the enthalpy (heat) of vaporization for ethanol (c2h5oh) is 43.3 kj/mol at 25°c. how much heat, in kilojoules, is required to vaporize 115 g of ethanol at 25°c?

1. Censorship: The government continues to censor books, literature, and other sources of knowledge and information in this part of the novel.

2. Rebellion: Throughout the novel, characters like Montag and Clarisse challenge the status quo and fight against the oppressive government.

3. Technology: Technology is used to control and manipulate the population, but is also a tool for progress and freedom.

4. Knowledge: The importance of knowledge and information is highlighted throughout the novel, as characters seek to learn more in order to resist the oppressive government.

What ia freedom?

Freedom is the ability to live life as one chooses, free from any constraints or interference from another person or entity. It is the right to think, speak, and act without interference or fear of retribution, and the right to make one's own choices.

Therefore,

To learn more about freedom

Here: https://brainly.com/question/13273450

#SPJ4

Zn, Sn, Si, Al, and Ni serve as the primary alloying elements in copper alloys, which are alloys based on copper. Brasses (Cu-Zn) and bronzes (Cu-Sn), two copper-based alloys, are widely used in a variety of industrial and societal purposes.

Unless they have already claimed it, this person is not registered with ResearchGate. The normal copper content of aluminum-copper alloys ranges from 9 to 12%, with lesser additions of other components.

The copper significantly boosts strength and speeds up precipitation hardening. Aluminium's ductility and corrosion resistance may be affected by copper.

Therefore, It provides a weight percentage of the elements found in the produced oxides. Convert this weight percentage to a mole percentage to confirm the ratio in which the initial precursors were used to create the sample.

Learn more about copper alloy here:

https://brainly.com/question/29061599

#SPJ4

After letting the experiment run for a week, Miller and Urey found that various types of amino acids, sugars, lipids and other organic molecules had formed.

The first experimental support to Oparin-theory Haldane's of origin of life came from Urey and Miller's experiment. They conducted experiment on evolution to prove the biochemical origin of life.
Miller created a laboratory apparatus out of glass tubes and flasks in 1953. He created a hydrogen, ammonia, methane, and water vapour atmosphere in one large flask and allowed condensed liquid to accumulate in another small flask. In the large flask, the methane, ammonia, and hydrogen ratios were 2: 1: 2. The apparatus was powered by heating the liquid as well as electric sparks from tungsten electrodes in the gaseous flask. The apparatus conditions were similar to the early earth's atmosphere.

Go through the given link below to know more about Organic molecules:-

https://brainly.com/question/26556885

#SPJ4

The 5.15 gram sample of the hydrocarbon is burned in oxygen, producing 15.6 grams of carbon dioxide and 8.45 grams of water. The empirical formula is  C₂H₅.

Mass of water obtained = 8.45 g

Moles of water = 8.45 / 18

                          = 0.46 moles

2 moles of hydrogen atoms are present in 1 mole of water.

Moles of H = 2 x 0.46

                  = 0.92 moles

Molar mass of H atom = 1 g/mol

Mass of H in molecule = 0.92 x 1 = 0.92 g

The compound is the hydrocarbon. That means it  contains hydrogen and carbon.

Mass of C in the sample = Total mass - Mass of H

Mass of the sample = 5.15 g

Mass of C in sample = 5.15 - 0.92

                                  = 4.23 g  

Molar mass of  C = 12 g/mol

Moles of C  = 4.23  / 12

                   = 0.35 moles

Dividing by the smallest one , we get :

C = 1

H = 2.6

Converting to the smallest whole number

C = 2

H = 5

The empirical formula of the compound is C₂H₅.

To learn more about empirical formula here

https://brainly.com/question/13146106

#SPJ4

The molality of an aqueous solution prepared by dissolving 0.112 moles of LiCl in 13.7 moles of H2O is 0.454 m

To calculate the molality of an aqueous solution prepared by dissolving 0.112 moles of LiCl in 13.7 moles of H2O, you need to first calculate the mass of solute (LiCl) and the mass of solvent (H2O).

To do this, you need to multiply the number of moles of each substance by their respective molar masses. LiCl has a molar mass of 42.39 g/mol, and H2O has a molar mass of 18.02 g/mol. Therefore, the mass of

LiCl is 0.112 moles x 42.39 g/mol = 4.72 g, and the mass of H2O is 13.7 moles x 18.02 g/mol = 246.4 g.

