The use of ethanol instead of acetic acid is not the wise choice.
Why use of ethanol instead of acetic acid is not the wise choice?When you are out of acetic acid and decide to use ethanol as the solvent in the transformation, it would not be a wise choice because acetic acid and ethanol are two totally different chemicals. Due to different in features, it can't act the same and the desirable results can't be observed.
So we can conclude that use of ethanol instead of acetic acid is not the wise choice.
Learn more about solvent here: https://brainly.com/question/25326161
To use ethanol in place of acetic acid as a solvent in the transformation of 3 into 4, is not a wise choice.
What are functional groups?Functional groups are the specific groups which after attaching to any molecule changes the property of the molecule.
Acetic acid has carboxylic (-COOH) group as functional group and ethanol has hydroxyl (-OH) functional group and both has different properties from each other. So use to ethanol in place of acetic acid is not correct as it will not fulfill the requirements of acid.
Hence use of ethanol in place of acetic acid is not a wise choice.
To know more about functional groups, visit he below link:
https://brainly.com/question/6028840
#SPJ4
A 100g block of pine wood has a volume of 300 cm3. Would this block float on water (density of water is 1.0 g/cm3)?
A 120g block of pinewood has a volume of 300cm3. Would this block float on water? (HINT: Water has a density of 1g/cm3). a. No, because the block is denser than water.
Also here's a free meme
The density of a material represents the denseness of that material in a specific given area. If an object has a density less than water then it will float on water otherwise it will sink. Here the wood will float on water.
What is density?The density of a material denotes the measurement which compares the amount of matter an object has to its volume. An object with more matter in a certain volume has a high density. It is defined as the mass per unit volume.
The density is usually represented by symbol ρ or by the letter D. The formula used to calculate the density is:
Density = Mass / Volume
D = 100 / 300 = 0.33 g/cm³
Here the density of water is 1.0 g/cm³ which is greater than the density of pine wood. So the pine wood will float on water.
To know more about density, visit;
https://brainly.com/question/29775886
#SPJ2
Constance has an apple that weighs 85,000 milligrams and a peach that weighs 0.15 kilograms. which fruit has the greater mass? choose the words and numbers to complete the statements. convert the masses of both fruits to the same unit. 85,000 milligrams is the same as choose... grams. 0.15 kilograms is the same as choose... grams. the choose... has the greater mass.
The fruit which has the greater mass is peach i.e. 150 grams.
What is mass?Mass is a quantity which is used to define that what amount of substance will occupy any space or present in the given object.
We have given,
Weight of apples = 85,000 mg
Weight of peach = 0.15 kg
To compare the quantity first we have to convert both of these units in the same unit, and we know that:
In 1 kilogram = 1000 grams
And in 1 grams = 1000 milligrams
So, we convert both the units into grams as:
85,000 mg = 85,000 / 1000 = 85 grams
0.15 kg = 150 grams
So, the mass of peach is high.
Hence, peach has the greater mass.
To know more about mass, visit the below link:
https://brainly.com/question/15526412
Answer:
Constance has an apple that weighs 85,000 milligrams and a peach that weighs 0.15 kilograms. Which fruit has the greater mass? Choose the words and numbers to complete the statements.
Convert the masses of both fruits to the same unit.
85,000 milligrams is the same as
85
grams.
0.15 kilograms is the same as
150
grams.
The
peach
has the greater mass.tion:
Water is a ______ molecule and the bond between the h-o is a __ ______ bond.
i know the last 2 is polar covalent bond but i don't know
the first blank.
Answer: polar molocule
Explanation:
How to tell if a reaction is double bond or single
Answer:
Single replacement is a reaction in which one element reacts with another compund to form another compound and another element.
planation:
If the reaction is double displacement then two molecules will be displaced and if it is single displacement reaction then only one element displaces.
What is displacement reaction?Displacement reactions are those reactions in which any element of the given reactant will be displaced by any another element.
If only one element from the reactant molecules will displace then it will be known as single displacement reaction. If two elements or atoms will be displaced from the reactant molecules then it will be known as double displacement reaction.
Hence if one element displaceed then called the single displacement reaction and if two elements displaces then called as the double displacement reaction.
