The equation of damped oscillations is given in the form x=0.05e^-0.25sin½πt (m). Find the velocity of an oscillating point at the moments of time: 0, T, 2T, 3T and 4T.​

Answer:

[tex]5,2[/tex]

Explanation:

From the question we are told that:

Speed of light [tex]C=3.0×10^8 m/s.[/tex]

Generally the equation for Average Speed is mathematically given by

[tex]V_{avg}=\frac{d}{t}[/tex]

Where

d=Distance between the Earth and the sun

[tex]d=1.5*10^11m[/tex]

Therefore

[tex]t=\frac{d}{V_{avg}}[/tex]

[tex]t=\frac{1.5*10^11m}{3.0×10^8 m/s.}[/tex]

[tex]t=5*10^2s[/tex]

Since m and n is given in the form of

[tex]m*10^n[/tex]

Therefore

[tex]m=5 & n=2[/tex]

[tex]5,2[/tex]

Answer:

B.

Explanation:

sana makatulong sayo

Answer:

We need, mass, gravity and height.

Explanation:

When a body falls freely from a height, its initial velocity is zero, but due to the height it has some potential energy at the top and the kinetic energy is zero.

As it falls, the potential energy is gradually converted in to the kinetic energy so that the total energy of the falling body is conserved.

At the time as the body strikes the ground, the entire potential energy is converted into the kinetic energy.

Potential energy is given by

U = m g h

where, m is the mass, g is the gravity and h is the height,

So, to get the kinetic energy we require mass, gravity and height of the body.

Built by 1800, it was the home of inventor Jethro Wood (1774-1834), whose 1819 invention of an iron moldboard plow revolutionized American agriculture.

Answer:

4.02×10⁻⁴ K⁻¹

Explanation:

Applying,

γ = (v₂-v₁)/(v₁Δt)................. Equation 1

Where γ  = coefficient of volume expansion, v₂ = Final volume, v₁ = initial volume, Δt = change in temperature.

From the question,

Given: v₂ = 850 m³, v₁ = 830 m³, Δt = (90-30) = 60°C

Substitute these values into equation 1

γ  = (850-830)/(830×60)

γ  = 20/(830×60)

γ  = 4.02×10⁻⁴ K⁻¹

I’m assuming you meant latitude:

The angular distance north or south of the earth's equator, measured in degrees along a meridian, as on a map or globe.

a region based on its distance to the equator uses latitude measurements

basically: up and down , north to south from a certain point

Answer:

Alleles AA and aa

Explanation:

For all the offsprings of the butterflies to have the same heterozygous alleles Aa, it means the two parents have different homogyzous alleles. That is, one of the parents had the alleles AA while the other had the alleles aa. Thus, a combination of the two pairs of alleles will produce 100% Aa alleles in the offspring as seen in the image attached.

Answer: A 10,000-Hz sound is 10 times more intense as compared to a 1000-Hz sound to be perceived as equal to 60 phons of loudness.

Explanation:

The formula used is as follows.

[tex]\beta = 10 dB log (\frac{I}{I_{o}})\\60 = 10 dB log (\frac{I}{I_{o}})[/tex]

[tex]I_{o} = 10^{-12}[/tex] normal threshold

The difference is sound level is as follows.

60 - 60 = 0

Hence,

[tex]0 = 10 dB [log (\frac{I_{f}}{I_{o}}) - log (\frac{I_{i}}{I_{o}})]\\log (\frac{1000}{I_{o}}) = log (\frac{10000 x}{I_{o}})\\log (10^{15}) = log (10^{16}x)\\15 = 16 + log x\\log x = 1\\x = 10[/tex]

This means that 10,000 Hz sound is 10 times more intense.

Thus, we can conclude that a 10,000-Hz sound is 10 times more intense as compared to a 1000-Hz sound to be perceived as equal to 60 phons of loudness.

Answer:

160 meters

Relative of speed Vr = 10 -2 = 8 m/s    (horizontal speed)

20 sec * 8 m/s = 160 m      since ball travels 20 sec

Answer:

160 meters

Explanation:

Answer:

kinetic

Explanation:

i just remember it from last year

Answer:

kinetic energy

Explanation:

expression for kinetic energy is

kinetic energy = (1/2) × mass × (velocity)^2

so , as velocity increases K.E increases

Answer:

B = 4.51×10⁻⁵ T

Explanation:

Given that,

The average magnetic field strength of the Earth is 0.0000451 T.

We need to write the value in the form of scientific notation. Any number in scientific notation is written as follows :

N=a×bⁿ

Where

n is any integer and a is a real no

So,

0.0000451 = 4.51×10⁻⁵ T

So, the required answer is equal to 4.51×10⁻⁵ T.

Answer:

False

Explanation:

Though fiber active cable is based on the concept of internal reflection but it is achieved by refractive index which transmit data through fast traveling pulses of light. It has a layer of glass and insulating casing called “cladding,”and this is is wrapped around the central fiber thereby causing light to continuously bounce back from the walls of the Cable.

Answer:

hey. i dont know what you tryna say but if u replying to someone else, you should use the comments section. in that way you won't lose points.

