Answer:
4.49 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question we have
[tex]volume = \frac{50.75}{11.3} \\ = 4.491150...[/tex]
We have the final answer as
4.49 mLHope this helps you
How many joules are needed to change the temperature of 40 g of water from 33 C to 23 C?
Answer:
Explanation:
Given parameters:
Mass of water = 40g
Initial temperature = 33°C
Final temperature = 23°C
Specific heat capacity of water = 4.2J/g°C
Unknown:
Quantity of heat = ?
Solution:
To solve this problem, we use the expression below;
H = m c Δt
H is the quantity of heat
m is the mass
c is the specific heat capacity
Δt is the change in temperature
H = 40 x 4.2 x (23 - 33) = -1680J
The water will have to lose 1680J of heat to bring it to that final temperature.
which of the following best describes a single-replacement reaction?
A. one element takes the place of another in a compound
B. a compound breaks apart into separate elements
C. two elements combine to form a compound
D. Two elements switch places in two compounds
Answer:
One element takes the place of another in a compound
Explanation:
a p e x - just did the test
The statement best describes a single-replacement reaction as one element takes the place of another in a compound. The correct option is A.
What is a single replacement reaction?A single replacement reaction is one in which when the reaction happens, one element is substituted by another in a compound. It is also called displacement reaction. The replacing material will always be a pure element.
An example is Zn + 2HCl -> ZnCl₂ + H₂
Thus, the correct option is A. one element takes the place of another in a compound.
Learn more about single replacement reaction, here:
https://brainly.com/question/7039713
#SPJ2
In a competition, an athlete throws a discus though the air. What was the average speed of the discus if it traveled 107 meters over a time of 12 seconds?
Answer:
8.92 m/s
Explanation:
Distance covered = 107 m
Time = 12 s
Average speed = ?
The relationship between the parameters is given by;
Average speed = Distance covered / Time
Average speed = 107 / 12
Average speed = 8.92 m/s
How many atoms are in this chemical formula? NaC2H3O2
Answer:
The answer is eight atoms.
How much mass of sodium chloride ( ) should be dissolved in water to make 1.5 L of 0.75 M aqueous solution? The molar mass of is 58.5 g.
Answer:
Mass = 65.8 g
Explanation:
Given data:
Mass of sodium chloride = ?
Volume of solution = 1.5 L
Molarity of solution = 0.75 M
Solution:
Number of moles of sodium chloride:
Molarity = number of moles / volume in L
By putting values,
0.75 M = number of moles = 1.5 L
Number of moles = 0.75 M × 1.5 L
Number of moles = 1.125 mol
Mass of sodium chloride:
Mass = number of moles × molar mass
Mass = 1.125 mol × 58.5 g/mol
Mass = 65.8 g
How many molecules of HCl would react with 1 mole of Mg0?
Mg0 +2HCI
MgCl, + H,0
Answer:
12.044 ×10²³ molecules of HCl
Explanation:
Given data:
Number of moles of MgO = 1 mol
Number of molecules of HCl react = ?
Solution:
Chemical equation:
MgO + 2HCl → MgCl₂ + H₂O
with 1 mole of MgO 2 moles of HCl are react.
Number of molecules of HCl react:
1 mole contain 6.022×10²³ molecules
2 mol × 6.022×10²³ molecules / 1 mol
12.044 ×10²³ molecules
element compound mixture
Why does salt sprinkled on icy roads cause the ice to melt?
Answer:
The actual reason that the application of salt causes ice to melt is that a solution of water and dissolved salt has a lower freezing point than pure water. When added to ice, salt first dissolves in the film of liquid water that is always present on the surface, thereby lowering its freezing point below the ices temperature. Ice in contact with salty water therefore melts, creating more liquid water, which dissolves more salt, thereby causing more ice to melt, and so on.
