True. The left operand of Python's in operator is a target substring and the right operand is the string to be searched. For example, if you want to check if the substring 'Python' is present in the string 'I love Python', you would use the expression 'Python' in 'I love Python'.
What is Python's?Python is an interpreted, high-level, general-purpose programming language. It was created by Guido van Rossum and was first released in 1991. It is a powerful language that can be used for a wide variety of tasks, such as web programming, software development, data analysis, artificial intelligence, and game development. Python is an object-oriented programming language that is easy to learn, yet powerful enough to handle complex tasks. It is open source, free to use, and can be used across multiple platforms. Python is a great choice for those looking to quickly learn the basics of programming.
To learn more about complex tasks
https://brainly.com/question/23827135
#SPJ4
An object travels to the right with a speed of 149.5 m/s and then travels left at 164.8 m/s. What is the change in its velocity?
The change in the velocity of the object will be 314.30 meters per second.
What is the relative velocity?The movement of an object in relation to another observer is known as its relative velocity. It is the pace at which one object's relative location changes in relation to another object over time.
An object travels to the right with a speed of 149.5 m/s and then travels left at 164.8 m/s.
Then the velocity of the object is given as,
v = 149.50 - (-164.80)
v = 149.50 + 164.80
v = 314.3 m/s
The change in the velocity of the object will be 314.30 meters per second.
More about the relative velocity link is given below.
https://brainly.com/question/19260269
#SPJ1
the pressure drop needed to force water through a horisontal 1in diameter pipe is 0.5 psi for every 11 ft length of pipe. determine the shear stress on the piupe wall determine the shear stress at distances 0.3 amnd 0.5 in away from the pipe wall
The shear stress at distances 0.3 and 0.5 in away from the pipe wall 0.06 psf For every 12-ft length of pipe, 0.60 psi of pressure drop is required to force water through a horizontal 1-in diameter pipe.
P = 4 L w / D to determine the shearing stress at the wall. So
w = P D / 4L
= (0.6 psi)(144 in2/ft2) (1 in)(1ft/12 in)] / 4(12 ft)
= 0.15 lb/ft2 (result)
As the pipe's centerline gets further away, the shear stress now varies linearly.
τ = 2 τw (r/D)
The centerline is 0.5 inches from the wall in this case, therefore r and are both equal to 0 psf (result).
r = 0.2 inches at 0.3 inches from the wall.
So τ = 2 (0.15) (0.2/1)
= 0.06 psf (result).
Learn more about stress here-
https://brainly.com/question/13261407
#SPJ4
most newer vehicles do not have a separate voltage regulator and control the output of the charging system through the ______.
Most newer vehicles do not have a separate voltage regulator and control the output of the charging system through the engine control unit (ECU).
How does the engine control unit function?As the primary controller and brain of the engine management system, the electronic engine control unit (ECU) is the key component. It regulates ignition, fuel injection, airflow, and fuel supply and hence does not need the voltage regulator. An internal combustion engine's engine control unit, also known as an engine control module, is a kind of electronic control unit that manages a number of actuators to maintain peak engine performance.
The control unit may also regulate the exhaust system and integrate transmission and vehicle operations thanks to the scalability of its performance. All powertrain types and topologies, including those using gasoline, diesel, compressed natural gas (CNG), ethanol, hybrid, and fuel cell systems, are managed by the ECU.
To learn more about voltage regulator, visit:
https://brainly.com/question/24276448
#SPJ4
operating systems provides ways to allocate memory to application and system software along with recovering when it is no longer needed by software is __
The OS continuously switches between memory and storage (hard disk or SSD) devices to facilitate the allocation process, keeping track of each memory location and its allocation status.
The OS also controls how much memory will be allotted to which processes at what time.
The use of cache memory and random access memory by the processor is supervised and controlled by hardware memory management. The OS memory management makes sure there are enough memory resources for each program that is now running to store its objects and data system. RAM is merely an implementation detail and performance optimization (one that, with present technology, is required). The code and data for certain apps will be in RAM, the pagefile, or the original files. Depending on the requirements of the application, this may change.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
if your application is composed of multiple modules (programs), which of the following program processing would you recommend?
