starting at room temperature (25℃), approximately what temperature change is needed for diffusivity of a gas inside another gas (assuming gases are dilute and ideal) to go up by a factor of 10?

A total force of 8.0 units would be applied in the opposite direction of both ropes as a result.

An influence known as force can alter an object's motion, direction, shape, or resting state. It is one of physics' fundamental ideas. Contact forces and field forces are the two types of forces.

The normal force, air resistance, and friction are all examples of contact forces. Gravity, the electric force, and the magnetic force are all examples of field forces. The magnitude, direction, and duration of a force can all be measured.

A force's magnitude indicates its strength, and its direction indicates its direction of action. The amount of time a force is applied is its duration.

The knot must have zero net force in order to remain stationary. To put it another way, all of the forces must add up to zero. As a result, you will need to apply forces of 3.0 units in the first rope's opposite direction and 5.0 units in the second rope's opposite direction.

Learn more about force:

brainly.com/question/12785175

#SPJ4

No. After the collision, it is impossible for them to be at peace.

When two or more objects come into contact with one another and experience temporary force on one another, this is called a collision. Elastic and inelastic are the two categories under which it falls.

This kind of collision, in which some energy is lost, is known as an inelastic collision.

However, kinetic energy is not conserved in an inelastic collision even though momentum is. In everyday life, inelastic collisions predominate.

It is known as a perfectly inelastic collision when an inelastic collision meets all the requirements. In this instance, two objects collide and stick together, moving as one.

To know more about collision visit:

brainly.com/question/30271266

#SPJ4

The required amount of power left for mechanical work by the DC motor is calculated to be 10300 w.

The current drawn by the motor = 50 A

Voltage of the DC motor = 230 v

Power dissipated as heat = 1200 w

The formula to calculate power dissipated by the motor;

P = V I

where, P is power

V is voltage

I is current

So, putting the known values into the above equation, we have,

P = V I = 230 × 50 = 11500 w

As some amount of power is dissipated as heat, the power left for mechanical work is;

⇒ 11500 - 1200 = 10300 w

Thus, the required amount of power is 10300 w.

To know more about power:

https://brainly.com/question/23712735

#SPJ4

The final velocity of the object is 29.75 m/s.

Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).

The acceleration of the object = 3.5 m/s²

The initial velocity of the object = 0 m/s.

Time interval = 8.5 second.

Hence, form basic kinematics, we can write the final velocity becomes = initial velocity  + acceleration × time interval

= 0 + 3.5 × 8.5 m/s

= 29.75 m/s

Hence,  the final velocity of the object is 29.75 m/s.

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ1

Your question is incomplete but most probably the question was:

What is the final velocity of an object that accelerates from rest at 3.5m/s² for 8.5 s?

The average torque exerted on the disk by the hand is -5.49 Nm.

Torque can be defined as a force exerted at a distance from the axis of rotation.

To find the average torque exerted on the disk, we need to calculate the angular acceleration and then use the equation for torque:

Torque = I * alpha, where I is the moment of inertia and alpha is the angular acceleration.

First, let's find the angular acceleration:

Initial angular velocity = 35 rad/s

Final angular velocity = 0 rad/s

Time = 0.15 s

Using the kinematic equation for angular acceleration:

alpha = (Final angular velocity - Initial angular velocity) / Time

alpha = (0 - 35) / 0.15

alpha = -233.33 rad/s^2

Next, let's find the moment of inertia of the solid disk:

I = (1/2) * m * r^2

I = (1/2) * 0.165 kg * (0.215 m)^2

I = 0.0234 kg m^2

Finally, let's find the average torque:

Torque = I * alpha

Torque = 0.0234 kg m^2 * -233.33 rad/s^2

Torque = -5.49 Nm

Therefore, The average torque exerted on the disk by the hand is -5.49 Nm.

Learn more about kinematic equation here : brainly.com/question/28788270

#SPJ1

8.57cm is  the distance between thee point

Define distance .

The size or extent of the displacement between two points is referred to as distance. Keep in mind that the distance between two points and the distance traveled between them are not the same. The length of the entire journey taken to get from one point to another is the distance traveled.