Answer:pp

Explanation:

ii

Answer:

sorry dear

Explanation:

sorry dear but ur question is hard to understand can u try to edit it so i can tell u the answer?

Answer:

Coefficient of friction =  Magnitude depends on the interacting materials

Friction = A force that acts parallel to the surface.

kinetic friction = A force that is constant regardless of the applied force

Normal = A force that acts perpendicular to the surface

Static friction = A force that increases as applied force increases up to some maximum value

Explanation:

Let's define all the forces, and then let's solve the problem.

Normal force:

When an object rests on some place (like a book on the table) the force that causes the book to not fall through the table is called the normal force, which is usually equal to the weight of the object and acts perpendicular to the surface where the object is resting.

Friction force.

When an object moves (or tries to move) parallel to a surface, such that the object is in contact with that surface, there appears a force that opposes to the movement (the force is parallel to the surface, and in the opposite direction to the movement).

And this force can be written as:

F = -N*μ

Where μ is the coefficient of friction and N is the normal force.

If the object is not moving yet (but there is applied a force that would move the object) the coefficient is called the coefficient of static friction which increases in a given range, until it can't keep increasing and the object starts to move, while if the object is moving, the coefficient is called the coefficient of kinetic friction and it is constant, where usually the first one is larger than the second, and these coefficients depend on both materials, the surface one and the object one.

Then we have two friction forces, one called the kinetic friction and the other called the static friction.

Then:

Coefficient of friction =  Magnitude depends on the interacting materials

Friction = A force that acts parallel to the surface.

kinetic friction = A force that is constant regardless of the applied force

Normal = A force that acts perpendicular to the surface

Static friction = A force that increases as applied force increases up to some maximum value

When we exhale, 90% waste material is Carbon Dioxide ( CO2 ) , so, it gets exhaled out in the form of CO2 rich air and it gets removed from the body, therefore our internal body becomes more pure and helps in making our internal temperature constant at a suitable level.

1) (40 N) cos(30°) ≈ 34.6 N

2) (40 N) sin(30°) = 20 N

3) (65 kg) g = (65 kg) (9.80 m/s²) = 585 N

4) The net force on the sled acting in the vertical direction is made up of

• the sled's weight, 585 N, pointing downward

• the vertical component of the applied force, 20 N, pointing upward

• the normal force, with magnitude n, also pointing upward

The sled does not move up or down, so by Newton's second law,

∑ F = n + 20 N - 585 N = 0   ==>   n = 565 N

5) The net force in the horizontal direction consists of

• the horizontal component of the applied force, 34.6 N, acting in the direction the sled's movement (call this the positive direction)

• kinetic friction, with magnitude f, pointing in the opposite and negative direction

By Newton's second law,

∑ F = 34.6 N - f = 0   ==>   f ≈ 34.6 N

Now if µ is the coefficient of kinetic friction, then

f = µn   ==>   µ = f/n = (34.6 N) / (565 N) ≈ 0.0613

The component of the force is the effective part of that force in that direction.

The component of the force is the effective part of that force in that direction.

1) The horizontal component of a force = 40 N cos 30 degrees = 34.6 N

2) The vertical component of the force = 40 N sin 30 degrees = 20 N

3) The magnitude of the gravitational force = mg cos 30 degrees  = 65 Kg * 9.8 m/s^2 * cos 30 degrees = 551.7 N

4) The normal force = 551.7 N

5) The coefficient of friction = F/R =  40 N /551.7 N = 0.07

Learn more about component of a force:https://brainly.com/question/15529350

#SPJ6

Answer:

D. Centripetal Force :)

Answer:

A. the motion of electrically charged particles

Answer:

(a) The acceleration is 2.35 m/s^2.

(b) The time is 5.53 s.

Explanation:

coefficient of friction = 0.24

(a) The acceleration of the car is

[tex]a =\mu g\\\\a = 0.24 \times9.8\\\\a = 2.35 m/s^2[/tex]

(b) initial velocity, u =0, final velocity, v = 13 m/s

Let the time is t.

Use first equation of motion

v = u + a t

13 = 0 + 2.35 x t

t = 5.53 seconds

Answer:

The output electric power is 1338876 W.

Explanation:

Volume, V = 690 cubic meter

height, h = 220 mm = 0.22 m

efficiency = 90 %

time , t = 1 s

Let the mass is m.

m = volume x density  

m = 690 x 1000 = 690000 kg

The input power is

P = m g h = 690000 x 9.8 x 0.22 = 1497640 W

The electric power out put is

[tex]P' = 90 % of 1487640\\\\\\P' = 1338876 W[/tex]

Answer:

3.86×10⁶ Newton/coulombs

Explaination:

Applying,

E = F/q....................... Equation 1

Where E = Electric Field, F  = Force, q = charge.

