The difference between a web app and a mobile app is that the program code for Web apps _________, whereas mobile apps are stored on the handheld device, so they have to be ___________.
answer choices
is downloaded and installed, retrieved from the cloud
arrives only when you use the app, downloaded and installed
is downloaded and installed, retrieved only when you use the app none of the above

The output torque at gear D cannot be determined without additional information about the gear system. However, there are different formulas and methods that can be used to calculate output torque based on the input torque, gear transmission ratio, and gear efficiency, among other factors .

For instance, if the input torque is 10 ft lb and the gear transmission ratio is 1:1, then the output torque at gear D would also be 10 ft lb assuming no losses due to friction or other factors. However, if the gear system has different transmission ratios or efficiencies, then the output torque at gear D could be higher or lower than 10 ft lb . More specific information about the gear system and its properties would be required to determine the output torque at gear D.

Find out more about Torque

brainly.com/question/30805985

#SPJ4

The TCP metadata is the part of the packet that contains the sequencing information that's used by TCP to reassemble packets.TCP metadata:Transmission Control Protocol (TCP) is a network protocol that governs how data is transmitted over the internet.

It uses packets to send data, and each packet includes TCP metadata that is critical for successful delivery. In particular, the TCP metadata in a packet is used to identify which packet it is, as well as the sequence number of that packet.Packet-based messaging systems like the Internet Protocol are designed to send data in packets. The problem with these systems is that packets can arrive out of order, which makes it difficult to reassemble the data on the receiving end. TCP is a protocol that can handle out-of-order packets by using the metadata in each packet to identify which packet it is and where it belongs in the sequence.

In summary, the TCP metadata is the part of the packet that contains the sequencing information that's used by TCP to reassemble packets.

Learn more about TCP : https://brainly.com/question/14280351

#SPJ11

Considering a situation where swap operation is very costly, the sorting algorithm that should be preferred so that the number of swap operations are minimized in general is Insertion Sort.

This is because Insertion Sort performs very few swap operations as compared to other sorting algorithms such as Selection Sort, Heap Sort, and Merge Sort.Insertion Sort algorithm. Insertion sort is a sorting algorithm that builds the final sorted list one item at a time. It is less efficient on large lists than more advanced algorithms such as quicksort, heapsort, or merge sort. However, insertion sort is one of the fastest algorithms for sorting very small arrays, even faster than quicksort; indeed, good quicksort implementations use insertion sort for arrays smaller than a certain threshold, also when arising as subproblems; the exact threshold must be determined experimentally and depends on the machine, but is commonly around ten.

Learn more about Insertion Sort: https://brainly.com/question/13326461

#SPJ11

Edge computing solutions are ideal for scenarios where there is a need for real-time processing, low-latency, and high-bandwidth data processing at the edge of a network.

Such scenarios include hospital departments that perform high-risk, time-sensitive surgeries, industrial automation systems, and autonomous vehicles. These solutions can also be used in remote locations where there is limited or unreliable connectivity to centralized servers.

In the given options, the hospital department that performs high-risk, time-sensitive surgeries would be an ideal scenario for using edge computing solutions. In this scenario, the use of edge computing solutions can help ensure that critical data is processed in real-time, and there is minimal latency. The use of edge computing can also help ensure that the data is processed locally, reducing the need for data to be transmitted to a central server, thereby reducing the risk of network connectivity issues. Overall, edge computing solutions can help ensure that life-critical processes are executed accurately and on time.

Find out more about edge computing

brainly.com/question/23858023

#SPJ4

To create a group managed service account in PowerShell on a Windows Server 2016 domain controller, you should use the New-ADServiceAccount cmdlet.

The New-ADServiceAccount cmdlet creates a new service account in Active Directory Domain Services (AD DS). It is designed specifically for creating group managed service accounts (gMSAs), which are a type of service account that can be used to manage services running on multiple servers.

