the child is receiving d10ns with 20 meq kcl infusing at 100 ml/hr. a new 1,000- ml fluid bag was hung at 0700. at 0800 the iv infiltrated and was restarted at 1000. at 1100 the iv rate was decreased to 50 ml/hr until 1900. calculate the total iv intake from 0700 to 1900.

The molality of the solution is 0.756 mol/1.90 kg = 0.398 molal.

To calculate the molality of a solution, you must first calculate the moles of the solute present in the solution.

To do this, you must use the molar mass of the solute and the amount of solute present in the solution. In this case, the amount of solute is 151 g of calcium bromide. The molar mass of calcium bromide is 199.89 g/mol [1], so the number of moles of calcium bromide is 151/199.89 = 0.756 mol.

Next, we must calculate the mass of the solvent, which is 1.90 l of water. The density of water is 1.000 g/ml, so the mass of the solvent is 1.90 l x 1.000 g/ml = 1.90 kg.

Finally, we can calculate the molality of the solution using the formula molality = moles of solute/kg of solvent. In this case, the molality of the solution is 0.756 mol/1.90 kg = 0.398 molal.

Learn more about molality of a solution:

https://brainly.com/question/30463605

#SPJ4

The metal ions in these compounds are formed by the two-electron oxidation of neutral metal atoms.

Oxidation is a chemical reaction in which an atom loses electrons to become positively charged. This process results in the formation of an oxidized species and a reduced species. In other words, one species loses electrons while the other gains electrons. The oxidized species is called the oxidant, and the reduced species is called the reductant. Oxidation can occur in both organic and inorganic compounds.

For example, the oxidation of iron in air produces iron oxide (rust). In biological systems, oxidation reactions are an essential part of cellular metabolism, providing energy for the organism. The process of oxidation is crucial for many biological and physical processes, but it is also important to control and prevent excessive oxidation, in order to maintain health and protect against disease.

To learn more about Oxidation visit here:

brainly.com/question/16976470

#SPJ4

Dipoles occur when electrons are shared unequally between atoms in the same molecule due to a high difference in the electronegativity of the atoms involved.

Non-polar covalent bonds, polar covalent bonds, and ionic bonds are the three types of bonding that you need to be familiar with.

The electrons in non-polar covalent bonds are distributed equally among the atoms. The electrons are not distributed equally among the atoms in polar covalent connections. The electrons are transported in ionic connections.

Pauling's scale of electronegativity provides the values for electronegativity.  

Therefore, Dipoles occur when electrons are shared unequally between atoms in the same molecule due to a high difference in the electronegativity of the atoms involved.

To learn more about Dipole, refer to the link:

https://brainly.com/question/30466194

#SPJ6

When hydrochloric acid solution with a ph of 2 splashes in your eye we shoiuld:Use water to clean your eye. For at least 20 minutes, soak in pristine, lukewarm tap water. Use whichever of these methods takes the least time.

Step inside the shower and gently spray your forehead over the troubled eye. If both of your eyes are afflicted, you might also aim the stream at your nose's bridge. Keep the afflicted eye or eyes' lids open.

Turn your head to the side and lower it. Hold your afflicted eye's lids open while it is submerged in a softly flowing faucet. Use the eye-rinse station on the job site if you have access to one.

It could be ideal for young children to lie down in the bathtub or lean back over a sink. Pour water in a slow stream.

To know more about hydrochloric acid visit

https://brainly.com/question/24586675

#SPJ4

The solubility of NaCl when a saturated solution of NaCl is formed by adding 500g of NaCl to 0.500l of water where the excess solid NaCl is filtered from the solution is 5.23.

Given the mass of NaCl (m1) = 500g

The volume of water (V) = 0.5L

The reduced mass of NaCl (m2) = 346.8g

Filtered from the solution, the excess solid NaCl is dried in an oven.

The mass of NaCl dissolved in water = m1 - m2 = 500 - 346.8 = 153.2g

The mass of NaCl that will dissolve in 1L of water is = 2 x 153.2 = 306.4g/dm³

58.5g/mole is The molecular weight of NaCl

The amount of a substance in mol that will dissolve in 1 L or 1 dm³ of solution is known as its solubility.

Solubility in (g/dm³)/molar mass equals solubility in (mol/dm³).

