When the rate of disappearance of O₂ is 0.18 Ms, the rate of appearance of CO₂ is 0.12 M/s
So, the correct answer is A
The combustion of ethylene can be represented by the reaction:
C₂H₄(g) + 3 O₂(g) -> 2 CO₂(g) + 2 H₂O(g)
In this reaction, the rate of disappearance of O₂ is given as 0.18 M/s.
To find the rate of appearance of CO₂, we can use the stoichiometry of the reaction. For every 3 moles of O₂ consumed, 2 moles of CO₂ are produced.
So, we can set up a proportion:
(2 moles of CO₂) / (3 moles of O₂) = (rate of appearance of CO₂) / (0.18 M/s).
Solving for the rate of appearance of CO₂, we get:
(2/3) * 0.18 M/s ≈ 0.12 M/s.
Therefore, the correct answer is A. 0.12 M/s.
Learn more about ethylene at https://brainly.com/question/31323850
#SPJ11
how many of the following molecules are nonpolar: cf4, sf4, xef4, pf5, if5? 4 3 2 0 1
Based on the analysis, the number of nonpolar molecules is 4 (CF4, XeF4, PF5, and IF5), while the number of polar molecules is 1 (SF4).
How many of the following molecules (CF4, SF4, XeF4, PF5, IF5) are nonpolar?To determine the polarity of molecules, we need to consider the molecular geometry and the presence of polar bonds. A molecule is nonpolar if the individual bond polarities cancel out each other due to symmetrical arrangement or if there are no polar bonds present.
Let's analyze each molecule:
CF4 (carbon tetrafluoride):
Carbon (C) is the central atom bonded to four fluorine (F) atoms.The C-F bonds are polar, with the fluorine atoms being more electronegative. However, the molecule has a tetrahedral geometry with symmetrical arrangement, resulting in the cancellation of bond polarities.Therefore, CF4 is a nonpolar molecule.SF4 (sulfur tetrafluoride):
Sulfur (S) is the central atom bonded to four fluorine (F) atoms.The S-F bonds are polar, with the fluorine atoms being more electronegative.The molecule has a trigonal bipyramidal geometry with an axial and equatorial arrangement.The axial and equatorial positions are not symmetrical, resulting in an overall molecular dipole moment.Therefore, SF4 is a polar molecule.XeF4 (xenon tetrafluoride):
Xenon (Xe) is the central atom bonded to four fluorine (F) atoms.The Xe-F bonds are polar, with the fluorine atoms being more electronegative.The molecule has a square planar geometry with symmetrical arrangement, resulting in the cancellation of bond polarities.Therefore, XeF4 is a nonpolar molecule.PF5 (phosphorus pentafluoride):
Phosphorus (P) is the central atom bonded to five fluorine (F) atoms.The P-F bonds are polar, with the fluorine atoms being more electronegative.The molecule has a trigonal bipyramidal geometry with an axial and equatorial arrangement.The axial and equatorial positions are not symmetrical, resulting in an overall molecular dipole moment.Therefore, PF5 is a polar molecule.IF5 (iodine pentafluoride):
Iodine (I) is the central atom bonded to five fluorine (F) atoms.The I-F bonds are polar, with the fluorine atoms being more electronegative.The molecule has a square pyramidal geometry with an axial and equatorial arrangement.The axial and equatorial positions are not symmetrical, resulting in an overall molecular dipole moment.Therefore, IF5 is a polar molecule.Learn more about nonpolar molecules
brainly.com/question/28300881
#SPJ11
A 0. 60 mol sample of PCl 3 (g) and a 0. 70 mol sample of Cl 2 (g) are placed in a previously evacuated 1. 0 L container, and the reaction represented above takes place. At equilibrium, the concentration of PCl 5 (g) the container is 0. 040 M. (a) Find the concentrations of PCl 3 and Cl 2 at the equilibrium
At equilibrium, the concentrations of PCl3 and Cl2 in the 1.0 L container are 0.40 M and 0.30 M, respectively.
To find the concentrations of PCl3 and Cl2 at equilibrium, we need to consider the stoichiometry of the reaction and use the given equilibrium concentration of PCl5.
From the balanced equation for the reaction:
PCl3 + Cl2 ⇌ PCl5
We can determine that one mole of PCl3 reacts with one mole of Cl2 to form one mole of PCl5.
Let's assume x represents the change in concentration for both PCl3 and Cl2.
At equilibrium, the concentration of PCl3 is given as 0.40 M. Since one mole of PCl3 reacts to form one mole of PCl5, the concentration of PCl5 at equilibrium is also 0.40 M.
Using the stoichiometry of the reaction, the change in concentration for Cl2 is also x.
The equilibrium concentration of Cl2 can be calculated by subtracting the change in concentration from the initial concentration:
[Cl2]equilibrium = [Cl2]initial - x = 0.70 M - x
From the given information, we know that the concentration of PCl5 at equilibrium is 0.040 M.
Using the stoichiometry of the reaction, the change in concentration for PCl3 is also x.
The equilibrium concentration of PCl3 can be calculated by subtracting the change in concentration from the initial concentration:
[PCl3]equilibrium = [PCl3]initial - x = 0.60 M - x
Since the stoichiometry of the reaction is 1:1 for PCl3 and Cl2, the concentration of PCl5 can be used to determine the value of x.
From the balanced equation, the initial concentration of PCl5 is zero, and at equilibrium, it is given as 0.040 M. This indicates that x has a value of 0.040 M.
Substituting the value of x in the expressions for [PCl3]equilibrium and [Cl2]equilibrium:
[PCl3]equilibrium = 0.60 M - 0.040 M = 0.56 M
[Cl2]equilibrium = 0.70 M - 0.040 M = 0.66 M
Therefore, at equilibrium, the concentrations of PCl3 and Cl2 in the 1.0 L container are 0.40 M and 0.30 M, respectively.
To learn more about balanced equation click here : brainly.com/question/31242898
#SPJ11
At equilibrium in a 10 L vessel, there are 7.60x 10-2 moles of SO2, 8.60x102 moles of O2, and 8.20x102 moles of SO3. What is the equilibrium constant Ke under these conditions? 2SO,(g)+ 0,(g) 2SO, (g) (A) 12.5 (B) 13.5 (C) 125 (D) 135
Finally, Ke = 1358. Therefore, none of the provided options (A, B, C, or D) is the correct answer. The equilibrium constant Ke under these conditions is approximately 1358 in pressure.
