The fusion process of two protons in the sun to create a deuterium ion, a positron, and a neutrino results in the release of a considerable amount of energy. The energy released in this process is calculated using Einstein's famous equation, E=mc², where E is the energy released, m is the mass lost during the reaction, and c is the speed of light.
In this reaction, the mass lost is equal to the difference in mass between the two protons and the resulting deuterium ion, positron, and neutrino. The mass of two protons is 2.0141 atomic mass units (amu), while the mass of a deuterium ion, positron, and neutrino is 2.0014 amu, 0.0005 amu, and negligible, respectively. Therefore, the mass lost is approximately 0.0112 amu.
Using the equation E=mc², we can calculate the energy released as E = (0.0112 amu) × (1.66054 × 10⁻²⁷ kg/amu) × (2.998 × 10⁸ m/s)², which yields approximately 4.3 × 10⁻¹² joules of energy.
In summary, the fusion process of two protons in the sun to create a deuterium ion, a positron, and a neutrino releases approximately 4.3 × 10⁻¹² joules of energy, which is a tiny amount compared to the vast amount of energy produced by the sun's fusion reactions overall.
for more such questions on fusion
https://brainly.com/question/17870368
#SPJ11
Mass moment of inertia of an object about an axis parallel to the centroidal axis is Question 1 options: Smaller than the mass moment of inertia about the centroidal axis Greater than the mass moment of inertia about the centroidal axis Equal to the mass moment of inertia about the centroidal axis
The mass moment of inertia of an object about an axis parallel to the centroidal axis is greater than the mass moment of inertia about the centroidal axis.
The centroidal axis is the axis passing through the centroid of the object. The mass moment of inertia about this axis is the minimum value of the mass moment of inertia for any axis parallel to this axis. When an object is rotated about an axis parallel to the centroidal axis, the distance of each element of the object from the axis of rotation increases. Therefore, the moment of inertia about this axis is greater than the moment of inertia about the centroidal axis.
Therefore, the mass moment of inertia of an object about an axis parallel to the centroidal axis is greater than the mass moment of inertia about the centroidal axis.
To know more about moment of inertia, visit:
https://brainly.com/question/15246709
#SPJ11
Why would batteries with high current capacity have a lower internal resistance than batteries with a low current capacity
According to the given information lower resistance allows for the efficient flow of current and reduces the energy loss due to heat generated within the battery.
Batteries with high current capacity are designed to deliver high amounts of current in a short amount of time. To achieve this, they are constructed with larger electrodes and thicker electrolytes, which results in a lower internal resistance. This lower resistance allows for the efficient flow of current and reduces the energy loss due to heat generated within the battery. Batteries with low current capacity, on the other hand, have smaller electrodes and thinner electrolytes, which leads to higher internal resistance and a lower ability to deliver high currents.Batteries with a high current capacity typically have a lower internal resistance than batteries with a low current capacity because the internal resistance of a battery is directly related to the amount of current that can flow through it.
Internal resistance is the resistance that a battery offers to the flow of current within itself, and it is caused by several factors, including the resistance of the electrolyte and the resistance of the electrodes. When a battery is designed to deliver high current, it needs to have a low internal resistance to allow the current to flow through it easily.
High-capacity batteries typically have a larger electrode surface area and a larger volume of electrolyte, which provides more pathways for the current to flow through, resulting in a lower internal resistance. Additionally, high-capacity batteries often have thicker electrodes
To know more about internal resistance visit:
https://brainly.com/question/30902589
#SPJ11
A wooden block with mass 1.75 kg is placed against a compressed spring at the bottom of a slope inclined at an angle of 35.0 ∘ (point A). When the spring is released, it projects the block up the incline. At point B, a distance of 7.90 m up the incline from A, the block is moving up the incline at a speed of 7.05 m/s and is no longer in contact with the spring. The coefficient of kinetic friction between the block and incline is μk = 0.55. The mass of the spring is negligible.
-Calculate the amount of potential energy that was initially stored in the spring.
Take free fall acceleration to be 9.80 m/s2 .
The amount of potential energy initially stored in the spring is 88.3 J.
To calculate the amount of potential energy initially stored in the spring, we need to use the conservation of energy principle. At point A, the block has zero kinetic energy, and all the energy is stored in the compressed spring as potential energy. At point B, the block has kinetic energy, and some of the potential energy stored in the spring has been converted into kinetic energy.
The potential energy stored in the spring can be calculated using the formula:
PE = (1/2)kx^2
where PE is the potential energy, k is the spring constant, and x is the displacement of the spring from its equilibrium position.
