Answer:
The equilibrium constant change. For an endothermic reaction, heat is a reactant. An increase in temperature and heat favors the forward reaction and the value of Kc increases.
Explanation:
Hello.
In this case, regarding reactions in equilibrium in which heat is a reactant as those exemplified by:
[tex]Heat+Reactants \rightleftharpoons Products[/tex]
We infer that the heat of reaction is positive since the reactants have more energy in their ground state than the products making them endothermic. Moreover, since the Le' Chatelier's principle states that increasing the reaction temperature in endothermic reactions, the forward reaction (towards products) is favored because endothermic reactions absorb heat in the form temperature raise, the required statement is:
The equilibrium constant change. For an endothermic reaction, heat is a reactant. An increase in temperature and heat favors the forward reaction and the value of Kc increases.
Regards.
Answer:
The equilibrium constant increases. For an endothermic reaction heat is a reactant. An increase in temperature and heat favours the forward reaction and the value of KC increases.
Explanation:
How many molecules are there in 985 mL of nitrogen at 0.0 degrees C and 1.00x10^-6 mm Hg?
(It would be better if work or steps to solve problem are given but if not its fine).
Answer:
3.48 x 1013 N2 molecules
step-by-step explanation:
Lets set up our equation first
P = 1.00 x 10-6 mm Hg T = 0.0° C + 273 = 273 K
We are given the V = 985 mL ,
R = 0.0821 L·atm/mol·K
Now use the ldeal gas law, but we are solving n, amount of substanvce
PV = nRT, we will change this equation to ;
n = PV/RT
n = 1.00 x 10-6 mm x 1 atm/760 mm x 985 mL x 1 L/103
mL/
(0.0821 L·atm/mol·K x 273 K) = 5.78 x 10-11 moles N2
nmolecules = 5.78 x 10-11 moles N2 x 6.02 x 1023 N2 molecules/1 mol N2
The specific heat of silver is 0.235 J/gx °C. How much heat is needed to raise the temperature of an 8-gram silver ring by 50°C
Answer:
Heat needed to increase the temperature by 50°C is 94 j.
Explanation:
Given data:
Specific heat of silver = 0.235 j/g.°C
Heat needed to increase temperature = ?
Mass of silver = 8 g
Temperature difference = ΔT= 50°C
Solution:
Formula:
q = mcΔT
c = specific heat capacity of substance
Now we will put the values i formula.
q = 8 g× 0.235 J/g.°C× 50°C
q = 94 J
Heat needed to increase the temperature by 50°C is 94 j.
Describe the changes and challenges that today’s immigrant children experience
Explanation:
It can be a demanding undertaking to reach adulthood as the offspring of mothers who immigrated to america. In the u.s, something many see as a land of opportunities relative to the world they left behind, parents frequently place heavy pressure on their kids to excel.
These same relatives can know only conjectural English, whereas their offspring rapidly become fluent, requiring the children to take on adult roles as parents need to connect with outside the environment of the family.
Which of the following correctly lists the five atoms in order of increasing size (smallest to
largest)?
O, F, Mg, S, Ba
Answer:
F - O - S - Mg - Ba
Explanation:
as you move left to right on the periodic table the number of electrons increase.
The correct lists of the five atoms in order of increasing size smallest to
largest is :
D) F - O - S - Mg - Ba
Atomic RadiusThe correct lists of the five atoms in order of increasing size smallest to
largest is F - O - S - Mg - Ba.
The atomic radius of a chemical element may be a degree of the measure of its molecule, as a rule the mean or commonplace remove from the center of the core to the furthest isolated electron.
The arrange will be:
Fluorine(F) (50 pm)Sulfur(S) (100 pm) Magnesium(Mg) (150 pm) Barium(Ba) (215 pm)As you move cleared out to right on the periodic table the number of electrons increment.
Learn more about "Atomic Radius":
https://brainly.com/question/11960714?referrer=searchResults
23994Pu + 10n → BCBa + 9138Sr + 3 10n
B=??
a
150
b
100
c
140
d
146
Answer:
the answer to this question is c 140
You need to make an aqueous solution of 0.192 M barium sulfide for an experiment in lab, using a 500 mL volumetric flask. How much solid barium sulfide should you add?