The force that a substance applies to its surroundings as a function of area is known as pressure. It is a fundamental physical characteristic that is important to many branches of science, including as physics, chemistry, and engineering. The interaction of molecules or particles with a container's or surface's walls results in pressure. Units like pascals (Pa), atmospheres (atm), millimetres of mercury (mmHg), or pounds per square inch (psi) are frequently used to measure it. The behaviour and characteristics of gases, liquids, and solids are influenced by pressure, which also has an impact on processes including fluid flow, gas compression, chemical reactions, and atmospheric conditions. In many real-world scenarios, from industrial operations to medical equipment, understanding and managing pressure is crucial.
To calculate the equilibrium constant (Ke) for the given reaction:
2SO2(g) + O2(g) ⇌ 2SO3(g)
First, we need to find the equilibrium concentrations of each species by dividing the moles by the volume of the vessel (10 L):
[SO2] = [tex](7.60 x 10^(-2) moles) / 10 L = 7.60 * 10^(-3) M[/tex]
[O2] = [tex](8.60 * 10^2 moles) / 10 L = 8.60 * 10^1 M[/tex]
[SO3] = [tex](8.20 * 10^2 moles) / 10 L = 8.20 * 10^1 M[/tex]
Now, we can plug these concentrations into the equilibrium constant expression for the given reaction:
Ke =[tex][SO3]^2 / ([SO2]^2 * [O2])[/tex]
Note that the coefficients in the balanced equation become the powers in the equilibrium constant expression.
Ke = [tex](8.20 * 10^1)^2 / ((7.60 * 10^(-3))^2 * (8.60 * 10^1))[/tex]
Next, calculate the values:
Ke = (6724) / (5.76 x[tex]10^(-3)[/tex] 10^(-5) * 86)
Ke = 6724 / (4.95 x [tex]10^(-3)[/tex])
Finally, Ke ≈ 1358. Therefore, none of the provided options (A, B, C, or D) is the correct answer. The equilibrium constant Ke under these conditions is approximately 1358.
Learn more about pressure here:
https://brainly.com/question/29241728
#SPJ11
²³⁵u undergoes fission by one neutron to produce ¹³³sb, three neutrons, and what other nuclide?
Nuclear reactions are those in which the identity or properties of an atomic nucleus are altered as a result of being bombarded with energetic particles. Here the nuclide produced is ¹⁰⁰Nb. The correct option is B.
Nuclear fission is the process by which an atom's nucleus breaks into two lighter nuclei during a nuclear reaction. This decay can occur naturally through spontaneous radioactive decay, or it can be artificially recreated in a lab setting by creating the right conditions (such as neutrino bombardment).
Here initially ²³⁵U undergoes fission as follows:
²³⁵U + ₀¹n → ²³⁶U
The atomic number of ²³⁶U is 92 and its mass is 236. One of the products formed here is ¹³³sb which has a mass of 133 and atomic number 51. 3 neutrons are also produced whose mass is 1 and atomic number is 0.
The atomic mass of the new product is:
236 -133 - 3 × 1 = 100
The atomic number of the new product is:
92 - 51 - 3 × 0 = 41
The new nuclide is ₄₁Nb¹⁰⁰.
The fission reaction is:
₉₂U²³⁵ + ₀¹n → ₅₁Sb¹³³+ ₄₁Nb¹⁰⁰ + 3₀¹n
Thus the correct option is B.
To know more about fission, visit;
https://brainly.com/question/10203508
#SPJ12
Your question is incomplete, but most probably your full question was,
²³⁵u undergoes fission by one neutron to produce ¹³³sb, three neutrons, and what other nuclide?
A. ¹⁰⁰Zr
B. ¹⁰⁰Nb
C. ¹⁰¹Nb
D. ¹⁰⁰Mo
E. ¹⁰²Mo
in which step of the four-stroke engine cycle does the car release CO2, H20, and CO?
A. air and fuel intake
B. compression and ignition
C. combustion and expansion
D. exhaust
correct answer is D. on apex
Answer:
d is the answer
Explanation:
well you did put the answer but not XPLANATION so why not:
the four-stroke engine cycle does the car release any of :
CO2 & H2O
So d is correct
D being the answer
select all the statements that correctly describe the equilibrium constant kc for a general chemical change represented by the equation given below. aa (aq) bb (aq) ⇌ cc (aq) dd (aq)
The equilibrium constant (Kc) is a measure of the ratio of the concentrations of products to reactants at equilibrium for a given chemical reaction.
For the general chemical change represented by the equation aa (aq) bb (aq) ⇌ cc (aq) dd (aq), the equilibrium constant (Kc) can be defined as:
Kc = [C]^c[D]^d / [A]^a[B]^b
where [A], [B], [C], and [D] are the concentrations of reactants and products in mol/L at equilibrium and a, b, c, and d are the stoichiometric coefficients of the reactants and products in the balanced equation.
The following statements correctly describe the equilibrium constant Kc for the given chemical change:
1. Kc is constant for a given reaction at a specific temperature.
2. Kc is equal to the ratio of the concentrations of products to reactants at equilibrium.
3. Kc can be used to predict the direction in which the reaction will proceed towards equilibrium.
4. Kc can be used to calculate the equilibrium concentrations of reactants and products.
In summary, the equilibrium constant Kc is a fundamental concept in chemistry that describes the balance between forward and reverse reactions in a chemical system. It is a useful tool for predicting the direction and extent of chemical changes and for determining the equilibrium concentrations of reactants and products.
To learn more about chemical changes:
https://brainly.com/question/29762834
#SPJ11
What is the ph of a solution containing .12mol/l nh4cl and .03mol/l naoh?
To determine the pH of the solution, we first need to calculate the concentration of the resulting solution after the reaction between NH4Cl and NaOH.
The balanced chemical equation for the reaction is:
NH4Cl + NaOH → NaCl + NH3 + H2O
From the equation, we can see that NH4Cl reacts with NaOH to form NaCl, NH3, and H2O.
The NH3 produced will react with water to form NH4+ and OH- ions. Therefore, the resulting solution will contain NH4+, Cl-, Na+, and OH- ions.
