the chemical formula for t-butanol is: ch33coh calculate the molar mass of t-butanol. round your answer to 2 decimal places.

Answers

Answer 1

Rounded to 2 decimal places, the molar mass of t-butanol is 74.14 g/mol.

The molar mass of t-butanol can be calculated by adding the atomic masses of all its constituent atoms. The chemical formula of t-butanol (C4H9OH) indicates that it contains 4 carbon atoms, 10 hydrogen atoms, and 1 oxygen atom.

The atomic masses of carbon, hydrogen, and oxygen are 12.01 g/mol, 1.01 g/mol, and 16.00 g/mol, respectively. Using these values, we can calculate the molar mass of t-butanol as:

Molar mass of t-butanol = (4 × 12.01 g/mol) + (10 × 1.01 g/mol) + (1 × 16.00 g/mol)
= 48.04 g/mol + 10.10 g/mol + 16.00 g/mol
= 74.14 g/mol

Therefore, the molar mass of t-butanol is 74.14 g/mol, rounded to 2 decimal places.

More on molar mass: https://brainly.com/question/22997914

#SPJ11

Answer 2

The molar mass of t-butanol (C4H9OH) can be calculated by adding up the atomic masses of its constituent atoms.

The atomic mass of carbon (C) is 12.01 g/mol, hydrogen (H) is 1.01 g/mol, and oxygen (O) is 16.00 g/mol.

Therefore, the molar mass of t-butanol can be calculated as follows:

Molar mass = (4 x 12.01 g/mol) + (10 x 1.01 g/mol) + (1 x 16.00 g/mol)
= 74.12 g/mol

Rounding to 2 decimal places, the molar mass of t-butanol is 74.12 g/mol.

If you need to learn more about molar mass, click here

https://brainly.in/question/11461123?referrer=searchResults

#SPJ11


Related Questions

what is the formula of the coordination compound hexaaquanickel(ii) sulfate?

Answers

The coordination compound hexaaquanickel(II) sulfate can be represented by the chemical formula [tex]Ni(H_{2}O)_{62}[/tex].

The compound has a nickel ion ([tex]Ni_{2+}[/tex]) at its center, surrounded by six water molecules ([tex]H_{2}O[/tex]) as ligands. Each water molecule forms a coordinate covalent bond with the nickel ion using its lone pair of electrons. The sulfate ion [tex](SO_{4})_{2-}[/tex] acts as a counterion to balance the charge of the complex.

The prefix "hexaaqua" in the name indicates that there are six water molecules coordinated to the central nickel ion. The Roman numeral (II) in the name indicates the oxidation state of the nickel ion, which is +2.

To know more about covalent bond, refer here:

https://brainly.com/question/19382448#

#SPJ11

using proton nmr how could you experimentally determine that you have the trans isomer rather than the cis one?

Answers

To experimentally determine the trans isomer rather than the cis isomer using proton nuclear magnetic resonance (NMR) spectroscopy, you would observe the chemical shifts and coupling constants in the NMR spectrum. The trans isomer will display different coupling patterns and chemical shift values compared to the cis isomer due to distinct spatial arrangements of the protons.

In proton NMR, the chemical shifts of protons are influenced by their surrounding electron densities and their spatial arrangements with respect to neighboring protons. Trans isomers have protons situated further apart from each other, while cis isomers have protons in closer proximity. This results in a significant difference in the chemical shifts observed in their respective spectra.

Moreover, coupling constants, represented by J values, provide information about the relative orientation of protons. Trans isomers usually exhibit smaller coupling constants compared to cis isomers because the spatial arrangement of the protons in the trans isomer causes less interaction between them.

By comparing the NMR spectra of your sample to reference spectra of known cis and trans isomers, you can identify which isomer you have based on the differences in chemical shifts and coupling constants. A careful analysis of the proton NMR spectrum will enable you to experimentally determine the presence of the trans isomer rather than the cis one.

Know more about NMR spectra here:

https://brainly.com/question/14174167

#SPJ11

The following questions will test your knowledge of chemical reactions and the energy involved in them. A student mixes 10 ml of acetic acid and 10 mL of sodium hydroxide in a flask. What kind of reaction is this? (enter only the name of the type of reaction, do not enter the word "reaction" after it). QUESTION 18 A student mixes 10 mL of acetic acid and 10 mL of sodium hydroxide in a fiask. The initial temperature of the acetic acid is 22 C, after the sodium hydroxide is added to the flask, the temperature raises to 26 C. The reaction is exothermic. True False QUESTION 19 If the student uses 50 mL of each chemical instead of 10 ml, would the temperature raise by 20 Cinstead of by 4.07 Yes No

Answers

The type of reaction that occurs when a student mixes 10 mL of acetic acid and 10 mL of sodium hydroxide in a flask is an acid-base neutralization reaction. This type of reaction involves the transfer of protons (H+ ions) from the acid to the base, forming water and a salt as the products.

18)  The initial temperature of the acetic acid is 22 C, and after the sodium hydroxide is added to the flask, the temperature raises to 26 C. This indicates that the reaction is exothermic, meaning that it releases energy in the form of heat. The temperature increase is a result of the energy released during the reaction.

19) The student were to use 50 mL of each chemical instead of 10 mL, it is likely that the temperature would raise by more than 4.07 C. This is because a larger amount of reactants would be present, resulting in a more significant amount of energy being released during the reaction. The exact temperature increase would depend on various factors such as the concentration of the reactants and the specific heat capacity of the flask used. However, it is safe to say that the temperature increase would be greater than what was observed with the 10 mL of each chemical.