Here's an example of how to use the New-ADServiceAccount cmdlet to create a new gMSA:

New-ADServiceAccount -Name MyServiceAccount -Enabled $true -DNSHostName MyServer.mydomain.com -PrincipalsAllowedToRetrieveManagedPassword "MyServer$"

In this example, MyServiceAccount is the name of the new gMSA that will be created. The -Enabled $true parameter specifies that the account should be enabled. The -DNSHostName MyServer.mydomain.com parameter specifies the DNS name of the server that will use the gMSA. The -PrincipalsAllowedToRetrieveManagedPassword "MyServer$" parameter specifies which computers are allowed to retrieve the gMSA password for use by services running on those computers.

You can learn more about windows server 2016 at

https://brainly.com/question/14526761

#SPJ11

When data is anonymized, the PII is eliminated or encrypted. PII includes names, Social Security numbers, addresses, and more and stands for personally identifiable information. The answer is (b).

PII refers to any information that can be used to identify an individual. This includes both direct identifiers such as name, address, and Social Security number, as well as indirect identifiers such as IP address and location data. Anonymization is the process of removing or encrypting PII from data sets to protect individuals' privacy and prevent unauthorized access to sensitive information.

You can learn more about personall  identifiable information at

https://brainly.com/question/30023988

#SPJ11

The purpose of creating abstract and concrete classes from a UML diagram is to establish a class hierarchy and structure.

What is the purpose of creating abstract and concrete classes from a UML diagram?

Programming and Data Structures Programming Project 1:

Exception Handling, File I/O, Abstract Classes, Interfaces Activity objectives At the end of this activity, students should be able to:Create abstract and concrete classes from a UML diagramMake classes implement interfacesUse Java exception handling mechanisms to throw and catch exceptionsAccess text files for reading and writingUse the Java API sort method to sort objects.

The class Event is now abstract and it implements the interface Comparable. The classes Appointment and Meeting are unchanged. The classes Date and Time are unchanged except for implementing the interface Comparable.1. Create Abstract and Concrete Classes from a UML Diagram First, let's look at the updated UML diagram.  We are required to create abstract and concrete classes from a UML diagram, so here is what we will do:Create an abstract class named Event that implements the Comparable interface. Create a concrete class named Appointment that extends the Event class. Create a concrete class named Meeting that extends the Event class.

Create a concrete class named Date that implements the Comparable interface. Create a concrete class named Time that implements the Comparable interface.2. Make Classes Implement InterfacesIn the updated UML diagram, Event implements the Comparable interface. The Appointment and Meeting classes inherit from Event and do not need to implement Comparable. The Date and Time classes both implement the Comparable interface.3. Use Java Exception Handling Mechanisms to Throw and Catch ExceptionsWe can use try-catch blocks to catch and handle exceptions. When an exception occurs within a try block, the exception is caught by the catch block.

The catch block contains code that handles the exception.4. Access Text Files for Reading and WritingJava provides several classes for reading and writing files. These classes are located in the java.io package. Some of the most commonly used classes for file I/O are:File: Used to represent a file or directory on the file system.FileReader: Used to read characters from a file.FileWriter: Used to write characters to a file.

Buffered Reader:

Used to read lines of text from a character stream.

Print Writer:

Used to write formatted text to a character stream 5. Use the Java API Sort Method to Sort Objects that Implement the Interface ComparableThe Java API includes a sort method that can be used to sort arrays of objects that implement the Comparable interface. The Comparable interface defines a compareTo method that is used to compare two objects. The sort method uses this method to sort the array in ascending order.

Here's an example of how to use the sort method to sort an array of objects that implement the

Comparable interface:

Arrays. Sort(array Name);In conclusion, in order to complete Programming and Data Structures Programming Project 1: Exception Handling, File I/O, Abstract Classes, Interfaces you should create abstract and concrete classes from a UML diagram, make classes implement interfaces, use Java exception handling mechanisms to throw and catch exceptions, access text files for reading and writing, use the Java API sort method to sort objects that implement the interface Comparable.

Learn more about: UML diagram

brainly.com/question/29221236

#SPJ11

The manufacturer of "Allay" pain reliever offered a free sample of the product to visitors who registered at its website. In this case, the communications objective of the website was to stimulate trial.

What is allay's technology platform?

Allay's technology platform combines approved topical analgesics and biopolymers into soluble candidates for targeted pain relief for days, weeks, or longer.