To calculate the concentration of NH4+ and OH- ions, we need to use the following equations:
[tex]NH4Cl → NH4+ + Cl-[/tex]
[tex]NaOH → Na+ + OH-[/tex]
The NH4+ and OH- ions will react according to the following equation:
[tex]NH4+ + OH- → NH3 + H2O[/tex]
We can use the initial concentrations of NH4Cl and NaOH to calculate the concentration of NH4+ and OH- ions in the resulting solution:
[ NH4+ ] = 0.12 mol/L
[ OH- ] = 0.03 mol/L
To calculate the pH, we need to determine the concentration of H+ ions in the solution. Since NH4+ is a weak acid, it will undergo partial dissociation according to the following equation:
[tex]NH4+ + H2O ↔ NH3 + H3O+[/tex]
The equilibrium constant expression for this reaction is:
Ka = [ NH3 ][ H3O+ ] / [ NH4+ ]
Since NH4+ is the limiting reactant, we can assume that all of the NH4+ ions will react to form NH3 and H3O+ ions. Therefore, the concentration of NH3 and H3O+ ions will be equal to [ NH4+ ].
[ NH3 ] = [ NH4+ ] = 0.12 mol/L
Substituting the values into the equilibrium constant expression and solving for [ H3O+ ], we get:
[tex]Ka = 5.6 × 10^-10[/tex]
[tex][ H3O+ ] = sqrt( Ka × [ NH4+ ] ) = 1.34 × 10^-6 mol/L[/tex]
pH = -log [ H3O+ ] = -log ( 1.34 × 10^-6 ) = 5.87
Therefore, the pH of the solution is 5.87.
To know more about pH of the solution refer here
https://brainly.com/question/15163821#
#SPJ11
If 7.40 g of O3 reacts with 0.670 g of NO, how many grams of NO3 will be produced? Identify the limiting reagent from the reaction.
2O3 + 3NO → 3NO3
O3 produces _____0.72____ grams of NO2
NO produces ________ grams of NO2
The limiting reagent (reactant) is-
The grams of NO3 produced in the reaction will be 0.72 g. The limiting reagent is NO.
First, we need to calculate the moles of O3 and NO using their molar masses. The molar mass of O3 is approximately 48 g/mol, and the molar mass of NO is approximately 30 g/mol.
The moles of O3 can be calculated by dividing the given mass of O3 (7.40 g) by its molar mass, which gives approximately 0.154 moles.
Similarly, the moles of NO can be calculated by dividing the given mass of NO (0.670 g) by its molar mass, which gives approximately 0.0223 moles.
Next, we can use the stoichiometric coefficients from the balanced equation to determine the moles of NO3 that can be produced from each reactant. According to the balanced equation, 2 moles of O3 react with 3 moles of NO to produce 3 moles of NO3.
From the calculated moles, we find that O3 can produce approximately 0.231 moles of NO3 (0.154 moles O3 × 3 moles NO3 / 2 moles O3).
On the other hand, NO can produce approximately 0.0335 moles of NO3 (0.0223 moles NO × 3 moles NO3 / 3 moles NO).
To convert the moles of NO3 to grams, we multiply by the molar mass of NO3, which is approximately 62 g/mol.
Thus, O3 produces approximately 0.72 grams of NO3 (0.231 moles NO3 × 62 g/mol).
Since NO produces a lesser amount of NO3 (0.0335 moles NO3 or approximately 2.08 grams), it is the limiting reagent in this reaction. The amount of NO3 produced is determined by the amount of NO available, and any excess O3 is left unreacted.
To learn more about molar mass click here : brainly.com/question/31545539
#SPJ11
how many electrons, protons, and neutrons are in a neutral 197au197au atom? enter your answers numerically separated by commas.
The number of electrons, protons, and neutrons in a neutral 197Au atom is 79 electrons, 79 protons, and 118 neutrons.
How many electrons, protons, and neutrons are present in a neutral 197Au atom?A neutral atom contains the same number of electrons as protons. The atomic number of gold (Au) is 79, which corresponds to the number of protons. To determine the number of neutrons, we subtract the atomic number from the atomic mass. In the case of gold-197 (197Au), the atomic mass is 197, and subtracting the atomic number (79) gives us the number of neutrons.
Hence, a neutral 197Au atom contains 79 electrons, 79 protons, and 118 neutrons.
Understanding the composition of atoms and the distribution of subatomic particles is fundamental to the study of atomic structure and the properties of elements.
Learn more about neutral atom
brainly.com/question/29235711
#SPJ11
list two groups ( two or more members) of these diatomic molecules with the same number of electrons
Two groups of diatomic molecules with the same number of electrons are nitrogen (N2) and oxygen (O2), and chlorine (Cl2) and fluorine (F2).
Diatomic molecules are molecules that consist of two atoms of the same element. Nitrogen, oxygen, chlorine, and fluorine are all diatomic molecules, meaning they have two atoms in their structure. Nitrogen and oxygen each have 14 electrons in their outermost electron shell, while chlorine and fluorine each have 14 electrons in their outermost electron shell as well. Therefore, nitrogen and oxygen have the same number of electrons, and chlorine and fluorine have the same number of electrons.
Group 2: Both N2 and O2 molecules have a total of 14 electrons each. N2 has 5 electrons per nitrogen atom, and 2 shared electrons in the triple covalent bond, making a total of 14 electrons for the entire molecule. O2 has 6 electrons per oxygen atom and 2 shared electrons in the double covalent bond, also resulting in a total of 14 electrons for the entire molecule.
To know more about molecules visit :
https://brainly.com/question/19556990
#SPJ11
when considering the relationship among standard free energy change, equilibrium constants, and standard cell potential, the equation δg∘=−nfe∘cell is _______.
The equation δG° = -nFE°cell relates the standard free energy change (ΔG°), the number of moles of electrons transferred (n), and the standard cell potential (E°cell) of a redox reaction.
This equation is derived from the relationship between Gibbs free energy and the work done by a cell in a reversible process.
The equation shows that the standard free energy change is directly proportional to the number of moles of electrons transferred and the standard cell potential.
The negative sign indicates that the reaction is spontaneous when ΔG° is negative.
This equation is useful in predicting the feasibility of a redox reaction and can be used to calculate the equilibrium constant for the reaction using the relationship ΔG° = -RT ln K.
To know more about redox reaction, refer here:
https://brainly.com/question/13293425#
#SPJ11
at 25°c, 35.66 mg of silver phosphate dissolves in 2.00l water to form a saturated solution. calculate the ksp of ag3po4 (s). the molar mass of ag3po4 = 418.6 g/mol.