It depends on the specific requirements of your application and the type of modules you are working with.
However, in general, there are several processing approaches that can be considered, including sequential processing, parallel processing, and distributed processing. Sequential processing involves executing the modules one after the other in a linear fashion. This approach is suitable for simple applications with a small number of modules. Parallel processing involves executing multiple modules simultaneously, which can speed up the overall processing time. This approach is suitable for applications with a large number of modules and high processing requirements. Distributed processing involves distributing the modules across multiple computers, with each computer executing its own set of modules. This approach can further improve processing speed and is suitable for very large applications with high processing requirements.
Learn more about applications :
https://brainly.com/question/28650148
#SPJ4
a 3-input or gate with a bubble on two inputs is the same as 3-input and gate with how many bubbles in total?
A 3-input OR gate with a bubble on two inputs is the same as a 3-input AND gate with four bubbles in total.
What is gate?Gate in engineering is the process of controlling and regulating the flow of an electrical current or signal. In a computer circuit, the gate acts as a switch, allowing or preventing the flow of electrical current. In communication systems, gates are used to regulate the flow of signals between devices. In addition, gates are used to regulate the speed and timing of the electrical signals.
A 3-input OR gate with a bubble on two inputs is the same as a 3-input AND gate with four bubbles in total. The two bubbles on the two inputs of the OR gate are equivalent to two AND gates with one bubble each. An AND gate with one bubble has the same functionality as an AND gate with two bubbles, so the OR gate is equivalent to two AND gates with one bubble each plus another AND gate with two bubbles. This adds up to four bubbles in total.
To learn more about gate
https://brainly.com/question/29437650
#SPJ4
What are the limiting dimensions (height, width, and length) for individual pieces of structural steel that can be shipped by trucks on highways with no difficulty or special permitting?
This depends on the type of truck and the regulations of the specific highway.
what is dimension
Dimensions are used to refer to the physical aspects or measurements of an object. They are typically expressed as length, width and height. Length is the measure of an object from end to end, width is the measure of an object from side to side and height is the measure of an object from top to bottom. Dimensions are used in a variety of fields such as engineering, architecture, art, mathematics and science. Knowing the dimensions of an object can help to calculate its area, volume, or weight. Dimensions are also used to compare the size of objects to each other.
To know more about dimension
https://brainly.com/question/28942977
#SPJ4
which of the following knobs on the testing unit should be turned slowly to avoid blowing a fuse?
When performing any kind of testing on a unit, it is important to exercise caution and to turn knobs slowly and carefully.
When it comes to testing a unit to avoid blowing a fuse, it is especially important to turn any knobs on the unit slowly and with care to avoid overloading the circuits and causing the fuse to blow. Be sure to check the manufacturer's instructions to ensure that you are setting the knobs to the right levels.
A testing unit is a system that is used to validate the performance or functionality of a product, device, or system. It is typically composed of a set of tools and components that are used to simulate the environment in which the product, device, or system will be used. The results of the test can then be used to determine the performance of the product, device, or system, and to identify any potential issues. Testing units are commonly used in the development and production phases of product design and development to ensure quality and reliability.
Learn more about controls of the single fuse testing unit:
https://brainly.com/question/4120040
#SPJ4
David wishes to accumulate $1million by the of 20 years by making equal anual end of year deposits over the next 20 years if david can earn 10%on his envestment how much he deposit at the end of each year
Answer:
Explanation:
We can use the formula for calculating the future value of an annuity to determine the amount that David needs to deposit each year. The formula is:
A = F / ( (1 + r)^n - 1) / r
where:
A is the annual deposit
F is the future value ($1 million)
r is the interest rate (10%)
n is the number of years (20)
Plugging in the values, we get:
A = 1000000 / ( (1 + 0.1)^20 - 1) / 0.1
A = $38,851.68
Therefore, David needs to deposit $38,851.68 at the end of each year for 20 years to accumulate $1 million.
