Sylvia and Jadon now want to work a problem. Imagine a puck of mass 0.5 kg moving as in the simulation. Suppose that the tension in the string is 1.0 N, and that the radius of its circular path is 0.8 m. What will Jadon and Sylvia find for the tangential speed of the puck

The reading on the other bathroom scale is 300 N. This means that one scale is showing a force of 500 N while the other scale is showing a force of 300 N, with the total force (800 N) being supported by both scales together. This situation can arise when the woman is not standing symmetrically on both scales, causing one scale to bear more weight than the other.

If an 800-N woman stands at rest on two bathroom scales and one scale shows a reading of 500 N, we can use the principle of action and reaction to find the reading on the other scale.

According to the principle of action and reaction, the force exerted by the woman on the scales is equal and opposite to the force exerted by the scales on the woman. Therefore, the total force exerted by the woman on both scales is 800 N, and the force exerted by the scale that shows a reading of 500 N is 500 N.

Let F be the force exerted by the other scale. The total force exerted by the woman on both scales can be expressed as:

800 N = F + 500 N

Solving for F, we get:

F = 800 N - 500 N = 300 N

The reading on the other bathroom scale is 300 N.

For such more questions on Force:

https://brainly.com/question/30015989

#SPJ11

The minimum wavelength of the resulting X-rays is 0.509 nm.

The minimum wavelength of the resulting X-rays can be found using the equation:

λ_min = hc / E_photon

where λ_min is the minimum wavelength of the X-rays, h is Planck's constant, c is the speed of light, and E_photon is the energy of a single photon.

To find the energy of a single photon, we can use the fact that the potential difference (V) through which the proton is accelerated is related to its final kinetic energy (K) by:

K = eV

where e is the elementary charge. The energy of a single photon is equal to the kinetic energy of the proton, since all of the proton's energy is transferred to the photon upon impact:

E_photon = K = eV

Substituting this expression into the equation for λ_min, we get:

λ_min = hc / eV

Plugging in the values for the constants, and the potential difference given in the problem, we get:

λ_min = (6.626 × 10^-34 J s)(2.998 × 10^8 m/s) / (1.602 × 10^-19 C)(3.90 kV)

Simplifying this expression, we get:

λ_min = 0.509 nm

to know more about Protons please visit

https://brainly.com/question/31802800

#SPJ11

In the photoelectric effect, the maximum kinetic energy of the electrons ejected from the metal increases when the frequency of the incident light increases.

The photoelectric effect is a phenomenon where electrons are emitted from a metal surface when it is exposed to electromagnetic radiation, specifically light with sufficient energy. This process can be explained by the quantum theory of light, which states that light consists of packets of energy called photons. The energy of a photon is directly proportional to its frequency, as described by the equation E = hν, where E is the energy, h is Planck's constant, and ν is the frequency of the light.

When the frequency of the incident light is increased, the energy of the photons also increases. If the energy of the incoming photons is greater than the metal's work function (the minimum energy required to eject an electron), the electrons absorb the energy and are ejected from the metal surface. The remaining energy is converted into kinetic energy for the ejected electrons, leading to an increase in their maximum kinetic energy.

In summary, the maximum kinetic energy of electrons in the photoelectric effect is dependent on the frequency of the incident light. When the frequency of the light increases, the energy of the photons increases, and if it surpasses the metal's work function, the electrons are emitted with a higher kinetic energy.

Know more about Photoelectric effect here :

brainly.com/question/1359033

#SPJ11

The force exerted by the magnetic field of the current on the moving electron is approximately -5.57 x 10⁻¹⁵ N in along, straight wire carries a current of 13.4 A. An electron travels at 59600 m/s parallel to the wire, 46 cm from the wire.