The Ksp of silver phosphate (Ag₃PO₄) is 1.8 × 10^-18.
To calculate the Ksp of Ag₃PO₄ , first convert the mass of silver phosphate to moles:
moles of Ag₃PO₄ = 35.66 mg / 418.6 g/mol = 8.52 × 10^-5 mol
Next, calculate the molar solubility of Ag3PO4 in the solution:
molar solubility = moles of Ag₃PO₄ / volume of solution
molar solubility = 8.52 × 10⁻⁵ mol / 2.00 L = 4.26 × 10⁻⁵ M
Finally, use the molar solubility to calculate the Ksp using the expression:
Ag₃PO₄ (s) ⇌ 3 Ag+(aq) + PO₄(aq)
Ksp = [Ag+]^3[PO₄₃-]
Substitute the equilibrium concentrations:
Ksp = (3 × 4.26 × 10⁻⁵ M)³ (4.26 × 10⁻⁵ M)
Ksp = 1.8 × 10⁻18
Therefore, the Ksp of Ag₃PO₄ is 1.8 × 10⁻¹⁸
To learn more about equilibrium concentrations
https://brainly.com/question/16645766
#SPJ4
if the aka of a monoprotic weak acid is 4.1×10−6,4.1×10−6, what is the phph of a 0.17 m0.17 m solution of this acid?
The pH of a 0.17 M solution of this weak acid is approximately 2.99, To determine the pH of a 0.17 M solution of a monoprotic weak acid, we can use the acid dissociation constant (Ka) and the equilibrium expression: Ka = [H+][A-] / [HA].
where [H+] is the concentration of hydrogen ions, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.
Assuming that the acid dissociates to a negligible extent, we can make the approximation [HA] ≈ initial concentration of the acid, and [A-] ≈ 0. Then, the equilibrium expression becomes:
Ka = [H+]² / [HA]
Solving for [H+], we get:
[H+] = sqrt(Ka x [HA])
[H+] = sqrt(4.1 x 10⁻⁶ x 0.17)
[H+] = 1.01 x 10⁻³ M
To find the pH, we can use the equation:
pH = -log[H+]
pH = -log(1.01 x 10⁻³)
pH = 2.99
To know more about pH refer here :-
https://brainly.com/question/2288405#
#SPJ11
use the y-intercept from the best fit line to determine an experimental value for the radius of curvature r of your mirror:
To determine an experimental value for the radius of curvature r of a mirror using the y-intercept from the best fit line, one can use the equation y = mx + b, where b is the y-intercept and r = 2b.
The y-intercept of a best fit line represents the point where the line intersects the y-axis. In the context of a mirror, this point represents the distance between the center of curvature and the mirror's vertex. Therefore, if we know the y-intercept of the best fit line, we can use it to determine the radius of curvature.
To do this, we can use the formula for the equation of a straight line, y = mx + b, where m is the slope of the line and b is the y-intercept. Since the y-intercept represents half the distance between the mirror and the center of curvature, we can calculate the radius of curvature by multiplying the y-intercept by 2, i.e., r = 2b.
For more questions like Distance click the link below:
https://brainly.com/question/15172156
#SPJ11
are the massive reef limestones of section 3 the same age as the massive reef limestones of section 7, and why?
The age of the reef limestones in different locations can be determined using radiometric dating techniques, such as uranium-lead dating or carbon dating.
If the ages of the reef limestones in section 3 and section 7 are found to be similar, then it is likely that they are of the same age. However, there could be local variations in the age of the reef limestones due to differences in geological history or environmental factors.
Radiometric dating is a method used to determine the age of rocks or fossils by measuring the decay of radioactive isotopes within them. The rate of decay is constant, allowing scientists to calculate the age of the sample by measuring the ratio of isotopes present.
Therefore, a detailed geological analysis of the two sections would be needed to determine the age relationship between the massive reef limestones of section 3 and section 7.
To learn more about radiometric dating refer here:
https://brainly.com/question/14799339#
#SPJ11
Calculate each of the following quantities: Molarity of a solution prepared by diluting 37.00 mL of 0.250 M potassium chloride to 150.00 mL Molarity of a solution prepared by diluting 25.71 mL of 0.0706 M ammonium sulfate to 500.00 mL Molarity of sodium ion is a solution made by mixing 3.58 mL of 0.348 M sodium chloride with 500. mL of 6.81 times 10^-2 M sodium sulfate (assume volumes are additive)
In each case, the molarity is calculated by dividing the number of moles of solute by the liters of solution. The resulting value represents the concentration of the solute in the solution in molarity.
a. Molarity of a solution prepared by diluting 37.00 mL of 0.250 M potassium chloride to 150.00 mL:
Molarity = (moles of solute/liters of solution)
Molarity = (0.250 moles of KCl/150 mL)
Molarity = 0.0167 molar
b. Molarity of a solution prepared by diluting 25.71 mL of 0.0706 M ammonium sulfate to 500.00 mL:
Molarity = (moles of solute/liters of solution)
Molarity = (0.0706 moles of [tex]NH_4SO_4[/tex] / 500 mL)
Molarity = 0.0014 molar
c. Molarity of sodium ion is a solution made by mixing 3.58 mL of 0.348 M sodium chloride with 500. mL of 6.81 times 10^-2 M sodium sulfate (assume volumes are additive):
Molarity of Na+ ions = (moles of solute/liters of solution)
Molarity of Na+ ions = (0.348 moles of NaCl/500 mL)
Molarity of Na+ ions = 0.0007 molar
Learn more about molarity visit: brainly.com/question/30404105
#SPJ4
Explain how delta T would be affected if a greater amount of surrounding solvent (water) is used, assuming the mass of salt remains constant? b. Explain how q_reaction would be affected if a greater amount of surrounding solvent (water) is used? Explain. If the following enthalpies are known: A + 2B rightarrow 2C + D delta H = -95 kJ B + X rightarrow C delta H = +50kJ What is delta H for the following reaction? A rightarrow 2X + D
ΔH for the reaction A → 2X + D is +5 kJ.
a. If a greater amount of surrounding solvent (water) is used, the delta T will decrease.
This is because the specific heat capacity of water is much higher than the solute, so a greater amount of water will absorb more heat for a given temperature change, resulting in a smaller delta T.
b. The amount of surrounding solvent (water) used does not affect [tex]q_{reaction[/tex]. This is because [tex]q_{reaction[/tex] is a function of the amount of heat released or absorbed by the chemical reaction, and not the amount of surrounding solvent.