What (if anything) is wrong with the following code snippet, which searches for the searchedValue variable in the array data?
String[] data = { "abc", "def", "ghi", "jkl" };
String searchedValue = "ghi";
int pos = 0;
boolean found = false;
while (pos < data.length)
{
if (data[pos].equals(searchedValue))
{
found = true;
}
else
{
found = false;
}
pos++;
}
if (found)
{
System.out.println("Found at position: " + pos);
}
else
{
System.out.println("Not found");
}
The code snippet has an error in the output of the final "Found at position" message. The position is printed as "pos", which would be the next position after the searched value was found.
To correct this, the "pos" variable should be decremented by 1 before it is printed. Additionally, the "found = false" statement in the else clause is unnecessary, as the "found" variable is being overwritten in every iteration of the loop. The correct code would look like this:
String[] data = { "abc", "def", "ghi", "jkl" };
String searchedValue = "ghi";
int pos = 0;
boolean found = false;
while (pos < data.length)
{
if (data[pos].equals(searchedValue))
{
found = true;
break;
}
pos++;
}
if (found)
{
System.out.println("Found at position: " + (pos + 1));
}
else
{
System.out.println("Not found");
}
Learn more about String :
https://brainly.com/question/30099412
#SPJ4
a structure or pipe that is meant for carrying water; usually using gravity.
A water pipe or water line is a structure or pipe that is meant for carrying water; usually using gravity.
What exactly is Gravity?
Gravity is a natural force that attracts two objects with mass towards each other. It is the reason objects fall towards the ground and the Earth orbits around the Sun. The strength of gravity depends on the mass of the objects and the distance between them.
The stronger the gravitational force between two objects, the more massive one is and the closer it is to another. Gravity is described by the law of gravitation, which was formulated by Sir Isaac Newton. It plays a crucial role in many aspects of the universe, including the formation of stars and planets and the behavior of celestial bodies.
In our daily lives, gravity affects us by keeping us grounded and providing the force we need to jump and move.
To learn more about Gravity, visit: https://brainly.com/question/13258933
#SPJ4
determine the torque applied to the shaft of a car that transmits 275 hp and rotates at a rate of 3000 rpm.
The torque applied to the shaft of a car that transmits 275 hp and rotates at a rate of 3000 rpm is 481.92 lbf.ft
Why is it known as torque?As a twisting or turning force, torque typically causes objects to rotate around an axis, which could be the center of mass or a fixed point. Torque is simply a force's propensity to turn or twist in physics. Torque is a term that can be referred to using a variety of different terms, including moment and moment of force. The "moment arm" or "lever arm" can refer to the separation between the force application point and the axis of rotation.
Given:
Power transmitted, P = 275 hp
= 275 × 0.746 kv
=205.15 kw
N = 3000 rmp
P = TW
= P = t- 2πN / 60
= 205.15 × 10³ = T ×(2π ×3000)/60
T = 653.01 N-m
T = 653.01 × 0.225 × 3.28 lbf.ft
T= 481.92 lbf.ft
To learn more about torque, visit:
https://brainly.com/question/19865132
#SPJ4
a fluid flows steadily through a circular pipe of uniform cross-sectional area as shown below. if the outlet density of the fluid decreases to 1/2 of its inlet value, what happens to the average fluid velocity?
The correct answer is What happens to the average fluid velocity if the fluid's density drops to % of its input value? A) Because it must be, the velocity won't change.