Displacement is just the distance between the object's initial location and its final location. The amount of distance an object travels in a specific length of time is measured in terms of velocity.

d is [tex]\sqrt{x} (x2-x1)^2 + (y2-y1)^2[/tex]

x1 ,y1 is 5.0, 2.7

x2, y2 is -3.1, 5.5

d will be sqrt.(--3.1-5)^2 + (5.5-2.7)^2 i.e. 8.57cm

To learn more about displacement use link below:

https://brainly.com/question/14422259

#SPJ4

The cédula personal was optional during the Spanish period.

The cédula personal was a document used during the Spanish colonial period in the Philippines to keep track of the population and to collect taxes. It was a personal identification document that contained the holder's name, occupation, and tax status.

However, the requirement for a cédula personal was not strictly enforced during the Spanish period. While the Spanish government encouraged people to obtain one, it was not a mandatory requirement, and many people lived and worked without one.

This lack of strict enforcement was due to a number of factors, including limited resources for collecting taxes, the large size of the Philippines, and the limited number of government officials available to enforce the regulations.

To learn more about cedula, visit:

https://brainly.com/question/19254532#

#SPJ11

Complete Question:

Is the cedula personal was optional during the spanish period?

The resultant between two vectors will be given by the formula, R= √(2(F^2) + 2(F^2)cosθ)

In order to solve the equation for resultant between the two vectors F1 and F2 at an angle of θ, the following steps have to be followed:

The diagram for this problem is attached below

It is given in the problem that the magnitudes of forces F1 and F2 are equal,

F1= F2= F

In order to find the resultant force, the Parallelogram Law of Vector Addition comes into play.

This law states that if two vectors have the same initial point, and are dawn into a parallelogram, the summation of the two vectors will be the directed diagonal that starts at the initial point of the vectors.

Therefore, R= √(F1^2 + F2^2 + 2F1F2cosθ)

Now, since F1= F2= F,

R= √(F^2 + F^2 + 2(F^2)cosθ)

R= √(2(F^2) + 2(F^2)cosθ)

Learn more about Parallelogram Law of Vector Addition here brainly.com/question/26056717

#SPJ4

A mile is 1.609 kilometers long. Both the mille and the kilometer are units of measurement. A mile is larger than a kilometer, nevertheless.

Approximately 125 calories are burned by walking for thirty min at a quick pace for a distance between 2.0 to 2.5 kilometres (520 kiloJoules). This may not appear to be much, but if if walked for a whole year, five days a week, you would have burned more than 32,000 calories, or more than 5 kg, of fat.

Conclusions Walking at any speed results in the loss of total body fat, however in overweight individuals the reduction is more pronounced, immediate, and initially larger with slow walking. a stronger, deeper exercise impulse.

To know more about speed visit :

https://brainly.com/question/28224010

#SPJ4

Answer:

The cell wall surrounds the plasma membrane of plant cells and provides tensile strength and protection against mechanical and osmotic stress. It also allows cells to develop turgor pressure, which is the pressure of the cell contents against the cell wall.

To determine which of eight balanced identical-looking stones is slightly heavier than the others using three single-use scales, you can follow these steps:

Divide the stones into two groups of four.

By following these steps, you can determine which of the eight identical-looking stones is slightly heavier than the others using only three single-use scales.

Learn more about balanced here:

https://brainly.com/question/29707870

#SPJ4

The complete Question is:

How to determine which of eight identical-looking stones is slightly heavier than the others using three single-use scales?

The empirical formula of this CHO compound is C₅HO₆

The empirical formula is a formula for a compound that specifies the proportions of each element present, but it does not provide the overall number of atoms in the complex. The compound's lowest ratio between its constituent elements can be found there. To determine the precise number of atoms or the molecular formula of the compounds, we use the molar mass of the molecule.

The chemical equation below represents the burning of carbon and hydrogen in hydrocarbons:

CₓHₐOₙ ⇒CO₂ +H₂O

First, we divide each element's mass by its atomic mass to determine its mass;

Mass C= 12/44 x 0. 1486 g = 0.0405 g

Mass H = 2/18 x 0. 0609 g = 0.0067 g

Mass O = 0.1014 - 0.0405 - 0.0067 = 0.0542 g

Using molar masses we can calculate the moles:

0.0405 g / 12.0 g/mol = 0.003375moles C

0.0067 g / 1.01 g/mol = 0.00067 moles H

0.0542 g / 16.0 g/mol  = 0.003387 moles O

0.00067 is lesser, so use it to normalize to find the ratio.