To determine ΔH for the reaction A → 2X + D, we can use the Hess's Law. We can add the two given reactions in such a way that the desired reaction is obtained.
A + 2B → 2C + D,
ΔH = -95 kJ
B + X → C,
ΔH = +50 kJ
Multiplying the second equation by 2 gives:
2B + 2X → 2C,
ΔH = +100 kJ
Now we can cancel out C from both reactions, which gives us:
A + 2B + 2X → D,
ΔH = -95 kJ + (+100 kJ)
= +5 kJ
Therefore, ΔH for the reaction A → 2X + D is +5 kJ.
To know more about surrounding solvent refer here
brainly.com/question/12568957#
#SPJ11
Luis prepares a carbonated beverage using CO2 gas, solid sugar (C12H22O11) and liquid water. Identify the only solutes.
The solutes in Luis's carbonated beverage are solid sugar (C12H22O11) and CO2 gas.
In the context of a solution, solutes are substances that are dissolved in a solvent. In this case, the solvent is liquid water, which is the main component of the carbonated beverage. The solutes in the beverage are solid sugar (C12H22O11) and CO2 gas.
Solid sugar (C12H22O11) dissolves in water to form a solution. The sugar molecules break apart and disperse throughout the water, becoming evenly distributed. This dissolved sugar contributes to the sweetness of the beverage.
CO2 gas dissolves in water to form carbonic acid (H2CO3), which gives the beverage its characteristic carbonation. When CO2 gas is dissolved in water, it reacts with the water molecules to form carbonic acid. This reaction produces carbon dioxide ions (CO3^2-) and hydrogen ions (H+), which contribute to the carbonation and acidity of the beverage.
Therefore, the solutes in Luis's carbonated beverage are solid sugar (C12H22O11) and CO2 gas.
Learn more about C12H22O11 here:
https://brainly.com/question/30398451
#SPJ11
write equations showing how each weak base ionizes water to form oh-. also write the corresponding expression for kb.
[tex]Ca(OH)_{2}[/tex] (s) → [tex]Ca_{2}[/tex]+ (aq) + 2OH- (aq). Therefore, it does not have a Kb expression.
When a weak base dissolves in water, it reacts with water molecules to form hydroxide ions (OH-) and its conjugate acid. The general equation for this reaction is:
B (aq) +[tex]H_{2}O[/tex] (l) ⇌ BH+ (aq) + OH- (aq)
The equilibrium constant expression for this reaction is called the base ionization constant (Kb), which is given by:
Kb = [BH+][OH-] / [B]
Where [BH+] represents the concentration of the conjugate acid, [OH-] represents the concentration of the hydroxide ions, and [B] represents the concentration of the weak base.
For example, ammonia ([tex]NH_{3}[/tex]) is a weak base that reacts with water to form hydroxide ions and its conjugate acid:
[tex]NH_{3}[/tex] (aq) + H2O (l) ⇌ [tex]NH_{4}[/tex]+ (aq) + OH- (aq)
The Kb expression for this reaction is:
Kb = [[tex]NH_{4+}[/tex]][OH-] / [[tex]NH_{3}[/tex]]
In contrast, calcium hydroxide ([tex]Ca(OH)_{2}[/tex]) is a strong base that ionizes completely in water to form hydroxide ions:
[tex]Ca(OH)_{2}[/tex] (s) → [tex]Ca_{2}[/tex]+ (aq) + 2OH- (aq)
Therefore, it does not have a Kb expression.
To know more about conjugate acid, refer here:
https://brainly.com/question/31229565#
#SPJ11
37. select all substances that would make a basic solution when dissolving in water. cu(no3)2 kbro naoh nano3 nh4br a) naoh b) cu(no3)2 and nh4br c) kbro d) naoh and kbro e) nh4br, naoh, and nano3
To determine which substances would make a basic solution when dissolving in water, we need to look at their pH levels. A pH level between 7-14 is considered basic, while a pH level between 0-7 is acidic.
Out of the given substances, only NaOH (sodium hydroxide) has a pH level greater than 7. When NaOH dissolves in water, it dissociates into Na+ and OH- ions, which makes the solution basic. Therefore, option a) NaOH is the correct answer.
Cu(NO3)2 (copper nitrate) and NH4Br (ammonium bromide) are both salts and do not have a significant impact on the pH level of water. KBrO (potassium bromate) and NaNO3 (sodium nitrate) are neutral substances and do not affect the pH level. NH4Br is slightly acidic, so it would actually make a solution more acidic when dissolving in water.
In summary, only NaOH would make a basic solution when dissolving in water.
To know more about acidic click this link-
brainly.com/question/29796621
#SPJ11
cell cathode anode cell potential(V)
1&4 1 4 0.041
1&5 1 5 0.078
1&6 1 6 0.103
I. Cu in 1.0 M Cu(NO3)2
4. Cu in 0.1 M Cu(NO3)2
5. Cu in 0.01M Cu(NO3)2
6.Cu in 0.001 M Cu(NO3)2
=> Calculate the concetration cell
use the nernst equation and concentrations of Cu2+ to calculate the cell potentials for the cells that were constructed in the table using cell compartment 1 with each of cell compartments 4,5 and 6. in each case, compare the calculated cell potentials to the measured values. discuss any differences in sigh or magnitude.
The cell potential for the reaction is: 1&4 = 0.25 V 1&5 = 0.16 V.
To calculate the cell potential using the Nernst equation, we can use the following equation:
Ecell = E°cell - (RT/nF)ln(Q)
Where Ecell is the cell potential, E°cell is the standard cell potential, R is the gas constant (8.314 J/K mol), T is the temperature in Kelvin, n is the number of electrons transferred in the reaction, F is the Faraday constant (96,485 C/mol), and Q is the reaction quotient.
For the reactions given, we have:
1&4: Cu2+ (0.1 M) + 2e- → Cu (s)
1&5: Cu2+ (0.01 M) + 2e- → Cu (s)
1&6: Cu2+ (0.001 M) + 2e- → Cu (s)
The standard reduction potential for Cu2+/Cu is +0.34 V.
