The equation i= ;δv / r is called __________.

The series converges for values of x such that |x-4| < 1, since the series for ln(1+x) converges for |x| < 1.

To find the Maclaurin series for f(x) = ln(x-4), we can use the formula for the Maclaurin series of ln(1+x), which is:

ln(1+x) = ∑ n=1[infinity] ((-1)^ⁿ⁺ / n) * xⁿ

We can apply this formula by replacing x with (x-4), which gives us:
ln(x-3) = ln(1 + (x-4)) = ∑ n=1[infinity] ((-1)^(n+1) / n) * (x-4)ⁿ

Therefore, the Maclaurin series for f(x) = ln(x-4) is:
f(x) = ∑ n=1[infinity] ((-1)^ⁿ⁺¹ / n) * (x-4)ⁿ

This series converges for values of x such that |x-4| < 1, since the series for ln(1+x) converges for |x| < 1.

Know more about the Maclaurin series here:

https://brainly.com/question/29652576

#SPJ11

The number of accessories which yields the same profit is about 3.45 million

Let's denote the number of accessories produced, in millions, as x.

The price charged for each accessory is given by the equation = 100 - 10x²

cost to make each accessory = $10.

The profit can be calculated by subtracting the cost from the revenue:

Profit = (Price - Cost) * Number of Accessories Produced

Profit = (100 - 10x² - 10) * x

Profit = (90 - 10x²) * x

We know that when the company produces 2 million accessories (x = 2), the profit is $100 million. We can use this information to set up an equation and solve for x:

(90 - 10x²) * x = 100

Expanding the equation:

90x - 10x³ = 100

Rearranging the terms:

10x³ - 90x + 100 = 0

Now we can solve this cubic equation to find the value(s) of x.

Using numerical approximation methods, we find that one of the solutions to this equation is x ≈ 3.446million (approximately 3.45 million).

Therefore, the number of accessories produced that yields the same profit as when the company produces 2 million accessories is approximately 3.45 million accessories.

Learn more on approximation : https://brainly.com/question/30164833

#SPJ4

The Taylor polynomials t2(x) and t3(x) centered at x=4 for f(x)=ln(x+1) are:

t2(x) = ln(5) + (x-4)/(5) - ((x-4)^2)/(50)

t3(x) = ln(5) + (x-4)/(5) - ((x-4)^2)/(50) + ((x-4)^3)/(150)

The general formula for the Taylor polynomial of degree n centered at a for a function f(x) is:

t_n(x) = f(a) + f'(a)(x-a)/1! + f''(a)(x-a)^2/2! + ... + f^n(a)(x-a)^n/n!

To find the Taylor polynomials t2(x) and t3(x) for f(x) = ln(x+1) centered at x=4, we need to evaluate the function and its derivatives at x=4.

f(4) = ln(5)

f'(x) = 1/(x+1), so f'(4) = 1/5

f''(x) = -1/(x+1)^2, so f''(4) = -1/25

f'''(x) = 2/(x+1)^3, so f'''(4) = 2/125

Using these values, we can plug them into the general formula and simplify to get:

t2(x) = ln(5) + (x-4)/(5) - ((x-4)^2)/(50)

t3(x) = ln(5) + (x-4)/(5) - ((x-4)^2)/(50) + ((x-4)^3)/(150)

Therefore, the Taylor polynomials t2(x) and t3(x) centered at x=4 for f(x)=ln(x+1) are ln(5) + (x-4)/(5) - ((x-4)^2)/(50) and ln(5) + (x-4)/(5) - ((x-4)^2)/(50) + ((x-4)^3)/(150), respectively.

For more questions like Polynomial click the link below:

https://brainly.com/question/11536910

#SPJ11

The measure of the arc is:

x = 120°

The arc of a circle is the part or segment of the circumference of a circle. A straight line drawn by connecting the two ends of the arc is called chord of a circle.