Mean fluid velocity: This parameter is designed to offer the rate of mass flow through the tube, which is the flow of a mass through a surface per unit time (Bergman et al., 2011), when multiplied by the fluid density and the tube's cross-sectional area: (8.11) The analysis of fluid flows using numerical solution techniques is known as computational fluid dynamics (CFD). You can examine intricate issues involving fluid-fluid, fluid-solid, or fluid-gas interaction using CFD. The fluid's flow rate, v, is expressed as a number of metres per second (m/s). The cross-sectional area of the pipe through which fluid is flowing is denoted by the letter A. Typically, it is measured in square metres (m2)
To learn more about fluid velocity click on the link below:
brainly.com/question/17010211
#SPJ4
a specimen is originally 1 ft long, has a diameter of 0.5 in., and is subjected to a force of 500 lb. when the force is increased from 500 lb to 1800 lb, the specimen elongates 0.009 in. determine the modulus of elasticity for the material if it remains linear elastic.
For me, structural steel would be a classic example. Keep in mind that it contains a sizable linear elastic portion. It comes to an end just as surrendering begins.
Naturally, the assumption is that it is linearly elastic up to yielding. The slope of the initial linear section of the stress-strain curve in the elastic region—i.e., the difference between the stress change () and the strain change ()—is the modulus of elasticity (E). A mathematical model called linear elasticity describes how solid objects deform and experience internal stress as a result of specified loading circumstances. It is a branch of continuum mechanics and a simplification of the more comprehensive nonlinear theory of elasticity.
Learn more about stress here-
https://brainly.com/question/17252580
#SPJ4
A firm wants to sponsor a new engineering lab at a local university.
This requires $4.0M to construct the lab, $1.5M to equip it, and
$750,000 every 6 years for new equipment. What is the required
endowment if the university will earn 8% interest on the funds?
Answer:
Explanation:
Find the present value of the cost of new equipment every 6 years using the formula for present value of an annuity:
PV = A * (1 - (1 + r)^-n) / r
Where:
PV = Present value
A = Annuity payment
r = Interest rate
n = Number of periods
In this case, A = $750,000, r = 8%, and n = 6 years. Plugging these values into the formula, we get:
PV = $750,000 * (1 - (1 + 0.08)^-6) / 0.08 = $3,519,702.81
Add the present value of the cost of new equipment to the initial construction and equipment costs:
Total present value = $4,000,000 + $1,500,000 + $3,519,702.81 = $9,019,702.81
This is the amount of money that the university needs to have in an endowment in order to earn 8% interest and cover the costs of the lab and new equipment.
Therefore, the required endowment is $9,019,702.81.
Provide counterexamples to the following statements. a. If a and b are integers where a| b and b a, then a-b. b. If? > 0 then n > 0. C. If n is an even number, then n2 + 1 is prime. d. If n is a positive integer, then n>n
a. Counterexample: a = 4, b = 8; a|b and b = a, but a-b = -4.
b. Counterexample: ? = -1 and n = 0; ? > 0, but n > 0 is false.
c. Counterexample: n = 4; n is an even number, but n2 + 1 = 17, which is not prime.
d. Counterexample: n = 0; n is a positive integer, but n = 0 and 0 > 0 + 1 is false.
What is Integer?
Integer is a data type used in programming to represent whole numbers. It is a numerical data type that can be positive, negative, or zero. Integers are the building blocks of programming, and they are often used in calculations and mathematical operations. Integer values cannot contain any fractional or decimal components. They can be represented in various formats, including hexadecimal, octal, decimal, and binary formats. Integer values are usually stored in a computer's memory as 32-bit or 64-bit words, depending on the system.
To know more about Integer
https://brainly.com/question/929808
#SPJ4
The Pencil tool can be double-clicked to adjust the fidelity of the tool, which in turn affects its _____ when in use.
precision. Double-clicking on the Pencil tool allows the user to adjust the fidelity of the tool, which affects how precisely the tool can create shapes and lines when in use.
What is tool?A tool is an object used to perform a specific task. Tools are generally used to increase efficiency and accuracy, and to reduce labor. Common tools include items such as hammers, screwdrivers, wrenches, saws, pliers, spades, shovels, and axes. Many tools can be used for multiple purposes, and can be adapted for a variety of uses. Tools can be manual or powered, and can range from simple to complex. They can be used for construction, repair, and maintenance, and can be used in a variety of industries. Tools are essential for any job, and can make a task easier or faster to complete.