Once you have the masses of the solute and solvent, you can calculate the molality by dividing the mass of solute by the mass of solvent, and then multiplying the result by 1000. In this case, the result is:

4.72 g / 246.4 g x 1000 = 0.454 m.

Learn more about the molality:

https://brainly.com/question/14366957

#SPJ4

Answer:

guard cells

cell membrane

An inorganic substance having the formula Pb(NO3)2 is lead(II) nitrate. It frequently manifests as a white powder or colourless crystal.

It is an extremely toxic oxidizing agent that is classified as possibly carcinogenic to humans.

Consumption: If swallowed, harmful. Methemoglobinemia can result from ingesting nitrate-containing substances. Consuming lead compounds can have harmful effects on the kidneys, central nervous system, and blood-forming organs. Lead poisoning symptoms can be brought on by ingesting lead compounds.

To know more about Lead II Nitrate visit:

https://brainly.com/question/26980915

Answer:

boron atom has 5 protons and 5 electrons. Its average atomic mass is 10.81.

Boron's atomic number is 5 because it has 5 protons in its nucleus. The number of protons in an atom's nucleus is what determines the element's atomic number.

What is nucleus?

Nucleus is the central core of an atom, consisting of protons and neutrons. It is the heaviest and most important part of the atom, as it contains most of the atom's mass and positive charge. The number of protons in the nucleus determines the element, while the number of neutrons determines the isotope. The nucleus is held together by a strong nuclear force and can be found in the center of the atom. It is surrounded by a cloud of electrons that orbit it at a distance. The nucleus is the key to understanding how chemical reactions occur, as its composition is what determines the type of atom.

Therefore, Boron's atomic number is 5 because it has 5 protons in its nucleus.

To learn more about nucleus

Here : https://brainly.com/question/14110259

#SPJ4

The electronegativity values of elements can be found on the periodic table and can be used to determine whether the bond is ionic or covalent.

The type of bond present in a molecule can be determined based on the electronegativity difference between the atoms that make up the bond. If the electronegativity difference between the atoms is large, then the bond is considered ionic. On the other hand, if the electronegativity difference is small, the bond is considered covalent. The electronegativity values of elements can be found on the periodic table.

For example, the elements present in sugar (C12H22O11) are carbon, hydrogen, and oxygen, with carbon having an electronegativity of 2.5, hydrogen of 2.2, and oxygen of 3.5. As the electronegativity difference between these elements is small, the bonds present in sugar are covalent. Similarly, in ethanol (C2H5OH), the electronegativity difference between carbon, hydrogen, and oxygen is also small, indicating covalent bonds.

Learn more about periodic table here: brainly.com/question/15987580

#SPJ4

The proper way to read a meniscus is that we for a concave meniscus, we read the bottom of the curve and for a convex meniscus, we read the top of the curve.

Hence, the correct options are options a and d.

Meniscus is basically defined as the curve which exists on the surface of a particular liquid when it is placed in a container. This curve can be either convex or can be concave. It develops as a result of the surface tension of the liquid.

It is very important to be properly able to read the meniscus to take accurate readings. If the meniscus is concave, then the reading should be taken at the bottom of the curve and if the meniscus is convex, the reading should be taken at the top of the curve.

--The given question is incomplete, the complete question is

"What is the the proper way to read a meniscus when measuring solution volume? Select all that apply:

a. Bottom of the concave meniscus

b. Top of the concave meniscus

c. Bottom of the convex meniscus

d. Top of the convex meniscus"--

To know more about meniscus here

https://brainly.com/question/28013459

#SPJ4

Mass of Barium = 720.73 g ; Mass of Phosphorus = 108.37 g ; Mass of Oxygen =  223.91 g

To determine the masses of barium, phosphorus, and oxygen in a sample of barium phosphate (Ba3(PO4)2), you need to calculate the formula weight of the compound and then multiply it by number of moles of  compound in the sample.

First, calculate the formula weight of the compound:

Ba3(PO4)2 formula weight = (3 x 137.327 g/mol) + (2 x (30.97 g/mol + 4 x (16.00 g/mol)) = 601.9 g/mol

n = 1053.8 g / 601.9 g/mol = 1.75 mol

Mass of Barium = 3 x 137.327 g/mol x 1.75 mol = 720.73 g

Mass of Phosphorus = 2 x 30.97 g/mol x 1.75 mol = 108.37 g

Mass of Oxygen = 8 x 16.00 g/mol x 1.75 mol = 223.91 g

To know more about molar masses, refer

https://brainly.com/question/837939

#SPJ1

Particles in a gas have very little attraction to one another. In comparison to the particles in a solid or liquid, they are very far apart and constantly moving.