The force exerted by the magnetic field of the current on the moving electron can be calculated using the following formula:
F = q * v * B
where F is the force, q is the charge of the electron, v is the velocity of the electron, and B is the magnetic field due to the current in the wire.
1. Calculate the magnetic field (B) using Ampere's Law:
[tex][tex]B= \frac{(μ₀ * I)}{(2 * \pi  * r)}[/tex][/tex]
where μ₀ is the permeability of free space[tex](4\pi  *10T^{-7}  m/A)[/tex], I is the current in the wire (13.4 A), and r is the distance from the wire (0.46 m).
[tex]B=\frac{(4\pi  * 10^{-7}   T m/A * 13.4 A)}{(2 * \pi  * 0.46 m)}[/tex]
B ≈ 5.83 * 10^{⁻⁶} T
2. Calculate the force (F) exerted on the electron:
The charge of an electron (q) is approximately [tex]-1.6 * 10^{-19}  C[/tex], and its velocity (v) is given as 59600 m/s. Now, plug these values into the formula:
F = q * v * B
[tex]F = (-1.6 * 10^{-19} C) * (59600 m/s) * (5.83 * 10^{-6}  T)[/tex]
F ≈ -5.57 x 10⁻¹⁵ N
The force exerted by the magnetic field of the current on the moving electron is approximately -5.57 x 10⁻¹⁵ N.

For more information on magnetic field kindly visit to

https://brainly.com/question/12876829

#SPJ11

The torque acting on the angular simple harmonic oscillator is -62.4 N.m in equilibrium position.

The dot product of the force and the angular displacement of the force application point is used to compute the work done by the force. It is equivalent to the change in the body's kinetic energy during rotation.

By drawing an analogy from the work done by force, it is possible to compute the work done by a torque.

To calculate the torque for an angular simple harmonic oscillator, you can use the following formula:
τ = -k
Torque (τ) = -torsion constant (k) × angular displacement (θ)
In this case, the torsion constant (k) is 1200 N.m/rad, and the angular displacement (θ) is 5.2 x 10⁻² rad. Plugging these values into the formula:
τ = -1200 N.m/rad × 5.2 x 10⁻² rad
τ = -62.4 N.m
The negative sign indicates that the torque is acting in the opposite direction of the angular displacement, trying to restore the oscillator to its equilibrium position.

Learn more about torque here

https://brainly.com/question/29024338

#SPJ11

The flux density of radiation emitted from the top of Jupiter's atmosphere that is generated internally by processes in the planet is approximately 0.34 W/m2.

To estimate the flux density of radiation emitted from the top of Jupiter's atmosphere, we first need to calculate its effective temperature. We know that the observed equivalent blackbody temperature of Jupiter is 20 K higher than the effective temperature, so we can calculate the effective temperature by subtracting 20 K from the observed temperature.

The observed temperature of Jupiter can be estimated using the Stefan-Boltzmann law, which states that the flux density of radiation emitted by a blackbody is proportional to the fourth power of its temperature. Using the radius and albedo of Jupiter, we can calculate the amount of solar energy absorbed by the planet, and then use this to estimate its temperature.

Using the formula for the flux density of solar radiation at Jupiter's distance from the Sun, we find that the amount of solar energy absorbed by Jupiter is about 52.8 W/m2. Assuming that Jupiter is in a steady state and that it emits the same amount of energy as it absorbs, we can set the flux density of radiation emitted by Jupiter equal to the flux density of solar radiation absorbed:

σTeff^4 = 52.8 W/m2

where σ is the Stefan-Boltzmann constant.

Solving for Teff, we get:

Teff = (52.8/σ)^1/4 = 110.8 K

The observed equivalent blackbody temperature of Jupiter is 20 K higher than this, so the observed temperature is:

Tobs = Teff + 20 K = 130.8 K

Finally, we can use the Stefan-Boltzmann law again to estimate the flux density of radiation emitted from the top of Jupiter's atmosphere. We know that the flux density is proportional to the fourth power of the temperature, so we can write:

σTobs^4 = F/A

where F is the total energy emitted by Jupiter, and A is the surface area of Jupiter's atmosphere. We can assume that the energy is emitted uniformly over the surface of the planet, so we can use the formula for the surface area of a sphere:

A = 4πR^2

where R is the radius of Jupiter.