(mol/dm³) solubility = 306.4/58.5

5.23 mol/dm³ is the solubility in (mol/dm³)

To learn more about solubility click here https://brainly.com/question/28170449

#SPJ4

-16.2 kJ is the ΔHr0 of the calorimeter.

The only question is to perform a calorimeter experiment using a calorimeter with 500 mL of water in the outer chamber to determine the reaction enthalpy of the chemical reaction. The initial temperature of the water is 25 degrees. The temperature of the water after the reaction is 457.4 degrees Celsius. To do this, calculate H in relation to the heat loss through the walls of the vessel. F. Here the volume of water is 500 ml, which corresponds to 57.4 °C at 25 °C. This corresponds to 32.4°C. The heat capacity of water is given as 4.18 Joules. Q is known to be equal to structure T. So in 4.18 32.4 is equivalent to 500g. Multiply this to -16.2 kJ. Therefore -16.2 kJ is the ΔHr0 of the calorimeter.  

Learn more about calorimeter

brainly.com/question/27828855

#SPJ4

A scientific question that Carl could test about the litter in the stream is Do the chemicals in plastic harm fish in the stream. Therefore, the correct option is option C.

Water pollution is defined as the discharge of pollutants into underground groundwater or into lakes, rivers, rivers, estuaries, including seas to the extent that the contaminants interfere with beneficial water usage or the normal functioning of ecosystems.

Water pollution may involve the discharge of energy into bodies of water, in the shape of radioactivity or heat, in addition to the release of things such as chemicals, debris, or germs. A scientific question that Carl could test about the litter in the stream is Do the chemicals in plastic harm fish in the stream.

Therefore, the correct option is option C.

To learn more about water pollution, here:

https://brainly.com/question/28457698

#SPJ1

The energy is produced by a reversible chemical reaction involving the transfer of electrons between the two electrodes of the battery.

A reversible chemical reaction is one in which the products of the reaction can react with each other to form the reactants again. This type of reaction is often represented by an equation that has both the forward and reverse reactions written out. Examples of reversible reactions include the dissociation of salts, the Haber process, and the reaction between hydrogen and oxygen to form water.

This reaction produces an electric current that flows through the circuit connected to the battery. The chemical reaction is reversible, meaning that when energy is applied, the chemical reaction occurs and the energy is stored. When the energy is released, the chemical reaction reverses and the energy is released back out of the battery.

To learn more about reversible chemical reaction
https://brainly.com/question/13315935
#SPJ4

Explanation:

To determine the number of grams of oxygen needed to react completely with 7.56 moles of iron, we need to balance the equation first:

Fe + O2 -> Fe2O3

2 Fe + 3 O2 -> 2 Fe2O3

Next, we can use the mole ratio between the reactants to find the number of moles of oxygen required for the reaction.

From the balanced equation, we can see that for every two moles of iron, three moles of oxygen are required. So, for 7.56 moles of iron, we would need:

7.56 moles Fe * (3 moles O2 / 2 moles Fe) = 11.34 moles O2

Finally, to convert moles to grams, we use the molar mass of oxygen gas, which is 32 g/mol.

11.34 moles O2 * (32 g/mol) = 364.48 g O2

So, 364.48 g of oxygen gas would be needed to react completely with 7.56 moles of iron according to the equation Fe + O2 -> Fe2O3.

Warming ocean temperatures play a crucial role in amplifying global temperatures, as oceans cover about 70% of the Earth's surface and have a large heat capacity.

As the ocean temperature increases, it releases heat into the atmosphere, which contributes to the overall warming of the planet.

In addition, warming oceans can lead to changes in ocean currents and circulation patterns, which can disrupt regional climates. It can also lead to the bleaching of coral reefs and the loss of marine habitats, negatively impacting the biodiversity of the oceans.

Moreover, the ocean absorbs about a quarter of the carbon dioxide (CO2) emitted by human activities, leading to ocean acidification. As CO2 levels in the ocean increase, the acidity of the ocean increases, making it difficult for some marine species, such as mollusks and crustaceans, to build their shells and skeletons.