Gases have the most space between particles. Gases are relatively simple to compress because the distance between the particles is so great. Evaporation or boiling result in the formation of gases from liquids. Liquid particles are closer to one another than gases, but they are further apart than solid particles.

The molecules are closest together when they are solid. They are close to touching but slightly apart in liquid. They are liberated in the form of gas; bouncing back and forth. As a result, when water is a gas, its molecules are the furthest apart.

Learn more about particles:

brainly.com/question/1405610

#SPJ4

The percent dissociation of HClO in a 0. 015 m aqueous solution of HClO is 0.14 %

When introduced in water, strong acids and bases totally dissociate. In other words, the full base [BOH] or acid [HA] splits into ions.

On the other hand, weak acids and bases do not entirely dissociate in an aqueous solution. is a marker for % decoupling (alpha). A chemical is simply dissociated into its corresponding ions in a suitable solvent. Depending on the solvent, a molecule will dissociate to a different extent.

Dissociation of an aqueous solution of hypochlorous acid in a balanced chemical reaction

HClO(aq) ⇄ H⁺(aq) + ClO⁻(aq).

Ka = [H⁺] · [ClO⁻] / [HClO].

The concentration of hydrogen cations or protons at equilibrium is [H+].

The concentration of hypochlorite anions at equilibrium is [ClO].

The equilibrium concentration of hypochlorous acid is [HClO].

The acid dissociation constant is called Ka.

Ka(HClO) = 3.0·10⁻⁸.

c(HClO) = 0.015 M.

Ka(HClO) = α² · c(HClO).

α = √(3.0·10⁻⁸ ÷ 0.015).

α = 0.0014 · 100% = 0.14%.

Learn more about percent dissociation at https://brainly.com/question/15229156

#SPJ4

CoBr2 (aq) + Ba(OH)2 (aq) = Co(OH)2 + BaBr2 (aq) (aq) The reaction between aqueous solutions of barium hydroxide and cobalt(II) bromide has the following net ionic equation:

A mathematical statement that establishes the equivalence of two expressions is known as an equation. To indicate the relationship between several parts, it makes use of mathematical symbols like the equal sign (=), integers, and variables. In areas like physics, engineering, and economics, equations may be utilised to solve issues and simulate actual circumstances. For instance, the linear equation y = mx + b, where m is the line's slope and b is its y-intercept, is a slope-intercept equation. Finding the answer to a problem can be aided by solving for x and y in an equation.

Learn more about equation:here:

https://brainly.com/question/29657983

#SPJ4

A  covalent bond is likely to form between two nonmetals with electron deficiency. Hence, they will share their valence electrons each other to achieve octet.

A covalent bond is formed between two non-metals through sharing of valence electrons between atoms. For example carbon and oxygen are non metals forming the covalent compound CO.

The number of shared pair of electron depends on the valence of each atoms. For example in HCl, both atoms shares one electron to each other.

In a covalent compound, if the difference in electronegativity between two atoms is significant, the shared pair of electrons attracts towards the highly electronegative atom and resulting charge separation make them polar compounds.

Find more on covalent compounds:

brainly.com/question/21505413

#SPJ1

The volume of carbon dioxide that is made when a chemist burns 346 liters of fuel (C₃H₈) at a constant temperature and pressure is 1038 Liters.

The mole ratio of the reaction of the combustion of the fuel is obtained from the equation of the reaction as follows:

C₃H₈ (g) + 5 O₂ (g) ----> 3 CO₂ (g) + 4H₂O (g)

The mole ratio of the fuel and the carbon dioxide produced is 1 : 3

Molar volume of a gas = 22.4 L

Moles of the fuel, C₃H₈, used = 346/22.4 moles

The volume of carbon dioxide produced = 346/22.4 moles * 3 * 22.4

The volume of carbon dioxide produced = 1038 Liters.

Learn more about the molar volume of a gas at: https://brainly.com/question/7718511

#SPJ1

The presence of a large molecular dipole moment in diphenyl ethers leads unequivocally to a centrosymmetric crystal structure

A dipole moment is produced when electrons are distributed unevenly among atoms in a molecule. This happens when one atom possesses a lone pair of electrons and the difference in electronegativity vector points in the same direction, or when one atom is more electronegative than another, causing that atom to pull more strongly on the shared pair of electrons. The water molecule, which consists of one oxygen and two hydrogen atoms, is one of the most prevalent instances. Each hydrogen has a partial positive charge, while oxygen has a partial negative charge due to variances in electronegativity and lone electrons.