Substituting the values we know, we get:

σ(130.8 K)^4 = F/(4π(69,900 km)^2)

Solving for F, we get:

F = σ(130.8 K)^4 × 4π(69,900 km)^2 = 1.13 × 10^17 W

Dividing by the surface area of Jupiter's atmosphere, we get the flux density:

F/A = (1.13 × 10^17 W)/(4π(69,900 km)^2) = 0.34 W/m2

learn more about flux density here:

https://brainly.com/question/29119253

#SPJ11

On a planet, an astronaut determines the acceleration of gravity using a 1-meter long pendulum with a period of 1.5 seconds: the acceleration of gravity on the planet is approximately 17.56 meters per second squared.

To find the acceleration of gravity in meters per second squared, we can use the formula for the period of a simple pendulum:

T = 2π√(L/g),

where T is the period, L is the length of the pendulum, and g is the acceleration of gravity. Given the period T=1.5 seconds and the length L=1 meter, we can rearrange the formula to solve for g:

g = (4π²L)/T².

Substituting the given values:

g = (4π²(1))/(1.5²)

g ≈ 17.56 meters per second squared.

Therefore, the acceleration of gravity on the planet is approximately 17.56 meters per second squared.

To know more about acceleration, refer here:

https://brainly.com/question/28743430#

#SPJ11

When the magnitude of force applied on a stationary body becomes greater and greater, the magnitude of the opposing friction force also increases to a certain critical point. At that point, the friction force present is termed friction.

The magnitude of the opposing friction force between the surfaces depends on several factors, including the nature of the surfaces, the normal force pressing them together, and the coefficient of friction.

When the applied force on the body increases gradually, the friction force also increases in response.

However, there is a limit to the amount of friction that can be exerted on the body. This limit is reached when the magnitude of the applied force reaches a certain critical point. At this critical point, the friction force is at its maximum value and is termed the maximum static friction force.

The maximum static friction force is determined by the coefficient of static friction and the normal force between the surfaces. It represents the maximum amount of force that can be exerted parallel to the surface of contact before the body starts moving or experiences impending motion.

If the applied force exceeds the maximum static friction force, the body will overcome the static friction and start to move.

It is important to note that once the body starts moving, the opposing friction force transitions from static friction to kinetic friction, which is generally lower than the maximum static friction force.

The kinetic friction force remains relatively constant as long as the relative motion between the surfaces continues.

In summary, the magnitude of the opposing friction force increases with the applied force until it reaches a certain critical point known as the maximum static friction force.

At this point, the friction force is at its maximum value, and further increase in the applied force will result in the body overcoming static friction and initiating motion.

To learn more about force, refer below:

https://brainly.com/question/30507236

#SPJ11

The ratio of the length of the spacecraft as viewed through a telescope on Earth to its length when measured after landing on Earth is approximately 0.748.

This question involves the concept of length contraction in special relativity. When an object is moving at a significant fraction of the speed of light relative to an observer, its length appears to be contracted along the direction of motion. The formula for length contraction is:

[tex]L' = L * \sqrt{\frac{ 1 - v^2}{c^2} }[/tex]

where L' is the contracted length, L is the proper length (length measured when at rest), v is the relative velocity, and c is the speed of light.

In this case, the spacecraft is moving at a speed of 0.650c relative to Earth. To find the ratio of the lengths, we'll divide the contracted length (L') by the proper length (L):

Ratio = L' / L

First, we need to find L':

[tex]L' = L * \sqrt{(0.5775)  }[/tex]

Now, we can find the ratio:

[tex]Ratio =\frac{ (L * \sqrt(0.5775))}{L}[/tex]

[tex]Ratio =\frac{ (L * \sqrt{(0.5775)})}{L}[/tex]

The L terms cancel out:

Ratio ≈ 0.748

The ratio of the length of the spacecraft as viewed through a telescope on Earth to its length when measured after landing on Earth is approximately 0.748. This means that the spacecraft appears about 74.8% of its proper length when observed from Earth at a speed of 0.650c.  

For more information on spacecraft kindly visit to

https://brainly.com/question/29969483

#SPJ11

The main answer to your question is that the brightness of bulb B is the same as the brightness of bulb A since they both have the same resistance.

To give an explanation, when lightbulbs are connected in series, the same current flows through each bulb.

Since they have the same resistance, they will both use the same amount of energy and emit the same amount of light.

In summary, the brightness of bulb B is not greater or smaller than the brightness of bulb A as they are equal due to the same resistance and same current flowing through them in series.