In conclusion, warming ocean temperatures are a serious concern because they can contribute to a cascade of negative impacts, including rising sea levels, changes in ocean currents and circulation, harm to marine ecosystems, and ocean acidification. These impacts can have far-reaching consequences for the Earth's climate and the well-being of human societies and ecosystems.

To know more about ocean here

https://brainly.com/question/16237714

#SPJ4

Bronze is a homogeneous mixture of mostly copper with small amounts of another metal, such as tin. The solvent is coper and the solute is tin or small amounts of another metal. The solutions made from a metal and other solids called alloy.

Bronze is a uniform alloy made primarily of copper with trace amounts of other metals, like tin. Tin or trace amounts of one or more other metals are the solute and coper is the solvent. Alloys are mixtures created from metals and other substances.

Alloy, often known as a compound or a solution, is a metallic substance made up of two or more elements. Although carbon, a nonmetal, is a crucial component of steel, the components of alloys are typically metals themselves.

Learn more about alloy at https://brainly.com/question/29461159

#SPJ4

The correct formula for the ionic compound that would result from the combination of lithium and sulfur is Lithium sulfide.

An ionic compound is composed of cation and anion, that are strongly held together by strong ionic interactions.  They are made up of particles that are arranged in a repeating pattern. Sulfur and lithium can form an ionic compound named lithium sulfide. Sulfur exists are sulfide with -2 charge on it while lithium belong to alkali metals exhibiting +1 charge or valency.

Thus, the compound so formed is lithium sulfide with the molecular formula as Li2S.

To learn more about ionic compound check the link below:

https://brainly.com/question/2687188

#SPJ4

According to stoichiometry, for every 6 moles of hydrogen 6 moles of water is produced.For every 2 moles of hydrogen 2 moles of water is produced.For every 5.67  moles of hydrogen 5.67 moles of water is produced.

It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.As the stoichiometry of hydrogen to water is 2:2 same number of moles of water will be produced as that of hydrogen, that is 2 and 5.67 moles respectively.

Learn more about stoichiometry,here:

https://brainly.com/question/30215297

#SPJ1

Sand is absolutely composed of small particles of silicon dioxide. Sand can be classified as ceramics.

The silicon dioxide is a compound. It is an oxide of Silicon. The oxide are formed by the reaction of an element with the oxygen. In silicon dioxide, the silicon reacts with two oxygen molecule to form silicon dioxide. So, the two elements present in the silicon dioxide would be silicon and oxygen.

Ceramics can be defined as inorganic non-metallic materials which harden at high temperatures. The atomic structure of ceramics can be crystalline, non-crystalline, or semi-crystalline.  However, most ceramics have a crystalline atomic structure.

Learn more about ceramics:

brainly.com/question/29455196

#SPJ4

The mechanism of glyceraldehyde 3-phosphate dehydrogenase in glycolysis  does not include phosphorylation of the substrate using ATP. Hence, option a is false.

Glyceraldehyde 3-phosphate dehydrogenase, or GAPDH, is an enzyme with a molecular mass of approximately  37 kDa that catalyzes glycolysis' sixth stage, converting glucose into energy and carbon molecules.

Initially, the carbonyl group of GAP is attacked by a cysteine residue in the active site of GAPDH, resulting in the formation of a hemithioacetal intermediate (covalent intermediate).

At the active site of the enzyme, a histidine residue deprotonates the hemithioacetal . In the ensuing thioester intermediate, deprotonation promotes the reformation of the carbonyl group and the ejection of a hydride ion. Not any step include the use of ATP. Thus, option a is false.

Find more on glycolysis:

https://brainly.com/question/15159050

#SPJ1

Your question is incomplete. But, your complete question probably was:

The mechanism of glyceraldehyde-3-phosphate dehydrogenase does NOT involve. true or false?

A phosphorylation of the substrate using ATP.

B oxidation and phosphorylation of the substrate.

C a covalent intermediate.

D an active site histidine to serve as a proton acceptor.

Monosaturated fatty acid contains

B. One double bond

Monounsaturated fatty acids contain one double bond.

Monounsaturated fatty acids are fatty acids that contain one double bond in their carbon chain. This results in a kink in the shape of the fatty acid molecule, which affects its physical and chemical properties. Monounsaturated fatty acids are considered a healthier alternative to saturated fatty acids, which contain no double bonds and can raise cholesterol levels. Monounsaturated fatty acids are found in foods such as olive oil, avocado, and nuts.