What are allay's first product candidates?

Allay's first product candidates are designed to provide the weeks of pain relief needed for a successful transition to postoperative rehabilitation while minimizing the need for constant re-dosing, clinical monitoring and the drawbacks of systemic analgesics such as opioids.

To know more about allay's visit:

https://brainly.com/question/2054931

#SPJ1

The benchmark program's execution time on a 40 MHz processor is 3.57 ms, its effective CPI is 1.4, and its MIPS rate is 28.

As an alternative, you can calculate MIPS by dividing CPU cycles per second by CPU cycles per instruction, then multiplying the result by 1,000,000. For example, if a computer had a CPU running at 600 MHz and a CPI of 3, then 600 MHz/3 = 200 and 200 MHz/1 million = 0.0002 MIPS.

To calculate the CPI in any given year, divide the price of the market basket in year t by the price of the same basket in the base year. In 1984, the CPI was $75/$75.

To know more about processor visit:-

https://brainly.com/question/28902482

#SPJ1

Software-defined Networking arose due to a diversity of different network equipment (e.g., routers, switches, firewalls, etc.) using different protocols that made managing the network difficult, and a lack of a central platform to control network equipment.

It is a solution to the limitations of traditional networking, which makes it difficult to manage the network as the network becomes more complex. SDN allows for network management to be done through software rather than through physical hardware, making it easier to manage and maintain.The key benefits of SDN are that it makes it easier to manage the network, and it is more agile, scalable, and adaptable to changing business requirements. With SDN, the network can be programmed and managed centrally, making it easier to manage network resources and troubleshoot issues.

Learn more about Software-defined Networking: https://brainly.com/question/30766524

#SPJ11

There are three types of data dependencies that can cause data hazards: RAW (Read-After-Write), WAW (Write-After-Write), and WAR (Write-After-Read).

In the given code snippet, the following data dependencies exist:

RAW dependence: instruction 2 reads from memory location pointed by R3, and instruction 6 writes to memory location pointed by R3. Since instruction 6 writes to memory before instruction 2 reads from it, this creates a RAW dependency.

RAW dependence: instruction 4 reads the values from registers R4 and R5, both of which are written by instructions 2 and 3. Therefore, instruction 4 has RAW dependence on both instructions 2 and 3.

RAW dependence: instruction 5 reads the values from registers R6 and R7, both of which are written by instructions 4 and 2, respectively. Hence, instruction 5 has a RAW dependence on instruction 4 and instruction 2.

WAW dependence: instruction 1 writes to register R2, and instruction 7 also writes to the same register. As both of these instructions write to the same register, this creates a WAW dependency.

Therefore, there are a total of 4 data dependencies in the given code snippet: 3 RAW and 1 WAW.

Learn more about data hazards on:

https://brainly.com/question/17184351

#SPJ1

Option-C: The wireless transmission type that requires a clear line of sight (LOS) to function is Infrared (IR).

 Wireless transmission is the transmission of data over wireless media, such as electromagnetic radiation or free space optical communication. It is a kind of communication in which electromagnetic waves are used to carry information from one point to another, where the receiver decodes the information and uses it.Wireless communication is an essential aspect of modern communication. Bluetooth, Wi-Fi, and near-field communication (NFC) are some of the wireless technologies that have revolutionized communication in the last decade.

All of these technologies have one thing in common: they transmit signals wirelessly.The answer to the question is option C, Infrared (IR), because it requires a clear LOS to function. Infrared communication necessitates a clear line of sight between the sender and the receiver to function effectively. If the LOS is interrupted, the communication signal will be disrupted, resulting in a loss of signal strength and quality.

For such more questions on line of sight (LOS) :

brainly.com/question/29751137

#SPJ11

A Python code that calculates the future value of an investment given the interest rate, investment amount, and number of years:

investmentAmount = float(input("Enter investment amount: "))

annualInterestRate = float(input("Enter annual interest rate: "))

years = int(input("Enter number of years: "))

monthlyInterestRate = annualInterestRate / 12 / 100

futureValue = investmentAmount * (1 + monthlyInterestRate)**(years * 12)

print("Future value:", futureValue)

This program prompts the user to enter the investment amount, annual interest rate, and number of years using the input() function. Then it calculates the monthly interest rate and the future value using the formula provided in the question.