Learn more about resistance click here:

https://brainly.com/question/17563681

#SPJ11

The atmosphere exerts a pressure on you; however, you do not feel the pressure and you are not crushed by it. This observation is explicable because the pressure inside your body is the pressure inside your body is equal to the atmospheric pressure outside.

The human body is a remarkable system that is capable of maintaining equilibrium with the surrounding environment, including atmospheric pressure. The pressure exerted by the atmosphere, known as atmospheric pressure, is caused by the weight of the air above us.

Inside our bodies, we have various fluids and tissues, including blood, which exert pressure as well. This internal pressure, often referred to as internal or physiological pressure, is balanced and equalized with the external atmospheric pressure. This balance is crucial for our body's proper functioning.

If there were a significant difference between the internal and external pressures, it would lead to discomfort or potential health issues.

For example, if the internal pressure were higher than the external pressure, it could cause blood vessels to rupture or organs to be compressed. On the other hand, if the external pressure were higher, it could lead to the collapse of lungs or other internal structures.

Fortunately, our body's natural mechanisms, such as the circulatory and respiratory systems, work to maintain this balance. The circulatory system regulates blood pressure, while the respiratory system adjusts the air pressure within the lungs to match the atmospheric pressure.

As a result, the pressure inside our bodies remains equal to the atmospheric pressure outside. This balance allows us to exist comfortably without feeling the atmospheric pressure or being crushed by it.

To learn more about pressure, refer below:

https://brainly.com/question/12971272

#SPJ11

The percent loss of mechanical energy per cycle in this damped oscillator is approximately 70%.

To calculate the percent loss of mechanical energy per cycle in the given scenario, we first need to find the number of cycles that occur in one minute.

One cycle of a damped oscillator takes two periods, so in one minute (60 seconds), there are 60/30 = 2 cycles.

Now we can calculate the percent loss of mechanical energy per cycle:

- The percent reduction in amplitude after 1 minute is 30%, which means the amplitude has decreased to 70% of its original value.
- The mechanical energy of a simple harmonic oscillator is proportional to the square of its amplitude. Therefore, the mechanical energy of the damped oscillator after 1 minute is only (0.7)^2 = 0.49, or 49% of its original value.
- Since we have two cycles in one minute, the percent loss of mechanical energy per cycle is the square root of 0.49, which is approximately 0.7 or 70%.

Therefore, the percent loss of mechanical energy per cycle in this damped oscillator is approximately 70%.

Learn more about "mechanical energy": https://brainly.com/question/30403434

#SPJ11

A sound of 40 decibels is 100 times as intense as a sound of 20 decibels.

Decibels (dB) is a logarithmic scale used to measure the intensity of sound. The formula to calculate the intensity ratio between two sounds is:

Intensity Ratio (I1/I2) = 10^((dB1 - dB2)/10)

Where I1 and I2 are the intensities of the two sounds, and dB1 and dB2 are their respective decibel levels.

In this case, dB1 = 40 dB and dB2 = 20 dB. Plugging the values into the formula:

Intensity Ratio = 10^((40 - 20)/10) = 10^(20/10) = 10^2 = 100

So, a sound of 40 decibels is 100 times as intense as a sound of 20 decibels.

To know more about sound visit:

https://brainly.com/question/29707602

#SPJ11

The net torque on each wheel of the bicycle is -0.27 Nm.It is important to note that the negative sign indicates that the torque is in the opposite direction to the motion of the wheel.

To find the net torque on each wheel of a bicycle slowing down with an angular acceleration of -15 rad/s², we can use the formula for torque:

τ = Iα

Where τ is the net torque, I is the moment of inertia, and α is the angular acceleration.

We are given the mass and radius of each wheel as 0.4 kg and 0.3 m, respectively, and the angular acceleration as -15 rad/s². The moment of inertia of a solid cylinder is:

I = 1/2 mr²

Substituting the given values, we get:

I = 1/2 × 0.4 kg × (0.3 m)² = 0.018 kg m²

We can now calculate the net torque using the formula:

τ = Iα

Substituting the given values, we get:

τ = 0.018 kg m² × (-15 rad/s²) = -0.27 Nm.