In summary, the reaction between acetic acid and sodium hydroxide is an acid-base neutralization reaction. The temperature increase observed in question 18 indicates that the reaction is exothermic. Finally, using a larger amount of reactants in question 19 would likely result in a greater temperature increase than what was observed with 10 mL of each chemical.

To know more about reaction, refer

https://brainly.com/question/25769000

#SPJ11

Explain how the differences in valence electrons between metals and nonmetals lead to differences in charge and the giving or taking of electrons, ion formation

Answers

The differences in valence electrons between metals and nonmetals play a crucial role in determining the charge and the giving or taking of electrons during ion formation.

Valence electrons are the outermost electrons in an atom that participate in chemical reactions. Metals typically have few valence electrons, while nonmetals tend to have more valence electrons. This disparity in electron configuration creates an imbalance in electron distribution between the two groups. Metals, which have fewer valence electrons, tend to lose these electrons to achieve a stable electron configuration similar to the nearest noble gas. By losing valence electrons, metals form positively charged ions known as cations. The loss of electrons creates a deficiency of negative charges, resulting in a net positive charge on the ion. Nonmetals, on the other hand, have a greater affinity for electrons due to their higher valence electron count. They tend to gain electrons from other atoms to achieve a stable electron configuration resembling the nearest noble gas. By gaining electrons, nonmetals form negatively charged ions called anions. The addition of electrons results in an excess of negative charges, leading to a net negative charge on the ion. The transfer of electrons between metals and nonmetals during ion formation is driven by the desire to achieve a more stable electron configuration. The electrostatic attraction between the oppositely charged ions (cations and anions) results in the formation of ionic compounds. In summary, the differences in valence electrons between metals and nonmetals dictate the charge and the giving or taking of electrons during ion formation. Metals lose electrons to form positive cations, while nonmetals gain electrons to form negative anions. This transfer of electrons enables the formation of ionic compounds and helps achieve a more stable electron configuration for both metal and nonmetal atoms.

Learn more about Valence electrons here:

https://brainly.com/question/31264554

#SPJ11

Arrange the following in order of decreasing strength as reducing agents in acidic solution Zn, I

, Sn
2
+
, H
2
O
2
, Al.
Rank from strongest to weakest. To rank items as equivalent, overlap them.
I

, Sn
2
+
, Al, H
2
O
2
, Zn.

Answers

The order of decreasing strength as reducing agents in an acidic solution, from strongest to weakest, is as follows: I−, Sn2+, Al, H2O2, Zn.

What is the order of decreasing strength as reducing agents?

Iodide ion (I−) is the strongest reducing agent in this group. It readily donates electrons and undergoes reduction reactions. Sn2+ follows I− in terms of strength as it has a moderate reduction potential and can effectively act as a reducing agent in acidic solutions.

Aluminum (Al) has a relatively lower reduction potential compared to I− and Sn2+ but is still capable of reducing other species. H2O2, or hydrogen peroxide, is weaker as a reducing agent than Al due to its higher reduction potential. Lastly, Zn is the weakest reducing agent among the given options.

To learn more about reducing agents, visit

brainly.com/question/2890416

#SPJ11

8. Given the general formula for PVA: (C,H,O₂). what do you think the subscript "n" represents?

Answers

The full form of PVA is polyvinyl alcohol. It is a man-made or synthetic polymer and it consists of alcohol and vinyl groups. The presence of alcohol group in it makes it highly flammable.

The monomeric unit of PVA is vinyl acetate. It indicates that it is formed by the polymerization of vinyl acetate. The general formula of polyvinyl alcohol is [CH₂CH(OH)ₙ]. It is a water soluble synthetic polymer.

The subscripts are defined as the numbers which appear in front of the chemical formulas and it indicate the number of atoms of each element present. If no subscript means, only one atom of that element is present.

To know more about polyvinyl alcohol, visit;

https://brainly.com/question/4127030

#SPJ1

Draw a disulfide bridge between two cysteines in a polypeptide chain. Draw the side groups and the a-carbon for the cysteines. Use "Rl" to represent all other non-H atoms attached to the a-carbons. The R group tool is located in the charges and lone pairs drop-down menu .You do not have to consider stereochemistry.

Answers

A disulfide bridge is formed between two cysteines in a polypeptide chain.

Cysteine is an amino acid that contains a thiol (-SH) group on its side chain. When two cysteine residues are close to each other, the thiol groups can react with each other to form a covalent bond, resulting in a disulfide bridge. The formation of disulfide bridges is important for stabilizing the three-dimensional structure of proteins. In the disulfide bridge, the sulfur atoms of the two cysteine residues are covalently bonded to each other, and the two amino acid residues are held together by this bond. The rest of the side chains and a-carbons are represented by "Rl".

learn more about cysteines here

https://brainly.com/question/31674455

#SPJ11

The diagram of the disulfide bridge between two cysteines in a polypeptide chain is shown in the image attached to this answer.

What is a disulfide bridge between cystines?

An amino acid called cysteine has a thiol (-SH) group attached to its side chain. The thiol groups can react with one another to form a covalent bond, which can result in a disulfide bridge, when two cysteine residues are adjacent to one another.

Disulfide bridge generation is crucial for maintaining the three-dimensional structure of proteins. The two cysteine residues are bound together by a covalent bond formed by the sulfur atoms of the two cysteine residues in the disulfide bridge.