Higher fidelity settings can create more precise lines, while lower fidelity settings are more suited to creating rougher shapes and lines.
To learn more about tool
https://brainly.com/question/15207557
#SPJ4
Why are so many people against EV?
Below are just some of the reasons why some people may be against EVs like range anxiety, high cost.. It's important to remember that opinions and perspectives can vary.
What are these reasons in details?
There are several reasons why some people may be against electric vehicles (EVs):
Cost: Currently, EVs tend to be more expensive upfront than traditional gasoline-powered vehicles, although this is becoming less of an issue as costs are decreasing.
Charging infrastructure: Some people worry about the availability of charging stations and the time it takes to charge an EV, although this is becoming less of an issue as the charging infrastructure is improving.
Range anxiety: Some people worry about the distance they can travel on a single charge, although this too is becoming less of an issue as battery technology improves.
Lack of familiarity: Some people are simply not familiar with EVs and may be resistant to change.
Environmental impact: While EVs produce fewer emissions than traditional gasoline-powered vehicles, they still have an environmental impact, such as through the production of the batteries and the generation of electricity used to charge them.
To learn more about electric vehicles (EVs), visit: https://brainly.com/question/29522053
#SPJ1
explain in your own words the differences between a batch reactor, a cstr and a plug flow reactor. also describe at least two common assumptions made to solve reactor modeling problems and give one example for each reactor type of a natural or engineered system that can be represented using that model.
Similar to CSTRs, the reactor continuously produces and releases reactants and products. But in PFRs, the reactor's contents aren't constantly agitated.
What is meant by plug flow reactor?Chemical engineers typically refer to a model used to represent chemical reactions in continuous, flowing systems with cylinder geometry as the plug flow reactor model (PFR, also known as continuous tubular reactor, CTR). Key reactor characteristics, such the reactor's dimensions, can be calculated by using the PFR model to anticipate the behavior of chemical reactors of tubular type.
Assumptions:
1) Batch Reactor
Number input and output
Unsteady state and uniform
Well mixed
2) CSTR(Perfectly Mixed)
Continuous J/P & O/P
Steady-state (Accumulation = 0)
Uniform Throughout
3) PFB or Plug flow reactor
Continuous F/P & O/P
Steady State[Acc = 0]
Non-uniform ( changes w.r.t. position)
Model
[Rate of mass into reactor] - [Rate of mass out from reactor] - [Rate of mass consumption from reactor] +[Rate of mass generation] = [Rate of mass accumulation in reactor]
Therefore,
[tex]in_{in} - in_{out} - (-rA).w(N.W) + in_{gen} = d/dt (SV)[/tex]
To learn more about Plug flow reactor, visit:
https://brainly.com/question/30396700
#SPJ4
Select the equivalent Transfer Function representation Y (s) from the options below, assuming G, (s)-s+1, G2 (s) = s+1, Gs(s) = s + 1, and H (s) = 1 2 s2 +2s +3 82-38-2 (b) (1 point) Select the equivalent State Space representation (matrices A and B) from the options below, again assuming the options below, again assumingGs) 8+1, and H (s) = 1 -2 0 A=1-3-2
The matrices A and B are A= [0 1; -3 -2] and B=[1; 0].
What are Matrices?
A matrix is a rectangular array of numbers, symbols, or expressions, arranged in rows and columns. It is typically used to represent a mathematical relationship between two or more sets of data. Matrices can be used to represent linear transformations, such as rotations, reflections, and scaling.
Additionally, matrices can be used to solve systems of linear equations, to find the inverse of a matrix, and to calculate determinants. Matrices are also used in graph theory to represent the connections between nodes in a network.
To know more about Matrices
https://brainly.com/question/24810141
#SPJ4
Technician A says that if the yellow warning lamp is illuminated indicating a fault in the electronic brake control system, you should retrieve the diagnostic trouble codes and follow the procedure listed in the service information. Technician B says that once the fault has been corrected, clear the diagnostic code and verify that it does not reset. Who is correct?