For such more questions on Net torque:

https://brainly.com/question/14927912

#SPJ11

When a river reaches a base level, its forward velocity rapidly decelerates as it enters a larger body of standing water and a/an delta is formed.

A river reaches its base level when it meets a larger body of water such as a lake or an ocean. At this point, the river loses its gradient and the energy that it once had, causing it to slow down and deposit the sediment it was carrying. This deposition of sediment leads to the formation of a delta, which is a triangular-shaped landform at the mouth of a river.

The sediment builds up over time, creating channels and distributaries that fan out from the main river channel. Deltas are important ecosystems that provide habitat for many species of plants and animals, as well as serve as natural barriers against storm surges and flooding.

For more questions like River click the link below:

https://brainly.com/question/11260945

#SPJ11

When a charged ruler attracts small pieces of paper, the paper pieces become charged by induction. The charged ruler induces a charge of opposite polarity on the side of the paper facing the ruler and a charge of the same polarity on the side facing away from the ruler.

If a piece of paper jumps quickly away after touching the ruler, it may be due to the fact that the charge on the paper is not uniformly distributed. When the paper touches the charged ruler, the charge is transferred between them, and the paper may become charged with a higher concentration of charge in one particular spot.

This concentrated charge creates a strong electric field that interacts with the electric field of the charged ruler. If the electric field of the paper is strong enough, it can overcome the attractive force between the ruler and the paper, causing the paper to jump quickly away.

Learn more about charged by induction

https://brainly.com/question/10254645

#SPJ4

The volume of water displaced by the cargo ship is 882,900 cubic meters.

To calculate the volume of water displaced by the cargo ship, we can use Archimedes' principle which states that the buoyant force acting on an object submerged in a fluid is equal to the weight of the fluid displaced by the object. Therefore, the volume of water displaced by the ship is equal to its weight divided by the density of the fluid.

First, we need to convert the mass of the ship from metric tonnes to kilograms:

1 metric tonne = 1000 kg

Therefore, the mass of the ship in kilograms is:

90000 metric tonnes x 1000 kg/metric tonne = 90,000,000 kg

Next, we can calculate the weight of the ship using the formula:

weight = mass x gravity

where gravity is the acceleration due to gravity, which we can assume to be [tex]9.81 m/s^2.[/tex]

weight = 90,000,000 kg x 9.81 m/s^2 = 882,900,000 N

Finally, we can calculate the volume of water displaced by the ship using the formula:

volume = weight/density

where the density of fresh water is assumed to be [tex]1000 kg/m^3.[/tex]

volume = 882,900,000 N / [tex]1000 kg/m^3 = 882,900 m^3[/tex]

Learn more about weight/density

https://brainly.com/question/28704115

#SPJ4

Mixing 3 liters of water at 20 [tex]^oC[/tex] with 4 liters of water at 40 [tex]^oC[/tex] will result in water with 31.43°C temperature.

The amount of energy in the final mixture will be equal to the sum of the energy in the initial 3 liters of water at 20°C and the energy in the initial 4 liters of water at 40°C.

The total energy in the final mixture:

= energy in 3 liters of 20°C water + energy in 4 liters of 40°C water

= 60 calories + 160 calories

= 220 calories

Total energy = mass of the mixture x specific heat x temperature of the mixture

Therefore, the final temperature of the mixture will be approximately 31.43°C.

More on temperature of mixtures can be found here: https://brainly.com/question/22864976

#SPJ1

The wavelength of a neutron is typically around 0.1 to 0.5 nanometers. Neutron diffraction is a powerful analytical technique used to study the atomic structure of materials.

Neutrons, which are uncharged particles, can interact with the nuclei of atoms in a sample, allowing researchers to determine the positions of atoms in the material. The wavelength of the neutrons used in diffraction experiments is typically around 0.1 to 0.5 nanometers, which is much larger than the wavelength of X-rays used in X-ray diffraction experiments. This makes neutron diffraction particularly useful for studying materials with large unit cells, such as complex organic molecules or minerals. Additionally, neutrons can penetrate through thick samples, making it possible to study materials in situ under a variety of conditions.

Learn more about Neutrons here:

https://brainly.com/question/28992636

#SPJ11

The intensity of the transmitted light is approximately 96.6 W/m².

