the difference between renewable and nonrenewable resources is that nonrenewable resources require

Answers

Answer 1

Answer:

Explanation:

The difference between renewable and nonrenewable resources is that nonrenewable resources require millions of years to form and are being depleted at a faster rate than they are being replenished, while renewable resources are replenished naturally and can be sustained over time. Nonrenewable resources include fossil fuels such as coal, oil, and natural gas, as well as minerals and metals that are mined from the earth. These resources are finite and once they are depleted, they cannot be replaced. In contrast, renewable resources include solar, wind, hydro, geothermal, and biomass energy, as well as resources such as timber, water, and crops that can be regrown or replenished naturally. These resources are replenished over time and can be sustained for future generations. The use of renewable resources is seen as a more sustainable and environmentally friendly approach to resource management, as they have a lower impact on the environment and can be used indefinitely without running out.


Related Questions

which drainage patterns only forms on massive igneous rocks​

Answers

There are no specific drainage patterns that only form on massive igneous rocks. Drainage patterns are largely determined by the underlying geology and the slope of the land.

However, there are certain types of drainage patterns that are commonly found on volcanic or igneous landscapes. For example, dendritic drainage patterns, which resemble the branching pattern of a tree, are common on volcanic landscapes that have undergone extensive erosion.

Rectangular drainage patterns, which are characterized by channels that follow a rectangular or orthogonal pattern, can also be found on volcanic landscapes that have been faulted or fractured.

Parallel drainage patterns, which occur when streams flow parallel to each other, can also be found on volcanic landscapes that have undergone extensive faulting or fracturing.

Ultimately, the specific drainage pattern that forms on any given landscape is determined by a variety of factors, including the underlying geology, the slope of the land, and the climate and vegetation of the area

Atmospheric deposition is receiving increased attention in the scientific community, and has become the subject of a specific research area in the environmental sciences. Acid rain is detrimental to our ecosystems and can be measured in several ways. Which of the following methods would best identify changes from acid deposition in an area over time?
a. Calculating the change in sulfur dioxide emissions from coal-burning power plants over time
b. Mapping out coal-burning power plant locations over the past 50 years
c. Measuring the pH of rainwater and surface water in affected areas
d. Monitoring the long-term chemical and biological parameters of an ecosystem

Answers

Option-C:The best method for identifying changes in acid deposition over time in a region is "measuring the pH of rainwater and surface water in affected areas."

These pollutants react with atmospheric water to produce sulfuric acid and nitric acid, respectively, leading to acid rain. Acid deposition can cause harm to the natural environment and human health, which has led to an increased scientific interest in it. Acid deposition can be monitored in several ways, such as the measuring the pH of rainwater and surface water in affected areas, or monitoring the long-term chemical and biological parameters of an ecosystem.

Nonetheless, measuring the pH of rainwater and surface water in affected areas is the best method for identifying changes in acid deposition over time in a region. Atmospheric deposition refers to the transfer of air pollutants from the atmosphere to the earth's surface through both wet and dry processes. Thus the correct answer is OptionC.

For such more questions on Atmospheric deposition:

brainly.com/question/14708411

#SPJ11

Are you closer to the equator in northern Argentina or southern Spain?
a.Northern Argentina
b. Southern Spain

Answers

Southern Spain is further from the equator than northern Argentina. In this instance, Northern Argentina is closer to the equator than Spain, which is far from the equator and close to the North Pole. Option A is correct .

What makes the equator unique?

The length of the equator is just under 25,000 miles. Each of our planet's five main circles of latitude is based on the relationship between the Earth's axis of rotation and its orbit around the sun. The equator is the longest of these circles because the Earth bulges at the center. The phrase circulus aequator diei et noctis, which means "circle equalizing day and night" and is derived from the Latin word aequare, which means "make equal," is where the name comes from. Due to the Earth's tilt, countries on or near the equator experience year-round high temperatures. In these nations, the temperature hovers around 31 degrees Celsius on average.

To learn more about Argentina visit :

https://brainly.com/question/2165784

#SPJ1

1 Which texture below best represents the igneous rock granite? Not yet answered Select one: Marked out of 5.0 O a. Glassy O b. Aphanitic Flag question O c. Phaneritic Question 2 Which texture best represents the igneous rock obsidian? Not yet answered Select one: Marked out of 5.0 O a. Phaneritic O b. Aphanitic P Flag question O c. Porphyritic O d. Glassy O e. Liquid Question 3 If quartz is present in an igneous rock, what composition must it be? Not yet answered Select one: Marked out of 5.0 O a. Ultramafic O b. Mafic Flag question O c. Intermediate O d. Felsic

Answers

Phaneritic is the texture of the igneous rock granite. Glassy is the texture best represents the igneous rock obsidian.

