The answer to this question is D as it says in the answer sheet of the question paper but how?

Answer:

Elements that have atomic numbers from 20 to 83 are heavy elements, therefore the ratio is different. The ratio is 1.5:1, the reason for this difference is because of the repulsive force between protons: the stronger the repulsion force, the more neutrons are needed to stabilize the nuclei.

Answer:

CH3OH(s)<CH3OH(l)<CH3OH(g)<CH3CH2OH(g)

Explanation:

Entropy is defined as the degree of disorderliness of a system. The more orderly a system is, the more its entropy tends to zero.

Hence solid particles have the least entropy because solid particles do not translate. The entropy of liquid particles is greater than that of solid particles since liquid particles can translate. Gas particles have the highest entropy because gas particles move at a very high velocity owing to minimal intermolecular interaction.

Also, the heavier the molecules of a substance, the larger its molar entropy therefore, CH3CH2OH(g) exhibits the greatest entropy.

A stent is a small mesh tube that holds open passages in the body, such as weak or narrow arteries.

Explanation:

To open an artery near the heart

just took the quiz

Answer:

In the case of an exothermic reaction, the reactants are at a higher energy level as compared to the products, as shown below in the energy diagram. In other words, the products are more stable than the reactants. Overall Δ H ΔH ΔH for the reaction is negative, i.e., energy is released in the form of heat.

Explanation:

Answer:

protons because they have the most positive charge

About 4/5.

Hope this helps.

Answer:  c

Explanation:

Answer:

Weight = 500 Newton

Explanation:

Given the following data;

Acceleration due to gravity = 10N/Kg

Weight can be defined as the force acting on a body or an object as a result of gravity.

Mathematically, the weight of an object is given by the formula;

[tex] Weight = mg [/tex]

Where;

Note: In order to calculate the weight of a mass, it's required that the mass of an object or body is given.

However, in this particular question it was omitted in error and as such i would assume a value.

Substituting into the formula, we have;

[tex] Weight = 50 * 10 [/tex]

Weight = 500 Newton

Answer:

Our energy supply comes mainly from fossil fuels, with nuclear power and renewable sources rounding out the mix.

The energy associated with an object's motion is called kinetic energy. Kinetic energy is the energy of motion. All moving objects have kinetic energy

Explanation:

Answer:

Kinetic energy is the energy of motion. All moving objects have kinetic energy. When an object is in motion, it changes its position by moving in a direction: up, down, forward, or backward. As he winds up and releases the ball, the stored energy is changed into kinetic energy, the energy of motion!So that , energy comes from and how it is affecting change or putting an object in motion.

Explanation:

I ain't flashligh

Answer:

Technically a microorganism or microbe is an organism that is microscopic. The study of microorganisms is called microbiology. Microorganisms can be bacteria, fungi, archaea or protists. The term microorganisms does not include viruses and prions, which are generally classified as non-living.

Answer:

a pure substance consists only of one element or one compound. a mixture consists of two or more different substances, not chemically joined together.

Explanation:

Radhe Radhe❤

Answer:

A pure substance consists of only one element or one compound. Whereas, a mixture consists of two or more different substances which aren't chemically joined together.

1. [tex]\sf \bf {\boxed {\mathbb {Evaporation}}}[/tex] - The changing of liquid to a gas.

2. [tex]\sf \bf {\boxed {\mathbb {Automobile}}}[/tex] - The major source of pollution.

3. [tex]\sf \bf {\boxed {\mathbb {Greenhouse \:effect}}}[/tex] - Carbon dioxide and water vapor trapping heat given off by Earth.

4. [tex]\sf \bf {\boxed {\mathbb {Ozonosphere}}}[/tex] - Layer absorbing ultraviolet rays.

5. [tex]\sf \bf {\boxed {\mathbb {Condensation}}}[/tex] - The changing of a gas to a liquid.

6. [tex]\sf \bf {\boxed {\mathbb {Ionosphere}}}[/tex] - Layer responsible for reflecting radio waves.

7. [tex]\sf \bf {\boxed {\mathbb {Troposphere}}}[/tex] - The layer in which weather changes.

