The first plateau represents the boiling point of the pure solvent. This is explained in the below section.
Boiling point elevation refers back to the growth withinside the boiling factor of a solvent upon the addition of a solute. When a non-unstable solute is introduced to a solvent, the ensuing solution has a better boiling factor than that of the natural solvent. Boiling-factor elevation describes the phenomenon that the boiling factor of a liquid can be better whilst any other compound is introduced, which means that an answer has a better boiling factor than a natural solvent. This takes place every time a non-unstable solute, including a salt, is introduced to a natural solvent, including water.
To learn more about boiling point elevation check the link below:
https://brainly.com/question/23860390
#SPJ4
What is the common name for 2,3-dimethylbutane?
The common name for 2,3-dimethylbutane is diisopropyl.
In the IUPAC nomenclature system, the name 2,3-dimethylbutane indicates that there are two methyl groups (-CH₃) attached to the second and third carbon atoms of the butane chain.
However, in common naming, the two methyl groups are referred to as isopropyl groups, giving the compound the name diisopropyl. It is an organic compound with the chemical formula C₆H₁ and is an isomer of hexane.
It is important to note that there are other isomers of hexane with different common names, such as 2-methylpentane (isohexane) and 3-methylpentane (neo-hexane).
To know more about diisopropyl here:
https://brainly.com/question/24301056#
#SPJ11
A tank of compressed CO2 has a pressure of 851 psi and a volume of 0.150 L. What is the pressure in atmospheres, when the final volume is 2.84 L?
A tank of compressed CO2 has a pressure of 851 psi and a volume of 0.150 L. The pressure in atmospheres, when the final volume is 2.84 L is 44.94psi.
What is pressure ?The term pressure is defined as the force applied perpendicular to the surface of an object per unit area over which that force is distributed.
Gauge pressure is the pressure relative to the ambient pressure. Different units are used to express pressure.
Given:
P1 = 851
V1 = 0.150 L
P2 = ?
V2 = 2.84 L
P1V1 = P2V2
P2 = P1V1 / V2
= 851 × 0.150 / 2.84
P2 = 44.94
Thus, the pressure in atmospheres, when the final volume is 2.84 L is 44.94psi.
To learn more about the pressure, follow the link;
https://brainly.com/question/12971272
#SPJ9
A solution is prepared by dissolving 23. 7 g of cacl2 in 375 g of water. The density of the resulting solution is 1. 05 g/ml. The concentration of cl- in this solution is ________ m.
The concentration of chloride ions in the solution is 0.012 mM.
To determine the concentration of chloride ions (Cl-) in the solution, we need to first calculate the number of moles of calcium chloride (CaCl2) that were dissolved in the solution. We can use the formula weight of calcium chloride, which is 110.98 g/mol:
=> 23.7 g CaCl2 / 110.98 g/mol
=> 0.214 moles CaCl2
Next, we need to determine the number of moles of chloride ions produced when the calcium chloride dissolves. Since calcium chloride is an ionic compound, it dissociates into its constituent ions when dissolved in water. For every mole of calcium chloride that dissolves, one mole of calcium ions (Ca2+) and two moles of chloride ions (Cl-) are produced.
So, the number of moles of chloride ions produced is twice the number of moles of calcium chloride that were dissolved:
0.214 moles CaCl2 * 2 moles Cl- / 1 mole CaCl2
=> 0.428 moles Cl-
Finally, to determine the concentration of chloride ions in the solution, we need to divide the number of moles of chloride ions by the volume of the solution. The volume of the solution can be calculated from its mass and density:
=> 375 g solution / 1.05 g/mL
=> 358.33 mL
Now we can calculate the concentration of chloride ions in moles per milliliter (mM):
=> 0.428 moles Cl- / 358.33 mL
=> 0.012 mM Cl-
To learn more about Concentration :
https://brainly.com/question/13764840
#SPJ4
What is the frequency of light with a wavelength of 300nm?
The frequency of the light with a wavelength of the 300nm is 1 × 10¹⁵ Hz.