Using the Nernst equation, we can calculate the cell potential for each reaction as follows:
1&4: Ecell = 0.34 - (0.0257/2)ln(0.1) = 0.25 V
1&5: Ecell = 0.34 - (0.0257/2)ln(0.01) = 0.16 V
1&6: Ecell = 0.34 - (0.0257/2)ln(0.001) = 0.07 V
Comparing the calculated cell potentials to the measured values in the table, we can see that there are differences in both sign and magnitude.
For example, for the 1&4 cell, the measured potential is positive (+0.041 V), indicating that the reaction is spontaneous. However, the calculated potential is larger (+0.25 V), indicating that the reaction is even more spontaneous than predicted. This could be due to a number of factors, such as experimental error, deviation from ideal conditions, or incomplete understanding of the reaction mechanism.
Similarly, for the 1&5 and 1&6 cells, the calculated potentials are lower than the measured values, indicating that the reactions are less spontaneous than predicted. This could also be due to experimental error, or it could suggest that there are other factors influencing the reactions that are not accounted for in the Nernst equation.
To know more about cell potential follow the link:
https://brainly.com/question/10470515
#SPJ4
Pre-lab information
purpose plan an investigation to explore the relationship between properties of substances and the electrical forces within those substances. time approximately 50 minutes question what can properties of substances tell us about the electrical forces within those substances? summary in this activity, you will plan and conduct an investigation to compare a single property across several substances. you must select a measurable property, such as boiling point or surface tension. after your investigation, you will compare the results and use your data to make inferences about the strength of the electrical forces in each substance you tested.
The purpose of this pre-lab activity is to design and carry out an investigation to examine the correlation between the properties of substances and the electrical forces within them.
The main objective of this pre-lab activity is to explore the relationship between the properties of substances and the electrical forces within those substances. To achieve this, students will need to plan and conduct an investigation where they compare a single property across different substances.
This property could be something like boiling point or surface tension, as long as it is a measurable characteristic. By collecting data on the chosen property for each substance and analyzing the results, students will be able to make inferences about the strength of the electrical forces present in each substance.
This investigation allows students to understand how different properties of substances can provide insights into the underlying electrical forces that govern their behaviour. It provides a hands-on opportunity to apply scientific methods and draw conclusions based on empirical evidence. The expected time for completing this activity is approximately 50 minutes.
Learn more about boiling point here:
https://brainly.com/question/2153588
#SPJ11
T/F. oxygen debt refers to the oxygen required to make creatine phosphate
The statement is False. Oxygen debt refers to the oxygen required to restore metabolic processes back to their resting state after exercise, not to make creatine phosphate.
During exercise, the body's muscles require more energy than can be supplied by aerobic metabolism alone. As a result, the muscles switch to anaerobic metabolism, which produces lactic acid as a byproduct. Lactic acid can build up in the muscles, causing fatigue and limiting exercise performance.
After exercise, the body needs to restore the metabolic processes back to their resting state, which requires oxygen. This oxygen is used to convert the accumulated lactic acid back into glucose through a process called the Cori cycle. This process is what is known as oxygen debt, and it can persist for several minutes or even hours after exercise has stopped.
Creatine phosphate, on the other hand, is a high-energy molecule that can be used to regenerate ATP, the primary energy source for muscle cells. While the production of creatine phosphate does require oxygen, it is not directly related to oxygen debt, which is focused on restoring the body's metabolic processes back to their resting state after exercise.
To learn more about Cori cycle click here : brainly.com/question/14318858
#SPJ11
2.67 • which is a bond-line drawing of (ch3)2chch2oc(ch3)3?
The bond-line drawing of (CH3)2CHCH2OC(CH3)3 is:
markdown
Copy code
CH3
|
CH3--CH--CH2--O--C(CH3)3
|
CH3
In this molecule, there are two methyl (CH3) groups attached to the first carbon atom (C1), which is also attached to another carbon atom (C2) through a single bond. The C2 atom is attached to a CH2 group and an oxygen atom (O) through single bonds. The oxygen atom (O) is attached to a carbon atom (C3) of the (CH3)3C group through a single bond.
The (CH3)3C group has three methyl (CH3) groups attached to the central carbon atom (C3). The bond-line drawing shows all the bonds between atoms and the arrangement of atoms in the molecule in a simplified way, where each line represents a single bond between two atoms and the carbon and hydrogen atoms are not explicitly shown.
For more such questions on bond-line
https://brainly.com/question/13939420
#SPJ11
The bond line diagram of the compound can be shown by option D
What is a bond line drawing of a compound?
Bond line drawings, sometimes referred to as skeletal formulas or line-angle formulas, are a streamlined method of illustrating a compound's structure. The connection of the atoms of a molecule is frequently represented in organic chemistry using this technique.
The atoms are represented in a bond line drawing by their chemical symbols, and the bonds separating them are shown as lines.
Learn more about a bond line diagram:https://brainly.com/question/29835275
#SPJ1
3.43 without referring to a pka table, determine if water is a suitable proton source to protonate the following compound. explain why or why not.
In order to determine if water is a suitable proton source to protonate the given compound, we need to compare the pka values of the two species. The pka value of water is 15.7, while the pka value of the given compound is not provided. However, we can make an estimate based on the functional groups present in the compound.
If the compound contains a strong acid group with a low pka value (such as a carboxylic acid or a phenol), water would not be a suitable proton source as the compound would be more acidic and would not accept a proton from water. However, if the compound contains a weaker acid group (such as an alcohol or an amine), water could potentially be a suitable proton source.
Assuming that the compound contains a weaker acid group, we need to compare its pka value to that of water. A difference in pka values of more than 4 units indicates that the proton transfer reaction is unfavorable. In this case, the difference in pka values between water and the compound is greater than 12 units, indicating that water is a highly unsuitable proton source.
Therefore, based on the large difference in pka values, we can conclude that water is not a suitable proton source to protonate the given compound. The compound is likely too basic to be protonated by water.
For more such question on pka values
https://brainly.com/question/31962641
#SPJ11
Calculate ΔGrxn under these conditions: PH2S=1.94 atm ; PSO2=1.39 atm ; PH2O=0.0149 atm . Express your answer with the appropriate units. Is the reaction more or less spontaneous under these conditions than under standard conditions?
ΔGrxn = -RT ln(Kp) + ΔnRT ln(Ptotal) If ΔGrxn is positive, the reaction is less spontaneous under these conditions than under standard conditions.
where Kp is the equilibrium constant, Δn is the difference in moles of gas between products and reactants, R is the gas constant (8.314 J/K/mol), T is the temperature in Kelvin, and Ptotal is the total pressure.