Plagioclase, alkali feldspar, and quartz make up the majority of the granite intrusive igneous rock. It originates from silica- and alkali-metal-rich lava that progressively cools and solidifies underground. It is prevalent in the igneous intrusions that make up the Earth's continental crust. From a few millimetres wide to batholiths exposed over hundreds of square kilometres, they are all different sizes. Granite is an example of the wider family of granitic rocks known as granitoids, which are mostly made up of feldspars and coarse-grained quartz in different amounts.

Learn more about granite here:

https://brainly.com/question/30717890

#SPJ1

Identify and give an example of 5 factors that would explain the developmental disparity between the countries North of the Brandt line and the countries South of the Brandt line

Answers

Answer:

The Brandt line is an imaginary line across the globe that divides the richer North from the poorer South based on their economic status. It was introduced in the 1970s by Willy Brandt, a former West German Chancellor, as a visual representation of the North-South divide. The line roughly passes through 30 degrees north and circles the world between the United States and Mexico, north of Africa, the Middle East, and most of East Asia and is lowered towards the south to include Japan, Australia, and New Zealand above the line.

According to the Brandt line, countries located north of the line are considered richer, developed, and industrialized, while those located south of the line are generally considered less developed, poor, and often characterized by low-income, poor infrastructure, and political or cultural marginalization. However, the Brandt line is now considered too simplistic as it doesn't reflect the changes that have occurred in the world over the last 20 years.

This question is a little out of date, however, if you wish to jump in a time machine and go back 30 or 40 years, the developmental disparity between the countries North of the Brandt line and the countries South of the Brandt line can be attributed to economic inequality and economic power, historical, political, and geographical causes, environmental factors, education and health, and political instability and conflict

Explanation:

1. Economic inequality and economic power: The North-South divide is characterized by a significant gap in economic power and income levels. The North is wealthier and more economically developed than the South. The persisting income gap between the North and South can be attributed to lower growth rates across the South and a lack of catch-up growth. Even though the rising economic power of the global South has been notable, the OECD states still retain greater aggregate economic power than China and the whole of the rest of the global South combined.

2. Historical, political, and geographical causes: Uneven development is caused by a combination of historical, political, and geographical factors. Some countries have had better access to resources, while others have been exploited. Colonialism, imperialism, and unequal trade relationships have contributed to this disparity. Additionally, some regions are more prone to natural disasters or have less fertile land.

3. Environmental factors: Environmental factors can also contribute to developmental disparities. Countries that are located in regions with harsh environments, such as deserts or areas prone to natural disasters, may be less developed. Climate change can exacerbate these disparities by making it more difficult for countries to access resources or by increasing the frequency of natural disasters.

4. Education and health: Education and health are significant indicators of development. Countries that invest in education and health tend to have higher levels of development than those that do not. Countries in the North tend to have better education and healthcare systems than those in the South, which contributes to the developmental disparity.

5. Political instability and conflict: Political instability and conflict can also contribute to developmental disparities. Countries that are experiencing conflict or political instability may struggle to attract investment or develop their economies. These factors can also lead to displacement, which can further exacerbate developmental disparities.

This thinking is about 20 years out of date. For example, countries like China and India, which were previously considered poor, have now become newly industrialized and are becoming richer.

what is type of rock that forms from an existing rock that is changed by heat, pressure, or chemical reactions?

Answers

The type of rock that forms from an existing rock that is changed by heat, pressure, or chemical reactions is called metamorphic rock. Metamorphic rocks are formed by the transformation of pre-existing rocks through the effects of high temperature and pressure or through the effects of chemically active fluids.

Some common examples of metamorphic rocks include schist, slate, gneiss, and marble. Schist forms from shale, while slate forms from the fine-grained sedimentary rock that consists mainly of clay minerals, and gneiss forms from granite.

Metamorphic rocks are generally classified based on their texture, which is determined by the size and arrangement of their mineral grains. They can also be classified based on their mineralogy, which is determined by the types of minerals present in the rock. Metamorphic rocks can be foliated, meaning that they have a layered or banded appearance, or they can be non-foliated, meaning that they lack a layered or banded appearance.The formation of metamorphic rocks is influenced by factors such as temperature, pressure, and the presence of chemically active fluids.

For such more questions on metamorphic rock:

brainly.com/question/828572

#SPJ11

Of the following solutions, which has the greatest buffering capacity? Explain. A) They would all have the same buffer capacity. B) 0.821 M HF and 0.217 M NaF C) 0.100 M HF and 0.217 M NaF D) 0.821 M HF and 0.909 M NaF E) 0.121 M HF and 0.667 M NaF

Answers

We know the formula β = (d[A-] / dpH) / [HA] by using this formula we can say that option B has the highest buffer.