Finally, it displays the future value using the print() function.

Read more about programs here:

https://brainly.com/question/26134656

#SPJ1

The code to create an index named stu_sub on the columns roll_no and the subject of the stu_subjects table is: CREATE INDEX stu_sub ON stu_subjects(roll_no, subject; So, the correct answer is C.

An index is a database structure that enhances the speed of operations on database tables. When you create an index, you define a relationship between one or more columns in a table and an index structure that improves query efficiency. The syntax for creating an index in SQL is given below:

CREATE INDEX index_name

ON table_name (column1, column2, ...)

WHERE condition; To create an index named stu_sub on the columns roll_no and the subject of the stu_subjects table, the correct syntax is: create index stu_sub on stu_subjects(roll_no, subject);

Hence, option C is the correct answer.

You can learn more about index at: brainly.com/question/14297987

#SPJ11

A linked List is more efficient in terms of memory usage if a list has 180 integers. an array is more efficient than a linked list for a list that has 20 integers. An array and a linked list will require the same amount of memory if the list has 1 element.

(a) Linked List is more efficient in terms of memory usage if a list has 180 integers in it since an array of type int is defined to hold up to 200 ints. An array of size 200 x 4 bytes will consume 800 bytes of memory, whether we use all of the memory or not. While the linked list, which can use memory on a per-node basis, will consume just the right amount of memory that is required for the given number of nodes. Therefore, it will be more effective.

(b) In terms of memory use, an array is more efficient than a linked list for a list that has 20 integers. 20 x 4 bytes = 80 bytes are required for storing an array of 20 integers, whereas an array of 20 integers in the linked list will require 20 nodes x 8 bytes per node = 160 bytes, which is double the amount of memory required for an array.

(c) An array and a linked list will require the same amount of memory if the list has 1 element. A linked list with only one node will require 8 bytes of memory (4 bytes for data, 4 bytes for next reference), while an array with 1 integer element will require 4 bytes of memory.

To know more about the linked list: https://brainly.com/question/20058133

#SPJ11

Answer:

The Turing Test is a method of inquiry in artificial intelligence (AI) for determining whether a computer is capable of thinking like a human being.

Explanation:

This algorithm has a time complexity of O(N), where N is the number of cows, since it iterates over all the cows once. The space complexity is also O(N), since it stores the current sequence of cows in a list.

To solve this problem, you can iterate over the cows from left to right and keep track of the current sequence of cows. When you reach a cow that violates the "lonely" rule, you can discard the current sequence and start a new one.

Here's some pseudocode to illustrate the algorithm:

count = 0

current_sequence = []

previous_breed = None

for i in range(N):

   breed = get_breed_of_cow(i)

   if previous_breed is not None and breed != previous_breed:

       current_sequence.append(breed)

       if len(current_sequence) >= 3:

           if current_sequence.count("G") != 1 and current_sequence.count("H") != 1:

               count += 1

       current_sequence = []

   else:

       current_sequence.append(breed)

   previous_breed = breed

print(count)

In this code, "get_breed_of_cow(i)" is a function that returns the breed of the cow at index "i". The variable "count" keeps track of the number of non-lonely sequences of cows. The variable "current_sequence" keeps track of the current sequence of cows, and "previous_breed" is the breed of the previous cow in the sequence.

The code first initializes the count and the current sequence to empty lists, and sets the previous breed to "None". It then loops over all the cows from left to right, adding each cow's breed to the current sequence. When it encounters a cow with a different breed than the previous cow, it checks whether the current sequence is long enough to be a valid sequence of cows (i.e., at least 3 cows), and whether it violates the "lonely" rule. If the current sequence is valid, it increments the count. It then resets the current sequence to an empty list, and starts a new sequence with the current cow. Finally, it updates the previous breed to be the breed of the current cow.

At the end of the loop, the code prints the count, which is the number of non-lonely sequences of cows.