Answer:
Explanation:
Molecular weight of barium sulphide = 169
500 mL of .192 M barium sulfide = .5 x .192 moles of barium sulphide
= .096 moles of barium sulfide
= .096 x 169 gram of barium sulfide
= 16.22 grams of barium sulfide .
We shall have to add 16.22 gram .
Electrolysis of water produces its constituent elements, hydrogen and oxygen. This process is represented by the following balanced chemical equation:
2 H2O(l) → 2 H2(g) + O2(g).
If 8.05 grams of oxygen gas was produced in the reaction, how many molecules of water were decomposed?
Do enter the coefficient of the answer only. Do NOT include the unit in final answer.
_______________________________ × 1023 H2O molecules.
Answer:
3.011 × 10²³
Explanation:
Given data:
Mass of oxygen produced = 8.05 g
Molecules of water decomposed = ?
Solution:
Balance chemical equation:
2H₂O → 2H₂ + O₂
Number of moles of oxygen produced:
Number of moles = mass/molar mass
Number of moles = 8.05 g/ 32 g/mol
Number of moles = 0.25 mol
Now we will compare the moles of water with oxygen.
O₂ : H₂O
1 : 2
0.25 : 2×0.25 =0.5 mol
0.5 moles of water were decomposed.
Molecules of water decomposed:
1 mole = 6.022× 10²³ molecules of water
0.5 mol ×6.022× 10²³ molecules of water/ 1mol
3.011 × 10²³ molecules of water
In a fluorine atom, on which energy level are the valence electrons found?
Answer:
second energy level
Explanation:
Valence electrons are those electrons which are present in outer most orbital of the atom.
This can be easily found through the electronic configuration of atom.
Electronic configuration of F:
F₉ = 1s² 2s² 2p⁵
We can see that the valence electrons are present in second energy level of F atom.
There are seven valence electrons of fluorine.
It is called halogens.
Halogens are very reactive these elements can not be found free in nature. Their boiling points also increases down the group which changes their physical states. i.e fluorine is gas while iodine is solid.
Fluorine:
1. it is yellow in color.
2. it is flammable gas.
3. it is highly corrosive.
4. fluorine has pungent smell.
5. its reactions with all other elements are very vigorous except neon, oxygen, krypton and helium.
sulphur is non metal why
Answer:
Sulfur is characterized as a non-metal because it is consistent with the 3 physical properties listed for nonmetals. It is a poor conductor of heat and electricity because the electrons are not free to move.
Explanation:
HELP ME ASAP!
Under the Law of Multiple Proportions, Carbon Dioxide has a ratio of 2.666 g
Oxygen for every 1 g Carbon. Given this, how much oxygen is present in a sample
of carbon dioxide that has 16 g of carbon?
Answer:
In carbon dioxide, on the right, there is 2.666 g of oxygen for every gram of carbon. So the ratio of oxygen in the two compounds is 1:2, a small whole number ratio
please mark me as the brainliest answer and please please pleaseeee follow me.
the coefficient of 02 is needed to balance the equation C3h8+O2+3co2+4H20
Answer:The anwser is 5
Explanation:
What is the predictable process in which one element type is converted into a new form?Immersive Reader
(10 Points)
A. Law of Superposition
B. Igneous formation
C. Fossil formation
D. Radioactive decay
Answer:
Radioactive decay
Explanation:
Answer:
D. Radioactive decay
Explanation:
What is magma?
solid rock with a fine texture
cooled rock with large crystals
molten rock below Earth’s surface
flowing rock above Earth’s surface
Answer:
C. molten rock below Earth’s surface
Explanation:
7. The equation below represents a chemical reaction that occurs in living cells.
CH,26 + 602
6CO2 + 6H,0 + energy
How many atoms are represented in the reactants of this equation?
A=6
B=12
C=24
D=36
Answer:
D
Explanation:
Because i just added all of numbers up
C. 24 if the zero after the 6H, is supposed to be a zero however if it wasnt and u were trying to say h2o it'd be 36
Calculate the pH of a solution containing a caffeine concentration of 455 mg/L . Express your answer to one decimal place.