The ratios are:

0.003375 moles C / 0.00067 = 5

0.00067 moles H / 0.00067 = 1

0.003387 O / 0.00067= 6 mole O

C:H:O

5:1:6

soh the empirical formula will be C₅HO₆

To know more about empirical formula visit:

brainly.com/question/11588623

#SPJ4

Answer:

B. It is the flow of electrons that have a negative charge to protons that have a positive charge.

Explanation:

Electric charge is a fundamental property of matter that arises from the presence or absence of electrons in an object. Electrons have a negative charge, while protons have a positive charge. When an object has an excess or shortage of electrons, it creates an electric charge. This charge can be measured and is used to explain various electrical and electronic phenomena, including the flow of electric current, the behavior of electric circuits, and the interaction of charged objects with each other. The flow of electrons from one charged object to another is what creates an electric current, which is a flow of electric charge. Thus, the best definition of electric charge is the flow of electrons that have a negative charge to protons that have a positive charge.

The weight of the box is 120N and work done is 432J.

We know that weight is just the force.

Weight  = F = mg

where, m = mass of the body = 12kg

            g = acceleration due to gravity = 10 m/s^2

Putting these values in above equation we get : F = 120 N

So, the weight of the box is 120N.

We know that work is the product of the component of the force in the direction of the displacement and the magnitude of this displacement.

Now Work done by an object is given by : W = F.d

where,

F = force acting

d = displacement = 3.6 m

Putting these values in above equation we get: W = 120 * 3.6 = 432J

To know more about work visit:

https://brainly.com/question/30127810

#SPJ4

A truck travels on a straight road at a velocity of 17 meters per second. Over 20 seconds, it accelerates uniformly to 27 meters per second. The acceleration of the truck was 0.5 m/s^2

The velocity of the truck after 20 seconds is 27 m/s and its initial velocity was 17 m/s, so the change in velocity is:

Δv = 27 m/s - 17 m/s = 10 m/s

The acceleration can be calculated as the change in velocity divided by the time it took to change, so:

a = Δv / t = 10 m/s / 20 s = 0.5 m/s^2

Acceleration is a measure of the rate of change of velocity over time. It is a vector quantity, meaning it has both magnitude and direction, and is defined as the derivative of velocity with respect to time. In other words, acceleration is the rate at which an object's velocity is changing. If an object is moving in a straight line and its velocity is increasing, then it is accelerating. If the velocity is decreasing, then the object is decelerating.

Acceleration has units of meters per second squared (m/s^2). Positive acceleration means an increase in velocity, while negative acceleration means a decrease in velocity. For example, when an object is accelerating upwards, its acceleration is positive, while when it is falling, its acceleration is negative.

To learn more about Acceleration  visit here:

brainly.com/question/3046924

#SPJ4

To calculate the volume of a gas, apply the Ideal Gas Law: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature. To calculate the smallest and largest volumes of a gas, first determine its pressure, temperature, number of moles, and ideal gas constant. Then, using the Ideal Gas Law, you can change the pressure and temperature and calculate the volume.

A volume measurement is a three-dimensional spatial measurement. It is typically quantified statistically using SI-derived units or other imperial or US customary units. The definition of volume is connected to the concept of length. The space filled by an item within the limitations of three-dimensional space is defined as volume. It is sometimes referred to as the object's capacity.

To know more about volume,

https://brainly.com/question/10831664

#SPJ4

If the thermometer reads the outside temperature at 70.0 °f, then it is  21.11 Celsius.

The degree of hotness or coldness of an object can be termed as Temperature. THERMOMETER are the instruments used to measure it . There are different units of measuring temperature which are interconvertible. The units are Fahrenheit (°F), Celsius (°C), Kelvin (K) etc.

In this question, the thermometer reads 70°F. To convert this temperature reading to °C, we use the formula:

°C] = ([°F] − 32) × 5/9

Hence,

[°C] = (70− 32) × 5/9

[°C] = (38) × 5/9

[°C] = 190/9

= 21.1 °c

Learn more about thermometer:

brainly.com/question/17770038

#SPJ4

The refractive index and the extinction coefficient of a material can be used to calculate its complex permittivity, which is a measure of the material's ability to store electric energy.