Check the attached image for labeling.

y = 180° (semicircle)

The measure of inscribed angle is half the measure of its intercepted arc. That is:

30° = 1/2 * U

U = 2 * 30

U = 60°

x = 360 - U - y  (sum of angles in a circle is 360°)

x = 360 - 60 - 180

x = 120°

Learn more about arcs on:

brainly.com/question/31105144

#SPJ1

Answer: X = 2, and Y = 1.

Step-by-step explanation:

To solve this system of equations, we can use the substitution method. We can solve for one variable in one equation and substitute that expression into the other equation. Then we can solve for the remaining variable.

From the first equation, we can solve for y:

y = 6x - 11

Now we can substitute this expression for y in the second equation:

2x + 3y = 7

2x + 3(6x - 11) = 7

Simplifying this equation, we get:

2x + 18x - 33 = 7

20x = 40

x = 2

Now we can use this value of x to find y:

y = 6x - 11

y = 6(2) - 11

y = 1

Therefore, the solution to the system of equations is (2, 1).

Answer:

x=2

y=1

Step-by-step explanation:

The domain of the function f(x) = log_b(x) in interval notation is (0, +∞). The range of the function depends on the base b.

The domain of the logarithmic function f(x) = log_b(x) is determined by the requirement that the argument of the logarithm, x, must be positive. Since the logarithm is undefined for zero and negative numbers, the domain excludes these values. Therefore, the domain is expressed in interval notation as (0, +∞), where the parentheses indicate that zero is not included and the positive infinity symbol indicates that the domain extends indefinitely towards positive numbers.

The range of the logarithmic function depends on the base b. If the base b is greater than 1, the function can output any real number as the exponent increases or decreases, leading to a range of (-∞, +∞), covering all possible real numbers. However, if the base b is between 0 and 1, the logarithmic function only outputs negative numbers. As the exponent increases or decreases, the value of the logarithm approaches negative infinity, resulting in a range of (-∞, 0). This signifies that the range consists of all negative real numbers, but does not include zero or positive numbers.

Learn more about functions here;

https://brainly.com/question/31062578

#SPJ11

Answer:

x = -8

Step-by-step explanation:

3.2 - 1/2(x + 4) = 4.8x + 2 - 5.2x

3.2 - 0.5x - 2 = - 0.4x + 2

1.2 - 0.5x = -0.4x + 2

1.2 - 0.1x = 2

-0.1x = 0.8

x = -8

Answer: 6.8 = 1.6

Step-by-step explanation:

3.2-1/2 (+4)                         4.8+2-5.2

2.8+4                                   6.8-5.2

6.8                      =                    1.6

To find the gradient vector of the function f(x, y) = x^2y at the point (1, -2), we need to compute the partial derivatives of f with respect to x and y and evaluate them at the given point. The partial derivative of f with respect to x is obtained by treating y as a constant and differentiating x^2 with respect to x, giving 2xy.

The partial derivative of f with respect to y is obtained by treating x as a constant and differentiating xy with respect to y, giving x^2. Therefore, the gradient vector of f at (1, -2) is given by:∇f(1, -2) = [2xy, x^2] evaluated at (x, y) = (1, -2)
∇f(1, -2) = [2(1)(-2), 1^2] = [-4, 1]
So, the gradient vector of f at the point (1, -2) is [-4, 1]. This vector points in the direction of the steepest increase in f at (1, -2), and its magnitude gives the rate of change of f in that direction. Specifically, if we move a small distance in the direction of the gradient vector, the value of f will increase by approximately 4 units for every unit of distance traveled. Similarly, if we move in the opposite direction of the gradient vector, the value of f will decrease by approximately 4 units for every unit of distance traveled.

Learn more about vector here

https://brainly.com/question/25705666

#SPJ11

The likelihood equation for X1,…,Xn i.i.d. from the Logistic(θ,1) distribution has a unique root.

For i.i.d. samples from the Logistic distribution, the likelihood equation has a unique root, implying that the maximum likelihood estimator (MLE) is unique. This result holds regardless of the sample size n.

To find the MLE for θ, we differentiate the log-likelihood function and solve for θ. The resulting equation has a unique root, indicating that the MLE is unique as well. This is a desirable property of the MLE, as it guarantees that the estimator is consistent and efficient.