Answer:
Explanation:
Caffeine is a weak base with pKb = 10.4
Kb = 10⁻¹⁰°⁴ = 3.98 x 10⁻¹¹
molecular weight of caffeine = 194.2
455 x 10⁻³ g / L = 455 x 10⁻³ / 194.2 moles / L
concentration of given solution a = 2.343 x 10⁻³ M
Let the caffeine be represented by B .
B + H₂O = BH + OH⁻
a - x x x
x² / ( a - x ) = Kb
x² / ( a - x ) = 3.98 x 10⁻¹¹
x is far less than a so a -x is almost equal to a
x² = 3.98 x 10⁻¹¹ x 2.343 x 10⁻³ = 9.32 x 10⁻¹⁴
x = 3.05 x 10⁻⁷
[ OH⁻ ] = 3.05 x 10⁻⁷
pOH = - log ( 3.05 x 10⁻⁷ )
= 7 - log 3.05
= 7 - 0.484 = 6.5
pH = 14 - 6.5 = 7.5
The pH of 455 mg/L of caffeine is 7.5
Using the formula;
Mass concentration = molar concentration × molar mass
Molar mass of caffeine = 194 g/mol
Mass concentration of caffeine = 455 mg/L
Molar concentration = Mass concentration/molar mass
Molar concentration = 455 × 10^-3g/L/194 g/mol
= 0.00235 M
Let Caffeine by depicted by the general formula BH
We can now set up the ICE table as follows;
:B + H2O ⇄ BH + OH^-
I 0.00235 0 0
C - x +x +x
E 0.00235 - x x x
Note that water is present in large excess
Again; pKb of caffeine =10.4
Kb = Antilog[-pKb]
Kb = Antilog [-10.4]
Kb = 3.98 × 10^-11
Kb = [BH] [OH^-]/[:B]
3.98 × 10^-11 = [x] [x]/[ 0.00235 - x ]
3.98 × 10^-11 [ 0.00235 - x ] = [x] [x]
9.4 × 10^-14 - 3.98 × 10^-11x = x^2
x^2 + 3.98 × 10^-11x - 9.4 × 10^-14 = 0
x = 3.1 × 10^-7 M
Recall [BH] = [OH^-] = 3.1 × 10^-7 M
Now;
pOH = - log [OH^-]
pOH = log [3.1 × 10^-7 M]
pOH = 6.5
But;
pH + pOH = 14
pH = 14 - pOH
pH = 14 - 6.5
pH = 7.5
The pH of 455 mg/L of caffeine is 7.5
Learn more: https://brainly.com/question/10038290
Missing parts
Caffeine (C8H10N4O2) is a weak base with a pKb of 10.4. Calculate the pH of a solution containing a caffeine concentration of 455 mg/L.
3.54 millilelvin = ? kelvin
________ and ________ fibres are obtained from animals
Answer:
Explanation:
Silk and wool
Answer:
silk and wool fibers are obtained from animals
Explanation:
good luck :)
A chemist prepares a solution of silver(II) oxide by measuring out 0.0013 of silver(II) oxide into a 100 mL volumetric flask and filling the flask to the mark with water. Calculate the concentration in of the chemist's silver(II) oxide solution. Be sure your answer has the correct number of significant digits.
Answer:
1.3x10⁻⁸ mol/L
Explanation:
0.0013μmol, Calculate concentration in mol/L
To obtain concentration in mol/L we need to convert the μmoles to moles and mL to liters:
Moles silver(II) oxide:
0.0013μmol × (1mol / 1x10⁶μmol) = 1.3x10⁻⁹ moles
Liters solution:
100mL * (1L / 1000mL) = 0.1L
That means concentration in mol/L is:
1.3x10⁻⁹ moles / 0.1L =
1.3x10⁻⁸ mol/L
2. What is the purpose of subscripts?
3. What is the difference between monatomic and polyatomic ions?
4. How do the names of monatomic anions end?
5. When are Roman numerals used in cation names ?
2. Chemical formulas are used to describe the types of atoms and their numbers in an element or compound. The atoms of each element are represented by one or two different letters. When more than one atom of a specific element is found in a molecule, a subscript is used to indicate this in the chemical formula.