To know more about displacement reactions, visit the below link:
https://brainly.com/question/13328989
Eas: add two curved arrows to show how water acts as a base
what may cause some short term environmental changes how would organisms respond to these changes
Answer:
Refer to explanation
Explanation:
Weather is the main cause behind most short term environmental changes
For example, a period of heavy rain may lead to a pond overflowing, and flooding the nearby shrubbery
Animals in the area would adapt to this by trying to keep away from the flooded area until it dries out, once the rain ends
How many molecules make up 32 g of Oz?
Answer:
Chemical formula of Oxygen is O2.
We know ,
1 mole of a substance contains 6.022×10^23, Avogadro’s Constat.
Here, Molar mass of O = 16u
And molar mass of O2 = 32u
And 32g of O2 = 1 mole of O2
It means that,
32g of O2 = 6.022×10^23 molecules
Answer:
The correct answer is given in the picture
This ANSWER IS ONLY CORRECT WHEN Oz STAND FOR OZONE
A 112g sample of co(g) is combined with a 32g sample of o2(g) and the reaction represented proceeds as completely as possible.which two of the following statements are correct? *
a. co(g) is the limiting reactant.
b. o2(g) is the limiting reactant.
c. 4mol of co(g) reacts.
d. 2mol of co(g) remains unreacted.
e. 144g of co2(g) is produced.
Based in the equation of the reaction, oxygen gas, O2 is the limiting reactant and 2 moles of CO remain unreacted
What is the equation of reaction between CO and O2?The reaction of carbon(ii) oxide, CO and oxygen, O2 is a redox reaction which produces carbon (iv) oxide, CO2.
The equation of the reaction. is given below:
2 CO + O2 ----> 2 CO2From the equation of the reaction, 2 moles of CO are required to react with 1 mole of O2 to produce 2 moles of CO2
The moles of the reacting substances is calculated using the formula:
moles = mass/molar massMolar mass of CO = 28 g
Moles of CO = 112/28 = 4 moles
Molar mass of 02 = 32 g
Moles of O2 = 32/32 = 1 mole
Therefore, oxygen gas, O2 is the limiting reactant and 2 moles of CO remain unreacted.
Learn more about limiting reactant at: https://brainly.com/question/14225536
In Lhasa, Tibet, the elevation is 12,000 feet. The altimeter reading in an airplane is 19. 50 in Hg.
This pressure is equal to ___psi.
Given the data from the question, the reading (i.e pressure) of the altimeter in psi is 9.57 psi
Conversion scale1 inHg = 0.491 psi
Data obtained from the question Pressure (inHg) = 19.50 inHgPressure (psi) =? How to determine the pressure in psiThe pressure of the altimeter in psi can be obtained as illustrated below:
1 inHg = 0.491 psi
Therefore,
19.50 inHg = 19.50 × 0.491
19.50 inHg = 9.57 psi
Thus, 19.50 inHg is equivalent to 9.57 psi
Learn more about conversion:
https://brainly.com/question/2139943
You are pulling an object up 1 m with a 5 m ramp. You pull
with 20 N of force.
How much does the object weigh?
For an object 1 m long with a 5 m ramp, You pull with 20 N of force, The weight of the object is mathematically given as
W= 5714.3 N
What is the weight of the object ?Generally, the equation for the weight is mathematically given as
W = mg = F/Sinθ
W= 20/Sin0.2
W=20/ 0.0035
W= 5714.3 N
In conclusion, the weight of the object
W= 5714.3 N
Read more about Weight
https://brainly.com/question/11408596
Use the drop-down menus to complete each statement. is used as construction materials. is important for the production of crops. is the loss of fertile soil.
Bedrock is used in the construction of structures, the topsoil is important for the production of crops and the loss of fertile soil is known as desertification.
Bedrocks, topsoil, and desertificationBedrocks are underlining rocks below soils. They are useful in construction works such as buildings, bridges, etc.Topsoils are the topmost portions of soils. They are usually rich in humus and organic matter and are therefore very good for agricultural crop production.Desertification is simply the loss of fertile soils and their transformation to barren, unproductive lands. Topsoils are lost and soils are rendered unsuitable for agriculture.More on desertification can be found here: https://brainly.com/question/24255548
Answer:
1. Bedrock
2. Topsoil
3. Desertification
Explanation:
What is this element?