Learn more about cystines:https://brainly.com/question/31839509

#SPJ1

Three cations, Ni2 + , Cu2 + , and Ag+, are separated using two different precipitating agents. Based on Figure 17.23, what two precipitating agents could be used? Using these agents, indicate which of the cations is A, which is B, and which is C.

Answers

The two precipitating agents are HCl and NaOH.

The two precipitating agents that could be used to separate Ni2+, Cu2+, and Ag+ are HCl and NaOH. Using HCl, Ag+ would precipitate out as AgCl while Ni2+ and Cu2+ remain in solution. Then, adding NaOH would cause Cu2+ to precipitate out as Cu(OH)2 while Ni2+ remains in solution. Therefore, Ag+ is cation A, Cu2+ is cation B, and Ni2+ is cation C.

It is important to note that the separation of cations using precipitating agents is based on the solubility rules of the corresponding salts. In this case, AgCl is insoluble in water and HCl while Cu(OH)2 is insoluble in water and NaOH. Meanwhile, Ni(OH)2 is slightly soluble in water and NaOH, allowing it to remain in solution even after the addition of NaOH.

Know more about Precipitating Agent here:

https://brainly.com/question/30216519

#SPJ11

true/false. the frequency the concentration level of a high-level disinfectant must be tested.

Answers

The frequency the concentration level of a high-level disinfectant must be tested. This statement is false.

The concentration level of a high-level disinfectant must be tested periodically to ensure its effectiveness. High-level disinfectants are used to kill or inactivate a wide range of microorganisms, including bacteria, viruses, and fungi. To ensure that the disinfectant is working as intended, it is necessary to monitor its concentration regularly. The frequency of testing the concentration level of a high-level disinfectant may vary depending on factors such as the specific disinfectant used, the frequency of use, and the manufacturer’s guidelines. Generally, it is recommended to test the concentration level at regular intervals, such as daily, weekly, or monthly, depending on the circumstances.

By regularly testing the concentration level, healthcare facilities, laboratories, or any other settings that use high-level disinfectants can ensure that the disinfectant is maintained at the appropriate concentration for effective disinfection. This helps to mitigate the risk of microbial contamination and maintain a safe and hygienic environment.

Learn more about High-level disinfectants here:

https://brainly.com/question/31918695

#SPJ11

Using any data you can find in the ALEKS Data resource, calculate the equilibrium constant K at 25.0°C for the following reaction. N2(g)+ O2(g)→ 2NO(g) Round your answer to 2 significant digits.

Answers



The equilibrium constant K for the given reaction N2(g) + O2(g) → 2NO(g) at 25.0°C can be calculated using the equation:

K = ([NO]^2)/([N2][O2])

where [NO], [N2], and [O2] represent the molar concentrations of NO, N2, and O2 at equilibrium, respectively.

According to the ALEKS Data resource, the molar concentration of N2 in air at 25.0°C is approximately 0.78 mol/L, and the molar concentration of O2 is approximately 0.21 mol/L.

Assuming that all of the N2 and O2 react to form NO, the initial molar concentration of NO would be zero, and its equilibrium concentration would be twice that of N2 and O2, or approximately 1.56 mol/L.

Substituting these values into the equation for K gives:

K = ([1.56]^2)/([0.78][0.21]) = 23.8

Rounding the answer to 2 significant digits gives the final answer:

K = 24.

learn more about equilibrium constant

https://brainly.com/question/3159758

#SPJ11

Adrien arrives to lend his friend a fresh battery so the electronic device will turn on. This battery has enough energy to do 10,000 joules of work. Since work can be done by the battery, the expected sign for the voltage is ______ and this best represents ________.

Answers

Adrien arrives to lend his friend a fresh battery so the electronic device will turn on. This battery has enough energy to do 10,000 joules of work. Since work can be done by the battery, the expected sign for the voltage is positive and this best represents function.

When Adrien arrives to lend his friend a fresh battery, the battery has enough energy to do 10,000 joules of work. Since the battery is providing energy, the expected sign for the voltage is positive. This best represents a source of electrical energy, as it's supplying energy to the electronic device for it to function.

The expected sign for the voltage is positive and this best represents the direction of the flow of electric charge. When a battery is supplying energy to an electronic device, the voltage is positive, indicating that there is a flow of electric charge from the positive terminal to the negative terminal of the battery. This flow of electric charge is what enables the battery to do work and power the electronic device.

For more such questions on battery , Visit:

https://brainly.com/question/26466203

#SPJ11


The expected sign for the voltage is positive (+), and this best represents a source of electrical energy.

When a battery or any other source provides energy to a circuit, the voltage is positive. This means that the battery is supplying energy and driving the current flow in the circuit. The positive voltage indicates the potential difference created by the battery, which allows electrons to flow from the negative terminal to the positive terminal. Therefore, a positive voltage represents a source of electrical energy, such as a battery providing power to a device.

To know more about electrical potential energy click here:

https://brainly.com/question/14306881

#SPJ11

approximately how long will it take for atmospheric co2 concentrations to return to preindustrial levels after we stop emitting carbon (without geoengineering)?

Answers

It is estimated that it would take between 50 to 200 years for atmospheric [tex]CO_2[/tex] concentrations to return to preindustrial levels after we stop emitting carbon without geoengineering.

What is atmospheric ?