3. The main difference between monatomic and polyatomic ions is that monatomic ions are composed of single atoms whereas polyatomic ions are composed of two or more atoms per ion.
4. These are nonmetal elements which have accepted extra electrons. These ions are relatively few in number and are listed below. Monatomic anions are named by taking the root of the element name and applying an -ide ending. Other important simple anions.
5. This is indicated by assigning a Roman numeral after the metal. The Roman numeral denotes the charge and the oxidation state of the transition metal ion. For example, iron can form two common ions, Fe2+ and Fe3+. To distinguish the difference, Fe2+ would be named iron (II) and Fe3+ would be named iron (III).
what is the chimestry
A sailor on a trans-Pacific solo voyage notices one day that if he puts 375. mL of fresh water into a plastic cup fresh water weighing 15.0 g, the cup floats in the seawater around his boat with the fresh water inside the cup at exactly the same level as the seawater outside the cup.
Required:
Calculate the amount of salt dissolved in each liter of seawater.
Answer:
Amount of salt dissolved in each liter of seawater = 40 g
Explanation:
According to Archimedes principle, a body will float in a fluid if the upthrust experienced by a body is equal to the to the weight of the body.
Also, the volume of seawater displaced equals the volume of freshwater in the cup.
From the above principle, since the freshwater and cup floats in the seawater, their combined weight equals the upthrust.
Therefore, mass of equal volume of displaced seawater = mass of freshwater + mass of cup
Mass of freshwater = density of freshwater * volume
density of freshwater = 1 g/mL; volume = 375 mL
mass of freshwater = 375 mL * 1 g/mL = 375 g
mass of seawater = 375 + 15 = 390 g
mass of salt in 375 mL seawater = mass of seawater - mass of freshwater
mass of salt = (390 - 375) g = 15 g
Since 15 g of salt are dissolved in 375 mL seawater, mass of salt in 1 L of seawater =(1000 mL/ 375) * 15g = 40 g
Therefore, amount of salt dissolved in each liter of seawater = 40 g
Scientists are experimenting with pure samples of isotope X which is radioactive. The sample has a mass of 20. Grams. The half-life was measured to be 232 seconds. There is a second sample that weighs 80 grams. What is the half-life of the second sample
Answer:
Explanation:
Half life of radioactive materials do not depend upon the mass of the material . It only depends upon the nature of radioactive materials . The half life of 20 g is 232 seconds . That means 20 gram will be reduced to 10 gram in 232 seconds .
Half life of 80 gram is also 232 seconds . So , 80 gram will be reduced to 40 gram in 232 second .
experiment to determine the
ity of a free-falling object. Data
are presented in the table.
If the accepted value of acceleration due to gravity is
9.8 m/s2, how would you describe Clara's data?
Measurement
O precise but not accurate
accurate but not precise
both accurate and precise
neither accurate nor precise
9.3 m/s2
7.3 m/s2
7.5 m/s2
8.9 m/s2
Ok
i’m so lost please help
C=4
D=-19
Explanation:
2exp-25/5exp-7= 4exp-19
Please tell me the answers to A, B, and C
Answer:
A=element
B=compond
C=solution
If 20.0 g of NaOH is added to 0.750 L of 1.00 M Cd(NO₃)₂, how many grams of Cd(OH)₂ will be formed in the following precipitation reaction?
2 NaOH(aq) + Cd(NO₃)₂(aq) → Cd(OH)₂ (s) + 2 NaNO₃(aq)
Answer:
[tex]m_{Cd(OH)_2}=36.6 gCd(OH)_2[/tex]
Explanation:
Hello.