_____ unit is the most widely used system of units in both science and business
Explanation:
I think the answer is metric system of units
because it is the most widely used system of units and its use in both science and business.
give two example for desert plants and animals?
please mark as brainliest
Answer:
Plants : Cactus, tumbleweed
Animals : camel, fennec fox
Answer:
Desert plant - Cactus & Tumbleweed
Desert animal - Camel & Scorpion
If there is less ionization energy does that mean that it is more reactive? Why?
Answer:
The greater the ionization energy, the more difficult it is to remove an electron. The ionization energy may be an indicator of the reactivity of an element. Elements with a low ionization energy tend to be reducing agents and form cations, which in turn combine with anions to form salts.
According to the second law of energy, most energy is wasted in the form of ________
A. sound
B. heat
C. electricity
D. light
A. 6750 J
B. 387 J
C. 1935 J
D. 3.50 J
Answer:
It was answer
A)1935J
Explanation:
If 125.0g of nitrogen is reacted with 125.0g of hydrogen, what is the theoretical yield of the reaction? What is the excess reactant? What is the limiting reactant? Show your work.
The theoretical yield of the reaction : 151.64 g
The limiting reactant : N₂
The excess reactant : H₂
Further explanationReaction
N₂+3H₂⇒2NH₃
A method that can be used to find limiting reactants is to divide the number of moles of known substances by their respective coefficients(mol ratio), and the smaller become a limiting reactant
mass of N₂=125 g
mol N₂(MW=28 g/mol) :
[tex]\tt mol=\dfrac{mass}{MW}\\\\mol=\dfrac{125}{28}=4.46[/tex]
mass H₂ = 125 g
mol H₂(MW= 2 g/mol) :
[tex]\tt mol=\dfrac{125}{2}=62.5[/tex]
From the equation, mol ratio N₂ : H₂ = 1 : 3
Limiting reactant : N₂ : H₂ =
[tex]\tt \dfrac{4.46}{1}\div \dfrac{62.5}{3}=4.46\div 20.8[/tex]
N₂ : limiting reactant
H₂ : excess reactant
mol NH₃ based on limiting(N₂) (from equation N₂ : NH₃ = 1 : 2)
[tex]\tt mol~NH_3=\dfrac{2}{1}\times 4.46=8.92[/tex]
mass NH₃ (MW=17 g/mol) :
[tex]\tt mass=mol\times MW\\\\mass=8.92\times 17=151.64[/tex]
can bees really fly if so why
(4.2 x 10^8) + (2.6 x 10^6) *
422600000 or 4,226x 10^8
Answer:
422.6*10^6
Explanation:
(4.2*10^8)+(2.6*10^6)
4.2*10^8+2.6+10^6
(4.2*10^2+2.6)*10^6
(4.2*100+2.6)*10^6
(420+2.6)+10^6
Final Answer:
422.6*10^6
Hree friends are talking about what they think causes shiny pennies to turn dull. Deandre says, "I think they turn dull because they're exposed to the air over time." Jamie says, "I think they turn dull because they get dirt on them from being dropped on the ground." Selina says, "I think there is dull metal inside the penny the entire time." Who do you agree with most and why?
Answer:
Deandre is correct.
Explanation:
When shiny pennies turn dull, due to getting rust. It gets cover with a layer of black or brown color on its surface on the exposure of air.
In this problem,
Deandre says, "I think they turn dull because they're exposed to the air over time." Jamie says, "I think they turn dull because they get dirt on them from being dropped on the ground." Selina says, "I think there is dull metal inside the penny the entire time.
Out of three friends, Deandre is correct. Shiny pennies turn dull because they're exposed to the air over time.
ammonium(NH4) react with chlorine then will we get ammonium chloride
Answer:
yes when ammonium(NH4) react with chlorine then will we get ammonium chloride
Explanation:
Pure chlorine gas may react vigorously with ammonia gas. An excessive mix of the two gases in air can produce hazardous compounds such as the explosive nitrogen trichloride. ... Chlorine reacts readily with ammonium hydroxide to form ammonium chloride, a relatively harmless compound.