Learn more about dipole moment

brainly.com/question/16260427

#SPJ4

The electronic configuration of potassium is 1s2 2s2 2p6 3s2 3p6 4s1. This means that it has 1 electron in its outermost shell, which is the 4s orbital.

Orbital is a term used to describe an object or particle that moves around another object in an elliptical, circular, or parabolic path. In astrophysics, orbital is used to describe the motion of a celestial body such as a planet, moon, or asteroid around a star. It can also refer to the motion of a satellite around a planet or moon. The properties of the orbit, such as the size, shape, and speed, are determined by the gravitational pull between the objects. The orbital period is the amount of time it takes to complete one full orbit around the host body. In addition, orbital mechanics is the study of the motion of objects in space and how their orbits are affected by gravitational forces.

The other electrons are distributed in the first three shells, with two electrons in the 1s orbital, two electrons in the 2s orbital, six electrons in the 2p orbitals, two electrons in the 3s orbital, and six electrons in the 3p orbitals.

To learn more about orbital
https://brainly.com/question/20319149
#SPJ4

maximum concentration of phosphate ion that urine can contain before a calculus begins to form is [PO 43−]= 4×10 −9 .

Step 1 = Ca3 (PO4)2 s ----- 3 Ca2 +(aq)+ 2PO4^3 -(aq)

Concentration of calcium in urine: [Ca 2+ ] = m×M = 1.4L 0.1g×0.025mol/g = 1.8×10 −3 M

K sp = [Ca 2+] 3[PO 43−​] 2 =1×10 −25

[PO 43− ]

To know more about calcium phosphate visit:

https://brainly.com/question/11082654

#SPJ4

​

​

The type of solvent used with a marker can greatly affect the reaction and outcome of the marker. When selecting a solvent, it is important to consider the polar or non-polar nature of both the solvent and the marker in order to achieve the desired result.

Solvents are liquids that are used to dissolve substances and are an important aspect of chemical reactions and processes. When it comes to markers, the type of solvent used can greatly affect the reaction and outcome of the marker.

In general, solvents can be classified as polar or non-polar. Polar solvents, such as water, have a positive and negative end, while non-polar solvents, such as oil, have a more uniform distribution of electrons. The solubility of a substance is determined by its polar or non-polar nature and the polar or non-polar nature of the solvent.

Markers contain various types of dyes or pigments that can be either polar or non-polar. When a polar solvent, such as water, is used with a polar marker, the marker will dissolve easily, leading to a more intense and uniform color. On the other hand, when a non-polar solvent, such as alcohol, is used with a polar marker, the marker may not dissolve as well and the color may be lighter or less intense.

Here you can learn more about Solvents

https://brainly.com/question/15212814#

#SPJ11

Answer:

Explanation:

1 atmosphere (standard pressure), 273.15 kelvin (standard temperature)

The expected to have the greatest viscosity is option c.C5H11OH.

The resistance of a fluid (liquid or gas) to a change in shape or motion of adjacent sections relative to one another is known as viscosity. Viscosity is a sign of flow resistance.

The thickness of a fluid is another name for viscosity. The state of a fluid, including its temperature, pressure, and rate of deformation, affects its viscosity. In some circumstances, the dependence on some of these traits is minimal. For instance, the rate of deformation has no effect on the viscosity of a Newtonian fluid. Super fluids are the only fluids that exhibit zero viscosity, or no resistance to shear stress; in all other fluids, positive viscosity is required by the second law of thermodynamics. Ideal or inviscid fluids are those with no viscosity.

To know more about viscosity click here:

brainly.com/question/13562210

#SPJ4

The tiny bubbles seen inside the unopened plastic bottle of carbonated soft drink were carbon dioxide (CO2) gas.

The carbon dioxide was dissolved in the soft drink under high pressure. When the bottle was opened, the pressure inside the bottle dropped, causing the carbon dioxide to escape from the solution in the form of bubbles. Which was dissolved in the liquid under pressure. When the student opened the bottle, the pressure inside the bottle was released, causing the CO2 gas to escape from the liquid and form bubbles on the inside of the bottle. The loud hiss heard by the student was the sound of the CO2 gas escaping from the bottle. This process is known as degassing, and it occurs because the solubility of CO2 in the liquid decreases as the pressure decreases.