Both technicians are correct. Technician A: Retrieve diagnostic codes and follow service information. Technician B: Clear codes after fault correction, verify no reset..
Both technicians are correct and their statements are complementary to each other.
Technician A is correct in saying that if the yellow warning lamp is illuminated indicating a fault in the electronic brake control system, it's important to retrieve the diagnostic trouble codes to identify the source of the problem. By retrieving the codes, you can understand what component or system is causing the fault and then refer to the procedure listed in the service information to diagnose and fix the problem.
On the other hand, Technician B is correct in saying that once the fault has been corrected, it's important to clear the diagnostic code to erase any stored information related to the fault. This is crucial because the code could potentially cause the warning lamp to illuminate again in the future, even if the problem has been fixed. By clearing the code and verifying that it does not reset, you can ensure that the electronic brake control system is operating properly and that there are no lingering issues.
In conclusion, both technicians are providing valuable information for diagnosing and correcting faults in the electronic brake control system. By following both technicians' advice, you can ensure that the fault is properly addressed and the system is operating optimally.
Learn more about Technician here: https://brainly.com/question/14290207
#SPJ4
Importance of linear algebra and trigonometry in Geomatic engineering
Answer:
Explanation:
Linear algebra and trigonometry are important mathematical tools used in geometric engineering.
Linear algebra is important in geometric engineering because it provides a powerful tool for analyzing and solving systems of linear equations, which are frequently used to describe geometric relationships and transformations. For example, linear algebra is used to study the properties of lines and planes, to describe the transformations that occur when an object is translated, rotated, or scaled, and to model the deformation of objects under load.
Trigonometry, on the other hand, is important in geometric engineering because it provides a way to describe and understand the relationships between lengths and angles. This is particularly important in surveying and mapping, where angles and distances must be accurately measured and analyzed to produce accurate maps and models of the earth's surface. Trigonometry is also used to calculate the lengths and angles of triangles, which are basic building blocks for many geometric objects and figures.
In summary, linear algebra and trigonometry are essential tools in geometric engineering because they provide a way to describe and analyze the geometric relationships and transformations that are central to the field.
in which mechanical test is a specimen deformed, usually to fracture, with a gradually increasing load that is applied uniaxially along the long axis of the specimen, i.e. the specimen is pulled apart?
The mechanical test that involves deforming a specimen to fracture with a gradually increasing load applied uniaxially along the long axis of the specimen is called a tensile test.
A tensile test, also known as a tension test, is used to determine the mechanical properties of a material, such as its strength, ductility, and toughness. The test is performed by clamping a cylindrical or rectangular specimen between two grips, and then applying a load to the specimen in a direction that is parallel to its longitudinal axis. The load is gradually increased until the specimen fractures, and the stress-strain behavior of the material is recorded during the test.
During a tensile test, the stress in the material increases until the maximum stress that the material can withstand is reached. This maximum stress is known as the tensile strength. The amount of strain that occurs before the specimen fractures is a measure of the material's ductility. The toughness of the material is determined by the amount of energy required to fracture the specimen.
Tensile tests are used to determine the mechanical properties of a variety of materials, including metals, polymers, composites, and ceramics. The results of tensile tests can be used to select materials for engineering applications, optimize processing conditions, and evaluate the performance of materials under different loading conditions.
In conclusion, a tensile test is a mechanical test in which a specimen is deformed to fracture with a gradually increasing load applied uniaxially along the long axis of the specimen. The results of tensile tests provide important information about the mechanical properties of materials, including their strength, ductility, and toughness.
To know more about mechanical test: https://brainly.com/question/15076728
#SPJ4
an ideal step-up transformer with turn ratio 1:20 is supplied with an input power of 110 w. if the output voltage is 270 v, calculate the output power (in w) and input current (in a).
Therefore, the input current is 0.122 A, and the output power is 32.94 W.