Learn more about fatty acids here:

https://brainly.com/question/5710423

#SPJ4

The combustion reaction of butane gives carbon dioxide and water as written below:

[tex]\rm C_{4} H_{10} + 8O_{2} \rightarrow 4 CO_{2} + 8H_{2}O[/tex]

Similarly the reaction  between Zn and copper nitrate can be written as follows:

[tex]\rm 2 Zn +Cu(NO_{3})_{2} \rightarrow 2ZnNO_{3} + Cu[/tex]

The balanced equation  of a reaction shows the perfect stoichiometry of reactants and products. The number of each elements in the reactants must be equal to their number in the product side.

The crisscross method of the formula is written as giving the charge of the cationic part as the subscript to the anionic part and vice versa.

The remaining reactions can be completed as following :

[tex]\rm NaOH + KBr \rightarrow NaBr + KOH[/tex]

[tex]\rm2 Li + S_{2} \rightarrow 2 Li S[/tex]

Similarly the decomposition of water can be  written as:

[tex]\rm 2 H_{2}O \rightarrow H_{2} + O_{2}[/tex]

Find more on balanced chemical equations:

https://brainly.com/question/13103210

#SPJ1

The heat energy required to boil 75.25 g of ethanol is 61.05 kJ or 61,050 J.

The heat of vaporization is the amount of heat energy required to convert a given amount of a substance from its liquid state to its gaseous state. It is expressed in units of energy per unit of mass, such as joules per gram or kilojoules per gram.

In this case, the heat of vaporization for ethanol is given as 0.826 kJ/g. To calculate the heat energy in joules required to boil a specific mass of ethanol, we multiply the heat of vaporization by the mass of ethanol.

For example, if we want to calculate the heat energy required to boil 75.25 g of ethanol, we simply multiply the heat of vaporization by the mass of ethanol:

0.826 kJ/g * 75.25 g = 61.05 kJ

So, the heat energy required to boil 75.25 g of ethanol is 61.05 kJ or 61,050 J.

To know more about energy

https://brainly.com/question/1932868

#SPJ4

The standard plate count (SPC) method is a widely used and simple method for enumerating bacteria in food and water samples. The advantage of using the SPC method over other enumeration methods is that it is a relatively low-cost and straightforward method.

that can provide a general estimate of the number of bacteria present in a sample. This method involves spreading a known volume of the sample onto a solid growth medium, incubating the plate, and counting the number of colonies that develop. The result is an estimate of the number of viable bacteria in the original sample. This method is useful for determining the general level of bacterial contamination in a sample and for monitoring changes in bacterial populations over time. However, it has some limitations, including the fact that not all bacteria will grow on the specific medium used and that some bacteria may be damaged or killed during the sample preparation and spreading process

You can read more about standard plate count  at https://brainly.com/question/29489516

#SPJ4

The molar mass of potassium nitrate is 101.102 g/mol while that of potassium nitrite is 85.103 g/mol.

Potassium nitrate goes by the chemical formula [tex]KNO_3[/tex].

K = 39.098

N = 14.007

O = 15.999

Molar mass of  [tex]KNO_3[/tex] = 39.098 + 14.007 + (3x15.999)

                                    = 101.102 g/mol

Potassium nitrite goes by the chemical formula, [tex]KNO_2[/tex].

Molar mass of [tex]KNO_2[/tex] = 39.098 + 14.007 + (2x15.999)

                                   = 85.103 g/mol

In other words, the molar masses of KNO3 and KNO2 are 101.102 g/mol and 85.103 g/mol respectively.

More on molar masses can be found here: https://brainly.com/question/22997914

#SPJ1

When steam (H₂O(g)) is added to the equilibrium mixture of H₂O(g), CO(g), H₂(g), and CO₂(g), it will affect the position of the equilibrium.

The reaction between CO and H₂ to form CO₂ and H₂O is exothermic, meaning that it releases heat, and is described by the following equation:

CO(g) + H₂(g) ⇔ CO₂(g) + H₂O(g)

When steam is added to the system, it will increase the concentration of H₂O(g), which acts as a reactant in the forward reaction and a product in the reverse reaction. This will shift the equilibrium towards the reactants (CO(g) and H₂(g)) to maintain a constant concentration of products. The addition of steam will decrease the concentration of CO₂(g) and H₂(g) and increase the concentration of CO(g) and H₂O(g).

