steve races to the nearest taco stand at lunchtime and sees that his pedometer recorded his peak speed at 105.1 105.1 cm/s. what was steve's peak speed in kilometers per hour?

The electric field at the center of the square when three sides of square have a charge of 4 coulomb will be zero.

This is because the electric fields from each side of the square will cancel each other out. The electric field of a single side of the square is given by the equation E = q/4πεr, where q is the charge, ε is the permittivity of free space, and r is the distance from the center of the square. Since the distances from the center of the square to the sides are all equal, the electric fields from the sides will be equal in magnitude and opposite in direction, meaning that the net electric field at the center of the square will be zero.

To know more about electric fields please refer:

https://brainly.com/question/8971780

#SPJ4

Answer:

Try to apply the 100 N for 0.2 s.

The options 1 and 4 are correct given that the concept of constant velocity applies to their situation where, and object moves in a constant speed and direction.

What is velocity?

To know more about velocity, click the link given below:

https://brainly.com/question/18084516

#SPJ4

w1 and wr are the angular velocities will be the correct answer .

What is Distance ?

Distance is a scalar quantity that describes the amount of space between two points. It is usually measured in units of length, such as meters, kilometers, or miles. Distance can be calculated as the magnitude of the displacement vector, which is the difference between the initial and final positions of an object.

In physics, distance can be used to describe the length of a physical object, the distance between two points in space, or the length of a path taken by an object. In mathematics, the concept of distance is often used in geometry and can refer to the length of a line segment, the shortest distance between two points, or the distance between two shapes.

To know more about Distance , click the given link below ;

https://brainly.com/question/26046491

#SPJ1

Experimental measurements don't necessarily reflect a physical quantity's genuine value. The ideal or theoretical value of a physical quantity, which is never perfectly measurable in reality, is that quantity's true value.

When a physical quantity is measured, it is always subject to a variety of causes of error, including the constraints of the measuring device, the environment, operator error, and random fluctuations.

The most that can be done is an estimation of the true value, which is expressed as a measured value with a corresponding uncertainty. The range of values that can be logically regarded as the actual value of the quantity being measured is reflected in the uncertainty. The accuracy of the measuring device, the operator's expertise, and the repeatability of the measurement process are all elements that influence the measurement's uncertainty. In conclusion, experimental measurements provide an estimate of a physical quantity's real value rather than the actual value.

learn more about physical quantity here:

https://brainly.com/question/26171158

#SPJ4

The statement accurately describes the motion of the object in the graph above is from 2s to 6s, the object is moving at 1.5 cm/s.

option D is the correct answer

A speed time graph is a graph that shows the motion of an object against time. They can also be referred to as velocity-time graphs.

The motion of the object in the graph above can be described as follows;

between 0 to 2 seconds, the speed of the object = 0 cm/s

between 2 to 6 seconds, the speed of the object = 1.5 cm/s

between 6 to 8 seconds, the speed of the object = 0 cm/s

Learn more about speed - time graph here: https://brainly.com/question/30015054

#SPJ1

If a star of mass 2 solar masses has a planet with a period of 2 years, then 2AU is the planet's separation (distance) from the star.

The orbital period of a planet—the amount of time it takes for one orbit to complete—relates to its mean distance from the Sun according to Kepler's third law, often known as the Harmonic Law. The closest planets have the fastest speeds and the shortest orbital periods, according to this law. History. In 1609, Kepler published his first two planetary motion laws, which he had discovered by examining Tycho Brahe's astronomical data. In 1619, Kepler's third law was made public.

we have Keplers third law of planetry motions as

[tex]p^{2}=a^{3}/(M_{s}+M_{p})[/tex]

where

p= period

a= distance in AU

Ms= mass of star

Mp=mass of planet

we will assume

Ms + Mp = Ms

(As mas of planet is very small compare to star)

Now,

2² x 2 = a³

a = 2 AU

Learn more about the Keplers third law here: https://brainly.com/question/1832388

#SPJ4

According the diagram, the magnitude of resultant force at A was found to be 1183N.