Furthermore, the asymptotic distribution of the MLE θ^ is normal with mean θ and variance equal to the inverse of the Fisher information. This result holds for any sample size n, making the MLE a reliable estimator of θ.

Learn more about Logistic distribution

brainly.com/question/14527743

#SPJ11

The standard error of the sample mean is 5.33. The answer is option (C).

The standard error (SE) of a statistic is the standard deviation of its sampling distribution or an estimate of that standard deviation

The standard error of the sample mean can be calculated using the formula:

Standard error = standard deviation / square root of sample size

In this case, the standard deviation is 80 and the sample size is 225. Substituting these values in the formula, we get:

Standard error = 80 / √225 = 80 / 15 = 5.33

Know more about standard error here:

https://brainly.com/question/13179711

#SPJ11

The value of the double integral ∬DyexdA is approximately 358.80 (correct to two decimal places).

To evaluate the double integral ∬DyexdA over the triangular region D, we need to set up the integral limits and then integrate in the correct order. Since the region is triangular, we can use the limits of integration as follows:

0 ≤ x ≤ 6

0 ≤ y ≤ (4/6)x

Thus, the double integral can be expressed as:

∬DyexdA = ∫₀⁶ ∫₀^(4/6x) yex dy dx

Integrating with respect to y, we get:

∬DyexdA = ∫₀⁶ [(exy/y)₀^(4/6x)] dx

= ∫₀⁶ [(ex(4/6x)/4/6x) - (ex(0)/0)] dx

= ∫₀⁶ [(2/3)ex] dx

Integrating with respect to x, we get:

∬DyexdA = [(2/3)ex]₀⁶

= (2/3)(e⁶ - 1)

Therefore, the value of the double integral ∬DyexdA is approximately 358.80 (correct to two decimal places).

Learn more about double integral

brainly.com/question/30217024

#SPJ11

Okay, let's solve this step-by-step:

* The central angle measures (2pi)/3 radians

* Converting to degrees: (2pi)/3 radians = (2*3.14)/3 = 120 degrees

* The radius of the circle is 6 cm

To find the length of an arc intercepted by an angle (in degrees) and radius, we use the formula:

Arc Length = (Degrees * pi * Radius) / 180

So in this case:

Arc Length = (120 * 3.14 * 6) / 180 = 36 cm

Therefore, the length of the arc intercepted by the central angle is 36 cm.

Let me know if you have any other questions!

It seems like you want an explanation of changing variables in a dynamical system using the given transformation x(t)=x0+u(t), y(t)=y0+v(t). In this case, u(t) and v(t) represent perturbations from the equilibrium point (x0, y0).

By substituting the transformed variables into the original system, you obtain a new system with u and v as the dependent variables.

To analyze the stability of the equilibrium point, you can linearize the new system near the origin using the Jacobian matrix, denoted by A. The Jacobian matrix contains the partial derivatives of the system's functions with respect to u and v, evaluated at the origin.

The eigenvalues of A will give you information about the system's stability, such as whether it's stable, unstable, or neutrally stable.

To learn more about : variables

https://brainly.com/question/28248724

#SPJ11

The Jacobian matrix at the origin is: A = [ 0 0

                                                                    0 0 ]

It looks like you want to change variables in a system using a transformation and then find the Jacobian matrix for the new system involving u and v functions.
1. Given the change of variables, x(t) = x0 + u(t) and y(t) = y0 + v(t).

2. Differentiate both equations with respect to t to get the new system:

  u'(t) = x'(t)
  v'(t) = y'(t)

3. Now, we need to find the Jacobian matrix for this new system. The Jacobian matrix is a matrix of partial derivatives of the functions u'(t) and v'(t) with respect to the new variables u(t) and v(t). So, we have:

  A = [∂u'/∂u  ∂u'/∂v]
      [∂v'/∂u  ∂v'/∂v]

4. To find these partial derivatives, we need the expressions for u'(t) and v'(t) in terms of u(t) and v(t). Since you haven't provided these expressions, I can't give you the exact Jacobian matrix. However, you can use the above formula tofind the Jacobian matrix once you have those expressions.
To determine the Jacobian matrix at the origin, we need to calculate the partial derivatives of the system with respect to u and v.