Find out more about pseudocode  

brainly.com/question/17442954

#SPJ4

An appropriate search algorithm would be a heuristic search algorithm. This type of search algorithm uses a heuristic function to make informed guesses as to which move is most likely to lead to the best solution.

The heuristic function helps to guide the search algorithm toward promising solutions. There are different search algorithms, and each one is useful in solving specific problems.

In solving a word-filling problem, it is better to fill in blanks one letter at a time than one word at a time. This is because it reduces the search space, making it easier and faster to find a solution. By filling in blanks one letter at a time, it is possible to eliminate unlikely candidates early in the search, which speeds up the process.

Filling in blanks one word at a time can create more ambiguity and increase the search space, making it more challenging to find a solution.

To learn more about heuristic search algorithms from here:

https://brainly.com/question/9008084

#SPJ11

Sensitivity levels specify the authorization classification of information assets of an individual user is permitted to access, subject to the need-to-know principle. The correct option is D.

Learn more about information asset here: https://brainly.com/question/14183871

#SPJ11

Answer:

B, bad lighting.

Explanation:

The granules of sand are caused by image noise. Image noise can be defined as appearance of undesired traces and variations in the brightness or color of your image.

Image noise is caused by lighting variation.

There for, the correct answer would be: B, bad lighting.

To open the attendee first name query in design view and add criteria to select only those records where the first name field value begins with lau followed by any other letters, save the changes to the query, open the query in datasheet view, confirm that two records appear in the query results and then close it.

The step is:

1. Open the database that contains the attendee first name query.

2. Click on the "Queries" tab in the Navigation Pane.

3. Right-click on the Attendee First Name query and select "Design View" from the context menu.

4. In the Query Designer window, click on the "Criteria" row in the FirstName field.

5. In the "Criteria" row, type "Lau*" (without quotes) followed by any other letters.

6. Press "Enter" and then click on the "Save" button in the Quick Access Toolbar.

7. Close the Query Designer window.

8. Right-click on the Attendee First Name query in the Navigation Pane and select "Datasheet View" from the context menu.

9. Verify that two records appear in the query results.

10. Close the Attendee First Name query.

Learn more about Queries: https://brainly.com/question/25694408

#SPJ11

It is a logic error to have a positive increment in a For-Next loop that is supposed to loop 10 times when the initial value of the control variable is greater than the final value.

When the control variable's initial value is greater than the final value, a positive increment will cause the loop to terminate before it reaches the final value. The For-Next loop is a control flow statement used in programming to execute a block of code repeatedly. The loop's body is executed until the control variable exceeds the final value specified in the loop statement.

To determine the correct increment, the programmer must determine the initial and final values of the control variable and the number of times the loop should execute. To loop 10 times, the increment should be:

Increment = (Final value - Initial value) / (Number of iterations - 1)

Therefore, if the initial value of the control variable is greater than the final value, the loop will not execute the number of times specified by the programmer, and the program may result in an unexpected output.

You can learn more about logic error at

https://brainly.com/question/28957248

#SPJ11

With respect to language evaluation criteria, the following are the language characteristics that affect readability:

Exception handling

-Syntax design

-Expressivity

-Support for abstraction

-Simplicity

1. Exception handling refers to the mechanisms a programming language uses to handle errors and other types of exceptions.

2.  The syntax of a language refers to its grammar and structure. The more natural a language is, the more readable it is.

3. Expressivity is a characteristic that refers to the language's ability to express complex and diverse constructs.

4. Support for abstraction refers to the language's ability to conceal or hide complicated details of a program.

5. Simplicity is a characteristic that refers to the language's ability to be easily understood and learned.

Learn more about programming languages here: https://brainly.com/question/16936315

#SPJ11

The “Please Wait Until the Current Program is Finished Uninstalling” error message appears when a program that is already in the process of being uninstalled is requested to be uninstalled again.