Since the mass of the spring is negligible, we can assume that all the potential energy stored in the spring is transferred to the block. Therefore, we can use the formula:
PE = (1/2)mv^2 + mgxsinθ + mgxcosθμk
where m is the mass of the block, v is the speed of the block at point B, g is the acceleration due to gravity, x is the distance between points A and B, θ is the angle of the incline, and μk is the coefficient of kinetic friction.
Plugging in the given values, we get:
PE = (1/2)(1.75 kg)(7.05 m/s)^2 + (1.75 kg)(9.80 m/s^2)(7.90 m)sin(35.0°) + (1.75 kg)(9.80 m/s^2)(7.90 m)cos(35.0°)(0.55)
PE = 88.3 J (to three significant figures)
Therefore, the amount of potential energy initially stored in the spring is 88.3 J.
learn more about energy here
https://brainly.com/question/16243767
#SPJ11
what is the magnitude (in n/c) and direction of an electric field that exerts a 4.00 ✕ 10−5 n upward force on a −1.75 µc charge? magnitude n/c direction --select--
The magnitude of the electric field can be found using the formula E = F/q Where E is the electric field, F is the force exerted on the charge, and q is the magnitude of the charge. Plugging in the given values, we get Therefore, the magnitude of the electric field is 22.86 x 10^3 N/C.
The find the direction of the electric field, we need to use the concept of the direction of the force experienced by the charge. Since the force is directed upwards, we know that the electric field must be directed downwards to cause an upward force on the negative charge. Therefore, the direction of the electric field is downwards. In summary, the magnitude of the electric field is 22.86 x 10^3 N/C and the direction is downward to find the magnitude and direction of the electric field that exerts a force on a charge, we can use the following formula Electric field (E) = Force (F) / Charge (q) Force (F) = 4.00 × 10^ (-5) N (upward) Charge (q) = -1.75 µC = -1.75 × 10^(-6) C Calculate the electric field magnitude E = F / q E = (4.00 × 10^ (-5) N) / (-1.75 × 10^ (-6) C) E ≈ 22,857 N/C Determine the direction Since the charge is negative, the electric field's direction is opposite to the force's direction. The force is acting upward, so the electric field's direction is downward. In conclusion, the magnitude of the electric field is approximately 22,857 N/C, and its direction is downward.
learn more about electric field here.
https://brainly.com/question/9063289
#SPJ11
Angular Momentum.doc - THE MECHANICAL UNIVERSE Explain how conservation of angular momentum causes an ice skater to spin faster:___________
Conservation of angular momentum causes an ice skater to spin faster because of the law of conservation of angular momentum.
When an ice skater pulls their arms closer to their body, their moment of inertia decreases, which causes their angular velocity to increase to maintain the conservation of angular momentum. This increase in angular velocity results in the ice skater spinning faster. This is similar to how a figure skater can speed up their spin by pulling in their arms, and slow down their spin by extending their arms out. The conservation of angular momentum is a fundamental principle of physics and applies to all rotating objects.
Torque and angular momentum are the rotating equivalents of force and momentum. There is a link between angular momentum and torque that is comparable to the relationship between force and momentum. An object's change in momentum is defined as force. Torque is caused by a change in the particle's angular momentum.
The net external torque on any system is frequently equal to the total torque on the system since the sum of all internal torques in any system is always zero (this is the rotational equivalent of Newton's third law of motion).
Learn more about angular momentum here
https://brainly.com/question/29897173
#SPJ11
What is the height of a student whose z-score is 3? 55"" 53"" 47"" 43""
The mean height of the students in the group is 47 inches.
To find the mean height of the students in the group, we need to sum up all the heights and divide by the total number of students. Using the given table, we have:
Total height = 45 + 48 + 49 + 40 + 53 = 235 inches
Total number of students = 5
Mean height = Total height / Total number of students
= 235 / 5
= 47 inches
Therefore, the mean height of the students in the group is 47 inches.
Learn more about The mean
https://brainly.com/question/28205896
#SPJ4
Full Question: What is the mean height of the students in the group? 1-47 inches 2-49 inches 3-51 inches 4-53 inches The table shows the heights of students in a group. Student Height (in inches) A 45 B. 48 49 D. 40 53 E.
Answer:
55
Explanation:
This is 5th-grade science
An example of heat moving out of matter is liquid water changes to solid.
option D.