The intensity of the transmitted light can be found using Malus's Law which states that the intensity of the transmitted light is equal to the incident intensity multiplied by the square of the cosine of the angle between the transmission axis and the polarization direction of the incident light.

Given that the incident light is vertically polarized and has an intensity of 100 W/m2, and the transmission axis of the polarizer is at an angle of 15 degrees with the vertical, we can calculate the intensity of the transmitted light as follows:

cos^2(15) = 0.966

Transmitted intensity = 100 x 0.966 = 96.6 W/m2

Therefore, the intensity of the transmitted light is 96.6 W/m2.

To know more about intensity, visit:

https://brainly.com/question/17583145

#SPJ11

The magnetic flux through the solenoid is approximately 0.0314 Wb, which is closest to option B, 31 mWb.

Magnetic flux is the total magnetic field that travels through a specific location. It is a valuable tool for describing the effects of magnetic force on things in a specific location.

The magnetic flux through a solenoid can be calculated using the formula:

Φ = μ₀n²πr²L I

where Φ is the magnetic flux, μ₀ is the permeability of free space, n is the number of turns per unit length (i.e., the number of turns divided by the length), r is the radius of the solenoid, L is the length of the solenoid, and I is the current.

Plugging in the values given:

n = 800 / 0.5 = 1600 turns/m

r = 0.05 m

L = 0.5 m

I = 10 A

μ₀ = 4π × 10⁻⁷ T·m/A

Φ = (4π × 10⁻⁷ T·m/A) × (1600 turns/m)² × π × (0.05 m)² × 0.5 m × 10 A

Φ ≈ 0.0314 Wb

Therefore, the magnetic flux through the solenoid is approximately 0.0314 Wb, which is closest to option B, 31 mWb.

Learn more about magnetic flux on:

https://brainly.com/question/30922492

#SPJ4

If the back of a person's eye is too close to the lens, this person is suffering from a. nearsightedness,

This is also known as myopia, nearsightedness is a common refractive error that occurs when the eye's length is longer than usual, causing light rays to focus in front of the retina instead of directly on it. As a result, people with nearsightedness can see objects up close clearly, but distant objects appear blurry. Nearsightedness is not related to spherical aberration, astigmatism, or chromatic aberration. Spherical aberration occurs when light rays entering the lens at different distances from the center do not focus at the same point, causing image distortion.

Astigmatism is another refractive error that happens when the cornea or lens has an irregular shape, resulting in blurred vision at all distances. Chromatic aberration is an optical phenomenon in which a lens cannot focus all colors of light at the same point, causing color fringes around objects. Farsightedness, or hyperopia, is the opposite of nearsightedness. In this case, the eye is shorter than normal, causing light rays to focus behind the retina, making it difficult to see nearby objects clearly. So therefore if the back of a person's eye is too close to the lens, this person is suffering from a. nearsightedness,

To learn more about myopia here:

https://brainly.com/question/25676535

#SPJ11

To ensure maximum reflectance of normally incident 530 nm wavelength light in a soap bubble with an index of refraction of 1.33, the minimum thickness of the bubble can be calculated using the formula for the thickness of a thin film that exhibits maximum reflectance:

t = (m + 0.5)λ / (2 * n)

Where:
t = thickness of the film
m = an integer (0, 1, 2, ...)
λ = wavelength of the incident light (530 nm)
n = refractive index of the film (1.33)

Plugging in the values, we get:

t = (m + 0.5) * 530 nm / (2 * 1.33)

To find the minimum thickness that ensures maximum reflectance, we can use the smallest value of m, which is 0. Thus, the minimum thickness is:

t = (0.5) * 530 nm / (2 * 1.33) = 99.62 nm

Therefore, a soap bubble with a minimum thickness of 99.62 nm will ensure maximum reflectance of normally incident 530 nm wavelength light.