This is a brief and concise explanation of how to fix the "Please Wait Until the Current Program is Finished Uninstalling" Error on Windows. The error message prevents users from uninstalling programs effectively. In this answer, we will provide you with some effective ways to fix the “Please Wait Until the Current Program is Finished Uninstalling” Error on Windows. The steps are as follows: Method 1: Uninstall the program manually from the registry editor. Method 2: Use a third-party software uninstaller. Method 3: Restart your PC in Safe mode.Method 4: Run a System File Checker scan.Method 5: Try to uninstall the program in Compatibility Mode.Method 6: Run the Program Install and Uninstall Troubleshooter. Method 7: Use a professional Windows repair tool to fix registry issues.

To learn more about Windows :

https://brainly.com/question/30023405

#SPJ11

An Amazon Area Manager is trying to assemble a specialized team from a roster of available associates. The method finds the number of teams that may be formed that satisfy the requirements given a list of associates' skill levels.

An Amazon Area Manager is trying to assemble a specialized team from a roster of available associates. To keep track of the amount of teams that can be established, use the variable teamCount.

The skill levels of the associates are listed in ascending order.

Start with the first associate and work your way to the last as you iterate through the sorted list.

Verify that each associate's skill level falls within the acceptable range. If so, add one to a variable count.

Increase teamCount by 1 if the count is more than or equal to the minimum number of associates necessary for a team.

when each cycle is finished.

Due to the sorting phase, the technique has a time complexity of O(nlogn), where n is the number of associations. If the list is already sorted, the time complexity might be decreased to O(n).

learn more about Amazon here:

https://brainly.com/question/30620555

#SPJ4

The solution that can help resolve the issues with the telephone conversations without discarding any traffic is traffic shaping.

Traffic shaping, also known as “packet shaping,” is the practice of controlling and monitoring network traffic to maximize network bandwidth by imposing a bandwidth limit on the number of packets that can be sent or received during a certain period. This is done in order to reduce network congestion and ensure that critical applications, such as VoIP, are not impacted.

In the above-mentioned scenario, the users were facing issues with their VoIP telephone conversations due to bandwidth constraints. In this case, Benjamin can use the traffic shaping technique to regulate the network traffic and optimize network bandwidth so that users can continue to have VoIP telephone conversations without experiencing any distortion or lost connections. Therefore, traffic shaping could help resolve the issues with telephone conversations without discarding any traffic.

Learn more about traffic shaping:https://brainly.com/question/28147259

#SPJ11

Answer:

desktop publishing software

Explanation:

desktop publishing software

The disadvantages of biometrics are the following:

Biometrics is an automated way of identifying people based on their physical and behavioral characteristics. Biometric identification technology has many advantages over traditional identification methods. However, it also has some drawbacks.

The disadvantages of biometrics include: They can be circumvented by a brute force attack. They have the potential to produce numerous false negatives. The biometric factors for identical twins are the same. When used alone, they are no more secure than a strong password. They require hourly tones.

See more information on biometric identification at: https://brainly.com/question/30762908

#SPJ11

The components that are included in the system on a chip (SoC) are A.central processing unit (CPU) and C.RAM (Random Access Memory).

Smartphones and tablet devices are typically built using a system on a chip (SoC), which is a small integrated circuit composed of several physical components, including a central processing unit (CPU) and a RAM (Random Access Memory). They are capable of executing a variety of digital computing tasks in order to provide efficient performance to the device's users. RAM, a frequently used computing abbreviation, stands for random-access memory. PC memory or just memory are other names for it. RAM is essentially the short-term memory of your laptop or computer. Your computer processor requires this location of the data in order to execute your apps and access your files.

Learn more about RAM: https://brainly.com/question/30459310

#SPJ11

During the EVALUATE ADDRESS step of an LC-3 LDR instruction, the MAR register is changed. Therefore, the correct option is E. MAR.

The rest of the options are discussed below:

a. PC: The Program Counter (PC) register, which keeps track of the address of the current instruction, is not changed in the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

b. NONE: Since MAR is changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction, this answer is incorrect.

c. MDR: Memory Data Register (MDR) is not modified during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

d. DST register: The DST register is not modified during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

e. MAR: The Memory Address Register (MAR) is changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is correct.

f. IR: Instruction Register (IR) is not changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

You can learn more about MAR register at: brainly.com/question/15892454

#SPJ11