Atmospheric refers to the gaseous layer of the Earth's environment that encircles the planet and supports life. It is composed of a mixture of nitrogen (78%), oxygen (21%) and small amounts of other gases such as carbon dioxide (0.04%). The atmosphere is an essential component of Earth's environment, providing a protective layer that shields us from the sun's harmful radiation and helps to regulate our climate. It also serves as a reservoir for gases that are important to life, such as water vapor and oxygen. The atmosphere is constantly changing, both on a global and local scale.

This is because the ocean absorbs[tex]CO_2[/tex]over time, but only at certain rates. In addition, [tex]CO_2[/tex]released into the atmosphere from land use, such as deforestation, can also contribute to the buildup of atmospheric [tex]CO_2[/tex]. Therefore, it takes considerable time for the ocean and other natural processes to absorb the extra [tex]CO_2[/tex] released from human activities.

To learn more about atmospheric

https://brainly.com/question/23287233

#SPJ4

the solution at the equivalence point therefore is a weak base solution of 2.33×10-2 mol c6h5coo- dissolved in 0.120 l. the ph of this solution is found using the standard weak base procedure.

Answers

The solution at the equivalence point is a weak base solution with a concentration of 0.194 M C6H5COO-. The pH of this solution can be calculated using the standard weak base procedure.

The solution at the equivalence point refers to the point in a titration where the moles of acid and base are equal, resulting in a neutral solution. In this case, the equivalence point corresponds to the complete reaction of 2.33×10-2 mol of C6H5COOH (a weak acid) with 2.33×10-2 mol of NaOH (a strong base) in 0.120 L of solution.

At the equivalence point, the resulting solution is a weak base solution since all of the C6H5COOH has been converted to its conjugate base, C6H5COO-. The concentration of C6H5COO- in the solution is 2.33×10-2 mol/0.120 L = 0.194 M.

To find the pH of this weak base solution, the standard weak base procedure is used. This involves setting up an equilibrium expression for the reaction of the weak base (C_6H_5COO^-) with water, and solving for the concentration of hydroxide ions (OH-) in the solution using the Kb value for the weak base.

The pOH can then be found using the concentration of OH-, and the pH can be calculated using the relationship p_H + p_{OH} = 14.

Overall, the solution at the equivalence point is a weak base solution with a concentration of 0.194 M C6H5COO-. The pH of this solution can be calculated using the standard weak base procedure.

To know more about equivalence point refer here:

https://brainly.com/question/31375551#

#SPJ11

Suppose 316.0 g of aluminium sulphide reacts with 493.0 g of water, what mass of the excess reactant will remain?Given reaction: Al2S3+6H2O→2Al(OH)3+3H2SA. 265.14 gB. 108.52 gC.400 gD. 66.25 g

Answers

265.14 g of excess reactant will remain when 316.0 g of Aluminium Sulphide reacts with 493.0 g of water. Hence, the correct option is A.

The balanced chemical reaction is given as,

"Al₂S₃ + 6 H₂O → 2 Al(OH)₃ + 3 H₂S"

Total number of Moles of Al₂S₃ = 316/150 =2.11 moles

Total number of Moles of water = 493/18 = 27.39 moles

It can be seen that, 1 mole of Al₂S₃ reacts with 6 moles of water. Therefore, 2.11 moles of  Al₂S₃ reacts with 6/1 × 2.11 = 12.66 moles of water

Hence, Al₂S₃ is the limiting reagent.

Total mass of excess reagent left = (27.39 − 12.66) mole × 18 g/mole

Mass of excess reagent left = 265.14 g

Hence, the correct option is A.

Learn more about mass from the link given below.

https://brainly.com/question/19694949

#SPJ4

An empty beaker was found to have a mass of 50. 49 grams. A hydrate of sodium carbonate was added to the beaker. When the beaker and hydrate was weighed again, the new mass was 62. 29 grams. The beaker and the hydrated compound were heated and cooled several times to remove all of the water. The beaker and the anhydrate were then weighed and its new mass was determined to be 59. 29 grams.

Answers

Based on the given information, the mass of the hydrate of sodium carbonate can be calculated by subtracting the mass of the empty beaker from the mass of the beaker and hydrated compound. The mass of the anhydrate can then be determined by subtracting the mass of the beaker from the mass of the beaker and anhydrate. The difference in mass between the hydrate and the anhydrate corresponds to the mass of water that was removed during the heating and cooling process.

To find the mass of the hydrate of sodium carbonate, we subtract the mass of the empty beaker (50.49 grams) from the mass of the beaker and hydrated compound (62.29 grams): 62.29 g - 50.49 g = 11.80 grams. Therefore, the mass of the hydrate of sodium carbonate is 11.80 grams.

Next, to find the mass of the anhydrate, we subtract the mass of the empty beaker (50.49 grams) from the mass of the beaker and anhydrate (59.29 grams): 59.29 g - 50.49 g = 8.80 grams. Therefore, the mass of the anhydrate is 8.80 grams.

The difference in mass between the hydrate and the anhydrate is the mass of water that was present in the hydrate. Subtracting the mass of the anhydrate (8.80 grams) from the mass of the hydrate (11.80 grams), we find that the mass of water lost during the heating and cooling process is 3 grams.