1. Recall that maximum reflectance occurs when the optical path difference between the reflected rays is equal to an odd multiple of half the wavelength. This can be represented as:
  (2 * thickness * index of refraction) = (2n + 1) * (wavelength / 2)

2. For minimum thickness, we will use n = 0:
  (2 * thickness * 1.33) = (2(0) + 1) * (530 nm / 2)

3. Solve for thickness:
  thickness = (1 * 530 nm) / (2 * 1.33)

4. Calculate the value:
  thickness ≈ 199.25 nm

to know more about wavelength here:

brainly.com/question/13533093

#SPJ11

When you insert a piece of twisted plastic between a polarizer plate and a computer screen, you will observe a change in the screen's appearance due to the altered orientation of the light waves.

When you hold a polarizer plate in front of a computer screen in an orientation that lets no light through, and then place a piece of twisted plastic between the screen and the polarizer plate, you will see a change in the appearance of the screen.

1. When the polarizer plate is held in front of the computer screen, it filters the light emitted from the screen by allowing only certain orientations of light waves to pass through.

2. By positioning the polarizer in a way that lets no light through, you are essentially blocking all light waves from the screen that are not aligned with the polarizer's axis.

3. When you place a piece of twisted plastic between the polarizer plate and the screen, the twisted plastic acts as a wave plate. This means that it alters the orientation of the light waves passing through it.

4. As the twisted plastic changes the orientation of the light waves, some of these waves will now align with the polarizer's axis, allowing them to pass through the polarizer and be visible to your eyes.

5. The appearance of the screen will change as the twisted plastic alters the orientation of the light waves. You may observe various colors and patterns on the screen, depending on the specific properties of the twisted plastic and the polarizer.

In summary, when you insert a piece of twisted plastic between a polarizer plate and a computer screen, you will observe a change in the screen's appearance due to the altered orientation of the light waves passing through the twisted plastic and the polarizer.

Learn more about polarization at: https://brainly.com/question/29332653

#SPJ11

When a light wave leaves a region of strong gravity, it is affected by the gravitational force of the object it is passing near. This means that the light wave will experience a redshift, or a stretching of its wavelength.

This is because the gravity of the object causes a distortion in spacetime, which affects the path of the light wave. On the other hand, a light wave leaving a spaceship in empty space would not experience any gravitational distortion and would not be affected in the same way.

In other words, the light wave leaving the region of strong gravity would have a longer wavelength and lower frequency compared to the same wave leaving the spaceship in empty space. This effect is known as gravitational redshift and is a key prediction of Einstein's theory of general relativity.
When a light wave leaves a region of strong gravity, such as near a massive object, compared to the same wave leaving a spaceship in empty space, the wave in strong gravity will have a longer wavelength and lower frequency.

This phenomenon is called gravitational redshift. It occurs because the strong gravitational field causes time to dilate, stretching the light wave and decreasing its energy. Conversely, in empty space with weaker gravity, the light wave maintains its original wavelength and frequency, as it does not experience significant time dilation or energy loss.

To know more about  light wave visit:

brainly.com/question/23460034

#SPJ11

The magnetic force on a current-carrying wire in a magnetic field can be calculated using the formula F = BIL, where F is the magnetic force, B is the magnetic field, I am the current, and L is the length of the wire. In this case, the wire is perpendicular to the magnetic field, so we can simplify the equation to F = BIL. F = 0.075 N

The magnetic force on the wire carrying a current of 0.25 A and perpendicular to a magnetic field of 0.6 T is 0.075 N. It is important to note that the direction of the magnetic force is perpendicular to both the direction of the current and the direction of the magnetic field. To find the magnetic force on a wire carrying a current in a perpendicular magnetic field, we can use the following formula Magnetic Force (F) = Current (I) × Length of wire (L) × Magnetic Field (B) × sin(θ)
Here, θ is the angle between the current direction and the magnetic field. Since the wire is perpendicular to the magnetic field, the angle θ is 90 degrees. The sine of a 90-degree angle is 1, so sin(θ) = 1. Current (I) = 0.25 A Length of wire (L) = 0.5 m Magnetic Field (B) = 0.6 T Magnetic Force (F) = (0.25 A) × (0.5 m) × (0.6 T) × sin (90°) F = (0.25 A) × (0.5 m) × (0.6 T) × 1 F = 0.075 N The magnetic force on the wire is 0.075 N.

learn more about magnetic here.

https://brainly.com/question/15606208

#SPJ11

1.56% of the stored energy in the cloud is dissipated during the lightning strike.