The Jacobian matrix A is given by:

A = [ ∂u'/∂u  ∂u'/∂v
     ∂v'/∂u  ∂v'/∂v ]

Please let me know if you have any questions or need further clarification.

Learn more about the Jacobian matrix :

brainly.com/question/29855578

#SPJ11

Besides the madrigal, the chanson was another type of secular vocal music that enjoyed popularity during the Renaissance. The given four terms that need to be included in the answer are madrigal, secular, vocal music, and Renaissance.

What is the Renaissance?The Renaissance was a period of history that occurred from the 14th to the 17th century in Europe, beginning in Italy in the Late Middle Ages (14th century) and spreading to the rest of Europe by the 16th century. The Renaissance is often described as a cultural period during which the intellectual and artistic accomplishments of the Ancient Greeks and Romans were revived, along with new discoveries and achievements in science, art, and philosophy.What is a madrigal?A madrigal is a form of Renaissance-era secular vocal music. Madrigals were typically written in polyphonic vocal harmony, meaning that they were sung by four or five voices. Madrigals were popular in Italy during the 16th century, and they were characterized by their sophisticated use of harmony, melody, and counterpoint.What is secular music?Secular music is music that is not religious in nature. Secular music has been around for thousands of years and has been enjoyed by people from all walks of life. In Western music, secular music has been an important part of many different genres, including classical, pop, jazz, and folk.What is vocal music?Vocal music is music that is performed by singers. This can include solo performances, as well as performances by groups of singers. Vocal music has been an important part of human culture for thousands of years, and it has been used for everything from religious ceremonies to entertainment purposes.

To know more about Vocal music,visit:

https://brainly.com/question/32285518

#SPJ11

The generators of the cyclic group G = (g) are {2, 3}.

In a cyclic group, the generator is an element that, when repeatedly combined with itself, generates all the other elements of the group. To find the generators of the cyclic group G = (g), we need to determine the elements that satisfy the given conditions.

From the given conditions, we can deduce that gl = 5 (mod 6) and g^l = 10 (mod 16).

Which elements satisfy the conditions for generating G?

To find the generators, we need to examine the possible values for g that satisfy the given conditions.

For condition (a), gl = 5 (mod 6), we can observe that the possible values for g are 2 and 3. Both of these values, when raised to any positive integer power, will yield remainders of 5 when divided by 6.

For condition (c), lgl = 16, we see that the only possible value for g is 2. When 2 is raised to any positive integer power, the resulting element will have a residue of 1 (mod 16).

From these analyses, we conclude that the generators of the cyclic group G = (g) are {2, 3}.

The concept of generators in cyclic groups is fundamental to group theory. A generator is an element that, through repeated multiplication with itself, generates all other elements of the group. In the case of the cyclic group G = (g), the elements 2 and 3 satisfy the given conditions and serve as generators. These generators allow us to generate all other elements in G by taking powers of the generators. The concept of generators is extensively utilized in various areas of mathematics, cryptography, and computer science.

Learn more about concept of generators

brainly.com/question/16539587

#SPJ11

This statement may be true for certain matrices, but it is not true in general.

To answer this question, we first need to understand what it means for a set of vectors to be linearly independent. A set of vectors is linearly independent if no vector in the set can be expressed as a linear combination of the others. In other words, the only way to get the zero vector as a linear combination of the vectors in the set is to set all the coefficients to zero.
Now, let's consider the statement that if the columns of a square matrix A are linearly independent, then so are the rows of A^3. To disprove this statement, we just need to find a counterexample - a square matrix A whose columns are linearly independent, but whose rows are not linearly independent in A^3.
Consider the following matrix A:
A = [ 1 0 0
     0 1 0
     0 0 0 ]
The columns of A are clearly linearly independent, since there are no non-zero coefficients that can be used to get the zero vector. However, if we calculate A^3, we get:
A^3 = [ 1 0 0
       0 1 0
       0 0 0 ]
The rows of A^3 are not linearly independent, since the third row is all zeros and can be expressed as a linear combination of the first two rows.
Therefore, we have disproved the statement that if the columns of a square matrix A are linearly independent, then so are the rows of A^3. It is important to note that this statement may be true for certain matrices, but it is not true in general.