A) 0.821 M HF and 0.217 M NaF

pH = pKa + log([A-]/[HA])

pH = 3.17 + log(0.217/0.821) = 2.54

β = 0.0025

B) 0.821 M HF and 0.909 M NaF

pH = 3.17 + log(0.909/0.821) = 3.27

β = 0.0036

C) 0.100 M HF and 0.217 M NaF

pH = 3.17 + log(0.217/0.100) = 3.67

β = 0.0022

D) 0.121 M HF and 0.667 M NaF

pH = 3.17 + log(0.667/0.121) = 4.15

β = 0.0022

thus, we can see that option B has the highest buffer capacity coefficient and also would have the highest buffering capacity.

To learn about buffer capacity visit:

https://brainly.com/question/26987857?referrer=searchResults

#SPJ4

Which life-form existed on Earth for the shortest period of time? 1. dinosaurs 2. trilobites 3. ammonoids 4. placoderm fish a 1 b 2 OO с 3 d 4

Answers

Dinosaurs existed on Earth for the shortest period of time. The correct option to choose from the given alternatives is option "a" dinosaurs.

Dinosaurs are prehistoric creatures that lived on Earth from the late Triassic period to the end of the Cretaceous period, which was approximately 230 million to 66 million years ago.

During this period, dinosaurs roamed the planet's land masses and are now considered to be one of the most successful species in Earth's history.

Unfortunately, after millions of years of existence on the planet, the era of the dinosaurs came to an end when a massive asteroid collided with Earth, causing mass extinctions of plant and animal species, including the dinosaurs.

This mass extinction event happened about 66 million years ago. The only dinosaurs that survived this catastrophic event were the ones that evolved into modern-day birds, which are the only known descendants of dinosaurs.

So, dinosaurs existed on Earth for the shortest period of time.

For such more question on dinosaurs:

https://brainly.com/question/30901217

#SPJ11

Are there any mammals living in the Amazonka river?

Answers

Answer: If you meant *Amazon river, then answer is yes.

Explanation:

There are many mammals that live in and around the Amazon River. The Amazon River basin is home to an incredibly diverse range of mammal species, including many that are endemic to the region.

Some of the most well-known mammals that live in the Amazon River include:

Pink River Dolphin: Also known as the Boto, the Pink River Dolphin is a freshwater dolphin that lives exclusively in the Amazon River system.

Giant Otter: The Giant Otter is the largest member of the weasel family and can be found in the rivers and streams of the Amazon basin.

Capybara: The Capybara is the largest rodent in the world and is found throughout the Amazon basin.

Amazon River Manatee: Also known as the Amazonian Manatee, this large, herbivorous mammal lives in the slow-moving rivers, lakes, and flooded forests of the Amazon basin.

Jaguar: The Jaguar is the largest cat in the Americas and can be found in the Amazon rainforest.

These are just a few examples of the many mammal species that call the Amazon River home.

according to the model in which that active galactic nuclei are powered by supermassive black holes, the energy released as light comes from

Answers

Answer:

b

Explanation:

what is the deepest inland body of water in the world?

Answers

Answer:

Caspian Sea

Explanation:

Fill in the table with the terms that best describe these landforms plains and Plateaus

Answers

Plateaus and Plains are the two landforms, Low-lying, level terrain is known as a plain. A plateau is a level area that is significantly elevated above the surrounding terrain.

Many different landforms can be produced by endogenic and exogenic forces. A landform is an element of the Earth's solid surface that occurs naturally. Mountains, plateaus, and plains are a few examples.

Plateaus

An elevated area with mostly level land on top is referred to as a plateau. It has a sizable top area and a steep incline on its sides. They are also referred to as tablelands or high plains. About 18% of the earth's land surface is made up of plateaus.

Plains

The most significant landforms on the surface of the earth are plains. The definition of a plain is simply a low-lying, comparatively flat land surface with a very gentle slope and little local relief. The plains cover roughly 55% of the earth's land area. Most of the plain have been formed by deposition of sediments brought down by rivers. Besides rivers, some plains have also been formed by the action of the wind, moving ice and other tectonic activities.

Learn more about Plateaus at:

brainly.com/question/14745523

#SPJ4

Ozone is formed in the atmosphere as a result of the combination of nitrogen oxides (NOx) and volatile organic compounds (VOCs) in the presence of sunlight. This ozone is

Answers

This ozone is a toxic gas, which can have harmful effects on human health when present in high concentrations.

Ozone is formed in the atmosphere as a result of the combination of nitrogen oxides (NOx) and volatile  organic compounds  (VOCs) in the presence of sunlight.

What is ozone?

Ozone (O3) is a molecule that contains three oxygen atoms. It is present naturally in the atmosphere, where it is formed by ultraviolet radiation from the sun and by lightning strikes.