It is defined as the ratio of the electric flux density (D) to the electric field strength (E) in a vacuum and has units of farads per meter (F/m). In a material, the electric field is partially screened by the material's electrons, leading to a reduction in the effective electric field.  The complex permittivity is given by the following equation:

ε = ε' - jε'' = n^2 - jk,

where ε' is the real part of the permittivity, ε'' is the imaginary part of the permittivity, n is the refractive index, and k is the extinction coefficient.

So, to obtain the real and imaginary parts of the permittivity, one can simply use:

ε' = n^2

ε'' = k

where n and k are the known refractive index and extinction coefficient, respectively.

To know more about permittivity refer to:

brainly.com/question/30403318

#SPJ4

To determine the direction of the force on +q in the figure, given that Case I qa = qb = 7.5 μC and qc = qd = 7.5 μC, you need to:

(a) Draw the forces on q due to qa, qb, qc and qd in your notebook

(b) Use symmetry to find the direction of the net force

Hint: for each force, draw the x and y components.

The process involves two steps: (a) drawing the forces on q due to charges qa, qb, qc and qd in your notebook and (b) using symmetry to find the direction of the net force. For each force, you need to draw the x and y components to help you visualize the net force.

Find more about Force

brainly.com/question/30258441

#SPJ4

Answer:

12 m/s

Explanation:

The final speed of an object that is subjected to uniform acceleration can be calculated using the equation:

v^2 = u^2 + 2as

where v is the final speed, u is the initial speed (in this case, 0 m/s since the object starts from rest), a is the acceleration (4.0 m/s^2 in this case), and s is the distance traveled (18.0 m in this case).

Plugging in the values, we have:

v^2 = 0 + 2 * 4.0 * 18.0

v^2 = 144

v = √(144)

v = 12 m/s

So the final speed of the object is 12 meters per second.

If the cylinder seems to have a 64 cubic inch volume, its radius becomes R = 8/2, as well as 4.

The three-dimensional shape of a cylinder is made up of two equal circular bases connected by a curved surface. The correct cylinder is created when the vertices of the round bases cross each other. The axis, which represents the height of a cylinder, has been the line segment that connects the two centres.

A cylinder's volume (V) is equal to the sum of its base's area (B) and height (H) (H)

Given V = 64(π)

B = (π) * [diameter(D)/2]^2 * (H)

Given D = 2 * H

V = π * (D/2)^2 * H, then

V = π * (2 * H/2)^2 * H = π * H^3

π * H^3 = 64π

H^3 = 64

H = 4

D = 8

Radius(R) = D/2

R = 8/2 = 4

To know more about cylinder visit:

brainly.com/question/2898479

#SPJ4

A loaded bus is more comfortable than an empty bus due to the lower center of gravity of the loaded bus, also a loaded bus has more inertia.

Comfort refers to the stability or the minimum rate of change of acceleration. A loaded bus has a lower center of gravity. So it has a minimum chance of overturning. On the other hand, an empty bus having a higher center of gravity is more susceptible to overturning.

A loaded bus has more inertia than the empty bus does. For the same force acting on both the buses, loaded bus will experience smaller accelerations. The loaded bus experiences almost zero sideways acceleration or vertical acceleration, and the forward & backward acceleration is also much smoother and better - controlled.

To know more about center of gravity, here

https://brainly.com/question/20662119

#SPJ4

The change in the object's velocity is: 6.25 m/s

It is the physical magnitude that expresses the effort necessary to move the mass of one kilogram with an acceleration of one meter per second squared, this is expressed in units of the international system in Newton.

To solve this exercise, the formulas and procedures to be applied are:

Where:

Information about the problem:

Applying the force formula and isolating the acceleration, we get:

a= F/m

a= 4.5 n /7.2 kg

a=0.625 m/s²

Applying the final velocity formula, we have:

vf = 0 m/s + (0.625 m/s²* 10.0 s)

vf = 0 m/s + 6.25 m/s

vf = 6.25 m/s

Learn more about force at: brainly.com/question/12970081

#SPJ4

The Kinetic energy of the nonrelativistic neutron which has a De Broglie wavelength of [tex]9.9 * 10^{-12}[/tex] m is [tex]8.375 * 10^{4}[/tex] Eu.