This shift in the equilibrium position will cause the reaction to be more favorable towards the formation of CO and H₂O, which are the products of the reaction, rather than CO₂ and H₂, which are the reactants. This is because the equilibrium constant for the reaction (Kc) is proportional to the product of the concentrations of the products over the product of the concentrations of the reactants.

To know more about equilibrium mixture here

https://brainly.com/question/13082748

#SPJ4

In the reaction having an excess of K and 0.43 mol Cl₂, the mass of KCI that will be produced is 64 grams.

In the reaction equation

K+ Cl₂ → KCI

We balance the reactions.

2K+ Cl₂ → 2KCI

1 mole of Cl₂ will give 2 moles of KCl

Because of that,

0.43 mol Cl2 will result from = 0.43 × 2 = 0.86 mol KCl.

Then the mass of KCl is:

Moles of KCl = 0.86 mol

Molar mass of KCl = 74.55 g/mol

So:

Moles = mass/molar mass

Mass of KCl = moles × molar mass

Mass of KCl = 0.86 × 74.55

Mass of KCl = 64 grams

So, the mass of KCl is 64 grams.

Learn more about the mass of reaction at https://brainly.com/question/14625400.

#SPJ1

The empirical formula of ibuprofen is C13H18O2.

Moles of carbon = 75.69⋅g / 12.011⋅g⋅mol ^−1 = 6.30⋅mol.

Moles of hydrogen = 8.80⋅g / 1.00794⋅g⋅mol ^−1 =8.73⋅mol.

Moles of oxygen = 15.51⋅g / 15.999⋅g⋅mol ^−1 =0.969⋅mol.

The empirical formula is the simplest whole number ratio defining constituent atoms in a species. So we double this trial formula to get;

C13H18O2

The empirical formula is a simple representation of the relative number of atoms of each element present in a chemical compound. It gives the lowest whole number ratio of atoms in a molecule. For example, the empirical formula of glucose is CH2O, which represents that there are 2 hydrogen atoms, 1 carbon atom, and 6 oxygen atoms in one molecule of glucose. The empirical formula is different from the molecular formula, which gives the exact number of atoms of each element in a molecule.

Empirical formulas are useful for determining the molecular structure of a compound based on its elemental composition. They can also be used to calculate the molecular formula by multiplying the coefficients in the empirical formula by a factor that gives the correct molecular weight.

To learn more about Empirical formula visit here:

brainly.com/question/1363167

#SPJ4

hexanol or hexane: hexanol, propanol or butanol: butanol, dimethyl ether or ethanol: ethanol, pentanoic acid or pentanal: pentanoic acid

Enthalpy of vaporization is a measure of the amount of energy required to convert a substance from a liquid to a gas. In general, substances with higher molecular weights, polarities, and hydrogen bonding tend to have higher enthalpies of vaporization.

In the case of hexanol and hexane, hexanol has a higher molecular weight and is more polar due to the presence of a hydroxyl group. This results in a higher enthalpy of vaporization compared to hexane.

Similarly, butanol has a higher molecular weight compared to propanol and more hydrogen bonding due to the presence of a tertiary carbon atom, making it more polar. This results in a higher enthalpy of vaporization for butanol.

Ethanol has a higher molecular weight and is more polar compared to dimethyl ether. This leads to a higher enthalpy of vaporization for ethanol.

Pentanoic acid has a higher molecular weight and is more polar compared to pentanal, due to the presence of a carboxylic acid group. This results in a higher enthalpy of vaporization for pentanoic acid.

Learn more about hexane here:

https://brainly.com/question/14640336

#SPJ4

The molar mass of C4H10 is 58.12 g/mol, and the molar mass of O2 is 32.00 g/mol. When these two reactants combine, the reaction produces 44.01 g of CO2 for each mole of C4H10 and O2. The percent yield for the reaction is 100.84%.