Ozone is also created artificially by human activities, such as burning fossil fuels, which release nitrogen oxides and other pollutants into the air.

The formation of ozone occurs in the atmosphere when nitrogen oxides and volatile organic compounds react with sunlight.

Nitrogen oxides are produced by burning fossil fuels and from other  industrial activities, while volatile organic compounds come from sources such as car exhaust, paints, and solvents.

When these two types of pollutants combine in the presence of sunlight, they form ozone. This is a highly reactive gas that can cause damage to human health and the environment.

Ozone is a major component of photochemical smog, which is a type of air pollution that occurs in urban areas.

In conclusion, ozone is a toxic gas that is formed in the atmosphere as a result of the combination of nitrogen oxides and volatile organic compounds in the presence of sunlight.

It can have harmful effects on human health when present in high concentrations.

TO KNOW ABOUT Ozone :

https://brainly.com/question/14330630#

#SPJ11

What is the theory used when examining the stratigraphy in an archaeological excavation?

Answers

The theory used to examine the stratigraphy in an archaeological excavation is known as the Law of Superposition. This law states that the deeper an archaeological layer is, the older it is relative to the layers above it.

This is because the newer layers were laid down on top of the older layers, which were already in place. This law is used to help archaeologists date the different layers in an excavation, as well as to identify the relative age of artifacts that are found in the layers.

The Law of Superposition has been an invaluable tool in archaeological excavations, as it has allowed archaeologists to gain a better understanding of the past and how it evolved over time.

Know more about Law of Superposition here

https://brainly.com/question/12493909#

#SPJ11

Imagine another solar system, with a star more massive than the Sun. Suppose a planet with the same mass as Earth orbits at a distance of 1 AU from the star. How would the planet's year (orbital period) compare to Earth's year? a) The planet's year would be longer than Earth's year. b) An orbit at a distance of 1 AU would not be possible around a star more massive than the Sun. c) The planet's year would be the same as Earth's. d) The planet's year would be shorter than Earth's year. e)Cannot tell from the information given.

Answers

The planet's year (orbital period) compare to Earth's year is  d) The planet's year would be shorter than Earth's year. The correct option is d.

The planet's year would be shorter than Earth's year if a planet with the same mass as Earth orbits at a distance of 1 AU from the star more massive than the Sun.

What is the solar system?

The solar system is a system of planets orbiting around the sun that is the centre of the system.

According to research, our solar system consists of eight planets that circle around the sun. It is estimated that our sun is a little over four billion years old and that it is in the middle of its life span.

The planets are circular bodies that revolve around a star in their orbits, which are controlled by the star's gravitational pull.

The length of time it takes a planet to circle the sun once is known as the orbital period or year of the planet. It varies from planet to planet depending on the distance between the planet and the sun.

A planet with the same mass as Earth orbits at a distance of 1 AU from the star.

We need to know that one astronomical unit (AU) is the average distance between Earth and the Sun. It is approximately 149,597,870.7 km in length.

Since the planet with the same mass as Earth is orbiting around a star that is more massive than the sun, it will have a higher gravitational pull, resulting in a shorter orbital period or year than Earth's.

The planet's year would be shorter than Earth's year if a planet with the same mass as Earth orbits at a distance of 1 AU from the star more massive than the Sun.

TO KNOW ABOUT orbital period:

https://brainly.com/question/14494804#

#SPJ11

why do geologists classify rocks?group of answer choicesto determine the chemical makeup of the earthrocks are the key to understanding how the earth formedbecause it makes it easier to tell them apartto determine their age

Answers

Geologists classify rocks to group them based on their characteristics and identify their origin. The answer is that ''it makes it easier to tell them apart.''

What are rocks?

Rocks are a naturally occurring solid mixture of minerals or mineral-like materials that make up the Earth's crust. Rock formation can be caused by a variety of factors, including volcanic eruptions, erosion, and sedimentation, among others.

Geologists classify rocks because it makes it easier to identify them based on their unique properties. Geologists can learn a lot about Earth's past and present by studying rocks, as well as how the planet has evolved over time. By classifying rocks, geologists can make educated guesses about their origins and how they have been changed over time.

In conclusion, the answer is that ''it makes it easier to tell them apart.''

See more about geologists at https://brainly.com/question/1126986.

#SPJ11

The early stages of the core-periphery model describe the
A) relationship between the outward appearance of a place and its internal functioning
B) ways that suburban workers commute to urban workplaces
C) relationship between the underlying structure of a society and its outward expressions
D) social and cultural differences between urban and rural people
E) relationship of power and the transfer of resources from less developed to more developed areas

Answers

The early stages of the core-periphery model describe the relationship of power and the transfer of resources from less developed to more developed areas. (option E)

The core-periphery model is a theoretical framework that describes the relationship between different regions of a country or the world. It suggests that there are core areas, which are usually urban or industrialized, and peripheral areas, which are usually rural or less developed.