To learn more about Hydrate - brainly.com/question/14027291

#SPJ11

An empty steel container is filled with 0.500 atm of A and 0.500 atm of B. The system is allowed to reach equilibrium according to the reaction below. If Kp = 340 for this reaction, what is the equilibrium partial pressure of C? atm A (9) + B (9) = C (9)

Answers

To answer this question, we need to use the equilibrium constant expression and the partial pressure of A and B to determine the equilibrium partial pressure of C. The equilibrium constant expression for the given reaction is Kp = PC/PA^9 * PB^9, where PC, PA, and PB are the partial pressures of C, A, and B, respectively.

Since the initial pressure of both A and B is 0.500 atm, we can assume that their partial pressures at equilibrium are also 0.500 atm. Let's call the equilibrium partial pressure of C as PC'. Using the equilibrium constant expression and the given value of Kp (340), we can write:
340 = PC'/0.500^9 * 0.500^9
Simplifying the above equation, we get:
PC' = 340 * 0.500^9
PC' = 0.0657 atm

Therefore, the equilibrium partial pressure of C is 0.0657 atm. It is important to note that the units of Kp and partial pressures should be the same (in this case, atm) for the above equation to work.

To know more about equilibrium constant visit:

https://brainly.com/question/28559466

#SPJ11

Identify of chemical species gets oxidized and which gets reduced in the following overall chemical reaction: 2 Ca(s) + O2(g) → 2CaO(s) ____is oxidized, whereas ___is reduced.

Answers

In the given chemical reaction, calcium (Ca) is oxidized, whereas oxygen (O2) is reduced. This is because oxidation involves the loss of electrons, while reduction involves the gain of electrons.

In the reaction, each calcium atom loses two electrons to form Ca2+ ions, while each oxygen molecule gains two electrons to form O2- ions. The oxidation state of calcium increases from 0 to +2, indicating that it has lost electrons and been oxidized. Conversely, the oxidation state of oxygen decreases from 0 to -2, indicating that it has gained electrons and been reduced.
The formation of CaO(s) from Ca(s) and O2(g) is an example of a redox reaction, where reduction and oxidation occur simultaneously. Calcium acts as the reducing agent, as it causes oxygen to be reduced by donating electrons, while oxygen acts as the oxidizing agent, as it causes calcium to be oxidized by accepting electrons.
In summary, in the reaction 2 Ca(s) + O2(g) → 2CaO(s), calcium is oxidized, and oxygen is reduced.

To learn more about redox reaction, refer:-

https://brainly.com/question/28300253

#SPJ11

: 1. Categorize each statement as true or false. Buffers are effective at resisting pH changes when large amounts of acid or base are added to a solution :: Chemical buffers are important to industrial production and to living systems. :: Chemical buffers have specific ranges and capacities. The buffer capacity is the pH range that is maintained when acids and bases are added to a solution True False 1 1

Answers

1. True: Buffers are effective at resisting pH changes when large amounts of acid or base are added to a solution.
2. True: Chemical buffers are important to industrial production and to living systems.
3. True: Chemical buffers have specific ranges and capacities. The buffer capacity is the pH range that is maintained when acids and bases are added to a solution.


learn more about buffer capacity https://brainly.in/question/8666851?referrer=searchResults


#SPJ11

mass of hydrogen requirement of a fuel cell in running a 30 a current gadget for 30 hour is [molar mass of hydrogen=2.01; n=2.0 and f=96500]

Answers

The mass of hydrogen required for a fuel cell to run a 30 A current gadget for 30 hours is 0.594 g.

To calculate the mass of hydrogen required for a fuel cell to run a 30 A current gadget for 30 hours, we need to use the following formula:
Mass of hydrogen = (Current x Time x n x Molar mass of hydrogen) / (2 x f)
Here, Current = 30 A, Time = 30 hours, n = 2.0 (since each hydrogen molecule produces two electrons), Molar mass of hydrogen = 2.01 g/mol, and f = 96500 C/mol (Faraday's constant).
Substituting these values in the formula, we get:
Mass of hydrogen = (30 x 30 x 2 x 2.01) / (2 x 96500)
                 = 0.594 g
Therefore, the mass of hydrogen required for a fuel cell to run a 30 A current gadget for 30 hours is 0.594 g.

To know more about hydrogen visit:

https://brainly.com/question/28937951

#SPJ11

PLEASE HELP ITS DUE TMRW!! also show your work too please!

Answers

1. HCl is a strong acid, so the concentration [H3O⁺] in 0.000010 M HCI is 0.000010 M. 2. The [OH-] in 0.000010 M HCI is 1 ×10⁻¹⁰ M.

1. The concentration of H3O⁺ ions is identical to the original concentration of HCl since HCl is a strong acid that totally dissociates in water.

Kw = [H3O⁺][OH-] = 1.0 x 10⁻¹⁴

To Find the [H3O+] in 0.000010 M HCl:

[H3O⁺] = 0.000010 M

2. 1 ×10⁻¹⁰ M

3. 0.001 M

4. 0.0010 M

5. 1 ×10⁻¹¹ M

6. 10⁻⁶ M

7. 1 ×10⁻¹¹ M

8. 0.00005 M

9. 0.00020 M

10.0.00256 M

11. 1.25 × 10⁻¹³ M

Learn more about acid, here:

https://brainly.com/question/9709324

#SPJ1

true or false glargine has a bioactivity of 40 u per milliliter

Answers

True. Glargine has a bioactivity of 40 units per milliliter. Glargine is a long-acting insulin analog that is used to treat diabetes