In this case, for the given chemical reaction, in order to compute the grams of cadmium hydroxide that would be yielded, we must first identify the limiting reactant by computing the yielded moles of that same product, by 20.0 grams of NaOH (molar mass = 40 g/mol) and by 0.750 L of the 1.00-M solution of cadmium nitrate as shown below considering the 1:2:1 mole ratios respectively:
[tex]n_{Cd(OH)_2}^{by\ NaOH}=20.0gNaOH*\frac{1molNaOH}{40gNaOH} *\frac{1molCd(OH)_2}{2molNaOH} =0.25molCd(OH)_2\\\\n_{Cd(OH)_2}^{by\ Cd(NO_3)_2}=0.750L*1.00\frac{molCd(NO_3)_2}{L}*\frac{1molCd(OH)_2}{1molCd(NO_3)_2} =0.75molCd(OH)_2[/tex]
Thus, since 20.0 grams of NaOH yielded less of moles of cadmium hydroxide, NaOH is the limiting reactant, therefore the mass of cadmium hydroxide (molar mass = 146.4 g/mol) is:
[tex]m_{Cd(OH)_2}=0.25molCd(OH)_2*\frac{146.4gCd(OH)_2}{1molCd(OH)_2} \\\\m_{Cd(OH)_2}=36.6 gCd(OH)_2[/tex]
Best regards.
The mass of Cd(OH)₂ that would be formed is 36.6 g
From the question,
We are to determine the mass of Cd(OH)₂ that would be formed
The given balanced chemical equation for the reaction is
2NaOH(aq) + Cd(NO₃)₂(aq) → Cd(OH)₂ (s) + 2NaNO₃(aq)
This means
2 moles of NaOH reacts with 1 mole of Cd(NO₃)₂ to produce 1 mole of Cd(OH)₂ and 2 moles of NaNO₃
Now, we will determine the number of moles of each reactant present
For NaOHMass = 20.0 g
Molar mass = 39.997 g/mol
From the formula
[tex]Number\ of\ moles = \frac{Mass}{Molar\ mass}[/tex]
Number of moles of NaOH present = [tex]\frac{20.0}{39.997 }[/tex]
Number of moles of NaOH present = 0.50 mole
For Cd(NO₃)₂Volume = 0.750 L
Concentration = 1.00 M
From the formula
Number of moles = Concentration × Volume
∴ Number of moles of Cd(NO₃)₂ present = 1.00 × 0.750
Number of moles of Cd(NO₃)₂ present = 0.750 mole
Since,
2 moles of NaOH reacts with 1 mole of Cd(NO₃)₂
Then,
0.5 mole of NaOH will react with 0.25 mole of Cd(NO₃)₂
∴ The number of moles of Cd(NO₃)₂ that reacted is 0.25 mole
Now,
From the balanced chemical reaction
2 moles of NaOH reacts with 1 mole of Cd(NO₃)₂ to produce 1 mole of Cd(OH)₂
Then,
0.5 mole of NaOH will react with 0.25 mole of Cd(NO₃)₂ to produce 0.25 mole of Cd(OH)₂
∴ Number of moles of Cd(OH)₂ formed is 0.25 mole
Now, for the mass of Cd(OH)₂ that would be formed
From the formula
Mass = Number of moles × Molar mass
Molar mass of Cd(OH)₂ = 146.43 g/mol
∴Mass of Cd(OH)₂ formed = 0.25 × 146.43
Mass of Cd(OH)₂ formed = 36.6075 g
Mass of Cd(OH)₂ formed≅ 36.6 g
Hence, the mass of Cd(OH)₂ that would be formed is 36.6 g
Learn more here: https://brainly.com/question/12886687
Which of the following molecules may show a pure rotational microwave absorption spectrum: (i) H2, (ii) HCl, (iii) CH4, (iv) CH3Cl, (v) CH2Cl2?
Answer:
Explanation:
H₂ , HCl , CH₃Cl , CH₂Cl₂ ---- Yes
CH₄ ------ No .
Symmetric molecules do not have rotational microwave absorption spectrum because they do not possess permanent dipole moment so they lack polarisability .
The pure rotational microwave absorption spectrum has been possessed by HCl and [tex]\rm \bold{CH_3Cl}[/tex].
Pure rotational microwave absorption has been consisted of the molecules having dipole and polarizability. The molecules that show the spectrum and dipole are diatomic molecules, linear molecules, spherical molecules.
(i) The hydrogen has been a diatomic molecule with symmetry thus not showing a pure rotational microwave absorption spectrum.
(ii) The HCl being a linear molecule possesses a pure rotational microwave absorption spectrum.
(iii) [tex]\rm CH_4[/tex] molecule has symmetry, thus will not possess a pure rotational microwave absorption spectrum.