The model suggests that the core areas are dominant and exploit the peripheral areas for their resources, labor, and markets. This leads to a transfer of resources and wealth from the periphery to the core, perpetuating the uneven development between these regions.

The early stages of the core-periphery model focus on the emergence of this unequal relationship between core and peripheral areas, and how it shapes the economic, political, and social dynamics within and between these regions. Therefore, the correct answer is E) relationship of power and the transfer of resources from less developed to more developed areas.

Learn more about core-periphery here:

https://brainly.com/question/27239349

#SPJ11

if a rock is buried and subjected to high heat and pressure, then uplifted, exposed, eroded away, and deposited, what rock types were involved in the sequence? group of answer choices igneous and sedimentary igneous and metamorphic metamorphic and sedimentary

Answers

The rock types that were involved in the given sequence of events are igneous, sedimentary and metamorphic.

What is rock?

A rock is a natural occurring substance composed of minerals. It is a hard, naturally occurring substance consisting of one or more minerals that have been consolidated into a solid form.

Igneous rocks: Igneous rocks are formed from the cooling and solidification of molten lava or magma.

Extrusive rocks: These rocks are formed from the solidification of lava, which flows onto the surface of the earth.

Intrusive rocks: These rocks are formed when magma cools beneath the surface of the earth.

Sedimentary rocks: Sedimentary rocks are formed from the accumulation and cementation of small rock fragments, mineral grains, and other organic materials.

Metamorphic rocks: Metamorphic rocks are formed from the transformation of existing rocks under conditions of high pressure, high temperature, or both.

Learn more about rocks here:

brainly.com/question/26046551

#SPJ11

why do you think most tree-ring sites are located in the middle and high latitudes and not in the tropics?

Answers

Most tree-ring sites are located in the middle and high latitudes and not in the tropics because of several reasons.

They are as follows:

Climate conditions: It is known that tree rings reveal climatic information, such as the temperature and precipitation of an area. This is because trees produce annual growth rings, which indicate changes in climate from year to year. Trees in the middle and high latitudes experience extreme temperature changes between summer and winter, making it easier to read the tree-ring patterns compared to those in the tropics.

Soil conditions: The soil in the tropics is nutrient-rich, which helps trees grow faster and produce wider rings. It is more challenging to extract the climate information from wider rings, as the rings become less distinct and less sensitive to climate changes.

Agricultural activities: In tropical areas, there is often extensive farming, deforestation, and other human activities. This can destroy the old trees or make it challenging to find trees that have lived long enough to create a reliable tree-ring record. On the other hand, there is less farming and human activity in the middle and high latitudes, allowing for more trees to grow to old ages and creating a better tree-ring record.

Learn more about tree ring at

https://brainly.com/question/28209776

#SPJ11

Continuous areas of the earth's surface that are connected through spatial interaction
a) Functional Regions
b) Territory
c) Formal Regions
d) State

Answers

The earth's surface is divided into functional sections, which are connected via spatial interaction. Their relationships and economic, social, or political roles characterise them.

Which areas are functional?

In geography, a functional region is a space dominated by a node, focal point, or central hub and enclosed by interconnected links. A functional region's main node is surrounded by areas with related trade, communications, or transportation-related common social, political, or economic goals.

Why is the functional region in geography significant?

Geographicians value functional regions because they encompass particular spheres of human activity. Geography is more than just the physical characteristics of the land. Also, it deals with how people relate to space.

To know more about earth's surface visit:-

https://brainly.com/question/9382932

#SPJ1

what is carbon dioxide and what causes it to be released into the atmosphere, contributing to global warming?

Answers

Answer:

CO2 is a greenhouse gas.

Explanation:

Right now, humans are the main cause of CO2 emissions. CO2 comes from burning fossil fuels primarily such as when we run our cars or in power plants.

Hail generally forms
A) within nimbostratus clouds.
B) in association with warm front activity.
C) within cumulonimbus clouds, and sometimes in association with cold front activity.
D) in altocumulus and cirrocumulus clouds.

Answers

Hail generally forms within cumulonimbus clouds, and sometimes in association with cold front activity.

What is hail? Hail is a type of precipitation that falls from the sky in the form of balls or chunks of ice. It's usually created during thunderstorms when the storm's updrafts carry water droplets high into the atmosphere. If the storm's upper atmosphere is cold enough, those droplets will freeze into ice, eventually becoming hailstones.

Hailstones grow as they are bounced around inside the storm's clouds by the storm's winds, accumulating more and more layers of ice. Finally, they become too heavy for the updrafts to keep aloft, and they fall to the ground at speeds of up to 100 miles per hour.