. It is designed to have a steady and prolonged release, providing a constant basal insulin level for up to 24 hours. Glargine is manufactured as a solution for injection, with a concentration of 100 units per milliliter. This means that each milliliter of the solution contains 100 units of glargine. Therefore, if the bioactivity of glargine is 40 units per milliliter, it means that each milliliter of the solution will have an actual insulin activity of 40 units. It is important to note that the bioactivity of insulin refers to the amount of insulin that is available to exert its physiological effects. This value is different from the concentration of insulin in the solution, which only reflects the amount of insulin molecules in the solution regardless of their activity.

learn more about insulin

https://brainly.com/question/32131042

#SPJ11

draw a stepwise mechanism for the conversion of hex-5-en-1-ol to the cyclic ether a

Answers

To draw a stepwise mechanism for the conversion of hex-5-en-1-ol to the cyclic ether, follow these steps:

1. Begin with hex-5-en-1-ol, which has a double bond between carbons 5 and 6, and a hydroxyl group on carbon 1.

2. Utilize an acid-catalyzed intramolecular SN2 reaction. Introduce a catalytic amount of a strong acid, such as H2SO4, which protonates the hydroxyl group on carbon 1, forming a good leaving group (H2O).

3. The negatively charged oxygen from the hydroxyl group attacks the adjacent carbon 5 of the double bond, which forms a 5-membered cyclic ether and a tertiary carbocation on carbon 6.

4. The positively charged carbon 6 gains a hydrogen atom from the surrounding solvent or acid, regenerating the acid catalyst and restoring neutral charge. Following these steps will give you the cyclic ether product from hex-5-en-1-ol.

About carbon

Carbon is a chemical element with the symbol C and atomic number 6. It is a nonmetal and is tetravalent—its atoms make four electrons available to form covalent chemical bonds. It is in group 14 of the periodic table. Carbon only makes up about 0.025 percent of the Earth's crust.

You can learn more about Carbon at https://brainly.com/question/31019423

#SPJ11

the ph of an acid solution is 5.80. calculate the ka for the monoprotic acid. the initial acid concentration is 0.010 m. ka = × 10

Answers

The Ka for the monoprotic acid is 1.52 x 10^-6.

To calculate the Ka for the monoprotic acid, we need to use the pH of the acid solution and its initial concentration. The Ka represents the acid dissociation constant, which describes the extent to which the acid ionizes in solution.
The pH of the acid solution is 5.80, which indicates that the concentration of H+ ions in solution is 10^-5.80 M. Since the acid is monoprotic, we can assume that the concentration of the conjugate base is equal to the concentration of the acid at equilibrium.
To calculate the Ka, we can use the following equation:
Ka = [H+][A-]/[HA]
Where [H+] is the concentration of H+ ions in solution, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.
We know that [H+] = 10^-5.80 M, and the initial concentration of the acid is 0.010 M. At equilibrium, the concentration of the acid will decrease by x (the extent of dissociation), and the concentration of the conjugate base will increase by x. Therefore, [HA] = 0.010 - x and [A-] = x.
Substituting these values into the Ka equation, we get:
Ka = (10^-5.80 M)(x)/(0.010 - x)
To solve for x, we can use the quadratic formula, since the dissociation of the acid is less than 5% (i.e. x << 0.010). The quadratic equation is:
x^2 + Ka(0.010 - x) - Ka(10^-5.80 M) = 0
Solving this equation, we get:
x = 1.26 x 10^-5 M
Substituting this value of x into the Ka equation, we get:
Ka = (10^-5.80 M)(1.26 x 10^-5 M)/(0.010 - 1.26 x 10^-5 M)
Ka = 1.52 x 10^-6
For more such questions on monoprotic acid

https://brainly.com/question/28556909
#SPJ11

Is CsNO2 ionic or covalent

Answers

CsNO₂ which is known as cesium nitrite, is an ionic compound formed when the metal cesium, which is an alkali metal reacts with NO₂⁻ ion.

What are ionic compounds?

Ionic compounds are compounds composed of positively charged ions and negatively charged ions held together by electrostatic attraction. They are formed through the transfer of electrons from one atom to another, typically between a metal and a nonmetal or between a metal and a polyatomic ion.

In CsNO₂, the cesium cation (Cs⁺) and the nitrite anion (NO₂⁻) are held together by ionic bonds, where the metal donates electrons to the nonmetal or polyatomic ion.

Learn more about ionic compounds at: https://brainly.com/question/2687188

#SPJ1

A single stage spiral wound membrane is used to remove CO2 from a natural gas stream. Feed is supplied at 20 MSCFD, 850 psig and contains 93% CH4 and 7% CO2. The retentate leaves at 835 psig with 2% CO2 and the permeate leaves at 10 psig with 36. 6% CO2. The permeance of CO2 through the membrane is reported to be 5. 5 x 10^-2 ft3(STP)/(ft2·hr·psi). Assuming Patm = 15 psia, find the:

(a) percent recovery of methane in the retentate stream [90. 1%]

(b) area of the membrane, ft2, assuming both a linear and log-mean driving force. How do these two approximations compare to the actual area of 33,295 ft2?

(c) permeance of CH4 ft3(STP)/(ft2·hr·psi) and the selectivity of the membrane, a12. [a12 = 19. 3]

Note: MSCFD = 10^6 ft3(STP)/day

Answers

(a) The percent recovery of methane in the retentate stream is 90.1%.

(b) The actual area of the membrane is 33,295 ft², which is the correct value.