To know more about Square Matrix visit:
https://brainly.com/question/31484624
#SPJ11

a) The determinant of A is non-zero, the vectors v1, v2, and v3 are linearly independent and do not lie in a plane in R3.

b) The determinant of B is non-zero, the vectors v1, v2, and v3 are linearly independent and do not lie in a plane in R3.

To determine whether three vectors lie in a plane in R3, we need to check if they are linearly dependent or independent. If they are linearly dependent, then they lie in a plane; if they are linearly independent, then they do not lie in a plane.

(a) To check if v1, v2, and v3 lie in a plane, we need to see if they are linearly dependent or independent. One way to do this is to find the determinant of the matrix A whose columns are the three vectors:

| 2  6  2 |

|−2  1  0 |

| 0  4 −4 |

We can expand this determinant along the first row to get:

det(A) = 2 × | 1  0 |

       - (-2) × | 6  4 |

       + 0 × | 1 −4 |

       = 2(1 × 4 - 0 × (-4)) - (-2)(6 × 4 - 1 × 1) + 0

       = 8 + 47 + 0

       = 55

(b) To check if v1, v2, and v3 lie in a plane, we need to see if they are linearly dependent or independent. One way to do this is to find the determinant of the matrix B whose columns are the three vectors:

|−6  3  4 |

| 7  2 −1 |

| 2  4  2 |

We can expand this determinant along the third column to get:

det(B) = 4 × |−6  3 |

       - (-1) × | 7  2 |

       + 2 × | 2  4 |

       = 4(-6 × 2 - 3 × 7) - (-1)(7 × 4 - 2 × 2) + 2(2 × 2 - 4 × 3)

       = -96 + 30 + (-8)

       = -74

for such more question on vectors

https://brainly.com/question/24400579

#SPJ11

1. Define the variables: C = cost and V = total visits.2. Write the equations.Gisele's Gym CostFreddie's Fitness CostC = 145 + 3VC = 75 + 5V3V = 5V - 70.

Simplify the equations by subtracting 3V and 5V from both sides:2V = 70V = 35Using V = 35, substitute 35 into one of the equations to determine the cost of membership at both places:C = 145 + 3(35)C = 145 + 105C = 250This means that membership will cost the same at both gyms at 35 visits and the cost will be $250. Answer: 35 visits.

Variables:

Let c be the total cost and v be the number of visits.

Equations:

For Gisele's Gym:

c = 145 + 3v

For Freddie's Fitness:

c = 75 + 5v

Solve using substitution:

Since both costs are equal, we can set the two equations equal to each other and solve for v:

145 + 3v = 75 + 5v

Rearranging the equation:

145 - 75 = 5v - 3v

Simplifying:

70 = 2v

Dividing both sides by 2:

v = 35

Therefore, both Gisele's Gym and Freddie's Fitness will cost the same after 35 visits.

To know more about the word cost visits :

https://brainly.com/question/13910351

#SPJ11

It is estimated that it will take approximately 8 hours to grow the grain size from 50 um to 100 um in this annealing process.

The grain growth rate in a material can be described by the equation:

d^2 = k * t

where d is the grain size, k is a constant, and t is the time. In this case, we can use the given data to estimate the time required to grow the grain size from 50 um to 100 um.