(iv) [tex]\rm CH_3Cl[/tex] molecule has no symmetry, and thus possesses a pure rotational microwave absorption spectrum.
(v) [tex]\rm CH_2Cl_2[/tex] molecule with the presence of symmetry, thus lacks a pure rotational microwave absorption spectrum.
For more information about the pure rotational microwave absorption spectrum, refer to the link:
https://brainly.com/question/14215380
How does temperature affect the copper (II) chloride equilibrium? Is the forward reaction (color changing from blue to green) endothermic or exothermic? Justify your choice with experimental evidence i.e color changes in the video for Part B.
Answer:
See explanation
Explanation:
A popular experiment that describes the effect of heat on the position of equilibrum is the change of colour when copper II chloride is heated.
As the solution is heated, it's colour changes from blue to green, this implies the the colour change (blue to green) is an endothermic process (equilibrum position shifts to the right with increase in temperature)
The equilibrum is represented by the equation;
[Cu(H2O)6]^2+(aq) + 4Cl^-(aq)<------>[CuCl4]^2-(aq) + 6H2O(l) ∆H=positive
The equilibrium mixture undergoing cooling or heating have colour changes. The temperature affects the colour of the products formed and the forward reaction is endothermic.
What are the equilibrium and the forward reactions?In the reaction copper (II) chloride or [tex]\rm CuCl_{4}[/tex] is the main species. The heat or the temperature affects the colour formation of copper (II) chloride as the equilibrium change affects the colouration of the product.
The heating of the solution affects the colour change from blue to the green of the reactant to products and the forward reaction shifts the equilibrium towards the right when the temperature is increased and is an endothermic reaction.
The reaction at the equilibrium can be shown as,
[tex]\rm [Cu(H_{2}O)_{6}]^{2+} (aq) + 4Cl^{-} (aq) \Leftrightarrow [CuCl_{4}]^{2-}(aq) + 6H_{2}O(l), \Delta H=positive[/tex]
Therefore, temperature changes the colouration and the forward reaction is an endothermic reaction.
Learn more about temperature and equilibrium here:
https://brainly.com/question/13356990
Which of the three crowns was made of gold? Explain:
Answer:
I need more context. Maybe add a picture.
Explanation:
Answer:
Crown B
Explanation:
because the density of gold is 19.3 and the density of the crown is 19.29.
When you balance the equation of the reaction of cobalt chloride and sodium carbonate reacting to form cobalt carbonate and sodium chloride, the sum of the coefficients for all the products and reactants is equal to ___?
Answer:
5
Explanation:
According to this question, the chemical reaction is between Cobalt chloride (CoCl2) and sodium carbonate (Na2CO3) to produce Cobalt carbonate (CoCO3) and sodium chloride (NaCl).
The chemical equation is as follows:
CoCl2 + Na2CO3 ---> CoCO3 + NaCl
However, this equation is not balanced and needs to be with the use of coefficients. The balanced equation is:
CoCl2 + Na2CO3 ---> CoCO3 + 2NaCl
The sum of coefficients on the reactants side is 2 while the sum of coefficients on the product side is 3, hence, the total sum of all products and reactants is 5
In the balanced equation of the reaction of cobalt chloride and sodium carbonate reacting to form cobalt carbonate and sodium chloride, the sum of the coefficients for all the products and reactants is equal to 5.
What is a balanced equation?A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total charge is the same for both the reactants and the products.
We will balance it using the trial and error method.
Step 1. Write the unbalanced equation.CoCl₂ + Na₂CO₃ ⇒ CoCO₃ + NaCl
Step 2. Balance Cl and Na atoms.We have 2 Cl atoms on the left and 1 Cl atom on the right. The same happens for Na. Thus, we can get the balanced equation by multiplying NaCl by 2.
CoCl₂ + Na₂CO₃ ⇒ CoCO₃ + 2 NaCl
The sum of the coefficients for all the products and reactants is:
1 + 1 + 1 + 2 = 5
In the balanced equation of the reaction of cobalt chloride and sodium carbonate reacting to form cobalt carbonate and sodium chloride, the sum of the coefficients for all the products and reactants is equal to 5.
Learn more about balancing equations here: https://brainly.com/question/17679209