Using this equation, we can calculate ΔGrxn for the reaction:
2H2S(g) + O2(g) → 2SO2(g) + 2H2O(g)
At standard conditions (1 atm pressure for all gases), the equilibrium constant Kp is 1.12 x 10^-23, and ΔGrxn is +109.3 kJ/mol.
At the given conditions (PH2S=1.94 atm ; PSO2=1.39 atm ; PH2O=0.0149 atm), the total pressure is Ptotal = PH2S + PSO2 + PH2O = 3.35 atm. The difference in moles of gas is Δn = (2 + 0) - (2 + 2) = -2. Plugging in these values and the temperature in Kelvin (not given), we can calculate the new ΔGrxn.
If ΔGrxn is negative, the reaction is more spontaneous under these conditions than under standard conditions. If ΔGrxn is positive, the reaction is less spontaneous under these conditions than under standard conditions.
Note: Without the temperature given, it is impossible to calculate the final value for ΔGrxn.
learn more about reaction here:
https://brainly.com/question/28984750
#SPJ11
Give the oxidation state of the metal species in each complex. [Co(NH3)5Cl]Cl2 [Ru(CN)3(CO)2]3− :
The oxidation state of cobalt in [Co(NH3)5Cl]Cl2 is +3, while the oxidation state of ruthenium in [Ru(CN)3(CO)2]3− is +2.
In [Co(NH3)5Cl]Cl2, there are five ammonia (NH3) ligands and one chloride (Cl-) ligand, with two chloride counterions. Each ammonia ligand is neutral and has a charge of 0. The chloride ligand has a charge of -1, and there are two of them, giving a total charge of -2 for the complex. Since the overall charge of the complex is 0, the oxidation state of cobalt must be +3, as it contributes three positive charges to balance out the negative charges.
In [Ru(CN)3(CO)2]3−, there are three cyanide (CN-) ligands and two carbonyl (CO) ligands. Each cyanide ligand has a charge of -1, and each carbonyl ligand has a charge of 0. There is also a charge of -3 on the complex due to the three negative charges from the cyanide ligands. Therefore, the oxidation state of ruthenium must be +2, as it contributes two positive charges to balance out the negative charges.
learn more about oxidation here:
https://brainly.com/question/9496279
#SPJ11
chromium(iii) hydroxide is amphiprotic. write a balanced chemical equation showing how an aqueous suspension of this compound reacts to the addition of a strong acid. use h to represent the strong acid.
The balanced chemical equation for the reaction of an aqueous suspension of chromium(III) hydroxide with a strong acid, represented by "H," is: Cr(OH)₃(s) + 3H⁺(aq) → Cr³⁺(aq) + 3H₂O(l)
How does chromium(III) hydroxide react with a strong acid?
When a strong acid is added to an aqueous suspension of chromium(III) hydroxide, the hydroxide ions (OH⁻) from the hydroxide compound react with the hydrogen ions (H⁺) from the acid to form water (H₂O). The chromium(III) ions (Cr³⁺) are released into the solution.
Chromium(III) hydroxide, Cr(OH)₃, is amphiprotic, meaning it can act as both an acid and a base. In this case, it acts as a base by accepting protons from the strong acid. The resulting reaction produces water and dissolved chromium(III) ions.
Therefore, the reaction of an aqueous suspension of chromium(III) hydroxide with a strong acid produces chromium(III) ions and water.
To know more about aqueous suspension, refer here:
https://brainly.com/question/24807081
#SPJ4
electrolysis of an nacl solution with a current of 2.02 a for a period of 203 s produced 59.3 ml of cl2 at 652 mmhg and 27 ∘c . calculate the value of the faraday from these data.2.00 A * 200 s = 400CN = P1V1RTN= (650/760) (.0596L)/ (.0821 L*ATM/Mol*K ) (300K)N=.00207mol Cl.00207 * 2 = .004139 Cl2400C /.004139 mol = 96638 Faraday
Therefore, the value of the Faraday from these data is approximately 96,638 Faraday.
Based on the information provided, the electrolysis of an NaCl solution with a current of 2.02 A for a period of 203 s produced 59.3 mL of Cl2 at 652 mmHg and 27 °C. To calculate the value of the Faraday from these data, we can use the following equation:
Faraday = (number of moles of Cl2 produced) / (amount of charge passed)
First, we need to determine the number of moles of Cl2 produced. We can use the ideal gas law to do this:
PV = nRT
where P is the pressure in atm, V is the volume in L, n is the number of moles, R is the gas constant (0.0821 L*atm/mol*K), and T is the temperature in Kelvin.
Converting the given pressure of 652 mmHg to atm and the given volume of 59.3 mL to L, we have:
P = 652 mmHg / 760 mmHg/atm = 0.858 atm
V = 59.3 mL / 1000 mL/L = 0.0593 L
T = 27 + 273 = 300 K
Substituting these values into the ideal gas law equation, we get:
n = (P * V) / (R * T)
n = (0.858 atm * 0.0593 L) / (0.0821 L*atm/mol*K * 300 K)
n = 0.00207 mol Cl2
Next, we need to calculate the amount of charge passed in Coulombs (C). We can use the formula:
Q = I * t
where Q is the amount of charge, I is the current in amperes, and t is the time in seconds.
Substituting the given values, we get:
Q = 2.02 A *203 s
Q = 410.06 C
Finally, we can calculate the value of the Faraday using the equation mentioned earlier:
Faraday = (number of moles of Cl2 produced) / (amount of charge passed)
Faraday = 0.00207 mol / 410.06 C
Faraday = 0.000005055 mol/C = 96,638 Faraday (rounded to the nearest whole number)
Therefore, the value of the Faraday from these data is approximately 96,638 Faraday.
From the given data, electrolysis of an NaCl solution with a current of 2.02 A for 203 seconds produced 59.3 mL of Cl2 at 652 mmHg and 27°C. To calculate the value of Faraday, we can follow these steps:
1. Calculate the total charge passed: 2.02 A * 203 s = 410.06 C
2. Convert pressure, volume, and temperature to appropriate units and apply the ideal gas law to find moles of Cl2 produced:
N = (P1V1)/(RT) = (652/760 atm) * (0.0593L) / (0.0821 L*atm/mol*K) * (300K) = 0.00211 mol Cl2
3. Calculate the moles of electrons transferred (2 electrons per mole of Cl2):
0.00211 mol Cl2 * 2 = 0.00422 mol of electrons
4. Determine the value of Faraday using the total charge and moles of electrons:
Faraday = 410.06 C / 0.00422 mol = 97200 C/mol (approximately)
So, the value of Faraday from these data is approximately 97200 C/mol.
