The question is incomplete, the complete question is;
. A chemist determined by measurements that 0.015 moles of hydrogen chloride participate in a chemical reaction. Calculate the mass of hydrogen chloride that participates Round your answer to 2 significant digits. x S. ?
Answer:
0.54 g
Explanation:
Recall that;
Number of moles = mass/molar mass
Molar mass of HCl =36.5 g/mol
Mass= number of moles × molar mass
Mass= 0.015 moles × 36 g/mol
Mass= 0.54 g
20.1 cm3 of metal hydroxide (MOH) containing 4.8 g/dm3 react Completely with 23.0 cm3 of the HCL and Containing 3.8g/dm3. Identify the metal of M of MOH
Answer:
A metal M readily forms water-soluble sulphate MSO4, water-insoluble hydroxide M(OH)2 and oxide MO. The oxide and hydroxide are soluble in NaOH. The M is:
Consider the balanced chemical equation below.
2 A ⟶ C + 4 D
How many moles of D would be produced if 6 moles of A were used?
Explanation:
[tex]here \: is \: your \: explanation : - \\ \\ given \: balanced \:equation \: = > \\ \\ 2 A=>C \: + \: 4D \\ \\ by \: this \: equation \: we \: get \: \\ \\ 2 \: moles \: of \: A \: produce \: 4 \: moles \: \\ \\ of \: D \\ \\ hence \: . \: 1 \: mole \: can \: produce \: = 4 \div 2 \\ \\ = > 2 \: moles \: \\ \\ so \: if \: 6 \: moles \: of \: A \: used \: then \: \\ \\ amount \: of \: D \: produced \: = (6 \times 2) \\ \\ = > 12 \: moles \: of \: D \\ \\ \mathcal\blue{ Hope \: it \: helps \: you \: (. ❛ ᴗ ❛.) }[/tex]
You’re taking a walk on a warm fall morning. The temperature is about 70 degrees Fahrenheit, and you cannot see a cloud anywhere in the sky. You notice that the ground has no dew on it either. This means the
this means that you are wearing warm clothes in warm temperature .quite easy sir
By how many times would you expect Al2(SO4)3 to depress the F.P of water compared to sucrose C12H22011 ?
Answer:
By how many times would you expect Al2(SO4)3 to depress the F.P of water compared to sucrose C12H22011 ?.
Explanation:
The freezing point of a pure solvent decreases further by adding a nonvolatile solute.
This is called depression in freezing point.
When an ionic solute is dissolved then the depression in the freezing point is proportional to the number of ions present in the solution.
In aluminum sulfate, there are five ions formed as shown below:
[tex]Al_2(SO_4)_3(aq)->2Al^3^+(aq)+3SO_4^2^-(aq)[/tex]
But sucrose is a covalent compound and it does not undergo dissociation.
Hence, aluminum sulfate decreases the freezing point of water by five times compared to sucrose.
Explanation:
22 Agas that is collected by upward delivery is likely to be A heavier than air B insoluble in water C lighter than air D Soluble in water
Answer:
joib
Explanation:
Design an experiment to demonstrate phototropism.
Answer:
Object: To demonstrate phototropism
equipments: A black box, window with light source, a well watered potted plant.
Experiment: A wellwatered potted plant is placed inside a darkened black box that is having a small window on one side. This is called as phototropic chamber. Window is remain closed for a day the plant shows normal growth.
Whereas if window is opened atwo days it will be found that shoot tip bends and grows towards light proving that it is positively phototropic.
What is the product of the following reaction? K OC(CH3)3
Answer:
See explanation and image attached
Explanation:
The reaction is an E2 reaction. It is a synchronous reaction.
The base KOC(CH3)3 abstracts a proton as the bromide ion leaves in a single step.
This yields the product as shown in the image attached.
Describe how you would prepare your assigned ester from a carboxylic acid and an alcohol. You do not need to include a detailed procedure, but you should include any necessary reagents or catalyst (solvents are not needed).
Answer:
The general preparation of esters( for example ethyl ethanoate) is through a process known as ESTERIFICATION.
Explanation:
The formation of an ester by the reaction between an alkanol and an acid is known as esterification. This reaction is extremely slow and reversible at room temperature, and is catalyzed by a high concentration of hydrogen ions.