For the nitrogen fixation reaction 3H2(g) + N2(g) = 2NH3(g),
Kc = 6.0 x 10-2 at 500°C. If 0.253 M H2 and 0.044 M NH3 are
present at equilibrium, what is the equilibrium concentration
of N2?
The equilibrium concentration of N₂ : 1.992
Further explanationGiven
Kc = 6.0 x 10⁻² at 500°C
0.253 M H₂ and 0.044 M NH₃
Reaction
3H₂(g) + N₂(g) = 2NH₃(g)
Required
The equilibrium concentration of N₂
Solution
Kc for the reaction :
[tex]\tt Kc=\dfrac{[NH_3]^2}{[H_2]^3[N_2]}\\\\0.06=\dfrac{0.044^2}{0.253^3\times [N_2]}\\\\(N_2]=1.992[/tex]
how many electrons are in an atom that has 25 protons and has an ion charge of negative 3
Answer:
7
Explanation:
3x6=18 leavig 7 behind
Hi can anyone answer these two distance and time questions
highlight the correct answer - polar or non polar
1. A (polar / non-polar) bond is one where there are more shared electrons grouped around one atom than the other.
2. A (polar / non-polar) bond is one where the electrons are evenly distributed between the two atoms sharing electrons.
3. A molecule with symmetry is (polar / non-polar).
4. A molecule that does not have symmetry is (polar / non-polar).
5. A (polar / non-polar) molecule has its valence electrons evenly distributed around the molecule.
6. A (polar / non-polar) molecule has one of its sides with more or fewer electrons than the other sides.
Answer:
1. Polar
2. Non-polar
3. Non-polar
4. Polar
5. Non-polar
6. Polar
Explanation:
Polar bonds are formed between molecules that share electrons unequally/unevenly. In a polar molecule, one atom is more electronegative than the other i.e it attracts/pulls more electrons than the other atom, hence, it ends up leaving the other atom with a positive charge i.e fewer electrons around its atom. Also, every molecule that has a symmetrical arrangement is NON-POLAR while the opposite is POLAR.
Based on this, the answers to the asked questions are in BOLD.
1. A POLAR bond is one where there are more shared electrons grouped around one atom than the other.
2. A NON-POLAR bond is one where the electrons are evenly distributed between the two atoms sharing electrons.
3. A molecule with symmetry is NON-POLAR
4. A molecule that does not have symmetry is POLAR.
5. A NON-POLAR molecule has its valence electrons evenly distributed around the molecule.
6. A POLAR molecule has one of its sides with more or fewer electrons than the other sides.
Describe one action that people can take to reduce the amount of petroleum or crude oil needed by the plastics facility
Answer:
Use bags that are not of plastic and that we can reuse.
Explanation:
To reduce the number of petroleum, people should use everyday things that do not have plastic in their composition. For example, drink water from a flask made of iron, take your mug to the coffee store or use cloth bags. These elements are not disposable, and we can use them multiple times, which leads to a reduction in the consumption of plastic products and the amount of petroleum needed for their production.
A salt forms in the reaction of aluminum with chlorine. What is the most likely formula unit of this salt
Answer:
AlCl3
Explanation:
since the stable oxidation state of Aluminum is +3, and that of Chlorine is +1, then it will give such a formulae ✔️
What is the net ionic equation for the reaction shown below?
AgNO3(aq) + NaCl(aq) --> AgCl(s) + NaNO3(aq)
Answer:
Ag⁺(aq) + Cl⁻(aq) → AgCl(s)
Explanation:
Chemical equation:
AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq)
Balance chemical equation:
AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq)
Ionic equation
Ag⁺(aq)+ NO₃⁻(aq) + Na⁺(aq)+ Cl⁻(aq) → AgCl(s) + Na⁺(aq)+ NO₃⁻(aq)
Net ionic equation:
Ag⁺(aq) + Cl⁻(aq) → AgCl(s)
The NO₃⁻((aq) and Na⁺ (aq) are spectator ions that's why these are not written in net ionic equation. The AgCl can not be splitted into ions because it is present in solid form.