(c) The permeance of CH₄ is not provided in the given information. The selectivity of the membrane (a₁₂) is 19.3.

(a) The percent recovery of methane can be calculated using the formula:

% Recovery = (Flow rate of methane in retentate / Flow rate of methane in feed) * 100

The flow rate of methane in the retentate can be calculated by multiplying the flow rate of the feed (20 MSCFD) by the percentage of methane in the retentate (93%) and subtracting the flow rate of methane in the permeate (which is negligible in this case):

Flow rate of methane in retentate = 20 MSCFD * 93% - negligible

Similarly, the flow rate of methane in the feed can be calculated by multiplying the flow rate of the feed (20 MSCFD) by the percentage of methane in the feed (93%):

Flow rate of methane in feed = 20 MSCFD * 93%

Finally, using the formula above, we can calculate the percent recovery of methane.

(b) The area of the membrane can be calculated using two approximations: linear driving force (LDF) and log-mean driving force (LMDF). However, in this case, the actual area of the membrane is given as 33,295 ft². Therefore, the calculated area using these approximations is not required.

(c) The permeance of CH₄ can be calculated using the formula:

Permeance of CH₄ = Permeance of CO₂ / Selectivity (a₁₂)

However, the permeance of CO₂ is provided as 5.5 x 10⁻² ft³(STP)/(ft²·hr·psi), but the permeance of CH₄ is not given. The selectivity of the membrane (a₁₂) is provided as 19.3.

To learn more about permeance, here

https://brainly.com/question/32298644

#SPJ4

Choose an indicator that could be used to determine an endpoint during an acid-base titration for the least acidic proton (pKa2) of Chromic Acid (H2CrO4). Explain why this indicator is appropriate. (Lists of acid base indicators and their relevant properties occur in most general and analytical chemistry text books).

Answers

The appropriate indicator for the least acidic proton (pKa2) of Chromic Acid (H₂CrO₄) is Bromothymol Blue, due to its pH range of 6.0-7.6.


During an acid-base titration, the goal is to determine the endpoint when the acid and base have reacted stoichiometrically. Indicators are used to visually observe this endpoint by changing color based on the pH. The least acidic proton (pKa2) of Chromic Acid (H₂CrO₄) refers to the second dissociation, which occurs at a higher pH range.

Bromothymol Blue is a suitable indicator for this purpose because its pH transition range (6.0-7.6) corresponds well with the pH at the endpoint of the second dissociation. It changes color from yellow to blue as the solution becomes more basic, allowing the observer to accurately determine the endpoint of the titration.

Learn more about indicator here:

https://brainly.com/question/13748767

#SPJ11

when a 0.097m aqueous solution of a certain acid is prepared, the acid is 0.65 issociated. calculate the acid dissociation constant ka of the acid. round your answer to 2 significant digits.

Answers

The acid dissociation constant Ka for this acid is 0.12 M (rounded to two significant digits).

How to write the chemical equation for the dissociation of the acid in water?

The first step in solving this problem is to write the chemical equation for the dissociation of the acid in water:

HA (acid) + H2O ⇌ H3O+ + A- (conjugate base)

The equilibrium constant for this reaction is the acid dissociation constant, Ka:

Ka = [H3O+][A-] / [HA]

We are given the concentration of the acid solution (0.097 M) and the degree of dissociation (α = 0.65). We can use these values to determine the concentrations of the various species at equilibrium:

[HA] = (1 - α) [HA]0 = (1 - 0.65) (0.097 M) = 0.034 M

[H3O+] = [A-] = α [HA]0 = 0.65 (0.097 M) = 0.063 M

Substituting these values into the expression for Ka, we get:

Ka = (0.063 M)2 / (0.034 M) = 0.116 M

Therefore, the acid dissociation constant Ka for this acid is 0.12 M (rounded to two significant digits).

Learn more about acid dissociation constant

brainly.com/question/31386094

#SPJ11

which types of processes are likely when the neutron-to-proton ratio in a nucleus is too large? i. α decay ii. β⁻ decay iii. positron production iv. electron capture

Answers

When the neutron-to-proton ratio in a nucleus is too large, the likely processes that can occur are II- β⁻ decay and iv-electron capture.

In β⁻ decay, a neutron in the nucleus is converted into a proton, and an electron and an electron antineutrino are emitted. This process helps reduce the neutron-to-proton ratio and bring it closer to stability.

Electron capture, on the other hand, involves the capture of an electron from the inner atomic shell by a proton in the nucleus. This results in the conversion of a proton into a neutron and the emission of a neutrino. Electron capture also helps decrease the neutron-to-proton ratio in the nucleus.

α decay is not likely to occur when the neutron-to-proton ratio is too large because it involves the emission of an α particle, which consists of two protons and two neutrons. Positron production is also less likely as it involves the conversion of a proton into a neutron, which would increase the neutron-to-proton ratio.

Therefore, the processes likely to occur when the neutron-to-proton ratio in a nucleus is too large are ii - β⁻ decay and iv- electron capture.

You can learn more about neutron-to-proton ratio  at

https://brainly.com/question/3303145

#SPJ11

Can someone answer this question really quick
Where do igneous rocks form?

Select all that apply.

Responses

A. Igneous rocks form on Earth’s surface where magma reaches the surface.Igneous rocks form on Earth’s surface where magma reaches the surface.

B. Igneous rocks form underneath Earth’s surface where magma cools down within the crust.Igneous rocks form underneath Earth’s surface where magma cools down within the crust.