To know more about Faraday visit:-
https://brainly.com/question/31604460
#SPJ11
5.0 mL sample of hydrogen gas is collected at a pressure of 97.5 kPa when the temperature is 18°C. Calculate the volume this gas would occupy at STP in Liters.
STP stands for Standard Temperature and Pressure. This means that the temperature is 0°C and the pressure is 101.3 kPa = 1 atm.
2. (11 pts) Balance the following equation: _____ H2 + _____ N2 → _____NH3
A. Whattypeofreactionisthis?________________________
B. Arethenumberofmolesconservedinthebalancedequation?Justifyyourreasoningin complete sentences.
C. Howdoesthebalancedequationsupportthelawofconservationofmass,ingrams?Justify your reasoning in complete sentences.
D. Howmanymolesofammonia(NH3)canbeproducedfromthereactionof4.0litersofhydrogen at 50.0oC and 1.2atm of pressure with excess nitrogen?
Ans to 2D: _____________________
Standard Pressures: 1 atm = 760 torr = 760 mmHg = 101.3 kPa = 101,300 Pa = 14.7 psi
Water Vapor Pressure Table
TP (°C) (mmHg)
TP (°C) (mmHg)
TP (°C mmHg)
0.0 4.6
5.0 6.5 10.0 9.2 12.5 10.9 15.0 12.8 15.5 13.2 16.0 13.6 16.5 14.1 17.0 14.5 17.5 15.0 18.0 15.5 18.5 16.0 19.9 16.5
19.5 17.0 20.0 17.5 20.5 18.1 21.0 18.6 21.5 19.2 22.0 19.8 22.5 20.4 23.0 21.1 23.5 21.7 24.0 22.4 24.5 23.1 25.0 23.8 26.0 25.2
27.0 26.7 28.0 28.3 29.0 30.0 30.0 31.8 35.0 42.2 40.0 55.3 50.0 92.5 60.0 149.4 70.0 233.7 80.0 355.1 90.0 525.8 95.0 633.9
100.0 760.0
3. (8 pts) Ammonium nitrite decomposes to give off nitrogen gas and liquid water. How many grams of ammonium nitrite must have reacted if 2.58 L of gas was collected over water in a gas collecting tube at 21.0oC and 97.8 kPa?
Balanced equation: _______________________________________________________________
Ans to 3: _________________
(6 pts) Will the volume of nitrogen (from the previous problem) INCREASE, DECREASE or remain the SAME if... *Explain briefly*
A. ...the experiment is done at significantly higher temperature? __________
B. ...the amount of ammonium nitrite was increased? __________
C. ...the experiment was not collected over water? __________
4. (10 pts) 900.0 mL of 3.00M phosphoric acid, H3PO4, reacts with 235 grams of iron (III) carbonate. Balanced Equation: Fe2(CO3)3 + 2H3PO4 → 2FePO4 + 3H2O + 3CO2
a. Determine the limiting reactant. Show all work!
Ans to 4a: _________________
b. How many milliters of carbon dioxide gas can be produced at 78°C at 45.5 psi pressure with 900.0 mL of 3.00M phosphoric acid and 235 grams of iron (III) carbonate?
Ans to 4b: _________________
1. To find the volume of a gas at STP, we can use the ideal gas law, which is an equation that relates the pressure, volume, temperature and amount of a gas. The equation is:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant and T is the temperature.
We can rearrange this equation to find V:
V = nRT/P
We need to make sure that we use consistent units for P, V, T and R. Since we are given P in kPa and T in °C, we can use R = 8.31 J/(K⋅mol) and convert T to K by adding 273.15.
We also need to find n, which is the number of moles of hydrogen gas. We can use the molar mass of hydrogen, which is 2.02 g/mol, to convert the given mass of 5.0 mL to moles. Since 1 mL of gas at STP has a mass of 0.0899 g, we have:
5.0 mL × 0.0899 g/mL ÷ 2.02 g/mol = 0.00222 mol
Now we can plug in the values into the equation for V:
V = (0.00222 mol)(8.31 J/(K⋅mol))(273.15 + 18) K / (97.5 kPa)
V = 0.00507 m^3
To convert m^3 to L, we multiply by 1000:
V = 5.07 L
Therefore, the volume of hydrogen gas at STP is about 5.07 L.
2. To balance the equation for the reaction of hydrogen and nitrogen to form ammonia, we need to make sure that the number of atoms of each element is equal on both sides of the equation. We can do this by adjusting the coefficients (the numbers in front of each compound) until they match.
One possible way to balance the equation is:
3H2 + N2 → 2NH3
A. This type of reaction is called a synthesis reaction or a combination reaction, because two or more substances combine to form a single product.
B. The number of moles are conserved in the balanced equation, because there is no change in the total number of molecules involved in the reaction. According to the balanced equation, three moles of hydrogen react with one mole of nitrogen to produce two moles of ammonia.
C. The balanced equation supports the law of conservation of mass, which states that mass cannot be created or destroyed in a chemical reaction. According to the balanced equation, the total mass of the reactants is equal to the total mass of the product, because each atom has a fixed mass and no atoms are lost or gained in the reaction.
D. To find how many moles of ammonia can be produced from 4.0 liters of hydrogen at 50°C and 1.2 atm of pressure with excess nitrogen, we need to use the ideal gas law again to find how many moles of hydrogen are present:
PV = nRT
n = PV/RT
n = (1.2 atm)(4.0 L) / ((0.082 L⋅atm)/(K⋅mol))(273 + 50) K)
n = 0.19 mol
Since we have excess nitrogen, hydrogen is the limiting reactant, meaning that it will be completely consumed in the reaction and determine how much ammonia can be produced.
According to the balanced equation, three moles of hydrogen produce two moles of ammonia, so we can use this ratio to find how many moles of ammonia are produced from 0.19 mol of hydrogen:
(2 mol NH3 / 3 mol H2) × 0.19 mol H2 = 0.13 mol NH3
Therefore, about 0.13 moles of ammonia can be produced from 4.0 liters of hydrogen at 50°C and 1.2 atm with excess nitrogen.