Using the turn ratio and the input voltage, which can be obtained from the input power and input current, the step-up transformer's output voltage can be calculated. Ohm's Law can be used to compute the input current. Using the input power and input current, we will first determine the input voltage:
Input Voltage (V) * Input Current = Input Power (P) (I)
Input Voltage (V) is calculated as Input Power (P) / Input Current (I)
Making the following substitutions: Input Voltage (V) = 110 W / Input Current (I)
Next, we'll figure out the input current using the turn ratio:
Input Voltage (V) * Turn Ratio equals output voltage (V) (N)
Output voltage divided by input voltage equals turn ratio (N) (V)
Input Current (I) = Output Voltage (V) / (Turn Ratio (N) * Input Voltage (V)
= 20 * Input Voltage (V) * 270 V = Input Current (I)
The input current will then be determined by substituting the computed input voltage value:
= 20 * 110 W / Input Current (I) / Input Current (I) = 270 V
= 20 * 110 W / Input Current (I) = 270 V
Input Current (I) is equal to (20 * 110 W / 270 V * I).
Input Current (I) is equal to (270 V*I) / 2200 W.
= 0.222 A is the input current (I).
Output Voltage (V) * Output Current = Output Power (P) (I)
Power Output (P) = 270 V * Current Output (I)
Output Power (P) / Output Voltage equals Output Current (I) (V)
Output Power (P) / 270 V = Output Current (I)
Power Output (P) = 0.122 A * 270 V
Power Output (P) = 32.94 W
Therefore, the input current is 0.122 A, and the output power is 32.94 W.
Learn more about current Visit: brainly.com/question/24858512
#SPJ4
technician a says permanent magnet starter motors are more robust than electromagnetic field type motors and can better withstand being dropped. technician b says permanent magnet motors can produce more torque using less electric current. who is correct?
Both claims (a) and (b) are false. A starter is, in essence, a device that has the ability to propel the functioning of an IC engine by rotating the engine's crank.
Starters come in a variety of forms, including electric, pneumatic, and hydraulic. The starter for very large engines might even be another motor. When a permanent magnet starter is utilized, the starter motor is no longer necessary. starter: Vehicles started using permanent magnet starters in the latter part of the 1980s. These motors' two main benefits are their light weight and compact size. Both claims (a) and (b) are false. A starter is, in essence, a device that has the ability to propel the functioning of an IC engine by rotating the engine's crank.
Learn more about engine here-
https://brainly.com/question/27162243
#SPJ4
a long vertical pipe filled with water is equipped with pressure gauges at each end as shown below. an engineering student observing the pipe notices that each pressure gauge reads the same value. is water flowing in the pipe? if so, in what direction is the water flowing?
No water is flowing as both gauges read the same value, indicating equal pressure at both ends of the pipe. Water would be flowing if there was a difference in pressure, with flow direction towards the lower pressure end.
Water is not flowing in the pipe as both pressure gauges read the same value. This indicates that there is no difference in pressure between the two ends of the pipe, which is a necessary condition for water to flow. In a pipe filled with fluid, flow occurs from high-pressure regions to low-pressure regions. If the pressures at both ends are equal, then there is no driving force for fluid to flow, and hence the fluid remains at rest. It's important to note that pressure alone does not determine the flow of fluid in a pipe. Other factors such as viscosity, pipe diameter, and fluid velocity also play a role.
Learn more about pipe here:
https://brainly.com/question/11916787
#SPJ4
T/F bookmark question for later a very large percentage of knowledge based careers now require skills to design and build complex databases.
True. Database design and development are essential skills for many knowledge-based careers, such as software engineering, data science, and database administration.
What is data science?Data Science is a field that uses scientific methods, processes, algorithms and systems to extract knowledge and insights from data in various forms, both structured and unstructured. It is a multidisciplinary approach that combines statistics, mathematics, machine learning, computer science, and domain knowledge. Data Science uses predictive analytics to analyze large data sets to identify patterns, trends and correlations to uncover hidden insights and to make predictions and decisions. Data Science also includes data visualization, which is the graphical representation of data to aid in understanding and decision-making. Data Science is used in many industries to solve complex problems and to gain a competitive edge.