A moving item or particle might have power of a certain type called kinetic energy. An item gains kinetic energy when work, which involves the transfer of energy, is done on it by exerting a net force. A moving item or particle's mass and motion speed determine its kinetic energy.

The energy an object has as a result of motion is referred to as kinetic energy. It is defined as the effort needed to move a body of a particular mass from rest to the desired velocity. Unless its speed changes, the body retains the kinetic energy it gained during acceleration.

[tex]lambda D=9.9[10^{-12} ]\\h=6,626[10^{-34} ]\\m= 1.675[10^{-27} \\KE= \frac{h^{2} }{2m[lambda D^{2} } ]\\=13.4[10^{-15} ] joule\\KE = 8.375[10^{4} ]eu[/tex]

Learn more about kinetic energy here:

brainly.com/question/29552176

#SPJ4

Answer:

Explanation:

Density = m/v

             = 48.4/8.5

             = 5.69411 gm/cm^3

Specific gravity = Density of object/ Denstity of water at 4'C

                           = 5.69411

The density of the object is 57142 g/L and its specific gravity is 57142

To find the density of the object, we need to calculate its volume. We can use the displacement method to determine the volume of the object. The volume of the object is equal to the difference in water level before and after immersion, which is 38.5 mL - 30.0 mL = 8.5 mL. We can convert this volume to cm^3 by multiplying by 10^-3.

The density of the object is given by the formula:

density = mass/volume

where the mass of the object is 48.40 grams.

Plugging in the values,

density = 48.40 g / (8.5 x 10^-3 L) = 57142 g/L

The specific gravity of the object is defined as its density relative to the density of water, which is 1000 kg/m^3 or 1 g/mL. The specific gravity of the object can be calculated as follows:

specific gravity = density of object/density of water

specific gravity = 57142 g/L / 1 g/mL = 57142

So, the density of the object is 57142 g/L and its specific gravity is 57142.

Find out more about Specific gravity

brainly.com/question/24872196

Answer: 1365 miles.

Explanation: Good evening.

There is no formula to determine how many miles a plane flies in a certain set of time. If it gives you the time, and distance, all you have to do is multiply. It tells you to find how many miles it traveled in total.

Answer: The increase is due to natural growth of the lens.

Explanation:

The four methods of acquiring knowledge are observation, experience, reasoning, and education.

Observation involves gathering information through the senses and paying attention to what is happening in the environment. Experience involves learning through personal encounters, such as practical work or life events. Reasoning involves using logic and critical thinking to draw conclusions and make decisions.

Education involves acquiring knowledge through formal instruction and learning, such as in a school setting or through reading and studying. All four methods are important and can be used in combination to acquire a deep and well-rounded understanding of a subject.

Observation and experience provide hands-on and practical knowledge, while reasoning and education provide theoretical and abstract knowledge. By using a combination of these methods, individuals can broaden their understanding and knowledge of the world around them.

To know more about critical thinking click on the link below:

https://brainly.com/question/12980631#

#SPJ11

From given names Quartz and Gold nugget is the mineral.

Minerals are the basic building blocks of rocks and are extremely important to humans economically and commercially. Geologists therefore require a set of qualities to distinguish between what constitutes a mineral and what constitutes a man-made object (such as plastic, for example). Inorganic, solid, naturally occurring, made of an ordered crystalline structure, and capable of being described by a chemical formula are the requirements that identify matter as a mineral.

One of the most well-liked and well-known minerals, gold has long been valued for its worth and unique qualities. The majority of the naturally occurring gold specimens discovered since ancient times have been smelted for use in manufacturing.

Learn more about Minerals

brainly.com/question/18078524

#SPJ4

The relationship between wavelength and frequency of a wave is well established in physics and is described in the provided search results. According to the frequency of a wave multiplied by its wavelength gives the speed of the wave. In 2, the relationship is described using the equation frequency x wavelength = speed of light, where frequency (v) and wavelength (λ) are related to the speed of light (c).

The relationship between frequency and wavelength is also described in 3, where the wave speed is equal to the product of its frequency and wavelength. This is expressed as v = f * λ, where v is the wave speed, f is the frequency, and λ is the wavelength. In summary, the wavelength and frequency of a wave are directly proportional to each other, and the product of their values gives the speed of the wave.

Find more about  wavelength and frequency

brainly.com/question/15610117

#SPJ4