Calculation:

First, we have to calculate the position vectors of all the point symbols:

Position vector of A= 0i+ 0j+ 6k

Position vector of B= 3i- 2j+ 0k

Position vector of C= 2i+ 3j+ 0k

Vector AB is formed by

Vector AB= Position vector of B - Position vector of A= (3i- 2j+ 0k) – (0i+ 0j+ 6k)= 3i- 2j- 6k

Magnitude of Vector AB= √(i^2+ j^2+ k^2) = √(3^2 +2^2 +6^2)= 7

Univector of AB= UAB = Vector AB/ Magnitude of Vector AB= (3i- 2j- 6k)/7 = 0.429i- 0.28j- 0.857k

Magnitude of force at B= 840N

Cartesian vector form of AB= (Magnitude of force at B)*( Univector of AB)= 840*(0.429i- 0.28j- 0.857k)

Cartesian vector form of AB= 360i- 240j- 720k

Similarly for vector AC,

Vector AC= Position vector of C - Position vector of A= (2i- 3j+ 0k) – (0i+ 0j+ 6k)= 2i+ 3j- 6k

Magnitude of Vector AC= √(i^2+ j^2+ k^2) = √(2^2 +3^2 +6^2)= 7

Univector of AC= UAC = Vector AC/ Magnitude of Vector AC= (2i+ 3j- 6k)/7= 0.286i- 0.429j- 0.857k

Magnitude of force at C= 420N

Cartesian vector form of AC= (Magnitude of force at C)*(Univector of AC)= 420*(0.429i- 0.28j- 0.857k)

Cartesian vector form of AC= 120i+ 180j- 360k

With the two Cartesian vector forms, we can calculate resultant force at A= (120i+ 180j- 360k) + (360i- 240j- 720k)= 480i- 60j- 1080k

Magnitude of resultant force at A= √ (i^2+ j^2+ k^2)= 1183N

Complete question: attached in document

Learn more about resultant force here brainly.com/question/24524696

#SPJ4

Answer:

H = V0 t - 1/2 g t^2        height (from top of building) after t sec

H = 25 * .25 - 9.8 / 2 * .25^2 = 5.94 m

H = 6 m after .25 sec and the total height is 36 m

h =36 m above ground

The elevation of the stone following 0.25 seconds is 36 meters above the ground, as shown by the question.

To separate the enzyme's impact from the uncatalyzed action. Since enzymes are permanently destroyed throughout catalysis, it is necessary to determine the reaction's rate with a known [E]T. to calculate the reaction's speed using a given [S] before it starts to alter noticeably over time.

H = V0 t - 1/2 g t^2       height (from top of building) after t sec

H = 25 * .25 - 9.8 / 2 * .25^2 = 5.94 m

H = 6 m after .25 sec and the total height is 36 m

h =36 m above ground

To know more about initial velocity visit:

https://brainly.com/question/28395671

#SPJ4

The given statement "an experiment must have a placebo group in order to be valid" is not true because not all experiments require a placebo group in order to be considered valid.

A placebo group is used in some experimental designs to control for the placebo effect, where a participant's expectations or beliefs about a treatment can influence the outcome. However, there are many other experimental designs that do not require a placebo group, such as observational studies, crossover studies, and randomized controlled trials. The appropriate design depends on the research question being asked and the type of treatment being tested.

You can learn more about placebo group at

https://brainly.com/question/28583466

#SPJ4

The correct way to report the length of the rectangle in centimeters is 15.60 cm.

The number that is given as digits is established using significant figures. A meaningful representation of numbers is carried by these digits. Frequently, significant digits are employed in place of figures.

By counting all of the values beginning with the first non-zero digit on the left, we may determine the number of significant digits. 12.45, for instance, has four significant digits.

The act of determining an object's length in some standard or non-standard units is known as length measurement. In our daily lives, the ability to measure length is crucial.

Therefore, The correct way to report the length of the rectangle in centimeters is 15.60 cm.

To know more about significant figures refer to:

https://brainly.com/question/24491627

#SPJ4

The electron's motion can be described as a combination of constant-speed horizontal motion and gravity-influenced vertical motion. The vertical motion can be described using the following equation:

y = v₀t + (1/2)gt²

where y represents vertical displacement, v0 represents initial vertical velocity (0 m/s), t represents the time elapsed, g represents gravity's acceleration (9.8 m/s²), and t represents the time elapsed.

Because the electron moves horizontally at a constant speed, its horizontal distance can be expressed as:

x = vt

where v denotes horizontal velocity (1.5 x 10(6) m/s).

We can use the relationship between horizontal and vertical distances to calculate the time elapsed:

35 cm = 0.35 m x = vt

t = x / v

Plugging in the values:

t = 0.35 m / (1.5 x 10⁶ m/s)

Substituting the time elapsed into the equation for the vertical displacement:

y = v₀t + (1/2)gt²

y = 0 m/s + (1/2)(9.8 m/s²)(t²)

So the electron will fall a distance of y in the vertical direction before hitting the screen.

To Learn More About Distance Click

https://brainly.com/question/15172156

#SPJ4

To keep the balance the beam's required magnitude of force f will be 22 N.

Given,

Length of the beam, xy = 100cm

Pivoted at 60 cm from end x

Weight force at 50 cm from x, W = 4 N

force due to hanging mass, F = 8 N 10 cm from x

and f at 80 cm at x.

Now, let the direction of force f is downward

so we have to balance the moment due to all the forces about the pivot,

So the total clockwise moment

= fx(80-60) = 20f Ncm

And anti-clockwise moment

= Wx(60-50) + F(60-10) = 4x10+8x50 = 440 Ncm

Now anticlockwise moment = Clockwise moment

or 20f = 440

or f = 22 N

Therefore, To keep the balance the beam's required magnitude of force f will be 22 N.

To learn more about the moment:

https://brainly.com/question/14327819

#SPJ4

A centripetal force of 155 n acts on a 1,500-kg satellite moving with a speed of 5,300 m/s in a circular orbit around a planet. The radius of its orbit is 1.35  x [tex]10^{7}[/tex] meters.

The radius of a satellite's orbit can be calculated using the equation for centripetal force:

F = m * [tex]v^{2}[/tex]/ r

Where,

m = the mass of the satellite

v =  its speed

r = the radius of its orbit.

Rearranging the equation and plugging in the given values:

r = m * [tex]v^{2}[/tex] / F = (1500 kg) * [tex](5300 m/s)^{2}[/tex] / (155 N)

r = approximately 1.35  x [tex]10^{7}[/tex] meters.

So the radius of the satellite's orbit is approximately 1.35  x [tex]10^{7}[/tex] meters.

Here you can learn more about centripetal force

brainly.com/question/14249440

#SPJ4

A ball on an inclined plane (C) can accelerate at speeds between 0 and g.

An inclined plane, also referred to as a ramp, is a flat supporting surface that is tilted at an angle and has one end that is higher than the other.

One of the six simple machines, the inclined plane helps raise or lower a load. The unbalanced force causes objects placed on an inclined plane to accelerate.

In an inclined plane, the normal force does not act in the way that we are used to. Up until this point, normal force has always been seen to be directed upward, counter to the pull of gravity.

The truth is that normal forces are not always upward.

To know more about acceleration visit:

brainly.com/question/20798516

#SPJ4

According to the law of conservation of energy, energy cannot be created or destroyed. Energy changes into different forms, and potential energy plus kinetic energy equals a constant.

The physical energy of the system is conserved in the scenario of a freely falling body. The kinetic energy (K) and potential energy (U) of the freely falling body are added to form mechanical energy (E).

Thus, E = K + U = constant.

Potential energy is the opposite of the work performed by a force that affects the body. In the case of earth's gravity, the potential energy of a body with mass m and height h is given by the equation:

PE = mgh.

Learn more about law of kinetic energy here: https://brainly.com/question/29571427

#SPJ4

A load of 60 j 80 has a current of 9.60 a with a phase angle of 30o, the real power absorbed by the load is P=5529.61W

Z₁ = 60+j80

I=96/30 A

VL= 2. ZL= (9.6(30) 60+j80)

V₁ =(19.6/30") (100|53.136)

Vl=960 (83.130) V

power absorbed by Land

= (960) (9.6) cos(83.136 - 30°)

P=5529.61W

Real power is the amount of energy that is actually consumed by the resistive load, whereas perceived power is the amount of energy that the grid must be able to handle. Real power is measured in watts, but apparent power is measured in VA (Volt Ampere),

Learn more about power:

brainly.com/question/1634438

#SPJ4

Given a force F = 5 kN operating at an angle of = 30°, the size of the resulting force may be calculated as follows:[tex]\begin{equation}(F 2+F 2-2 F x F \cos ())=R\end{equation}[/tex] is the resulting force's size.

F is the magnitude of each force, and is the angle between the forces. When we plug in the values, we get: [tex]R = √(5^2 + 5^2 - 2 * 5 * 5 * cos(30°)) R = √(25 + 25 - 50 * √(3)/2) R = √(50 - 25 * √(3)) R = √(50 * (1 - √(3))) R = √(50 * (√(3) - 1)) R ≈ 7.07 N[/tex] The inverse tangent (arctan) function may be used to calculate the direction of the resulting force, as shown below: arctan(Fsin() / (Fcos() + F)) where is the resulting force angle measured counterclockwise from the positive x-axis. When we plug in the values, we get: [tex]arctan(5 * sin(30°) / (5 * cos(30°) + 5) arctan(0.5 / 2.5) = Φ ≈ 14.04°[/tex] As a result, the resulting force has a value of roughly 7.07 N and a direction of approximately 14.04° counterclockwise from the positive x-axis.

learn more about  force here:

https://brainly.com/question/13191643

#SPJ4

Answer:

A

Explanation:

because i just knowg a hdduehdudhdreheiei

The point between the two charges where the electric field equal to zero is calculated to be 1.55 m.

The charge q₁ is given as 3 nc = 3 × 10⁻⁹ c

It is located at x₁ = 0.

The charge q₂ is given as 7.5 nc = 7.5 × 10⁻⁹ c

It is located at x₂ = 4 m.

Let us suppose that, electric field is zero at the point x, it is in between 0 and 4 m.

We know the formula for electric field as,

E = k q /r²

Let us equate the electric field at both the charges.

k q₁/x² = k q₂/(x₂ - x)²

q₁ (x₂ - x)² = q₂ x²

3 × 10⁻⁹× (4 - x)² = 7.5 × 10⁻⁹ × x²

3 × ( 16 + x² - 8x) = 7.5 ×x²

48 + 3x² - 24x = 7.5x²

4.5 x² + 24x - 48 = 0

The two values of x are,

x = 1.55, -6.883

The distance cannot be negative. So, the electric field at x = 1.55 m is said to be zero.

Thus, the required value of x is 1.55 m.

To know more about electric field:

https://brainly.com/question/4273177

#SPJ4

The sketch for the voltage vs time graph for an ideal periodic digital waveform with a 1.0 volt amplitude, a 12 us period and a 25% duty cycle would look like this:

The voltage vs time graph for an ideal periodic digital waveform with a 1.0 volt amplitude, a 12 us period and a 25% duty cycle is a type of waveform that is commonly used in digital electronics. This type of waveform is important because it is used to represent the logical states of digital circuits, such as 0's and 1's.

Learn more about periodic digital waveform

https://brainly.com/question/22858440

#SPJ4

The electric field due to charge 1 at the origin is 2.24 x 10^5 N/C in the direction to the left.

Coulomb's Law states that the force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. It is represented as F = (k * q1 * q2) / r2, where F is the force, k is a constant, q1 and q2 are the charges, and r is the distance between the two particles.

Charge 1: 50.0 nC, located 20.0 cm to the left of origin

Charge 2: 35.0 cm to the right of origin

Using Coulomb's Law, the electric field at the origin due to charge 1 is:

E1 = kQ1/r^2

Where:

k = 8.99 x 10^9 Nm^2/C^2

Q1 = 50.0 nC = 5.00 x 10^-7 C

r = 20.0 cm = 0.20 m

Therefore,

E1 = (8.99 x 10^9 Nm^2/C^2)(5.00 x 10^-7 C)/(0.20m)^2

E1 = 2.24 x 10^5 N/C

Hence, the electric field due to charge 1 at the origin is 2.24 x 10^5 N/C in the direction to the left.

To learn more about Coulomb's Law

Here: https://brainly.com/question/26892767

#SPJ4

The M9 service pistol failing to eject the cartridge is called Stovepipe.

When an empty cartridge case gets caught partway out of the ejection port instead of being thrown clear, it causes a stovepipe or smokestack in bolt-action, pump-action, semi-automatic, and fully automatic firearms that fire from a closed bolt.
Stovepipes are caused by insufficient cycling and incomplete ejection. Possible causes include: "Limp-wristing" is the practise of holding the gun so loosely that it almost points straight up during recoil. This prevents the slide from fully cycling.
The round was not loaded with enough powder to properly cycle the action, and the empty shell is now trapped between the slide and the chamber. The grip on the gun was insufficient to keep it steady as the action cycled after the shot.

Go through the given link below to know more about Stove pipe:-

https://brainly.com/question/11745492

#SPJ4

Current it draws when it is connected to a 120-V Voltage Source is calculated as 10A.

Electric power (P) of any appliance is defined as the product of the voltage applied on it (V) and the current that flows in it (I).

The rate at which work is done or energy is transferred in an electrical circuit is called electric power or we can also say that it is a measure of how much energy is used in a span of time.

Therefore, P=I*V.

We need to calculate the current and we have the power and the voltage.

Given a heater rated at 1200 W and connected to  120 V voltage source will draw a current of 1200 W / 120 V = 10 A.

To know more about electric power, refer

https://brainly.com/question/29199566

#SPJ4

B

Explanation:

I suggest option B for you but you could research more on it

The force that charge q1 exerts on q2 is opposite and equal in magnitude to the force that charge q2 exerts on q1.

What is charge?
Charge is a physical property of matter that can be either negative or positive. It is related to the electromagnetic force, and is measured in coulombs. Charge is the cause of electric fields and electric potential, which are important in many areas of physics and chemistry. Charge can be transferred from one object to another, and is conserved in any physical process. Charge can also be created from the motion of matter through a medium, such as when electrons are pushed from one material to another. Charge is always conserved, meaning that the net charge of a system will always be the same.

Therefore, The force that charge q1 exerts on q2 is opposite and equal in magnitude to the force that charge q2 exerts on q1.

To learn more about charge

Here: https://brainly.com/question/2373424

#SPJ4

A. Hypothesis (What do you believe will happen?) People who increased their caloric intake by 1000 calories per day are more likely to develop hypertension (high blood pressure).

Hypothesis is a process of generating testable predictions about a certain phenomenon. It is an educated guess or explanation of a certain phenomenon, based on available facts and evidence. It is the starting point for further investigation and helps to determine the outcome of a scientific experiment. Hypothesis helps to develop a framework of understanding and can be used to create further predictions. It is an essential step in the scientific method, as it helps to structure an experiment and provide a basis for further evaluation.

B. Experiment (Procedures that lead to a discovery or test a hypothesis.) An experimental group of 20 subjects will consume an extra 1000 calories per day from fast food, in addition to their normal daily caloric intake. A control group of 20 subjects will not consume an extra 1000 calories from fast food and will continue with their normal diet. The blood pressure of each subject in both groups will be recorded once per week for eight weeks.

C. Results (The outcome of the experiment.) After eight weeks, 70% of subjects in the experimental group had developed hypertension. In the control group, only 5% of subjects developed hypertension. The hypothesis was supported by the data; the increased intake of calories in the experimental group increased the likelihood of developing hypertension.

To learn more about Hypothesis
https://brainly.com/question/11555274
#SPJ4

The equilibrant force is 45 N, acting in the direction opposite to the net force.

The equilibrant force is the force that is required to balance all other forces acting on an object in a specific situation. To find the equilibrant force for the given forces, you need to determine the net force acting on the object.

The net force can be found by adding the individual forces acting on the object:

Net force = 53 N + 28 N - 12 N - 24 N = 45 N

Equilibrant force = - 45 N = 45 N, acting in the opposite direction of the net force.

In this case, the equilibrant force is 45 N, acting in the direction opposite to the net force.

To know more about equilibrant force, refer

https://brainly.com/question/8045102

#SPJ1

(a) Tensile strength can be calculated using the formula:

Tensile strength = Maximum load / Cross-sectional area

Tensile strength = 20,000 lb / 0.5 in2 = 40,000 psi

(b) Engineering strain can be calculated using the formula:

Engineering strain = (Change in length) / (Initial length)

Engineering strain = (0.25 * 2.0 in) / 2.0 in = 0.25

(c) True stress can be calculated using the formula:

True stress = Maximum load / Original cross-sectional area

True stress = 20,000 lb / (0.5 in2 * (1 + 0.25)) = 26,666 psi

(d) True strain can be calculated using the formula:

True strain = ln (1 + Engineering strain)

True strain = ln (1 + 0.25) = 0.2586

Find more about Tensile

brainly.com/question/14313776

#SPJ4

The direction of the electric field at point "A" is from left to right and the direction of the electric field at point "B" is from right to left. The direction of the electric field at point "C" is downward.

The electric field is a field that describes the force experienced by a charged particle due to the presence of other charged particles or electric charges. The electric field is a fundamental concept in electromagnetism and is used to understand and predict the behavior of charged particles in various situations.

Electric field lines are used to represent the direction of the electric field. They are lines that start from positive charges and end at negative charges. The direction of the electric field at any given point is the direction in which a positive test charge would be pushed if placed in the field. The closer the electric field lines are together, the stronger the electric field is in that region.

The electric field can be caused by a variety of sources, including point charges, distributed charges, and electric dipoles. The electric field can also be influenced by other factors such as conductors, insulators, and dielectrics.

To learn more about electric field please click on below link.

https://brainly.com/question/26446532

#SPJ4