To learn more about data science
https://brainly.com/question/29555632
#SPJ4
Boxes A and B are connected to each end of a light vertical rope, as shown in the following figure. A constant upward force 90.0 N is applied to box A . Starting from rest, box B descends 12.0 m in 3.50 s . The tension in the rope connecting the two boxes is 34.0 N
The force acting on box B is calculated as 4.39 kg while the force acting on box A is calculated as 7.24 kg.
What is Upward Force?Upward force may be characterized as a type of force that is significantly exerted on an object wholly or partly immersed in a fluid. This upward force is also called Upthrust.
According to the question,
The upward force is = 90 N.
Box B was placed at a distance of s = 12.0 m.
Time is taken = 3.50 sec.
The tension in the rope connecting the two boxes is = 34.0 N.
The acceleration of the box B is calculated as follows:
s = ut + [tex]\frac{1}{2} at^2[/tex].12 = 0 × t + [tex]\frac{1}{2}[/tex] × a × [tex](3.50)^2[/tex].
5.775 [tex]s^2a[/tex] = 12 m.
a = 2.07 m/[tex]s^2[/tex].
The forces on the box B are:
[tex]M_2_g-T_2 = M_2_a[/tex]
[tex]M_2(g-a) = T_2[/tex]
[tex]M_2= \frac{T_2}{g-a}[/tex]
[tex]M_2 = \frac{34 N}{9.8-2.07}[/tex] = 34/7.73 = 4.39 kg.
The force acting on box A is calculated as follows:
[tex]T_2+M_1g-F= M_1a[/tex][tex]M_1(g-a)= F-T_2[/tex]
M1 = [tex]\frac{F-T_2}{g-a}[/tex] = [tex]\frac{90N -34N}{9.8-2.07}[/tex] = 56N/ 7.73 = 7.24 kg.
Therefore, the force acting on box B is calculated as 4.39 kg while the force acting on box A is calculated as 7.24 kg.
To learn more about Upward forces, refer to the link:
https://brainly.com/question/10119978
#SPJ1
Find the critical height â„Ž of the water level that causes the concrete gravity dam to be on the verge of tipping over because fo water pressure. The density of concrete is rhoc=2.40Mg/m3.
For f=32, the following equation, hw = 0.032 vf + 0.763 - 0.271 f34, can be used to calculate wave height. where hw is the height in meters from the top of the crest to the bottom of the trough.
V stands for kilometers per hour. The vertical distance between a wave's crest (peak) and trough is known as the wave height. The crest and trough of a wave, respectively, are its highest and lowest surface portions. The wave height is the vertical distance between the peak and trough. The wavelength is the horizontal separation between two consecutive crests or troughs. Wave direction is the direction the wave is coming from, wave period is the length of the wave, and wave height is typically the height of the wave from trough to crest.
Learn more about equation here-
https://brainly.com/question/24179864
#SPJ4
What skills and knowledge do you hope to gain from electrical electronic engineering? 1200 words
Electrical engineers require in-depth knowledge about different software which they might use to develop schematics and draft plans for electric circuits and systems.
What is the role of electrical engineers?The role of an electrical engineer may be determined by the fact that design, develop, test, and supervise the manufacture of electrical equipment, such as electric motors, radar and navigation systems, communications systems, or power generation equipment.
Electrical engineers also design the electrical systems of automobiles and aircraft. They work to solve complicated problems by applying the principles of electricity, electronics, and electromagnetism.
They have a good tendency to High-performance computing, digital signal processing, communications, and control, computer networks, detection, and estimation, etc. They create and improve systems to benefit society.
Therefore, electrical engineers require in-depth knowledge about different software which they might use to develop schematics and draft plans for electric circuits and systems.
To learn more about Electrical engineers, refer to the link:
https://brainly.com/question/20442050
#SPJ1