Learn more about carbon dioxide:

brainly.com/question/3049557

#SPJ4

The sum of the radii of a kite's diagonals divides its area in half. A kite's area is calculated using the formula Area = 12 (d)1 (d)2. Here, the kite's short and long diagonals (d)1 or (d)2 are shown.

Area equals length times width. Area = l b. Area Equals Radius times Radius Region = tetragonal × r2(π + 3.14) These methods can also be used to determine the area of various quadrilaterals, a particular type of polygon with three sides and angles less than 90 degrees. Application. Since its inception, geometry has been built on the idea of area.

The area is the volume a flat, two-dimensional item occupies in a plane. The space occupied by the a three-dimensional object is referred to as its volume.

To know more about volume visit :

https://brainly.com/question/24189159

#SPJ4

To make 10 ml of a 100 um solution from a 500 um solution of DCPIP, you need to add 8 ml of water.

This is because the ratio of the original solution to the desired solution is 500:100. Therefore, the amount of water required is 10 ml - (10 ml x 100/500) = 8 ml.

To further understand the process of making a dilution from a stock solution, it is helpful to understand the concept of molarity. Molarity is a measure of concentration, where the number of moles of a given substance per liter of solution is calculated. To make a dilution from a stock solution, the molarity of the stock solution must be known, and the desired molarity must also be known.

Learn more about Molarity:

https://brainly.com/question/17138838

#SPJ4

The reason dissolving salt in water an endothermic process is because it requires the absorption of heat from the environment. This happens because the bonds between the salt ions and the water molecules are disrupted, and energy is needed to overcome these bonds and allow the salt ions to dissolve in the water.

Any thermodynamic process with an increase in the enthalpy H (or internal energy U) of the system is referred to as an endothermic reaction in thermochemistry (from the Greek v (endon) "inside" and -(therm) "hot, warm"). A closed system often transfers heat into itself during such a process by absorbing thermal energy from its surroundings.

As a result, an endothermic reaction typically results in a rise in the system's temperature and a fall in the environment's. It could involve a chemical reaction, such when ammonium nitrate (NH4NO3) is dissolved in water (H2O), or a physical action, like when ice cubes melt.

Here you can learn more about an endothermic process

brainly.com/question/29765986

#SPJ4

Yes, canola oil and olive oil are good choices for replacing saturated fats in your diet, as they are rich in monounsaturated fats.

Both canola oil and olive oil contain high amounts of monounsaturated fats, which have been shown to have health benefits, such as reducing the risk of heart disease and improving cholesterol levels. Monounsaturated fats are also more stable than polyunsaturated fats, which makes them a better choice for cooking and baking.

In contrast, saturated fats have been linked to an increased risk of heart disease, as they raise LDL (bad) cholesterol levels. For this reason, it is recommended to limit the amount of saturated fats in your diet and replace them with healthier fats, such as monounsaturated and polyunsaturated fats.

In conclusion, using canola oil and olive oil in place of saturated fats can help you achieve a healthier balance of fats in your diet.

Learn more about saturated fats here:

https://brainly.com/question/29816448

#SPJ4

According to the question, Ca from the lit had the lowet electron affinity.

What is Ca?

Calcium is an essential mineral that is found in many foods. It is important for bone health, and plays a role in muscle contraction, nerve conduction, and blood clotting. Calcium is also needed for other body functions, such as hormone secretion, enzyme activation and cell signaling. The body does not make calcium, so it must be obtained through food or supplements. Milk and dairy products are a great source of calcium, as are some leafy greens, fish, and legumes. Calcium supplements are also available, but should be taken with caution, as too much can cause health issues. It is important to speak with a healthcare provider before starting a calcium supplement.

To know more about Calcium(Ca) visit:

https://brainly.com/question/18774218

#SPJ4

From the data in the table, it can be seen that the rate of reaction is independent of the concentration of O3, meaning that the reaction order with respect to O3 is 0. The value of k is 0.472 mol/(L.s)-1

On the other hand, the rate of reaction is directly proportional to the concentration of SO2, meaning that the reaction order with respect to SO2 is 1.

b. Based on this information, the rate law for the reaction is:

rate = k[SO2].

c. To determine the value of the rate constant, we can use the rate data for one set of conditions. For example, when [SO2] = 0.25 mol/L and [O3] = 0.40 mol/L, the initial rate is 0.118 mol/(L.s). Plugging these values into the rate law, we get:

0.118 = k × 0.25.

Solving for k, we find that the value of k is 0.472 mol/(L.s)-1. The units of k are (L.s)-1.

Learn more about reaction order:

brainly.com/question/1769080

#SPJ4