Answer:
stuff around the earth
Explanation:
like water,fire,wind,and earth/plants
Lithium nitride has a high melting point, 813*C. Nitrogen trifluoride has a low malting point, -207*C.
Explain why the melting points are different? [2 marks]
.....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Answer:
Lithium has high melting and boiling point due to its small size, due to which it possesses high ionisation energy. As a result the binding energy in its crystal lattice is very high. This is why lithium has high melting and boiling point.
Explanation:
I HOPE IT HELPS! THANX!!
STAY SAFE!!!
Convert 18◦C to Kelvin.
291.15 Kelvin
I hope this helps
Answer:
18 degrees Celsius = 291.15 Kelvin
Explanation:
The formula for finding Kelvin through Celsius is by adding 273.15 to the Celsius. In this case, it is 18 + 273.15 = 291.15
:)
How and Why did the Nazis dehumanized the Jews?
Topic sentence:
Text evidence:
Conclusion:
(Can someone help me out pls)
Answer:
Its because Hitler thought that there beliefs were trasha dn thought that these humans were worthless so he went out of his way to "DEHUMANIZE" them.
Explanation:
I need help please. Thanks
Answer:
Battery
Explanation:
The battery supplies the electricity needed for the circuit to work.
A person observes that when the front porch of a house is wet , it is very slippery. The person adds sand to a paint can and repaints the porch’s surface.
How will the new paint make the porch safer?
Answer:
a
Explanation:
it will help stop frictoin
7.13 g of NaF are dissolved in enough water to make 201 mL of solution. What is the molarity of this solution
Answer:
0.846MExplanation:
To find the molarity, we have an equation: moles ÷ liter.
To find the moles of NaF, take the gram ÷ molar mass of NaF
7.13/42.0 = 0.170 moles of NaF
201 ml ÷ 1000 = 0.201L
0.170 ÷ 0.201 = 0.846MHow many atoms are in a 250 g sample of Gold
Answer:
15.055 X 1023 atoms
Explanation:
hope clear
please help there are 3 answers brainlies is included with the best answer.
SUMMATIVE FOSSILS/FOSSIL RECORD/HISTORY OF LIFE ON EARTH
FOSSILS CAN BE CATEGORIZED INTO 3 MAJOR TYPES. THEY ARE:
REPLACEMENT
METAMORPHIC
TRACE
SEDIMENTARY
IMPRESSION
Answer:
Your answers would be:
-impression fossils
-trace fossils
-replacement fossils
Explanation:
Have a great rest of your day
#TheWizzer
Answer:
The are id-k- I dont know much on fossials. But did you know that thunder is lighting. I say this because thunder is just the noise lighting makes. We see the light firts because light travels faster than sound.
Explanation:
Hope This Helps
Have A Great Day
~Zero~
Helppp
1.
You should NEVER dump the following into a drain at home:
I. Medication
II. Corrosives
III. Juice
Answer:
Medication
Explanation:
These pharmaceuticals can pollute our water and unintentionally expose us to the chemicals in these medications. Recent studies have found that medicines flushed down the drain can contaminate our lakes and streams, which can hurt fish and other aquatic wildlife, and end up in our drinking water.
Why would you argue this is the best energy source to use?
Answer:
really its tought or we can say confusing
°__°
What happens to the sunlight when it reaches the Earth's surface?
O
All of the sunlight is reflected from the Earth's surface and radiated
back into space
O
Some of the sunlight is captured as heat on Earth, and some of it is
radiated back to space.
O
All of the sunlight is absorbed by the Earth's surface
Answer:
the second one
Explanation:
What are the factors that affect freezing-point depression
How many moles are in 4. 75 x 1025 molecules of O2?
Answer: 78.9 moles
Explanation:
4.75 x 10^25 molecules (1 mole / 6.02 x 10^23 molecules) = 78.9 moles :)
Why does a short circuit occur?