The wavelength of the light = 300 nm = 300 × 10⁻⁹ m
The frequency of the light can be calculated by the expression is as :
Frequency = speed of the light / wavelength
Where
The speed of the light = 3 × 10⁸ m/s
The wavelength of the light = 300 × 10⁻⁹ m
Frequency = speed of the light / wavelength
Frequency = 3 × 10⁸ m/s / 300 × 10⁻⁹ m
Frequency = 0.01 × 10¹⁷ Hz
Frequency = 1 × 10¹⁵ Hz
To learn more about wavelength here
https://brainly.com/question/13109209
#SPJ4
What is dinitrogen heptoxide formula?
The formula of the compound dinitrogen heptoxide is N₂O₅.
One of the binary nitrogen oxides is the substance Dinitrogen heptoxide.
A compound creates a new product by combining one or more additional ingredients. The mass ratio required to produce that product is equivalent to the combination of two substances or components. It is tightly connected, and they are equivalent in every manner to create a combination.
Dinitrogen heptoxide has the chemical formula N₂O₅.
This molecule has two nitrogen atoms and five oxygen atoms, as can be seen, and its name, Dinitrogen heptoxide, must reflect this
To know more about dinitrogen oxides, visit,
https://brainly.com/question/21479339
#SPJ4
a ground-state atom of which element has one electron in its fourth and outermost main energy level?a. Kb. Nac. Bd. Ga
A ground state atom of the element that has the one electron in its fourth and the outermost main energy level is the correct option is a. K.
The atomic number of the element potassium ,K is 19. The potassium atom has the 19 protons and the 19 electrons. There are 2 electrons on the potassium atom first energy level, the 8 electrons on the potassium atom second level, the 8 electrons on the potassium atom third energy level, and 1 on the potassium fourth energy level.
Thus, the fourth energy level of the element potassium has the only 1 electron.
To learn more about energy level here
https://brainly.com/question/19819922
#SPJ4
How many p-orbitals are occupied in a K atom?
The number of the p-orbitals are occupied in a K atom is six p orbitals.
Potassium belongs to an alkali metal with the atomic number is 19 and the atomic mass of 39. The potassium is placed in the first group and the fourth period. The electronic configuration of the potassium is as :
Electronic configuration of potassium = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹
The region or the space around the nucleus in which the probability of the finding of the electron is called as the orbitals. From the electronic configuration, it is clear that 2p and 3p sublevels are the entirely occupied because the each of them has the six electrons.
To learn more about orbital here
https://brainly.com/question/30835065
#SPJ4
What is the correct name for Dioxygen difluoride?
The correct name for the Dioxygen difluoride is the Fluorine dioxide. The chemical formula is O₂F₂.
The Fluorine dioxide is the compound of the fluorine and the oxygen with the molecular formula of the O₂F₂. It can exist as the orange colored solid which will melts into the red liquid at the temperature of the −163 °C.
The oxides of the fluorine is highly toxic by the inhalation. The Corrosive to the skin and the eyes. It Can also explode on the contact with the water. It will decomposes to the toxic gaseous fluorine if it will heated to the high temperature.
To learn more about fluorine here
https://brainly.com/question/1940697
#SPJ4
what chemical and its state of matter is in soda that makes it fizzy?
The chemical in soda that makes it fizzy is carbon dioxide (CO2), which is in a gaseous state. Under pressure, the CO2 dissolves into the soda when it is bottled or canned.
The CO2 escapes from the solution and generates bubbles as the can or bottle is opened and the pressure is released, giving the soda a fizzy flavor.
The quantity of fizziness and the rate at which the CO2 leaves the solution and generates bubbles can both be influenced by the amount of CO2 in the soda and the storage temperature.
Overall, soda's distinctive fizziness is a result of the gaseous CO2 in it.
To know more about carbon dioxide:
https://brainly.com/question/14445045
#SPJ4
Does like dissolve like in solubility?
"like dissolves like" in solubility because substances with similar intermolecular forces will dissolve in each other.
Yes, "like dissolves like" is a general rule in solubility. This means that substances with similar intermolecular forces will dissolve in each other. For example, polar substances will dissolve in polar solvents, and nonpolar substances will dissolve in nonpolar solvents.
Here is an example of how "like dissolves like" works in solubility:
1. Consider the polar substance table salt (NaCl) and the polar solvent water (H2O).
2. When table salt is added to water, the positive sodium ions (Na+) are attracted to the negative ends of the water molecules, and the negative chloride ions (Cl-) are attracted to the positive ends of the water molecules.