[tex]\large\mathfrak{{\pmb{\underline{\orange{Mystique35 }}{\orange{❦}}}}}[/tex]

Answer:

1. Evaporation :- The changing of a liquid to a gas.

2. Automobile :- The major source of pollution.

3. Greenhouse effect :- Carbon dioxide and water vapour trapping heat gives off by Earth.

4. Ozonosphere :- Layer absorbing ultraviolet rays.

5. Condensation :- The changing of gas to a liquid.

6. Ionosphere :- Layer responsible for reflecting radio waves.

7. Troposphere :- The layer in which weather changes.

Answer:

i) During washing

ii) During Measurement

Explanation:

The two possible steps are :

i) During washing : during the washing method the residue may be not completely dried out and this residue ( water) will add up to the final product ( copper yield ) and this kind of error is called human error.

ii) During measurement : If the weighing instrument is faulty there might be addition  in value of the final copper yield which will see the final yield value > 100% . this error occurs when the initial value and final value is  been weighed

Answer:

The number of moles in 89 grams of KCl is approximately 1.193 moles

Explanation:

A mole of an element or compound, is the quantity of the element or compound that contains 6.022 × 10²³ molecules of the element or compound, such that the molar mass of one mole is dependent on the mass of each molecule of the element or compound that make up the 6.022 × 10²³ particles

The given parameters are;

The mass of the KCl = 89 grams

The Molar mass, MW, of potassium, K = 39.1 g/mole

The Molar mass, MW, of chlorine, Cl = 35.5 g/mole

Therefore, given that KCl, has one K and one Cl, per mole, we have;

The Molar mass, MW, of potassium chloride, KCl = (39.1 + 35.5) g/mole = 74.6 g/mole

[tex]The \ number \ of \ moles, n=\dfrac{Mass}{Molar \ mass, MW}[/tex]

Therefore, the number of moles of KCl in 89 g, 'n' is given as follows;

n = (89 g)/(74.6 g/mole) ≈ 1.193 moles

The number of moles in 89 grams of KCl, n ≈ 1.193 moles.

Answer:

Chemical reaction, a process in which one or more substances, the reactants, are converted to one or more different substances, the products.

A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.

Chemical reactions are an integral part of technology, of culture, and indeed of life itself. Burning fuels, smelting iron, making glass and pottery, brewing beer, and making wine and cheese are among many examples of activities incorporating chemical reactions that have been known and used for thousands of years. Chemical reactions abound in the geology of Earth, in the atmosphere and oceans, and in a vast array of complicated processes that occur in all living systems.

Explanation:

hope it help

plss brainlys me

Answer:

Chemical reaction, a process in which one or more substances, the reactants, are converted to one or more different substances, the products

Explanation:

Substances are either chemical elements or compounds. A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.

Answer:

4084.808 grams (SigFigs: 4085 grams)

Explanation:

The molar mass of Iron fluoride is 112.84 g/mol.

To calculate the mass, multiply the molar mass by the number of moles.

36.2 mol * 112.84 g/mol = 4084.808 g

Convert to Sigfigs (if necessary):

4085 g

Answer:

The person above is correct

Explanation:

Answer:

The new substance will need more energy to form its chemical bonds than the old substance will release. ... More energy will be released from the old substance than the new substance will need to form its chemical bonds.

Explanation:

This is the answer I got. Hope it's really helpful

Answer:

"Which is evidence that a chemical reaction has likely occurred?"

The correct answer would be,

B. the formation of a precipitate

Explanation:

Got it right on my test, have a great day!

Answer:

6,75 kilometres per hour

Answer:

B. The wavelengths of light a molecule gives off when an electron moves to lower energy levels

Answer:

12:35

Try it this way. egst11245

Answer:

A is mixture

B and C are compund

D and E are elements

F is also mixture

Answer:

Answer:

Don't plagiarize here.

Explanation:

Your online teacher knows that you are looking here for the answer!!!!

Acids increase the [tex]H^+[/tex] concentration in solution. Therefore, the correct option is D.