Molar mass is a measure of the mass of a single molecule of a substance and is expressed in units of grams per mole (g/mol). It is calculated by taking the sum of the atomic masses of each atom in the molecule, multiplied by the number of atoms of each kind in the molecule. For example, the molar mass of water (H2O) is 18.015 g/mol, which is calculated by adding the atomic masses of two hydrogen atoms (2 x 1.0079 g/mol) and one oxygen atom (16.00 g/mol). Molar mass is important in chemistry, as it is often used to calculate the number of moles of a substance. It can also be used to help determine the concentration of a solution, and to calculate the mass of an element or compound in a known volume.

balanced equation

2C4H10 + 15O2 -----> 8CO2 + 10H2O

from the balanced equation

15 mol of O2 is giving 8 mol of CO2 this is if you talk in terms of moles

where as if you talk in terms of grams

15 x 32 gr O2 is giveng 8 x 44 gr CO2

480 gr O2 is giving 352 gr CO2

6.49 gr O2 will give 6.49 x 352 / 480 = 4.759 gr of CO2 this is theretically from the equation

but actually he got 4.80 gr

now

% of yield = actual / thritical  x 100

= 4.80 / 4.76 x 100

= 100.84%

Thus, The percent yield for the reaction is 100.84%.

To learn more about molar mass

https://brainly.com/question/30459977

#SPJ4

1 liter of each stock solution is required to make 1.0L of 0.10M Hepes buffer at pH.

Stock solutions are prepared by weighing the appropriate amount of pure solid or measuring the appropriate amount of pure liquid, placing it in a suitable flask, and diluting to a known volume. The exact method of measuring a reagent depends on the desired concentration unit. To determine the amount of stock solution required to make buffer, divide the number of moles of glucose by the molarity of the stock solution.

mole = volume * molarity

= 1 * 0.1

= 0.1 mol

Volume = 0.1/0/1

= 1L 

Learn more about buffer

brainly.com/question/13076037

#SPJ4

if anything, is incorrect about the drawing,It violates hunds rule.

According to Hund's rule, before any orbital may be occupied by two electrons, electrons are added to the atomic orbitals with the same energy levels (degenerate orbitals) in such a manner that each orbital is occupied by a single electron with the same spin (either +12 or -12).This rule applies to the ground state of an atom, and determines the spin multiplicity of the state. It is named after the German physicist Friedrich Hund, who formulated the rule in 1927. This rule is most easily understood by looking at the electron configuration of an atom. Electrons fill orbitals in order of increasing energy, and they fill orbitals of equal energy in order of increasing angular momentum. Thus, the electrons fill the orbitals one by one, with the same spin, until each orbital has a single electron.

learn more about Hund's rule Refer:brainly.com/question/12646067

#SPJ4

complete question:A student draws the orbital diagram below for the 3d electrons in a V atom. What, if anything, is incorrect about the drawing?

{^v}{^ }{ }{ }{ }

3d

a. It violates the aufbau principle

b. it violates the pauli exclusion principle

c. it violates the heisenburg uncertainty principle

d. it violates hunds rule

e. there is nothing wrong about the picture

Lower reaction rates result from higher activation energies.

What function does activation energy serve in chemical reactions?

Exothermic reactions, like all other chemical reactions, require activation energy to start. Reactants need activation energy to move together, overcome repellent forces, and start bond breaking.

The term "rate of reaction" or "reaction rate" refers to the speed at which reactants transform into products. The rate of a chemical reaction and its activation energy are closely related. Particularly, the higher the activation energy, the slower the chemical reaction will proceed. This is because molecules can only complete a reaction after overcoming the activation energy barrier.

To learn more about rate of reaction use link below:

https://brainly.com/question/24795637

#SPJ1

O2 is both a reactant and a product in chemical reactions. During a reaction, oxygen molecules (O2) are consumed as a reactant

O2 is both a reactant and a product in chemical reactions. new oxygen molecules are formed as a product. This is how oxygen is recycled in nature.Oxygen is also found in microorganisms, where it is used for respiration and energy production. Plants are also able to use oxygen for respiration and for the production of energy. Plants also store oxygen in their cell walls and in their tissue, allowing them to absorb more oxygen from their environment. Additionally, oxygen is part of the structure of some plant cells, as a component of their cell walls and membranes.

Learn more about oxygen here:

https://brainly.com/question/1506082

#SPJ4