Given that the grain size grows from 25 um to 50 um in 2 hours, we can calculate the value of k:

(50^2 - 25^2) = k * 2

Simplifying the equation:

(2500 - 625) = 2k

1875 = 2k

k = 937.5

Now, we can estimate the time required to grow the grain size from 50 um to 100 um:

(100^2 - 50^2) = 937.5 * t

(10000 - 2500) = 937.5 * t

7500 = 937.5 * t

Dividing both sides by 937.5:

t = 8 hours

Therefore, it is estimated that it will take approximately 8 hours to grow the grain size from 50 um to 100 um in this annealing process.

learn more about "annealing ":- https://brainly.in/question/6401516

#SPJ11

A rod for 44 cm is made of iron with a density of 8 [tex]\frac{g}{cm^{3} }[/tex], 62 cm of the rod is made of aluminum with a density of 2.7 [tex]\frac{g}{cm^{3} }[/tex], so total mass of the rod is 27.37 times the cross-sectional area.

The rod has two segments:
The first segment, which is 44 cm long and starts from the left side of the rod, is made of iron with a density of 8[tex]\frac{g}{cm^{3} }[/tex].
The second segment, which is 62 cm long and follows the iron segment, is made of aluminum with a density of 2.7 [tex]\frac{g}{cm^{3} }[/tex].
To find the total mass of the rod, we need to calculate the mass of each segment separately and add them up.
The mass of the iron segment can be found using the formula:
mass = density x volume
The density of iron is 8 [tex]\frac{g}{cm^{3} }[/tex], and the volume of the iron segment is:
volume = length x cross-sectional area
The cross-sectional area of the rod is assumed to be constant throughout its length (i.e., the rod has a uniform diameter). We don't know the diameter, but we do know the length and the fact that the iron segment is 44 cm long. Therefore, we can assume that the cross-sectional area of the iron segment is:
cross-sectional area = ([tex]\frac{44}{106}[/tex]) x total cross-sectional area
where 106 is the total length of the rod (44 + 62), and [tex]\frac{44}{106}[/tex] is the fraction of the total length that the iron segment occupies.
Using this formula, we can find the volume of the iron segment:
volume = length x cross-sectional area
      = 44 cm x [([tex]\frac{44}{106}[/tex]) x total cross-sectional area]
      = ([tex]\frac{44}{106}[/tex]) x total cross-sectional area x [tex]cm^{3}[/tex]
Substituting the density of iron and the volume we just found, we get:
mass of iron segment = density x volume
                    = 8 [tex]\frac{g}{cm^{3} }[/tex] x [([tex]\frac{44}{106}[/tex]) x total cross-sectional area x [tex]cm^{3}[/tex]]
                    = 11.32 g x (total cross-sectional area)
Therefore, the mass of the iron segment is 11.32 times the cross-sectional area of the rod.
Now let's move on to the aluminum segment. Using the same approach, we can find the volume of the aluminum segment:
volume = length x cross-sectional area
      = 62 cm x [([tex]\frac{62}{106}[/tex]) x total cross-sectional area]
      = ([tex]\frac{62}{106}[/tex]) x total cross-sectional area x [tex]cm^{3}[/tex]
Substituting the density of aluminum and the volume we just found, we get:
mass of aluminum segment = density x volume
                       = 2.7[tex]\frac{g}{cm^{3} }[/tex] x [([tex]\frac{62}{106}[/tex]) x total cross-sectional area x [tex]cm^{3}[/tex]]
                       = 16.05 g x (total cross-sectional area)
Therefore, the mass of the aluminum segment is 16.05 times the cross-sectional area of the rod.
To find the total mass of the rod, we add the mass of the iron segment and the mass of the aluminum segment:
total mass = mass of iron segment + mass of aluminum segment
          = 11.32 x (total cross-sectional area) + 16.05 x (total cross-sectional area)
          = 27.37 x (total cross-sectional area)
Therefore, the total mass of the rod is 27.37 times the cross-sectional area of the rod.

Learn more about density here:

https://brainly.com/question/29775886

#SPJ11

The level curve of the function f(x,y)=-2x^3 + 5x^2 - 11x + 8/ln(y)=30 is the set of points in the (x,y) plane where the function takes a constant value of 30. To find this curve, we can start by setting the given function equal to 30:

-2x^3 + 5x^2 - 11x + 8/ln(y) = 30
We can then solve for y in terms of x:
ln(y) = 8/(30 + 2x^3 - 5x^2 + 11x)
y = e^(8/(30 + 2x^3 - 5x^2 + 11x))
This equation defines the level curve of f(x,y) at the level 30. To visualize this curve, we can plot it in the (x,y) plane using a graphing calculator or software. The resulting curve will be a smooth, continuous curve that varies in shape and size depending on the values of x and y. The curve may have multiple branches or intersect itself, depending on the nature of the function f(x,y).