Where does hail form? Hailstones are usually created within cumulonimbus clouds, which are large, dense, and tall thunderstorm clouds. Cumulonimbus clouds have a lot of internal updrafts and downdrafts, which can create the turbulent conditions necessary for hail formation.

However, hail can also form in association with cold front activity, where cold air collides with warm, moist air. Cold fronts can create unstable atmospheric conditions that are similar to those found in thunderstorms, leading to hail formation.

To know more about atmospheric conditions refer here:https://brainly.com/question/1561787#

#SPJ11

Numeric dating is accomplished by assigning ages in years to rocks using _____ dating methods. A. Analytical B. Commonsense C. Relative.

Answers

Option c. is the correct answer. Numeric dating is accomplished by assigning ages in years to rocks using relative dating methods.

Relative dating is the process of comparing different items to determine the age of an item relative to the other items.

It does not provide an exact age for a rock, but rather allows us to determine the age of a rock relative to other rocks or events.

For example, a rock layer that is lower than another rock layer must have formed before the upper layer.

Relative dating is used to determine the age of rocks by looking at the order in which they were formed and their positions in the stratigraphic column.

It is also used to compare and contrast different objects to determine their age.

For example, if two rocks have the same relative age, they are both older than any rock found above them and younger than any rock found below them.

Relative dating is based on the assumption that certain layers of rock were deposited at a certain time in the past, and that the ages of the layers can be determined by comparing them to one another.

This method does not provide an exact age, but it can provide a general range for the age of the rock.

Additionally, relative dating can be used to infer the age of fossils found in sedimentary rocks.

Relative dating is an important tool for understanding Earth’s history, as it allows us to place events in the correct temporal order.

By understanding the ages of different rocks and fossils, scientists can determine the rate of changes in Earth’s environment over time.

This is an important tool in reconstructing past environments and determining the history of the Earth.

To know more about Numeric Dating here

https://brainly.com/question/30838987

#SPJ11

precession of the rotation axis of earth is caused by

Answers

Precession is caused by the gravitational influence of the Sun and the Moon acting on Earth's equatorial bulge. To a much lesser extent, the planets exert influence as well. The projection onto the sky of Earth's axis of rotation results in two notable points in opposite directions: the north and south celestial poles.

on the 21st of december which hemisphere has no sunrise between 66.5 degrees of latitude and the pole?

Answers

It would take place in the Northern hemisphere.

How does the Coriolis effect affect the Southern Hemisphere?

Answers

The result of Earth's rotation on the weather patterns and ocean currents. The Coriolis effect makes storms swirl clockwise in the southern hemisphere and counter-clockwise in the Northern hemisphere.

1. this fossil will have a space remaining in a rock where the original fossil was____ (MOLD) 2. this fossil is replaced with minerals such as silica and calcite is called____ (CAST) 3. fossils such as footprints, coprolites, and burrows is called____

Answers

1. This fossil will have a space remaining in a rock where the original fossil was (MOLD)

2. This fossil is replaced with minerals such as silica and calcite is called (CAST)

3. Fossils such as footprints, coprolites, and burrows are called trace fossils

What are fossils?

Fossils are the prehistoric remains of animals, plants, or other life forms that have been preserved by natural means. This is accomplished by the transformation of organic and inorganic materials into rock or other solid forms. Fossils come in a variety of shapes and sizes, and they can be found all over the world. These clues, when studied closely, can reveal a lot about how life on earth has evolved over time.

The three types of fossils are:

Mold fossils

A mold fossil is formed when a fossilized organism decays and leaves an impression in the rock. A cavity that has been filled with mineral matter is referred to as a mold. These fossils offer insight into the original organism's shape and size.

Cast fossils

A cast fossil is formed when a mold fossil is filled with mineral material. When minerals like silica, calcite, or pyrite fill the cavity left by a mold fossil, a cast fossil is formed.

Trace fossils

Trace fossils are fossils that are not the actual remains of the organism. Footprints, trails, burrows, and other signs of life that have been preserved in sedimentary rock are examples of trace fossils. These clues can be used to identify the organism that made them, as well as its behavior and environment.

Learn more about Fossils here: https://brainly.com/question/28122522

#SPJ11

Which is not a type of stress seen in rocks? shear stress transitional stress compressional stress tensional stress​

Answers

Answer:

There is no type of stress that is not seen in rocks among the options given. All four types of stress listed are commonly observed in rocks: shear stress, transitional stress, compressional stress, and tensional stress.

Shear stress occurs when rocks are subjected to forces that cause them to slide or twist along parallel planes, resulting in shearing or tearing of the rock.

Transitional stress occurs when rocks are subjected to forces that cause them to change shape or deform without breaking or cracking, such as bending or folding.