What is heat gained?A matter is said to gain heat when heat flows from the environment into the matter that results in a change of state of the matter.
when snow melts and turns to slushy water; the snow gained heat, so heat flows into the snow.
when the ice cream melts in a dish in the sun, the ice cream gained heat.
when liquid water changes to water vapor, the liquid water gained heat, so heat flowed into the liquid water.
However, when liquid water changes to solid, such as ice, the liquid water lost heat to the surrounding.
Learn more about heat gain and loss here: https://brainly.com/question/14702484
#SPJ1
If an object starts from rest and accelerates with a constant angular acceleration of 6.0 rad/s2, what is the angular velocity at 3.0 s
The angular velocity of the object at 3.0 s is 18 rad/s.
ω = αt
Plugging in the given values, we get:
ω = (6.0 rad/s²)(3.0 s)
ω = 18 rad/s
Angular velocity is a measurement of the rate at which an object is rotating around an axis. It is a vector quantity, meaning that it has both a magnitude and a direction. The magnitude of angular velocity is given by the angle of rotation per unit time, while the direction of angular velocity is perpendicular to the plane of rotation, following the right-hand rule.
Angular velocity is measured in units of radians per second (rad/s) or degrees per second (°/s). The formula for calculating angular velocity is ω = Δθ / Δt Where ω is the angular velocity, Δθ is the change in angle over time, and Δt is the time interval during which the rotation occurs.
To learn more about Angular velocity visit here:
brainly.com/question/29557272
#SPJ4
A microscope has a 1.8-cm-focal-length eyepiece and a 0.80-cm objective lens. Part A Assuming a relaxed normal eye, calculate the position of the object if the distance between the lenses is 14.2 cm . Express your answer using two significant figures. do
A microscope has a 1.8-cm-focal-length eyepiece and a 0.80-cm objective lens. Now, assuming a relaxed normal eye, we have to calculate the position of the object if the distance between the lenses is 14.2 cm and express the answer using two significant figures
To solve this problem, we can use the thin lens equation:
1/f = 1/do + 1/di
Where f is the focal length, do is the distance between the object and the lens, and di is the distance between the lens and the image.
For the eyepiece, f = 1.8 cm. For the objective lens, f = 0.80 cm. The distance between the lenses is 14.2 cm.
Let's assume that the final image is formed at infinity (since the eye is relaxed and doesn't need to adjust its focus). This means that di = infinity, and 1/di = 0.
Plugging in the values:
1/0.80 = 1/do + 0
Solving for do:
do = 1/0.80 = 1.25 cm
However, this distance is measured from the objective lens, not from the object itself. To find the distance from the object to the objective lens, we need to subtract the focal length of the objective lens:
do' = do - f = 1.25 cm - 0.80 cm = 0.45 cm
So the position of the object is 0.45 cm in front of the objective lens.
Learn more about lens at: https://brainly.com/question/25779311
#SPJ11
The loss of body heat involving the transfer of heat from the surface of one object to the surface of another without physical contact is:
The loss of body heat involving the transfer of heat from the surface of one object to the surface of another without physical contact is called radiation.
Radiation is a type of heat transfer that occurs through electromagnetic waves. In the case of the human body, radiation can occur when the body is in close proximity to colder objects or surfaces. This type of heat loss can happen even when the air temperature is relatively warm. For example, on a sunny day, a person may feel cooler when standing in the shade because the body is losing heat through radiation to the cooler shaded area.
It is important to be aware of radiation as a potential cause of heat loss and take appropriate measures to stay warm in cold environments. Wearing protective clothing and staying in warm areas can help reduce the amount of heat lost through radiation.
In summary, radiation is the transfer of heat from the surface of one object to the surface of another without physical contact and can result in the loss of body heat.
Learn more about heat here:
https://brainly.com/question/1429452
#SPJ11
Two spaceships, A and B, fly by a space station. An observer on the space station uses a telescope to measure the length of a meterstick in ship A and finds that it is 0.90 m . He does the same for ship B and finds that it is 0.50 m . What is the ratio of the speeds of the two ships relative to the space station, uBuA
ship B is traveling at approximately 1.78 times the speed of ship A relative to the space station.
What is speed?Speed is the rate at which an object covers distance in a given amount of time. It is a scalar quantity with units of distance per time.
What is relative speed?Relative speed is the speed of an object in relation to another object, taking into account the direction and velocity of both objects.
According to the given information:
To solve for the ratio of the speeds of the two ships relative to the space station, we can use the concept of length contraction in special relativity. The observer on the space station sees the meterstick in ship A as shorter than its actual length due to the ship's high velocity relative to the station. The same is true for ship B.