Learn more about graphing calculator here:

https://brainly.com/question/30339982

#SPJ11

I think you may have accidentally cut off the question. Can you please provide the full question so that I can assist you better?

Answer:.

Step-by-step explanation:

The height of the tree, found using the distances in the diagram and Pythagorean Theorem is about 92.49 feet

The Pythagorean Theorem express the relationship between the lengths of the sides of a right triangle. The theorem states that the square of the hypotenuse side of a right triangle is equivalent to the sum of the squares of the other two sides of the triangle.

The distances in the drawing, whereby the tree is vertical indicates;

The distance line from the person to the top of the tree, the height of the person, and the distance from the base of the tree to the person forms a right triangle

Hypotenuse side = The distance line from the person to the top of the tree, h

The legs = The height of the tree, y and the distance from the person to the base of the tree, x

Pythagorean theorem indicates that we get;

h² = y² + x²

h = 102, x = 43, therefore;

102² = y² + 43²

y² = 102² - 43² = 8555

The height of the tree, y = √(8555) ≈ 92.49

Learn more on Pythagorean Theorem here: https://brainly.com/question/343682

#SPJ1

The answer to the given question is Probability sampling.

What is Probability Sampling?

Probability sampling is a method of selecting a random sample from a target population.

It is used to provide every individual in the target population with an equal opportunity of being selected.

Probability sampling is a statistical method of choosing a sample in which every unit in the population has a specified probability of being included.

There are several types of probability sampling.

These include the following:

        Simple random sampling

        Stratified sampling

       Cluster sampling

       Systematic sampling

In probability sampling the investigator identifies each member of the population and specifies the probability of selecting each one.

It is usually the most straightforward method of sampling because the sample size can be calculated using a simple formula.

To know more about probability visit

https://brainly.com/question/30034780

#SPJ11

For a sample of 36 bearings is collected with measured diameter, the approximate probability that sample mean of bearings will fall between [tex](\mu - 0.0001)[/tex] and [tex](\mu + 0.0001)[/tex] inch is equals to 0.4514.

We have a metal lathe that produces machine bearings is properly adjusted.

Sample size for diameter , n = 36

Standard deviations, s = 0.001

We have to determine probability that the mean diameter of the sample of 36 bearings will fall between [tex](\mu - 0.0001)[/tex] and [tex](\mu + 0.0001)[/tex] inch. Let X be a random variable for mean diameter of sample. There is normal distribution of X random variable, [tex]X \: \tilde \: N( \mu, \frac{\sigma²}{n})[/tex].

Now, probability that sample mean of diameter will fall between [tex](\mu - 0.0001)[/tex] and [tex](\mu + 0.0001)[/tex]

[tex]= P( \mu - 0.0001 < \bar x < \mu - 0.0001) \\ [/tex]

[tex]= P( \frac{\mu - 0.0001 - \mu }{\frac{\sigma} {\sqrt{n}}}< \frac{\bar x - \mu}{\frac{\sigma} {\sqrt{n}}}<\frac{ \mu + 0.0001 - \mu } { \frac{\sigma} {\sqrt{n}}}) \\ [/tex]

[tex]= P( \frac{- 0.0001 }{\frac{0.001} {\sqrt{36}}}< z <\frac{ 0.0001} { \frac{0.001} {\sqrt{36}}})[/tex]

[tex]= P( \frac{- 0.0006}{0.001} < z <\frac{ 0.0006}{0.001})[/tex]

= P( -0.6 < z < 0.6)

= P(z< 0.6) - P( z < - 0.6)

Using the p-value calculator or normal table or Excel command, the values of are calculated.