3. This attraction between the ions and the water molecules causes the salt to dissolve in the water.
In contrast, if a nonpolar substance like oil is added to water, it will not dissolve because the intermolecular forces between the oil and water molecules are not strong enough to overcome the forces holding the oil molecules together.
To learn more about solubility refer here:
https://brainly.com/question/28170449#
#SPJ11
What is the molar mass of lead and its atomic number?
The molar mass of lead, Pb atom is equals to 207.02 g/mol. The atomic number of lead in periodic table is 82.
A pure substance known as an element exists in discrete units known as atoms. It is known that an atom is composed of subatomic particles. The identity of an atom depends on the number of protons present in its nucleus. We know that molar mass is defined as the mass of substance in grams divided by moles of substance, that is grams per mole. In the case of atoms, the atomic mass with units is called the atomic mass unit We have lead, an atom of Pb. Now, scanning the periodic table, we find that Lead, labeled Pb, has an atomic number of 82. The atomic mass of lead is 207.2u or molar mass is 207.2 grams per mole.
For more information about periodic table, visit :
https://brainly.com/question/25916838
#SPJ4
when considering precise mass, which particle has the greatest mass?
When considering the precise mass, the particle has the greatest mass is the neutrons.
The Neutron is the heaviest among all the subatomic particles with the mass of the 1.0087 amu, and the proton has the mass of the 1.0073 amu. The Positron and the electron both have the mass of the 0.00055 amu.
The difference in between the mass of the neutron and the proton is very small. This is the reason that they are both have the relative mass of the one atomic mass unit. The mass of the neutron in the grams is the 1.674 × 10⁻²⁴ grams.
To learn more about mass here
https://brainly.com/question/28907859
#SPJ4
What material, when dry, tends to form the largest angle of repose?
Angular gravel when dry, tends to form the largest angle of repose.
A type of building material known as crushed stone or angular rock is created by mining a suitable rock deposit and using crushers to reduce the extracted rock to the required size.
The steepest angle of fall or dip in relation to the horizontal plane to which a granular material can be piled without collapsing is known as the angle of repose, or critical angle of repose. The material on the slope face is almost ready to slide at this angle. Angles of repose can be between 0° and 90°.
Learn more about angle of repose here brainly.com/question/23683999
#SPJ4
What is the first rule for predicting the products of chemical reaction?
The first rule for predicting the products of a chemical reaction is to identify the type of reaction that is taking place.
Chemical reactions can be broadly classified into five types: Combination or synthesis reaction: A combination reaction occurs when two or more reactants combine to form a single product. The general form of the combination reaction is A + B → AB.
Decomposition reaction: A decomposition reaction occurs when a single reactant breaks down into two or more products. The general form of the decomposition reaction is AB → A + B.
Single displacement or substitution reaction: A single displacement reaction occurs when an element displaces another element in a compound, and takes its place. The general form of a single displacement reaction is A + BC → AC + B.
Double displacement or metathesis reaction: A double displacement reaction occurs when two compounds exchange ions, and form two new compounds. The general form of a double displacement reaction is AB + CD → AD + CB.
Combustion reaction: A combustion reaction occurs when a substance reacts with oxygen, and produces heat and light. The general form of a combustion reaction is CxHyOz + O₂ → CO₂ + H₂O.
To know more about chemical reaction here
https://brainly.com/question/29762834
#SPJ4
Why Is Water the Universal Solvent?
Generally, water is known as the universal solvent as it dissolves more chemicals than any other known solvent.
Basically at the molecular level, salt basically dissolves in water due to electrical charges and due to the fact that both water and salt are the compounds which are polar, and with positive and negative charges on opposite sides in the molecule. This property of water allows the water molecule to become attracted to many other different types of molecules.
It is true that universal solvent does not exist. Water is basically known as the universal solvent because it dissolves more chemicals than any other solvent. However, water is the solvent that only dissolves with other polar molecules.
Learn more about universal solvent from the link given below.
https://brainly.com/question/1834245
#SPJ4
what experimental criterion is to be used to measure the rates of bromination of the hydrocarbons used in this experiment?
To measure the rates of bromination of the hydrocarbons used in experimental criterion is color change.
Bromination is a chemical reaction including the response of a compound, and bromine results in bromine added to the compound. The item framed after bromination will display new properties from the underlying reactant.
Bromination can happen in various ways, contingent upon the reactant.