In the preparation of one of the simpler esters known as ETHYL ETHANOATE the reactants include ethanol(an alcohol) and glacial ethanoic acid(a carboxylic acid) in the presence of concentrated tetraoxosulphate VI acid as a CATALYST. Note that, a catalyst is any substance that is able to increase the rate of a chemical reaction.
The mixture is warmed in a water bath( hot but not boiling) for about 25 minutes. The mixture is poured into a beaker partially filled with a sodium or calcium chloride to remove interacted ethanol. The ethyl ETHANOATE floats on the mixture as oily globules.
Voltages listed in textbooks and handbooks are given as standard cell potentials (voltages). What is meant by a standard cell?
Answer:
Find the definition below.
Explanation:
A standard cell is a group of transistors that have a regular electromotive force flowing through them. They follow either the boolean function or the storage function. A technology library that is made up of a collection of standard cells can be used to facilitate the placement, routing, and synthesis of the Application-specific Integrated Circuit (ASIC).
Electronic Design Automation is an example of an apparatus that implements this functionality.
A mixture is -
A. a pure substance made through chemical processes
B. a pure substance made through physical processes
C.
an impure substance made through chemical processes
D.
an impure substance made through physical processes
Answer:
C
Explanation:
an impure substance made through chemical process
Aluminum hydroxide, with heat, creates____
Answer:
Water and Aluminium oxide
Explanation:
Have a nice day.
What happens in a flame test?
A. Electrons are excited to higher energy levels and their emissions
are observed.
B. Impurities in a sample are burned off in the flame until a pure
sample remains
C. Electrons are ejected from atoms when a sample is burned in the
flame.
D. A sample is melted in a flame to determine how much energy was
In a flame test electrons are excited to higher energy levels and their emissions are observed. Therefore, option A is correct.
What is flame test ?The flame test is used to visually identify the identity of an unknown metal or metalloid ion based on the properties color the salt turns in the flame of a bunsen burner.
The color of light emitted depends on the energy emitted by an electron returning to its original state.
The flame's heat converts metal ions into atoms, which become excited and emit visible light. In a flame test electrons are excited to higher energy levels and their emissions are observed.
Thus, option A is correct.
To learn more about the flame test, follow the link;
https://brainly.com/question/6357832
#SPJ1
How many moles are in the number of molecules below? I only need to know the 5th question.
Answer:
11
1. 6.02×10 23
this is the answer Hope it helps you
Explain why caffeine can be extracted from the tea leaves into hot water and how you extracted the aqueous solution and isolated the crude caffeine.
Answer:
The hot water dissolves the flavor and color components.
Explanation:
Caffeine can be extracted from the tea leaves into hot water because the hot water dissolves the flavor and color components away from the solid vegetable. This is an example of a solid-liquid extraction. We can extracted the aqueous solution and isolated the crude caffeine by converting the components of caffeine into their calcium salts which are insoluble in water. Then the caffeine can be extracted from the water by using methylene chloride.
g 0.500 L of a solution with a concentration of 0.25 M is needed. To prepare this solution, a stock solution with a concentration of 1.25 M is prepared. What volume of the stock solution is needed to create the desired solution
Answer:
0.1 L
Explanation:
From the question given above, the following data were obtained:
Concentration of stock solution (C₁) = 1.25 M
Volume of diluted solution (V₂) = 0.5 L
Concentration of diluted solution (C₂) = 0.25 M
Volume of stock solution needed solution (V₁) =?
The volume of the stock solution needed can be obtained as follow:
C₁V₁ = C₂V₂
1.25 × V₁ = 0.25 × 0.5
1.25 × V₁ = 0.125
Divide both side by 1.25
V₁ = 0.125 / 1.25
V₁ = 0.1 L
Therefore, the volume of the stock solution needed is 0.1 L
a 150 j of energy is added to a system that does 50 j of work is done.by how m uch will tyhe internal energy of system be raised?
The internal energy of system is raised by 3 times
A reaction produces 3.0 mol of gas, which occupies 1.46 L. What is the volume of the product when 4.1 mol are produced at constant temperature and pressure?
Answer:
1.99 L
Explanation:
Given that,
A reaction produces 3.0 mol of gas, which occupies 1.46 L.
We need to find the volume of the product when 4.1 mol are produced at constant temperature and pressure.
We know that,
PV = nRT
i.e.