Spectator ions:
These ions are same in both side of chemical reaction. These ions are cancel out. Their presence can not effect the equilibrium of reaction that's why these ions are omitted in net ionic equation.
what is glycol .....
expalin with example
Answer:
glycol, any of a class of organic compounds belonging to the alcohol family; in the molecule of a glycol, two hydroxyl (―OH) groups are attached to different carbon atoms. The term is often applied to the simplest member of the class, ethylene glycol.
Explanation:
Answer:
Glycol, any of a class of organic compounds belonging to the alcohol family; in the molecule of a glycol, two hydroxyl (―OH) groups are attached to different carbon atoms. The term is often applied to the simplest member of the class, ethylene glycol.
In a laboratory, 30. J of heat was added to a gas piston assembly as the piston did 75 J of work on its surroundings. Calculate E for this system
Answer:
-40J
Explanation:
E= -w+q
E= -75J+30J
E= -40J
Special thanks to anyone who answers this...
Answer:
94.74 moles of NO₂ are produced.
Explanation:
Given data:
Volume of oxygen gas = 3714 L
Temperature = 273 K
Pressure = 1 atm
Moles of NO₂ produced = ?
Solution:
Chemical equation:
4NH₃ + 7O₂ → 4NO₂ + 6H₂O
Number of moles of oxygen:
At STP one mole of any gas occupy 22.4 L volume. Thus, 3714 L gas contain,
3714 L× 1 mol / 22.4 L
165.8 mol
now we will compare the moles of oxygen and nitrogen dioxide.
O₂ : NO₂
7 : 4
165.8 : 4/7×165.8 = 94.74 mol
Thus, 94.74 moles of NO₂ are produced.
C2H6O2 is infinitely miscible(soluble) in water. Ethylene glycol is a nonelectrolyte that is used as antifreeze. What is the lowest possible melting point for engine coolant that is 30% ethylene glycol? The Kf for H20 is 1.86 C/m.
Answer:
The lowest possible melting point for engine coolant is -12.8°C
Explanation:
This is about colligative property about freezing point depression.
We think the data 30% as a %m/m. It means that 30 g of ethylene glycol are contained in 100 g of solution. Therefore, we have 70 g of solvent.
Formula for freezing point depression is:
ΔT = Kf . m . i
Where ΔT = Freezing T° of pure solvent - Freezing T° of solution.
Freezing T° of solvent = 0° (We talk about water)
Let's determine m (molality, moles of solute in 1kg of solvent)
70 g = 0.070 kg
30 g . 1 mol / 62.07 g = 0.483 moles
0.483 mol / 0.070 kg = 6.90 m
We replace data in formula:
0° - Freezing T° of solution = 1.86 °C/m . 6.90m . 1
As ethylene glycol is a nonelectrolyte, i = 1
Freezing T° of solution = - 12.8°C
A 3.5 kg iron shovel is left outside through the winter. The shovel, now orange with rust, is rediscovered in the spring. Its mass is 3.7 kg. How much oxygen combined with the iron?
Fe + O2 ⟶FeO2⟶FeO2,As we can see our compound is FeO2FeO2 which is a simple combination with the same stoichiometry, so we will just do a subtract operation : 3.7 kg - 3.5 kg $= 0.2 \ \text{kg} \Rightarrow 0.2\color{#4257b2}{0} $ kgkg (respecting significant figures rule).
What does iron and oxygen together mean?Rust is the result of an iron and oxygen interaction together:It's an ionic since it is made up of the a metal and something that is not a metal.
Iron may rust even without water?Without water, rust cannot develop.Iron pipes frequently rust on the inside due to water vapor condensation on the metal.Moisture facilitates the electrolyte required for the reaction iron take place, which expedites the rusting process.
To know more about compound visit:
https://brainly.com/question/13516179
#SPJ1