Let L0 be the actual length of the meterstick, and L be the length as measured by the observer on the space station. Then, we have:
L = L0 / γ
where γ is the Lorentz factor, given by:
γ = 1 / sqrt(1 - v^2 / c^2)
where v is the velocity of the ship relative to the space station, and c is the speed of light.
Using the given values, we have:
L(A) = 0.90 m
L(B) = 0.50 m
Solving for the velocities, we get:
v(A) = c * sqrt(1 - (L0 / L(A))^2) ≈ 0.435c
v(B) = c * sqrt(1 - (L0 / L(B))^2) ≈ 0.776c
where ≈ means approximately equal to.
Therefore, the ratio of the speeds is:
u(B)/u(A) = v(B)/v(A) ≈ 1.78
So ship B is traveling at approximately 1.78 times the speed of ship A relative to the space station.
To know more about speed visit:
https://brainly.com/question/17661499
#SPJ11
You do 29 J of work to load a toy dart gun. However, the dart is 10 cm long and feels a frictional force of 14 N while going through the dart gun's barrel. What is the kinetic energy of the fired dart
The kinetic energy of the fired dart is 15 Joules, calculated by subtracting frictional work from total work done.
To find the kinetic energy of the fired dart, we need to consider the work done to load the toy dart gun and the work lost to friction.
We're given the work done to load the gun as 29 Joules, and we need to find the frictional work.
Frictional work is calculated as frictional force (14 N) multiplied by the distance the dart travels in the barrel (0.1 m), which is 1.4 Joules.
The kinetic energy is found by subtracting the frictional work from the total work done, which is 29 J - 1.4 J = 15 J.
The kinetic energy of the fired dart is 15 Joules.
For more such questions on kinetic energy, click on:
https://brainly.com/question/8101588
#SPJ11
________ is/are a kind of matter that doesn't interact with visible light, but exerts a gravitational pull on other matter. It is hypothesized to exist in great quantities in the universe.
Dark matter is a kind of matter that doesn't interact with visible light, but exerts a gravitational pull on other matter.
It is hypothesized to exist in great quantities in the universe, as its gravitational effects can be observed in the rotation of galaxies and the large-scale structure of the universe. Dark matter is thought to make up about 85% of the total matter in the universe, but its exact nature and composition are still unknown. Many experiments are currently underway to try to detect and study dark matter particles.
Learn more about gravitational pull here:
https://brainly.com/question/13467280
#SPJ11
Light of wavelength 200 nm is incident on a material and the stopping potential for ejected electrons is 2.2 V. The work function of the material is closest to:
The work function of the material is approximately 6.415 x 10^(-19) J.
To determine the work function of the material, we can use the relationship between the stopping potential and the wavelength of the incident light.
The stopping potential (V_s) is related to the wavelength (λ) and the work function (φ) by the equation:
eV_s = hc / λ - φ,
where:
e is the elementary charge (approximately 1.602 x 10^(-19) C),
h is Planck's constant (approximately 6.626 x 10^(-34) J·s),
c is the speed of light (approximately 3.0 x 10^8 m/s),
λ is the wavelength of the incident light,
φ is the work function of the material.
We need to rearrange the equation to solve for the work function φ:
φ = hc / λ - eV_s.
Given that the wavelength of the light is 200 nm (200 x 10^(-9) m) and the stopping potential is 2.2 V, we can substitute these values into the equation:
φ = (6.626 x 10^(-34) J·s * 3.0 x 10^8 m/s) / (200 x 10^(-9) m) - (1.602 x 10^(-19) C * 2.2 V).
Calculating the expression:
φ ≈ 9.939 x 10^(-19) J - 3.524 x 10^(-19) J.
φ ≈ 6.415 x 10^(-19) J.
Therefore, the work function of the material is about 6.415 x 10^(-19) J.
To learn more about wavelength, refer below:
https://brainly.com/question/31143857
#SPJ11
If a wave vibrates up and down twice each second and travels a distance of 20 m each second, a. what is its frequency
Answer:
The frequency of a wave refers to the number of complete vibrations or cycles that occur in a unit of time, typically measured in Hertz (Hz), which is defined as cycles per second.
In this case, the wave vibrates up and down twice each second. Therefore, the frequency of the wave is:
frequency = number of cycles per second = 2 cycles/second = 2 Hz
Note that the frequency does not depend on the distance that the wave travels each second.