A. Current likes to try and break the circuit whenever possible
B. Current always follows the path of least resistance
C. Current always follows the path of most resistance
D. Current randomly flows around the circuit
Answer:
Current randomly flows around the circuitt
Answer:
B. Current always follows the path of least resistance.
Explanation:
A short circuit occurs when the current finds a way to bypass the appliance on a path that has little or no resistance. When one path through the circuit has 0 resistance (a short circuit), current follows the path of least resistance only.
what mass of sulfurous acid is produced when 245g of sulfur dioxide is reacted with water?
H₂O + SO₃ = H₂SO₃
The mass of sulfurous acid produced when 245g of sulfur dioxide is reacted with water is 313.8 g
StoichiometryFrom the question, we are to determine the mass of sulfurous acid produced
First, we will write the balaced chemical equation for the reaction
H₂O + SO₂ → H₂SO₃
This means 1 mole of H₂O reacts with 1 mole of sulfur dioxide (SO₂) to produce 1 mole of sulfurous acid (H₂SO₃)
Now, we will determine the number of moles of sulfur dioxide present
Mass of sulfur dioxide present = 245 g
Molar mass of sulfur dioxide = 64.066 g/mol
Using the formula,
[tex]Number \ of \ moles = \frac{Mass}{Molar\ mass}[/tex]
Then,
Number of moles of SO₂ present = [tex]\frac{245}{64.066}[/tex]
Number of moles of SO₂ present = 3.824 moles
This is the number of moles of SO₂ present
From balanced chemical equation
1 mole of H₂O reacts with 1 mole of sulfur dioxide (SO₂) to produce 1 mole of sulfurous acid (H₂SO₃)
Then,
Water (H₂O) will react with the 3.824 moles of sulfur dioxide (SO₂) to produce 3.824 moles of sulfurous acid (H₂SO₃)
∴ The number of moles of sulfurous acid produced is 3.824 moles
Now, for the mass of sulfurous acid produced
Molar mass of sulfurous acid = 82.07 g/mole
Using the formula,
Mass = Number of moles × Molar mass
Mass of sulfurous acid produced = 3.824 × 82.07
Mass of sulfurous acid produced = 313.8 g
Hence, the mass of sulfurous acid produced is 313.8 g
Learn more on Stoichiometry here: https://brainly.com/question/6061451
A neutralization reaction is a reaction between choose. That results in the formation of choose. And choose.
Neutralization reaction is the reaction that occur between acid and base.
What is Neutralization reaction?Neutralization reaction is the reaction that take place between acid and base to produce salt and water. For examples HCl react with NaOH to produce NaCl and H2O
Therefore, Neutralization reaction is the reaction between acid and base.
The question is not complete but the option are gotten from another website.
Here are the options.
an acid and a basea fuel and oxygenan acid and a metala salt and a baseLearn more about neutralization from the link below.
https://brainly.com/question/4090568
What are some consequences of solar flares in the ocean?
Answer:
they include pretty aurora as well as hazards
Infer Xenon, a nonreactive gas used in strobe lights, is a poor conductor of heat and electricity. Would you expect xenon to be a metal, a nonmetal, or a
metalloid? Where would you expect it to be on the periodic table? Explain.
Mark the lime poor conducter of heat and electricity.
Hence it's non metalYes why no ,Xenon is already has its secured place in modern periodic table.
It belongs to group 18,the Helium family and inert gas group having atomic no Z=54Xenon is a non-reactive gas. It will not conduct and react normally. Thus it can be classified as a non-metal. Xenon is placed in the inert gas or noble gas group that is group 18.
What are noble gases?Noble gases are inert gases in the 18th group of periodic table. Noble gases have completely filled orbitals and thus they no need other electrons.
Atoms participate in reaction when they are not stable because of the insufficient valence electrons. Noble gases such as argon, krypton, neon, xenon etc. have 8 valence electrons and thus are not reactive.
Metals are highly conductive and they are placed in the left side of periodic table. In periodic table, from left to right the metallic nature decreases and the other elements are called non-metals. Most of the non-metals are gases and very few such as silicon is metalloid.
Non-metals are insulators or poorly conduct electricity. Hence, xenon is a non-metal placed in the 18th group of periodic table.
To find more about xenon, refer the link below:
https://brainly.com/question/14524235
#SPJ2