An immersed compound goes through bromination by means of a free extreme instrument.An unsaturated hydrocarbon goes through bromination by means of an expansion response.A sweet-smelling compound goes through bromination by means of an electrophilic replacement instrument.A sweet-smelling compound goes through bromination by means of an electrophilic replacement instrument.The mechanism for bromination happens in three stages.
Initiation of bromine by Lewis acids.Attack of benzene.Deprotonation to produce benzene ring.To know more about bromination, visit here:
https://brainly.com/question/28938775
#SPJ4
Carbon has four electrons in its valence shell. What types of covalent bonds is it capable of forming?.
All the elements in the second row, carbon has the most outer shell electrons that can form covalent bonds (four).
Does carbon has four electrons capable of forming covalent bonds?Additionally, carbon possesses the most outer shell electrons (four) that can form covalent bonds of any second row element.
One electron from each of the atoms contributes to a pair of electrons that are shared in a single bond. Triple bonds share three pairs of electrons, while double bonds share two pairs. Multiple covalent bonds are bonds that share more than one pair of electrons.
Because it has four valence electrons, carbon may create four covalent bonds in order to reach the complete outer energy level. It creates compounds known as hydrocarbons when it solely bonds with hydrogen. Covalent bonds between carbon atoms can be single, double, or triple bonded.
To learn more about Covalent bonds refer to:
https://brainly.com/question/3447218
#SPJ4
You need 65.0 grams of copper for an experiment. How many atoms of copper is this?
You need 65.0 grams of copper for an experiment. There would be 6.16 x 10 ²³ atoms of copper
First we should calculate the moles of copper
Moles cooper = mass/ mass molar
Moles cooper = 65.0 grams / 63.5 g. mol
Moles cooper = 1. 023 moles
The number of atoms in 1 mole of any substance is 6.022 × 10²³ atoms. The Avogadro's number is a common name for this number (NA). It shows how many atoms and molecules make up a mole of a substance.
Quantities that cannot be measured in terms of grams or milligrams are also referred to as moles. A mole is hence the quantity of atoms, ions, or molecules.
The number of atom copper = moles x avogadro's number
The number of atom copper = 1. 023 moles x 6.022 × 10²³ = 6.16 x 10 ²³
Learn more about atoms and molecules here:
brainly.com/question/7013021
#SPJ4
what are the 4 parts of natural selection? please keep it short and simple
Answer:
Variation, Inheritance, Selection, Time and adaptation.
Explanation:
Variation : Some variation occur in the off spring in appearance and behavior.
Inheritance : These variation are consistently passed on from parent to offspring of next generation to become genetic trait of the species.
Selection : Differential survival and reproduction of these species.
Time and adaptation : These variations/ traits become common in the population. The result is a population that is better suited--better adapted--to some aspect of the environment than it was before.
Example : Legs once used for walking are modified for use as wings or flippers. Scales used for protection change colors to serve as camouflage.
Hope it helps..
which patient would benefit from ecg monitoring due to an electrolyte imbalance?
a. Hypokalemia
b. Hypocalcemia
c. Hypomagnesemia
Answer:
Patients with electrolyte imbalances, including hypokalemia, hypocalcemia, and hypomagnesemia, can potentially benefit from ECG monitoring. However, hypokalemia is the most common electrolyte imbalance associated with ECG changes and is considered the most important electrolyte abnormality to monitor with ECG.
Hypokalemia, which is a low level of potassium in the blood, can lead to ECG changes such as ST-segment depression, T-wave flattening or inversion, and the appearance of U-waves. These changes may be difficult to detect without ECG monitoring, but they can be life-threatening, as they can lead to cardiac arrhythmias.
While hypocalcemia and hypomagnesemia can also cause ECG changes, they are generally less likely to result in arrhythmias than hypokalemia. ECG monitoring may still be recommended for patients with hypocalcemia or hypomagnesemia if they have symptoms or other risk factors for arrhythmias. However, hypokalemia is the electrolyte imbalance that most commonly requires ECG monitoring due to the risk of arrhythmias.
For more questions on ECG -
brainly.com/question/7172728
#SPJ4
Chemistry help needed !!
At the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.
What is pentane?Pentane is an organic compound with the formula C₅H₁₂ - that is, an alkane with five carbon atoms.
Given is to understand why the temperature increase at the of the experiment.