One of their essential characteristics is the ability of all acids to increase the concentration of H+ ions (protons) in a solution. Acids are chemicals that when dissolved in water add protons to the solution. As a result of this proton donation, the amount of [tex]H^+[/tex]ions in the solution increases, thereby lowering the pH. It is important to remember that not all acids contain[tex]H_3O^+[/tex] ions directly; Instead, [tex]H^+[/tex] ions can react with water molecules to generate [tex]H_3O^+[/tex] ions (hydronium ions).

Therefore, the correct option is D.

Learn more about Acids, here:

https://brainly.com/question/29796621

#SPJ2

Explanation:

From the word equation, it shows that when copper oxide reacts with sulphuric acid, a double replacement reaction will occur, where copper and sulphate forms a bond with each other, and so do water.

The reaction of copper oxide with sulphuric acid to form copper sulphate and water can be written as follows: [tex]CuO + H_{2}SO_{4} \rightarrow CuSO_{4} + H_{2}O[/tex]

In a balanced chemical reaction all the reactants will be in a correct stochiometric ratios where, each elements have to be equal in number on both side of the reaction.

The given reaction is an example of double displacement reaction in which two species are displaced. Here, oxygen from copper oxide goes to water and sulphate group from sulphuric acid displace to copper sulphate.

This product of this reaction i.e., copper sulphate have cyan color and this reaction is exothermic.  Thus, the balanced reaction can be written as follows;

[tex]CuO + H_{2}SO_{4} \rightarrow CuSO_{4} + H_{2}O[/tex]

To learn more about double displacement reactions, refer the link below:

https://brainly.com/question/13870042

#SPJ2

Answer:

Mole of NaOH = 0.00308 mole

Explanation:

From the question given above, the following data were obtained:

Volume = 22 mL

Molarity = 0.140 M

Mole of NaOH =?

Next, we shall convert 22 mL to L. This can be obtained as follow:

1000 mL = 1 L

Therefore,

22 mL = 22 mL × 1 L / 1000 mL

22 mL = 0.022 L

Finally, we shall determine the number of mole of NaOH in the solution. This can be obtained as shown below:

Volume = 0.022 L

Molarity = 0.140 M

Mole of NaOH =?

Molarity = mole / Volume

0.140 = Mole of NaOH / 0.022

Cross multiply

Mole of NaOH = 0.140 × 0.022

Mole of NaOH = 0.00308 mole

Thus, 0.00308 mole of NaOH is present in the solution.

Answer: A tick on a deer

Explanation:

because commensalism is a type of symbiotic relationship in which one species benefits, while the other species is neither harmed nor helped

please put brainlest for me if you found this helpful

An example of commensalism is tick on a deer. Therefore, option A is correct.

Another sort of symbiotic interaction is commensalism, in which one organism benefits and the other does not in any way suffer. Golden jackals will pursue tigers as they hunt in order to consume the tigers' leftovers.

The term "commensalism" is derived from the word "commensal," which in human social interaction refers to "eating at the same table," and which itself is derived through French from the Medieval Latin term "commensalis," which refers to "sharing a table," from the prefix com-, which means "together," and mensa, which refers to "table" or "meal."

The simplest definition of commensalism is that it is a form of symbiosis in which one organism gains while the other neither gains nor suffers harm. The three primary forms of commensalism are phoresy, metabiosis, and inquilinism.

Thus, option A is correct.

To learn more about commensalism, follow the link;

https://brainly.com/question/14224704

#SPJ12

Answer: A pattern of same atomic orbitals can be seen about elements in the same period with respect to electron structures.

Explanation:

The horizontal rows in a period table are called periods.

Elements present in the same period will have same atomic orbitals.

For example, electronic distribution of Na is 2, 8, 1 and it is a third period element.

Similarly, electronic distribution of Cl is 2, 8, 7 and it is also a third period element.

Hence, both Na and Cl will have K, L, M shells, that is, they have three atomic orbitals.

Thus, we can conclude that a pattern of same atomic orbitals can be seen about elements in the same period with respect to electron structures.