[tex]V\propto n\\\\\dfrac{V_1}{V_2}=\dfrac{n_1}{n_2}\\\\V_2=\dfrac{V_1n_2}{n_1}\\\\V_2=\dfrac{1.46\times 4.1}{3}\\\\V_2=1.99\ L[/tex]
So, the new volume is 1.99 L.
The balanced equation for the reaction between aqueous ammonium sulfate and aqueous barium acetate is:________.
A. (NH4)2SO4 (aq) + Ba(C2H302)2 (aq) - Baso, (aq) + 2 NH.C2H2O2 (s).
B. (NH4)2SO3 (aq) + Ba(C2H302)2 (aq) - BaSO3(aq) + NH.C2H3O2 (aq).
C. (NH4)2SO4 (aq) + Ba(C2H302)2 (aq) - BaSO4(s) + 2 NH C2H2O2 (aq).
D. (NH4)2SO4 (aq) + Ba(C2H202)2 (aq) - BaSO4(s) + NHC2H2O2 (aq).
E. NH,SO4 (aq) + BaC2H302 (aq) -- BaSO4(s) + NH4C2H2O2 (aq).
Answer:
(NH4)2SO4 (aq) + Ba(C2H302)2 (aq) - BaSO4(s) + 2 NH4C2H3O2 (aq).
Explanation:
In balancing redox reaction equations, the rule of thumb is that the number of atoms on the left hand side of the reaction equation must be equal to the number of atoms of the same element on the left hand side of the reaction equation.
To ensure this, the correct coefficients are written in front of each of the reactants/products and the number of atoms of each element is counted to ensure that the equation is balanced.
If all these procedures are meticulously carried out, the balanced equation for the reaction between aqueous ammonium sulfate and aqueous barium acetate is:
(NH4)2SO4 (aq) + Ba(C2H302)2 (aq) - BaSO4(s) + 2 NH4C2H3O2 (aq).
6ooo kg into quintal
Answer:
60 q
Explanation:
The conversion factor is 100; so 1 quintal = 100 kilograms. In other words, the value in q multiply by 100 to get a value in kg.
Liquid octane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 10.3 g of octane is mixed with 23. g of oxygen. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
9.36 g
Explanation:
The equation of the reaction is;
C8H18(g) + 25/2 O2(g) ----> 8CO2(g) + 9H2O(g)
Number of moles of octane = 10.3g/ 114 g/mol = 0.09 moles
1 mole of octane yields 9 moles of water
0.09 moles of octane yields 0.09 × 9/1 = 0.81 moles of water
Number of moles of oxygen = 23g/32g/mol = 0.72 moles
12.5 moles of oxygen yields 9 moles of water
0.72 moles of oxygen yields 0.72 × 9/12.5 = 0.52 moles of water
Hence oxygen is the limiting reactant;
Maximum mass of water produced = 0.52 moles of water × 18 g/mol = 9.36 g
A sealed vessel initially contains 100 g of chlorine gas and 90 g of hydrogen gas. The two gases undergo reaction to form HCl. Which of the following statements is true?
a. 100 g HCl is produced
b. 190 g HCl is produced
c. less than 90 g HCl is produced
d. between 100 and 190 g of HCl is produced
Answer:
d.
Explanation:
H2 + Cl2 = 2HCL
From the equation 2g hydrogen combine with 71g of chlorine.
So 35.5 g Cl2 combines with 1g of H2
There are 100g of Cl2 so this will, by proportion, react with 100/35.5 g hydrogen.
This is 2.8 g hydrogen so the mass of HCl formed = 102.8 g.
The true statement is that d. between 100 and 190 g of HCl is produced.
How do find the mass of HCL?To find mass of HCL:
H2 + Cl2 = 2HCL
From the equation, 2g of hydrogen combines with 71g of chlorine.
So 35.5 g Cl2 combines with 1g of H2
There are 100g of Cl2 so this will, by proportion, react with 100/35.5 g of hydrogen.
This is 2.8 g hydrogen so the mass of HCl formed = 102.8 g.
Hydrogen chloride may be formed by the direct combination of chlorine (Cl2) gas and hydrogen (H2) gas.
Learn more about Hydrogen chloride here: brainly.com/question/20323511
#SPJ2
Qual número atômico do ferro?
Answer:
The answer is Iron.