At the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.
Therefore, at the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.
To solve more questions on electrostatic energy scaling, visit the link-
brainly.com/question/29014197
#SPJ1
Is carbon dioxide a pure substance True or false?
The given statement, "Carbon dioxide is not a pure substance" is false because it is a compound made up of two different elements, carbon and oxygen.
A pure substance is a material that consists of only one type of atom, molecule, or ion. Carbon dioxide is a chemical compound that contains one carbon atom and two oxygen atoms. Therefore, it is not a pure substance because it is made up of multiple types of atoms.
However, CO₂ can exist in pure form as a gas, liquid, or solid under certain conditions of temperature and pressure. This distinction is important in many areas of science and engineering, such as thermodynamics, materials science, and environmental science, where the properties of substances and their interactions are studied and applied.
To know more about the carbon dioxide, here
brainly.com/question/3049557
#SPJ4
what is the relationship between the following two molecules?
OH OH Not yet answered Marked out of 1.00 Hw Cl H3C CH3 Flag a. Constitutional isomers b. Conformational isomers c. Diasteriomers d. Enantiomers None of these
The two molecules shown are constitutional isomers, as they have the same molecular formula (C3H7Cl) but different structural arrangements of the atoms.
Constitutional isomers differ from conformational isomers, diastereomers, and enantiomers in that they have different arrangements of atoms in their structures.
Conformational isomers have the same arrangement of atoms, but differ in the 3D shape of the molecule; diastereomers have different chiral centers and hence different configurations; and enantiomers are mirror images of each other.
Learn more about molecules :
https://brainly.com/question/475709
#SPJ4
During photosynthesis, _____ is reduced to _____.a. carbon dioxide; oxygenb. sugar; oxygenc. oxygen; waterd. carbon dioxide; sugare. water; carbon dioxide
Carbon dioxide is decreased and water is oxidized during photosynthesis.
What is meant by photosynthesis?Accordingly, oxygen loses electrons while carbon dioxide acquires them. Because light energy converts these electrons to carbon dioxide throughout this process, the water ([tex]$$H_2O[/tex]) received by plant roots loses electrons.
By transferring electrons, carbon dioxide is converted into carbohydrates like glucose. When water is oxidized, oxygen is also created as a byproduct.
One of the most vital processes that support life in living things is photosynthesis. Green plants utilise solar energy in this method to convert it into chemical energy.
As a result, in the process, oxygen and carbohydrates are produced from carbon dioxide and water. Most of the oxygen in the atmosphere comes from this process, which also powers the food web's foundation.
Therefore, the correct answer is option e. water; carbon dioxide.
The complete question is:
During photosynthesis, _____ is reduced to _____.
a. carbon dioxide; oxygen
b. sugar; oxygen
c. oxygen; water
d. carbon dioxide; sugar
e. water; carbon dioxide
To learn more about photosynthesis refer to:
https://brainly.com/question/19160081
#SPJ4
The temperature of water at the bottom of the deep ocean near the equator is likely to be closest to
12 Celsius
19 Celsius
50 Celsius
2 Celsius
Answer:
Four folk love legends: "Cowhand and Weaver Girl", "Meng Jiangnu crying at the Great Wall" (cry Wan Xiliang), "Liang Shanbo and Zhu Yingtai", "The Legend of the White Snake", the author does not know
The development history of the Four ancient Chinese folk legends: China is a country with a vast territory and abundant resources and a long history, which contains extremely rich national cultural heritage. Among them, the four most Chinese ones are the famous "Cowhand and Weaver Girl", "Meng Jiangnu", "Liang Shanbo and Zhu Yingtai" and "The Legend of the White Snake". The most widespread, the most influential.
Brief introduction: the gigolo knit legend began in the book of songs, cable ":" Qi he vega ", "Huan he cow". "Nineteen Ancient Poems · Long Distance Star" has called the cowherd and weaver girl husband and wife. Ying Shao "custom" Yi wen: "Zhinv Tanabata when crossing the river, make magpie bridge, legend has it that the magpie head without reason all Kun, because beam (note: bridge) to cross Zhinv also. The story has been preliminarily formed and combined with the Qixi Festival custom.
