Short run heating oil consumption will decrease by 4%, and long-term demand will decrease by 14%. Because people can react to changes in the price of heating oil more readily, the change is greater over time.
How elastic is the price both now and in the future?The demand elasticity for heating oil at the going rate = 0.2 in the foreseeable future
Price change over the long term is 0.7%; price change over the short term is 2.20 - 1.80 / 2 x 100 = 20%.
Both the short-term and long run demand for heating oil will decline by 4% each.
The shift in the price of heating oil is bigger over time because customers can respond to changes more quickly. The ratio of variations in quantity demanded and price over the short term is known as price elasticity of demand.
To get the percentage change in quantity required, divide 20 by 0.2; the result is 4%.
The ratio of long-term variations in quantity required and price is known as price elasticity of demand.
Change in demand as a percentage: 20 * 0.7 = 14% Change in demand as a percentage: 0.7 Demand change as a percentage: 20
Your question is incomplete but most probably your full question was
Suppose the price elasticity of demand for heating oil is 0.2 in the short run and 0.7 in the long run. if the price of heating oil rises from $1.80 to $2.20 per gallon, what happens to the quantity of heating oil demanded in the short run? in the long run? (use the mid point method in your calculations.)
To learn more about the short and long run here
brainly.com/question/16836331
#SPJ4
For an addition reaction, why does the free energy term, G, become more positive with increasing temperature?
A) The positive entropy term dominates at high temperature.
B) The negative entropy term dominates at high temperature.
C) The positive enthalpy term dominates at high temperature.
D) The negative enthalpy term dominates at high temperature.
E) The enthalpy and entropy terms cancel at high temperature.
For an addition reaction, why does the free energy term, G, become more positive with increasing temperature because the positive entropy term dominates at high temperature. So, option A is correct.
In an addition reaction, the free energy, G, is influenced by both the enthalpy, H, and entropy, S, terms. As temperature increases, the entropy term becomes more positive, while the enthalpy term remains relatively constant. At high temperatures, the positive entropy term dominates, causing the free energy, G, to become more positive. This means that the reaction becomes less favorable and less likely to occur.
The entropy term reflects the number of available molecular arrangements in a system and the degree of disorder. At high temperatures, the molecules have more kinetic energy and are more likely to be in disordered states. This results in a larger entropy term and a more positive G.
In contrast, the enthalpy term reflects the heat energy involved in a reaction and the bond-forming or bond-breaking nature of the reaction. At high temperatures, the enthalpy term remains relatively constant, as the reaction is not affected by changes in temperature.
In summary, the positive entropy term dominates at high temperature, causing the free energy, G, to become more positive and the reaction to become less favorable.
You can learn more about free energy at
https://brainly.com/question/27686274
#SPJ4
The reaction A+B 3C always goes to completion. If you have 10 A, how much B do you need to make the
most C?
Select one:
a. 5
b. This cannot be determined from the information given.
c. 10
d. 20
e. 30
C
C
C
The reaction A+B⇒3C always goes to completion. If you have 10 A, the number of B which would be needed to make the most C is 10 and is therefore denoted as option C.
What is a Chemical reaction?This is referred to as a process in which one or more substances, the reactants, are converted to one or more different substances, the products.
If you have 10 A, the number of B which would be needed to make the most C is 10 because of the equal amount number of mole of the substances or elements involved in the reaction.
Read more about Chemical reaction here https://brainly.com/question/11231920
#SPJ1
refer to the free energy diagrams below to answer the following questions. you may assume that the y-axis is the same and directly comparable for all five reactions.
The free energy diagrams can be used to compare and analyze the thermodynamic properties of different chemical reactions.
The y-axis of the diagrams represent the free energy of the reaction, and the x-axis represents the progress of the reaction from the reactants to the products. By comparing the free energy diagrams of different reactions, it is possible to determine which reactions are more thermodynamically favorable, and thus more likely to occur spontaneously.
Additionally, the diagrams can also provide insight into the activation energy of a reaction, which is the amount of energy needed to initiate the reaction.
Learn more about free energy diagrams:
https://brainly.com/question/6589816
#SPJ4
what is the name for MoO3?
Answer:
Explanation:
The chemical name for MoO3 is molybdenum trioxide.
rutherford's experiment was important because it showed that: A) Atomic NucleusB) ElectronC) ProtonD) Neutron
Rutherford discovered the nucleus . Option B
What did Rutherford discover ?
Ernest Rutherford is famous for his discovery of the structure of the atom and his pioneering work in nuclear physics. He made several key discoveries that transformed our understanding of atomic structure and the behavior of atomic nuclei.
Rutherford performed his famous gold foil experiment in which he used alpha particles to probe the structure of the atom. He found that most alpha particles passed straight through the gold foil, but a small number were deflected. This showed that the atom had a small, dense nucleus at its center.
Learn more about neutrons:https://brainly.com/question/28992636
#SPJ1
Rutherford's experiment was important because it showed that atomic nucleus and is therefore dented as option A.
What is an Experiment?
This is referred to as a procedure carried out to support or refute a hypothesis, or determine the efficacy or likelihood of something previously untried.
Rutherford was a scientist who was famous for his gold-foil experiment, in which he demonstrated that the atom has a tiny, massive nucleus by bombarding aluminum foil with beam of light known as alpha particles which is therefore the reason why option A was chosen as the correct choice.
Read more about Rutherford here https://brainly.com/question/14996029
#SPJ1
A company uses a substance that is a solid under normal conditions. This substance will be used in extreme conditions, which could make the substance’s molecules move faster and cause a phase change. How would this phase change occur, and how would the molecules of the substance be affected under these extreme conditions? Energy would be transferred . . .
The ways in which this phase change occur, and how would the molecules of the substance be affected under these extreme conditions would be when shift happens in which heat is applied or removed at a specific temperature.
What is Temperature?This is referred to as the degree of hotness or coldness of a substance and it is influenced by thermal energy.
Increase or decrease in the temperature of a substance is responsible for the phase changing from one form to another under extreme conditions being used as a n example.
Read more about Temperature here https://brainly.com/question/24746268
#SPJ1
If the Lewis structure must have a nonzero formal charge, select the best scenario below when using formal charge to predict molecular structure: a) the arrangement with the largest nonzero formal charges b) the arrangement with the smallest nonzero formal charges c) the arrangement with the largest and smallest nonzero formal charges d) the arrangement with the largest valence electrons
The best scenario when using formal charge to predict molecular structure is the arrangement with the smallest nonzero formal charges.
Formal charge is the difference between the number of valence electrons an atom has in its elemental form and the number of electrons assigned to it in a Lewis structure. The goal in molecular structure prediction is to distribute the electrons in a way that minimizes the formal charges on the atoms. The smallest formal charges indicate a more electrically neutral arrangement, which is generally considered the most stable and accurate representation of the molecule's electron distribution. So, option (b) the arrangement with the smallest nonzero formal charges" is the best scenario.
To know more about Lewis structure, visit the link given below:
https://brainly.com/question/20300458
#SPJ4
What mass of MnO2 is produced when 445 grams of H2O are reacted?
H2O + 2MnO4− + Br− → BrO3− + 2MnO2 + 2OH−
5,200 g
4,300 g
0.430 g
8,600 g
Question 2(Multiple Choice Worth 4 points)
(05.05 MC)
What mass of H2 is needed to react with 8.75 g of O2 according to the following equation: O2(g) + 4H2(g) → 2H2O(g)?
0.547 g H2
2.21 g H2
4.38 g H2
17.5 g H2
The term mole concept is used here to determine the mass of hydrogen. The mass of MnO₂ which is 4300g and that of hydrogen is 2.21 g. Thus the correct option is B for question 1 and same B for question 2 .
What is a mole?One mole of a substance is defined as that quantity of it which contains as many entities as there are atoms exactly in 12 g of carbon - 12. The formula used to calculate the number of moles is:
Number of moles = Given mass / Molar mass
The molar mass of water is 18.01528 g/mol and the given mass is 445 g.
Then the number of moles is:
445 g/ 18.01528 g/mol = 24.7 mol
In the equation 1 mole of 'H₂O' = 2 mole of 'MnO₂' and the molar mass of MnO₂ is 86.93 g/mol.
Then the mass of MnO₂ produced is:
445 ×1/18.01528 ×2 mol MnO₂/ 1 mol H₂O × 86.93 g/mol / 1 mol H₂O
= 4294.3 g
In scientific notation it is written as 4.3 × 10³ g = 4,300 g.
Thus the correct option is B.
In question 2:
The molar mass of oxygen is 16.00 g/mol and the given mass is 8.75.
Then the number of moles is:
8.75 g / 16.00 g/ mol = 0.546 mol
In the equation 1 mole of 'O' = 4 mole of 'H' and the molar mass of H₂ is 1.00794 g/mol.
Then the mass of H₂ produced is:
8.75 × 1 / 16.00 × 4/1 × 1.00794 / 1 = 2.2048 = 2.21 g.
Thus the correct option is B.
To know more about mole concept, visit;
https://brainly.com/question/19800462
#SPJ1
A scientist goes to lab to synthesize Na3AlF6 via the balanced chemical reaction
below. If they need 780. grams of Na3AlF6, and the overall percent yield is 45.4 %, how
much Al2O3 (in grams) is needed? You may assume NaOH and HF is in excess here.
6 NaOH + Al2O3 + 12 HF → 2 Na3AlF6 + 9 H2O
A scientist goes to lab to synthesize Na₃AlF₆ via the balanced chemical reaction. If they need 780. grams of Na₃AlF₆, and the overall percent yield is 45.4 %,311.79 g of Al₂O₃ is required to form 780 grams of Na₃AlF₆.
What do you mean by the balanced chemical reaction ?The balanced chemical reaction is defined as the mass of total number of product is exactly equal to the total number of mass of reactant.
Given:
45.4% yield = 780 g
Then 100% yield would be =780 × (100/45.4)
= 1718 g
Molar mass of Na₃AlF₆ = 209.94 g/mol
Molar mass of Al₂O₃ = 101.96 g/mol
1mole of Al₂O₃ gives 2 moles of Na₃AlF₆ .
⇾ 101.96 g of Al2O3 gives 2 × 209.94 g of Na3AlF6
Therefore, x g of Al2O3 gives 1284 g of Na3AlF6
x = (1718 × 101.96)/ 2 × 209.94
= 311.79 g
Thus, 311.79 g of Al₂O₃ is required to form 780 grams of Na₃AlF₆.
To learn more about the balanced chemical reaction, follow the link;
https://brainly.com/question/29997907
#SPJ1
When a salt is dissolved in water, it is represented by the following notation in a chemical reaction?a) (l)b) (s)c) (aq)
When a salt is dissolved in water, it is represented by c) aq.
A reaction occurs when there is a change in the state of the reactant leading to the formation of the new product.
When a compound gets dissolved, the solution becomes an aqueous solution of that compound.
In the case of a salt, when it gets dissolved into water, the ionic bonds existing between the atoms break to form ions. The solid salt then changes into aqueous solution of the salt.
What is aq symbol in chemistry?
In a chemical equation, the subscript (aq) after a molecule means that it is aqueous. An aqueous solution is a solution in which the solvent is water.
What is an aqueous solution?
An aqueous solution is one in which the solvent is liquid water. That is, solute (dissolved) ions and molecules are surrounded by water molecules and incorporated into the network of bonds within the water. The dissolved species then spread throughout the water.
To know more about an aqueous solution:
https://brainly.com/question/19587902
#SPJ4
What is The Change in Energy When an electron relaxes from n=3 to the n=2 state? is energy absorbed or emited? what is the wavelength of light associated with this transition .
One of the methodology of the paper I am reading stated 5 mg/ml final concentration, but the solute was supernatant, and the solvent was ethyl acetate. I am confused why is it in 5 mg/ml the same as the pellet when supernatant is in a liquid form. How did it come up with that unit of measurement?
Also, how can I get the 5 mg/ml for the pellet? Should I dissolve 5mg of pellet in 1 ml of the solvent? Or the per ml should already account for the 5mg additional volume of the solution?
The concentration of 5 mg/ml refers to the mass of the solute dissolved in a given volume of solvent (ethyl acetate) to create a solution
The 5 mg should be added to the volume of solvent, so the final volume of the solution will be greater than 1 ml.
The supernatant solutionThe concentration of 5 mg/ml refers to the mass of the solute (in this case, the material in the supernatant) dissolved in a given volume of solvent (ethyl acetate) to create a solution. It is a measure of how much of the solute is present in a unit volume of the solution.
If you want to achieve a final concentration of 5 mg/ml for the pellet, you would need to dissolve 5 mg of the pellet in enough ethyl acetate to make a total volume of 1 ml. The 5 mg should be added to the volume of solvent, so the final volume of the solution will be greater than 1 ml.
It's worth noting that the concentration of the pellet may be different from the concentration of the supernatant, depending on the experimental procedure used to generate the supernatant. It's also possible that the 5 mg/ml concentration is not relevant to the pellet and is only given as a reference point for the supernatant.
Learn more about supernatants here https://brainly.com/question/10702032
#SPJ1
The reaction between ammonia and oxygen is given below:
4 NH3(g) + 5 O2(g) 4 NO(g) + 6 H2O(g)
What reactions can also occur?
Other reactions that can occur during the reaction between ammonia and oxygen are:
1) Decomposition of ammonia: 2 NH3(g) → N2(g) + 3 H2(g)
2) Oxidation of nitrogen: 4 NO(g) → 2 N2O(g) + 2 O2(g)
3) Formation of nitrogen dioxide: 4 NO(g) + O2(g) → 2 NO2(g)
4) Combustion of hydrogen: 2 H2(g) + O2(g) → 2 H2O(g)
These reactions can occur under different conditions, such as high temperature or pressure, or the presence of catalysts.
What is the role of a catalyst?A material that catalyzes a chemical reaction does so without being consumed or altered. Its function is to reduce the activation energy necessary for a reaction to happen, enabling the reaction to occur more rapidly and readily. By offering a different reaction pathway with a lower activation energy, catalysts enable the reactants to achieve the transition state and progress more quickly in the direction of the product. Catalysts can be used to speed up otherwise too-sluggish reactions or to create desired products from undesirable or unwanted ones. They are utilized in many commonplace products, such as automotive catalytic converters, and are essential in numerous industrial procedures.
To know more about catalysts, check out:
https://brainly.com/question/27901111
#SPJ1
how may moles are in 5.1 X 10^25 atoms of He?
Answer:
Explanation:
0.87
Calculate the heat needed to convert 25.0 grams of solid silver from 950.°C to liquid silver at 972°C. The specific heat of solid silver is 0.235 J/g C, for liquid silver it's 0.278 J/gºC. 3 steps
The heat required is 2347 J
What is the heat required for change of state?The heat required for a change of state depends on the substance, the amount of the substance, and the specific change of state involved.
When a substance undergoes a change of state, such as melting or boiling, heat is added or removed to cause the particles in the substance to gain or lose energy and rearrange themselves into a new physical state. The amount of heat required to effect this change is known as the heat of transformation, or the heat of fusion
We know that;
H1 = 25.0 * 0.235 * (962 - 950)
= 70.5 J
H2 = 25 g * 88 J/g
= 2200 J
H3 = 25 * 0.278 * (972 - 962)
=76. 5 J
Then we have that;
70.5 J + 2200 J + 76. 5 J
=2347 J
Learn more about heat:https://brainly.com/question/1429452
#SPJ1
For the reaction C + 2H₂ → CH4, how many grams of carbon are required to produce 12.6 moles of
methane, CH4 ?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer
as 4.0
151.3 grams of carbon are required to produce 12.6 moles of methane.
What is the mass of carbon required to produce 12.6 moles of methane, CH4 ?
The balanced chemical equation for the reaction is:
C + 2H₂ → CH₄
According to the stoichiometry of the equation, 1 mole of carbon reacts with 2 moles of hydrogen gas to produce 1 mole of methane gas. Therefore, the number of moles of carbon required to produce 12.6 moles of methane is:
12.6 moles CH₄ × 1 mole C / 1 mole CH₄ = 12.6 moles C
To convert moles to grams, we need to use the molar mass of carbon, which is 12.01 g/mol.
Therefore, the mass of carbon required to produce 12.6 moles of methane is:
12.6 moles C × 12.01 g/mol = 151.3 g
Learn more about reaction here: https://brainly.com/question/29470602
#SPJ1
Which of the following is NOT considered an essential nutrient for photosynthesis or phytoplankton growth?Nitrogen (N)Phosphorus (P)Iron (Fe)Silicon (Si)Aluminum (Al)
Aluminum (Al) is not considered an essential nutrient for photosynthesis or phytoplankton growth.
While aluminum is abundant in the Earth's crust, its availability is dependent on soil pH, and it is not required for photosynthesis or phytoplankton growth. The essential nutrients for photosynthesis and phytoplankton growth are:
nitrogen (N)phosphorus (P)iron (Fe)silicon (Si).Photosynthesis and phytoplankton growth are essential processes in the global carbon cycle. Photosynthesis uses light energy to convert carbon dioxide and water into energy-rich organic compounds, while phytoplankton growth utilizes organic compounds to produce organic matter. Both processes are essential for maintaining the balance of carbon dioxide in the atmosphere and oceans.
Learn more about photosynthesis or phytoplankton:
https://brainly.com/question/844604
#SPJ4
You just purchased a 2.0 lb. bag of urea, which is used as a cost-effective fertilizer for your garden. Urea has the chemical formula, (NH2)CO, and a molar mass of 60.06. g/mol. How many nitrogen atoms are present in this 2.0 lb. bag of urea? (1 pound = 453.6 g).
Urea is the primary nitrogenous byproduct of protein breakdown in all mammals as well as certain fishes. Therefore, 1.81×10²¹atoms are present.
What is urea?Urea, commonly known as carbamide, is a carbonic acid diamide. It has the formula H2NCONH2. Urea is used as a fertilizer as well as feed additive, as well as a beginning ingredient in the production of polymers and pharmaceuticals. It is a colorless, crystalline chemical that dissolves at 132.7 degrees Celsius (271 degrees Fahrenheit) and decomposes after boiling.
Urea is the primary nitrogenous byproduct of protein breakdown in all mammals as well as certain fishes. The substance is found not just in all animals' urine, but also mammalian blood, bile, milk, as well as sweat.
mole =given mass /molar mass
=2×453.6g/60.06
=907.2/60.06
= 15.10
atoms of nitrogen = 2×15.10 × 6.022×10²³=1.81×10²¹atoms
Therefore, 1.81×10²¹atoms are present.
To learn more about urea, here:
https://brainly.com/question/14811017
#SPJ1
Indicate the subatomic particle described by each of the statements. A statement may describe more than one particle. possesses a negative charge has no charge has a mass slightly less than that of a neutron has a charge equal to but opposite in sign to that of an electron is not found in the nucleus Answer Bank has a positive charge proton neutron can be called a nucleon electron is the heaviest of the three subatomic particles has a relative mass of 1836 if the mass of an electron is 1 has a relative mass of 1839 if the mass of an electron is 1
a)possesses a negative charge - electron
b)has no charge - neutron
c)has a mass slightly less than that of a neutron - proton
d)has a charge equal to, but opposite in sign from, that of an electron - proton.
What has a negative charge?
Electrons have a negative charge. The charge on the proton and electron are exactly the same size but opposite. Neutrons have no charge. Since opposite charges attract, protons and electrons attract each other.
What are the four properties of neutrons?
Neutrons are neutral particles – with no net electric charge.
Neutrons have a non-zero magnetic moment.
Free neutrons (outside a nucleus) are unstable and decay via beta decay.
Is a neutron's mass slightly less than a proton's?
The mass of a neutron is slightly greater than the mass of a proton, which is 1 atomic mass unit (AMU).
Is the charge of an electron opposite to the charge of a proton?
Electrons and protons have equal and opposite charges. The magnitude of this charge is 1.6×10−19 Coulomb.
To know more about protons, neutrons, and electrons:
https://brainly.com/question/29248303
#SPJ4
How many grams of carbon are in 25g of CO2
The number of grams of carbon in 25g of carbondioxide is 6.82g.
How to calculate mass?The mass of an element in a compound can be calculated by dividing the atomic mass of the element by the molar mass of the compound multiplied by the mass of the compound.
According to this question, there are 25g of carbondioxide. The mass of carbon in this compound can be calculated as follows:
Molar mass of carbondioxide = 44g/molAtomic mass of carbon = 12g/molMass of carbon = 12/44 × 25
Mass of C = 6.82g
Learn more about mass at: https://brainly.com/question/16386473
#SPJ1
your unknown will contain only two of the three possible compounds. you must identify which two compounds were present in your unknown mixed sample
Identifying the two compounds present in an unknown mixed sample can be a challenging task, but a combination of these techniques can help to narrow down the possibilities and eventually identify the compounds.
Here are some possible approaches:
Analyze the physical and chemical properties of the unknown sample, such as melting point, boiling point, solubility, reactivity with certain chemicals, and spectroscopic data (e.g., IR, NMR, UV-Vis). Compare these properties to those of known compounds and see which ones match.
Use various separation techniques to isolate each individual component of the mixture, such as extraction, distillation, chromatography, and crystallization. Then, analyze each isolated component using various analytical techniques to determine its identity.
Use chemical tests and reactions to identify the functional groups or chemical characteristics of the unknown sample. For example, if the sample contains a carbonyl group, it can be tested with 2,4-dinitrophenylhydrazine to form a characteristic orange precipitate.
Overall, identifying the two compounds present in an unknown mixed sample can be a challenging task, but a combination of these techniques can help to narrow down the possibilities and eventually identify the compounds.
Learn more about dinitrophenylhydrazine here:
https://brainly.com/question/14985873
#SPJ4
In a first-order reaction at 300 K, the half-life is 2.50 x 10^4 seconds and the activation energy is 103.3 kJ/mol.
What is the rate constant at 350 K?
Answer:
In a first-order reaction at 300 K, the half-life is 2.50 x 10^4 seconds and the activation energy is 103.3 kJ/mol.
What is the rate constant at 350 K?
Explanation:
A chemist prepares a solution of calcium bromide CaBr2 by measuring out 188.μmol of calcium bromide into a 450.mL volumetric flask and filling the flask to the mark with water.
Calculate the concentration in /molL of the chemist's calcium bromide solution. Be sure your answer has the correct number of significant digits.
answer : 0.00042 mol/L
steps:
Concentration = moles ÷ liters
Concentration = (number of moles) / (volume in L)
Concentration = 0.000188 mol / 0.450 L = 0.000417 mol/L
The concentration of the calcium bromide solution is 0.00042 mol/L (rounded to 3 significant figures).
The first step is to calculate the number of moles of calcium bromide in the solution:
Number of moles = (mass of CaBr2) / (molar mass of CaBr2)
The molar mass of CaBr2 is:
1 x atomic mass of Ca + 2 x atomic mass of Br = 1 x 40.08 g/mol + 2 x 79.90 g/mol = 199.88 g/mol
The mass of CaBr2 is given as 188.μmol, which is equivalent to 188 x 10^-6 mol.
Therefore, the number of moles of CaBr2 in the solution is:
Number of moles = (188 x 10^-6 mol) / (1 mol/ 1000 μmol) = 0.000188 mol
The volume of the solution is given as 450 mL, which is equivalent to 0.450 L.
Therefore, the concentration of the solution is:
Concentration = (number of moles) / (volume in L)
Concentration = 0.000188 mol / 0.450 L = 0.000417 mol/L
The concentration of the calcium bromide solution is 0.00042 mol/L (rounded to 3 significant figures).
ChatGPT
50. Question The atom of an element X contains 17 protons, 17 electrons and 18 neutrons whereas the atom of an element Y contains 11 protons, 11 electrons and 12 neutrons. (a) What type of ion will be formed by an atom of element X? Write the symbol of ion formed. (b) What will be the number of (i) protons (ii) electrons, and (iii) neutrons, in the ion formed from X? (c) What type of ion will be formed by an atom of element Y? Write the symbol of ion formed. (d) What will be the number of (i) protons (ii) electrons, and (iii) neutrons, in the ion formed from Y?
Answer:
Explanation:
a) If an atom of element X loses one electron, it will form a positively charged ion or cation with the symbol X^+.
b) (i) 17 protons, (ii) 16 electrons, (iii) 18 neutrons.
c) If an atom of element Y gains one electron, it will form a negatively charged ion or anion with the symbol Y^-.
d) (i) 11 protons, (ii) 12 electrons, (iii) 12 neutrons.
what is the actual average mass of 1 li atom (in grams/atom)? express your answer in scientific notation to 3 sig. fig.
The actual average mass of 1 lithium atom is 6.941 grams/atom this is equal to one mole of lithium.
What is atomic mass ?The fundamental physical property of matter is mass. The atomic mass refers to the mass of an atom or molecule. To calculate the average mass of elements and molecules and to solve stoichiometry problems, the atomic mass is used.
Lithium, for example, has an atomic mass of 6.941 grams, which is equivalent to one mole of lithium. This is why we express atomic and molecular masses in grams per mole, or g/mol.
Thus, The actual average mass of 1 lithium atom is 6.941 grams/atom.
To learn more about the atomic mass, follow the link;
https://brainly.com/question/17067547
#SPJ1
O Hydrogen More than 500 years ago, Para of the reaction of an acid and repeated Paracelsus's experi flammable.
The statement that Hydrogen was discovered more than 500 years ago due to the reaction of an acid and metals ... repeated Paracelsus 's experiment, the gas was flammable, is true.
How was hydrogen discovered ?When Paracelsus combined acids with metals, hydrogen gas was produced as a byproduct, which he observed unintentionally. A Swiss-born physician named Theodore de Mayerene who subscribed to Paracelsian thought replicated Paracelsus' research on the interaction of metals and acids.
De Mayerne found that the byproduct gas was combustible, which was an important finding in the future knowledge of chemical reactions even if he was unaware that the gas created was hydrogen or even a new element.
Find out more on Paracelsus at https://brainly.com/question/10644901
#SPJ1
The correct question is:
Hydrogen was discovered more than 500 years ago due to the reaction of an acid and metals and when Theodore de Mayerene repeated Paracelsus 's experiment, the gas was flammable.
True
False
contrast the thomsom model and the rutherford model of the atom
The Thomson model of the atom proposed that the atom was a sphere of positive charge with negative electrons embedded in it. This model was later disproved by the Rutherford model, which proposed that the atom was composed of a small, dense, positively charged nucleus surrounded by a cloud of negatively charged electrons. The Rutherford model also suggested that the electrons were in orbit around the nucleus, rather than being embedded in it.
Calculate the volume of 1.0M copper(II) sulfate solution required to completely react with 1.0g of Fe(s) according to this equation: 2Fe(s)+3Cu2+(aq)→2Fe3+(aq)+3Cu(s).
0.0269 Litre is the volume of 1.0M copper(II) sulfate solution required to completely react with 1.0g of Fe(s) according to this equation: 2Fe(s)+3Cu2+(aq)→2Fe3+(aq)+3Cu(s).
What do you mean by molarity ?The term molarity is defined as the number of moles of solute present in per litre of solution.
Given:
Moles of Fe = mass of Fe / molar mass of Fe
Mole Fe = 1.0 g / 55.845 g/mol
= 0.0179 mol
According to the balanced chemical equation,
3 mol Cu2+ are required to react with 2 mol Fe.
So, the number of moles of Cu2+ required to react with 0.0179 moles of Fe is mol Cu2+ = (3/2) x mol Fe
= (3/2) x 0.0179 mol
= 0.0269 mol
By using the molarity,
mole = concentration x volume
volume = moles / concentration
Volume = 0.0269 mol / 1.0 mol/L
Volume = 0.0269L
Thus, the volume of 1.0 M Cu⁺² solution required to fully react with 1.0 g of Fe is 0.0269 L.
To learn more about the molarity, follow the link;
https://brainly.com/question/8732513
#SPJ1
Perform this operation solving for x. Give answer to the proper number of significant figures.
x=0.01953 cm + (7.32 x 10^-3 m)
Answer: x = 0.752cm or 0.00752m
Explanation:
There are two ways to do this. The first is converting the number in meters (m) to centimeters (cm) and then adding. The second is converting the number in centimeters (cm) to meters (m) and then adding.
Way 1:
0.00732m * (100cm / 1m) = 0.732cm
0.01953cm + 0.732cm = 0.75153
With addition, the amount of significant figures for the answer is the same number of significant figures as the limiting one (or, in other words, the one with the least number of significant figures). In this case, 0.732cm has 3 significant figures and 0.01953cm has 4. This means that the answer has 3 significant figures.
So with significant figures, 0.75153cm = 0.752cm
Way 2:
0.01953cm * (1m / 100cm) = 0.0001953m
0.0001953m + 0.00732m = 0.0075153m
With significant figures, 0.0075153m = 0.00752m
Which of the following is NOT a type of molecular interaction that determines the tertiary structure of a protein?A. covalent bonds between purines and pyrimidine basesB. ionic bondsC. Van der Waals forcesD. covalent bonds between two cysteine amino acidsE. hydrogen bonds
Covalent bonds between purines and pyrimidine bases is NOT a type of molecular interaction that determines the tertiary structure of a protein. The correct answer is A.
A polypeptide's overall three-dimensional structure is referred to as its tertiary structure. The interactions between the R groups of the amino acids that make up the protein are principally responsible for the tertiary structure.
The entire spectrum of non-covalent bonds, including hydrogen bonds, ionic bonds, dipole-dipole interactions, and London dispersion forces, all contribute to tertiary structure.
For instance, R groups with opposite charges can form an ionic bond, while those with like charges repel one another. Similar to other dipole-dipole interactions, polar R groups can create hydrogen bonds
Hydrophobic interactions are crucial to tertiary structure because they allow hydrophilic amino acids to connect with nearby water molecules on the outside of the protein while forming clusters of nonpolar, hydrophobic R groups on the inside of the protein.
The disulfide link is a unique sort of covalent bond that can contribute to tertiary structure. Disulfide bonds, covalent connections between the side chains of cysteines that contain sulfur, are substantially more powerful than the other kinds of bonds that make up tertiary structure.
They serve as molecular "safety pins," firmly connecting various polypeptide components to one another.
Learn more about molecular interaction at https://brainly.com/question/21220768
#SPJ4