= 0.4514

Hence, required value is 0.4514.

For more information about sample mean, visit:

https://brainly.com/question/30401654

#SPJ4

The measure of the angles are;

m<AED = 90 degrees

m<DAE = 43 degrees

m<BCE = 37 degrees

To determine the measure of the angles, we need to know the following;

From the information given, we have that;

m<AED is right- angled thus is equal to 90 degrees

But we have that;

m<DAE + m<EDA + m<AED = 180

Then,

m<DAE + 37 + 90 = 180

collect the like terms

m<DAE = 180 - 137

m<DAE = 43 degrees

m<BCE = m<EDA

Hence, m<BCE = 37 degrees

Learn more about rhombus at: https://brainly.com/question/26154016

#SPJ4

The Cartesian equation is x^2 + y^2 = (4/y)^2, and the resulting curve is a circle centered at the origin with radius r = 16/y for all values of y except y = 0.

To convert the polar equation r sin(θ) = 4 into Cartesian coordinates, we can use the identities x = r cos(θ) and y = r sin(θ).

Substituting r sin(θ) = 4 into the second equation gives y = 4/r cos(θ). We can now substitute r^2 = x^2 + y^2 into this equation to get:

y = 4/√(x^2 + y^2) * x/√(x^2 + y^2)

Simplifying this equation gives:

x^2 + y^2 = (4/y)^2

This is the equation of a circle centered at the origin with radius r = 16/y. However, we need to be careful because the original polar equation is only defined for θ values where sin(θ) ≠ 0, or in other words, θ ≠ kπ for any integer k.

When we look at the Cartesian equation x^2 + y^2 = (4/y)^2, we can see that it is undefined at y = 0. However, we know that the original polar equation is defined for all values of θ except θ = kπ. Therefore, we can say that the resulting curve is a circle centered at the origin with radius r = 16/y for all values of y except y = 0.

In summary, the Cartesian equation is x^2 + y^2 = (4/y)^2, and the resulting curve is a circle centered at the origin with radius r = 16/y for all values of y except y = 0.

Learn more about cartesian equation

brainly.com/question/11676110

#SPJ11

This result shows that the eigenvalues of A^2 are the squares of the eigenvalues of A, and the eigenvectors of A and A^2 are the same

Let λ be the eigenvalue associated with eigenvector v of matrix A. Then by definition, we have:

Av = λv

Now consider the matrix A^2. We can write A^2 as the product A * A, so we have:

A^2 v = A(Av) = A(λv) = λ(Av)

Note that Av = λv, so we have:

A^2 v = λ(Av) = λ(λv) = λ^2 v

This shows that v is an eigenvector of A^2 with associated eigenvalue λ^2. To see why, note that we have shown that A^2 v is a scalar multiple of v, with the scalar being λ^2. This means that v is an eigenvector of A^2 with associated eigenvalue λ^2.

Therefore, we have shown that if v is an eigenvector of A with associated eigenvalue λ, then v is an eigenvector of A^2 with associated eigenvalue λ^2.

To summarize:

If Av = λv, then A^2 v = λ^2 v.

So, v is an eigenvector of A^2 with associated eigenvalue λ^2.

This result shows that the eigenvalues of A^2 are the squares of the eigenvalues of A, and the eigenvectors of A and A^2 are the same

To know more about eigenvectors refer here

https://brainly.com/question/31013028#

#SPJ11

9.81 m/s².

Given that the pendulum is 70 cm long and its period is 1.68 s, we can use the formula for the period of a simple pendulum to find the value of g at the location of the pendulum:

T = 2π√(L/g)

Where T is the period (1.68 s), L is the length of the pendulum (0.7 m), and g is the acceleration due to gravity. We can rearrange the formula to solve for g:

g = 4π²L/T²

Substituting the given values:

g = 4π²(0.7 m) / (1.68 s)²
g ≈ 9.81 m/s²

The value of g at the location of the pendulum is approximately 9.81 m/s².

Learn more about Simple pendulum here:

https://brainly.com/question/29150473

#SPJ11