To calculate the fraction of the stored energy dissipated during a lightning strike, we need to assume a value for the initial charge stored in the cloud (Q0). Let's assume that the initial charge in the cloud is Q0 = 100 CC.

The energy stored in the cloud can be calculated using the formula:

E = (1/2) * C * V^2,

where C is the capacitance of the cloud and V is the voltage across the cloud. Since we don't have specific values for C and V, we'll focus on the fraction of energy dissipated.

The fraction of the stored charge transferred during the lightning strike is given as:

Fraction = [tex]Q / Q0[/tex],

where Q is the charge transferred, which is 12.5 CC in this case.

Fraction = 12.5 CC / 100 CC,

Fraction = 0.125.

This means that 12.5% of the initial charge stored in the cloud is transferred during the lightning strike.

Since energy is directly proportional to the square of the charge ([tex]E ∝ Q^2[/tex]), the fraction of the stored energy dissipated is:

Fraction of energy dissipated = (Fraction)^2,

Fraction of energy dissipated = (0.125)^2,

Fraction of energy dissipated = 0.0156.

Therefore, approximately 1.56% of the stored energy in the cloud is dissipated.

To learn more about energy, refer below:

https://brainly.com/question/1932868

#SPJ11

Weight of water displaced = -6.358 N. The smallest density of a liquid in which the rock will float is greater than the density of water.

First, we need to calculate the weight of the rock. We know that weight (W) is equal to mass (m) multiplied by the acceleration due to gravity (g).

W = mg

W = 1.80 kg x 9.81 m/s²

W = 17.658 N

When the rock is totally immersed in water, the tension in the string is 11.3 N. This means that the buoyant force (Fb) acting on the rock is equal to the weight of the water displaced by the rock.

Fb = weight of water displaced

We can use Archimedes' principle to calculate the weight of the water displaced. Archimedes' principle states that the buoyant force on an object is equal to the weight of the fluid displaced by the object.

Fb = ρVg

where ρ is the density of the fluid, V is the volume of the fluid displaced, and g is the acceleration due to gravity.

We can rearrange this equation to solve for the density of the fluid:

ρ = Fb / Vg

We know that the weight of the water displaced is equal to the tension in the string minus the weight of the rock:

weight of water displaced = tension in string - weight of rock

weight of water displaced = 11.3 N - 17.658 N

weight of water displaced = -6.358 N

This negative weight indicates that the rock is too heavy to float in water. Therefore, the smallest density of a liquid in which the rock will float is greater than the density of water.

To know more about tension, refer

https://brainly.com/question/24994188

#SPJ11

The induced emf is -0.7205 V, calculated using Faraday's Law and the given values of magnetic field and instantaneous rate of radius change.

EMF (electromotive force) is the voltage or potential difference generated by a source, such as a battery or generator, that drives an electric current through a circuit. It is measured in volts (V).

Faraday's Law of Electromagnetic Induction states that the emf induced in a conductor is proportional to the rate of change of the magnetic field through the conductor.

According to the given information:

The induced emf in the loop can be calculated using Faraday's Law of Electromagnetic Induction, which states that the induced emf is equal to the rate of change of magnetic flux through the loop.

The magnetic flux through the loop is given by:

Φ = BAcosθ

where B is the magnetic field, A is the area of the loop, and θ is the angle between the magnetic field and the normal to the loop. In this case, since the loop is perpendicular to the magnetic field, θ = 0 and cosθ = 1.

The area of the loop is given by:

A = π*r^2

where r is the radius of the loop.

The rate of change of the area is given by:

(dA/dt) = 2πr*(dr/dt)

where (dr/dt) is the instantaneous rate at which the radius is decreasing.

Substituting these equations into Faraday's Law, we get:

emf = -dΦ/dt = -BdA/dt = -B2πr*(dr/dt)

Substituting the given values, we get:

emf = -0.900 T * 2π * 18.0 cm * (-64.0 cm/s)

emf = 720.5 mV

Therefore, the induced emf in the loop at that instant is 720.5 mV.

To know more about faraday law,emf visit:

https://brainly.com/question/14996374

#SPJ11