Explanation:
From the given question frequency is 2 cycles per second or 2 Hertz (Hz). In the given scenario, the wave vibrates up and down twice each second and travels a distance of 20 meters each second. To find the frequency, we will focus on the number of vibrations per second, as frequency is defined as the number of complete cycles (vibrations) per unit time.
In this case, the wave vibrates twice each second, meaning it completes two full cycles in one second. Therefore, the frequency of the wave is 2 cycles per second or 2 Hertz (Hz), as frequency is usually measured in Hertz.
Thus, when a wave vibrates up and down twice each second, it completes two cycles per second. As a result, its frequency is 2 cycles per second or 2 Hertz (Hz).
Learn more about frequency here:
https://brainly.com/question/29739263
#SPJ11
A boat is moving up and down in the ocean with a period of 1.7 s caused by a wave traveling at a speed of 4.0 m/s. What is the wavelength of this wave
The wavelength of the wave causing the boat to move up and down with a period of 1.7 s and a speed of 4.0 m/s is approximately 6.80 meters.
To find the wavelength of the wave causing the boat to move up and down with a period of 1.7 s and a speed of 4.0 m/s, we can use the formula:
wavelength = speed / frequency
First, we need to find the frequency of the wave. Since the period is the time it takes for one complete cycle of the wave, we can use the formula:
frequency = 1 / period
Substituting the given period of 1.7 s, we get:
frequency = 1 / 1.7 s ≈ 0.588 Hz
Now we can use the formula for wavelength:
wavelength = speed / frequency = 4.0 m/s / 0.588 Hz ≈ 6.80 m
Therefore, the wavelength of the wave causing the boat to move up and down with a period of 1.7 s and a speed of 4.0 m/s is approximately 6.80 meters.
Learn more about period here:
https://brainly.com/question/27217448
#SPJ11
Inelastic collisions occur when any amount of the initial kinetic energy is changed into a mechanically non-conserved form of energy such as sound, heat, or vibration. Group of answer choices True False
True. Inelastic collisions are those in which the colliding objects stick together or deform upon impact, resulting in a loss of kinetic energy. During an inelastic collision, some or all of the initial kinetic energy is converted into other forms of energy, such as sound, heat, or vibration.
This is because the collision results in a deformation of the objects, causing them to absorb energy in the form of internal forces. In contrast, in a perfectly elastic collision, the colliding objects bounce off each other with no loss of kinetic energy. The conservation of kinetic energy is an important concept in physics, and it applies to elastic collisions. However, inelastic collisions violate the principle of conservation of kinetic energy because the total amount of kinetic energy before and after the collision is not conserved due to the conversion into non-mechanical forms of energy.
This energy transformation leads to a decrease in the overall kinetic energy of the system. Although the total energy (including kinetic, potential, and internal) is still conserved, the mechanical energy, which includes only kinetic and potential energy, is not conserved in inelastic collisions.
For more information on kinetic energy see:
https://brainly.com/question/26472013
#SPJ11
Reverberation time of a room can be increased by covering the walls with better reflectors of sound. Group of answer choices True False
True, the reverberation time of a room can be increased by covering the walls with better reflectors of sound.
Reverberation time is the time it takes for sound to decay by 60 decibels in a closed space. It is influenced by the size of the room, the materials used on the walls, floor, and ceiling, and the objects present in the room. Better reflectors of sound have a higher sound reflection coefficient, meaning they do not absorb sound as effectively and allow it to bounce around the room for a longer period.
To increase the reverberation time, you can cover the walls with materials that have a high sound reflection coefficient, such as glass, tile, or metal. These materials will reflect sound waves more efficiently, allowing them to travel longer distances and bounce off surfaces multiple times before dissipating.
This results in an increased reverberation time, making the room feel more lively and spacious. However, it is essential to find a balance between sound reflection and absorption to ensure optimal acoustics. Too much reverberation can lead to poor sound quality and difficulty in understanding speech, while too little can make a room feel lifeless and dull.
To know more about reverberation time, visit:
https://brainly.com/question/28029112
#SPJ11
lue whales apparently communicate with each other using sound of frequency 17.0 Hz , which can be heard nearly 1000 away in the ocean. What is the wavelength of such a sound in seawater, where the speed of sound is 1531 m/s
The wavelength of a sound with a frequency of 17.0 Hz in seawater, where the speed of sound is 1531 m/s, is approximately 90.06 meters. This means that the distance between each peak in the sound wave is about 90 meters.