From the question,

Given: F = 5.4×10⁻¹ N, q = -1.4×10⁻⁷ coulombs

Substitute these values into equation 1

E = 5.4×10⁻¹/ -1.4×10⁻⁷

E = -3.86×10⁶ Newtons/coulombs

Hence the magnitude of the electric field created by the

negative test charge is 3.86×10⁶ Newton/coulombs

Answer:

When the blood passes into the smaller branches, its average velocity reduces by a factor of 0.12

Explanation:

Given;

initial area of the artery, A₁ = 1.3 cm²

Area of each smaller 18 arteries, a₂ = 0.6 cm²

Total area of the smaller 18 arteries, A₂ = 18 x 0.6 cm²

Apply flow rate equation;

Q = AV

where;

Q is the flow rate of the blood

V is the average velocity of the blood

If the flow rate is constant, then;

A₁V₁ = A₂V₂

[tex]V_2 = \frac{A_1V_1}{A_2} = \frac{1.3\times V_1}{18\times 0.6} \\\\V_2 = 0.12 \ V_1[/tex]

When the blood passes into the smaller branches, its average velocity reduces by a factor of 0.12

Answer: Mean weight = 2.81 N and  Measurement of uncertainty = 0.82 N

Explanation:

Mean =  [tex]\dfrac{\text{Sum of observations}}{\text{number of observations}}[/tex]

Mean weight is [tex]($\mu)=\frac{2.8+2.6+2.9+3.1+2.4+2.9+3.2+2.5+2.7+3.0}{10}[/tex]

[tex]=2.81$[/tex]

[tex]$\sum_{i=1}^{10}\left(x_{i}-\mu\right)^{2}=0.61[/tex]

[tex]$\sigma=\sqrt{\frac{1}{N-1} \sum_{i=1}^{10}\left(x_{i}-\mu\right)^{2}}[/tex]

[tex]=\sqrt{\frac{1}{10-1} 0.61}=0.082$[/tex]

Measurement of uncertainty will be  [tex]$\sigma=0.082$[/tex]  

hence,  Weight [tex]$W=2.81 \pm 0.082 N$[/tex]

Answer:

[tex]E=6.68\times 10^{-26}\ J[/tex]

Explanation:

Given that,

The frequency of FM ratio station, f = 100.8 MHz = 100.8 × 10⁶ Hz

We need to find the energy of the wave. We know that,

Energy, E = hf

Put all the values,

[tex]E=6.63\times 10^{-34}\times 100.8\times 10^6\\\\=6.68\times 10^{-26}\ J[/tex]

So, the energy of the wave is equal to [tex]6.68\times 10^{-26}\ J[/tex].

Let g be the acceleration due to gravity on the surface of the star. By Newton's second law, the gravitational force felt by the object has a magnitude of

F = GMm/r ² = mg

where

• G = 6.67 × 10⁻¹¹ Nm²/kg² is the gravitational constant,

• M = 2.08 × 10³⁰ kg is the mass of the star,

• m is the unknown mass of the object, and

• r = 6.73 × 10³ m is the radius of the star

Solving for g gives

g = GM/r ²

g = (6.67 × 10⁻¹¹ Nm²/kg²) (2.08 × 10³⁰ kg) / (6.73 × 10³ m)²

g ≈ 3.06 × 10¹² m/s²

The object is in free fall with uniform acceleration and starting from rest, so its speed after falling 0.0093 m is v such that

v ² = 2g (0.0093 m)

v = √(2g (0.0093 m))

v ≈ 240,000 m/s ≈ 240 km/s

Answer:

The speed of the combined mass after the collision is 2.1 m/s.

Explanation:

mass of runner, m = 70 kg

speed  of runner, u = 2.7 m/s

mass of shortstop, m' = 85 kg

speed  of shortstop, u' = 1.6 m/s

Let the velocity of combined system is v.

Use conservation of momentum

Momentum before collision = momentum after collision

m u + m' u' = (m + m') v

70 x 2.7 + 85 x 1.6 = (70 + 85) v

189 + 136 = 155 v

v = 2.1 m/s

Answer:

In the above diagram, we move by horizontally with a velocity to the right. But due to gravity the hand falls a distance as we move .

Therefore the time it takes to fall by a distance is given by =.

If = as →∞, then from the laws of motion

=12()22

Therefore for the whole journey from left to right our muscle has to give a beat up at an amount equal to the gravity force. So, the work supplied by the muscle for one trip would be

∫=∫012()22

A man is going to rub the chalk off a blackboard, he is going to choose a way to rub off the chalk in two ways

Starting from the upper left corner of the board and moving horizontally to the right and moving slightly down and then again moving to the right and then when it reaches the left corner and so on

The second way is given in the following: He starts at the top and rubs down and then up again and so on.

He is going to choose the way that is less tiring in his arms. i.e., less work done by his muscles!

Somehow from vague intuitive notion I am inclined to agree that it would be less tiring to rub off the chalk if he moves the duster beginning at the top and rubbing horizontally and gradually decreasing the height when one reach the corners till everything is off.

I tried to calculate the muscle work by considering the following ideas(please correct me if I'm wrong):

The nerves inside our muscle has to fire its signal continuously throughout the entire interval of the process of rubbing and its has to oppose the gravitational force keeping the hand up the air.

When the hand is at the highest point on the blackboard, the muscle has to work against gravity =, as the muscle continues to work against gravity throughout the interval from left to right (the horizontal path of the first case) I couldn't find the total work withstood by our muscle.