C. Igneous rocks form within Earth’s mantle where magma is typically found.Igneous rocks form within Earth’s mantle where magma is typically found.

D. Igneous rocks form in Earth’s inner core where magma solidifies under heat and pressure.

Answers

The correct responses for where igneous rocks form are B. Igneous rocks form underneath Earth’s surface where magma cools down within the crust, and C.Option b is correct.

Igneous rocks form within Earth’s mantle where magma is typically found.Option A, "Igneous rocks form on Earth’s surface where magma reaches the surface," is incorrect. Rocks formed from magma that reaches the surface are called extrusive or volcanic igneous rocks.

Option D, "Igneous rocks form in Earth’s inner core where magma solidifies under heat and pressure," is also incorrect. The Earth's inner core is composed mainly of solid iron and nickel, and it is not the location where igneous rocks form.

Igneous rocks are formed when molten magma cools and solidifies. This process primarily occurs within the Earth's crust and mantle. Intrusive or plutonic igneous rocks are formed when magma cools slowly beneath the Earth's surface, while extrusive or volcanic igneous rocks are formed when magma reaches the surface and cools quickly.Option b is correct.

For more such questions on igneous rocks

https://brainly.com/question/30429809

#SPJ11

Rank each of the bonds identified in order of increasing wavenumber: Hint : Stronger bonds (triple bonds > double bonds single bonds) vibrate at higher frequencies:

Answers

The order of increasing wavenumber for the bonds is: single bonds < double bonds < triple bonds. This reflects the relative strengths of the bonds, with triple bonds being the strongest and single bonds being the weakest.

The wavenumber of a bond in a molecule is directly proportional to the frequency of its vibration. Stronger bonds vibrate at higher frequencies, and weaker bonds vibrate at lower frequencies.

Using this information, we can rank the bonds identified in order of increasing wavenumber as follows:

1. Single bonds: These bonds are the weakest and vibrate at the lowest frequency, so they have the lowest wavenumber.

2. Double bonds: These bonds are stronger than single bonds and vibrate at a higher frequency, so they have a higher wavenumber.

3. Triple bonds: These bonds are the strongest and vibrate at the highest frequency, so they have the highest wavenumber.

Therefore, the order of increasing wavenumber for the bonds is single bonds < double bonds < triple bonds. This order reflects the relative strengths of the bonds, with triple bonds being the strongest and single bonds being the weakest.

To know more about wavenumber refer here:

https://brainly.com/question/31452434#

#SPJ11

Other Questions
let x = (1, 2, 3)t , y = (y1, y2, y3) t , z = (4, 2, 1)t . compute 2x, 3y, x 2y 3z. characters in c/c are only 8 bits and therefore can address anywhere. group of answer choices true false The current model that most organizations typically use for dealing with fraud is: fraud incident, investigation, action, resolution. The last step of the fraud fighting model is follow-up. A researcher was interested in examining the different levels of aggression shown by college students and prisoners with life sentences. Aggression was measured by surveys given during one session. Which analysis should the researcher perform on the mean aggression scores of the groups? Select one: a. related means t test b. independent means t test C. correlation d. regression expectancy theory focuses on our perceptions of how fairly we feel we're being treated relative to others. true or false at the closing, the real estate brokers commission generally appears as a (e) add to the current model the interaction between gestational age and sex. does gestational age have a different effect on systolic blood pressure depending on the gender of the infant? brent loses his job at the public swimming pool when the pool closes for the winter. this is an example of A current of 4.75 A is going through a 5.5 mH inductor is switched off. It takes 8.47 ms for the current to stop flowing.> What is the magnitude of the average induced emf, in volts, opposing the decrease of the current? q-sort refers to a method of personality assessment in which the subject typically: using the thermodynamic information in the aleks data tab, calculate the boiling point of ethanol c2h5oh. round your answer to the nearest degree. c Which exercise would be BEST suited for an advanced athlete? Antioxidants. Which expression for the area of the poster is written as the sum of the areas of each color section true/false: at most one catch block may be attached to a single try block. Mark, Sean, and Jackie are members of a software development team. Mark creates the documentation that outlines requirements for the development of new software. Sean creates the system architecture, and builds software applications based on system requirements. Jackie evaluates the new software by running tests to identify bugs and other problems.What is Mark's role on the software development team Selective precipitation Is useful qualilative analysls because the addition 0l a particular reagent can determine whether: Select the correct answer below: particular Ion t5 present In solution 'particular solid Is present the solution 'sarurated the solution unsaturated Use the data in the table below to calculate the standard cell potential for each of the following reactions:(a) NO3-(aq) + 4H+(aq) + 3Fe2+(aq) 3Fe3+(aq) + NO(g) + 2H2O(b) Br2(aq) + 2Cl-(aq) Cl2(g) + 2Br-(aq)(c) Au3+(aq) + 3Ag(s) Au(s) + 3Ag+(aq) Part of the population of 5,250 elk at a wildlife preserve is infected with a parasite. A random sample of 50 elk shows that 8 of them are infected. How many elk are likely to be infected? Based on the sample, there will likely be infected elk in the wildlife preserve. Which of the following nursing home options would BEST suit an individual who needs some nursing care and supervision but NOT full-time care?Custodial care homesAssisted living facilitiesSkilled nursing facilitiesCongregate housing If AE= 5, BC = 14 and BD =6, what is. the perimeter of Triangle ABC?