To find the wavelength of a sound wave, we can use the formula:
Wavelength=[tex]\frac{speed of sound}{frequency}[/tex]
In this case, the frequency is given as 17.0 Hz and the speed of sound in seawater is 1531 m/s. So we can plug in these values and calculate the wavelength:
Wavelength=[tex]\frac{1531 m/s}{17.0 Hz}[/tex]= 90.06 meters
Therefore, the wavelength of a sound with a frequency of 17.0 Hz in seawater is approximately 90 meters. This long wavelength allows the sound to travel far distances in the ocean and be heard by other blue whales that are nearly 1000 meters away.
To know more about wavelength visit:
https://brainly.com/question/12103547
#SPJ11
Unequal surface heating that causes localized pockets of air (thermals) to rise because of their buoyancy is termed
The phenomenon you are describing is called thermal convection.
Thermal convection occurs when there is uneven heating of a surface, which causes pockets of air to rise due to their buoyancy. This process is commonly observed in the atmosphere, where solar radiation heats the ground unevenly, creating thermal updrafts that can lead to the formation of clouds and other weather phenomena. The rising air cools as it gains altitude, eventually reaching a point where it can no longer rise and begins to spread out, creating horizontal currents in the atmosphere. These currents can have important implications for weather forecasting, as they can transport moisture and heat over long distances and affect the behavior of storms and other weather systems.
learn more about thermal convection
https://brainly.com/question/9382711
#SPJ11
Very far from earth (at R=[infinity]), a spacecraft has run out of fuel and its kinetic energy is zero. If only the gravitational force of the earth were to act on it (i.e., neglect the forces from the sun and other solar system objects), the spacecraft would eventually crash into the earth. The mass of the earth is Me and its radius is Re. Neglect air resistance throughout this problem, since the spacecraft is primarily moving through the near vacuum of space.
Now find the spacecraft's speed when its distance from the center of the earth is R=αRe, where the coefficient α≥1. Express the speed in terms of se and α.
At any point in the spacecraft's trajectory, its total mechanical energy is given by the sum of its kinetic energy and potential energy due to the gravitational force from the earth:
E = KE + PE = (1/2)mv^2 - G(ME*m)/R
where m is the mass of the spacecraft, v is its speed, G is the gravitational constant, and R is the distance from the center of the earth. Since the spacecraft has zero kinetic energy and is very far from the earth initially, its total energy at that point is just its potential energy at infinity:
E = 0 - G(ME*m)/infinity = 0
As the spacecraft approaches the earth, its distance R decreases and its potential energy becomes more negative. At any distance R, we can rearrange the energy equation to solve for the speed v:
v = sqrt(2G(MEm)/R - 2G(MEm)/infinity)
Note that the second term in the square root is zero, since the potential energy at infinity is defined as zero. Now, we can plug in R = αRe and simplify:
v = sqrt(2G(MEm)/[αRe]) = sqrt(2G(MEm)/Re) * 1/sqrt(α)
Using the value for the standard gravitational parameter of the earth, μ = GM/Re^2, we can rewrite this as:
v = sqrt(2μ/Re) * 1/sqrt(α)
Therefore, the speed of the spacecraft when its distance from the center of the earth is R = αRe is given by the above equation, in terms of the standard gravitational parameter of the earth, the earth's radius, and the coefficient α.
Learn more about energy here:
https://brainly.com/question/1932868
#SPJ11
A 6.0 A current is set up in a circuit for 8.3 min by a rechargeable battery with a 9.0 V emf. By how much is the chemical energy of the battery reduced
If a 6.0 A current is set up in a circuit for 8.3 min by a rechargeable battery with a 9.0 V emf, the reduction in chemical energy of the battery is 2,851.8 J.
To calculate the reduction in chemical energy of the battery, we need to use the formula:
ΔE = VIt
where ΔE is the change in energy, V is the voltage (emf) of the battery, I is the current flowing through the circuit, and t is the time for which the current flows.
Plugging in the given values, we get:
ΔE = (9.0 V)(6.0 A)(8.3 min x 60 s/min)
ΔE = 2,851.8 J
Therefore, the reduction in chemical energy of the battery is 2,851.8 J.
More on chemical energy: https://brainly.com/question/13255204
#SPJ11
Which procedure should be followed by a pilot who is circling to land in a Category B airplane, but is maintaining a speed 5 knots faster than the maximum specified for that category
The pilot should immediately reduce the speed to the maximum specified for the category to ensure the safety of the flight. The pilot should also adjust the airplane's altitude and heading to maintain a stable approach path and touchdown point.
