their needs.D. One kind of animal grows in number every year.The feathers of a parrot keep it dry and comfortable in the rainforest. However, the feathers do not protect a parrot from cold temperatures.Could a parrot survive in a very cold environment, such as winter in a temperate forest?ResponsesA. No. The parrot could not live in the trees of a temperate forest.B. Yes. The parrot would develop new adaptations to keep its body warm.C. Yes. The parrot would grow thicker feathers.D. No. The parrot could not meet its need for staying warm.Question 3 Which statement best describes a healthy ecosystem?ResponsesA. Microorganisms are either absent or present in very small numbers.B. New kinds of plants and animals arrive every year.C. Plants and animals of many kinds are able to meet their needs.D. One kind of animal grows in number every year. Do Liabilities represent an "inside" interest in a business what is the hybridization of nitrogen in each of the following ions and molecules? pls help me in this exercise One reason abolitionists were unpopular with many northerners from the 1830s to 1860 was because the abolitionists.