Explanation:
I hope this helps you out. Have a nice day!
Which of the following was NOT explained by Dalton's atomic theory?
A. the Law of Multiple Proportions
B. the difference between elements and compounds
C.?the difference between isotopes of an element
D. the Law of Conservation of Mass
Answer:
A. The law of Multiple Proportion
if salt and sand is mixed with distilled water, what will be the residue and what will be the filtrate?
Answer:
salt and sand
Explanation:it is what it is
Which of the following elements is the largest in size
a. O
b. He
c. K
d. H
Answer:
C. K
i took this class before
Answer: The largest element is K
Explanation: As K has the largest radius among O,He and H
What effect does a high carbon level have on a deep ocean
Explanation:
High carbon concentration in the deep ocean means increased absorption of carbon to the atmosphere resulting to even greater and harmful amounts of carbon in the atmosphere. Therefore we need to keep a close eye of the deep ocean in the quest to monitor and pump out excess carbon from this part of marine life.
Pablo, whose mass is 60 kg, is moving along at a velocity of 8 m/s. How much kinetic energy does he have?
Answer:
1920 Joules
Explanation:
* means multiply
^ means exponent
kinetic energy is in Joules or J
kinetic energy = 1/2 * mass * (velocity)^2
kinetic energy = 1/2 * 60 * (8)^2
kinetic energy = 1/2 * 60 * (8*8)
kinetic energy = 1/2 * 60 * (64)
kinetic energy = 1920 Joules or 1920 J
Answer:
KE = 1920 J
General Formulas and Concepts:
Energy
Kinetic Energy Formula: [tex]\displaystyle KE = \frac{1}{2}mv^2[/tex]
m is mass (in kg)v is velocity (in m/s)Explanation:
Step 1: Define
[Given] m = 60 kg
[Given] v = 8 m/s
Step 2: Find KE
Substitute in variables [Kinetic Energy Formula]: [tex]\displaystyle KE = \frac{1}{2}(60 \ kg)(8 \ m/s)^2[/tex]Evaluate: [tex]\displaystyle KE = 1920 \ J[/tex]Topic: AP Physics 1 Algebra-Based
Unit: Energy
A molecule contains hydrogen bonding if it contains hydrogen covalently bonded to Group of answer choices sulfur, oxygen, or fluorine. oxygen or nitrogen. fluorine, oxygen, or nitrogen. nitrogen, fluorine, oxygen, or nitrogen. chlorine, fluorine, or iodine.
Answer: A molecule contains hydrogen bonding if it contains hydrogen covalently bonded to (fluorine, oxygen, or nitrogen)
Explanation:
A hydrogen bond is a strong dipole-dipole attraction which occurs between
--> the hydrogen atom attached to a strongly electronegative atom, and
--> another strongly electronegative atom with a lone pair of electrons.
When an electronegative atom such as fluorine, oxygen or Nitrogen is bonded to hydrogen, a dipole develops causing the hydrogen to be partially negative. The electrostatic attraction between the partially positive hydrogen atom in one molecule and the partially negative atom of the more electronegative element in another molecule gives rise to the strong dipole-dipole attraction called hydrogen bonding.
Hydrogen fluoride, water and ammonia contain the three most electronegative elements, fluorine, oxygen and nitrogen respectively, linked directly to hydrogen. In addition, lone pairs of electrons are present in the fluorine, oxygen and nitrogen atoms of the three hydrides, making hydrogen bonds to form easily between them. These compounds which exhibits hydrogen bonding always have higher melting and boiling points.
Methanoic acid is the simplest carboxylic acid molecule. It has one carbon atom. Draw the structural model for methanoic acid (using C and H).
ANSWER IS ABOVE
THE METHANOIC ACID
2x^2+8x-7 solve the equation
Answer:
x = (-4 + √30) / 2, or x = (-4 – √30) / 2
Explanation:
x = (-b ± √b² – 4ac) / 2a →
y = ax² + bx + c
given
y = 2x² + 8x – 7 →
x = (-(8) ± √(8)² – 4(2)(-7)) / 2(2) →
x = (-8 ± √64 + 56) / 4 →
x = (-8 ± √120) / 4 →
x = (-8 ± 2√30) / 4 →
x = (-4 ± √30) / 2 →
x = (-4 + √30) / 2, or x = (-4 – √30) / 2