The pilot should follow the appropriate procedure as outlined in the airplane's operating manual. If pilot is circling to land in a Category B airplane but is maintaining a speed 5 knots faster than the maximum specified for that category.
The pilot should also adjust the airplane's altitude and heading to maintain a stable approach path and touchdown point. The pilot should communicate with air traffic control and follow their instructions to ensure proper sequencing with other traffic. Additionally, the pilot should remain vigilant and monitor the airplane's systems and
instruments to ensure that the airplane is operating within its limits and that the flight remains safe and under control. Following these procedures will help ensure a safe and successful landing.
To learn more about : Altitude
https://brainly.com/question/26477184
#SPJ11
Light traveling in air enters a material at an angle of 40 degrees with respect to the normal. The refracted beam in the material makes an angle of 19 degrees with respect to the normal. Calculate the index of refraction of the material.
The index of refraction of the material is approximately 1.47.
To calculate the index of refraction of the material, we can use Snell's Law, which states that n1 sinθ1 = n2 sinθ2, where n1 and n2 are the indices of refraction of the initial and final materials, respectively, and θ1 and θ2 are the angles of incidence and refraction with respect to the normal.
Plugging in the given values, we get n1 sin(40) = n2 sin(19). Assuming n1 = 1 (since the light is traveling in air), we can solve for n2 and get n2 ≈ 1.47.
Therefore, the index of refraction of the material is approximately 1.47.
For more such questions on refraction, click on:
https://brainly.com/question/27932095
#SPJ11
A model electric train requires 6.7367 V to operate. If the primary coil of its transformer has 180.294 turns windings, how many windings should the secondary have if the primary is connected to a 108.246 V household circuit
The secondary coil should have approximately 11.19 windings to provide the 6.7367 V required by the electric train when connected to a 108.246 V household circuit.
To determine the number of windings in the secondary coil of the transformer, we can use the formula for transformer voltage:
[tex]V_{secondary}/V_{primary}=N_{secondary}/N_{primary}[/tex]
where V_secondary is the voltage across the secondary coil, V_primary is the voltage across the primary coil, N_secondary is the number of windings in the secondary coil, and N_primary is the number of windings in the primary coil.
We are given that the primary coil has 180.294 windings and is connected to a 108.246 V household circuit. We also know that the electric train requires 6.7367 V to operate. Therefore, we can set up the equation:
[tex]\frac{V_{secondary}}{108.246\text{ V}} = \frac{N_{secondary}}{180.294}[/tex]
Solving for N_secondary, we get:
[tex]N_{secondary} = \frac{V_{secondary}}{108.246\text{ V}} \times 180.294[/tex]
We can substitute the voltage required by the train, V_secondary = 6.7367 V, into this equation and solve for N_secondary:
[tex]N_{secondary} = \frac{6.7367\text{ V}}{108.246\text{ V}} \times 180.294[/tex]
N_secondary ≈ 11.19
To learn more about circuit
https://brainly.com/question/27206933
#SPJ4
g What inductance is needed in series with a 4.7-μF capacitor so the circuit will oscillate at a frequency of 10 kHz?
To determine the required inductance, we can use the formula for the resonant frequency of an LC circuit:
f = 1 / (2π√(LC))
where f is the desired frequency (10 kHz), C is the capacitance (4.7 μF), and L is the unknown inductance. Solving for L, we get:
L = 1 / (4π^2f^2C)
Plugging in the given values, we get:
L = 1 / (4π^2 × 10,000^2 × 4.7 × 10^-6) ≈ 7.23 mH
Therefore, an inductance of approximately 7.23 mH is needed in series with the 4.7-μF capacitor for the circuit to oscillate at a frequency of 10 kHz.
To find the inductance needed in series with a 4.7-μF capacitor for the circuit to oscillate at a frequency of 10 kHz, you can use the formula for resonant frequency in an LC circuit:
f = 1 / (2 * π * √(L * C))
where f is the frequency, L is the inductance, and C is the capacitance. Rearrange the formula to solve for L:
L = 1 / (4 * π^2 * f^2 * C)
Substitute the given values:
L = 1 / (4 * π^2 * (10,000 Hz)^2 * 4.7 * 10^-6 F)
L ≈ 1.131 * 10^-3 H
So, the inductance needed is approximately 1.131 mH.
To know more about frequency visit:-
https://brainly.com/question/5102661
#SPJ11
g A full discharged capacitor is connected to a 5.0 V supply and charged for 3.0 time constants and then discharged for 2.0 time constants. The approximate capacitor voltage after 5.0 time constants is
The approximate capacitor voltage after a fully discharged capacitor is connected to a 5.0 V supply and charged for 3.0 time constants and then discharged for 2.0 time constants is 0.14 V.
To determine the approximate capacitor voltage after 5.0 time constants, after charging for 3.0 time constants, the capacitor voltage is approximately:
Vc = V(1 - [tex]e^{(-3)}[/tex]) ≈ 0.95V, where V = 5.0 V.
After discharging for 2.0 time constants, the capacitor voltage is approximately:
Vc = 0.95V × [tex]e^{(-2)}[/tex]
≈ 0.14V
So, the approximate capacitor voltage after 5.0 time constants is about 0.14 V.
Learn more about capacitor: https://brainly.com/question/13592820
#SPJ11
An electron is trapped within a sphere whose diameter is m (about the size of the nucleus of a medium sized atom). What is the minimum uncertainty in the electron's momentum
The minimum uncertainty in the electron's momentum is approximately 5.28 x [tex]10^{-20[/tex] kg m/s.
Δx = m
To find the minimum uncertainty in the momentum, we can rearrange the Heisenberg Uncertainty Principle equation:
Δp ≥ h/4πΔx
Substituting the values, we get:
Δp ≥ h/4πm
Using the value of the Planck constant h = 6.626 x [tex]10^{-34[/tex]Joule seconds, we get:
Δp ≥ (6.626 x [tex]10^{-34[/tex] J s) / (4πm)
Assuming the diameter of the sphere is m = [tex]10^{-14[/tex] meters (which is approximately the size of a typical atomic nucleus), we get:
Δp ≥ (6.626 x [tex]10^{-34[/tex] J s) / (4π x [tex]10^{-14[/tex] m) ≈ 5.28 x [tex]10^{-20[/tex] kg m/s
Momentum is a concept in physics that refers to the quantity of motion possessed by an object. It is defined as the product of an object's mass and velocity, and is represented by the symbol "p". In other words, momentum describes how difficult it is to stop an object that is moving. Momentum is a vector quantity, which means it has both magnitude and direction.
The direction of momentum is the same as the direction of the object's velocity. The magnitude of momentum can be calculated by multiplying the object's mass by its velocity. According to the law of conservation of momentum, the total momentum of a closed system remains constant if no external forces act on it. This means that if two objects collide, the total momentum of the system before the collision is equal to the total momentum after the collision.
To learn more about Momentum visit here:
brainly.com/question/30677308
#SPJ4
An astronomer is observing a single star (and one which does not vary) which she knows is located about 30 light-years away. What was the most likely method she or her colleagues used to obtain that distance
The most likely method the astronomer or her colleagues used to obtain the distance of the single star located about 30 light-years away is the parallax method.
Parallax is a method used to measure the distance to nearby stars.The parallax method involves measuring the apparent shift in a star's position when observed from two different points in Earth's orbit around the Sun. This apparent shift, or parallax angle, can be used to calculate the distance to the star using trigonometry. The parallax method is particularly accurate for stars within a few hundred light-years of Earth.
In this scenario, the astronomer likely used the parallax method to determine that the single star is about 30 light-years away. This technique is widely used and effective for measuring distances to relatively nearby stars.
To know more about parallax, click here
https://brainly.com/question/31734825
#SPJ11
Two coils are placed close together in a physics lab to demonstrate Faraday's law of induction. A current of 7.00 A in one is switched off in 1.10 ms, inducing a 7.00 V emf in the other. What is their mutual inductance (in mH)
To solve this problem, we can use Faraday's law of induction, which states that the emf induced in a coil is proportional to the rate of change of magnetic flux through the coil. The formula for this is:
emf = - M × dI/dt
where emf is the induced emf, M is the mutual inductance between the two coils, I is the current in one coil, and dt is the time interval over which the current changes.
We are given that the current in one coil is switched off in 1.10 ms, and this induces a 7.00 V emf in the other coil. We also know that the current in the first coil is 7.00 A. Therefore, we can plug these values into the equation above and solve for M:
7.00 V = -M × (7.00 A / 1.10 ms)
Simplifying this equation, we get:
M = -(7.00 V) / ((7.00 A / 1.10 ms))
M = -11.0 mH
Therefore, the mutual inductance between the two coils is -11.0 mH (note that the negative sign indicates that the emf induced in the second coil is in the opposite direction to the change in current in the first coil).
To know more about Faraday's law of induction, visit:
https://brainly.com/question/13369951
#SPJ11