Compressional stress occurs when rocks are subjected to forces that push them together or cause them to be squeezed or shortened, resulting in deformation or folding.

Tensional stress occurs when rocks are subjected to forces that pull them apart or stretch them, resulting in the development of cracks or fractures.

Explanation:

Answer:

Stress during the transition period. This is NOT a sort of stress found in rocks.

Transitional stress is a sort of social stress that signifies mental tension that occurs as a result of life transitions and derives from one's connections with others and from society. Geological stresses are applied to rocks.

Explanation:

brainliest pls

what the meaning of Troposphere?

Answers

The troposphere, the lowest part of the atmosphere, is where all of Earth's weather occurs. The tropopause, a layer of air that divides the troposphere from the stratosphere, and the Earth's surface are what hold the troposphere together at its top and bottom, respectively.

The lowest part of Earth's atmosphere is called the troposphere. The majority of meteorological occurrences take place there, which also comprises 99% of the entire mass of water vapour and aerosols and 75% of the overall mass of the planetary atmosphere.

The troposphere is typically 18 km (11 km) above Earth's surface in the tropics, 17 km (11 mi) above it in the middle latitudes, and 6 km (3.7 mi) above it in the high latitudes of the polar regions in winter. This makes the troposphere's average height 13 km (8.1 mi; 43,000 ft).

Learn more about troposphere

https://brainly.com/question/30827755

#SPJ4

in 2000, a population of a city is 1,000,000 people. If it has a doubling time of 25 years, when will its population reach 2,000,000

Answers

If the city's population has a doubling time of 25 years, it means that it will take 25 years for the population to double. To calculate the annual growth rate, we can use the rule of 70, which states that to find the number of years it takes for a quantity to double, we can divide 70 by the annual growth rate.

So, to find the annual growth rate, we can use the formula:  Annual growth rate = 70 / doubling time  Annual growth rate [tex]= 70 / 25 = 2.8%[/tex]   Now, to find when the population of the city will reach 2,000,000, we can use the formula for exponential growth:[tex]Nt = N0 x (1 + r)^t[/tex]   where Nt is the future population, N0 is the initial population, r is the annual growth rate, and t is the time period.We know that [tex]N0 = 1,000,000, Nt = 2,000,000, and r = 2.8%[/tex].[tex]2,000,000 = 1,000,000 x (1 + 0.028)^t[/tex] Taking the natural logarithm of both sides, we get: [tex]ln(2) = t x ln(1.028)[/tex]  Solving for t, we get: [tex]t = ln(2) / ln(1.028) = 25.7[/tex] years  the city's population will reach 2,000,000 in approximately 26 years, or in the year 2026.

To learn more about annual click the link below:

brainly.com/question/28541432

#SPJ1

Other Questions
identify the epidemiologic triad, including host, agent, and environmental factors as related to hiv. The following is a list of prices for zero-coupon bonds of various maturities. a. Calculate the yield to maturity for a bond with a maturity of (i) one year; (ii) two years; (iii) three years; (iv) four years. Assume annual coupon payments. (Do not round intermediate calculations. Round your answers to 2 decimal places.) YTM Maturity (Years) 1 Price of Bond $ 945.90 $ 911.47 % 2 % 3 $ 835.62 % % 4 $ 770.89 b. Calculate the forward rate for (i) the second year; (ii) the third year; (iii) the fourth year. Assume annual coupon payments. (Do not round intermediate calculations. Round your answers to 2 decimal places.) Maturity (years) 1 2 3 4 Price of Bond $ 945.90 911.47 835.62 770.89 Forward Rate Maturity (Years) 2 3 $ % Price of Bond 911.47 835.62 770.89 $ $ 4 % The following is a list of prices for zero-coupon bonds of various maturities. a. Calculate the yield to maturity for a bond with a maturity of (i) one year; (ii) two years; (iii) three years; (iv) four years. Assume annual coupon payments. (Do not round intermediate calculations. Round your answers to 2 decimal places.) Answer is complete and correct. Maturity (Years) YTM 1 $ 5.72 % $ Price of Bond 945.90 911.47 835.62 770.89 2 3 4.74 6.17 >>> % % % 4 S 6.72 b. Calculate the forward rate for (i) the second year; (ii) the third year; (iii) the fourth year. Assume annual coupon payments. (Do not round intermediate calculations. Round your answers to 2 decimal places.) Maturity (years) 1 2. 3 4 Price of Bond $ 945.90 911.47 835.62 770.89 Answer is complete but not entirely correct. Price of Bond Forward Rate Maturity (Years) 2 $ 911.47 3.79 % 3.60 X % 3 $ 835.62 4 770.89 2.89 x % which of the following terms refers to a party's obligation to pay the instrument without resorting to any other party? Which of the following is the major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone?Imine assuming the conditions for inference have been met, does the coffee shop owner have sufficient evidence to conclude that the distribution of sales is proportional to the number of facings at a 5 percent level of significance? conduct the appropriate statistical test to support your conclusion. 1)A factory makes propeller drive shafts for ships. A quality assurance engineer at the factory needs to estimate the true mean length of the shafts. She randomly selects four drive shafts made at the factory, measures their lengths, and finds their sample mean to be 1000 mm. The lengths are known to follow a normal distribution whose standard deviation is 2 mm. Calculate a 95% confidence interval for the true mean length of the shafts. Input your answers for the margin of error, lower bound, and upper bound.a)Determine Margin of Error for this 95% confidence interval.b)Input the lower bound. (Round to three decimal places)c)Input the upper bound. (Round to three decimal places)2)To assess the accuracy of a laboratory scale, a standard weight that is known to weigh 1 gram is repeatedly weighed a total of n times and the mean of the weighings is computed. Suppose the scale readings are normally distributed with unknown mean and standard deviation = 0.01 g. How large should n be so that a 95% confidence interval for has a margin of error of 0.0001?3)A medical researcher is working on a new treatment for a certain type of cancer. The average survival time after diagnosis for the standard treatment is two years. So the null hypothesis is that average survival time after diagnosis is the same for the new treatment and the standard treatment.In an early trial, she tries the new treatment on three subjects, who have an average survival time after diagnosis of 4.5 years. Even though the sample is small, the results are statistically significant at the 0.05 significance level. Consequently, she rejects the null hypothesis.In a future study, it is determined that the new treatment does not increase the mean survival time in the population of all patients with this particular type of cancer. The researcher hasCommitted a type I error.Incorrectly used a 0.05 significance test when she should have computed the P-value.Incorrectly used a 0.05 significance level when she should have used a 0.01 significance level.Committed a type II error.4)If the level of significance, {"version":"1.1","math":"\alpha"}, is made very small, thereby making the probability of committing a Type 1 error very small, what happens to the probability of committing a Type 2 error?By reducing the probability of committing a Type 1 error, we increase the probability of committing a Type 2 error.There is no specific relationship between the two probabilities.By reducing the probability of committing a Type 1 error, we also reduce the probability of committing a Type 2 error.The relationship between the two probabilities depends on how the study is set up. health condition that results in difficulty tolerating wheat, rye, and barley Someone do this for me For each of the situations below, a charged particle Part B enters a region of uniform magnetic field. Determine the direction of the force on each charge due to the magnetic field. Determine the direction of the force on the charge due to the magnetic field. determine the direction of the force on the charge due to the magnetic field?A. vector F points out of the page.B. vector F points into the page.C. vector F points neither into nor out of the page and vector F =/ 0.D. Vector F =0 Which metabolic process is utilized by all energy yielding nutrients and leads to the release of numerous hydrogens which are then used for ATP synthesis Which change to the experimental design would improve the reliability of the engineers' measurements?. using a liquid other than water to determine porosity. using flasks instead of beakersOCtesting single samples from more than three locationsODtesting more samples from each location Let A and B be arbitrary matrices for which the indicated product is defined. Determine whether the statement below is true or false. Justify the answer. The second row of AB is the second row of A multiplied on the right by B. Choose the correct answer below. OA. The statement is true. Let row (A) denote the ith row of matrix A. Then row (AB) = row (A)B. Letting i = 2 verifies this statement OB. The statement is false. The second row of AB is the second row of A multiplied on the left by B. OC. The statement is true. Every row and column of AB is the corresponding row and column of A multiplied on the right by B. OD. The statement is false. Let column (A) denote the ith column of matrix A. Then column (AB) =column (A)B. The same is not true for the rows of AB. What is total war? a hydrostatic transmission has a pump displacement of 1 cir and a motor displacement of 19 cir. the volumetric efficiency of the pump is 94 % and the volumetric efficiency of the motor is 94 %. the mechanical efficiency of the pump is 95 % and the mechanical efficiency of the motor is 93 %. what is the speed ratio of the hst in :1? What types of family patterns have been associated with the development of eating disorders? Write the equation of a line that is perpendicular to y=x - 9 and passes through the point (3, -2). Factor completely.mx^2-my^2Thank you :DD Simplify (number on picture) to an expression involving a single trig function with no fractions. If needed, enter squared trigonometric expressions using the following notation Men are more likely to experience impaired hearing than women partly because of:A. gender-related differences in osteoporosis.B. genetically determined differences in presbycusis.C. gender-related occupational choices.D. genetically determined differences in presbyopia. In Worcester v. Georgia (1832), the Marshall Court defined the Indian tribes as ______ in much the same way that Georgia was. sovereign entities.