The legend of Meng Jiangnu originated from the record of Qi Liang's wife refusing to hang herself in the area of the Marquis of Qi and adhering to the rules of etiquette in the Zhuan. Later, it was added in the Dangong that "Duke Zhuang of Qi attacked Ju and took away (tunnel) and Qi Liang died. The weeping wife who greeted his coffin on the road is the archetype of the story. Han Liu Xiang's Biography of Liannu (IV) : "Qi Liangzhu died in battle, his wife cried in the city, ten days the city collapsed." And Tang (anonymous) "carved jade collection" record "Qin when Yan Qi Liang, married Meng Chao female Zhongzi wife, because good was built the Great Wall officials killed, Zhongzi cry under the Great Wall, the city collapsed. It is known that this legend was popular in the Tang Dynasty, but Meng Zhongzi and Qiliang were renamed Meng Jiangnv and Fan Xiliang in the legend. The story of Butterfly lovers first appeared in Tang's "Ten Taoist and Four Tibetan Records", which recorded the story of Liang and Zhu "having a taste of schoolmates" and "sharing the tomb". There are more detailed records in Xuanbaozhi of late Tang Zhang Reading. To the Ming Dynasty Feng Menglong's "Ancient and modern novels", and added to the British Taiwan confused belt, Liang Shanbo doubts and butterflies.
The story of White Snake came into being the latest. The origin of the story is as follows. It originates from the Three Towers of West Lake. To the Ming Dynasty Feng Menglong's "Lady White Forever Town Leifeng Pagoda" (" Warning Word "), the story has been preliminarily finalized.
What causes one object to change the motion of another object?
Answer:
The speed and direction of motion can be changed by applying force on an object and thus a force can bring a change in the state of motion of an object.
You have 500. Ml of a solution containing 0. 20 m acetic acid (ch3cooh) and 0. 30 m sodium acetate (ch3coona). What will be the ph of the solution that results after the addition of 20. 0 ml of 1. 00 m naoh(aq)?.
The pH of the solution after adding 20.0 mL of 1.00 M NaOH will be 9.24.
The pH of a solution containing a weak acid and its salt will be affected by the addition of a strong base, such as NaOH. The initial solution contains acetic acid, a weak acid, and sodium acetate, its conjugate base.
To simplify the answer:
The addition of 20.0 mL of 1.00 M NaOH to a solution containing acetic acid and its conjugate base will result in a decrease in pH.The pH of the solution after the addition of NaOH will be 9.24.The addition of NaOH will consume some of the acetate ions, converting them back into acetic acid and increasing the concentration of hydrogen ions in the solution. This will result in a decrease in pH. To calculate the pH after the addition of NaOH, we can use the concept of an acid-base buffer.
Learn more about Acetic acid:
https://brainly.com/question/15231908
#SPJ4
Which shows the correct Lewis
structure of AsH?
The Lewis structure is shown by option A
What is the Lewis structure?The Lewis structure, also known as a Lewis dot diagram, is a type of structural formula that represents the valence electrons of an atom in a molecule. It is named after Gilbert N. Lewis, who developed the concept in 1916.
In a Lewis structure, the symbol of an element represents the nucleus and inner electrons of the atom, while dots or crosses surrounding the symbol represent the valence electrons. The valence electrons are the electrons in the outermost shell of an atom that participate in chemical reactions. By drawing Lewis structures, one can determine the number of bonds that an atom can form, and predict the molecular geometry of a molecule.
We can see that arsenic is in group 15 hence it would have one lone pair and three bo0nd pairs as shown
Learn more about Lewis structure:https://brainly.com/question/20300458
#SPJ1
Answer:A
Explanation: Got it right
What Compound is Cs?
The name of the compound CS is the Carbon monosulfide.
Carbon monosulfide is the chemical compound with the formula of CS. This molecule is resembles with the carbon monoxide with the triple bond between the carbon and the sulfur. The molecule is not the intrinsically unstable, but it will tends to the polymerize. The carbon belong to the group 14 in the periodic table. The carbon is the non metal element. The sulfur also the non metal element in the periodic table.
The carbon monosulfide is unstable as the solid or the liquid, but it is observed as the gas both in the laboratory or in the interstellar medium.
To learn more about periodic table here
https://brainly.com/question/11155928
#SPJ4
This question is incomplete, the complete question is :
What is the name of the compound CS ?
Which group has the lowest ionization energy value?
Answer: The alkali metals.
Explanation: